SECTION – VI-10.0 VENDOR LIST PLANTS: CONSTRUCTION OF...

PROJECTS & DEVELOPMENT INDIA LTD

PNPM/PC150/E/112/SEC-VI-10.0

0

Document No Re

Sheet 1 Of 35

FORM NO: 02-0000-0021F1 REV2 All rights reserved

SECTION – VI-10.0

VENDOR LIST

PLANTS: CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR, PUMP HOUSE AND SERVICES

PROJECT: INTEGRATED COAL BASED FERTILISER COMPLEX AT TALCHER, ANGUL DISTRICT, ODISHA (INDIA)

CONSTRUCTION OF RAW WATER & FIRE WATER RESERVOIR,

PUMP HOUSE AND SERVICES

TALCHER FERTILIZERS LIMITED

VENDOR LIST

PNPM/PC150/E/112/SEC-10.0

0

DOCUMENT NO REV

SHEET 2 OF 35

FORM NO: 02-0000-0021 F2 REV2 All rights reserved

1.0 CIVIL

GENERAL NOTES:

i. Only ‘First’ Quality materials shall be used

ii. OWNER / CONSULTANT reserve the right to choose any of the approved make / vendor as per this list. Make of the item not indicated and any other make for the specified item shall be subject to owner’s / consultant’s approval.

iii. Specifications of manufacturer’s items shall be checked against tender item / specifications

before selecting any product or brand name. In case of any discrepancy, tender item / specifications shall prevail, and any such brand of item shall not be used which is not conforming to tender specifications even if it is listed in this vendor list.

iv. In case of non-availability of any material among approved vendors / makes in a particular site / region, alternate vendor / make conforming to IS / BS etc. Shall be used subject to approval by OWNER / CONSULTANT.

SL. NO. ITEM NAME

1.0 FLOOR FINISHING

1.1 CEMENT TILES (FLOOR/WALL)

a) EUROCON b) ALTRA TILE PVT. LTD. c) DAZZLE

1.2 TERRAZZO TILES A) NITCO B) HINDUSTAN TILES

1.3 CERAMIC TILES

a. SOMANY CERAMICS b. H&R JOHNSON CERAMICS c. KAJARIA CERAMICS d. ORIENT CERAMICS

1.4 HEAVY DUTY FLOOR TILES

A) BHARAT TILES B) RESTILE CERAMICS C) PELICAN CERAMIC INDUS. D) PAVIT E) SONA TILES

1.5 INDUSTRIAL FLOOR HARDENER ADMIXTURE

a) PIDILITE INDUSTRIES b) SIKA c) CICO.

1.6 PVC ROLLS

A) PREMIER VINYL B) ARMSRONG INARCO C) RMG POLYVINYL

1.7 PVC TILES A) ARMSTRONG




VENDOR LIST


0

DOCUMENT NO REV

SHEET 3 OF 35


1.8 PVC TILES/ROLL ANTISTATIC

A) PREMIER VINYL B) RMG POLYVINYL C) ARMSTRONG

1.9 ACID RESISTANT TILES(BATTERY ROOM)

A) H&R JOHNSON OR APVD. EQUIV.

1.10 MOSSAIC TILE

A) ITALIS B) SPECIFIC GLASS MUSSAIC INDIA LTD.

2.0 WOODWORK

2.1 FLUSH DOOR A) GREEN B) CENTURY DOORS C) KITPLY PRODUCTS

2.2 PLY WOOD/BLOCK BOARD A) CENTURY B) KITPLY PRODUCTS C) GREEN PLY

2.3 PARTICLE BOARD (EXTRA GRADE)

A) BHUTAN BOARD B) NOVAPAN INDIA LTD.

2.4 MDF BOARD/MD PARTICLE BOARD (EXTRA GRADE)

A) NUCHEM LTD. B) MANGALAM TIMBER PRODUCTS LTD. C) WESTERN BIO SYSTEMS LTD.

2.5 DECORATIVE LAMINATES

A) CENTURY B) GREENPLY INDUS. LTD. C) MERINO D) ARCHID

2.6 MARINE PLYWOOD

A) CENTURY B) GREENPLY INDUS. LTD. C) MERINO D) ARCHID

2.7.0 DOORS & WINDOWS FITTINGS

2.7.1 MORTICE LOCKS WITH HANDLES

A) GODREJ & BOYCE B) EVERITE AGENCIES (P) LTD. C) DOORSET

2.7.2 CYLINDRICAL PIN TUMBLER LOCK WITH KNOBS

A) GODREJ & BOYCE B) EVERITE AGENCIES (P) LTD. C) DOORSET

2.7.3 HYDRAULIC DOOR CLOSER (OVER HEAD/ FLOOR)

A) OZONE B) EVERRITE AGENCIES (P) LTD. C) HARDWYN

2.7.4 MISC. DOOR FITTINGS HINGLE, TOWER BOLTS, LATCHES,

A) EVERITE AGENCIES (P) LTD. B) EBCO DINSUTRIES




VENDOR LIST


0

DOCUMENT NO REV

SHEET 4 OF 35


SOPPER, STAYS, ALDROPS ETC. D) OZONE E) HARDWYN

2.7.5 THREE WAY BOLTING LOCKING DEVICE HANDLE

A) SRIMA SALES & SERVICES B) DHIMAN INDUSTRIES

2.7.6 PANIC BAR LATCH (FOR EMERGENCY DOOR)

A) SRIMA SALES & SERVICE

2.7.7 UPVC WINDOWS A) FENESTA B) ENCRAFT C) WINDOW MAGIC

2.7.8 FASTENERS A) HILTI INDIA PVT. LTD. B) FISCHER

3.0 STEEL / ALUMINIUM DOORS, WINDOWS & VENTILATOR

3.1 PRESSED STEEL DOORS WINDOWS & SECTION DOORS WINDOWS/ROLLING SHUTTER

A) RAYMUS ENGINEERS B) DHIMAN STEEL C) RDG ENGINEERING D) SUPER STEEL WINDOW CO. E) SKS STEEL INDUS.

3.2 ALMUNIUM / DOORS/ WINDOWS SECTIONS

A) JINDAL ALUMINIUM LTD. B) HINDALCO INDUSTRIES C) INDAL

3.3 FIRE-PROOF DOORS(APPROVED)

A) NAVAIR INTERNATIONAL B) RDG ENGINEERING

3.4 PVC DOORS / WINDOWS A) SINTEX OR APPVD EQUIV. 3.5 PVC WATER TANKS A) SINTEX OR APPVD EQUIV. 4.0 PLASTERING

4.1 WATERPROOFING/ COMPOUND IN CEMENT PLASTER

A) STRUCTURAL WATER PROOFING CO. (P) LTD. B) PIDILITE INDUSTRIES C) SIKA

5.0 ROOF TREATMENT (WATER PROOFING)

5.1 BRICK BAT COBA A) INDIA WATER PROOFING CO. B) OVERSEAS WATERPROOFING CORPN.

5.2

CRYLIC BASED CEMENTATIOUS PRIMER COATING FOR ROOF WATERPROOFING

A) STRUCTURAL WATER PROOFING CO. (P) LTD. B) SIKA QUALCRETE LTD. C) PIDILITE INDUSTRIES

5.3 APP MODIFIED POLYMERIC WASTER PROOFING MEMBRANE

A) PIDILITE INDUSTRIES LTD. B) SIKA

6.0 PAINTING WORKS

6.1 PLASTIC EMULSION (INTERIOR/EXTERIOR)

A) ICI INDIA LTD. B) BERGER PAINTS LTD.




VENDOR LIST


0

DOCUMENT NO REV

SHEET 5 OF 35


C) ASIAN PAINTS LTD. D) SHALIMAR PAINTS E) KANSAI NEROLAC PAINTS LTD.

6.2 DRY OILBOUND DISTEMBER A) ASIAN PAINTS LTD. B) KANSAI NEROLAC PAINTS LTD.

6.3 INDUSTRIAL / EXPOXY/ SYNTHETIC ENAMEL PAINTS

A) ICI/AKZO NOBEL INDIA B) BERGER PAINTS LTD. C) ASIAN PAINTS LTD. D) SHALIMAR PAINTS E) INTERNATIONAL MARINE COATINGS PVT. LTD. F) KANSAI NEROLAC PAINTS LTD. G) BOMBAY PAINT

6.4 WATERPROOFING CEMENT PAINT

A) KILLICK NIXON LTD. B) RAJDOOT PAINTS

6.5 WOOD MELAMINE POLISH A) ASIAN PAINTS B) SHALIMAR PAINTS C) WEMBLY PAINTS

6.6

WASTERPROOFING TRANSPARENT EXTERIOR WALL COATING (OVER PAINTED SURFACE)

A) PIDILITE INDUSTRIES B) SIKA

6.7 FIRE PROOF COATING A) NAVAIR INTERNATIONAL OR APPVD. EQUIV.

7.0 ROOFING SHEETS & ACCESSORIES

7.1 ASBESTOS SHEETS A) ETERNIT EVEREST LTD. B) CHARMINAR INDUSTRIES C) VISAKA

7.2 C.G.I. SHEETS

A) ISPAT INDUSTRIES LTD. B) STEEL AUTHORITY OF INDIA C) TATA STEEL D) JINDAL

7.3 PRECOATED G.I. PROFILE SHEETS FOR ROOFING & WALL CLADDING

A) ISPAT INDUSTRIES LTD. B) LLOYD INSULATION (I) LTD. C) STEEL AUTHORITY OF INDIA D) TATA STEEL E ) JINDAL

7.4 ALUMINIUM SHEET (PLAIN/PROFILE)

A) INDIAN ALUMINIUM CO. LTD. OR APPROVED EQUIVALENT

7.5 FIBRE GLASS SHEETS & A) SIMBA FRP (P) LTD.




VENDOR LIST


0

DOCUMENT NO REV

SHEET 6 OF 35


PANELS (MACHINE MOULD)ED

B) GE INDIA C) DUROPLAST

7.6 PROOFING J/L HOOKS, BOLTS & OTHER ACCESSORIES (POLYMER COATED)

A) KATALIST CONSULTANT (P) LTD. B) ADVANCED MACHINE

8.0 SANITARY PLUMBING FITTINGS & FIXTURES

8.1 SANITARY FITTINGS (W.C. WASH BASIN, URINAL ETC.)

A) HINDUSTAN SANITARY WARE & INDUS. LTD. B) PARRYWARE SANITARY WARE C) MADHUSUDAN CERAMICS D) NYCER CERAMICS

8.2 PLUMBING FITTINGS & FIXTURES

A) JAGUAR B) CERA C) HINDWARE

8.3 GLASS/MIRROR (SHEET/ FLOAT/ TOUGHENED/ LAMINATION

A) GUJARAT GUARDIAN LTD. B) SAINT GOBAIN C) ASAHI FLOAT

8.4 GI PIPES

A) JINDAL B) SURYA C) PRAKASH D) SWASTIK

9.0 FALSE CEILING, FALSE FLOORING & UNDERDECK INSULATION

9.1 FLASE CEILING / WALL CLADDING (ALUMINIUM STRIP/ TRAY TYPE)

A) INTERARCH BUILDING PRODUCTS(P) LTD. B) HUNTER DOUGLAS C) MASCOT OVERSEAS

9.2 FALSE FLOORING

A) MULTI INTERIORS PVT. LTD. B) BESTLOCK SYSTEM & CONCEPTS C) LLOYD INDUSULATION (I) LTD. D) UNITED INSULATION E) A.R. & BROTHERS

9.3 UNDERDECK/WALL HEAT INSULATION

A) BAKELITE HYLAM LTD. B) U.P. TWIGA F.G. LTD. C) LLOYD INDULATION (I) LTD. D) SUPEREME

9.4 OVERDECK HEAT INSULATION

A) LLOYD INSULATION (I) LTD. B) BEST PLASTRONICS LTD.

9.5

GYPSUM BOARD TILES (FIBRE GLASS REINFORCED)/ PRIMA BOARD ARMSTRONG FALSE CEILING

A) SAINT GOBAIN




VENDOR LIST


0

DOCUMENT NO REV

SHEET 7 OF 35


10.0

SPECIALITY PRODUCTS (CEMENT ADDITIVES/ ADMIXTURES/CORROSION INHIBITORS/ SURFACE TREATMENT/ GROUT & ANCHORS/SEALING/ COASTING

A) PIDILITE INDUSTRIES B) SIKA

10.1 EPOXY FLOOR COATING (BATTERY ROOM)

A) SIKA B) FAIRMATE

11.0 MISCALLANEOUS ITEMS

11.1 WOOD PRESERVATIVE A) ASCU HICKSON LTD.

11.2 WALL SURFACE TEXTURED COATING

A) JOTUN B) SPECTRUM PAINTS C) BAKELITE HYLAM D) OIKOS

11.3 PVC PLUMBING FITTINGS

a) SUPREME b) POLYPAC c) ASTROL

11.4 REINFORCED FIBRE GLASS WATERPROOFING FELT

A) SIKA B) U.P. TWIGA F.G. LTD.

11.5 ANTI TERMITE TREATMENT

A) PCI OR APPRVD EQUIV.

11.6 MATERIAL TEST HOUSE A) IIT MADRAS B) GOVT APPROVED AGENCY

12.0 CEMENT

A) ACC B) J K CEMENT C) BINANI CEMENT D) JP CEMENT E) GUJARAT AMBUJA F) ALTRA TECH CEMENT G) BIRLA CORPN. LTD. H) GRASIM I) SHREE

12.1 SULPHUR RESISTANT CEMENT A) SAURASHTRA CEMENT LTD. B) SHREE DIGVIJAY CEMENT

13.0 RCC DESIGN MIX AP GOVT APPROVED AGENCY

14.0 WRAPPING COATING (I/C TAPE & PRIMER) IWL OR APPROVED EQUIPMENT

A) IWL OR APPROVED EQUIVALENT

15.O FIRE PROOFING MATERIAL A) CAFCO B) CARBOLINE

16.0 STRUCTURAL STEEL / CS PLATE HEAVY SECTIONS MORE THAN 150 MM A) SAIL




VENDOR LIST


0

DOCUMENT NO REV

SHEET 8 OF 35


B) TATA STEEL C) RINL LIGHT SECTIONS LESS THAN 150 MM D) JINDAL E) ESSAR F) ISPAT INDUSTRIES

16.1 MS PIPES (HAND RAIL APPLICATION)

a) SURYA b) PRAKASH c) JINDAL

17.0 TIMT BAR / REBAR A) SAIL B) TATA STEEL C) RINL

18.0 GRATINGS/HANDRAILS

A) INDIANA GRATINGS B) WESTCOAST ENGINEERING C) GREATWELD GRATING D) KANADE ANAND UDYOG

19.0 WELDING ELECTRODE

A) ADOR B) ESAB C) D & H D) HANOVAR

2.0 ROTATING EQUIPMENT :

SL.NO VENDOR’S NAME

COUNTRY

PUMPS FOR WATER SERVICE (VERTICAL)

1. FLOWMORE PVT. LTD INDIA

2. JYOTI LIMITED INDIA

3. KIRLOSKAR BROTHERS LTD. INDIA

4. MATHER & PLATT (INDIA) LTD. INDIA

5. KSB PUMPS LIMITED INDIA

6. AKAY INDUSTRIES PVT LTD INDIA

7. KISHORE PUMPS PVT LTD INDIA

8. SAM TURBO INDUSTRIES PVT LTD INDIA

EOT CRANES

1. W.H. BRADY & CO. LTD INDIA

2. AVON CRANES PVT. LTD. INDIA




VENDOR LIST


0

DOCUMENT NO REV

SHEET 9 OF 35


3.0 MECHANICAL – PIPING

3. THE ACME MANUFACTURING CO. LTD INDIA

4. WMI CRANES INDIA

5. SAMCO ENGINEERING PVT. LTD INDIA

CS WELDED PIPES TO API 5L SPIRAL LONG. WELDED SL.NO VENDOR’S NAME COUNTRY

1 HEAVY METAL PIPE CENTRE (UPTO 24" (UPTO SCHXXS) INDIA

2 JINDAL PIPES LTD. (2” TO 14”) INDIA

3 JOTINDRA STEEL & TUBES LTD. (½" TO 14") INDIA

4 KALPESH TUBE(INDIA), (TRADER) INDIA

5 LALIT PIPES & PIPES LTD.. (16" to 64" thickness upto 20mm) INDIA

6 MUKAT PIPES LTD. INDIA

7 P.K.FORGE & FITTING INDUSTRIES INDIA

8 PRATIBHA INDUSTRIES LTD. (16" to 24" thickness 6mm to 14.27mm)

INDIA

9 RATNAMANI METALS & TUBES LTD. INDIA

10 SAGAR STEEL CORPORATION (TRADER) INDIA

11 SAIL INDIA

12 SURINDRA ENGINEERING CO. PVT. LTD. INDIA

13 SURYA ROSHINI LTD (GR. A 3” TO 4”, GR. B, 6” TO 14”) INDIA

14 THE BENGAL MILL STORES SUPPLY CO.(TRADER) INDIA

15 WELSPUN GUJARAT STAHL ROHREN LIMITED (FOR ANJAR AND DAHEJ PLANTS) (UPTO 72” 50 MM THK FOR DAHEJ PLANT AND UPTO 100” 30 MM THK. FOR ANJAR PLANT.)

