SECTION ONE

sealants & tapes

1

SEALA

NTS &

TAPES

sealants& tapes

NEUTRAL SILICONE

Sanitary Silicone One part, high modulus, long skin time neutral cure sanitary silicone sealant. Resists mildew even when exposed to prolonged hot and humid environments. Suitable for glass, ceramics, aluminium, masonry, stone, concrete, most metals and many plastics.Colours available: Clear, White, Almond. 300ml.

CODE

SCS2600

Silicone N-10Neutral, one-part moisture curing silicone. Designed for general purpose glazing and sealing applications. Weathering and UV resistance is excellent. It is unaffected by high and low temperature. Suitable for glass, ceramics, aluminium, GRP, granite, concrete, galvanised steel, and many plastics.Colours available: Clear, Black, White, Light Grey, Dark Grey, Aluminium Grey, Brown, Off White, Sandstone. 300ml.

CODE

SCS2700

Silicone NOne part, low modulus, fast cure, neutral cure silicone sealant. Forsealing and weather proofing all building, glazing, roofing, rainwaterand cladding joints. Recommended for use with Zincalume, Galvabond,Colourbond and Marviplate. Adheres to glass, aluminium, ceramics,masonry, concrete, stone, most metals and most painted and plasticsurfaces. Suitable for kitchen splashbacks, butt glazing.Colours available: Clear, Black, White, Aluminium Grey. 300ml.

CODE

SCS2500

2

Gla

zing

&Fa

bric

atio

n

SEA

LAN

TS &

TA

PES

NEUTRAL SILICONE

GEN10GEN10 is a one part, neutral cure silicone sealant. For sealing and weather proofing all building, glazing, roofing, rainwater and cladding joints. It is recommended for use with Zincalume, Galvabond, Colorbond and Marviplate. It is potable water approved. Adheres to glass, aluminium, ceramics, masonry, concrete, stone, most metals and most painted and plastic surfaces. Colours available: Clear, Black, White, Grey. 300ml.

CODE

GEN10

Plumbers SiliconeOne part premium quality neutral cure silicone sealant. Designed for plumbers & roofers for spouting, guttering, flashing, wall cladding and rainwater. Applications where long term reliability is required. Unaffected by high and low temperatures and its superior physical properties are retained after many years of exposure. Recommended for use with Zincalume, Galvabond, Colourbond and Marviplate. Potable water approval. Suitable for coated steel, aluminium, metal water tanks, metal lap joints, wall cladding, masonry ceramic tiles, cement roof tiles and air-conditioning units.Colours available: clear, grey. 300ml.

CODE

PMATE

Sealproof 2000Weatherproofing one part silicone sealant for use in most common weatherproofing applications on a wide variety of materials. A low modulus, long life, formed in place silicone rubber building joint and glazing sealant giving 50%± joint movement. Also used to seal assemblies of metals, masonry, concrete, coated surfaces, plastics, wood and other common construction materials. Colours available: Black, White & Grey. 300ml.

CODE

SCS2000

3

SEALA

NTS &

TAPES

sealants& tapes

Construction Silicone - Acetic cureOne part sealant widely used for new construction, remedial work and maintenance. No primer required on glass but may be required on other substrates. Proven performance, high strength and outstanding adhesion and long life.Colours available: Clear. 300ml.

CODE

SCS1200

OTHER SEALANTS & ADHESIVESGap-SealPaintable acrylic sealant - water washup. For sealing masonry, plasterboard,Door and wall cracks, cornice cracks, window and door cracks. Adheres toWood, concrete, brick, plasterboard & many other surfaces. Colours available: White. 300ml.

CODE

GE91A

Bond-FastConstruction adhesive, fast drying, high strength. Suitable for floor & wallpanels, wood, plasterboard & chip board, aluminium, iron and steel. Concrete, cement sheeting, masonry & many other substrates. 300ml.

CODE

BONDFAST

ACETIC SILICONE

Contractors Silicone - Acetic cureOne part silicone. For general purpose glazing and sealing applications. It is unaffected by high and low temperatures and its superior physical properties are retained after many years of exposure.Colours available: Clear, Black, White. 300ml.

