Section 11 03-17-2014 NN Tail Swing D902 Kubota E-TVCS Tier 4 Diesel Engine Rubber Track Model,...

KUBOTAEXCAVATORS

WHOLEGOODS PRICE LIST EFFECTIVE MARCH 17, 2014

These pages are a complete revision of thissection of your price book.

All prices are effective March 17, 2014.

Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. 1-1

EQUIPMENT = 24.5%IMPLEMENTS = 15%PARTS = 8.5%

KUBOTAK Series K008-3T4

K008-3T4 Hydraulic Excavator

FEATURES ENGINE Rubber Tracks D722 Kubota E-TVCS Tier 4 Diesel Engine 2-Post Foldable ROPS 3 Cylinder, 4 Cycle Variable Width Track Frame 10.1 Net HP @ 2050 rpm Kubota 2 Hydraulic Pump Design 2 Gear Type Pumps OPERATIONAL DIMENSIONS Two Operating Pattern Selection System Max Digging Depth 5’ 8” Standard Front Dozer Blade Max Digging Radius @ Ground Level 9’ 11” 360 Degree Full Rotation Max Vertical Digging Depth 4’ 6” 55º Left And 60º Right Boom Swing Angle Max Dumping Height 6’ 8” 5.5 GPM Auxiliary Hydraulics Port Five Second Quick Preheat System DOZER BLADE DIMENSIONS Key Switch Stop System Width 28” / 34” Self Bleed Fuel System Height 7.9” Two Speed Travel Lift Above Ground 7.9” Drop Below Ground 7.1” BASIC UNIT K008T4, Rubber Tracks, 2-Post Foldable ROPS PERFORMANCE Digging Force @ Bucket (K9776) 2200 lbs. DIMENSIONS AND OPERATING WEIGHT Digging Force @ Dipper Arm 1010 lbs. K008T4 With K9776 Bucket Travel Speed 1.2 / 2.5 mph Overall Length 9’ 0” Climbing Ability 27% / 15 ° Overall Width 2’ 4” ~ 2’ 10” Ground Pressure 3.5 psi Overall Height 7’ 4” Lift Capacity 660 lbs. Operating Weight * 2200 lbs. Over End Ground Clearance 5.9” Blade Grounded 2 Ft. Load Point Height * Includes operator’s weight, 175 lbs. 6 Ft. Load Radius

Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. Page 11-5

KUBOTAK Series K008-3T4

ORDER CODEAPPROX. SHIP WT.

SUGGESTED LIST PRICE

PART 1

K008T4 2028 $21,740.00

With:

PART 2

K9775 36 $346.00

K9776 90 $419.00

K7759 36 $555.00

K7760 47 $564.00

K7768 55 $579.00

K7769 69 $645.00

PART 3

K7748 15 $287.00

KXB310Q 165 $5,630.00

K7761 99 $572.00

K7990 2.2 $575.00

K7773 5 $985.00

Description

K7802 50 $119.00

K7812 2.5 $20.00

PART 4K7787 154 $786.00

Required for KXB310Q installation on K008-3 & K008-3T4

For hydraulic breaker maintenance only. Requires hose assembly. Order 70003-00677 from parts.

Optional kit for use in close proximity with grass, brush, timber and similar material with potential for ignition. Requires K7812 Spark Arrestor Screen

Required for K7802 installation.

Rubber Tracks, 2-Post Foldable ROPS, Dozer Blade, Dipper Arm, and Counterweight

ROPS / OPG (Top Guard, Level I)

12 inch 0.63 cu. ft. H.D. Bucket (Bolt-on teeth)


KXB310Q Hydraulic Hammer Tool Information

Spade Tool (Transverse To Boom)77700-00406

Hydraulic Breaker BracketRequired for KXB310Q Pin-On configuration.

kit, 9.8' long. Order 70000-03824 from Parts

Accumulator Charge Kit

77700-00403

Spark Arrestor Muffler Kit

Spark Arrestor Screen

Part Nos.77700-0033877700-00320

ATTACHMENTS

and K7990 Hose Kit

Hydraulic Breaker, 200 ft. lbs. ratedIncludes manual, one moil point and one chisel point.

For K008-3 & K008-3T4 requires K7761 Bracket

DESCRIPTION

For K008 requires K7761 Bracket and a longer hose

Replacement 2-Post Foldable ROPS

Replacement Moil PointReplacement Chisel PointSpade Tool (Parallel To Boom)


Two Way Service Port Hydraulic KitThe K7748 converts the auxiliary hydraulics from one way to two way flow. Includes manual, hydraulic hoses, and fittings

10 inch 0.49 cu. ft. Bucket (Welded teeth)

14 inch 0.74 cu. ft. Bucket (Welded teeth)

BUCKETS


MODEL K008T4 BASIC UNIT

Excavator Basic Unit

Hydraulic Breaker Hose Kit


KUBOTAK Series U17VR1

U17VR1Zero Tail Swing Hydraulic Excavator

FEATURES ENGINEZero Tail Swing D902 Kubota E-TVCS Tier 4 Diesel Engine Rubber Track Model, Variable Track Gauge 3 Cylinder, 4 Cycle ROPS/OPG (Top Guard, Level I) 4-Post Canopy 15.2 Net HP @ 2300 rpm High Back Suspension Seat Kubota 3 Hydraulic Pump Design Operational Dimensions 1 Gear, 2 Variable Displacement Pumps Max Digging Depth 7’ 7” Hydraulic Joystick Controls With Wrist Rests Max Digging Radius @ Ground Level 12’ 7” Two Operating Pattern Selection System Max Vertical Digging Depth 6’ 3” Standard Front Dozer Blade with Extensions Max Dumping Height 8’ 0” 360 Degree Full Rotation 65 Degree Left, 58 Degree Right Boom Swing DOZER BLADE DIMENSIONS 7.3 Gpm Auxiliary Hydraulics Port Width 3’ 3” / 4’ 1” Five Second Quick Preheat System Height 10.3” Key Switch Stop System Lift Above Ground 11.0” Short Pitch Rubber Tracks Drop Below Ground 7.5” Self Bleed Fuel System Two Speed Travel PERFORMANCE Digging Force @ Bucket (K7970) 3417 lbs Basic Units Digging Force @ Dipper Arm 1918 lbs U17VR1, Rubber Tracks, 4-Post ROPS/OPG (Top Travel Speed (Low) 1.4 mph Guard, Level I) Travel Speed (High) 2.6 mph Climbing Ability 36% / 20° Dimensions and Operating Weight Lift Capacity 1,140 lbs U17VR1, Rubber Tracks, 4-Post ROPS/ OPG (Top Over End Guard, Level I) Blade Grounded Overall Length 11’ 7” 2.0 ft Load Point Height Overall Width 3’ 3” / 4’ 1” 8.0 ft Load radius Overall Height 7’ 8” Operating Weight 3814 lbs* Ground Clearance 5.9” * Includes operator’s weight, 175 lbs.





U17VR1 3527 $28,300.00

K7966 28 $772.00

K7970 80 $768.00

$29,840.00

18” 1.5 cu. ft. Trenching Bucket

Dipper armCounterweight

ATTACHMENTS:

Quick Coupler

Rubber Tracks4-Post ROPS/OPG (Top Guard, Level I) CanopyDozer Blade

STANDARD UNIT U17VR1 COMPLETE ORDER AND PRICE

BASIC UNIT:

EXCAVATOR WITH:

DESCRIPTION

HOW TO SELECT A U17VR1 EXCAVATOR(Sample Order Information Page)

Below is an example of a complete U17VR1 order. To submit your order, please select the Basic Unit Model that you desire from Part 1. Then select the attachments from Parts 2 and 3 needed to complete your order.

STEP 1)

Select from Part 1 the Basic Unit that fits your needs. For example, choose a U17VR1 and get: Base Model, rubber tracks, 4-post ROPS/OPG (Top Guard, Level I) canopy, dozer blade, dipper arm and counterweight.

STEP 2) Select from Parts 2 and 3 the attachments necessary to make the unit a complete machine. Choose buckets and quick couplers or hydraulic breaker.

(SAMPLE ORDER)


KUBOTAK Series U17VR1ORDER CODE

APPROX. SHIP WT.


PART 1

U17VR1 3527 $28,300.00

With:

PART 2

K7779A 70 $657.00

K7780A 78 $678.00

K7781 88 $748.00

K7785 95 $930.00

K7966 28 $772.00

K7967 50 $407.00

K7968 92 $618.00

K7969 70 $734.00

K7970 80 $768.00

K9607 12 $213.00

PART 3KXB360Q 247 $6,915.00

K7639 40 $583.00

K7754 54 $627.00

K7764 99 $673.00

K7773 5 $985.00

Description

K9919 20 $124.00

K9773 7 $323.00

Rubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I) Canopy, Dozer Blade, Dipper Arm, Counterweight

Canopy Work Light Kit

Travel Alarm Kit

Spade Tool (Parallel To Boom)Spade Tool (Transverse To Boom)

Replacement Moil PointReplacement Chisel Point

77700-0033977700-0032177700-0040477700-00407


Part Nos.

Emits an audible signal when traveling forward or reverse

HYDRAULIC BREAKER BRACKET

Required for KXB360Q Pin-On configuration

ACCUMULATOR CHARGE KIT

Required for hydraulic breaker maintenance only, one kit for servicing all breakers.


Required for KXB360Q Quick Attach configuration

Includes manual, one moil point and one chisel point.

HYDRAULIC BREAKER HOSE KIT

Required for all KXB360Q installations

Requires K7639 hose kit and a mount bracket (K7754 or K7764)

Set of two ear blanks. Converts buckets to quick coupler style. Modification to match bucket contour required.

ATTACHMENTSHYDRAULIC BREAKER, 300 ft. lbs. rated


DESCRIPTION

MODEL U17 BASIC UNITS

12 inch 1.0 cu. ft. Trenching Bucket


Bucket Hangers


Quick Coupler

Includes two mounting pins, 1 locking pin, and hardware.


16 inch 0.95 cu. ft. 2-Hole H. D. Bucket


QUICK ATTACH BUCKETS

BUCKETS

PIN-ON BUCKETS







PART 4

K9782 20 $1,442.00

K9943A 3 $78.00 RETRACTABLE SEAT BELT OPTION (3”)

REPLACEMENT 4-POST ROPS / OPG (Top Guard, Level I)


As required in some states for OSHA compliance.

DESCRIPTION

ALLIED ATTACHMENT CONTACTS

DESCRIPTION CONTACT

Earth Auger Model D450

McMillen 503 Gay Street Delhi, Iowa 52223 (563) 922-2981 Fax (563) 922-2700

Vibratory Compactor Model 300

Allied Construction Products, LLC 3900 Kelly Avenue Cleveland, OH 44114 Tel. (404) 435-6947, Fax: (216) 431-2601 Website: http://www.AlliedCP.com

Available from Parts 70000-01602 Spark Arrestor (Screen Type)


KUBOTAK Series KX018-4

KX018-4 Hydraulic Excavator

FEATURES ENGINERubber Tracks Model, Variable Track Gauge D902 Kubota E-TVCS Tier 4 Diesel Engine ROPS/OPG (Top Guard, Level I) 4-Post Canopy or 3 Cylinder, 4 Cycle Heated Cab 15.2 Net HP @ 2300 rpm Suspension Seat Kubota 4 Hydraulic Pump Design 2 Gear, 2 Variable Displacement Pumps Operational DimensionsHydraulic Joystick Controls With Wrist Rests Max Digging Depth 7’ 9.7” Two Operating Pattern Selection System Max Digging Radius @ Ground Level 12’ 8” Standard Front Dozer Blade Max Vertical Digging Depth 6’ 7.9” 360 Degree Full Rotation Max Dumping Height 7’ 9.7” 75 Degree Left, 60 Degree Right Boom Swing 7.4 Gpm Auxiliary Hydraulics Port DOZER BLADE DIMENSIONSFive Second Quick Preheat System Width 3’ 3” / 4’ 3.2” Key Switch Stop System Height 9.1” Short Pitch Rubber Tracks Lift Above Ground 9.1” Self-Bleed Fuel System Drop Below Ground 9.1” Auto-downshift Two Speed Travel System Two Speed Travel PERFORMANCEBasic Units Digging Force @ Bucket (K7970) 3594 lbs. KX018-4R1, Rubber Tracks, 4-Post ROPS/OPG (Top Digging Force @ Dipper Arm 1852 lbs. Guard Level I) Canopy, Dipper Arm, Counterweight Travel Speed (Low) 1.4 mph KX018-4R2, Rubber Tracks, ROPS/OPG (Top Guard Travel Speed (High) 2.6 mph Level I) Heated Cab, Dipper Arm, Counterweight Climbing Ability 27% / 15° Lift Capacity 910 lbs. • Over End Dimensions And Operating Weight • Blade Grounded KX018-4R1, Rubber Tracks, 4-Post ROPS/OPG (Top • 2.0 ft Load Point Height Guard, Level I) Canopy, Dipper Arm, Counterweight • 8.0 ft Load radius Overall Length 12’ 2.1” Overall Width 3’ 3” / 4’ 3.2” Overall Height 7’ 7.7” Operating Weight 3747 lbs.* Ground Clearance 6.3” * Includes operator’s weight, 175 lbs.