INDIA

16 PHOCEENNE FRANCE

17 ETS TROUVAY & CAUVIN FRANCE

18 MANNESMANN HANDEL AG GERMANY

19 THYSSEN-KRUPP STAHLUNION GMBH GERMANY

20 DALMINE SPA ITALY

21 RACCORTUBI SRL ITALY

22 KOSEI SANGYO LTD JAPAN

23 MARUBENI ITOCHU STEEL JAPAN

24 MITSUBISHI CORPORATION JAPAN

25 NIPPON KOKAN JAPAN

26 NIPPON STEEL CORPORATION JAPAN




VENDOR LIST


0

DOCUMENT NO REV

SHEET 10 OF 35


27 NISHITANI & CO. LTD. JAPAN

28 NISSHO IWAI CORPORATION JAPAN

29 OKURA & CO. LTD. JAPAN

30 SOJITZ CORPORATION JAPAN

31 SUMITOMO METAL INDUSTRIES LTD. JAPAN

32 HYUNDAI CORPORATION KOREA

33 BRITISH STEEL CORPORATION U.K.

34 CORUS TUBES LIMITED U.K.

35 SAW PIPES USA, INC U.S.A

CS/AS LTCS SEAMLESS PIPES

1 BHEL INDIA

2 CHETAN STEELS (Upto 12”, SCH80) INDIA

3 HEAVY METAL & TUBES (Upto 8”, thickness upto 18.26mm) INDIA

4 HEAVY METAL PIPE CENTRE (UPTO 24" (UPTO SCHXXS) INDIA

5 INDIAN TUBE CO. (TATA DEV. OF TUBES & PIPES) INDIA

6 ISMT LIMITED INDIA

7 JAY LAKSHMI STEEL & ENGG. CO. INDIA

8 JINDAL SAW LTD. INDIA

9 MAHARASHTRA SEAMLESS LTD. INDIA


11 RATNADEEP METAL & TUBES PVT. LTD. INDIA

12 SAINEST TUBES PVT. LTD. ( ½ “ NB TO 3” UPTO SCH. 160 (ASTM A 106 GR. B, A333 GR. 1 & 6 & A335 GR. P11))

INDIA

13 PHOCEENNE FRANCE



16 HORST KURVERS GMBH GERMANY


18 GAM RACCORDI S.P.A ITALY

19 IBF SEAMLESS PIPES SPA ITALY










VENDOR LIST


0

DOCUMENT NO REV

SHEET 11 OF 35






30 AB SANDVIK STEEL SWEDEN

31 VOMAL INTERNATIONAL LIMITED U.K.



SS SEAMLESS/ WELDED PIPES

1 APEX TUBES INDIA

2 BHANDARI FOILS & TUBES LIMITED (SEAMLESS UPTO 4" (SCH. 80) & WELDED UPTO 20" (THK. <= 8

INDIA

3 CHOKSI TUBE COMPANY LTD. INDIA

4 CHETAN STEELS ( UPTO 6” SCH. 40 ) INDIA

5 HEAVY METAL & TUBES (UPTO 8" (THICKNESS UPTO 18.26 MM)) INDIA

6 HEAVY METAL PIPE CENTRE (UPTO 8" ( UPTO SCH80S) (PDIL APPROVED MANUFACTURER'S MAKE ONLY))

INDIA

7 JAY LAKSHMI STEEL & ENGG. CO. INDIA

8 JINDAL SAW LTD. INDIA

9 KRYSTAL STEEL MANUFACTURING PVT. LTD. (UPTO 2" (MATERIAL UPTO GRADE SS 321))

INDIA

10 MARDALE PIPES PLUS LTD. INDIA

11 MODERN TUBE INDUSTRIES LTD. (Upto 2" (upto SS Grade 321)) INDIA

12 NUCLEAR FUEL COMPLEX INDIA


14 PRAKASH STEELAGE LTD. (Seamless: upto 12” & Welded: upto 24”) INDIA

15 QUALITY STAINLESS PVT. LTD. INDIA

16 RAJENDRA MECHANICAL INDUSTRIES LTD. INDIA


18 RATNADEEP METAL & TUBES PVT. LTD. ( SMLS. 6” , WELDED 2” ) INDIA

19 SANDVIK ASIA PVT. LTD. (¾" TO 2" (THK: UPTO 8.74 MM)) INDIA

20 SANGHVI METALS (TRADER) INDIA

21 SCORODITE STAINLESS (INDIA) PVT. LTD. (UPTO 2" (UPTO SS GRADE 321))

INDIA

22 SUBHLAXMI METALS & TUBES PVT. LTD. (Seamless: upto 2” & Welded: upto 8”)

INDIA

23 SURAJ STAINLESS LIMITED INDIA




VENDOR LIST


0

DOCUMENT NO REV

SHEET 12 OF 35



25 ZHEJIANG JIULI STAINLESS STEEL PIPE CO. LTD. CHINA


27 PHOCEENNE FRANCE

28 H. BUTTING GMBH & CO. (SEAMLESS : UPTO 30" (UPTO 16MM THK) & WELDED: UPTO 72" (UPTO 64MM )

GERMANY



31 THYSSEN-KRUPP STAHLUNION GMBH GERMANY













44 AB SANDVIK STEEL SWEDEN

45 T.T.I. – TUBACEX TUBOS INOXIDABLES, S.A. SPAIN

46 SOSTA BV (UPTO 72" ( THICKNESS UPTO 25.4 MM)) NETHERLAND





SS SEAMLESS TUBES

1 ANIL METAL CORPORATION INDIA

2 APEX TUBES PVT. LIMITED (UPTO 50.8 MM OD (THICKNESS UPTO 4.00 MM))

INDIA

3 BHANDARI FOILS & TUBES LIMITED (UPTO 50MM OD) INDIA

4 HEAVY METAL & TUBES (UPTO 8" (THICKNESS UPTO 18.26 MM)) INDIA

5 KRYSTAL STEEL MANUFACTURING PVT. LTD. (UPTO 50.8 MM OD (MATERIAL UPTO GRADE SS 321))

INDIA

6 MODERN TUBE INDUSTRIES LIMITED (UPTO 50.80 MM OD (UPTO SS INDIA




VENDOR LIST


0

DOCUMENT NO REV

SHEET 13 OF 35


GRADE 321))

7 PRAKASH STEELAGE LTD. (Seamless: upto114 mm OD, Thickness upto 6 mm)

INDIA


9 SANDVIK ASIA PVT. LTD. (OD UPTO 60.33 (THK: UPTO 8.74 MM)) INDIA

10 SCORODITE STAINLESS (INDIA) PVT.LTD. (UPTO 50.80 OD (UPTO SS GRADE 321))

INDIA

11 SURAJ STAINLESS LIMITED INDIA

12 T.T.I.-TUBACEX TUBOS INOXIDABLES, S.A.(OD 15.8 MM TO 250.0 MM, WALL THK.1.0 MM)

SPAIN

FITTINGS: CS/AS/SS SEAMLESS & FORGED

1 AMFORGE INDUSTRIES INDIA

2 ANIL METAL CORPORATION INDIA

3 CHETAN STEELS ( UPTO 6” SCH. 80 ) INDIA

4 COMMERCIAL SUPPLYING AGENCY INDIA

5 CSA FITTINGS (Forged ½” to 2”-upto 900#, Seamless: 2” to 8”- upto SCHXXS)

INDIA

6 EBY FASTENERS INDIA

7 EBY INDUSTRIES INDIA

8 FIT-TECH INDUSTRIES (Forged ½” to 1 1/2”-upto 900#, Seamless: 2” to 8”- upto SCHXXS)

INDIA

9 FLASH FORGE(P) LTD.(Forged upto 4”-upto 900#, Seamless/welded: up to 42”)

INDIA

10 GUJARAT INFRAPIPES PVT. LTD. INDIA

11 JAY LAKSHMI STEEL & ENGINEERING CO. INDIA

12 KALPESH TUBE(INDIA),(TRADER) (UPTO A MAX ORDER VALUE RS.25.0 LAKH)

INDIA

13 M.S FITTINGS MANUFACTURING CO. PVT LTD. INDIA

14 MARDALE PIPES PLUS LTD. INDIA

15 NAVKAR FORGINGS & FITTINGS PVT. LTD INDIA

16 NL HAZRA (upto SCH80) INDIA

17 P.K TUBES & FITTINGS PVT. LTD. INDIA

18 P.K FORGE & FITTING INDUSTRIES INDIA

19 PARAS FITTINGS PVT. LTD. (Forged: CS ½” to 2” & CS Seamless: 2” to 8”- upto SCHXXS)

INDIA

20 PARMAR TECHNO FORGE (Elbow, Tee, Reducer- ½” to 12” & Cap upto 18”)

INDIA

21 PERFECT MARKETTING PVT. LTD. INDIA




VENDOR LIST


0

DOCUMENT NO REV

SHEET 14 OF 35


22 PETROCHEM INDUSTRIES (Seamless: Upto 16" (All Fittings) & upto 36" (caps) SCH : XXS /80S, Forged: upto 3”-6000#)

INDIA

23 RAJENDRA FORGE INDUSTRIES (CS: UPTO 12" SCH 40 & SS: 6" SCH 40S)

INDIA

24 S & G ENGINEERS (P) LTD. INDIA

25 SAGAR STEEL CORPORATION (TRADER) INDIA


27 SAWAN ENGINEERS INDIA

28 SHIVANANDA PIPE FITTINGS LTD., INDIA

29 STEWARTS AND LLOYDS OF INDIA LIMITED INDIA

30 TEEKAY TUBES PRIVATE LIMITED INDIA


32 TOPAZ PIPING INDUSTRIES INDIA

33 TUBE BEND (CALCUTTA) PVT. LTD. (CS FITTINGS ONLY) INDIA

34 TUBE PRODUCTS INCORPORATE INDIA

35 ZOLOTO INDUSTRIES (upto 6” (only CS Galv.)) INDIA

36 PHOCEENNE FRANCE


38 VALLOUREC FRANCE

39 SEIKMANN ANLAGEN-TECHNIK GMBH. GERMANY

40 TPS-TECHNITUBE ROHRENWERKE GMBH GERMANY



43 PETROL RACCORD S.P.A. (Seamless: 1” to 42” (Elbow) & 1” to 56” Tee/Reducer/Cap))

ITALY




47 IND MECCANICA BASSI LUIGI & C. SPA ITALY

48 MANTOVANI SPA ITALY


58 TECHNO FORGE SPA ITALY


52 NIPPON KOKAN JAPAN







VENDOR LIST


0

DOCUMENT NO REV

SHEET 15 OF 35




58 HAITIMA CORPORATION TAIWAN



61 EUROTUBE LIMITED U.K.


63 BONNEY FORGE U.S.A.

FORGED FLANGES

1 AJAY FORGING PVT. LTD INDIA

2 AMFORGE INDUSTRIES INDIA

3 ANANDMAYEE FORGINGS PVT. LTD. INDIA

4 C D ENGINEERING INDIA

5 CHAUDHARY HAMMER WORKS (P) LTD. INDIA

6 CHETAN STEELS (UPTO 6”, 150#) INDIA

7 `ECHJAY INDUSTRIES LTD INDIA

8 FERROUS ALLOYS FORGING PVT. LTD INDIA

9 GOOD LUCK ENGINEERING CO. (½"-12" (UPTO 2500#), 14"-16" (UPTO 900#), 18"-32" (UPTO 600#), 34"-48" (UPTO 300#),

INDIA

10 J.K FORGINGS INDIA

11 KUNJ FORGINGS PVT. LTD.(MATERIAL CS/SS/AS) (upto 60” (upto 300#) & upto 12” (upto 2500#))

INDIA

12 MAHESH INDUSTRIES (Upto 8” -150#, material ASTM A105 only) INDIA

13 P.K TUBES & FITTINGS PVT. LTD. (Upto 24”(upto1500#) & Upto 12”(upto2500#) Spectacle Blind and Spacer & Blinds only)

INDIA

14 PARAMOUNT FORGE (CS,AS & SS : ½” TO 42” (UPTO 600#), ½” TO 24” (UPTO 900#, ½ “ TO 16” ( UPTO 1500#), ½” TO 12” (UPTO 2500#)).

INDIA

15 PERFECT MARKETING (P) LTD. INDIA

16 PUNJAB STEEL INDIA

17 R D FORGE (A UNIT OF R D CHEMICALS PVT LTD) (Upto 54” (150#), 42” (upto 600#), 20” (upto 1500#) & 12” (2500#))

INDIA

18 RAJENDRA FORGE INDUSTRIES (CS & SS : UPTO 12", 300#) INDIA

19 S & G ENGINEERS (P) LTD. INDIA

20 SANGHVI FORGINGS & ENGINEERING LTD INDIA


22 SAWAN ENGINEERS INDIA

23 TECHNO FORGE LTD. (UPTO 42" (UPTO 300#), UPTO 24" (600#), UPTO 20" (900#), UPTO 16" (1500#),

INDIA




VENDOR LIST


0

DOCUMENT NO REV

SHEET 16 OF 35


24 TUBE BEND (CALCUTTA) PVT LTD INDIA

25 PHOCEENNE FRANCE



28 I.S. INTERNATIONAL ITALY

29 MANTOVANI SPA ITALY

30 OFFICINE NICOLA GALPERTI & FIGLIO S.P.A ITALY


32 NICHINAN SANGYO CO. LTD., JAPAN




GATE/ GLOBE/ CHECK VALVES CS/SS/AS < 900 LBS

1 AV VALVES LTD. (CAST UPTO 42” ,150#) 28” 300#, 24” (600#) & FORGE UPTO 2” (800#)

INDIA

2 ADVANCE VALVES (2”-80” (Upto 600#) Dual Plate Check Valves only)

INDIA

3 ASSOCIATED TOOLINGS (I) PVT. LTD. INDIA

4 AUDCO INDIA LIMITED (L&T VALVES DIVN.) INDIA

5 AUTOCAP INDUSTRIES (1/2” to 2” 800# (only CS & SS) INDIA

6 BELL- O-SEAL VALVES LTD.( FOR ZERO LEAKAGE , HAZARDOUS FLUIDS.)

INDIA

7 BHEL ( VALVES DIVISION) INDIA

8 BRIGHTECH VALVES AND CONTROLS PVT. LTD. (Upto 8” x 300#) INDIA

9 CHEMTECH INDUSTRIAL VALVES PVT. LTD. INDIA

10 CRAWLEY & RAY (FOUNDERS & ENGINEERS) PVT. LTD. (<=300#, (only CS))

INDIA

11 DATRE CORPORATION LTD. (Upto 300#, 2” to 8” (Gate), 2” to 6” (Globe & Check Valves))

INDIA

12 DEWRANCE MACNEILL & CO. LTD. INDIA

13 ECONO VALVES PVT. LTD. INDIA

14 EXPERT ENGINEERING ENTERPRISES INDIA

15 FLOCON SYSTEMS PVT. LTD. (CS upto 6” – 1500#) INDIA

16 FLOVEL VALVES PVT. LTD.( SINGLE DISC , DULA PLATE & NOZZLE CHECK VALVES ONLY : UPTO 48” (150#) & 24 (UPTO 600#)

INDIA

17 FLUIDTECH EQUIPMENT PVT. LTD. ( CAST # CS & SS 2” TO 12” INDIA




VENDOR LIST


0

DOCUMENT NO REV

SHEET 17 OF 35


150# & 2 “ TO 8” 300 # AND FORGED (CS AND SS ) ½” TO 2” (800#)

18 FORWARD ALLOYS & CASTINGS ( UPTO 14”) INDIA

19 GURU INDUSTRIAL VALVES PVT. LTD. (Cast CS only: upto 24”(150#), 20”(300#), 10” (600#) & Forged : upto 2” (800#)

INDIA

20

HAWA ENGINEERS LTD. (Gate Valves: upto 40”(150#), upto 26” (300#), upto 24” (600#), upto 2” (800#); Globe Valves: upto 20”(150#), upto 16” (300#), upto 12” (600#), upto 2” (800#), Check Valves: upto 36”(150#), upto 24” (300#), upto 16” (600#), upto 2” (800#) (Dual Plate: 36” (150#)

INDIA

21 HAWA VALVES INDIA PVT. LTD. (CS upto 6”, 150#) INDIA

22 HI-TECH VALVES PVT. LTD. (CS,<=800 #, SIZE ½-2, <=300# FOR SIZE 2-6”)

INDIA

23 INTERVALVE INDIA LTD. (CAST UPTO 24” (UPTO 300#) & UPTO 12” 600# , FORGED UPTO 2” (800#))

INDIA

24 JC VALVES & CONTROLS INDIA PVT. LTD. (CAST UPTO 48” (150#) & 24” (UPTO 600#) & FORGED UPTO 2” (800#))

INDIA

25 KIRLOSKAR BROTHERS LTD.( CS UPTO 12” , 300#) INDIA

26 KSB PUMPS LIMITED (VALVES DIVN) INDIA

27 LARSEN & TOUBRO LIMITED (1/2" TO 24") INDIA

28 LEADER VALVES LTD. (Casting<=20”-600#, 300-150#, Forging<=2”-800#)

INDIA

29 M.H. VALVES PVT. LTD. (1/2” to 1 1/2”-800#, 2” to 6”-600#) INDIA

30 MICON ENGINEERS (HUBLI) [PVT. LTD.(Cast: Upto 12” (150# & 300#), 6” (600#) & Forged: upto 2” (800#))

INDIA

31 MICROFINISH VALVES LTD. INDIA

32 NSSL LTD. (UPTO 80” (150#), 56” UPTO 600# & FORGED UPTO 2” (800 #))

INDIA

33 NITON VALVES INDUSTRIES PVT. LTD. INDIA

34 OSWAL IND. LTD. (UPTO 48” (150#), 32” (300#) & 24” (600#) INDIA

35 S & M INDUSTRIAL VALVES LTD. (CS Gate & Globe Valves 2” – 24” <=300#)

INDIA

36 SHALIMAR VALVES PVT. LTD. (Cast Upto 24” (Upto 600#), Forged: ½” to 1 ½” (800#))

INDIA

37 SHREERAJ INDUSTRIES (CS upto 150#) INDIA

38 STEEL STRONGVALVES (I) PVT. LTD. (Upto 42”) INDIA

39 VENUS PUMP & ENGINEERING WORKS. INDIA

40 VIBA FLUID CONTROL INDIA

41 WEIR BDK VALVES (A UNIT OF WEIR INDIA PVT. LTD.) (Cast UPTO 36" (150#); 24" (300#); 12" (600#) & Forged: Upto 2” (800#))

INDIA

42 ZED VALVES CO. PVT. LTD. (Upto 14” (600#)) INDIA




VENDOR LIST


0

DOCUMENT NO REV

SHEET 18 OF 35


43 ZOLOTO INDUSTRIES. ( 40 MM TO 200 MM(ONLY CS & SS)) INDIA

44 VELAN INC. ( UPTO 48” , 600#) CANADA

45 BOTELI VALVE GROUP CO. LTD.(Cast Upto 56” (150#), 36” (300#), 24” (600#) & Forged: Upto2” (800#))

CHINA

46 ZHEJIANG JIEHUA VALVE CO. LTD. CHINA

47 PEMTO VALVE GERMANY

48 CESARE BONETTI SPA (Cast Upto 42” (Upto 300#), 24” (600#) Forged: ½” to 1 ½” (800#))

ITALY

49 FASANI S.P.A. ITALY

50 FRIULCO SPA (UPTO 48" (150#), 32" (Upto 600#) ITALY

51 GTC ITALIA, S.R.L. ITALY

52 MANTOVANI SpA ITALY

53 OMB S.P.A. ITALY

54 PETROL VALVES S.R.L. ITALY

55 MATSURA H. P MACHINE WORKS CO.LTD. JAPAN



58 REDPOINT ALLOYS BV NETHERLAND

59 WALTHAN & WEIR SPAIN

60 POYAM VALVES (AMPO S.CCP.) (Size upto 60” (Rating upto 800#) SPAIN

61 BABCOCK BORSIG ESPANA , S.A SPAIN

62 SUFA LIMITED U.A.E.

63 BEL VALVES U.K.

GATE/ GLOBE/ CHECK VALVES CS/SS/AS > =900 LBS

1 A V VALVES LIMITED (Cast Upto 24” (900# & 1500#), 8” (2500#) Forged: Upto 2” (2500#))

INDIA

2 ADVANCE VALVES (2”-36” (900#) 2”-24” (1500#), 2”-12(2500#) Forged: Upto 2” (2500#)) FOR DUAL PLATE CHECK VALVES)

INDIA

3 ASSOCIATED TOOLINGS (I) PVT. LTD. (½” TO 2” (900# & 1500#)) INDIA


5 BHEL (VALVES DIVISION) INDIA

6 FLOVEL VALVES PVT. LTD. (Dual Plate Check Valves: Upto 24” (900#)

INDIA

HAWA ENGINEERS LTD. (Gate Valves: upto 20”(900#), upto 10” (1500# & 2500#); Globe Valves: upto 8”( 900# & 1500#), upto 1” (2500#); Check Valves: upto 10”(900#), upto 6” (1500#), upto 1” (2500#)