CODE

SCS1000

Sanitary Silicone - Acetic cureSealant resists mildew even when exposed to prolonged hot and humid environments. The sealant does not provide or maintain a nutrient surface for fungus. This sealant effectively seals around bathtubs, shower stalls, wall fixtures, rimless sinks, kitchen and bathroom fixtures and may be used for ceramic tile grouting and spotting. For maintenance Sanitary Sealant may be used outdoors. Colours available: Clear, White. 300ml.

CODE

SCS1700

4

Gla

zing

&Fa

bric

atio

n

SEA

LAN

TS &

TA

PES

SILICONE - INDUSTRIAL GRADE

High Temperature Industrial Grade Adhesive SealantOne part, high temperature application, acetic cure industrial grade sealant. Cures to a flexible rubber when exposed to moisture in the air. Has excellent resistance to weathering, temperature extremes (-60°C to + 260°C, intermittently +315°C), moisture, vibration, ultra-voilet and many chemicals. Primeless adhesion to many metals including aluminium, stainless steel, glass. ceramics and many plastics. 300ml.Colours available: Red only.

CODE COLOUR

RTV106R RED

Neutral Cure Industrial Grade Adhesive SealantOne-component, silicone rubber that cures on exposure to atmospheric moisture at room temperature. Seals vertical joints bonding dissimilar materials such as metal to plastic and glass to aluminum electrical insulation of wires and terminals and formed-in-place gasketing. Primerless adhesion to many metals and plastics. Non-corrosive to aluminum and steel per MIL-A-46146A+. Lower odour cure than conventional silicone sealants. Retains elastomeric properties at temperatures of -60°C(-75°F) to 204°C (400°F) for long periods and to 260°C (500°F) for short periods. Excellent weatherability, ozone, and chemical resistance.

CODE COLOUR

RTV128 CLEAR

Acetic Cure Industrial Grade Adhesive SealantExtremely versatile. Cures to a tough, durable, resilient silicone rubber on exposure to atmospheric moisture at room temperature. Capability to cure at room temperature and ambient humidity. Low temperature flexibility, high temperature performance. excellent weatherability and ozone and chemical resistance. Retains elastomeric properties at temperatures of -60°C(-75°F) to 204°C (400°F) for long periods and to 260°C (500°F) for short periods. Excellent for gasketing and general industrial applications.

CODE COLOUR

RTV102 WHITE

RTV103 BLACK

RTV108 CLEAR

5

SEALA

NTS &

TAPES

sealants& tapes

Sika Boom FRSika Boom®-FR is a one part, high yield, fire rated, polyurethane foam.Sika Boom-FR can be used for filling gaps and voids. blocking out dust, noise and draft. Thermal installation of window and door frames.Thermal insulation of pipes. Joint fire rating can only be achieved when designed with respect to the fire report (please see report for various joint orientations). High yield, easy application suitable for application at lower temperatures (+5ºC) Fast curing, excellent thermal insulation. Age resistant, CFC/HFC free, resistant to temperatures ranging from -40ºC to +100ºC

CODE

SIKABOOMFR

Sika Boom APSika Boom-AP is a fast curing expanding foam. It can be used as a fixing and insulating foam. It can be used for filling gaps and voids, blocking out dust, noise and draft, installation of window and door frames, insulation of pipes. Can be used when held upside down. Suitable for use outside. Can be cut, sanded and painted. Has excellent adhesion to most substrates. Quick and easy gap filler. Reaches difficult access areas that need to be filled.

CODE

SIKABOOM

Sikaflex-11FCHigh strength polyurethane formula, provides a highly effective bonding and sealing product, which demonstrates excellent flexibility, long life and weather proofing qualities. Substrates must be clean, dry and free of oil, grease and loose particles. Badly adhering coatings and friable surfaces must be ground off and the joint to be blown out with oil free compressed air. Available in 310ml or 600ml.Colours available: Black, Beige, Grey and White.