KX018-4R1 3747 $30,500.00

K7966 28 $772.00 K7970 80 $768.00

$32,040.00

Counterweight

ATTACHMENTS:

Quick Coupler18” 1.5 cu. ft. Trenching Bucket

Rubber Tracks4-Post ROPS/OPG (Top Guard, Level I) Canopy

BASIC UNIT:EXCAVATOR WITH:

STANDARD UNIT KX018-4R1 COMPLETE ORDER AND PRICE

DESCRIPTION

Dozer BladeDipper arm

HOW TO SELECT A KX018-4 EXCAVATOR(Sample Order Information Page)

Below is an example of a complete KX018-4 order. To submit your order, please select the Basic Unit that you desire from Part 1. Then select the attachments from Parts 2 and 3 needed to complete your order.

STEP 1)

Select from Part 1 the Basic Unit that fits your needs. For example, choose a KX018-4 and get: Base Model, rubber tracks, 4-post ROPS/OPG (Top Guard, Level I) canopy, dozer blade, dipper arm and counterweight.

STEP 2) Select from Parts 2 and 3 the attachments necessary to make the unit a complete machine. Choose buckets and quick couplers or hydraulic breaker.

(SAMPLE ORDER)





PART 1

KX018-4R1 3747 $30,500.00

With:

KX018-4R2 3967 $34,000.00

With:

PART 2

K7779A 70 $657.00

K7780A 78 $678.00

K7781 88 $748.00

K7785 95 $930.00

K7966 28 $772.00

K7967 50 $407.00

K7968 92 $618.00

K7969 70 $734.00

K7970 80 $768.00

K9607 12 $213.00

PART 3KXB360Q 247 $6,915.00

K7639 40 $583.00

K7754 54 $627.00

K7764 99 $673.00

K7773 5 $985.00

Description


Rubber Tracks, ROPS/OPG (Top Guard, Level I) Heated Cab, Dozer Blade, Dipper Arm, Counterweight

HYDRAULIC BREAKER, 300 ft. lbs. rated





Bucket Hangers

77700-00321



ATTACHMENTS

Spade Tool (Transverse To Boom)

Replacement Chisel Point

Includes manual, one moil point and one chisel point.

77700-00339

Quick CouplerIncludes two mounting pins, 1 locking pin, and hardware.

BUCKETS


77700-00407




MODEL KX018-4 BASIC UNITS


PIN-ON BUCKETS



Part Nos.

Spade Tool (Parallel To Boom)

Replacement Moil Point

77700-00404








DESCRIPTION






PART 3

K7420 2 $250.00

K7421 20 $202.00

K7424 7 $202.00

PART 4K7422 154 $1,300.00

K7423 390 $4,600.00

TBA TBA TBA

Level I) CANOPY

damaged factory mounted cabs. It does not include cabin The K7423 cab is configured as a replacement for

Travel Pedal Kit

electrical wiring, wiper motor, heater, or defroster. Refer to illustrated parts list to order these components.

REPLACEMENT 4-POST ROPS / OPG (Top Guard,

RETRACTABLE SEAT BELT OPTION (3")

ATTACHMENTS (Cont.)


Canopy Work Light Kit


Travel Alarm KitEmits an audible signal when traveling forward or reverse

DESCRIPTION

REPLACEMENT ROPS / OPG (Top Guard, Level I) CAB


DESCRIPTION CONTACT

Earth Auger Model D450, 1475, 1975




Available from Parts 70000-01602 Screen Type Spark Arrestor

TBA Block Heater

Prices and specifications subject to change without notice. F.O.B. KTC designated shipping point.Complete revision March 17, 2014. -14

KUBOTAK Series U25ST4

U25ST4Zero Tail Swing Hydraulic Excavator

FEATURES ENGINEZero Tail Swing D1105 Kubota E-TVCS T4 Diesel Engine Rubber Track Models 3 Cylinder, 4 Cycle ROPS/OPG (Top Guard, Level I) 4-Post Canopy 19.8 Net HP @ 2400 rpm Suspension Seat Kubota 3 Hydraulic Pump Design OPERATIONAL DIMENSIONS 1 Gear, 2 Variable Displacement Pumps Max Digging Depth 9’ 3” Hydraulic Joystick Controls With Wrist Rests Max Digging Radius @ Ground Level 15’ 4” Two Operating Pattern Selection System Max Vertical Digging Depth 6’ 5” Standard Front Dozer Blade Max Dumping Height 10’ 6” 360 Degree Full Rotation 75 Degree Left, 55 Degree Right Boom Swing DOZER BLADE DIMENSIONS 12.7 Gpm Auxiliary Hydraulics Port Width 59” Five Second Quick Preheat System Height 11.8” Key Switch Stop System Lift Above Ground 14” Half Pitch Rubber Tracks Drop Below Ground 13” Self Bleed Fuel System Two Speed Travel PERFORMANCE Digging Force @ Bucket (K7978) 5765 lbs. BASIC UNITS Digging Force @ Dipper Arm 2745 lbs. U25R1T4, Rubber Tracks, 4-Post ROPS/OPG (Top Travel Speed (Low) 1.6 mph Guard, Level I) Travel Speed (High) 2.9 mph Climbing Ability 36%/ 20° DIMENSIONS AND OPERATING WEIGHT Lift Capacity 2,050 lbs. U25R1T4, Rubber Tracks, 4-Post ROPS/OPG (Top Over Front Guard, Level I) Blade Grounded Overall Length 13’ 7” 2.0 ft. Load Point Height Overall Width 4’ 11” 8.0 ft. Load radius Overall Height 7’ 11” Operating Weight* 5,625 lbs. Ground Clearance 11.2” * Includes operator’s weight, 175 lbs.





U25R1T4 5357 $34,590.00

With:

K7974 39 $833.00

K7978 155 $1,040.00

$36,463.00


STANDARD UNIT U25R1T4 COMPLETE ORDER AND PRICE

Quick Coupler



ATTACHMENTS:

DESCRIPTION

Rubber Tracks4-Post ROPS/OPG (Top Guard, Level I) CanopyDozer Blade

BASIC UNIT:

HOW TO SELECT A U25ST4 EXCAVATOR(Sample Order Information Page)

Below are examples of a complete U25ST4 order. To submit your order, please select the Basic Unit Model that you desire from Part 1. Then select the attachments from Parts 2 and 3 needed to complete your order.

STEP 1)

Select from Part 1 the Basic Unit that fits your needs. For example, choose a U25R1T4 and get: Base Model, rubber tracks, 4-post ROPS/ OPG (Top Guard, Level I) canopy, dozer blade, dipper arm and counterweight.

STEP 2) Select from Parts 2 and 3 the attachments necessary to make the unit a complete machine. Choose buckets and quick couplers, thumb or hydraulic breaker.

(SAMPLE ORDER)





PART 1

U25R1T4 5357 $34,590.00 With:

PART 2

K7788 130 $930.00

K7789 150 $988.00

K7790 164 $1,005.00

K7791 193 $1,073.00

K7974 39 $833.00

K9781 24 $251.00

K7975 110 $709.00

K7976 135 $820.00

K7977 150 $932.00

K7978 155 $1,040.00

K7979 180 $1,151.00

PART 3K7912 122 $2,200.00

KXB460Q 350 $8,450.00


12 inch 1.44 cu. ft. 3-Hole H.D. BUCKET

Set of 2 bucket ear blanks. Converts buckets to

QUICK COUPLER


Curl hole and power hole built into quick coupler.

Includes manual, one moil point, and one chisel point.

ATTACHMENTS

The K7978 bucket has four teeth. The K7912 Thumb tines contact the end of the teeth and do not mesh between the teeth.



HYDRAULIC THUMB KIT


BUCKET HANGERS

BUCKETS

PIN-ON BUCKETS (Order Attaching Pins from Parts)


Includes two mounting pins, 1 locking pin, and hardware.

Rubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I) Canopy,Dozer Blade, Dipper Arm, Counterweight


K7974 Quick Coupler required.




DESCRIPTION

MODEL U25ST4 BASIC UNITS

quick coupler style. Modification to match bucket contour required.







PART 3

K7774 16 $645.00

K7755 54 $696.00

K7765 35 $677.00

K7773 5 $985.00

Description

Spade Tool (Transverse To Boom)

K9919 20 $124.00

K9962 370 $3,330.00

K9967 7 $293.00

PART 4 ROPS / OPG (Top Guard, Level I)K7847 154 $1,352.00

K9943A 3 $78.00

Part Nos.KXB460Q Hydraulic Hammer Tool Information

77700-00405


HYDRAULIC BREAKER HOSE KITRequired for all KXB460Q installations

HYDRAULIC BREAKER MOUNT BRACKETRequired for KXB460Q Quick Attach configuration

HYDRAULIC BREAKER MOUNT BRACKET

77700-00408


Replacement Moil Point

Spade Tool (Parallel To Boom)

CANOPY WORK LIGHT KIT

STEEL CRAWLER KIT


77700-0034077700-00322

TRAVEL ALARM KIT

DESCRIPTION

Convert tracks from rubber to steel


CANOPY


ATTACHMENTS (Cont.)

Replacement Chisel Point

RETRACTABLE SEAT BELT OPTION (3”)

REPLACEMENT 4-POST ROPS / OPG (Top Guard, Level I)

ALLIED ATTACHMENT CONTACTS DESCRIPTION CONTACT

Earth Auger Model D450, 1475, 1975




Available from Parts 70000-73274 Block Heater Kit

70000-01602 Spark Arrestor (Screen Type)


KUBOTAK Series KX71-3S4

KX71-3S4Hydraulic Excavator

FEATURES ENGINERubber or Steel Track Models V1505 Kubota E-TVCS Tier 4 Diesel Engine ROPS/OPG (Top Guard, Level I) 4-Post Canopy or 4 Cylinder, 4 Cycle Heated Cab 23.1 Net HP @ 2250 rpmSuspension Seat Kubota 3 Hydraulic Pump Design OPERATIONAL DIMENSIONS 1 Gear, 2 Variable Displacement Pumps Max Digging Depth 9’ 9” Hydraulic Joystick Controls Max Digging Radius @ Ground Level 16’ Two Operating Pattern Selection System Max Vertical Digging Depth 6’ 5” Standard Front Dozer Blade Max Dumping Height 10’ 5” 360 Degree Full Rotation 80 Degree Left, 60 Degree Right Boom Swing DOZER BLADE DIMENSIONS 13.1 gpm Adjustable Auxiliary Hydraulics Port Width 59” Five Second Quick Preheat System Height 12” Key Switch Stop System Lift Above Ground 13” Half Pitch Rubber Tracks Drop Below Ground 12” Self Bleed Fuel System Two Speed Travel PERFORMANCE Thumb Bracket & Relief Valves Digging Force @ Bucket (K7875) 6350 lbs. Swivel Negative Brake Digging Force @ Dipper Arm 3285 lbs. Travel Speed (Low) 1.8 mph BASIC UNITS Travel Speed (High) 2.9 mph KX71-3S4R1, Rubber Tracks, 4-Post ROPS/OPG Climbing Ability 36%/ 20° (Top Guard, Level I) Canopy Lift Capacity 1,760 lbs.KX71-3S4R2, Rubber Tracks, ROPS/OPG (Top Over Front Guard, Level I) Cab Blade Grounded KX71-3S4S1, Steel Tracks, 4-Post ROPS/OPG (Top 2.0 ft. Load Point Height Guard, Level I) Canopy 8.0 ft. Load radius KX71-3S4S2, Steel Tracks, ROPS/OPG (Top Guard, Level I) Cab DIMENSIONS AND OPERATING WEIGHT KX71-3S4R1, Rubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I) Canopy Overall Length 14’ 11” Overall Width 4’ 11” Overall Height 8’ Operating Weight* 6305 lbs. Ground Clearance 11” KX71-3S4R2, Rubber Tracks, ROPS/OPG (Top Guard, Level I) Heated Cab

Overall Length 14’ 11” Overall Width 4’ 11” Overall Height 7’ 11” Operating Weight* 6550 lbs.Ground Clearance 11” * Includes operator’s weight, 175 lbs.