INDIA

7 HAWA VALVES INDIA PVT. LTD. (Forged upto 2”, 1500#) INDIA




VENDOR LIST


0

DOCUMENT NO REV

SHEET 19 OF 35


8 INTERVALVES INDIA LTD.(Forged: Upto 2” (1500#)) INDIA

9 JC VALVES & CONTROLS INDIA PVT. LTD. (CAST UPTO 12” (1500#),10” (2500#) & FORGED UPTO 2” (2500#))

INDIA

10 KSB PUMPS LIMITED (VALVES DIVN) INDIA

11 LARSEN & TOUBRO LIMITED (1/2" TO 2") INDIA

12 LEADER VALVES LIMITED (1500# & 2500# UPTO 12", FORGING UPTO 2" 2500#)

INDIA

13 METROPOLITAN INDUSTRIES (SIZE=200mm, rating=2500 lb) INDIA

14 MICON ENGINEERS (HUBLI) PVT. LTD. (FORGED: UPTO 2" (1500#))

INDIA

15 NSSL LIMITED. (CAST: Upto 36"(900#), 24” (upto 2500#) & FORGED: Upto 2” (Upto 2500#))

INDIA

16 OSWAL INDUSTRIES LTD. (Upto 12” (900# & 1500#)) INDIA

17 SHALIMAR VALVES PVT.LTD.(CAST: UPTO 20"(900#), FORGED: ½" TO 1 ½" (1500#))

INDIA

18 WEIR BDK VALVES (A UNIT OF WEIR INDIA PVT. LTD.) (Cast UPTO 12" (upto 2500#) & Forged: Upto 2” (1500#), 1” (2500#))

INDIA

19 VELAN INC. ( UPTO 24” (Rating upto 2500#)) CANADA

20 BOTELI VALVE GROUP CO. LTD.(Cast Upto 16” (Upto 1500#), 12” (2500#) & Forged: Upto 2” (1500# & 2500#))

CHINA


22 BFE BONNEY FORGE VALVE LICENSEE ITALY

23 CESARE BONETTI SPA (Upto 24” (Upto 2500#) ITALY

24 FASANI S.P.A. ITALY

25 FRIULCO SPA (UPTO 32" (900#); 24" (1500#); 14" (2500#)) ITALY

26 GTC ITALIA S.R.L. ITALY

27 OMB S.P.A. ITALY

28 PETROL VALVES S.R.L. ITALY

29 VALVITALIA SPA ITALY

30 MATSURA H. P MACHINE WORKS CO.LTD. JAPAN


32 BABCOCK BORSIG ESPANA, S.A. SPAIN

33 POYAM VALVES, (AMPO S. COOP.) (SIZE UPTO 30" (RATING UPTO 2500#))

SPAIN

34 SUFA LIMITED U.A.E.

35 BEL VALVES U.K.

BALL VALVES (SOFT SEATED)

1 A V VALVES LIMITED (Upto 12” (Upto 600#)) INDIA




VENDOR LIST


0

DOCUMENT NO REV

SHEET 20 OF 35


2 AIRA EURO AUTOMATION PVT. LTD. (Upto 6”, Rating 150# & 300#), INDIA

3 AQUA VALVES PVT. LTD. INDIA

4 BRIGHTECH VALVES & CONTROLS PVT. LTD. (4” x 150# for CS, AS & SS material)

INDIA

5 CHEMTECH INDUSTRIAL VALVES PVT. LTD. INDIA

6 CRAWLEY & RAY (FOUNDER & ENGINEERS) PVT. LTD. (DN25) INDIA

7 DELVAL FLOW CONTROLS PVT. LTD. (Upto 12” (Upto 900#)) INDIA

8 FLOCON SYSTEMS PVT. LTD. (CS upto 6”, 150#) INDIA

9 FLOW CONTROL INDIA

10 FLOWCHEM INDUSTRIES ( UPTO 300# and upto 10”) INDIA

11 FLUIDTECH EQUIPMENT PVT. LTD( UPTO 4” (300#)) INDIA

12 FORWARD ALLOYS AND CASTINGS (Upto 900#) INDIA

13 GURU INDUSTRIAL VALVES PVT. LTD. (Cast CS only: Upto 12” (Upto 300#), 4” (Upto 900#) & Forged: Upto 2” (800#))

INDIA

14 HAWA ENGINEERS LTD. (Upto 16" (150# & 300#), Upto 12" (600# & 900#))

INDIA

15 INTERVALVE INDIA LTD. (Forged: Upto 2" (800#), Cast: Upto 12" (Upto 300#))

INDIA

16 JC VALVES & CONTROLS INDIA PVT. LTD. (CAST UPTO 28” (upto 600#),12” (900# , 1500#) & 10” (2500#))

INDIA

17 KSB PUMPS LTD. (VALVES DIVN.) (CS upto 100DN, 20 bar) INDIA

18 LEADER VALVES LTD. (Casting upto 600#, 6” & forging upto 800#, 2”)

INDIA

19 MICON ENGINEERS (HUBLI) PVT. LTD. (Cast: Upto 6” (150# & 300#) & Forged: Upto 2” (800#)

INDIA

20 MICROFINISH VALVES (P) LTD. INDIA

21 NSSL LTD. (Upto 12" (150# & 300#)) INDIA

22 OSWAL IND. LTD. (Upto 24" (150#, 300# & 600#)) INDIA

23 SHALIMAR VALVES PVT. LTD. (Upto 18" (600#) Material: CS/AS/SS) INDIA

24 VIBA FLUID CONTROL (Upto 300#) INDIA

25 VIRGO ENGINEERS LTD. (Upto 16" (upto 600#)) INDIA

26 WEIR BDK VALVES (Cast: Upto 30” (150# & 300#), 20” (600#), 16” (900#), 12” (1500#) & Forged: Upto 2” (800#))

INDIA

27 XOMOX SANMAR LTD.( FISHER XOMOX) INDIA

28 BHDT GMBH AUSTRIA

29 BOTELI VALVE GROUP CO. LTD. (Upto 32” (150# & 300#), 30” (600#), 24” (900#)

CHINA


31 VELAN INC.( UPTO 16”, 600#) CANADA




VENDOR LIST


0

DOCUMENT NO REV

SHEET 21 OF 35



33 PERRIN GMBH ( 2500#, SIZE UPTO 24”) GERMANY

34 FRIULCO SPA (UPTO 48" (150# & 300#); 20" (upto 1500#); 12" (2500#))

ITALY

35 CESARE BONETTI SPA (Cast: Upto 4" (150#) & Forged: Upto 1” (800#) Floating only)

ITALY

36 GTC ITALIA S.R.L ITALY

37 MANTOVANUI SPA ITALY

38 PIBIVESSE SRL (UPTO 48” , 600#) ITALY

39 PETROL VALVES S.R.L ITALY

40 METSO AUTOMATION SINGAPORE

41 POYAM VALVES (AMPO S. COOP.) (Size upto 42” (Rating upto 2500#))

SPAIN

42 HATIMA CORPORATION TAIWAN

BALL VALVES (METAL SEATED)

1 AIRA EURO AUTOMATION PVT. LTD. (Upto 6”, Rating 150# & 300#), INDIA

2 BRIGHTECH VALVES & CONTROLS PVT. LTD. (4” x 150# for CS, AS & SS material)

INDIA


4 GURU INDUSTRIAL VALVES PVT. LTD. (Cast CS only: Upto 12” (Upto 300#), 4” (Upto 900#) & Forged: Upto 2” (800#))

INDIA

5 HAWA ENGINEERS LTD. (Upto 16" (150# & 300#), Upto 12" (600# & 900#))

INDIA

6 INTERVALVE INDIA LTD.(UPTO 12” , 150#). INDIA

7 JC VALVES & CONTROLS INDIA PVT. LTD. (CAST UPTO 28” (upto 600#),12” (upto 1500#), 10” (2500#))

INDIA

8 MICON ENGINEERS (HUBLI) PVT. LTD. (Cast: Upto 6” (150# & 300#) & Forged: Upto 2” (800#)

INDIA

9 MICROFINISH VALVES (P) LTD. INDIA

10 NSSL LIMITED (Upto 12" NB, (150# & 300#)) INDIA

11 OSWAL INDUSTRIES LTD. (UPTO 24" (150#, 300#, & 600#)) INDIA

12 VIRGO ENGINEERS LTD. (UPTO16" (UPTO 600#)) INDIA

13 WEIR BDK VALVES (A UNIT OF WEIR INDIA PVT. LTD.) (Cast: Upto 30" (150# & 300#); 20" (600#), 16” (900#), 12” (1500#) & Forged: Upto 2” (800#)

INDIA

14 VELAN INC. (SIZE UPTO 16" (Rating Upto 600#)) CANADA

15 BOTELI VALVE GROUP CO. LTD. (Upto 32” (150# & 300#), 30” (600#), 24” (900#)

CHINA

16 ALFA VALVOLE SRL ITALY




VENDOR LIST


0

DOCUMENT NO REV

SHEET 22 OF 35


17 CESARE BONETTI SPA (UPTO 24" (150#) & 4" (UPTO 1500#) TRUNNION MOUNTED ONLY)

ITALY

18 GE POWER (NUOVO PIGNONE SPA) ITALY


20 PETROL VALVES S.R.L ITALY

21 PIBIVIESSE (48”, 600#) ITALY

22 VALVITALIA SPA ITALY

23 PERRIN GMBH (SIZE UPTO 24" (RATING UPTO 2500#)) GERMANY

24 RED POINT ALLOYS BV NETHERLAND

25 FRIULCO SPA (UPTO 48" (150# & 300#); 20" (UPTO 1500#); 12" (2500#))

ITALY

26 POYAM VALVES, (AMPO S. COOP.) (SIZE UPTO 42" (RATING UPTO 2500#))

SPAIN

27 METSO AUTOMATION SINGAPORE

28 ORBIT VALVES PLC SINGAPORE

BUTTERFLY VALVES

1 A V VALVES LIMITED (UPTO 48" (150#)) INDIA

2 ADVANCE VALVES (RUBBER LINED AND METAL SEATED) INDIA

3 AIRA EURO AUTOMATION PVT. LTD. (Upto 48”, Rating upto 300#) INDIA


5 BDK PROCESS CONTROL PVT LTD. (UPTO 1600MM) INDIA

6 CHEMTECH INDUSTRIAL VALVES PVT LTD INDIA

7 CRAWLEY & RAY (FOUNDER & ENGINEERS) PVT. LTD. (40mm-1000mm)

INDIA


9 FLOCON SYSTEMS PVT. LTD. (CS upto 12”, 150#) INDIA

10 FLUIDTECH EQUIPMENT PVT. LTD. (CS upto 12” (300#)) INDIA

11 FOURESS ENGINEERING (I) LTD. INDIA

12 HAWA ENGINEERS LTD. (2" to 48”(PN10/PN16/150#/300#)) INDIA

13 HAWA VALVES INDIA PVT. LTD. (CS UPTO 6", 150#) INDIA

14 HI-TECH BUTTERFLY VALVES INDIA PVT. LTD (<300#,<30"(TEFLON/RUBBER) ,<72"(METAL))

INDIA

15 INSTRUMENTATION LTD. (PALAKKAD) INDIA

16 INTERVALVE INDIA LTD. (Upto 72” (150#) & Upto 16” (300#)) INDIA

17 JC VALVES & CONTROLS INDIA PVT. LTD. (Upto 20” (150#) & 10” (300#))

INDIA

18 L&T LTD (1/2" TO 24") INDIA

19 LEADER VALVES LTD.(150#, upto 16”) INDIA




VENDOR LIST


0

DOCUMENT NO REV

SHEET 23 OF 35


20 MATHER & PLATT (INDIA) LTD. A SUBSIDIARY OF WILO SE GERMAN (UPTO DN 1600,PN10, Double flange type)

INDIA

21 METROPOLITAN INDUSTRIES (SIZE=2000mm) INDIA

22 MICON ENGINEERS (HUBLI) [PVT. LTD.(Upto 24” (PN10 & PN16)) INDIA

23 VENUS PUMP & ENGINEERING WORKS (upto 600NB, 150#) INDIA

24 VIRGO ENGINEERS LTD. ((Triple offset only): 3” to 24”, Upto 600# (CS/SS))

INDIA

25 WEIR BDK VALVES (A UNIT OF WEIR INDIA PVT. LTD.) (Upto 56” (Upto 250#), 24” (300#))

INDIA

26 XOMOX SANMAR LIMITED (FISHER XOMOX) INDIA

27 TOMOE VALVE CO. LTD. (Upto 48”(150# & 300#), Upto 24”(600#, 900# & 1500#))

JAPAN

28 BHDT GMBH AUSTRIA

29 VELAN INC. (Size upto 48”(Rating upto 600#) CANADA

30 BOTELI VALVE GROUP CO. LTD. (Upto 36” (150# & 300#) CHINA


32 GRISS SAPAG INDUSTRIAL VALVES FRANCE

33 ADAMS ARMATUREN GERMANY


35 HAITIMA CORPORATION TAIWAN

36 WEIR VALVES & CONTROLS DIVISION. U.K

37 LEEDS VALVE LTD U.K

38 CURTIS WRIGHT FLOW CONTROL CORPOARATION U.S.A.

39 LEAR SIEGLER MEAS. CTRLS. CORP U.S.A.

40 TYCO INTERNATIONAL INC.,U.S.A. U.S.A.

41 EMERSON PROCESS MGT U.S.A.

42 SPX VALVES & CONTROLS U.S.A.

43 XOMOS (CRANE CO.) U.S.A.

PLUG VALVES (NON LUBRICATED)

1 A V VALVES LIMITED (UPTO 48" (150#)) INDIA

2 AUDCO INDIA LTD (L&T VALVES DIVN.) INDIA

3 AZ ARMATUREN GMBH (1/2” TO 20”(150#, 300# & 600#), Matl. CS, AS &SS)

INDIA

4 BDK PROCESS CONTROL PVT LTD. INDIA

5 CHEMTECH INDUSTRIAL VALVES PVT LTD INDIA

6 CRAWLEY & RAY (FOUNDERS & ENGINEERS) PVT. LTD (DN 200) INDIA

7 FLUIDTECH EQUIPMENT PVT. LTD. (Upto 4” (300#)) INDIA

8 GURU INDUSTRIAL VALVES PVT. LTD. (Cast CS only: Upto 12” INDIA




VENDOR LIST


0

DOCUMENT NO REV

SHEET 24 OF 35


(Upto 300#), Upto 4” (Upto 900#)) & Forged: Upto 2” (800#))

9 HAWA ENGINEERS LTD. (1/2” TO 8” (150#)) INDIA

10 JC VALVES & CONTROLS INDIA PVT. LTD. (Upto 12” (Upto 300#)) INDIA

11 L&T LTD ( 1/2" TO 24") INDIA

12 LEADER VALVES LIMITED (Upto 6” (Upto 300#)) INDIA

13 WEIR BDK VALVES (A UNIT OF WEIR INDIA PVT. LTD.) (UPTO 16"(150#), 12" (300#), 3" (600#))

INDIA

14 XOMOX SANMAR LIMITED (FISHER XOMOX) INDIA


16 O.M.S. SALERI DI SALERI P & FIGLI S.M.C. ITALY

17 POYAM VALVES, (AMPO S. COOP.) (UPTO 30" (UPTO 900#) FOR LIFT PLUG VALVES ONLY.)

SPAIN

FLAT GASKETS

1 FERROLITE JOININGS (P) LTD. INDIA

2 GASKETS (INDIA) PVT. LTD INDIA

3 GOODRICH GASKET PVT. LTD. (UPTO 24") INDIA

4 HINDUSTAN ASBESTOS & ALLIED PRODUCTS INDIA

5 HINDUSTAN COMPOSITE LTD. INDIA

6 HINDUSTAN FERREDO LTD. INDIA

7 IGP ENGINEERS LIMITED INDIA

8 MADRAS INDUSTRIAL PRODUCTS(UPTO 48") INDIA

9 MECHANICAL PACKING INDUSTRIES LTD. INDIA

10 PACKING & JOINTINGS (P) LTD. INDIA

11 PERFECT MARKETING (P) LTD, INDIA

12 PRASHANT ENGG STORES INDIA

13 REIN TALBROS PVT. LTD. INDIA

14 SPIRALSEAL GASKETS PVT. LTD. (CAF & Teflon) INDIA

15 STARFLEX SEALING INDIA PVT. LTD. INDIA

16 THE BENGAL MILL STORES SUPPLY CO. (TRADER) INDIA

17 UNIQUE INDUSTRIAL PACKINGS PVT. LTD. INDIA

SPIRALLY WOUND GASKETS

1 GASKETS (INDIA) PVT. LTD INDIA

2 GOODRICH GASKET PVT. LTD. INDIA

3 IGP ENGINEERS LIMITED INDIA

4 MADRAS INDUSTRIAL PRODUCTS INDIA

5 PACKINGS & JOINTINGS PVT. LTD INDIA





VENDOR LIST


0

DOCUMENT NO REV

SHEET 25 OF 35


7 PRASHANT ENGG STORES INDIA

8 SPIRASEAL GASKETS PVT. LTD. INDIA

9 STARFLEX SEALING INDIA PVT. LTD. INDIA

10 THE BENGAL MILL STORES SUPPLY CO. (TRADER) INDIA

11 UNIQUE INDUSTRIAL PACKINGS PVT.LTD. (UPTO 42"(600#) & UPTO 24" (2500#))

INDIA

12 ZHEJIANG JIEHUA VALVE CO. LTD. INDIA

EXPANSION JOINTS & BELLOWS

1 CORI ENGINEERS PVT. LTD. INDIA

2 D.WREN & CO. (For Rubber & Fabric) INDIA

3 FLEXATHERM EXPANLLOW PVT. LTD. (Circular: Upto 240”, Rectangular No bar for size, (Upto 600#))

INDIA

4 FLEXICAN BELLOWS & HOSES PVT. LTD INDIA

5 FLUIDYNE ENGG. (I) PVT. LTD INDIA

6 KELD ELLENTOFT INDIA PVT. LTD INDIA

7 LONESTAR INDUSTRIES INDIA

8 MB METALLIC BELLOWS (INDIA) PVT. LTD INDIA

9 PRASHANT ENGG. STORES INDIA

10 STANDARD PRECISION BELLOWS INDIA

11 TUBOFLEX GERMANY

12 FLEXIDER S.P.A. ITALY

STRAINERS (PERMANENT INCLUDING Y-TYPE)