CODE

SIKA11FC

Sikaflex-PROCures to a tough, durable, flexible consistency and will last much longer then silicone and acrylic sealants when used in harsh weather conditions. Badly adhering coatings and friable surfaces must be ground off and the joint to be blown out with oil free compressed air. 310ml.Colours available: Black, Grey, Beige, Off White, White, Pale Brown, Dark Grey, Dark Amber, Redwood, Brick Red and Sandstone. Available in 310ml or 600ml.

CODE

SIKAPRO

SIKA SEALANTS

6

Gla

zing

&Fa

bric

atio

n

SEA

LAN

TS &

TA

PES

Sikaflex-252Sikaflex-252 is a non-sag, 1 component polyurethane adhesive of stiff, paste-like consistency that cures on exposure to atmospheric moisture to form a durable elastomer. Sikaflex-252 exhibits excellent adhesive properties and a high degree of mechanical strength. Sikaflex-252 is suitable for structural joints that will be subjected to high dynamic stresses. Suitable substrate materials are timber, metals, particularly aluminium (including anodized finishes). Colours black & white. 300ml.

CODE

SIKA252

Sikaflex-221High quality multi purpose, non-sag 1-C polyurethane sealant that cures on exposure to atmospheric humidity to form a durable elastomer. 1-C formulation elastic, low odour, resistant to ageing and weathering exposure, non-corrosive, can be overpainted, can be sanded, NSF-approved for incidental food contact. Bonds well to a wide variety of substrates and is suitable for making permanent elastic seals of high adhesive strength such as metals, metal primers and paint coatings (2-C systems), ceramic materials and plastics. 300ml cartridge or 600ml sausage.Colours available: White, Grey or Black.

CODE

SIKA221

Sikasil SG-20 Structural Glazing SiliconeNeutral curing silicone adhesive, which combines mechanical strength with high elongation. It adheres to a wide range of substrates. Meets requirements of EOTA ETAG 002 (carries ETA), EN 13022, ASTM C 1184 Fire rated (EN 11925-2 / DIN 4102-B1) Outstanding UV and weathering resistance excellent adhesion to glass, metals, coated metals, plastics and wood, used for structural sealant glazing, bonding of solar modules and other high demanding industrial applications.300ml cartridge or 600ml sausage.

CODE COLOUR

SIKASG20 BLACK

SIKA SEALANTS

Sikaflex-227One component polyurethane sealant designed for automotive body repair and maintenance. Suitable for sealing, seam sealing, simple bonding and vibration and sound deadening in crash body repairs. Bonds to metals, painted and non painted plastics. Resistant to fresh water, aqueous cleaning solutions and mineral oils. Drip free, low odour and can be painted over. Colours available: Black & White.

CODE

SIKA227

7

SEALA

NTS &

TAPES

sealants& tapes

SIKA SEALANTS

Sikasil WS305CNNeutral curing silicone sealant with a high movement capability and excellent adhesion to a wide range of substrates. Can be used for weatherproofing and sealing applications where durability under severe conditions is required. Particularly suited as a weather seal for curtain walling and windows. This product is suitable for professional experienced users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.Colours available: Black, White, Grey, Clear, Beige & Grey 300mL.Black only in 600mL.

CODE

SIKA305

SikabondHigh strength contact adhesive that will not slump on vertical surfaces. It can be used as a one way liquid adhesive or a two contact adhesive on a variety of building materials. Excellent adhesion to wall and floor panels, wood, plasterboard and chipboard, aluminium, iron, steel, concrete, cement sheeting (CFC) and masonry with fast drying time.

CODE

SIKABOND

Anchorfix 1Solvent and styrene free polyester based 2-component anchoring adhesive. Suitable to be used as an anchor adhesive for reinforced bar, threaded rod, anchor bolts and fastening systems. Fast curing (as low as 25 mins, hardens in 3-5 mins). Easy to apply using a standard cartridge gun. Consistent mixing through static nozzle. Excellent adhesion to concrete, natural stone, solid rock, hollow and solid masonry. Can be used close to concrete edges and for close anchor spacing.