KX71-3S4R1 Excavator Basic Unit 6305 $38,300.00 With: Rubber Tracks

Dozer BladeDipper armCounterweight

K7870 Quick Coupler 72 $904.00 K7875 240 $1,269.00

$40,473.00

KX71-3S4R2 Excavator Basic Unit 6550 $42,560.00 With: Rubber Tracks

ROPS/OPG (Top Guard, Level I) CabDozer BladeDipper armCounterweight

K7862A 225 $1,205.00 $43,765.00

ATTACHMENTS:

4-Post ROPS/OPG (Top Guard, Level I) Canopy

ATTACHMENTS:

DESCRIPTION


STANDARD UNIT KX71-3S4R1 COMPLETE ORDER AND PRICEBASIC UNIT:

BASIC UNIT:STANDARD UNIT KX71-3S4R2 COMPLETE ORDER AND PRICE

24” 3.73 cu. ft. 3-Hole H. D. Bucket

HOW TO SELECT A KX71-3S4 EXCAVATOR(Sample Order Information Page)

Below are examples of a complete KX71-3S4 order. To submit your order, please select the Basic Unit Model that you desire from Part 1. Then select the attachments from Parts 2 and 3 needed to complete your order.

STEP 1)

Select from Part 1 the Basic Unit that fits your needs. For example, choose a KX71-3S4 and get: Base Model, rubber tracks, 4-post ROPS/OPG (Top Guard, Level I) canopy, dozer blade, dipper arm and counterweight.


(SAMPLE ORDER)





PART 1

KX71-3S4R1 6305 $38,300.00

With:

KX71-3S4R2 6550 $42,560.00

With:

KX71-3S4S1 6525 $38,300.00

With:

KX71-3S4S2 6770 $42,560.00

With:

PART 2 BUCKETS

K7792A 200 $1,000.00

K7793 214 $1,075.00

K7794 223 $1,123.00

K7796 260 $1,238.00

K7870 72 $904.00

K9807 88 $326.00

K7872 160 $964.00

K7873 185 $1,005.00

K7874 190 $1,070.00

K7875 240 $1,269.00

K7473 305 $4,336.00

K7474 41 $150.00

K7458 245 $1,360.00

Set of 2 bucket ear blanks. Converts buckets to

Includes hoses and fittings. Tilts 45° each direction.

12 inch 2.60 cu. ft. 3-Hole Bucket



Thumb tines contact the end of the teeth and







The K7874 bucket has four teeth. The K7902

BOLT ON CUTTING EDGE

quick coupler style. Modification to match


36 inch Grading Blade

Curl hole and power hole built into quick coupler. Includes two mounting pins, 1 locking pin and hardware.

BUCKET HANGERS

do not mesh between the teeth.


36 inch 3.0 cu. ft. TILT GRADING BUCKET

bucket contour required.

For K7473 36” grading bucket


PIN-ON BUCKETS (Order attaching pins from Parts)

DESCRIPTION

MODEL KX71-3S4 BASIC UNITS


QUICK COUPLER

Steel Tracks, ROPS/OPG (Top Guard, Level I) Cab, Dozer Blade, Dipper Arm, Counterweight


Rubber Tracks, ROPS/OPG (Top Guard, Level I) Cab, Dozer Blade, Dipper Arm, Counterweight

Steel Tracks, 4-Post ROPS/OPG (Top Guard, Level I) Canopy, Dozer Blade, Dipper Arm, Counterweight





PART 3K7902 190 $2,558.00

KXB460Q 350 $8,450.00

K7774 16 $645.00

K7758 54 $754.00

K7766 35 $793.00

K7773 5 $985.00

Description

K7461 300 $1,878.00

K9919 20 $124.00

K9736 370 $2,847.00

K9967 7 $293.00

K9989 20 $370.00

K9988 2 $66.00


Includes manual, one moil point and one chisel point. Requires a K7774 hose kit, and a mount bracket (K7758 or K7766)


Part Nos.


SPARK ARRESTOR MUFFLER KITOptional kit for use in close proximity with grass, brush, timber and similar material with potential for ignition. Requires K9988 Heat Insulation Kit.

HEAT INSULATION KIT

TRAVEL ALARM KITEmits an audible signal when traveling forward or reverse

77700-00408


24” EXCAVATING RAKE, QUICK ATTACH

Spade Tool (Parallel To Boom)Spade Tool (Transverse To Boom)

77700-0034077700-00322

Required for all KXB460Q installationsHYDRAULIC BREAKER HOSE KIT


Replacement Moil PointReplacement Chisel Point


BREAKER MOUNT BRACKET

77700-00405

STEEL CRAWLER KITConvert tracks from rubber to steel


ATTACHMENTS

DESCRIPTION


HYDRAULIC THUMB KIT







PART 4K7890 180 $1,195.00

K7899 400 $5,807.00

K9943A 3 $78.00

K7856C 8 $470.00

CANOPY

RADIO OPTIONCompatible with cab models only. Kit includes AM/FM/WB radio, MP3 port, mounting kit, speakers, and antenna

RETRACTABLE SEAT BELT OPTION (3”)As required in some states for OSHA compliance.

damaged factory mounted cabs. It does not include cabin electrical wiring, wiper motor, heater, or defroster. Refer to illustrated parts list to order these components.

DESCRIPTION


The K7899 cab is configured as a replacement for REPLACEMENT ROPS / OPG (Top Guard, Level I) CAB

REPLACEMENT 4-POST ROPS/OPG (Top Guard, Level I)

ALLIED ATTACHMENT CONTACTS DESCRIPTION CONTACT:

Earth Auger Model 975, 1475, 1975

McMillen 503 Gay Street Delhi, IA 52223 (800) 922-2981 Fax (563) 922-2082

Vibratory Compactor Model 500B

Allied Construction Products, LLC 3900 Kelly Avenue Cleveland, OH 44114 Tel. (404) 435-6947, Fax (216) 431-2601 Website: http://www.AlliedCP.com

Available from Parts

70000-73274 Block Heater Kit


KUBOTA

This page intentionally left blank.



KX91-3S2Hydraulic Excavator

FEATURES DIMENSIONS AND OPERATING WEIGHT

Rubber Or Steel Track Models KX91R1S2, Rubber Tracks, 4-Post ROPS/ OPG (Top ROPS/OPG (Top Guard, Level I) 4-Post Canopy Guard, Level I) Canopy or Cab Overall Length 15’ 7” Suspension Seat Overall Width 5’ 1” Kubota 3 Hydraulic Pump Design Overall Height 8’ 1 Gear, 2 Variable Displacement Pumps Operating Weight* 7110 lbs. Hydraulic Joystick Controls Ground Clearance 11.6” Accumulator Two Operating Pattern Selection System KX91R2S2, Rubber Tracks, ROPS/ OPG (Top Guard, Standard Front Dozer Blade Level I) Heated Cab Float Angle Blade Option Overall Length 15’ 7” 360 Degree Full Rotation Overall Width 5’ 1” 80 Degree Left, 50 Degree Right Boom Swing Overall Height 8’ 10.9 gpm Adjustable Auxiliary Hydraulics Port Operating Weight* 7330 lbs. Five Second Quick Preheat System Ground Clearance 11.6” Key Switch Stop System Half Pitch Rubber Tracks ENGINE Self-Bleed Fuel System D1703-M Kubota E-TVCS Interim Tier 4 Diesel Engine Two Speed Travel 2013 Production Using TPEM Auto Idler 3 Cylinder, 4 Cycle Travel Negative Brake 28.3 Net HP @ 2250 rpm Thumb Bracket & Relief Valves Third Line OPERATIONAL DIMENSIONS Swivel Negative Brake Max Digging Depth 10’ 5” Max Digging Radius @ Ground Level 16’ 10” BASIC UNITS Max Vertical Digging Depth 7’ 10” KX91R1S2, Rubber Tracks, 4-Post ROPS/OPG (Top Max Dumping Height 11’ 7” Guard, Level I) Canopy KX91R1AS2, Rubber Tracks, 4-Post ROPS/OPG DOZER BLADE DIMENSIONS (Top Guard, Level I) Canopy, Angle Dozer Blade Width 61.0” KX91R1AES2, Rubber Tracks, 4-Post ROPS/OPG Height 13.2” (Top Guard, Level I) Canopy, Extendible Dipper Lift Above Ground 14.6” Arm, Angle Dozer Blade Drop Below Ground 14.6” KX91R2S2, Rubber Tracks, ROPS/OPG (Top Guard, Level I) Cab PERFORMANCE KX91R3S2, Rubber Tracks, Air Conditioned Digging Force @ Bucket (K7875) 8059 lbs. ROPS/OPG (Top Guard, Level I) Cab Digging Force @ Dipper Arm 3592 lbs. KX91R2AS2, Rubber Tracks, ROPS/OPG (Top Travel Speed (Low) 1.9 mph Guard, Level I) Cab, Angle Dozer Blade Travel Speed (High) 2.9 mph KX91R3AS2, Rubber Tracks, Air Conditioned ROPS/ Climbing Ability 36% / 20° OPG (Top Guard, Level I) Cab, Angle Dozer Blade Lift Capacity 2,950 lbs. KX91S1S2, Steel Tracks, 4-Post ROPS/OPG (Top • Over Front Guard, Level I) Canopy • Blade Grounded KX91S3S2, Steel Tracks, Air Conditioned ROPS/ • 2.0 ft. Load Point Height OPG (Top Guard, Level I) Cab • 8.0 ft. Load radius





KX91R1AS2 Excavator Basic Unit 7,140 $46,410.00 With: Rubber Tracks

Angle Dozer BladeDipper ArmCounterweight

K7862A 225 $1,205.00 $47,615.00

KX91R2S2 Excavator Basic Unit 6,930 $47,770.00 With: Rubber Tracks

Dozer BladeDipper ArmCounterweight

K7870 Quick Coupler 72 $904.00 K7875 240 $1,269.00

$49,943.00


ROPS/OPG (Top Guard, Level I) Cab

24” 3.73 cu. ft. 3-Hole H. D. BucketATTACHMENTS:


ATTACHMENTS:

STANDARD UNIT KX91R2S2 COMPLETE ORDER AND PRICEBASIC UNIT:

STANDARD UNIT KX91R1AS2 COMPLETE ORDER AND PRICEBASIC UNIT:

DESCRIPTION

HOW TO SELECT A KX91-3S2 EXCAVATOR(Sample Order Information Page)

Below are examples of a complete KX91-3S2 order. To submit your order, please select the Basic Unit Model that you desire from Part 1. Then select the attachments from Parts 2 and 3 needed to complete your order.

STEP 1)

Select from Part 1 the Basic Unit that fits your needs. For example, choose a KX91R1AS2 and get: Base Model, rubber tracks, 4-post ROPS/OPG (Top Guard, Level I) canopy, angle dozer blade, dipper arm and counterweight.


(SAMPLE ORDER)


KUBOTAK Series KX91-3S2ORDER CODE

APPROX. SHIP WT.


PART 1

KX91R1S2 6,710 $43,660.00

With:

KX91R1AS2 7,140 $46,410.00

With:

KX91R1AES2 7,635 $49,600.00

With:

The widest trenching bucket approved for use with the KX91R1AES2 is 16” (K7793 or K7873). Thumbs and hydraulic breakers are not

KX91R2S2 6,930 $47,770.00

With:

KX91R3S2 6,930 $50,860.00

With:

KX91R2AS2 7,360 $50,520.00

With:

KX91R3AS2 7,360 $53,610.00

With:

KX91S1S2 6,897 $43,660.00

With:

KX91S3S2 7,150 $50,860.00

With:

PART 2

K7792A 200 $1,000.00

K7793 214 $1,075.00

K7794 223 $1,123.00

K7796 260 $1,238.00

K7870 72 $904.00

K9807 88 $326.00


Steel Tracks, 4-Post ROPS/OPG (Top Guard, Level I) Canopy,


Steel Tracks, Air Conditioned ROPS/OPG (Top Guard, Level I)

BUCKETS


Dozer Blade, Dipper Arm, Counterweight

coupler style. Modification to match bucket contour required.

Cab, Dozer Blade, Dipper Arm, Counterweight


Includes two mounting pins, 1 locking pin and hardware.



BUCKET HANGERSSet of 2 bucket ear blanks. Converts buckets to quick



QUICK COUPLERCurl hole and power hole built into quick coupler.


Rubber Tracks, Air Conditioned ROPS/OPG (Top Guard,


I) Cab, Angle Dozer Blade, Dipper Arm, Counterweight

Level I) Cab, Dozer Blade, Dipper Arm, Counterweight

Angle Dozer Blade, Dipper Arm, Counterweight


Angle Dozer Blade, Dipper Arm, Counterweight


Rubber Tracks, ROPS/OPG (Top Guard, Level I) Cab,

Rubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I) Canopy, Angle Dozer Blade, Extendible Dipper Arm, Counterweight

approved for use with the extendible arm.


Dozer Blade, Dipper Arm, Counterweight


Rubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I) Canopy,

Dozer Blade, Dipper Arm, CounterweightRubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I) Canopy,

DESCRIPTION

MODEL KX91-3S2 BASIC UNITS


Rubber Tracks, ROPS/OPG (Top Guard, Level I) Cab,

Rubber Tracks, Air Conditioned ROPS/OPG (Top Guard, Level



APPROX. SHIP WT.