1 CHEMTECH INDUSTRIAL VALVES PVT. LTD INDIA

2 FLAIR STRAINERS & FILTERS (SIZE UPTO 42" (RATING UPTO 1500#))

INDIA

3 GRAND PRIX ENGINEERING PVT. LTD. (UPTO 60" PIPELINE, UPTO ANSI 1500#)

INDIA

4 GREAVES LIMITED INDIA

5 GUJARAT OTOFILT INDIA

6 HAWA ENGINEERS LTD. (1/2” to 24”(150# / 300#) INDIA

7 KWIKFLO FILTERS PVT. LTD. INDIA

8 LEADER VALVES LTD. (upto 300# & upto 12” size) INDIA

9 MULTITEX FILTERATION ENGINEERS LTD INDIA

10 MOD FABRICATORS INDIA

11 ZOLOTO INDUSTRIES (15MM TO 100MM) INDIA

12 BOTELI VALVE GROUP CO. LTD. (Y - TYPE ONLY: 14" (150#) & 3" (300# & 600#))

CHINA




VENDOR LIST


0

DOCUMENT NO REV

SHEET 26 OF 35


STEAM TRAPS

1 GREAVES LTD. INDIA

2 PENNANT ENGINEERING PVT. LTD. INDIA

3 VIRGO ENGINEERS LTD. (1/2” to 4” (upto 600#) (CS/SS)) INDIA

4 YARWAY CORPORATION INDIA

5 ZOLOTO INDUSTRIES (15 mm to 25 mm) INDIA

6 GESTRA AG GERMANY

7 ARMSTRONG INTERNATIONAL INC. U.S.A

8 OGONTZ CORPORATION U.S.A

9 TYCO INTERNATIONAL INC.,U.S.A. U.S.A

SPRING SUPPORTS

1 MYRICS PIPING SYSTEM PVT.LTD. INDIA

2 PIPE SUPPORTS INDIA PVT. LTD. INDIA

3 PIPING & ENERGY PRODUCTS (P) LTD. INDIA

4 SARATHI ENGG. ENTERPRISES PVT. LTD. INDIA

5 SPRING SUPPORTS MFG. CO. INDIA

6 FLEXIDER S.P.A. ITALY

FASTENERS

1 AEP COMPANY INDIA

2 CAPITAL INDUSTRIES INDIA

3 CONSOLE ENGG. & FASTNERS INDUSTRIES INDIA

4 EBY FASTNERS INDIA

5 FIT TIGHT NUTS & BOLTS LTD. INDIA

6 FIX FIT FASTENERS MFG. PVT. LTD. INDIA

7 INDUSTRIAL ENGINEERING CORPORATION (SIZE UPTO 4" (M100)) INDIA

8 MEGA ENGINEERING PRIVATE LIMITED (½" TO 3" MATERIAL: CS/AS/SS)

INDIA

9 METRO MECHANICAL PVT.LTD. INDIA

10 NAGBHUSHANAM INDUSTRIES INDIA

11 NIREKA ENGG. CO. PVT. LTD. INDIA

12 PACIFIC FORGING & FASTENERS PVT. LTD. (M 10 TO M125) INDIA


14 PIONEER NUTS & BOLTS PVT. LTD. INDIA

15 PRECISION AUTO ENGINEERS INDIA

16 PRECISION ENGINEERING INDUSTRIES INDIA

17 PTD FASTNERS PVT. LTD. INDIA




VENDOR LIST


0

DOCUMENT NO REV

SHEET 27 OF 35



19 SUNDARAM FASTENERS LIMITED INDIA

20 UDHERA FASTENERS INDIA

FIRE FIGHTING SYSTEM

1 AGNICE FIRE PROTECTION LTD. INDIA

2 BHARTIYA CACCIALANZA FIRE SYSTEMS LTD INDIA

3 BLUE STAR LTD. INDIA

4 DE'S TECHNICO INDIA

5 DE'S TECHNICO PVT. LTD. INDIA

6 FUTECH CONSULTANTS PVT. LTD. INDIA

7 GENERAL MECHANICAL WORKS INDIA

8 HD FIRE PROTECTION COMPANY INDIA

9 LAL ENTERPRISES INDIA

10 MATHER & PLATT (INDIA) LTD. (A Subsidiary

of WILO SE German)

INDIA

11 MX SYSTEMS INTERNATIONAL PVT. LTD. INDIA

12 NEWFIRE ENGINEERS SERVICES INDIA

13 PRAGATI ENGG. (PVT.) LTD. INDIA

14 PYROTEK INDUSTRIES (INDIA ) PVT. LTD. INDIA

15 RADIANT FIRE PROTECTION ENGINEERS INDIA

16 STEELAGE INDUSTRIES LTD. INDIA

17 TECHNOFAB ENGG. INDIA

18 TRI-PARULEX FIRE PROTECTION SYSTEMS INDIA

19 UNITECH MACHINES LTD INDIA

20 VIJAY FIRE PROTECTION SYSTEM LTD. INDIA

HOSE PIPE (METALLIC) & CAM LOCK COUPLING

1 AEROFLEX INDUSTRIES LIMITED (Size 6mm to 250mm dia. (SS Corrg. Flex. Hose with Braid, Braid & Assembly) INDIA

2 CHHATARIA RUBBER CHEMICALS INDUSTRIES INDIA

3 D. WREN & CO. INDIA

4 FLEXATHERM EXPANLLOW PVT. LTD. (1/2” to 6”) INDIA

5 GAYATRI INDUSTRIES INDIA

6 GAYATRI INDUSTRIAL CORPORATION (UPTO 6” ID) INDIA

7 HELIFEX HYDRAULICS & ENGG CO. LTD. INDIA

8 SENIOR INDIA PVT. LTD. INDIA

HOSE PIPE (NON-METALLIC) & CAM LOCK COUPLING

1 CHHATARIA RUBBER CHEMICALS INDUSTRIES INDIA




VENDOR LIST


0

DOCUMENT NO REV

SHEET 28 OF 35


4.0 ELECTRICAL

WALL MOUNTING TYPE DISTRIBUTION BOARDS 1. ADHUNIK SWITCHGEARS (P) LTD. INDIA 2. ANAND POWER LIMITED INDIA 3. ASSOCIATED SWITCHGEARS & PROJECTS

LTD. INDIA

4. AUTOMATIC CONTROLS CORPORATION INDIA 5. AVONE SYSTEM & CONTROLS INDIA 6. CONTROLS & SCHEMATICS PVT LTD. INDIA 7. C & S ELECTRIC LTD INDIA 8. ELECMECH CORPORATION INDIA 9. GLOBE ELECTRICAL INDUSTRIES INDIA

10. HAVELLS INDIA LTD. INDIA 11. HI-TECH ENGINEERS INDIA 12. HINDUSTAN CONTROL &EQPTPV. LTD. INDIA 13. INDIANA CURRENT CONTROL LTD. INDIA 14. INDO ASIAN FUSEGEAR LTD INDIA 15. INTRELEC INDIA

16. JAKSON ENGINEERS LTD INDIA

17. LEGRAND INDIA LTD INDIA

18. LOTUS POWERGEARPVT LTD INDIA

19. REUNION ELECTRICAL MANUFACTURERS (P) LTD

INDIA

20. SHIVALIC POWER CONTROL (P) LTD. INDIA

21. STANDARD ELECTRICALS LIMITED INDIA

22. TRICOLITE ELECTRICAL INDUSTRIES PVT. LTD.

INDIA

23. TRIDENT SWITCHGEARS PVT. LTD. INDIA

24. VENUS CONTROLS & SWITCHGEAR (P) LTD.

INDIA

MINIATURE CIRCUIT BREAKERS (MCB)

1. INDO ASIAN FUSEGEAR LTD INDIA


2 D. WREN & CO. INDIA

3 GAYATRI INDUSTRIES INDIA

4 GAYATRI INDUSTRIAL CORPORATION (UPTO 8” ID) INDIA

5 HELIFEX HYDRAULICS & ENGG CO. LTD. INDIA

6 PADMINI INDUSTRIES LIMITED INDIA

7 PYROTEK INDUSTRIES (INDIA) PVT. LTD. INDIA

8 SENIOR INDIA PVT. LTD. INDIA




VENDOR LIST


0

DOCUMENT NO REV

SHEET 29 OF 35


3. S & S POWER SWITCHGEAR LTD INDIA


5. SIEMENS INDIA

6. ABB INDIA

7. SCHNEIDER ELECTRIC INDIA

ELCB 1. GE POWER CONTROLS INDIA PVT. LTD. INDIA 2. HAVELLS INDIA LTD. INDIA

3. INDO ASIAN FUSEGEAR LTD INDIA


5. S & S POWER SWITCHGEAR LTD INDIA

6. SIEMENS LTD. INDIA


8. ABB INDIA 9. SCHNEIDER ELECTRIC INDIA

LOW VOLTAGE INDUSTRIAL SWITCHES/ISOLATORS 1. ASEA BROWN BOVERI LTD. INDIA 2. GE POWER CONTROLS INDIA PVT. LTD. INDIA 3. HAVELLS INDIA LTD. INDIA 4. KAYCEE INDUSTRIES LTD INDIA 5. LARSEN & TOUBRO

LTD.(EL.PRODUCTSDIVN) INDIA

6. SIEMENS LTD. INDIA 7. SCHNEIDER ELECTRIC INDIA

CONTACTOR / THERMAL O/L RELAY / FUSES 1. LARSEN & TOUBRO



PUSH BUTTONS 1. LARSEN & TOUBRO


2. SIEMENS LTD. INDIA 3. ASEA BROWN BOVERI LTD. INDIA 4. SCHNEIDER ELECTRIC INDIA

INDICATION LAMP 1. LARSEN & TOUBRO






VENDOR LIST


0

DOCUMENT NO REV

SHEET 30 OF 35


3. BINOY INDIA

INDUCTION MOTORS – HV (11KV & 3.3 KV) 1. BHEL (ELECTRICAL MACHINES DIVN.) INDIA

2. JEUMONTINDUSTRIE FRANCE 3. FUJI ELECTRIC SYSTEMS CO. LTD JAPAN 4. MITSUBISHI CORPORATION JAPAN

5. TOSHIBA CORPORATION JAPAN

6. TOSHIBA MITSUBISHI ELECTRIC INDUSTRIAL SYSTEMS CORPORATION (EXCLUDING FLAME-PROOF MOTORS OF FRAME SIZE MORE THAN 900)

JAPAN

7. PEEBLES ELECTRICAL MACHINES UK 8. SIEMENS INDIA / GERMANY 9. ABB FINLAND/SWITZERLAND/

INDIA

INDUCTION MOTORS – LV (415 V) ( SAFE AREA) 1. ASEA BROWN BOVERI LTD INDIA

2. BHEL (ELECTRICAL MACHINES DIVISION) INDIA

3. CROMPTON GREAVES LTD INDIA

4. KIRLOSKAR ELECTRIC COMPANY LTD INDIA

5. SIEMENS LTD INDIA / GERMANY 6. SIEMENS AG, GERMANY GERMANY 7. ANSALDOROBICON ITALY 8. FUJI ELECTRIC SYSTEMS CO. LTD. JAPAN 9. TOSHIBA CORPORATION JAPAN

10. ASEA BROWN BOVERI INDIA /SWEDEN 11. GENERAL ELECTRIC CO. USA

INDUSTRIAL TYPE SW. SOCKET & PLUG 1. BALIGA LIGHTING EQUIPMENTS LIMITED INDIA

2. CHLORIDE POWER SYSTEMS AND SOLUTIONS LTD. (FORMERLY CALDYNE)

INDIA

3. CROMPTON GREAVES LTD INDIA

4. CYCLO ELECTRIC DEVICES & SERVICES CO.

INDIA

5. EX-PROTECTA INDIA

6. FCG FLAMEPROOF CONTROL GEARS PVT. LTD. (FORMERLY CEAG FLAME

INDIA

7. FCG POWER INDUSTRIES LTD INDIA

8. FLAMEPROOF EQUIPMENTSPVT. LTD. INDIA

9. LEGRAND INDIA LTD INDIA 10. LEGRAND S.A. FRANCE 11. BBC-BROWN BOVERI&CIE AG GERMANY




VENDOR LIST


0

DOCUMENT NO REV

SHEET 31 OF 35


12. R STAHL SCHALTGERATEGMBH GERMANY 13. WEIDMULLER LTD. GERMANY 14. CORTEM S.P.A. ITALY

HOSE PROOF INDUSTRIAL LIGHTING FIXTURES

1. BAJAJ ELECTRICALS LIMITED INDIA

2. CROMPTON GREAVES LTD. INDIA

3. KESELECSCHREDER PRIVATE LIMITED INDIA

4. PHILIPS INDIA LTD. INDIA

5. SPACEAGE SWITCHGEARS LIMITED INDIA

6. SURYA ROSHNI LTD. INDIA

7. WIPRO LIGHTING INDIA

HT POWER CABLES

1. CABLE CORPN. OF INDIA LIMITED INDIA

2. DIAMOND POWER INFRASTRUCTURE LTD INDIA

3. KEC INTERNATIONAL LTD. (FORMERLY RPG CABLES LIMITED

INDIA

4. KEI INDUSTRIES LIMITED (UPTO 33 KV) INDIA

5. NICCO CORPORATION LTD INDIA

6. RAVIN CABLES LIMITED INDIA

7. TORRENT CABLES LTD. INDIA

8. UNIVERSAL CABLES LTD. INDIA

9. UNIFLEX INDIA LT POWER CABLES

1. CABLE CORPN. OF INDIA LIMITED INDIA 2. CORDS CABLE INDUSTRIES LTD INDIA 3. DELTON CABLES LTD INDIA 4. FINOLEX CABLES LTD INDIA 5. INDUSTRIAL CABLES (I) LIMITED (1.1 KV PVC/XLPE

INSULATED) INDIA

6. J K CABLES LIMITED INDIA


INDIA

8. KEI INDUSTRIES LIMITED INDIA


10. PLAZA CABLE INDUSTRIES LIMITED INDIA

11. RAVIN CABLES LIMITED INDIA

12. TORRENT CABLES LTD INDIA


14. POLYCAB INDIA LT CONTROL CABLES (1.1 KV)

1. CABLE CORPN. OF INDIA LIMITED INDIA 2. CORDS CABLE INDUSTRIES LTD. INDIA




VENDOR LIST


0

DOCUMENT NO REV

SHEET 32 OF 35


3. DELTON CABLES LTD INDIA

4. FINOLEX CABLES LTD INDIA


INDIA

6. KEI INDUSTRIES LIMITED INDIA

7. NICCO CORPORATION LTD INDIA 8. PLAZA CABLE INDUSTRIES LIMITED INDIA

9. RADIANT CABLES PVT. LIMITED INDIA 10. RAVIN CABLES LIMITED INDIA 11. TORRENT CABLES LTD. INDIA

12. UNIVERSAL CABLES LTD. INDIA 13. MIRACLE CABLES INDIA 14. POLYCAB INDIA

CABLES FOR EARTHING 1. ADVANCE CABLE TECHNOLOGIES (P) LTD. INDIA 2. DELTON CABLES LTD INDIA

3. FINOLEX CABLES LTD INDIA

4. GUPTA ELECTRIC & MACHINERY STORES (GEMSCAB)

INDIA

5. J K CABLES LIMITED INDIA

6. NETCO CABLE INDUSTRIES (PVT.) LTD. INDIA


8. PRESTIGE CABLE INDUSTRIES INDIA

9. SHYAM CABLES INDUSTRIES INDIA

10. SPECIAL CABLES PVT. LTD. INDIA

11. T C COMMUNICATION PVT LTD INDIA


CABLE JOINTING KITS

1. RAYCHEM RPG LTD. INDIA

PRE-FABRICATED AL-CABLE TRAYS

1. GLOBE ELECTRICAL INDUSTRIES INDIA 2. HINDUSTAN VIDYUT PRODUCTS INDIA 3. INDIANA ENGG WORKS PVT LTD INDIA 4. INDMARKFORMTECH PVT. LTD. INDIA 5. JAMNA METAL COMPANY INDIA 6. KANADEANANDUDYOG PVT. LTD. INDIA 7. MAHESHWARI ELECTRICAL MFRS. (P) LTD. INDIA

8. METALITE INDUSTRIES INDIA

9. PAREKH ENGINEERING COMPANY INDIA

10. PREMIER POWER PRODUCTS (CALCUTTA) PVT. LTD.

INDIA

11. RUKMANI ELECTRICALS & COMPONENTS PVT LTD INDIA




VENDOR LIST


0

DOCUMENT NO REV

SHEET 33 OF 35


12. SADHANA ENGINEERING CORPORATION INDIA

13. SREEATREYA ENTERPRISES INDIA

14. STEALITEENGG CO INDIA

PRE-FABRICATED G.I. CABLE TRAYS

1. GLOBE ELECTRICAL INDUSTRIES INDIA 2. INDIANA ENGG WORKS PVT LTD INDIA 3. INDMARKFORMTECH PVT. LTD. INDIA 4. JAMNA METAL COMPANY INDIA 5. KANADEANANDUDYOG PVT. LTD. INDIA 6. MAHESHWARI ELECTRICAL MFRS. (P) LTD. INDIA


8. PAREKH ENGINEERING COMPANY INDIA

9. PREMIER POWER PRODUCTS (CALCUTTA) PVT. LTD.

INDIA



12. SLOTCO STEEL PRODUCTS PVT. LTD.

13. SREEATREYA ENTERPRISES INDIA


HOSE PROOF LOCAL CONTROL STATION 1. BALIGA LIGHTING EQUIPMENTS LIMITED INDIA 2. BHARTIA INDUSTRIES LTD. (DIVN. BCH) INDIA

3. C & S ELECTRIC LTD. INDIA

4. EX-PROTECTA

5. FCG FLAMEPROOF CONTROL GEARS PVT. LTD. (FORMERLY CEAG FLAME)

INDIA

6. FCG POWER INDUSTRIES LTD. INDIA 7. FLAMEPROOF EQUIPMENTS PVT. LIMITED INDIA 8. HOTLINE SWITCHGEAR & CONTROLS INDIA

9. POWER ENGG CO INDIA

HOSE PROOF JUNCTION BOXES

FRP CABLE TRAYS 1. ENERCON INDIA 2. ERCON COMPOSITES (UPTO 600 MM WIDE) INDIA 3. KEMROCK INDIA 4. SATYAM INDUSTRIES INDIA 5. SINTEX INDUSTRIES LTD. INDIA 6. SUMIP COMPOSITES PVT LTD. INDIA




VENDOR LIST


0

DOCUMENT NO REV

SHEET 34 OF 35


1. BALIGA LIGHTING EQUIPMENTS LIMITED INDIA 2. BHARTIA INDUSTRIES LTD. (DIVN. BCH) INDIA 3. EX-PROTECTA INDIA 4. FCG FLAMEPROOF CONTROL GEARS PVT. LTD.

(FORMERLY CEAG FLAME) INDIA

5. FLAMEPROOF EQUIPMENTSPVT. LTD. INDIA 6. FCG POWER INDUSTRIES LTD INDIA

EARTHING & LIGHTNING PROTECTION MATERIAL – (AL) WIRE/STRIP

1. ANAND ELECTRIC TRADING CO. INDIA 2. C & S ELECTRIC LTD. INDIA 3. INDMARKFORMTECH PVT. LTD. INDIA 4. JAYANT METAL MFG. CO. INDIA 5. PREMIER POWER PRODUCTS (CALCUTTA) PVT.

LTD. INDIA

6. JAMNA METAL COMPANY INDIA 7. MAHAVIR INDUSTRIAL CORPORATION INDIA

8. METROPOLITAN INDUSTRIES INDIA

9. SAI GALVANISERS & FABRICATORS PVT LTD INDIA

EARTHING & LIGHTNING PROTECTION MATERIAL – (GI) WIRE/STRIP

1. ANAND ELECTRIC TRADING CO. INDIA 2. CONTROLS & SWITCHGEAR CO. LTD. INDIA 3. JAYANT METAL MFG. CO. INDIA 4. INDMARKFORMTECH PVT. LTD. INDIA 5. PREMIER POWER PRODUCTS (CALCUTTA) PVT.

LTD. INDIA

6. JAMNA METAL CO. INDIA 7. MAHAVIR INDUSTRIAL CORPORATION INDIA

8. METROPOLITAN INDUSTRIES INDIA

9. SAI GALVANISERS & FABRICATORS PVT LTD INDIA

10. BHARTI EXPORTS INDIA





GI PIPES & CONDUITS

1. BHARTI EXPORTS INDIA

2. INDIAN TUBE CO. (TATA DIV. OF TUBES & PIPES) INDIA

3. JINDAL PIPES LTD. INDIA

4. MEGHJYOT ENTERPRISES INDIA


6. STEELCRAFT INDIA




VENDOR LIST


0

DOCUMENT NO REV

SHEET 35 OF 35


INDUSTRIAL CABLE GLAND 1. BALIGA LIGHTING EQUIPMENTS LIMITED INDIA 2. COMET BRASS PRODUCTS INDIA 3. COMET INDUSTRIES INDIA 4. DOWELL'S ELECTRICALS INDIA 5. ELECTROMAC INDUSTRIES INDIA 6. FCG FLAMEPROOF CONTROL GEARS PVT. LTD.