CODE

SIKA1CTG

Sikasil COne part neutral curing silicone sealant suitable for indoor andoutdoor applications. Suitable for glazing and weatherproofing applications of glass, metals, painted surfaces, wood, acrylics, polycarbonates, ceramic tiles and for most sanitary applications. Provides primerless adhesion to a wide range of substrates. Long term resistance to fungus. Very good UV and weathering resistance, low odour, non corrosive, high elasticity and flexibility.Colours available: Black, White, Clear, Grey & Mid-grey 300mL.

CODE

SIKASILC

8

Gla

zing

&Fa

bric

atio

n

SEA

LAN

TS &

TA

PES

Backing RodAllows moisture & air access to the front & back of the joint allowing faster, uniform curing times. Gases can escape through the open cell rod preventing gas release into the sealant which causes bubbling.

Orange - Open CellOpen cell foam rod.

CODE DESCRIPTION

FBROR-10 OPEN CELL 10mm x 200M

FBROR-16 OPEN CELL 16mm x 150M

FBROR-22 OPEN CELL 22mm x 100M

FBROR-29 OPEN CELL 29mm x 60M

FBROR-38 OPEN CELL 38mm x 30M

FBROR-50 OPEN CELL 50mm x 20M

SikaBond® -TechGripHigh strength multipurpose polyurethane glue. Super strong bond. Sandable, paintable and stainable. 100% waterproof. Excellent adhesion to timbers, metals, glass, ceramics, rubber, concrete, cement, stone and styrene. Environmentally friendly. Great resistance against corrosion from solvents and chemicals.

CODE DESCRIPTION

418051 SikaBond®-TechGrip 125g

418052 SikaBond®-TechGrip 500g

White - Closed CellClosed cell foam rod used in applications where a joint filler is required. Typical applications include shop fronts and curtain wall construction. Can also be used for dust sealing, draught sealing, sealing skylights etc. Provides water proofing under 30% compression, is highly resistant to weathering, ultraviolet rays.

CODE DESCRIPTION

LITLON-06W CLOSED CELL 6mm x 250M

LITLON-10W CLOSED CELL 10mm x 150M

LITLON-25W CLOSED CELL 25mm x 50M

LITLON-13W50 CLOSED CELL 13mm x 50M

LITLON-15W50 CLOSED CELL 15mm x 50M

LITLON-20W50 CLOSED CELL 20mm x 50M

LITLON-30W50 CLOSED CELL 30mm x 50M

SIKA SEALANTS

9

SEALA

NTS &

TAPES

sealants& tapes

V1300 Mounting Tape

CODE DESCRIPTION

V1330 0.8mm x 61M

V1362 1.6mm x 61M

V13124 3.2mm x 30.5M

White polyurethane mounting tape, pressure sensitive acrylic adhesive both sides. All internal and external mounting. Absorbs vibration and mitigates effects of expansion and contraction. Suitable for mirror mounting in conjunction with silicone.

V2800 Mounting Tape

CODE DESCRIPTION

V2830 0.80mm x 61M

V2845 1.14mm x 61M

V2862 1.60mm x 61M

V2890H 2.3mm x 45.7M

V28120H 3.2mm x 15.2M

Energy dissipating closed cell polyurethane, high performance acrylic adhesive both sides. External mounting in automotive. Dissipates vibrations and distributes stresses. Internal & external mounting. Common uses: Colonial bars, dissimilar metals, metal to metal, glass to metal.

V2000 Mounting Tape

CODE DESCRIPTION

V2020 0.6mm x 61M

Black high density closed cell polyurethane, high performance acrylic adhesive both sides. All internal and external mounting. Vibration dampening. High shear strength and superior aging qualities. Die cut gasket.

FIRM

MED/FIRM

FIRM

MED/FIRM

EZA1000 - High Performance Acrylic Tape

CODE DESCRIPTION

EZA1062 1.5mm x 33M

EZA1090 2.3mm x 16.5M

Grey, high bond performance, double sided tape withstands heat & cold, wind loading. Faster to apply than silicone : ready to use, no mixing, no curing. Pre apply to framing and stiffeners in inventory. Clean, neat, no mess to clean up. Replaces mechanical fasteners & welded studs. EZ release liner protects the adhesive until you’re ready to use it. Long shelf life, 2.3mm suitable for aluminium cladding panels.