PART 2 BUCKETS (Cont.)K7872 160 $964.00

K7873 185 $1,005.00

K7874 190 $1,070.00

K7875 240 $1,269.00

K7473 305 $4,336.00

K7474 41 $150.00

K7458 245 $1,360.00

PART 3 ATTACHMENTSK7902 190 $2,558.00

KXB460Q 350 $8,450.00

K7774 16 $645.00

K7758 54 $754.00

K7773 5 $985.00

K7461 300 $1,878.00

K9919 20 $124.00

K9928 370 $2,645.00

K9774 7 $280.00

K9939 50 $505.00

K9959A 2.2 $31.00


Optional kit for use in close proximity with grass, brush, timber and similar cellulose material with potential for ignition. Requires K9959A Heat Insulation Kit.


SPARK ARRESTOR MUFFLER KIT


Not approved for use with extendible arm.




Convert tracks from rubber to steel

Required for KXB460Q installations


Includes manual, one moil point and one chisel point. Requires a K7774 hose kit, and a K7758 mount bracket


36" Grading Blade

HYDRAULIC THUMB KITK7870 Quick Coupler required



DESCRIPTION

Includes hoses and fittings. Tilts 45° each direction






24 INCH EXCAVATING RAKE, QUICK ATTACH

HEAT INSULATION KIT

TRAVEL ALARM KIT



STEEL CRAWLER KIT



APPROX. SHIP WT.


PART 4

K7892 165 $1,077.00

K7893 463 $5,807.00

K9946 4 $124.00

K7856C 8 $470.00

radio, MP3 port, mounting kit, speakers, and antenna

DESCRIPTION CONTACT:McMillen


Compatible with cab models only. Kit includes AM/FM/WB


Delhi, IA 52223

Website: http://www.AlliedCP.com

503 Gay Street

(800) 922-2981 Fax (563) 922-2082

Tel. (404) 435-6947, Fax (216) 431-2601

3900 Kelly AvenueCleveland, OH 44114

Allied Construction Products, LLC

Model 975, 1475, 1975Earth Auger

DESCRIPTION

RADIO OPTION

REPLACEMENT 4-POST ROPS / OPG (Top Guard, Level I) CANOPY


The K7893 cab is configured as a replacement for damaged factory mounted cabs. It does not include cabin electrical wiring, wiper motor, heater, or defroster. Refer to illustrated parts list to order these components.




Model 500BVibratory Compactor



KUBOTA



KUBOTAK Series U35-4

U35-4Tight Tail Swing Hydraulic Excavator

FEATURES ENGINETight Tail Swing D1703-M Kubota E-TVCS Tier 4 Diesel Engine Auto Idler 3 Cylinder, 4 Cycle Rubber Or Steel Track Models 23.9 Net HP @ 2200 rpm ROPS/OPG (Top Guard, Level I) 4-Post Canopy or Air Conditioned Cab OPERATIONAL DIMENSIONSSuspension Seat Max Digging Depth 9’ 8.9” Kubota 3 Hydraulic Pump Design Max Digging Radius @ Ground Level 16’ 11.3” 1 Gear, 2 Variable Displacement Pumps Max Vertical Digging Depth 6’ 7.3” All Controls Hydraulic Pilot Controls Max Dumping Height 11’ 0.7” Accumulator Two Operating Pattern Selection System STANDARD DOZER BLADE DIMENSIONS Digital Control Pane Width 67” Attachment Flow Presets, Service Alerts Height 13.5” Standard Front Dozer Blade with Float Lift Above Ground 14.65” Optional Float Angle Blade w/ Bolt-on Cutting Edge Drop Below Ground 14.53” 360 Degree Full Rotation 71 Degree Left, 45 Degree Right Boom Swing PERFORMANCE 15.8 gpm Adjustable Auxiliary Hydraulics Port Digging Force @ Bucket (K7875) 7924 lbs. Auxiliary Hydraulics Diverter Valve Digging Force @ Dipper Arm 4451 lbs. Thumb Bracket & Relief Valves Travel Speed (Low) 1.9 mph Five Second Quick Preheat System Travel Speed (High) 2.9 mph Key Switch Stop System Climbing Ability 58% / 30° Half Pitch Rubber Tracks Lift Capacity 3,230 lbs. Self-Bleed Fuel System • Over Front Auto-Downshift Two Speed Travel System • Blade Grounded Swivel Negative Brake • 2.0 ft. Load Point Height Travel Negative Brake • 8.0 ft. Load radius Third Line BASIC UNITS U35-4R1 Rubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I) U35-4R1A Rubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I), Angle Dozer Blade U35-4R3 Rubber Tracks, Air Conditioned, ROPS/ OPG (Top Guard, Level I) Cab U35-4R3A Rubber Tracks, Air Conditioned ROPS/ OPG (Top Guard, Level I) Cab, Angle Dozer Blade DIMENSIONS AND OPERATING WEIGHT U35R1, Rubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I) Overall Length 15’ 7” Overall Width 5’ 7” Overall Height 8’ 1.2” Operating Weight* 8129 lbs. Ground Clearance 11.34” U35R2S2, Rubber Tracks, Air Conditioned, ROPS/OPG (Top Guard, Level I) Cab Overall Length 15’ 7” Overall Width 5’ 7” Overall Height 8’ 1.2” Operating Weight* 8451lbs. Ground Clearance 11.34” * Includes operator’s weight, 175 lbs.





U35-4R1A Excavator Basic Unit 8,478 $48,700.00 With: Rubber Tracks

Angle Dozer BladeDipper armCounterweight

K7862A 225 $1,205.00 $49,905.00

U35-4R3 Excavator Basic Unit 8,451 $52,900.00 With: Rubber Tracks

Dozer BladeDipper armCounterweight

K7870 Quick Coupler 72 $904.00 K7875 240 $1,269.00

$55,073.00

Air Conditioned ROPS/OPG (Top Guard, Level I) Cab


BASIC UNIT:

ATTACHMENTS:24” 3.73 cu. ft. 3-Hole H. D. Bucket

ATTACHMENTS:


DESCRIPTION

STANDARD UNIT U35-4R3 COMPLETE ORDER AND PRICE

BASIC UNIT:STANDARD UNIT U35-4R1A COMPLETE ORDER AND PRICE

HOW TO SELECT A U35-4 EXCAVATOR(Sample Order Information Page)

Below are examples of a complete U35-4 order. To submit your order, please select the Basic Unit Model that you desire from Part 1. Then select the attachments from Parts 2 and 3 needed to complete your order.

STEP 1) Select from Part 1 the Basic Unit that fits your needs. For example, choose a U35-4R1A and get: Base Model, rubber tracks, 4-post ROPS/OPG (Top Guard, Level I) canopy, angle dozer blade, dipper arm and counterweight.


(SAMPLE ORDER)


KUBOTAK Series U35-4ORDER CODE

APPROX. SHIP WT.


PART 1U35-4R1 8,129 $45,900.00 With:

U35-4R1A 8,478 $48,700.00 With:

U35-4R3 8,451 $52,900.00 With:

U35-4R3A 8,800 $55,700.00 With:

PART 2 BUCKETS

K7792A 200 $1,000.00 K7793 214 $1,075.00 K7794 223 $1,123.00 K7796 260 $1,238.00

K7870 QUICK COUPLER 72 $904.00

K9807 88 $326.00

K7872 160 $964.00

K7873 185 $1,005.00

K7874 190 $1,070.00

K7875 240 $1,269.00

K7473 305 $4,336.00

K7474 41 $150.00

K7458 245 $1,360.00

BUCKET HANGERS

16 inch 2.80 cu. ft. 3-Hole Bucket18 inch 3.20 cu. ft. 3-Hole Bucket24 inch 4.50 cu. ft. 3-Hole Bucket

Rubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I)Canopy, Angle Dozer Blade, Dipper Arm, Counterweight


Excavator Basic UnitRubber Tracks, Air Conditioned ROPS/OPG (Top Guard,

36 inch Grading Blade






DESCRIPTION

Rubber Tracks, Air Conditioned ROPS/OPG (Top Guard, Level I) Cab, Angle Dozer Blade, Dipper Arm, Counterweight


Canopy, Dozer Blade, Dipper Arm, Counterweight,





Curl hole and power hole built into quick coupler. Includes two mounting pins, 1 locking pin and hardware.



Set of 2 bucket ear blanks. Converts buckets to quick coupler style. Modification to match bucket contour required.



MODEL U35-4 BASIC UNITSExcavator Basic UnitRubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I)



APPROX. SHIP WT.


PART 3 ATTACHMENTS

K7910 190 $2,558.00

KXB460Q 350 $8,450.00

K7774 16 $645.00

K7758 54 $754.00

K7773 5 $985.00

`

K7461 300 $1,878.00

K7940 6 $135.00

K9784 TRAVEL ALARM KIT 7 $280.00

TBA TBA TBA

TBA HEAT INSULATION KIT TBA TBA

PART 4

K9786 165 $1,550.00

K9787 390 $6,600.00

K7479 4 $280.00

K9946 3 $124.00

K7942A RADIO OPTION 8 $248.00

DESCRIPTION CONTACT:McMillen

Earth Auger 503 Gay StreetModel 975, 1475, 1975 Delhi, IA 52223

Vibratory Compactor 3900 Kelly AvenueModel 500B


HYDRAULIC THUMB KITK7870 Quick Coupler required

Emits an audible signal when traveling forward or reverse.

HYDRAULIC BREAKER HOSE KITRequired for KXB460Q installations

(800) 922-2981 Fax (319) 922-2700Allied Construction Products, LLC

Cleveland, OH 44114



Website: http://www.AlliedCP.comTel: (404) 435-6947, Fax: (216) 431-2601


24 INCH EXCAVATING RAKE, QUICK ATTACH





SPARK ARRESTOR MUFFLER KITOptional kit for use in close proximity with grass, brush, timber and similar cellulose materials with potential for ignition. TBA heat insulation kit required.

Compatible with cab models only. Includes AM/FM/WB radio, MP3 Port, mounting kit. The antenna, two speakers and harness comes already preinstalled in the cab


Required for TBA installation.

Cab Mirror KitIncludes two side mirrors, one for each side, one rear mirror, and attaching hardware


BREAKER MOUNT BRACKETRequired for KXB460Q Quick Attach configuration

As required in some states for OSHA compliance

HYDRAULIC BREAKER, 400 ft. lbs. ratedIncludes manual, one moil point and one chisel point. Requires a K7774 hose kit, and a K7758 mount bracket

DESCRIPTION



KUBOTAK Series KX121-3ST3

KX121-3ST3Hydraulic Excavator

FEATURES DIMENSIONS AND OPERATING WEIGHT Auto Idler KX121R1TA, Rubber Tracks, 4-Post ROPS/ OPG (Top Rubber Or Steel Track Models Guard, Level 1) Canopy, 6-in-1 Dozer Blade, ROPS/OPG (Top Guard, Level 1) 4-Post Canopy or Air Dipper Arm, Counterweight Conditioned Cab Overall Length 16’ 9” Suspension Seat Overall Width 5’ 7” Kubota 2 Hydraulic Pump Design Overall Height 8’ 3” 1 Gear, 1 Variable Displacement Pumps Operating Weight* 9,615 lbs. Hydraulic Joystick Controls Ground Clearance 13.0” Two Operating Pattern Selection System Standard Front Dozer Blade KX121R3TA, Rubber Tracks, Air Conditioned ROPS/ 360 Degree Full Rotation OPG (Top Guard, Level 1) Cab, 6-in-1 Dozer Blade,80 Degree Left, 50 Degree Right Boom Swing Dipper Arm, Counterweight 15.9 gpm Adjustable Auxiliary Hydraulics Port Overall Length 16’ 9” Five Second Quick Preheat System Overall Width 5’ 7” Key Switch Stop System Overall Height 8’ 2 Half Pitch Rubber Tracks Operating Weight* 9,815 lbs. Self-Bleed Fuel System Ground Clearance 13.0” Two Speed Travel Swivel Negative Brake * Includes operator’s weight, 175 lbs. Thumb Bracket and Relief Valves Third Line ENGINE V2203 E-TVCS Interim Tier 4 Diesel Engine BASIC UNITS 2013 Production Using TPEM KX121R1TA, Rubber Tracks, 4-Post ROPS/ OPG (Top 4 Cylinder, 4 Cycle Guard, Level 1) Canopy, 6-in-1 Dozer Blade, Dipper 39.0 Net HP @ 2250 rpm Arm, Counterweight KX121R3TA, Rubber Tracks, Air Conditioned OPERATIONAL DIMENSIONS ROPS/ OPG (Top Guard, Level 1) Cab, 6-in-1 Dozer Max Digging Depth 11’ 6” Blade, Dipper Arm, Counterweight Max Digging Radius @ Ground Level 18’ 0” KX121S1TA, Steel Tracks, 4-Post ROPS/ OPG (Top Max Vertical Digging Depth 8’ 2” Guard, Level 1) 6-in-1 Dozer Blade, Dipper Arm, Max Dumping Height 12’ 9” Counterweight KX121S3TA, Steel Tracks, Air Conditioned DOZER BLADE DIMENSIONS ROPS/OPG (Top Guard, Level 1) Cab, 6-in-1 Dozer Width 67” Blade, Dipper Arm, Counterweight Height 13.8” Lift Above Ground 15.7” Drop Below Ground 15.9” PERFORMANCE Digging Force @ Bucket (K7875) 8,754 lbs. Digging Force @ Dipper Arm 3,947 lbs. Travel Speed (Low) 1.7 mph Travel Speed (High) 3.1 mph Climbing Ability 36% / 20° Lift Capacity 3,960 lbs. • Over Front • Blade Grounded • 2.0 ft. Load Point Height

• 8.0 ft. Load radius





KX121R1TA 9,615 $55,200.00 With:

K7864A 225 $1,235.00 $56,435.00

KX121R3TA 9,815 $61,220.00 With:

K7870 72 $904.00 K7875 240 $1,269.00 K7902 Hydraulic Thumb Kit 190 $2,558.00

$65,951.00

STANDARD UNIT KX121R1TA COMPLETE ORDER AND PRICEBASIC UNIT:

DESCRIPTION


6-in-1 Dozer Blade

24” 4.30 cu. ft. 3-Hole H. D. BucketATTACHMENTS:

Dipper arm

Counterweight

Rubber Tracks

STANDARD UNIT KX121R3TA COMPLETE ORDER AND PRICEBASIC UNIT:


6-in-1 Dozer Blade

Counterweight

Dipper arm

ATTACHMENTS:Quick Coupler24” 4.25 cu. ft. Trenching Bucket



HOW TO SELECT A KX121-3ST3 EXCAVATOR(Sample Order Information Page)

Below are examples of a complete KX121-3ST3 order. To submit your order, please select the Basic Unit Model that you desire from Part 1. Then select the attachments from Parts 2 and 3 needed to complete your order.