(FORMERLY CEAG FLAME INDIA

7. GLAND-MECH. INDUSTRIES INDIA 8. INDUSTRIAL PRODUCTS EQUIPMENT INDIA 9. POWER ENGG CO INDIA 10. QUALITY & PRECISION INDL. EQUIPMENT INDIA 11. S J METAL INDUSTRIES (JAINSON) INDIA

CABLE LUGS

1. DOWELL'S ELECTRICALS INDIA 2. FORWARD ENGG INDUSTRIES INDIA 3. KSE ELECTRICAL PVT. LTD. INDIA 4. MG ELECTRICA INDAI 5. POWER ENGG CO INDIA 6. S J METAL INDUSTRIES (JAINSON) INDIA 7. USHA MARTIN INDUSTRIES LTD. (ISMALDIVN) INDIA

Rev.

SCHEDULE OF RATES (SOR)

1

PNPM/PC‐

150/E/112/NCB/

SEC‐VII

Document No.

FOR MECHANICAL WORKS (SUPPLY & ERECTION)

FOR

CONSTRUCTION OF RAW WATER AND FIRE WATER RESERVOIR AND PUMP HOUSE & ALLIED FACILITIES

SCHEDULE OF RATES FOR MECHANICAL WORKS (SUPPLY & ERECTION)

For Issuance For Issuance

Issued for review & Comment

AT

TALCHER FERTILIZERS LTD., ANGUL ODISHA

10P

REV

JKYDILIPDILIP

CHECKED BYPREPARED BY APPROVED BY

GCGC

GC

DESCRIPTION

16.12.1914.03.19

JKYDILIPDILIP

RAW WATER AND FIRE WATER RESERVOIR AND PUMP HOUSE & ALLIED FACILITIES

26.02.19

DATE

FORM NO: 02‐0000‐0021F2 REV1 SHEET 1 of 1 All Rights Reserved

S. No. GENERAL INSTRUCTIONS TO BIDDER1 The Schedule of Rates is to be read in conjunction with Technical Specification for Electrical System for Construction of Raw Water Reservoir

and Allied Services & its attachments and other relevant sections / sub sections of NIT.

2 The rates shall be applicable for all floors, heights and depths.3

This being an item rate contract, the unit rate shall prevail, correction of errors (if any) shall be done as per clause no. 30 Section III of ITB.

4 Owner/Consultant reserves the right to interpolate or extrapolate the rate for any item, which is not covered in the Schedule of rates, from the rates available for similar item / work in the Schedule of Rates.

5 Whenever it is mentioned in the specifications that the bidder shall perform certain work or provide certain facilities/materials or certain item or activity is in bidder’s scope of services it is understood that the bidder shall do so at his cost within the item rates unless expressly stated otherwise.

6 Unit rates for erection shall inclusive of Unloading from Truck/ Trailer, transportation from store (at site), handling, the cost of labour, supervision, all consumables, cost towards providing erection materials & hardware, necessary tools and tackles, and providing all the required facilities for execution and inspection, testing and commissioning, guarantees etc. Minor repair and touch painting work towards providing all required facilities for execution shall be in bidder’s scope.

7 Work shall involve, at every stage, correct identification of all equipment including loose equipment from stores, identifying spare items/ excess items, listing the same and carefully storing them under the custody of the contractor. Information to this extent shall be passed on to the concerned Owner’s Engineer-in-charge / owner. Certification of balance items after erection and return to the Owner’s Engineer in-charge so assigned.

8 All equipment shall be deemed to have clear tags, descriptive letter writing indicating locations / sources (from - to), cable sizes, circuit no., unit no., and any other writing required to make installation completely informative. All costs in view of above shall be deemed to have been included in installation/ commissioning.

9 All primary & secondary injection tests & testing of relays and other equipment as per relevant IS, code of practice for testing and commissioning shall be deemed to have been included for testing & commissioning. No extra charges shall be provided for that. Testing of motors, including re-greasing, and at least 4 hour run shall be included in the motor testing & commissioning.

10 This being a grass root job, the Contractor must visit TFL, Talcher site to assess the quantum and nature of work before quoting. However, the Contractor shall inform PDIL / TFL, 1 week prior to their visit.

11 Quantities mentioned in the Schedule of Rates are indicative and not exhaustive in nature. Payment shall be made as per actual quantity used/certified at site by Owner’s Engineer-in-charge.

12Contractor shall indicate the prices of all electrical items as per attached documents. The quantities indicated in Schedule of Rates are estimated quantities and may change during detailed engineering as per site condition. Quantity of some or all the items may increase or decrease up to any extent at the time of actual execution, for variation in value of contract please refers clause no. 60.2 of GCC.

PREAMBLE TO SCHEDULE OF RATES FOR RAW WATER AND FIRE WATER RESERVOIR, PUMP HOUSE AND SERVICES AT TFL TALCHER

13 The Tenderers shall note that the quantities of the different Items, as given in the "Schedule of Rates" are tentative based on tentative tender drawings and are subject to variation and they shall not be entitled to claim any higher rate or compensation on this account. Owner / Consultant reserve the right to change / modify the size and type of sections at any time. Owner / Consultant do not guarantee work under each item of the Schedule of Quantities. Quantity of some or all the items may increase or decrease up to any extent at the time of actual execution, for variation in value of contract please refers relevant clause of GCC.

14 Un-priced Price Schedule indicating the word “Quoted” (with prices blanked out) against each item shall be attached with bid documents for

15 Owner reserve their right to execute any additional works / extra works, during the execution of Work, either by themselves or by appointing any other agency, even though such works are incidental to and necessary for the completion of works awarded to the Contractor. In the event of such decisions taken by Owner, Contractor is required to extend necessary cooperation, and act as per the instructions of Engineer-in-Charge.

16 Before procurement of any equipment / material, the Contractor shall submit drawing / document, Compliance Statement supported by

17 Quoted rates shall also cover the cost towards fabrication of steel structure, its painting with two coats of epoxy paint, after surface

18 All GI materials shall have zinc coating of 610 gm/Sq.m at any point on its surface unless indicated otherwise in the schedule of rates. 19 The portion, which is under "HOLD" shown in the approved drawing (if any) or the portion, which would be brought under "HOLD" during

20 Quoted rates shall remain firm till completion of work including all extensions granted for any reasons whatsoever.21 All heavy machinery including Cranes, Hydra, etc for the job (if required) shall be in the bidder’s scope.22 Bidders are required to undertake all the safety precautions as deemed fit and necessary by statutory authorities and/or

23The plans have been evolved tentatively based on information available with Owner / Consultant but the dimensions and details etc. are liable to changes. The Tenderers shall not be entitled to claim any higher rate or compensation on this account. The tender drawings are intended mainly to give an indication of the probable type of construction. The successful Tenderers will, however, be required to execute the work as per detailed approved drawings issued to them from time to time. Steel structures can be changed to R.C.C. or vice versa. Owner reserves the right to add / delete any of the building works mentioned in the N.I.T., during the currency of the contract..

24 The Tenderers shall be fully responsible for the correct setting out and execution of the work in accordance with approved drawings which will be supplied to them progressively. All tools, tackles, construction equipments etc., required for the successful execution / construction of the complete work shall be responsibility of the Tenderers.

25Quantities indicated in Schedule of Rates are approximate and subject to variation on either side. The quantity of individual item may be deleted. Contractor shall not be entitled for any compensation on this account and the quoted rates shall hold good for such quantity variationsetc. Payments on bills shall, however, be made on actual measurements of quantities of work done as per approved drawings. Unless otherwise specified, measurements of civil quantities shall be taken as per Indian Standards IS: 1200.

26 The rates to be inserted in the "Schedule of Rates" are to be inclusive of the value of the work described under several items including all costs and expenses which may be required for the construction of the work described together with all taxes, general risks, liabilities and obligations such as temporary buildings / hutments, fencing, watching, lighting, insurance, labour regulations, indemnity, maintenance and the like. The prices shall be inclusive of all labours, materials, tools, plants, equipment, hoists, tackles, scaffoldings, the sundries, etc., as may be necessary for the completion of the work in all respects.

27 Any fabrication / construction done before final approval of the drawings shall be the Contractor's responsibility.

28No work shall be undertaken at site until detailed approved drawings have been issued by the Owner / Consultant in writing. Subsequent revision in the drawings which become necessary shall be incorporated and revised drawings issued to the Contractor who shall execute the work as per the latest revised drawings. Nothing extra will be paid on this account and no claim whatsoever will be entertained on this account. The Owner / Consultant reserves to themselves the right to modify / revise / alter etc. in any drawing supplied to the Contractor.

29In case of any discrepancy between the description of items given in the "Schedule of Rates" and Specifications, drawings and other documents, the decision of the Owner / Consultant in writing shall be final, binding and conclusive for the purpose of this contract.

30 The term "Design and drawings" mentioned in the description of Items in the "Schedule of Rates" means the detailed approved design drawings marked "Good for Construction".

31 The work "As described", "As shown", "As directed" or "As approved", "As mentioned" in the description of Items shall mean as directed in design or detailed drawings and as directed by the Engineer-in-Charge.

1

2

3

4

5

6

7

Bidder

Name :

1

i MT 25 INR 0.00 No Rupees Only

2

Tender Inviting Authority : PDIL on behalf of Talcher Fertilizers Ltd.

Stactic / Moving machineries

SUPPLY & ERECTION OF NEW EQUIPMENTS & MACHINERIES ETC.

PART ‐A

Notes :

NIT Ref. : PNPM/PC‐150/E/112/NCB

The order will be placed on overall lowest (L‐1) basis.

Quoted

CurrencyUNITS

Unloading from trailer, truck, etc. and placing on firm ground over suitable support / sleepers

etc. as desired by Owner/Consultant at a place to be decided by Owner/Consultant of

equipment foundations. However, effort shall be made to erect the equipment directly from

tailor to foundation to avoid unloading for which payment shall not be made against

unloading of equipment.

UNLOADING OF EQUIPMENT

BASIC UNIT PRICE In

Figures To be entered by

the Bidder

(Including all taxes,

duties, levies, etc, except

GST )

TOTAL AMOUNT in

Figures

(Including all taxes,

duties, levies, etc, except

GST )

S.No DESCRIPTIONAPPROX

QTY.

SCHEDULE OF RATES FOR EQUIPMENTS AND PIPING WORKS

Prices shall be quoted strictly as per the Price Schedule Format made available herein without altering any of the contents of the "Price Schedule Format".

Vendor shall include Prices towards all Mandatory & Commissioning Spares, Special Tools & Tackles, Export Sea‐worthy Packing, Forwarding, FOB Charges, Inland Freight, Testing & Third

Party Inspection Charges, Insurance upto Port of Exit, Loading (on ship), all duties and Taxes, other charges payable outside India including Export Licensing etc. Supplier shall be responsible

and no additional cost/ time shall be paid in case commissisonig spares/ special tools & tackles over and above those quoted by supplier are required.

PRICE SCHEDULE

(This BOQ Template must not be modified/ replaced by the Bidder and the same should be uploaded after filling the relevant columns, else the Bidder is liable to be rejected for this Tender. Bidders are allowed to enter the

Bidder Name and Numeric Values only)

Name of Work : CONSTRUCTION OF RAW WATER AND FIRE WATER RESERVOIR, PUMP HOUSE AND SERVICES AT TALCHER FERTILIZERS LTD., ANGUL, ODISHA

TOTAL AMOUNT in Words

(Including all taxes, duties, levies, etc, except

GST )

Per diem rates as quoted by the Bidder, shall be basis for payment in case assistance is required during commissioning however actual payment for service shall be based on actual mandays

consumed at site.

Please submit Unpriced copy of this Price Schedule indicating either "QUOTED" or "NOT QUOTED" against each item.

Please enter Value in Cells Highlighted in Yellow only.

Price to be entered in Indian Rupees Only


i Nos 3 INR 0.00 No Rupees Only

ii No. 1 INR 0.00 No Rupees Only

3

Lot 1 INR 0.00 No Rupees Only

Complete works of supply & Erection of Pumps, Motors, Machineries, flanges, fittings,

transportation and inspection charges but not limited to, the following items in accordance

with PMS (piping material specification), relevant specifications & drawings indicated in

Technical specification under this tender documents and instructions of Engineer‐in‐charge

and as per all provisions of the CONTRACT.Transportation of Equipments/SKID etc. from

Owner/ Consultant’s stores/storage yard; dismantling & reassembly / reinstatement of

structures, building sheets (if required) etc., to facilitate for erection, assembly of parts / sub‐

assemblies; checking, cleaning, chipping and preparing the top of foundation and cleaning of

pockets for erection; placing the equipments, machinery & SKID etc., on foundation or

structure;

Rates shall include cost of labour, deployment of tools & tackles, consumables, Materials and

other associated arrangements required to execute all activities. Grouting shall be paid as per

Cl. 2.0 of SOR when using SHRINKOMP or equivalent. For cost of grouting using ordinary

grouting, including supply of materials shall be included in the unit rates of erection of

equipments, machinery & SKID etc. without any extra cost to Owner.

MOVING MACHINERY PUMPS WITH ITS DRIVE MOTOR ETC.FOR Water supply to Raw Water

Reservoir AS PER TS IN NIT

MOVING MACHINERY PUMPS WITH ITS DRIVE MOTOR ETC.FOR for makeup water supply to

Fire water reservoir AS PER TS IN NIT

SUPPLY & ERECTION OF EOT CRANE

Supply & Erection of EOT Crane (Double girder) of Suitable capacity including its drives and

all other relevant electrical items as per TS attached elswhere in the tender documents.This

covers the technical requirements of design, engineering,manufacture, testing at works,

supply at site, erection, site testing and commissioning of the complete electrical equipment

and accessories as required for the overhead travelling crane and hoists.

leveling, alignment, bolting, welding, grouting; fixing of internals; first maintenance &

carrying out testing / carrying out alignment, trial runs and start up runs and providing

manpower for testing, rectifying and defect and completion of works in all respects including

earthing protection by way of fixing strips and electrodes as per drawings & specifications.;

completion of all jobs as per drawings, scope of work & technical conditions as defined in the

enquiry specifications, standards, codes and all jobs are to be carried out as per the

instruction and to the full satisfaction of the Engineer‐in‐Charge/Owner. Job also includes

supplying of all types of tools, tackles, lifting arrangements, tractor trolley & equipments,

machineries all consumables and labour to complete the job in a workman like manner,

erection and removal of steel scaffolding wherever required, area preparation for hot job

and area cleaning after completion of work including blinding, deblinding, removal of

insulation, gas cutting of bolts, chipping of foundation, flushing wherever required.


4

i M3 2 INR 0.00 No Rupees Only

5

5.1

i MTR. 192 INR 0.00 No Rupees Only

ii MTR. 264 INR 0.00 No Rupees Only

iii MTR. 114 INR 0.00 No Rupees Only

5.2

20",OD 762

36",OD 914

ASME B36.10

ASME B36.10

ASME B36.10

VALVE

GATE VALVE

Arrangement of all additional lands required for Contractor's storage, fabrication, access for

construction, etc. procurement and supply of all materials, consumables, equipment, labour

and other inputs, carrying out all temporary, ancillary, auxiliary works, etc. make ready for

commissioning of pipeline as per drawings, specifications, other provisions of Contract

document and instructions of Engineer‐in‐charge, including but not limited to carrying out

the following works.

Barricading the pipeline construction area prior to execution to the entire satisfaction of

Owner / Engineer‐in‐charge.

SHRINKOMP‐20 Or Conbextra GP‐2

ITEM SIZE SPECN SCH/THK MATERIAL

SCH 10

SCH 10

Pipes

SCH XS

ERW,API 5L GR.B

ERW,API 5L GR.B ,C & W

ERW/SAW,ASTM API 5L

GR.B

CS PIPES BE

CS PIPES BE

CS PIPES BE

20",OD 508.0

GROUTING

Grouting works include supply of materials, manpower, and necessary arrangement for

application of grouting as per technical specification, vendor’s requirement and instruction of

Owner/Consultant. Machineries with ≥500 H.P., Araldite of M/s CIBA Geigy or equivalent

shall be used. For tall towers having height more than 10 Meter and weight more than 25

MT, SHRINKOM ‐ 20 or Conbextra GP‐2 shall be used. However, for balance equipments /

machineries and structurals ordinary 1:1:2 cement grout mix added with anti‐shrinkage

compound shall be used without any extra cost to Owner.

Carrying out inspection of materials including line pipes at the time of laying/ installation of

line pipes, associated valves, tees, insulating joints, flanges & fittings for buried application of

all sizes, thickness & ANSI class rating and accessories as per specification wherever required

depending on site condition.