MINIMUM SLITTING WIDTH: 6mm

DOUBLE SIDED ADHESIVE TAPES

10

Gla

zing

&Fa

bric

atio

n

SEA

LAN

TS &

TA

PES

FIRM

DOUBLE SIDED ADHESIVE TAPES

V2200 Structural Glazing Tape

CODE DESCRIPTION

V2204 3.2mm x 15.2M

V2206 4.8mm x 15.2M

V2208 6.4mm x 15.2M

V2210 8mm x 7.6M

V2212 9.5mm x 7.6M

Black, semi-rigid open cell polyurethane spacer, PSA both sides. Vertical only structural applications.Density: 352kg.Note: Open cell allows for silicone curing, cannot be used as a seal against water & air.

V2100 Structural Glazing Tape

CODE DESCRIPTION

V2104 3.2mm x 15.2M

V2106 4.8mm x 15.2M

V2108 6.4mm x 15.2M

V2110 8mm x 7.6M

V2112 9.5mm x 7.6M

Dark grey/black high strength, rigid, open cell polyurethane spacer, pressure sensitive adhesive (PSA) both sides. (Also available in single sided application). Vertical and horizontal structural applications. Density: 497kg.Note: Open cell allows for silicone curing, cannot be used as a seal against water & air.

V990 Standard Glazing Tape

CODE DESCRIPTION

V992 1.6mm x 61M

V994 3.2mm x 30.5M

V996 4.8mm x 15.2M

V998 6.4mm x 15.2M

Black closed cell PVC, PSA both sides. Also available in white upon request. Interior and exterior glazing sealant. High movement residential and commercial glazing. Heating and ventilation systems. Vibration dampening. Die cut gaskets. Note: Not recommended for use in conjunction with silicone or structural window glazing systems.

MEDIUM

VERY FIRM

11

SEALA

NTS &

TAPES

sealants& tapes

V710

CODE DESCRIPTION

V712 1.6mm x 61M

V714 3.2mm x 30.5M

V716 4.8mm x 15.2M

V718 6.4mm x 15.2M

V7112 9.5mm x 7.6M

Soft, swirl-free grey closed cell PVC. Water seal, low-rise, residential glazing. Ideal for die cut gaskets and use with screws.

V760

CODE DESCRIPTION

V762 1.6mm x 61M

V764 3.2mm x 30.5M

V766 4.8mm x 15.2M

V768 6.4mm x 15.2M

Firm grey closed cell PVC. Critical water seals under extreme conditions, vibration dampening. Domestic/commercial window glazing tape. Die cut gaskets.

FIRM

V740

CODE DESCRIPTION

V742G/B 1.6mm x 61M GREY/BLACK

V744G/B 3.2mm x 30.5M GREY/BLACK

V746G/B 4.8mm x 15.2M GREY/BLACK

V748G/B 6.4mm x 15.2M GREY/BLACK

V7412G/B 9.5mm x 7.6M GREY/BLACK

V7416G/B 12.7mm x 7.6M GREY/BLACK

Medium black or grey closed cell PVC. Domestic window glazing tape, die cut gaskets and general sealing.

MEDIUM

MEDIUM

V730

CODE DESCRIPTION

V734 3.2mm x 30.5M

V736 4.8mm x 15.2M

V738 6.4mm x 15.2M

V7312 9.5mm x 7.6M

V7316 12.7mm x 7.6M

V7324 19.0mm x 4.6M

Soft grey closed cell PVC. Light, dust, air and water seal for irregular and flimsy substrates. Acoustic applications. Air conditioning or coldroom seals.