STEP 1) Select from Part 1 the Basic Unit that fits your needs. For example, choose a KX121R1TA and get: Base Model, rubber tracks, 4-post ROPS/OPG (Top Guard, Level 1) canopy, 6-in-1 dozer blade, dipper arm and counterweight.


(SAMPLE ORDER)





PART 1

KX121R1TA 9,615 $55,200.00 With:

KX121R3TA 9,815 $61,220.00 With:

KX121S1TA 9,755 $55,200.00 With:

KX121S3TA Excavator Basic Unit 9,955 $61,220.00 With:

PART 2

K7792A 200 $1,000.00

K7793 214 $1,075.00

K7794 223 $1,123.00

K7796 260 $1,238.00

K7797 283 $1,357.00

K9836A 194 $988.00

K7870 72 $904.00

K9807 88 $326.00

K7872 160 $964.00

K7873 185 $1,005.00

K7874 190 $1,070.00

K7875 240 $1,269.00

Level I) Cab, 6-in-1 Dozer Blade, Dipper Arm,

Counterweight

BUCKET OPTIONS


MECHANICAL QUICK ATTACH OPTIONSQUICK COUPLERCurl hole and power hole built into quick coupler. Includes two mounting pins, 1 locking pin and hardware.

BUCKET HANGERSSet of 2 bucket ear blanks. Converts buckets to quick coupler style. Modification to match bucket contour required.

18 inch 3.19 cu. ft. Trenching BucketThe K7874 bucket has four teeth. The K7902 Thumb tines contact the end of the teeth and do not mesh between the teeth.





Steel Tracks, 4-Post ROPS/OPG (Top Guard, Level I)

Canopy, 6-in-1 Dozer Blade, Dipper Arm, Counterweight


Canopy, 6-in-1 Dozer Blade, Dipper Arm, Counterweight


36 inch 4.17 cu. ft. Drainage Bucket



Level I) Cab, 6-in-1 Dozer Blade, Dipper Arm,

Counterweight


DESCRIPTION

MODEL KX121-3ST3 BASIC UNITS

6-in-1 Dozer Blade ModelsExcavator Basic UnitRubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I)

Steel Tracks, Air Conditioned ROPS/OPG (Top Guard,








K7461 300 $1,878.00

K7876 265 $1,467.00

K7877A 230 $1,129.00

K7458 270 $1,360.00

K7473 305 $4,336.00

K7454 485 $4,920.00

K7100 72 $1,900.00

K7101 180 $1,150.00

K7106 180 $1,040.00

K7107 180 $250.00

K7110 180 $1,015.00

K7111 180 $1,030.00

K7116 160 $985.00

K7117 185 $1,020.00

K7118 190 $1,085.00

K7119 240 $1,270.00

K7125 300 $1,895.00

Mechanical operation only. Requires K7107 completion kit.

Contains components required to complete the K7106 kit.

DESCRIPTION

MECHANICAL QUICK ATTACH OPTIONS (Cont.)

36” Grading Blade



39 inch 4.72 cu. ft. Tilt Grading Bucket

KK Hydraulic Upgrade Base Kit

KK Hydraulic Upgrade Completion Kit


36 inch 6.64 cu. ft. Drainage BucketK7877A not authorized for thumb applications

Includes hoses and fittings. Tilts 45° each direction

KUBOTA KONNECT® (KK) QUICK COUPLER OPTIONS

KK Hydraulic Quick Coupler Base KitBase coupler. Requires K7101 completion kit.

KK Hydraulic Coupler Completion KitContains hoses, fittings, guards, electrical components required to complete K7100 Kit

KK Mechanical Coupler Base Kit

KK Mechanical Coupler Completion Kit

Converts the K106 Mechanical System to a KK Hydraulic System. Must also order the K7111

Contains hoses, fittings, guards, electrical components required to complete K7110 Kit

12" 2.13 cu. ft. KK Quick Attach Trenching Bucket


24” Excavating Rake


18" 3.19 cu. ft. KK Quick Attach Trenching BucketThe K7118 bucket has four teeth. The K7902 Thumb tines contact the end of the teeth and do not mesh between the teeth.

24" KK Quick Attach Excavating Rake





K7120 265 $1,467.00

K7121 230 $1,240.00

K7122 270 $1,400.00

K7123 305 $4,230.00

K7124 185 $5,150.00

K7127 24 $365.00

K7128 24 $365.00

PART 3

K7902 190 $2,558.00

K7474 36 $150.00

K7455 44 $150.00

KXB510Q 610 $9,300.00

K7774 16 $645.00

K7992 95 $797.00 Hammer

K7126 95 $885.00 for KXB510Q Hammer

K7773 5 $985.00

K9919 4 $124.00

HYDRAULIC BREAKER HOSE KITRequired for KXB510Q installations

Mechanical Quick Attach (K7870) Hammer Bracket for KXB510Q

39" 4.72 cu. ft. KK Quick Attach Tilt Grading Bucket

ATTACHMENTS

HYDRAULIC THUMB KITK7870, K7100, K7106, or K7110 Quick Coupler required

36" Bolt On Cutting EdgeFor K9836A, K7877A, K7473, K7121, or K7123 36" Buckets

BUCKET HANGERS, CONTOURED BUCKETS


36" 6.64 cu. ft. KK Quick Attach Drainage Bucket

36" KK Quick Attach Grading Blade


KK Quick Attach (K7100, K7106, or K7110) Hammer Bracket

ACCUMULATOR CHARGE KITRequired for hydraulic breaker maintenance only, one kit for servicing all breakers.


Converts Mechanical Quick Attach Buckets to KK quick coupler style. Already contoured to match mechanical quick coupler bucket profile.

BUCKET HANGERS, NON-CONTOURED BUCKETSConverts other brand buckets to KK quick coupler style. Modification to match bucket contour required.

DESCRIPTION

KUBOTA KONNECT® (KK) QUICK COUPLER OPTIONS (Cont.)

39" Bolt On Cutting EdgeFor K7454 or K7124 39” Tilt Grading Bucket

HYDRAULIC BREAKER, 500 ft. lbs. ratedIncludes manual, one moil point and one chisel point. Requires a K7774 hose kit, and a K7992 or K7126 mount bracket





PART 3

K9929 439 $3,762.00

K9777 3 $280.00

K9949 8 $240.00

K9969 HEAT INSULATION KIT 2.2 $16.00

PART 4

K7894 220 $1,106.00

K7895 450 $5,903.00

K9946 4 $124.00

K7856C 8.2 $470.00

radio, MP3 port, mounting kit, speakers, and antenna

DESCRIPTION CONTACT:Earth Auger McMillenModel 975, 1475, 1975 503 Gay Street

Delhi, Iowa 52223

Vibratory CompactorModel 500B 3900 Kelly Avenue

Flail MowerModel 30EX PO Box 22

Hughson, CA 95326




SPARK ARRESTOR MUFFLER KIT

Optional kit for use in close proximity with grass, brush, timber and similar cellulose material with potential for ignition. Requires K9969 Heat Insulation Kit

Required for K9949 installation


Compatible with cab models only. Kit includes AM/FM/WB


Allied Construction Products, LLC


RADIO OPTION

(563) 922-2981 Fax (563) 922-2700

Cleveland, OH 44114Tel: (404) 435-6947, Fax: (216) 431-2601

Rockhound Attachments

Tel: (800) 426-5615, Fax: (360) 230-2322




DESCRIPTION

ATTACHMENTS (Cont.)

Website: http://www.Rockhound.com





KX040-4 Hydraulic Excavator

FEATURES BASIC UNITS (cont’d)Eco Plus System KX040-4S1P, Steel Tracks, 4-Post ROPS/OPG (TOP Auto Idler GUARD, LEVEL I) Canopy, Dozer Blade, SP2 Rubber Or Steel Track Models KX040-4S1AP, Steel Tracks, 4-Post ROPS/OPG (TOP ROPS/OPG (Top Guard, Level I) 4-Post Canopy or Air GUARD, LEVEL I) Canopy, Angle Dozer Blade, SP2 Conditioning Cab KX040-4S1TP, Steel Tracks, 4-Post ROPS/OPG (TOP Suspension Seat GUARD, LEVEL I) Canopy, 6-in-1 Dozer Blade, SP2 Kubota 1 Hydraulic Pump Load Sensing System KX040-4S3, Steel Tracks, Air Conditioned ROPS/OPG 1 Variable Displacement Pump (TOP GUARD, LEVEL I) Cab, Dozer Blade All Controls Hydraulic Pilot Controls KX040-4S3A, Steel Tracks, ROPS/OPG (TOP GUARD, Two Operating Pattern Selection System LEVEL I) Air Conditioned Cab, Angle Dozer Blade Accumulator KX040-4S3T, Steel Tracks, ROPS/OPG (TOP GUARD, Digital Control Panel LEVEL I) Air Conditioned Cab, 6-in-1 Dozer Blade Attachment Flow Presets, Service Alerts KX040-4S3P, Steel Tracks, Air Conditioned ROPS/OPG Standard Front Dozer Blade w/ Float (TOP GUARD, LEVEL I) Cab, Dozer Blade, SP2 Optional Float Angle Blade w/ Bolt-on Cutting Edge KX040-4S3AP, Steel Tracks, ROPS/OPG (TOP GUARD, 360 Degree Full Rotation LEVEL I) Air Conditioned Cab, Angle Dozer Blade, SP2 70 Degree Left, 55 Degree Right Boom Swing KX040-4S3TP, Steel Tracks, ROPS/OPG (TOP GUARD, 17.2 gpm Adjustable Auxiliary Hydraulics Port 1 LEVEL I) Air Conditioned Cab, 6-in-1 Dozer Blade, SP2 Auxiliary Hydraulics Diverter Valve 9.8 gpm Adjustable Auxiliary Hydraulics Port 2 Option DIMENSIONS AND OPERATING WEIGHT Thumb Bracket and Relief Valves KX040-4R1, Rubber Tracks, 4-Post ROPS/OPG (TOP Five Second Quick Preheat System GUARD, LEVEL I) Canopy, Dozer Blade Key Switch Stop System Overall Length 16’ 8.2” Half Pitch Rubber Tracks Overall Width 5’ 6.9”