SUPPLY OF PIPING ITEMS

FOR U/G PIPING

"Supply , taking over" as defined in the specifications, handling, loading, transportation,

unloading and Laying of bare/coated line pipes and other materials like valve, fittings,

flanges, from Contractors suppliers locations/works etc. to Contractor's stock

yard/workshop/work‐site including preliminary activities, preparation of drawings, wherever

required for crossing etc. Handling, stacking, stringing of the UG pipes ,



ii Nos 19 INR 0.00 No Rupees Only

iii Nos 11 INR 0.00 No Rupees Only

iv Nos 4 INR 0.00 No Rupees Only

5.3


5.4




5.5




5.6


36”ASME B16.47

SR.B

150 #

150 #,SCHXS

GASKET (SPRL‐

WND RF)

GASKET(SPRL‐WND

RF)

20”

36”


GASKET (SPRL‐

WND RF)18” ASME B16.20 150#

ASTM A105,WN‐RF 125

AARH


FLANGE(WELD

NECK)

GASKET

36” GAV210 150#

CS BODY ASTM A216 GR

WCB

FLANGES

ITEM SIZE SPECN

150#CHECK VALVE

(FLNG)20" CHV210

MATERIAL ITEM SIZE SPECN

CS BODY ASTM A216 GR

WCB

CHECK VALVE

STUD & NUTS


ASTM A193 GR.B7/ASTM

A194 GR.2H

150#

TP304 SS WDG;GPH

FLR;TP304 SS INR RNG;CS

OTR RNG

ASME B16.20

TP304 SS WDG;GPH


OTR RNG

ASTM A105, SO‐RF 125

AARH

ASTM A105, SO‐RF 125

AARH

SCH/THK

TP304 SS WDG;GPH


OTR RNG

STUD & 2NUTS

HVY HEX11/8" 150

ASME

B16.20/B16.4

7 SR.B

150#

18” ASME B16.5 150 #

GATE VALVE(FLNG)

GATE VALVE(FLNG) 20” GAV210 150#CS BODY ASTM A216 GR

WCB

FLANGE

(SLIP ON)

CS BODY ASTM A105,

SOCW

GAV201 800#

SCH/THK

CS BODY ASTM A105GATE VALVE

(SOCW)1/2”

GATE VALVE

(SOCW)3/4” GAV201 800#

20” ASME B16.5

FLANGE

(SLIP ON)

MATERIAL




5.7



5.8



5.9


5.10



5.11

i No. 1 INR 0.00 No Rupees Only



5.12

i No. 5 INR 0.00 No Rupees Only


ASTM A234 WPB‐WLDD

ASTM A193 GR.B7/ASTM

A194 GR.2H

3000#

SOCKOLET

ASTM A234 WPB‐WLDD,

BW

ITEM SIZE

TEE (BW) 36X36


SCH/THK MATERIAL


ELBOW

ELBOW 900, 1.5D 36”BW ASME B16.9 SCH XS

275ASTM A193 GR.B7/ASTM

A194 GR.2H

11/8" 160

20”BW ASME B16.9 SCH 10

STUD & 2NUTS

HVY HEX

STUD & 2NUTS

HVY HEX11/2"

MSS SP 97


SOCKOLET

(SOCW)

TEE

ELBOW 900, 1.5D

SCH/THK

ASTM A105

ASTM A105

ASTM A105

ASME B16.9 SCH XS X

SCH XS

TEE (BW) 20X20 ASME B16.9 SCH10 X

SCH10

REDUCER ECC.(BW) 20"X18" ASME B16.9SCH10X SCH

10,

150#,RF 125

AARH

SPECN SCH/THK MATERIAL

SPECL BLIND

FLANGE

ASTM A234 WPB‐WLDD,

BW

ITEM SIZE SPECN

ITEM SIZE SPECN SCH/THK

REDUCER

ITEM SIZE SPECN MATERIAL

MATERIAL

ASTM A105

SOCKOLET

(SOCW)36"X3/4” 3000# ASTM A105

20"X3/4” MSS SP 97


BLIND FLANGE 36”ASME B16.47

SR.B

150#,RF 125

AARH

BLIND FLANGE 40”ASME B16.47

SR.B

150#,RF 125

AARH

CAP(CS)

20” ASME B16.48

BLIND FLANGE

CAP, THD 1/2" ASME B16.11 3000# ASTM A105

CAP, THD 3/4" ASME B16.11 3000# ASTM A105


5.13




iv Nos 20 INR 0.00 No Rupees Only

5.14


6.0

6.1

ASME B36.10 SCH160

NIPPLE, PLN‐PLN 3/4" ASME B36.10 SCH160

SCH/THK MATERIAL

SMLS,API 5L GR.B

SMLS,API 5L GR.B

SMLS,API 5L GR.B

SMLS,API 5L GR.B

BRANCH WELD WITH RP


NIPPLE, PLN‐THD,

NPT1/2" ASME B36.10 SCH160

NIPPLE, PLN‐PLN 1/2" ASME B36.10 SCH160

ITEM SIZE SPECN

NIPPLE, PLN‐THD,

NPT

CARBON STEEL BW

FABRICATION & ERECTION OF ABOVE GROUND (A‐G) PIPING

Transportation of all piping materials from storage point to work site/shop including from

shop to work site, cleaning, stacking, surface preparation/shot blasting of piping, supply &

application of paints and primers (including all coats‐primer, intermediate & final coats) for

piping and equipments as per enclosed painting specification in NIT,prefabrication /

fabrication at shop and/or site including marking, cutting, edge preparation, beveling,

bending, etc., providing all branch connections, re‐enforcement pads, threading etc., welding

of all fitting and specials, erection including lifting, placing, installing of supports etc. at all

levels and locations, leveling, aligning, jointing of flanges including insertion of gaskets, orifice

plates, spectacle blinds etc., bolting, joining by threading or welding, ,connecting the system

to the required other system, equipments, pumps, including hook up of new lines with

existing lines, and welding of Tie‐in points as per tie‐in list, installation of all in line fittings /

all type of valves / Instruments / strainers / filters / spray nozzles / traps, safety / control

valves rapture disc, flow meters, flow orifice etc. as applicable including shifting to &

collection from painting contractor’s shop for erection, hydro testing, flushing and blowing,

seal/leak testing and making ready for commissioning as per drawings, specification

,standards ,codes, instructions of Owner/Consultant and scope of work defined in

Tender. Welding shall include all the examination and testing required such as but not

limited to radiography, ultrasonic, magnaflux /dye check etc and pre and post heat

treatment wherever required.

The cost towards radiography only shall be paid separately as per SOR Cl.7.0 . Unit rates shall

include the cost of supervision, labour, overheads/profits, consumables, and other

associated arrangements required to execute all the related activities.

The quoted rates shall include seal welding of thermocouples, Orifice flange plug, nipple, and

hydro testing drain and vents caps.

NB SCH/THKO.D.

PIPE: SMLS,API 5L GR.B/ERW,API 5L GR.B

BRANCH WELD

WITH RP36"X20" ASME B31.3

SCHXS X

SCH10

NIPPLE

3/4"


i Mtr. 10 INR 0.00 No Rupees Only

ii Mtr. 210 INR 0.00 No Rupees Only

iii Mtr. 120 INR 0.00 No Rupees Only

6.2

A

i M3 500 INR 0.00 No Rupees Only

iiM3 200 INR 0.00 No Rupees Only

iii

M3 200 INR 0.00 No Rupees Only

iv


VI


viM3 100 INR 0.00 No Rupees Only

3/4"

20"

Same as above but lift from 1.5 Mtr.to 3.0 Mtr.

Providing and filling with fine river sand in trenches a layer of 150 mm from BOP(Bottom of

pipe) and 200 mm top of pipes(In case of pipe size>24" NB) and for pipe<24" filling of sand in

trenches shall be 150mm from BOP and 100 mm from top of pipe including watering,

ramming, consolidating and complete dressing.

Filling with available earth excavated without stones & unwanted materials in the treanches

in layer other than Sr. No. III. In depth consolidation each deposited layer by ramming and

watering all complete.

Removal or excess excavated materials after back filling of trenchesfrom site of work to other

area in factory premises, as directed by ownerand spreading and leveling the same.

Cutting and disposal of RCC, PCC and paved surface at all level other than I & II

36"

26.7

508

762

SCH 80

SCH 10

SCH XS

UNDER GROUND (U‐G) PIPING WORKS:

EARTHWORK

Excavation of trenches for pipelines in all kinds of soil including soft and hard rock mixed in

nature both dry and wet conditions including dressing of sides and bottom getting out

excavated material in the approved dump yard in all leads of 100 meter including spreding

and leveling as per instruction of owner/Consultant.


B

i Mtr. 275 INR 0.00 No Rupees Only

C

i Sq. M. 500 INR 0.00 No Rupees Only

7.0 ERECTION OF VALVES

FABRICATION & ERECTION OF UNDER GROUND (U‐G) PIPING‐ERW,API 5L GR.B/SMLS,API 5L

GR.B:‐"Taking over" as defined in the specifications, handling, loading, transportation,

unloading and Laying of bare/coated (Wrapping coating shall be paid seperatly as per clause

no‐4c) Piping and other materials like valve, fittings, flanges, from Contractors suppliers

locations/workws etc. to Contractor's stock yard/workshop/work‐site including preliminary

activities, preparation of drawings, wherever required for crossing etc. Handling, stacking,

stringing of the UG pipes , Carrying out inspection of materials including line pipes at the time

of laying/ installation of pipes, associated valves, tees, insulating joints, flanges & fittings for

buried application of all sizes, thickness & ANSI class rating and accessories as per

specification wherever required depending on site condition. Arrangement of all additional

lands required for Contractor's storage, fabrication, access for construction, etc. procurement

and supply of all materials, consumables, equipment, labour and other inputs, carrying out

all temporary, ancillary, auxiliary works, etc. make ready for commissioning of pipeline as per

drawings, specifications, other provisions of Contract document and instructions of Engineer‐

in‐charge,Barricading the piping construction area prior to execution to the entire

satisfaction of Owner / Engineer‐in‐charge.

SCH/THK

SCH 10

O.D.

50820"

NB

COATING AND WRAPPING OF UNDERGROUND PIPING

Procurement and supply of all Cold Tape type coating and wrapping materials, manpower,

equipments, consumables and necessary arrangements for surface preparation and

application shall be in the scope of Contractor. All oil, grease, rust, mill scale, soil, dust,

previous paint if any or foreign matters shall be completely removed from pipe surface prior

to priming. Surface cleaning and preparation shall consist of cleaning and degreasing by Grit /

Shot blasting and or power scraping, using most suitable method or a combination therefore,

both followed by carefully removal of the dust according to the specification ISO 8501‐1:

1988 SA 2.5.

The coating continuity shall be visually 100% checked by electric Holiday detector to detect

and search of particles and other inclusion, pinholes, cavities, cracks and other ruptures. All

defects visually detected or by Holiday detector shall be clearly marked and all defects in the

coating shall be made good immediately after their inspection.

COATING AND WRAPPING OF UNDERGROUND PIPING: As per C&W‐TS

Cold Tape Type (Two layer = Inner wrap and Outer wrap.)


A



B


i

ii

iii

8.0

A

PIPE SUPPORTS

SUPPLY & FABRICATION OF PIPE SUPPORTS

Supply & Fabrication of pipe supports as per drawings, standards, Specifications, NIT

conditions & instructions of Owner/Consultant. The rate shall include the cost of materials

, consumables, surface preparation & application of primer, labour overheads/profits

etc.

PS 1

FLANGED/SCREWED VALVES

20” to 24"

30” to 36"

SW/BW VALVES

Up to 3/4"

Above includes valves of all materials, rating, IBR/Non IBR.

Above includes all types of valves.

CATEGORY MATERIAL OF CONSTRUCTION

Means carbon steel supports.

Means alloy steel supports (Alloy steel parts of supports only)

Means stainless steel supports (SS parts of Support only)

PS 2

PS 3

WAFER TYPE VALVES shall be treated as flanged valves

NOTES:

Transportation from storage points to shop/site, (including testing and setting of safety

valves but excluding testing of control valves which shall be issued from Owner/

Consultant's stores or instrument contractor's shop/stores), installation in position by

threading, bolting or welding as per drawings, specifications, standards / codes,

instructions of Owner/Consultant and scope of work defined in NIT. Welding shall include

all the examination and inspection required such as but not limited to radiography,

ultrasonic, magnaflux, dye check etc, pre and post heat‐treatment wherever required.

The cost towards radiography shall be paid separately as per Cl 7 of Schedule of Rates,

whereas the cost of all other tests is included in the rates quoted as per Cl. 5.0 Of

Schedule of Rates. Rates shall also include the cost of supervision, labour, Overhead /

profits, consumables, statutory approval and conditions listed in preamble to Schedule of

Rates and other associated arrangements required to execute all the related activities.

The quoted rates shall also include tightening of gland packing and bonnet flange of valves if

required during hydro‐testing of piping.

Description


i MT 2 INR 0.00 No Rupees Only

B

MT 10 INR 0.00 No Rupees Only

i

ii

9.0

A

All structural work under this enquiry has been divided in to two categories:

CATEGORY‐A

Equipment platforms , valve operating platforms, ladders and

hand railing (but excluding gratings) and any other additional

equipment supports, if required , to be fabricated at site.

Galvanized Gratings (35 mm)CATEGORY‐B

PS 1

Category of Supports

STRUCTURAL STEEL WORKS

The rates for above items shall be quoted for supply, fabrication and Erection as per the

format below. Structural steel is also to be arranged and supplied by CONTACTOR.

Supply, Fabrication & Erection of Steel Structure

Notes for 8 (a) & (b):

Irrespective of whether pipe supports and/or pipe support materials are

supplied by Contractor or Vendor, all fasteners such as bolts, studs, nuts,

washers etc., are to be supplied by Contractor at his cost.

PS 6

PUF supports

Means Turn buckles (Forged)

Means Spring support (Free Issue)

PS 4

ERECTION OF PIPE SUPPORTS

Erection of supports fabricated by Contractor and/or supplied by vendors. The rate shall

include cost of erection as part of piping, welding (including dissimilar welding), labour,

consumables, application of finish paint, overheads/profits etc to complete all related

activities as per ITB and instruction of Owner/ Consultant.

Category of Supports

PS‐1

PS 5

Welding for supports shall include preheating and all tests (excluding

radiography & stress relieving, which shall be paid separately) such as dye‐

penetrent test, hardness test etc. as required by standards, codes, specifications

and instructions of Owner/Consultant.


MT 1 INR 0.00 No Rupees Only

MT 0.5 INR 0.00 No Rupees Only

1

2

3

10.0

A

i Inches 100 INR 0.00 No Rupees Only

ii Inches 110 INR 0.00 No Rupees Only

B

i Inches 100 INR 0.00 No Rupees Only

ii Inches 110 INR 0.00 No Rupees Only

i

The rate shall include cost of preparation, submission and obtaining approval of fabrication

drawings from CONSULTANT, labour, materials, consumables, surface preparation &

application of primer, tools & tackles and other associated arrangement required to execute

all the related activities. The cost shall also include cost of bolts, nuts, washers and anchor

bolts. The rate shall include cost of withdrawal and transportation from

OWNER/CONSULTANT’S stores /storage yard (if prefabricated structurals issued by

OWNER/CONSULTANT) or from his own stores/ shop to place of erection, grouting

Description

CATEGORY‐A

CATEGORY‐B

Prior approval shall have to be obtained from OWNER/CONSULTANT, in writing for

making a change in sections due to non‐availability of certain sections or using built‐

up section, compound sections, for fabrication of built‐up compound sections either

recommended by CONSULTANT or CONTRACTOR, no extra payment shall be made.

For hand railing under clause 7(c).1 pipes shall also be supplied by CONTRACTOR.

During execution of piping etc. gratings may have to be cut and the same shall be

repaired by cold galvanization (Zinc spray) of thickness 80 microns after proper

surface preparation. This activity shall be deemed covered within the unit rate of

erection of grating and nothing extra shall be paid for this.

In‐situ (Erected position) using

3" wide film

4" wide film

3" wide film

4" wide film

Length and width of film to be used which shall be decided by Owner before

execution of radiography.

RADIOGRAPHY (GAMMA RAY)

The unit rate shall include cost of radiograph viewer and films, consumables, scaffolding,

manpower, overheads/profits etc. Payment shall be made only for those films after

examination for joints found acceptable as per codes, standards & NIT. Films for defective

joints shall not be paid. Overlapping Length of radiography film is not payable.

Description

At outside, the place of erection using film size

Note:

NOTES:


ii

a

b

iii

iv

11.0

i MANDAY 10 INR 0.00 No Rupees Only

ii MANDAY 10 INR 0.00 No Rupees Only

iii MANDAY 10 INR 0.00 No Rupees Only

0.00

No Rupees Only

1

1.1 Nos 2 INR 0.00 No Rupees Only

1.2 No. 1 INR 0.00 No Rupees Only

a

b

c

d

1.3 No 3 INR 0.00 No Rupees Only


a

Erection of pressure transmitter , this job includes following

Calibration of transmitter

Pressure transmitter erection / installation (Including drilling of blind flange where

ever required, impulse piping including , glanding, and termination, erection of

Statction & Supports Canopy etc). Supply structural & piping material for this job Is in

Hydrotest, PMI, DP tests of impulse lines

functional check, loop checking

Supply of Radar type Level transmitter as per specification attached with this tender ( 2 main

+ 1 spare)

Erection of Radar type Level transmitter , this job includes following


Unskilled: Helper, Khalasi.

As a guide line the radiography film shall be used as below: ‐

Payment shall be made on the basis of weld length radiographed & for those

joints which are found acceptable.

SCHEDULE OF RATES FOR INSTRUMENT SUPPLY & INSTALLATION WORKS

Supply of pressure transmitter as per specification attached with this tender ( 1 main + 1

spare)

PART B

Transmitters Supply & Erection

TOTAL AMOUNT FOR EQUIPMENT & PIPING ERECTION WORKS (IN RS.)

Length of radiographed film shall be calculated (O.D. x 3.14) in inch.

3" wide film shall be used up to 4" dia pipes

4" wide film shall be used above 4" dia pipes

Assistance during PRE COMMISSIONING/COMMISSIONING

The rate below shall be inclusive of Contractor's supervision, hand tools, all equipments &

machinery, consumables, contractor's supervision, over‐head and profits.

Category of Personnel

Semi Skilled (with hand tools): Pipe Fitter, Gas Cutter, Rigger, Electrician (for welding m/c).

Skilled (with hand tools, equipment/machinery, consumables): Welder, Millwright Fitter


b

c

d



a

b

c

d

1.7

No 4 INR 0.00 No Rupees Only

a

b

2.0



3.0



4.0

i Mtr 1000 INR 0.00 No Rupees Only

ii

iii Mtr 500 INR 0.00 No Rupees Only

iv Mtr 10 INR 0.00 No Rupees Only

v Mtr 1000 INR 0.00 No Rupees Only

vi

Hydrotest, PMI, DP tests of impulse lines,


Supply of Flow transmitter as per specification attached with this tender ( 1 main + 1 spare)

Erection of Flow transmitter, this job includes following




Statction & Supports Canopy etc) Supply structural & piping material for this job Is in

bidders scope , bidder to consider the cost of these items

Hydrotest, PMI, DP tests of impulse lines


Deleted

Supply Of Junction Boxes with glands as per Specification mentioned in ITB

Erection/Installation of JB as per specification including glanding termination ,ferruling,

painting etc.

Instrumentation Cables

Supply of instrumentation cables ( as per specification provided in ITB)

12Px 1.5 Ssqmm

Deleted

01Px 1.5 Sqmm

Cable laying

12Px 1.5 Sqmm

Vibration Switch

Supply of vibration switch/Transmitter along with special cable,( if any) , transmitter (if

any)shall be done by Pump vendor

Glanding Termination ,ferruling of Vibration switches to Control system

Functional Check & Loop Testing



Statction & Supports Canopy etc) Supply structural & piping material for this job Is in

bidders scope , bidder to consider the cost of these items

Pressure gauges

Supply Of pressure Gauges as per Specification mentioned in ITB ( 4 main + 1 spare)

Pressure gauge erection / installation (includes impulse piping and necessary support

fabrication & installation as per the hookup attached in ITB.). Supply structural & piping

material for this job Is in bidders scope , bidder to consider the cost of these items

Junction Box


vii Mtr 500 INR 0.00 No Rupees Only

5..0

5.1


ii Mtr 50 INR 0.00 No Rupees Only


5.2


ii Mtr 50 INR 0.00 No Rupees Only


6.0

i No 3 INR 0.00 No Rupees Only

ii No 3 INR 0.00 No Rupees Only

7.0

i No 1 INR 0.00 No Rupees Only

0.00 No Rupees Only

1.

1.1

A. Nos. 4 INR 0.00 No Rupees Only

1.2


2.

2.1


B. Nos. 3 INR 0.00 No Rupees Only

PART C

SCHEDULE OF RATES FOR ELECTRICAL SUPPLY & INSTALLATION WORKS

LOCAL CONTROL STATION ( LCS )

TOTAL AMOUNT FOR INSTRUMENT SUPPLY & INSTALLATION WORKS (Rs.)

Supply of Weather Proof Local Control Station of following type, as specified in Technical

Specification PC150/E/112/P‐II/Sec 6.0.

LCS with Trip‐Neutral‐Close control switch with Ammeter & 5 nos. indication lamp.

Installation, testing and commissioning of weather proof Local control stations of following

type, including shifting of control stations from store to the site of erection, fixing control

stations with nuts & bolts, on already erected supports / nearby structure / walls etc.

connecting control cable for control switch , ammeter & Indication lamp as required and

testing to make the installation complete in all respect as per approved drawings,

specifications and direction of Owner’s Engineer‐in‐charge. Supply of all required hardware

for mounting shall be in Contractor’s scope.