SOFT

PVC SINGLE SIDED ADHESIVE TAPES

12

Gla

zing

&Fa

bric

atio

n

SEA

LAN

TS &

TA

PES

V820

CODE DESCRIPTION

V824 3.2mm x 30.5M

V826 4.8mm x 15.2M

V828 6.4mm x 15.2M

V8212 9.5mm x 7.6M

V8216 12.7mm x 7.6M

V8224 19mm x 6.1M

V8229 22mm x 4M

Super soft black semi-closed cell PVC. Very irregular and flimsy substrates. Meets FMVS302 flammability standard. Ceiling & wall system, partitioning, dissimilar metals, 16mm non adhesive also available. Patio to frame back channel tape.

V780

CODE DESCRIPTION

V782 1.6mm x 61M

V784 3.2mm x 30.5M

V786 4.8mm x 15.2M

V788 6.4mm x 15.2M

V7812 9.5mm x 7.6M

Medium to firm black closed cell PVC excellent weathering properties. Critical water seals under extreme conditions. Automotive approved. Meets FMVS302 flammability standard. Air conditioning flange seals, acoustic partitions, dissimilar metals.

MEDIUM

V770

CODE DESCRIPTION

V774 3.2mm x 30.5M

V776 4.8mm x 15.2M

V778 6.4mm x 15.2M

V7712 9.5mm x 7.6M

V7716 12.7mm x 7.6M

Soft black closed cell PVC. Light, dust, air and water seal for irregular and flimsy substrates. Meets FMVS302 flammability standard. Ceiling & wall systems. Closed cell black air conditioner flange seals, acoustic partitions, dissimilar metals.

SOFT

VERY SOFT

V860

CODE DESCRIPTION

V862 1.6mm x 46M

V864 3.2mm x 22.8M

V866 4.8mm x 15.2M

V868 6.4mm x 15.2M

V8612 9.5mm x 7.6M

Firm/high density, black, closed cell. Critical water seals under extreme conditions. Vibration dampening. Die cut gaskets.

FIRM

PVC SINGLE SIDED ADHESIVE FOAM TAPES

13

SEALA

NTS &

TAPES

sealants& tapes

FS470 - Nitrile/Neoprene

CODE DESCRIPTION

FS471 1.6mm x 25M

FS473 3.0mm x 25.0M

FS476 6.0mm x 12.5M

FS479 9.0mm x 8M

FS4712 12.0mm x 6M

FS4716 16mm x 6M

Firm black closed blend of nitrile and neoprene. Water seal for extreme conditions. Switchboard closures with UL94 approval. High temperature critical closures. All closure applications requiring constant opening and closing. Automotive gaskets and seals. Insulation and weather stripping.

FS480 - Nitrile/Neoprene

CODE DESCRIPTION

FS483 3.0mm x 15M

FS486 6.0mm x 10M

FS489 9.0mm x 9M

FS4812 12.0mm x 7.5M

Medium hardness, black, closed cell blend of vinyl and nitrile and neoprene. General water seal and closure applications. Switchboard and thermal applications. Automotive gaskets and seals. Insulation and weather stripping.

CLOSURE TAPES

FIRM

FS630 - Ethylene propylene diene monomer (EPDM)

CODE DESCRIPTION

FS633 3mm x 15M

FS636 6mm x 10M

FS639 9mm x 10M

FS6312 12mm x 7.5M

Closed cell black. Water, air & dust seal for extreme conditions requiring higher temperature tolerance in closure applications, automotive gaskets and seals, insulation etc. Excellent shape retaining memory.Density: 80kg. Temperature tolerance: 120°C max.

FS640 - EPDM - Ethylene propylene diene monomer (EPDM)

CODE DESCRIPTION

FS643 3mm x 15M

FS646 6mm x 10M

FS649 9mm x 10M

FS6412 12mm x 7.5M

Closed cell black. Water, air & dust seal for extreme conditions requiring higher temperature tolerance with firmer, higher density tape in closure applications, automotive gaskets and seals, insulation etc. Excellent shape retaining memory. Density: 120kg. Temperature tolerance: 120°C max.