Self-Bleed Fuel System Overall Height 8’ 1.8” Auto-Downshift Two Speed Travel System Operating Weight* 9,545 lbs. Swivel Negative Brake Ground Clearance 12.9” Travel Negative Brake Third Line KX040-4R3A, Rubber Tracks, Air Conditioned ROPS/OPG (TOP GUARD, LEVEL I) Cab, BASIC UNITS Angle Dozer Blade KX040-4R1, Rubber Tracks, 4-Post ROPS/OPG (TOP Overall Length 16’ 8.1” GUARD, LEVEL I) Canopy, Dozer Blade Overall Width 5’ 6.9” KX040-4R1A, Rubber Tracks, ROPS/OPG (TOP GUARD, Overall Height 8’ 1.8” LEVEL I) Canopy, Angle Dozer Blade Operating Weight* 9,195 lbs. KX040-4R1T, Rubber Tracks, ROPS/OPG (TOP GUARD, Ground Clearance 12.9” LEVEL I) Canopy, 6-in-1 Dozer Blade * Includes operator’s weight, 175 lbs. KX040-4R1P, Rubber Tracks, 4-Post ROPS/OPG (TOP GUARD, LEVEL I), Canopy, Dozer Blade, SP2 ENGINEKX040-4R1AP, Rubber Tracks, 4-Post ROPS/OPG (TOP D1803 Kubota DI CRS Turbo Tier 4 Diesel Engine GUARD, LEVEL I) Canopy, Angle Dozer Blade, SP2 3 Cylinder, 4 Cycle KX040-4R1TP, Rubber Tracks, 4-Post ROPS/OPG (TOP 40.4 Net HP @ 2200 rpm GUARD, LEVEL I) Canopy, 6-in-1 Dozer Blade, SP2 KX040-4R3, Rubber Tracks, Air Conditioned ROPS/OPG OPERATIONAL DIMENSIONS (TOP GUARD, LEVEL I) Cab, Angle Dozer Blade Max Digging Depth 11’ 2.7” KX040-4R3A, Rubber Tracks, Air Conditioned ROPS/OPG Max Digging Radius @ Ground Level 17’ 9.0” (TOP GUARD, LEVEL I) Cab, Angle Dozer Blade Max Vertical Digging Depth 7’ 4.8” KX040-4R3T, Rubber Tracks, Air Conditioned ROPS/OPG Max Dumping Height 12’ 9.5” (TOP GUARD, LEVEL I) Cab, 6-in-1 Dozer Blade KX040-4R3P, Rubber Tracks, Air Conditioned ROPS/OPG STANDARD DOZER BLADE DIMENSIONS (TOP GUARD, LEVEL I) Cab, Dozer Blade, SP2 Width 66.9” KX040-4R3AP, Rubber Tracks, Air Conditioned ROPS/OPG Height 15.75” (TOP GUARD, LEVEL I), Cab, Angle Dozer Blade, SP2 Lift Above Ground 15.17” KX040-4R3TP, Rubber Tracks, Air Conditioned ROPS/OPG Drop Below Ground 15.94” (TOP GUARD, LEVEL I), Cab, 6-in-1 Dozer Blade, SP2 KX040-4S1, Steel Tracks, 4-Post ROPS/OPG (TOP PERFORMANCE GUARD, LEVEL I) Canopy, Dozer Blade Digging Force @ Bucket (K7875) 9,535 lbs. KX040-4S1A, Steel Tracks, 4-Post ROPS/OPG (TOP Digging Force @ Dipper Arm 4,112 lbs. GUARD, LEVEL I) Canopy, Angle Dozer Blade Travel Speed (Low) 1.8 mph KX040-4S1T, Steel Tracks, 4-Post ROPS/OPG (TOP Travel Speed (High) 3.1 mph GUARD, LEVEL I) Canopy, 6-in-1 Dozer Blade Climbing Ability 36% / 20° KX040-4S1P, Steel Tracks, 4-Post ROPS/OPG (TOP Lift Capacity 4,080 lbs. GUARD, LEVEL I) Canopy, Dozer Blade, SP2 Over Front, Blade Grounded 2.0 ft. Load Point Height, 8.0 ft. Load radius





KX040-4R1 9,195 $54,200.00 With:

K7864A 225 $1,235.00 $55,435.00

KX040-4R3A 9,855 $62,900.00 With:

K7870 72 $904.00 K7875 240 $1,269.00 K7910 Hydraulic Thumb Kit 195 $2,558.00

$67,631.00

Rubber Tracks

Rubber Tracks

Quick Coupler


Angle Dozer BladeDipper arm

ATTACHMENTS:

BASIC UNIT:


24” 4.30 cu. ft. 3-Hole H. D. Bucket


Counterweight



Dozer Blade

STANDARD UNIT KX040-4R3A COMPLETE ORDER AND PRICEBASIC UNIT:

DESCRIPTION


ATTACHMENTS:



Below are examples of a complete KX040-4 order. To submit your order, please select the Basic Unit Model that you desire from Part 1. Then select the attachments from Parts 2 and 3 needed to complete your order.

STEP 1) Select from Part 1 the Basic Unit that fits your needs. For example, choose a KX040-4R1 and get: Base Model, rubber tracks, 4-post ROPS/OPG (Top Guard, Level I) canopy, dozer blade, dipper arm and counterweight.


(SAMPLE ORDER)





PART 1

Excavator Basic Unit 9,195 $54,200.00

With:

Canopy, Dozer Blade, Dipper Arm, Counterweight

9,545 $56,700.00

With:

Canopy, Angle Dozer Blade, Dipper Arm, Counterweight

KX040-4R1T 9,635 $60,550.00 With:

Excavator Basic Unit 9,195 $55,800.00 With:

Canopy, Dozer Blade, Dipper Arm, Counterweight, SP2


With:

Canopy, Angle Dozer Blade, Dipper Arm, Counterweight, SP2

KX0404R1TP 10,010 $62,150.00 With:


With:



With:

KX040-4R3T 9,655 $66,750.00 With:


Level I) Cab, Dozer Blade, Dipper Arm, Counterweight, SP2


KX0404R3TP Excavator Basic Unit 10,010 $68,350.00 With:


Level I) Cab, 6-in-1 Dozer Blade, Dipper Arm, Counterweight


KX040-4R3A

Counterweight


DESCRIPTION


KX040-4R3APRubber Tracks, Air Conditioned ROPS/OPG (Top Guard, Level I) Cab, Angle Dozer Blade, Dipper Arm, Counterweight, SP2



KX040-4R1

Rubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I)

KX040-4R1A Excavator Basic Unit

KX040-4R3P


Level I) Cab, 6-in-1 Dozer Blade, Dipper Arm, Counterweight, SP2

KX040-4S1Steel Tracks, 4-Post ROPS/OPG (Top Guard, Level I) Canopy, Dozer Blade, Dipper Arm, Counterweight



Excavator Basic UnitRubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I) Canopy, 6-in-1 Dozer Blade, Dipper Arm, Counterweight

KX040-4R1PRubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I)

KX040-4R1AP


Excavator Basic UnitRubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I) Canopy, 6-in-1 Dozer Blade, Dipper Arm, Counterweight,

KX040-4R3

SP2

Level I) Cab, Angle Dozer Blade, Dipper Arm,





PART 1

9,700 $58,200.00 With:




10,010 $63,650.00 With:



9,655 $68,250.00 With:




Level I) Cab, 6-in-1 Dozer Blade, Dipper Arm,Counterweight, SP2

KX040-4S3T Excavator Basic UnitSteel Tracks, Air Conditioned ROPS/OPG (Top Guard, Level I) Cab, 6-in-1 Dozer Blade, Dipper Arm, Counterweight

KX040-4S3PSteel Tracks, Air Conditioned ROPS/OPG (Top Guard, Level I) Cab, Dozer Blade, Dipper Arm, Counterweight, SP2

KX040-4S3APSteel Tracks, Air Conditioned ROPS/OPG (Top Guard, Level I) Cab, Angle Dozer Blade, Dipper Arm, Counterweight, SP2

KX0404S3TP

Level I) Cab, Angle Dozer Blade, Dipper Arm, Counterweight

KX040-4S1A Excavator Basic UnitSteel Tracks, 4-Post ROPS/OPG (Top Guard, Level I) Canopy, Angle Dozer Blade, Dipper Arm, Counterweight

KX040-4S1PSteel Tracks, 4-Post ROPS/OPG (Top Guard, Level I)

KX040-4S1APSteel Tracks, 4-Post ROPS/OPG (Top Guard, Level I)

SP2

KX0404S1TPSteel Tracks, 4-Post ROPS/OPG (Top Guard, Level I) Canopy, 6-in-1 Dozer Blade, Dipper Arm, Counterweight, SP2

KX040-4S3


KX040-4S3ASteel Tracks, Air Conditioned ROPS/OPG (Top Guard,


DESCRIPTION

MODEL KX040-4 BASIC UNITS (Cont.)

Canopy, Dozer Blade, Dipper Arm, Counterweight, SP2



KX040-4S1TSteel Tracks, 4-Post ROPS/OPG (Top Guard, Level I) Canopy, 6-in-1 Dozer Blade, Dipper Arm, Counterweight

Canopy, Angle Dozer Blade, Dipper Arm, Counterweight,





PART 2

K7792A 200 $1,000.00

K7793 214 $1,075.00

K7794 223 $1,123.00

K7796 260 $1,238.00

K7797 283 $1,357.00

K9836A 194 $988.00

K7870 72 $904.00

K9807 88 $326.00

K7872 160 $964.00

K7873 185 $1,005.00

K7874 190 $1,070.00

K7875 240 $1,269.00

K7461 300 $1,878.00

K7876 265 $1,467.00

K7877A 230 $1,129.00

K7458 270 $1,360.00

K7473 305 $4,336.00

K7454 485 $4,920.00



18 inch 3.19 cu. ft. Trenching BucketThe K7874 bucket has four teeth. The K7910 Thumb tines contact the end of the teeth and do not mesh between the teeth.




MECHANICAL QUICK ATTACH OPTIONS

QUICK COUPLERCurl hole and power hole built into quick coupler. Includes two mounting pins, 1 locking pin and hardware.

BUCKET HANGERS

Set of 2 bucket ear blanks. Converts buckets to quick coupler style. Modification to match bucket contour required.


39 inch 4.72 cu. ft. Tilt Grading BucketIncludes hoses and fittings. Tilts 45° each direction

DESCRIPTION

BUCKET OPTIONS







24” Excavating Rake


36” Grading Blade



K7877A not authorized for thumb applications


KUBOTAK Series KX040-4ORDER CODE

APPROX. SHIP WT.


K7100 72 $1,900.00

K7101 180 $1,150.00

K7106 180 $1,040.00

K7108 180 $250.00

K7110 180 $1,015.00

K7112 180 $1,030.00

K7116 160 $985.00

K7117 185 $1,020.00

K7118 190 $1,085.00

K7119 240 $1,270.00

K7125 300 $1,895.00

K7120 265 $1,467.00

K7121 230 $1,240.00

K7122 270 $1,400.00

K7123 305 $4,230.00

K7124 185 $5,150.00

K7127 24 $365.00

K7128 24 $365.00

KK Hydraulic Quick Coupler Base Kit

KK Hydraulic Coupler Completion Kit

Converts the K106 Mechanical System to a KK Hydraulic System. Must also order the K7112





24" KK Quick Attach Excavating Rake

36" 6.64 cu. ft. KK Quick Attach Drainage Bucket

36" KK Quick Attach Grading Blade

BUCKET HANGERS, NON-CONTOURED BUCKETS


KK Mechanical Coupler Base KitMechanical operation only. Requires K7108 completion kit.

DESCRIPTION

Contains components required to complete the K7106 kit.

KK Hydraulic Upgrade Base Kit

KK Hydraulic Upgrade Completion Kit


Converts other brand buckets to KK quick coupler style. Modification to match bucket contour required.

BUCKET HANGERS, CONTOURED BUCKETS



KUBOTA KONNECT® (KK) QUICK COUPLER OPTIONS

Base coupler. Requires K7101 completion kit.

KK Mechanical Coupler Completion Kit

Converts Mechanical Quick Attach Buckets to KK quick coupler style. Already contoured to match mechanical quick coupler bucket profile.





APPROX. SHIP WT.


PART 3

K7910 190 $2,558.00

K7474 41 $150.00

K7455 44 $150.00

KXB510Q 610 $9,000.00

K7774 16 $645.00

K7992 95 $797.00

K7126 95 $885.00 for KXB510Q Hammer

K7773 5 $985.00

K7940 6 $135.00

K9929 439 $3,762.00

K7927 2 $143.00

PART 4K9153 250 $1,850.00

CANOPY

K9152 390 $8,150.00

K7479 4 $280.00

K9946 4 $124.00

Includes manual, one moil point and one chisel point. Requires a K7774 hose kit, and a K7992 or K7126 mount bracket


Required for KXB510Q installations

Mechanical Quick Attach (K7870) Hammer Bracket for

KK Quick Attach (K7100, K7106, or K7110) Hammer Bracket

Cab Mirror Kit

KXB510Q Hammer

ATTACHMENTS

HYDRAULIC THUMB KITK7870, K7100, K7106, or K7110 Quick Coupler required

36" Bolt On Cutting EdgeFor K9836A, K7877A, K7473, K7121, or K7123 36" Buckets

39" Bolt On Cutting EdgeFor K7454 or K7124 39” Tilt Grading Bucket




one rear mirror, and attaching hardware


ACCUMULATOR CHARGE KITRequired for hydraulic breaker maintenance only, one kit for servicing all breakers.