LCS with Trip‐Neutral‐Close control switch with Ammeter & 5 nos. indication lamp

INTER LOCKED TYPE SW SOCKET & PLUG

Supply of Heavy duty Hoseproof & Weather proof interlocking Switch Socket having

enclosure with IP–65 degree of protection with matching Plug of following type as specified

in Technical Specification PC150/E/112/P‐II/Sec 6.0.

63A, 5‐pin, 415V (Weather Proof)

25A, 3 pin, 240V (Weather Proof)

Supply of Orifice plate with flanges ( 1 pair of gaskets as spare) as per specification attached

in ITB Erection will be a part of Piping

Aluminum Cable Trays (Perforated) size 2500 x 200 x 55

01Px 1.5 Sqmm

Cable Trays

Supply of cable trays as per specification in ITB



Aluminum Cable Trays (Perforated) Size2500 x 50 x 55

Erection Of cable trays including supports


Aluminum Cable Trays (Perforated) Size2500 x 50 x 55

Cable Glands ( Panel Side )

Supply Of Cable Glands (1” NPT)

Glanding in panel Side (1” NPT)

Orifice plate with flanges


2.2



3.

3.1

A. No. 4 INR 0.00 No Rupees Only

4.

4.1

A. Mtrs. 20 INR 0.00 No Rupees Only

4.2

B. Mtrs. 20 INR 0.00 No Rupees Only

5.

5.1



5.2

D. Mtrs 300 INR 0.00 No Rupees Only

E. Mtrs 900 INR 0.00 No Rupees Only

F. Mtrs 1300 INR 0.00 No Rupees Only

G. Mtrs 100 INR 0.00 No Rupees Only

H. Mtrs 1200 INR 0.00 No Rupees Only

I. Mtrs. 20 INR 0.00 No Rupees Only

Testing and commissioning of 3‐Phase, Squirrel Cage, Weatherproof Induction Motors of

following ratings excluding cable glanding, cable termination, dehydration of windings but

including checking & replenishment/ replacement of bearing grease/ lubricant; checking of IR

values between each winding & motor frame & checking of continuity of rotation, if required,

by changing supply connections; trial runs on NO LOAD & ON LOAD; supply of approved

grease/ lubricant & necessary hardware; all work, labour & materials complete as per

specifications, documents, codes & standards & directions of Owner’s Engineer‐in‐charge.

(Contractor to keep proper record of tests on motors for NO LOAD & ON LOAD runs).

3.3 kV Motors of Rating upto 500 kW

Installation, testing and commissioning of interlocked type switch sockets with matching

plugs complete with cable glands, lugs, terminal blocks etc. of following ratings:

63A, 5‐pin, 415V (Weather Proof)

25A, 3 pin, 240V (Weather Proof)

Motors

G.I. Pipes

Supply of G. I. pipes; Medium Class as per IS 1239 (part‐1) of following sizes :

100 mm NB

Installation of G.I. pipes of following sizes for cable protection, floor sleeves etc. fixed on a

steel structure, concrete, laid in trenches including concrete cutting, bending, threading etc.

to a clamp, nuts, bolts sockets, reducers, spacers, plug, bushing, chipping of concrete floor,

breaking of concrete cable trench, walls and complete with all labour and material as per

directions of engineer‐in‐charge.

100 mm NB

Cables

Supply of 3.3 KV (UE) Grade, XLPE Insulated, PVC inner sheathed, Armoured, FRLS PVC outer

sheathed cables as specified in Technical Specification Doc. No. PC150/E/112/P‐II/Sec‐6.0 &

its attachments of following sizes

3C x 240 sq. mm (Al)


Supply of 1.1 KV Grade, XLPE Insulated, PVC inner Sheath, Armoured, FRLS PVC outer

sheathed cables LT Power & Control Cable / Earthing cable as specified in Technical

Specification PC150/E/112/P‐II/Sec‐6.0 & its attachments, of following sizes

3.5 C x 70 sqmm (Al)


3 C x 2.5 sqmm (Cu)

12 C x 2.5 sqmm (Cu)


1C x 10 Sqmm (Al) Earthing Cable


A.

i. Mtrs. 1200 INR 0.00 No Rupees Only

ii. Mtrs. 100 INR 0.00 No Rupees Only

B.

i. Mtrs 300 INR 0.00 No Rupees Only

ii. Mtrs 900 INR 0.00 No Rupees Only

iii. Mtrs 1300 INR 0.00 No Rupees Only

iv. Mtrs 100 INR 0.00 No Rupees Only

v. Mtrs 1200 INR 0.00 No Rupees Only

vi. Mtrs. 20 INR 0.00 No Rupees Only

5.4

A.

i.

Nos. 8 INR 0.00 No Rupees Only

ii.


B.

i. Nos. 2 INR 0.00 No Rupees Only

ii. Nos. 6 INR 0.00 No Rupees Only

iii. Nos. 12 INR 0.00 No Rupees Only

iv. Nos. 2 INR 0.00 No Rupees Only

v. Nos. 8 INR 0.00 No Rupees Only

vi. Nos. 2 INR 0.00 No Rupees Only

5.3

Horizontal and vertical laying, testing (before and after laying) and commissioning of above

HV/LV Power & Control cables in readymade trenches, on pre‐fabricated cable trays / racks,

on already installed risers, support hangers, saddles etc. pulling through pipes on walls /

columns, steel structures including transportation, including supply and fixing of necessary

saddles, saddle bars, cable tags, Al clamps for cables laid vertical on walls / columns /

structures, risers with all labour, consumable materials and necessary hardware to make

installation complete in all respect as per approved standard drawings and direction of

Owner’s Engineer‐in‐charge.

This also includes drilling, taping of cable insulation, crimping of lugs to the conductor,

connection of the lugs to equipment terminal, supply and fixing of G.I. nuts, screws, bolts,

washers and other necessary hardware, PVC tape of required grade for taping, making cable

entries dust and vermin proof, earthing etc. as per instruction of manufacturer, approved

drawings, specifications and directions of Owner’s Engineer‐in‐charge.

3.3 KV (UE) Grade XLPE Insulated, PVC inner sheathed, Armoured, FRLS PVC outer sheathed

cables



1.1 KV Grade XLPE Insulated, PVC inner Sheath, Armoured, FRLS PVC outer sheathed cables



3 C x 2.5 sqmm (Cu)




Supply of heavy duty Industrial double compression ET Thread rolled Aluminum cable glands

suitable for 3.3 kV grade / 1.1 KV Grade, XLPE Insulated, PVC inner Sheath, armoured, FRLS

PVC outer sheathed cables of the following sizes of cables as specified in Technical

Specification Doc. No. PC150/E/112/P‐II/Sec‐6.0 & its attachments of following sizes.


cables






3 C x 2.5 sqmm (Cu)





5.5

A.

i.



B.







5.6

A.

i.



B.







5.7

A.

i.



6.

Supply of Tinned Copper / Aluminum crimping type lugs of following sizes for termination of

3.3 kV / 1.1 kV grade cables.

3.3 kV grade cables

240 sq. mm (Al)

185 sq. mm (Al)

1.1 kV grade cables

70 sqmm (Al)

50 sqmm (Al)

35 sqmm (Al)

25 sqmm (Al)

2.5 sqmm (Cu)

10 sqmm (Al)

End termination and subsequent testing of XLPE/PVC insulated single core / multi core

armoured Cables of 3.3 kV/ 1.1 KV grade, Al / Cu cable using suitable excluding supply of

glands & lugs but including Glanding, all labour and consumable materials to make

installation complete in all respect. The rate shall include drilling, taping of cable insulation,

crimping of lugs to the conductor, connection of the lugs to equipment terminal, supply and

fixing of G.I. nuts, screws, bolts, washers and other necessary hardware, PVC tape of required

grade for taping, making cable entries dust and vermin proof, earthing etc. as per instruction

of manufacturer, approved drawings, specifications and directions of engineer‐in‐charge.







3 C x 2.5 sqmm (Cu)




Supply of following types of cable termination kit :

Indoor type Heat shrinkable end termination kit of Raychem make suitable for 3.3 KV grade

XLPE‐A‐FRLSPVC insulated armoured cables of following sizes

3.3 kV (UE), 3 X 240 sq. mm (Al) XLPE armoured cables

3.3 kV (UE), 3 X 185 sq. mm (Al) XLPE armoured cables

CABLE RACK (PREFABRICATED LADDER TYPE GI CABLE TRAYS) & ACCESSORIES


6.1

A.



iii. Mtrs. 50 INR 0.00 No Rupees Only

B.




C.




D.




E.

i. No. 2 INR 0.00 No Rupees Only

ii. No. 2 INR 0.00 No Rupees Only


F.



6.2

A.



iii. Mtrs. 50 INR 0.00 No Rupees Only

B.




C.



iii. No. 1 INR 0.00 No Rupees Only

D.


Supply of GI ladder type Cable trays and their accessories i.e. supply of all hardware required

i.e. J‐hooks, GI Nut, Bolt, Washers, coupling plate etc. of following sizes and as per Technical

Specification Doc. No. PC150/E/112/P‐II/Sec‐6.0 & its attachments and drawing enclosed.

Straight Run Cable Trays

600mm wide

300mm wide

150mm wide

Horizontal Bends

600mm wide

300 mm wide

150mm wide

Vertical Inside Bends

600mm wide

300mm wide

150mm wide

Vertical Outside Bends

600mm wide

300mm wide

150mm wide

Regular Tees

600mm wide

300mm wide

150mm wide

Reducers

600/300mm wide

300/150mm wide

Installation, laying and connecting of GI ladder type Cable trays and horizontal & vertical

bends and regular Tees of different radii of various sizes on already erected supports or

risers, including joining various cable trays by bolting with G.I. bolts, nuts & washers as per

approved drawings (including fixing J‐hooks, reducer coupler plate, adjustable coupler plate

through supply of GI Nut Bolts, Washers etc) as per the desired cable route and as per the

drawings and directions of Engineer‐in‐charge.

Straight Run Cable Trays

600mm wide

300mm wide

150mm wide

Horizontal Bends

600mm wide

300 mm wide

150mm wide

Vertical Inside Bends

600mm wide

300mm wide

150mm wide

Vertical Outside Bends

600mm wide




E.

i. No. 2 INR 0.00 No Rupees Only



G.



7.

7.1 Nos. 2 INR 0.00 No Rupees Only


8.

8.1

A.


B.


Reducers

600/300mm wide

300/150mm wide

DISTRIBUTION BOARDS

Supply of 415 V Lighting sub Distribution Board 9‐way wall mounted Sheet enclosed Hose &

Weather Proof Lighting Sub Distribution Board in IP55 degree of protection having 1 No.

Incoming (63 A TP & Switched Neutral Isolator switch) and 3nos feeder circuit of 63A DP MCB

and ELCB (300/10mA) having 9 Nos. outgoing of 16/25 A DP MCB (i.e. 3 nos. 16 A DP MCB

per circuit), as specified in Technical Specification PC150/E/112/P‐II/Sec‐6.0 & its

attachments.

Installation, testing and commissioning of 415 V, 9 way wall mounted Lighting sub

Distribution Boards including supply and fabrication of epoxy painted MS frame, operational

and functional checking, drilling of gland plates with requisite holes, fixing of cable glands,

plugging of all unused cable entries and other holes found in the boards to make the same

dust and vermin proof with all labour and consumable materials to make installation

complete as per approved drawings, specifications and directions of engineer‐in‐charge.

LIGHTING fixtures & accessories

Supply of Lighting Fixtures & Accessories

300mm wide

150mm wide

Regular Tees

600mm wide

300mm wide

150mm wide

240V AC,1‐Ph, hose and weather proof Lighting fixtures, electronic drivers, cable glands and

other accessories, internal & external reflectors, louvers, etc. suitable for use in safe area

having IP‐65 degree of protection complete with all accessories and all hardware for fixing

the lighting fittings with ceiling / wall / pole/ frame of following types as specified in

Technical Specification Doc. No. PC150/E/112/P‐II/Sec‐6.0 & its attachments.

120 W Outdoor LED Flood lighting fixtures

240V 1‐ph suspension/ wall mounted T5 type LED Lighting Fixture with/ without reflector

having IP20 Protection

2 x 20 W LED Philips make suspension mounted Lighting Fixture with vitreous enameled

reflector type fixture and lamps.


8.2



9.



10.

10.1

A.

Installation, connection, testing and commissioning of pre‐wired fluorescent/ LED Lighting

fixtures along with integral /non‐integral control gears, lamps, tubes, chokes, starters,

condensers, mounting accessories, including cable glanding, crimping of lugs on cable

conductor & connecting cables at fixtures, earthing, junction boxes, etc. including supply of

all connecting materials like clamps, supports, conduits, down rods etc. as required as well as

transportation from store to site of erection with all labour and material to make installation

complete in all respect as per approved drawings, specifications and directions of engineer‐in‐

charge. The rates shall be valid for all mounting heights.

250 W HPSV Hose proof & weather proof Streetlight fixtures with separate control gear

complete with weatherproof cable glands, plug suitable for 3 X 2.5 mm2 XLPE‐A‐PVC cable

and stopping plug.

2x20 W LED recess/suspended mounting FTL type Lighting Fixture including supply and

installation of mounting accessories.

JUNCTION BOXES

Supply of 25A, 230V, 1Ph & N 4 Way type hose proof & weatherproof Junction Boxes in cast

aluminium (LM6) enclosure with IP–65 degree of protection and suitable for 3Cx2.5

sq.mm(Cu) cable with cable glands, terminal blocks and threaded plug of suitable size for

easy termination of cables and as specified in Technical Specification ‐ Electrical System (Doc.

No. PC150/E/112/P‐II/Sec‐6.0 & its attachments).

Installation, connection, testing and commissioning of 25A, 230V, 1Ph & N 4 Way type hose

proof & weatherproof Junction Boxes, including cable glanding, crimping of lugs on cable

conductor & connecting cables, earthing etc. including supply of all connecting materials like

clamps, supports etc. as required as well as transportation from store to site of erection with

all labour and material to make installation complete in all respect as per approved drawings,

specifications and directions of engineer‐in‐charge. The rates shall be valid for all mounting

heights.

Wiring

Point Wiring

Primary Point



B.


11.



Supply, installation, testing & commissioning of Point Wiring system for primary light

point/ceiling fan point/exhaust fan point/ light plug point inclusive of the cost for providing

circuit wiring from LSDB to switch boards with 2x2.5 sq.mm.,1.1 KV grade PVC multi stranded

fire resistant insulated copper conductor wire for light in required size of heavy duty GI

Conduit with accessories and 14swg bare copper earth wire continuity conductor including

providing/fixing of PVC conduit of required size. Item shall also include wiring from LSDB to

point/fitting with 2x1.5 sq.mm copper conductor PVC insulated wire of 1100V grade with 14

SWG copper wire as earth continuity conductor for light in appropriate size of GI conduit

including providing & fixing GI conduit with accessories such as bends, JB, sockets etc.

required size of MS zinc passivated modular box with white inner plate and glossy white

outer module plate for housing modular switch, sockets, fan regulators (Electronic heavy

duty step up type) on modular plate etc,The rates shall include cutting and refilling of chases/

Wall etc. including internal connections as required. All switch sockets shall be modular type

fixed on modular plate. Make of modular plate, board, switch, socket etc shall be as per

approved Make

Secondary Point

Supply, installation, testing & commissioning of Point Wiring system for light point/ceiling fan

point/exhaust fan point/ light plug point from switch boards with 2x2.5 sq.mm., multi

stranded PVC insulated unsheathed copper conductor fire retardant wires of 1100V grade in

recessed GI conduit including providing and fixing heavy duty GI Conduit of required size

complete with accessories such as bends, JB, Pull Boxes etc with plate, switches, sockets,

screws and covers, Zinc Passivated MS modular boxes (16 gauge sheet construction) of

suitable sizes, embedded in wall, concealed and flush with walls including cutting and refilling

the chases/ Wall etc and inclusive of 14 SWG bare copper earth conductor for socket outlets

as per specifications & direction of Engineer in charge. All Modular type switch & socket shall

be of approved make with 6A switch mounted side by side with 2x2.5 sq.mm PVC copper

wire with 14 SWG bare copper earth wire.(Actual nos. shall be decided at site).

EARTHING MATERIAL

Supply of 3.8M, 100mm dia. heavy G.I. Pipe earth electrode having 100 micron zinc coating

for earthing as per Technical Specification ‐ Electrical System (Doc. No. PC150/E/112/P‐II/Sec‐

6.0 & its attachments). The hot dip galvanizing (minimum Zinc coating of 610 gms/ sq. M as

per IS‐2629) shall be done after all fabrication. The electrodes shall be made from one piece

length of pipe

Installation, testing and commissioning of earth pits as per earthing layout drawings

(excluding supply of safe earth electrodes & accessories) including digging the earth upto

required depth, erecting safe earth electrode, disposal of surplus earth (as directed by

engineer‐in‐charge) and back filling of the pit as required including supply of erection

material providing necessary brick works and other civil works, fixing G.I. L‐shaped test links

and brackets, twisted piece and connecting to it earth electrodes and earth strips with all

labour and materials to complete installation work in all respect as per approved drawings,

specifications and directions of engineer‐in‐charge




11.5



11.6




12.

12.1 Te 4 INR 0.00 No Rupees Only

12.2 Te 4 INR 0.00 No Rupees Only

12.3 Te 0.1 INR 0.00 No Rupees Only

12.4 Te 0.1 INR 0.00 No Rupees Only

13.

13.1 M3 2 INR 0.00 No Rupees Only



Supply of G.I. Earth Bus (50mm x 12mm x 390mm), with 10 Nos earthing holes and as per

PDS: E 615 enclosed.

Installation and commissioning of hot dip galvanised earth bus bar of size 360 mm x 75 mm x

10 mm with 10 holes of 14 mm dia including all labour and materials to complete installation

in all respect as per approved drawings, specifications and directions of Owner’s Engineer‐in‐

charge.

Supply of hot dip galvanized (minimum Zinc coating of 610 gms / sq. M as per IS‐2629)

Earthing strip / earth wire of the following sizes :

75mm X10mm

50mm X 6mm

Installation, testing and commissioning of Hot dip galvanised G.I. earthing strip running on

O.H. cable trays / cable trays in underground cable trenches / buried under soil in already

excavated cable trenches of depth 600mm or supported by G.I. saddles & saddle bars as

mentioned below including interconnection between different earth pits, strip / cable for

connection to various equipments & system neutral, necessary hardware for connection and

interconnection between earth bus bars including all labour and miscellaneous materials to

make installations complete in all respect as per approved drawings, specifications,

instructions and directions of engineer‐in‐charge.

75mm X10mm

50mm X 6mm

Supply of GI Links for Earth Pit Connections

MS Structure

Supply of MS structurals in channels, angles, flats, plates, rods etc. conforming to IS: 226.

Fabrication and installation of MS frame supports and brackets for various equipment base

frame, miscellaneous electrical equipment support, made of channels, angles, flats etc. of

different sections including bolting, welding, riveting, supply of necessary anchor bolts and

grouting etc. including 2 coats of zinc rich anti‐rust epoxy primer and 2 finished coats of

epoxy paint including breaking wall, floor etc. and making good the same with all labour and

consumable materials to complete installation in all respect as per approved drawings ,

specifications and directions of Owner’s Engineer‐in‐charge

Supply of 8 mm thick MS Chequered plates.

Fabrication and Installation of 8mm thick chequered plate in flooring, steps, covers over

cable trenches in switch board room, painting with one coats of bitumen paint in the 50%

thinner with two coats of black bitumen paints including supply of all consumables and

paints.