FIRM

MEDIUM

MEDIUM

14

Gla

zing

&Fa

bric

atio

n

SEA

LAN

TS &

TA

PES

PU600 - Xpand PUR Sealing Tape

CODE DESCRIPTION

PU6001 6-15 x 4.3M

PU6002 9-20 x 3.3M

PU6003 11-25 x 2.6M

PU6004 18-34 x 3.3M

PU626 26-42 x 2.6M

PUR sealing tape impregnated with a fire resistant polymeric dispersion. Specially designed for joints in buildings up to 328ft high, in accordance with DIN 18055.

BCF - Butyl Coated Foam Tape

CODE DESCRIPTION

BCF6 6mm x 17M

BCF8 8mm x 13M

BCF10 10mm x 11M

BCF12 12mm x 8M

Compressible PVC foam inner core with coating of high tack butyl. Conforms to corner radiusing and irregular contours. Resists cold without cracking, low moisture vapour transmission rate. Seals against water penetration. Easy release liner for clean application. Typical applications include appliance seals, automotive seals, commercial refrigeration, metal building, prefabricated construction, marine sealing, recreational vehicle window and roof seals, fixed modular windows and cabinet duct seals.

SS200A - Silicone Strip’N’Stick Sponge Tape

CODE DESCRIPTION

SS200A2 1.6mm x 9.1M

SS200A4 3.2mm x 9.1M

SS200A6 4.8mm x 4.6M

Orange/tan silicone sponge tape with acrylic adhesive on one side. Instant gasket, offering superior service life, excellent conformability and flexibility low compression set with high adhesion to various substrates. Excellent for low and high temperature resistance, gasketing, dampening and thermal insulation etc. Temperature range 200°C+.

SS512AF - Silicone Strip’N’Stick Foam Tape

CODE DESCRIPTION

SS512AF2 1.6mm x 9.1M

SS512AF4 3.2mm x 9.1M

SS512AF6 4.8mm x 4.6M

SS512AF8 6.4mm x 4.6M

SS512AF12 9.5mm x 4.6M

SS512AF16 12.7mm x 4.6M

Grey, modified cell, COHRlastic silicone fire blocking foam with a film supported acrylic adhesive to one side. Superior service life, low compression set, excellent conformability and flexibility, excellent for low and high temperature resistance, gasketing and dampening etc. Foam backing meets UL guide JMST2 file MH12835 gasket material. Temperature range 200°C+.

SPECIALTY TAPES

15

SEALA

NTS &

TAPES

sealants& tapes

APPLICATION GUIDESINGLE/DOUBLE SIDED MOUNTING TAPES

To ensure maximum adhesion of your product you must carry out the following steps.1. Always test all products under actual application conditions prior to commercial use.

2. Material should be stored at 21°C.3. Product must be applied at the application temperature recommended on the product data sheet. This should be a minimum of 20°C. If a temperature-controlled environment is not obtainable in cold weather, we recommend a hair dryer be used to warm the product

and the contact surface.4. For maximum adhesive performance, preparing the contact surface correctly is crucial.

Always prepare the contact surface by removing dirt, wax or moisture with a cleaning solvent. A typical cleaning solvent is a 50/50 isopropyl alcohol/water mixture. For added

adhesion, it may be necessary to seal and/or prime the contact surface with Saint Gobain’s Tite-R-Bond.

5. Peel a fraction of the liner from the tape and stick this to the surface. Continue to apply the tape to the first surface while pulling the liner back at the same time. When all tape is applied

firmly rub down with full pressure to ensure full adhesive to surface contact.6. Although bond strength is dependent on the substrate surface, application temperature

and dwell time, it is recommended that 24 hours dwell time at room temperature be allowed before loading.

DOUBLE SIDED FOAM TAPES5. Apply the tape to the first surface with the liner on, and then firmly rub down. Remove the liner just prior to bonding surfaces together and apply full pressure to ensure full adhesive to

surface contact.6. Although bond strength is dependent on the substrate surface, application temperature

and dwell time, it is recommended that 24 hours dwell time at room temperature be allowed before loading.

FOAM Sealant Pty Ltd distributes NORTON® foam tapes and mounting products.Do not hesitate to call us on (03) 9706 7784 if any assistance is required.