ROPS / OPG (Top Guard, Level I)REPLACEMENT 4-POST ROPS / OPG (Top Guard, Level I)


DESCRIPTION

Includes two side mirrors, one for each side,





PART 4K7942A 8 $248.00

DESCRIPTION CONTACT:Earth Auger McMillenModel 975, 1475, 1975 503 Gay Street

Delhi, Iowa 52223

Vibratory CompactorModel 500B 3900 Kelly Avenue

Flail MowerModel 30EX PO Box 22

Hughson, CA 95326


ROPS / OPG (Top Guard, Level I) (Cont.)RADIO OPTION


DESCRIPTION

Cleveland, OH 44114Tel: (404) 435-6947, Fax: (216) 431-2601

Rockhound Attachments

Tel: (800) 426-5615, Fax: (360) 230-2322



Website: http://www.Rockhound.com

(563) 922-2981 Fax (563) 922-2700Allied Construction Products, LLC




U55-4Tight Tail Swing Hydraulic Excavator

FEATURES ENGINEEco Plus System V2607 Kubota DI CRS Tier 4 Diesel Engine Auto Idler 4 Cylinder, 4 Cycle Rubber Or Steel Track Models 47.1 Net HP @ 2200 rpm 4-Post ROPS/OPG (Top Guard Level I) Canopy or Air Conditioned Cab Suspension Seat OPERATIONAL DIMENSIONS Kubota 3 Hydraulic Pump Load Sensing System Max Digging Depth 11’ 10.3” 1 Gear, 2 Variable Displacement Pumps Max Digging Radius @ Ground Level 19’ 6.1” All Controls Hydraulic Pilot Controls Max Vertical Digging Depth 4’ 11.6” Two Operating Pattern Selection System Max Dumping Height 13’ 2.3” Accumulator Digital Control Panel STANDARD DOZER BLADE DIMENSIONS Attachment Flow Presets, Service Alerts Width 77.2” Standard Front Dozer Blade w/ Float Height 16.1” Optional Float Angle Blade w/ Bolt-on Cutting Edge Lift Above Ground 17.3” 360 Degree Full Rotation Drop Below Ground 16.1” 70 Degree Left, 55 Degree Right Boom Swing 19.8 gpm Adjustable Auxiliary Hydraulics Port 1 PERFORMANCE Auxiliary Hydraulics Diverter Valve Digging Force @ Bucket (K7919) 11,177 lbs. 9.8 gpm Adjustable Auxiliary Hydraulics Port 2 Option Digging Force @ Dipper Arm 6,261 lbs. Thumb Bracket And Relief Valves Travel Speed (Low) 1.8 mph Five Second Quick Preheat System Travel Speed (High) 3.1 mph Key Switch Stop System Climbing Ability 36% / 20° Half Pitch Rubber Tracks Lift Capacity 3,700 lbs. Self-Bleed Fuel System Over Front Auto-Downshift Two Speed Travel System Blade Grounded Swivel Negative Brake 4.0 Ft. Load Point Height Travel Negative Brake 12.0 Ft. Load Radius Third Line DIMENSIONS AND OPERATING WEIGHT BASIC UNITS U55-4R1, Rubber Tracks, ROPS/OPG (Top Guard Level U55-4R1, Rubber Tracks, ROPS/OPG (Top Guard, I) Canopy, Dozer Blade, Dipper Arm, Counterweight Level I) Canopy, Dozer Blade, Dipper Arm, Counterweight U55-4R1P, Rubber Tracks, ROPS/OPG (Top Guard, Level Overall Length 18’ 1.3” I) Canopy, Dozer Blade, Dipper Arm, Counterweight, SP2 Overall Width 6’ 5.2” U55-4R1A, Rubber Tracks, ROPS/OPG (Top Guard, Level Overall Height 8’ 4.4” I) Canopy, Angle Dozer Blade, Dipper Arm, Counterweight Operating Weight* 11,915 lbs. U55-4R1AP, Rubber Tracks, ROPS/OPG (Top Guard, Ground Clearance 12’ 0.2” Level I) Canopy, Angle Dozer Blade, Dipper Arm, Counterweight, SP2 U55-4R3AP, Rubber Tracks, ROPS/OPG (Top Guard U55-4R3, Rubber Tracks, A/C ROPS/OPG (Top Guard, Level I) A/C Cab, Angle Dozer Blade, Dipper Arm, Level I) Cab, Dozer Blade, Dipper Arm, Counterweight Counterweight, SP2 U05-4R3P, Rubber Tracks, A/C ROPS/OPG (Top Guard, Overall Length 18’ 1.3” Level I) Cab, Dozer Blade, Dipper Arm, Counterweight, SP2 Overall Width 6’ 5.2” U55-4R3A, Rubber Tracks, A/C ROPS/OPG (Top Guard, Overall Height 8’ 4” Level I) Cab, Angle Dozer Blade, Dipper Arm, Operating Weight* 12,535 lbs. Counterweight Ground Clearance 12.0.2” U55-4R3AP, Rubber Tracks, A/C ROPS/OPG (Top Guard, * Includes operator’s weight, 175 lbs. Level I) Cab, Angle Dozer Blade, Dipper Arm, Counterweight, SP2 U55-4S3A, Steel Tracks, A/C ROPS/OPG (Top Guard, Level I) Cab, Angle Dozer Blade, Dipper Arm, Counterweight U55-4S3AP, Steel Tracks, A/C ROPS/OPG (Top Guard, Level I) Cab, Angle Dozer Blade, Dipper Arm, Counterweight, SP2





U55-4R1 12,200 $67,000.00 With:

K7915 100 $851.00 K7919 295 $1,219.00

$69,070.00

U55-4R3AP 12,535 $77,600.00 With:

K7915 100 $851.00 K7937 195 $2,147.00 K7919 295 $1,219.00

$81,817.00

Dipper arm

Two Service Ports


Hydraulic Thumb

Counterweight

Rubber Tracks


Angle Dozer BladeDipper arm

Quick Coupler



ATTACHMENTS:

BASIC UNIT:

DESCRIPTION

BASIC UNIT:

Dozer Blade


ATTACHMENTS:

STANDARD UNIT U55-4R3AP COMPLETE ORDER AND PRICE

Quick Coupler

CounterweightOne Service Port


STANDARD UNIT U55-4R1 COMPLETE ORDER AND PRICE

HOW TO SELECT A U55-4 EXCAVATOR(Sample Order Information Page)

Below are examples of a complete U55-4 order. To submit your order, please select the Basic Unit Model that you desire from Part 1. Then select the attachments from Parts 2 and 3 needed to complete your order.

STEP 1)

Select from Part 1 the Basic Unit that fits your needs. For example, choose a U55-4R1 and get: Base Model, rubber tracks, 4-post ROPS/OPG (Top Guard Level I) Canopy, dozer blade, dipper arm, counterweight, and one service port


(SAMPLE ORDER)





PART 1

U55-4R1 12,200 $67,000.00 With:

U55-4R1P 12,200 $68,600.00 With:

U55-4R1A 11,915 $69,800.00 With:

U55-4R1AP 11,915 $71,400.00 With:

U55-4R3 12,400 $73,200.00 With:

U55-4R3P 12,400 $74,800.00 With:

U55-4R3A 12,535 $76,000.00 With:

U55-4R3AP 12,535 $77,600.00 With:

U55-4S3A 12,755 $77,500.00 With:

U55-4S3AP 12,755 $79,100.00 With:

Canopy, Dozer Blade, Dipper Arm, Counterweight

Rubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I) Canopy, Dozer Blade, Dipper Arm, Counterweight, SP2


DESCRIPTION




Rubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I) Canopy, Angle Blade, Dipper Arm, Counterweight

Rubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I) Canopy, Angle Blade, Dipper Arm, Counterweight, SP2

Rubber Tracks, A/C ROPS/OPG (Top Guard, Level I) Cab, Dozer Blade, Dipper Arm, Counterweight

Rubber Tracks, A/C ROPS/OPG (Top Guard, Level I) Cab,



Steel Tracks, A/C ROPS/OPG (Top Guard, Level I) Cab, Angle Blade, Dipper Arm, Counterweight

Steel Tracks, A/C ROPS/OPG (Top Guard, Level I) Cab, Angle Blade, Dipper Arm, Counterweight, SP2




MODEL U55 BASIC UNITS



Dozer Blade, Dipper Arm, Counterweight, SP2

Rubber Tracks, A/C ROPS/OPG (Top Guard, Level I) Cab, Angle Blade, Dipper Arm, Counterweight

Rubber Tracks, A/C ROPS/OPG (Top Guard, Level I) Cab, Angle Blade, Dipper Arm, Counterweight, SP2



APPROX. SHIP WT.


PART 2

K7915 100 $851.00

K7916 82 $294.00

K7917 249 $1,138.00

K7918 275 $1,155.00

K7919 295 $1,219.00

K7920 338 $1,486.00

K7921 368 $1,658.00

K7926 265 $1,200.00

K7922 230 $1,138.00

K7474 41 $150.00

K7924 270 $1,627.00

K7878 51 $200.00

PART 3K7937 195 $2,147.00

K7932 325 $1,090.00

KXB560Q 820 $12,250.00

K7931 99 $797.00

K7941 22 $567.00

K7773 5 $985.00

K7940 20 $135.00

K7927 7 $143.00

K7938 1298 $5,150.00

Bolt On Cutting Edge for K7924 48” Drainage Bucket


36 inch 3.48 cu. ft. Cemetery Bucket

36 inch 6.64 cu. ft. Drainage BucketPre-drilled for bolt on cutting edge.


on models with K7937 thumb.Pre-drilled for bolt on cutting edge. Not authorized for use




FROST RIPPER

HYDRAULIC BREAKER



BREAKER MOUNT BRACKETRequired for all KXB560Q installations

BREAKER HOSE KIT

Includes manual, one moil point and one chisel point. Requires K7931 Breaker Mount Bracket and K7941 Hose Kit.


TRAVEL ALARM KIT

Steel Crawler Kit




HYDRAULIC THUMB KIT


Quick Coupler

ATTACHMENTS

The K7918 bucket has four teeth. The K7937 thumb tines contact the end of the teeth and do not mesh between the teeth.



Bucket Hangers

DESCRIPTION

Converts tracks from rubber to steel

Required for hydraulic breaker maintenance only, one kit for servicing all breakers






PART 4

K7935 250 $1,550.00

K7936 390 $6,600.00

K7479 4 $280.00

K9946 4 $124.00

K7942A 6 $248.00

V4218A 3 $176.00 STROBE LIGHT KIT

DESCRIPTION


RADIO OPTION


Cab Mirror KitIncludes two side mirrors, one for each side, one rear mirror, and attaching hardware

The K7936 cab is configured as a replacement for damaged factory mounted cabs. It does not include cabin electrical wiring, wiper motor, air conditioner, heater, or defroster. Refer to illustrated parts list to order these components.




Cab pre-wired with switch. A new bracket must be created for the installation. See installation instructions.


DESCRIPTION CONTACT:


McMillen 503 Gay Street Delhi, IA 52223 Tel: (800) 922-2981, Fax (319) 922-2700 Website: www.paladinbrands.com

Vibratory Compactor Model 500B, 1000B

Allied Construction Products, LLC 3900 Kelly Avenue Cleveland, OH 44114 Tel: (404) 435-6947, Fax: (216) 431-2601 Website: hppt://www.AlliedCP.com

Flail Mower Model 30EX

Rockhound Attachments PO Box 220 Hughson, CA 95326 Tel: (800) 426-5615, Fax (360) 230-2322 Website: www.rockhound.com