MATERIAL & ACCESSORIES FOR DIRECTLY BURIED CABLES

Supply of Fine river sand, as required.

Supply of approved first class bricks of dimension 230mmx115mmx75mm

Excavation of soft soil and back filling of trenches for cables and earth strips etc. following

types of soil except rocks for a maximum depth of 1.25 m for cables / 0.6 mtr. for earth strips

including shoring, strutting, dewatering, consolidation and disposal of surplus earth upto100

m leads including all labour and materials to complete installation in all respect.





14.





15.

15.1

A. Set 1 INR 0.00 No Rupees Only

B. No. 1 INR 0.00 No Rupees Only

C. Nos. 2 INR 0.00 No Rupees Only

D. No. 1 INR 0.00 No Rupees Only

E. Nos. 2 INR 0.00 No Rupees Only

15.2




D. No. 1 INR 0.00 No Rupees Only

15.3




D. Set 2 INR 0.00 No Rupees Only

15.4



Back filling with excavated earth in trench including consolidating each deposited layer by

ramming, dressing etc.

Spreading of approved fine river sand in cable trenches up to a depth of 250 mm (100 mm

below the centre line of cable and 150 mm above cable the centre line of cable) including all

labour and materials to make the installation complete in all respect as per approved

drawings, specifications and directions of engineer‐in‐charge.

Spreading of approved first class bricks of dimension 230mmx115mmx75mm in cable

trenches for cable protection including all labour and materials to make installation complete

in all respect.

MISCELLANEOUS ITEMS

Supply of Cable route markers of Round shape made of MS of dia 200mm with suitable

engraving as of HT/ LT/ Control/ Data Cable jointed with angle of 30X30X5 mm grouted in

concrete of size 150mm x150mm x 500mm.

Grouting and Installation of Cable Route Marker

Supply, hanging, fixing, connecting of of 240V, 1‐Ph, 50Hz, 1400mm sweep high speed ceiling

fan with electronic regulator.

Supply, hanging, fixing, connecting of single phase 450 mm sweep heavy duty Industrial type

exhaust fan with self opening guards/ louvers. along with necessary brackets, all required

civil works, making good the walls after fixing the fans etc.

Item wise unit prices of following spares for two years operation and maintenance along

with recommended quantity shall be quoted :

Motor (For each rating)

Bearings housing (complete with End Shield) both Driving End and Non driving end

Cooling fan

Space heater

Terminal box

Grease nipple & Plug (if installed)Interlocking switch socket & plug

Switch of each rating

Fuse base of each rating

Fuse of each rating

Plug Top

Lighting Fixtures

LED Lighting fixtures (along with Driver) alongwith LED Lamp of each type

Terminal block of each type

Heat resistance toughened glass cover of each type

Allen keys of different sizes as applicable

Local Control Station

Trip – neutral – close switch

Auto Manual / Local ‐Remote switch


C. No. 1 INR 0.00 No Rupees Only

D. Nos. 10 INR 0.00 No Rupees Only

E. Sets 2 INR 0.00 No Rupees Only

F. Sets 2 INR 0.00 No Rupees Only

G. No. 1 INR 0.00 No Rupees Only

15.5


15.6




D. Nos. 2 INR 0.00 No Rupees Only

0.00 No Rupees Only

1 Cu. M 126700 INR 0.00 No Rupees Only

1.1 Cu. M 115600 INR 0.00 No Rupees Only


2





Ammeters of different ranges

Terminal block

Indicating Lamps of different type

Push Buttons of different typeComplete LCS of each type

Junction Box

Junction Box of each type

LSDB63 A TPN SFU

32 A DP MCB

32 A DP ELCB

16 A DP MCB

TOTAL AMOUNT FOR SCHEDULE OF RATES FOR ELECTRICAL SUPPLY & INSTALLATION

WORKS

PART D

SCHEDULE OF RATES FOR CIVIL WORKS

Earthwork in excavation in foundations of footings, columns, plinth beams, walls etc., to

the required levels and grades in both dry and wet conditions, including dressing of sides

and ramming of bottoms, getting out excavated earth with lift upto 1.5 M and disposal of

surplus excavated materials within a lead of 50 M including stacking, levelling and dressing

etc., complete as per direction of Engineer‐in‐Charge(E.I.C.) in all kinds of soils as defined in

IS: 1200 including providing temporary supports to all service lines such as overhead and

underground water, sewage and drain pipes, cables etc. and shoring and strutting

wherever necessary, complete in all respects as per direction of Engineer‐in‐Charge.

Same as Item No.1, but lift from 1.5 M to 3.0 M.

Same as Item No.1, but lift from 3 M to 4.5 M.

Earth work in excavation by mechanical means (hydraulic excavator) / manual means over

areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal

of excavated earth, lead upto 50 m and lift upto 1.5 m, disposed to be levelled and neatly

dressed.

Ordinary Rock

Hard rock (blasting probihited)

Filling with available excavated good earth (excluding rocks / boulders), as approved and

directed by Engineer‐in‐Charge, in trenches, plinth, under floors, sides of foundation etc., at

all depths in layers not exceeding 20 cms. in thickness including consolidating and dressing

each deposited layer by ramming and watering with lead upto 50 metres, complete in all

respects

Same as above with selected good earth brought from source approved by the Engineer ‐in‐

Charge ( Rate shall include Royalty, Taxes, Octoroi, etc., levied by the local authorities,

all transportation, loading and unloading, etc., and nothing extra will be paid on this

account).





8







9 Ton 500 INR 0.00 No Rupees Only


11 Sq.M 2550 INR 0.00 No Rupees Only






Providing and laying dry rubble stone soling in layers of 300 mm thick hand set in regular

lines, interstices being filled in wit small pieces of stones, thoroughly rammed, consolidated

and watered complete as directed and specified & rolling with 10 MT power roller.

Supplying and filling in plinth with sand under floors, including watering, ramming,

consolidating and dressing complete.

Providing and laying in position cement concrete of specified grade ‐ all work up to plinth

level, including the cost of centering, shuttering and finishing :‐ 1:2:4 (1 Cement : 2 coarse

sand (zone‐III) : 4 graded stone aggregate 40 mm nominal size).

Providing and laying in position reinforced cement concrete in foundations, plinth beams

etc. including the cost of centering, shuttering, finishing but excluding reinforcement

Design mix M20 grade concrete ‐ All work up to plinth level

Design mix M20 grade concrete ‐ All work above plinth level





Steel reinforrcement for R.C.C. work including straightening, cutting, bending, placing in

posision and binding all complete with hot rolled, cold twisted, weldable high yield deformed

CRSD (Corrosion Resistance Steel with Fe500D properties) rebar having Characteristic yield

strength 500N/mm²,in accordance with IS:1786.

Providing and constructing Brick work with non modular fly ash bricks conforming to

IS:12894, class designation 10 average compressive strength in in cement mortar 1 : 6 ( 1

cement: 6 coarse sand )inwalls, etc. at all depths, places and positions including raking out

joints, curing, scaffolding etc. complete excluding plastering and painting.

CEMENT PLASTER (IN COARSE SAND): 12 mm cement plaster of mix 1:6 (1 cement: 6 coarse

sand)

CEMENT PLASTER (IN COARSE SAND): 15 mm cement plaster on rough side of single or half

brick wall of mix 1:6 (1 cement: 6 coarse sand)

6mm thick cement plaster to ceiling of mix 1:3 (1 cement: 3 fine sand).

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to

prepare the surface even and smooth complete

Distempering with oil bound washable distemper of approved brand and to give an even

shade including water thinnable priming coat with cement primer.

Providing and laying in position at all heights cement concrete mix 1:2:4 (1 cement: 2

coarse sand : 4 graded stone aggregate) in panels of 2 metre square or as directed

and finished with floating coat of neat cement including providing cement slurry ( with

cement @ 2.2 kg/sq.m.), rounding of edges and glass strips but excluding the cost of nosing

of steps etc., complete :‐ 40 mm. thick with 20.0 mm nominal size stone aggregate



18

18.1 kg. 250 INR 0.00 No Rupees Only

18.2 kg. 120 INR 0.00 No Rupees Only

19 Sq.M. 25 INR 0.00 No Rupees Only


21 Each 10 INR 0.00 No Rupees Only

22

22.1 Each 10 INR 0.00 No Rupees Only

22.2 Each 10 INR 0.00 No Rupees Only

Making Plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand : 6

graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm

nominal size, well rammed and consolidated and grouted with fine sand, including necessary

excavation, levelling & dressing & finishing the top smooth.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with

extruded built up standard tubular sections/appropriate Z sections and other sections of

approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia

and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with

required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free,

straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium

snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per

architectural drawings and the directions of Engineer‐in‐charge. Powder coated aluminium

(minimum thickness of powder coating 50 micron)

For Fixed Portion ‐ Anodised aluminium (anodised transparent or dyed to required shade

according to IS: 1868, Minimum anodic coating of grade AC 15)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and

making provision for fixing of fittings wherever required including the cost of EPDM rubber /

neoprene gasket required including necessary fittings:‐ Anodised aluminium (anodised

transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of

grade AC 15).

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or

graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in

aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel

screws etc. complete as per architectural drawings and directions of engineerin‐charge‐Pre‐

laminated particle board with decorative lamination on one side and balancing lamination on

other side

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions

etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and

the directions of Engineer‐in‐charge. (Including aluminium snap beading)‐With float glass

panes of 4.0 mm thickness

Providing and fixing double action hydraulic floor spring of approved brand and manufacture

conforming to IS : 6315, having brand logo embossed on the body / plate with double spring

mechanism and door weight upto 125 kg, for doors, including cost of cutting floors,

embedding in floors as required and making good the same matching to the existing floor

finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide

plate etc. complete as per the direction of Engineer‐in‐charge‐With brass cover plate

minimum 1.25 mm thickness

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less

than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with

necessary screws etc. complete

150x10 mm

100x10 mm





26

26.1 R.M. 100 INR 0.00 No Rupees Only

26.2 R.M. 100 INR 0.00 No Rupees Only


28 m 1220 INR 0.00 No Rupees Only

29per 50 Kg

cement24880 INR 0.00 No Rupees Only


20 mm nominal outer dia pipes

Finishing walls with water proofing cement paint of required shade two or more coats

applied @ 3.84 kg/10 sqm including one coat of water thinnable cement primer of approved

brand.

Providing and Placing in position suitable PVC water stops conforming to IS: 12200 for

construction/ expansion joints between two RCC members and fixed to the before pouring

concrete etc. complete :reinforcement with binding wire ‐ Serrated with central bulb (225

mm wide, 8‐11 mm thick)

Extra for providing and mixing water proofing material in cement concrete work in doses by

weight of cement as per manufacturer's specification.

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of

handles (best make of approved quality) for aluminium doors including necessary cutting and

making good etc. complete.

Providing and laying in situ seven course water proofing treatment with APP (Atactic poly‐

propylene) modified Polymeric memberane over roof consisting of first coat of bitumen

primer @ 0.40 Kg per sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 Kg/sqm, which

shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd and 5th layers

of roofing membrane APP modified Polymeric membrane 1.5 mm thick of 2.25 Kg/sqm

weight consisting of five layers prefabricated with centre core as 20 micron HMHDPE film

sandwiched on both sides with polymeric mix and the polymeric mix is protected on both

side with 20 micron HMHDPE film. 7th, the top most layer shall be finished with brick tiles of

class designation 10 grouted with cement mortar 1:3 (1cement : 3 fine sand) mixed with 2%

integral water proofing compound by weight of cement over a 12 mm layer of cement mortar

1:3 (1 cement : 3 fine sand) and finished neat.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than

grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary

screws etc. complete ‐100mm

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not

less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with

nuts and screws etc. complete : a) 250 mm x 16 mm

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for

hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe

with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC

solvent cement and the cost of cutting chases and making good the same including testing of

joints complete as per direction of Engineer in Charge. Concealed work, including cutting

chases and making good the walls etc.

15 mm nominal outer dia pipes


Sq.M. 50 INR 0.00 No Rupees Only

32

per cm

depth per

100 m

290 INR 0.00 No Rupees Only


34per cm

depth per 164600 INR 0.00 No Rupees Only


Providing and laying integral cement based water proofing treatment including preparation

of surface as required for treatment of roofs, balconies, terraces etc consisting of following

operations:

(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water

proofing compound conforming to IS. 2645 and approved by Engineer‐in‐charge over the

RCCslab including adjoining walls upto 300 mm height including cleaning the surface before

treatment.

(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with

50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing

compound conforming to IS : 2645 and approved by Engineer‐in‐charge over 20 mm thick

layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing

compound conforming to IS : 2645 and approved by Engineer‐in‐charge to

required slope and treating similarly the adjoining walls upto 300 mm height including

rounding of junctions of walls and slabs.

(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/

sqm of cement admixed with water proofing compound conforming to IS : 2645 and

approved by Engineerin‐ charge.

(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4

coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved

by Engineerin‐ charge including laying glass fibre cloth of approved quality in top layer of

plaster and finally finishing the surface with trowel with neat cement slurry and making

pattern of 300x300 mm square 3 mm deep.

Providing and fixing in position 12mm thick bitumen impregnated fiber board conforming to

IS: 1838, including cost of primer, sealing compound Grade‐A in expansion joints.

Supply, Providing and laying 1.0 mm Smooth HDPE Geomembrane Liner conorming to Indian

code of practice to make the under layer of reservior impermeable as per design drawing and

as directed by EIC complete in all rsepects.

Providing and laying in position bitumen hot sealing compound for Expanation / Construction

joints etc. ‐ Using grade 'A' sealing compound.

Providing & fixing in R.C.C. work, Single Face sluice gate, Class‐1( Rising Type) of 1000 mm

square size, conforming to IS : 3042 (Figure 1‐B) along with hand wheels, spindles, guide

rails& all other fitting accessories required, complete as per drawing and directions of

Engineer‐in‐Charge

(e) The whole terrace so finished shall be flooded with water for a minimum period of two

weeks for curing and for final test.“All above operations to be done in order and as directed

and specified by the Engineer‐in‐Charge : ‐ With average thickness of 120 mm and minimum

thickness at khurra as 65 mm.

31


36 MT 15 INR 0.00 No Rupees Only

37 Te 75 INR 0.00 No Rupees Only

38 Kg. 700 INR 0.00 No Rupees Only

39 Kg. 500 INR 0.00 No Rupees Only

40 Sq.m 100 INR 0.00 No Rupees Only

41 Sq.m 50 INR 0.00 No Rupees Only

Supplying, fabricating and fixing in position M.S. holding down bolts assembly consisting

of bolts, heads, nuts, washers etc., and the like including embedding in cement

concrete/R.C.C. works as per approved drawings complete in all respects including one

coat of approved quality anti‐corrosive paint over a coat of approved quality primer.

Providing and fixing rolling shutters of approved make made of 80 mm wide MS laths and

interlocked together through their entire length and jointed together at the ends by end

locks, mounted on specially designed pipe shaft with bracket plates, guide channels and

arrangement for inside and outside locking with push ‐pull operation complete including cost

of wire spring and hood cover for the shutters and painting with synthetic enamel paint of

approved brand and manufacture of required colour to give an even shade ‐ new work with

two coats inculding a coat of approved steel primer and a coat of mordant solution with 38

gms of copper acetate in a litre of soft water.

Extra for providing mechanical device chain and crank operation for operating rolling

shutters.

Supplying, transporting, de‐rusting, fabricating, erecting, hoisting and fixing in position

with necessary welding and/or bolting with MS bolts conforming to property class 4.6 of IS:

1367 at all heights as per approved fabrication drawings of all types of structural steel work

in columns, portals, girders, lattice girders, beams, crane girders, M.S rails, monorails,

bracings, trusses, purlins, rafters, side runners, sag rods, hand railings, staircase stringers

and steps, walkway, toe‐plates, floor grids, sag rods with M.S. rounds, side walling,

conveyor gantries, trestle for pipe and cable racks, gusset plates, etc., either made of rolled

steel joists, channels, angles, tees, flats, plates or built up from plates and/or rolled

steel sections including necessary site and shop fasteners, complete in all respects as per

approved fabrication drawings, standards and direction of Engineer‐in‐Charge :‐ With

providing and applying primer coat, intermediate coats and finish coat after the preparation

of surfaces on structural steel work complete in all respects as per technical specifications

and direction of Engineer‐in‐Charge.

Providing and fixing M.S pipe hand railing (medium grade) conforming to IS‐1239 consisting

of top and middle horizontal rails of 40 mm dia. and 32 mm dia. nominal bore

respectively, 1050 mm high upright members of 40 mm dia. nominal bore at 1500 mm

maximum distance centre to centre of each member including all joints, bends , elbows,

and specials as required and upright members welded or bolted to structural steel work/toe

plates or welded to M.S. insert plates with M.S. lugs embedded in R.C.C. works, complete

in all respects and as per direction of Engineer‐in‐Charge :‐ Two coats of chlorinated rubber

based paint at dry film thickness of 40 microns per coat over two coats of high built zinc

phosphate primer compatible to chlorinated rubber based paint at dry film thickness of 25

microns per coat.

Supplying, fabricating, erecting and fixing in position to line and level all M.S Inserts such as

anchor plates, angles, tees, channels, plates with lugs, hooks, sleeves etc. embedding in

cement concrete /R.C.C. works at all levels including welding, bolting, drilling, cutting,

scaffolding, holding in position, providing one coat of approved anti‐corrosive paint and / or

Bituminous paint on exposed surfaces, etc. all complete in all respects and as per direction of

Engineer‐in‐Charge.(Templates if any required for fixing the inserts will not be paid for).


42 Te 3 INR 0.00 No Rupees Only


44 LS 1 INR 0.00 No Rupees Only

0.00 No Rupees Only

A 0.00

B

C 18% (Eighteen Percent)

D

E

F TOTAL GST AMOUNT (in Words)

0.00

No Rupees Only

TOTAL AMOUNT IN FIGURES ( A + E )

TOTAL AMOUNT IN WORDS ( A + E )

0.00

No Rupees Only

No Rupees Only

APPLICABLE GST (INCLUDING CESS/SURCHARGE, IF ANY )

BIDDER TO INDICATE APPLICABLE SAC/HSN CODE

TOTAL GST AMOUNT (in Figures)

GRAND TOTAL OF PART A, PART B, PART C & PART D (INR, In Words), Including all

Taxes, Duties & Cess, Excluding GST

Supplying , fabricating and erecting M.S entrance gates consisting of M.S pipes of medium

duty frame and M.S rods welded together including heavy duty fittings such as locking

arrangement and guide rail embedded in concrete as per drawing and rollersfor

smoothoperation all complete and painting as per technical specifications and as per

directions of Engineer‐in‐Charge. (All material supply is in contractor's scope)

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by

mechanical means, including loading, transporting, unloading to municipal approved

dumping ground or as approved by Engineer‐in‐charge, beyond 50 m initial lead, for all leads

including all lifts involved.

RELEVANT GEO‐TECHNICAL TESTS FOR SOIL INVESTIGATION

TOTAL AMOUNT FOR SCHEDULE OF RATES FOR CIVIL WORKS

GRAND TOTAL OF PART A, PART B, PART C & PART D (INR, In Figures), Including all

Taxes, Duties & Cess, Excluding GST

G


SECTION – VI-10.0 VENDOR LIST PLANTS: CONSTRUCTION OF...

Documents

Transcript of SECTION – VI-10.0 VENDOR LIST PLANTS: CONSTRUCTION OF...