APPLICATION GUIDE

16

Gla

zing

&Fa

bric

atio

n

SEA

LAN

TS &

TA

PES

Green Glue - Noise Proof SealantUsed to seal gaps between drywall and floors as well as spaces around electrical boxes, light fixtures, or any spots in the wall where the drywall ends. Formulated to never dry out or crack, allowing for a lifetime of leak free walls. Can be mudded and painted over a few short hours after application.

CODE DESCRIPTION

GGSC-1 NOISEPROOFING SEALANT 828ML

Green Glue - Noise Proofing CompoundCan be used in walls, ceilings and floors to drastically dampen vibrations which reduces the amount of sound transferring from one side of the structure to the other. Green Glue always remains tacky and will not dry out and become rigid like conventional adhesives.

Green Glue is a viscoelastic damping compound that, when sandwiched between two layers of rigid material greatly reduces the amount of sound transmitted through walls or ceilings and reduces the amount fo noise generated from impacts on floors.

Green Glue has a low VOC (5G/L) that meets 100% of VOC regulations. 100% recycled packaging meaning near zero waste during production. No hazardous materials, does not promote mould and fire tested.

CODE DESCRIPTION

GGC-1 NOISEPROOFING COMPOUND 828ML

Green Glue tested on a 24” OC wood stud wall with fibreglass insulation in the cavities. The soundboard assembly was 2 layers of 5/8” drywall on each side with Green Glue Noiseproofing Compound sandwiched between

Green Glue compared to a drywall adhesive and silicone caulk, not typically used for sound control. Ridgid drywall adhesive can actually worsen the condition of the wall.

NOISE PROOFING

17

SEALA

NTS &

TAPES

sealants& tapes

Norton CST Tape V494

PHYSICAL PROPERTY TYPICAL VALUE TEST METHOD

FLAME SPREAD CLASSIFICATION 15 (CLASS I) ASTM E-84/UL723

SMOKE DEVELOPED CLASSIFICATION

10 (CLASS I) ASTM E-84/UL723

FIRE RATING OF WOODEN FLOOR SYSTEMS

NO NEGATIVE IMPACT ASTM E-119CAN/ULC S101

OXIDATION RESISTANCE PASSED (300 PSI @ 158°F DURING 96h

*APA 5.7.2.2

AIR PERMEABILITY @ 30% COMPRESSION

0 (IMPERMEABLE) *NTP-122

THERMAL CONDUCTIVITY (BTU (.in)/Sq. Ft. (hr) F)

.28 ASTM C-518

RECOMMENDED SERVICE TEMP. -29°C TO 71°C

RECOMMENDED APPLICATION TEMP 4°C TO 52°C

MAX IMPACT NOISE REDUCTION -10dB (STEEL) @ 1250Hz-8dB (WOOD) @ 1250Hz

ASTM E-989ASTM E-492

MAX AIRBORNE SOUND REDUCTION (THROUGH FLOORS)

-14dB (WOOD) @ 700Hz-19dB (STEEL) @ 125Hz

ASTM E-90

MAX AIRBORNE SOUND REDUCTION (THROUGH WALLS)

-16dB (WOOD) @ 500Hz-19dB (STEEL) @ 500Hz

ASTM E-90

* NTP - Norton Test Procedures

* APA - American Plywood Association

applicationSurfaces must be clean of dirt, water and ice. NORTON CST is used in place of sub-floor glue - do not use any additional glue. Structural code requirements: use ‘nail-only’ data when calculating joist spans (contrary to ‘glue-nailed’ floors, no span increase is permitted). Use ring-shanked nails or screws as mechanical fasteners. Do not peel off liner (top surface).

Standard Sizes Thickness: 3.2mmLength: 30.5MWidth: up to 1397mm

CODE

V494

Green Glue - Noise Proof ClipsA great way to isolate structural vibrations. Clips attach to the stud or joist. Hat channel clips to them, providing a place for drywall screws to anchor to. Clips can safely support up to 3 layers of 5/8” drywall.

CODE DESCRIPTION

GGWHISPERCLIP NOISEPROOFING CLIPS

NOISE PROOFING