KUBOTA




KX057-4Hydraulic Excavator

FEATURES ENGINEEco Plus System V2607 Kubota DI CRS Tier 4 Diesel Engine Auto Idler 4 Cylinder, 4 Cycle Rubber Or Steel Track Models 47.1 Net HP @ 2200 rpm 4-Post ROPS/OPG (Top Guard, Level I) Canopy or Air Conditioned Cab Suspension Seat OPERATIONAL DIMENSIONS Kubota 3 Hydraulic Pump Load Sensing System Max Digging Depth 12’ 8.2” 1 Gear, 2 Variable Displacement Pumps Max Digging Radius @ Ground Level 20’ 0.5” All Controls Hydraulic Pilot Controls Max Vertical Digging Depth 5’ 7.3” Two Operating Pattern Selection System Max Dumping Height 13’ 8.6” Accumulator Digital Control Panel STANDARD DOZER BLADE DIMENSIONS Attachment Flow Presets, Service Alerts Width 77.2” Standard Front Dozer Blade w/ Float Height 16.1” Optional Float Angle Blade w/ Bolt-on Cutting Edge Lift Above Ground 17.3” 360 Degree Full Rotation Drop Below Ground 16.1” 70 Degree Left, 55 Degree Right Boom Swing 19.8 gpm Adjustable Auxiliary Hydraulics Port 1 PERFORMANCE Auxiliary Hydraulics Diverter Valve Digging Force @ Bucket (K7919) 11,177 lbs. 9.8 gpm Adjustable Auxiliary Hydraulics Port 2 Option Digging Force @ Dipper Arm 5,644 lbs. Thumb Bracket And Relief Valves Travel Speed (Low) 1.8 mph Five Second Quick Preheat System Travel Speed (High) 3.1 mphKey Switch Stop System Climbing Ability 36% / 20° Half Pitch Rubber Tracks Lift Capacity 3,410 lbs. Self Bleed Fuel System Over Front Auto-Downshift Two Speed Travel System Blade Grounded Swivel Negative Brake 4.0 Ft. Load Point Height Travel Negative Brake 12.0 Ft. Load Radius Third Line DIMENSIONS AND OPERATING WEIGHT KX057-4R1, Rubber Tracks, ROPS/OPG (Top Guard, BASIC UNITS Level I) Canopy, Dozer Blade, Dipper Arm, Counterweight KX057-4R1, Rubber Tracks, ROPS/OPG (Top Guard, Level I) Overall Length 18’ 1.3” Canopy, Dozer Blade, Dipper Arm, Counterweight Overall Width 6’ 5.2” KX057-4R1P, Rubber Tracks, ROPS/OPG (Top Guard, Overall Height 8’ 4.4” Level I) Canopy, Dozer Blade, Dipper Arm, Operating Weight* 12,200 lbs. Counterweight, SP2 Ground Clearance 12’ 0.2” KX057-4R1A, Rubber Tracks, ROPS/OPG (Top Guard, Level I) Canopy, Angle Dozer Blade, Dipper Arm, KX057-4R3AP, Rubber Tracks, ROPS/OPG (Top Guard, Counterweight A/C Cab, Angle Dozer Blade, Dipper Arm, KX057-4R1AP, Rubber Tracks, ROPS/OPG (Top Guard, Level I) Counterweight, SP2 Canopy, Angle Dozer Blade, Dipper Arm, Counterweight, SP2 Overall Length 18’ 1.3” KX057-4R3, Rubber Tracks, A/C ROPS/OPG (Top Guard, Overall Width 6’ 5.2” Level I) Cab, Dozer Blade, Dipper Arm, Counterweight Overall Height 8’ 4” KX057-4R3P, Rubber Tracks, A/C ROPS/OPG (Top Guard, Operating Weight* 12,535 lbs. Level I) Cab, Dozer Blade, Dipper Arm, Counterweight, SP2 Ground Clearance 12.0.2” KX057-4R3A, Rubber Tracks, A/C ROPS/OPG (Top Guard, * Includes operator’s weight, 175 lbs. Level I) Cab, Angle Dozer Blade, Dipper Arm, Counterweight, KX057-4R3AP, Rubber Tracks, A/C ROPS/OPG (Top Guard, Level I) Cab, Angle Dozer Blade, Dipper Arm, Counterweight, SP2 KX057-4S3A, Steel Tracks, A/C ROPS/OPG (Top Guard, Level I) Cab, Angle Dozer Blade, Dipper Arm, Counterweight KX057-4S3AP, Steel Tracks, A/C ROPS/OPG (Top Guard, Level I) Cab, Angle Dozer Blade, Dipper Arm, Counterweight, SP2





KX057-4R1 11,637 $71,200.00 With:

K7915 100 $851.00 K7919 295 $1,219.00

$73,270.00

KX057-4R3AP 12,252 $81,800.00 With:

K7915 100 $851.00 K7937 195 $2,147.00 K7919 295 $1,219.00

$86,017.00

DESCRIPTION



Dipper arm

BASIC UNIT:

Rubber Tracks


One Service PortCounterweight

ATTACHMENTS:


Excavator Basic UnitRubber Tracks

Dipper arm

Quick Coupler


CounterweightTwo Service Ports

Quick Coupler

Dozer Blade

Angle Dozer Blade

Hydraulic Thumb

ATTACHMENTS:


STANDARD UNIT KX057-4R3AP COMPLETE ORDER AND PRICE

BASIC UNIT:



STEP 1)

Select from Part 1 the Basic Unit that fits your needs. For example, choose a KX057-4R1 and get: Base Model, rubber tracks, 4-post ROPS/OPG (Top Guard, Level I) canopy, dozer blade, dipper arm, counterweight, and one service port


(SAMPLE ORDER)





PART 1

KX057-4R1 12,200 $71,200.00 With:

KX057-4R1P 12,200 $72,800.00 With:

KX057-4R1A 12,620 $74,000.00 With:

KX057-4R1AP 12,620 $75,600.00 With:

KX057-4R3 12,400 $77,400.00 With:

KX057-4R3P 12,400 $79,000.00 With:

KX057-4R3A 12,620 $80,200.00 With:

KX057-4R3AP 12,620 $81,800.00 With:

KX057-4S3A 12,755 $81,700.00 With:

KX057-4S3AP 12,755 $83,300.00 With:







Rubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I) Canopy, Dozer Blade, Dipper Arm, Counterweight, SP2

Rubber Tracks, 4-Post ROPS/OPG (Top Guard, Level I) Canopy, Angle Blade, Dipper Arm, Counterweight


Dozer Blade, Dipper Arm, Counterweight, SP2

Rubber Tracks, A/C ROPS/OPG (Top Guard, Level I) Cab, Angle Blade, Dipper Arm, Counterweight

Rubber Tracks, A/C ROPS/OPG (Top Guard, Level I) Cab, Angle Blade, Dipper Arm, Counterweight, SP2

Steel Tracks, A/C ROPS/OPG (Top Guard, Level I) Cab, Angle Blade, Dipper Arm, Counterweight

Steel Tracks, A/C ROPS/OPG (Top Guard, Level I) Cab, Angle Blade, Dipper Arm, Counterweight, SP2


Canopy, Angle Blade, Dipper Arm, Counterweight, SP2

Rubber Tracks, A/C ROPS/OPG (Top Guard, Level I)




DESCRIPTION



Cab, Dozer Blade, Dipper Arm, Counterweight

Rubber Tracks, A/C ROPS/OPG (Top Guard, Level I) Cab,





PART 2

K7915 100 $851.00

K7916 82 $294.00

K7917 249 $1,138.00

K7918 275 $1,155.00

K7919 295 $1,219.00

K7920 338 $1,486.00

K7921 368 $1,658.00

K7926 265 $1,200.00

K7922 230 $1,138.00

K7474 41 $150.00

K7924 270 $1,627.00

K7878 51 $200.00

PART 3 ATTACHMENTSK7937 195 $2,147.00

K7932 325 $1,090.00

KXB560Q 820 $12,250.00

K7931 99 $797.00

K7941 22 $567.00

K7773 5 $985.00

K7940 20 $135.00

K7927 7 $143.00

Required for hydraulic breaker maintenance only, one kit for servicing all breakers




36 inch 6.64 cu. ft. Drainage BucketPre-drilled for bolt on cutting edge



Quick Coupler

DESCRIPTION



TRAVEL ALARM KIT

BREAKER MOUNT BRACKETRequired for all KXB560Q installations

BREAKER HOSE KIT

Bucket Hangers





36 inch 3.48 cu. ft. Cemetery Bucket


Pre-drilled for bolt on cutting edge

Includes manual, one moil point and one chisel point. Requires K7931 Breaker Mount Bracket and K7941 Hose Kit.

The K7918 bucket has four teeth. The K7937 thumb tines contact the end of the teeth and do not mesh between the teeth.




HYDRAULIC THUMB KIT


FROST RIPPER

HYDRAULIC BREAKER



APPROX. SHIP WT.


PART 3K7938 1298 $5,150.00

PART 4

K7933 250 $1,550.00

K7934 390 $6,600.00

K7479 4 $280.00

K9946 4 $124.00

K7942A 6 $248.00

V4218A 3 $176.00



ATTACHMENTS (Cont.)


Steel Crawler Kit

RADIO OPTION

one rear mirror, and attaching hardware




STROBE LIGHT KIT

DESCRIPTION


Converts tracks from rubber to steel


Cab Mirror KitIncludes two side mirrors, one for each side,




McMillen 503 Gay Street Delhi, IA 52223 Tel: (800) 922-2981, Fax (319) 922-2700 Website: www.paladinbrands.com

Vibratory Compactor Model 500B, 1000B

Allied Construction Products, LLC 3900 Kelly Avenue Cleveland, OH 44114 Tel: (404) 435-6947, Fax: (216) 431-2601 Website: hppt://www.AlliedCP.com

Flail Mower Model 30EX

Rockhound Attachments PO Box 220 Hughson, CA 95326 Tel: (800) 426-5615, Fax (360) 230-2322 Website: www.rockhound.com

Available from Parts 70000-73274 Block Heater Kit


KUBOTA




KX080-4 ExcavatorTight Tail Swing Utility Class Excavator

FEATURES ENGINEEco Plus System V3307 Kubota DI CRS Turbo Tier 4 Diesel Engine Auto Idler 4 Cylinder, 4 Cycle Rubber Or Steel Track Models 67.3 Net HP @ 2000 rpm Air Conditioned ROPS/OPG (Top Guard, Level I) Cab Cloth Suspension Seat OPERATIONAL DIMENSIONS Kubota 3 Hydraulic Pump Load Sensing System Max Digging Depth 15’ 1” 1 Gear, 2 Variable Displacement Pumps Max Digging Radius @ Ground Level 23’ 6.3” All Controls Hydraulic Pilot Controls Max Vertical Digging Depth 12’ 7.6”Two Operating Pattern Selection System Max Dumping Height 17’ 2.7” Accumulator Standard Front Dozer Blade w/ Float DOZER BLADE DIMENSIONS Optional Float Angle Blade w/ Bolt-on Cutting Edge Width 86.6” 360 Degree Full Rotation Height 19.7” 70 Degree Left, 60 Degree Right Boom Swing Lift Above Ground 19.7” 17.6 gpm Adjustable Auxiliary Hydraulics Port 1 Drop Below Ground 19.7” 26.4 gpm Adjustable Auxiliary Hydraulics Port 2 Thumb Bracket and Relief Valves PERFORMANCE Five Second Quick Preheat System Digging Force @ Bucket (K7427) 14,660 lbs.Key Switch Stop System Digging Force @ Dipper Arm 8,554 lbs. Half Pitch Rubber Tracks Travel Speed (Low) 1.7 mph Self-Bleed Fuel System Travel Speed (High) 3.1 mph Auto-Downshift Two Speed Travel System Climbing Ability 36% / 20° Swivel Negative Brake Lift Capacity 6,500 lbs. Travel Negative Brake Over Front Third Line Blade Grounded 4.0 Ft. Load Point Height 12.0 Ft. Load Radius BASIC UNITS KX080-4R3, Rubber Tracks, Air Conditioned DIMENSIONS AND OPERATING WEIGHT ROPS/OPG (Top Guard, Level I) Cab, Dozer Blade, KX080-4R3, Rubber Tracks, Air Conditioned ROPS/OPG Dipper Arm, Counter weight (Top Guard, Level I) Cab, Dozer Blade, Dipper Arm, KX080-4R3A, Rubber Tracks, Air Conditioned Counter weight ROPS/OPG (Top Guard, Level I) Cab, Angle Dozer Overall Length 21’ 1.9” Blade, Dipper Arm, Counter weight Overall Width 7’ 2.6” KX080-4S3, Steel Tracks, Air Conditioned Overall Height 8’ 4” ROPS/OPG (Top Guard, Level I) Cab, Dozer Blade, Operating Weight* 18,280 lbs. Dipper Arm, Counter weight Ground Clearance 15.4” KX080-4S3A, Steel Tracks, Air Conditioned ROPS/OPG (Top Guard, Level I) Cab, Angle Dozer KX080-4S3, Steel Tracks, Air Conditioned ROPS/OPG Blade, Dipper Arm, Counter weight (Top Guard, Level I) Cab, Dozer Blade, Dipper Arm,KX080-4W3, 24” Wide Steel Tracks, Air Conditioned Counter weight ROPS/OPG (Top Guard, Level I) Cab, Wide Dozer Overall Length 21’ 1.9” Blade, Dipper Arm, Counter weight Overall Width 7’ 2.6” Overall Height 8’ 4” Operating Weight* 18,390 lbs. Ground Clearance 15.4” * Includes operator’s weight, 175 lbs.





19,140 $112,300.00 With:

K7414A 539 $2,660.00 $114,960.00

KX080-4S3 Excavator Basic Unit 18,390 $107,000.00

K7402 140 $1,560.00 K7434A 527 $2,610.00 K7405 370 $4,083.00

$115,253.00

Counterweight

QUICK COUPLER

Dipper arm

36” 12.1 cu. ft. Pin-on TRENCHING BUCKET

36” 12.1 cu. ft. TRENCHING BUCKET

ATTACHMENTS:

Steel Tracks (450 mm, 17.7”)

Excavator Basic UnitRubber Tracks

Angle Dozer BladeAir Conditioned ROPS/OPG (Top Guard, Level I) Cab



KX080-4R3A

HYDRAULIC THUMB

Dozer Blade

STANDARD UNIT KX080-4R3A COMPLETE ORDER AND PRICE

STANDARD UNIT KX080-4S3 COMPLETE ORDER AND PRICE

With:

ATTACHMENTS:

DESCRIPTION

BASIC UNIT:

BASIC UNIT:



STEP 1)

Select from Part 1 the Basic Unit that fits your needs. For example, choose a KX080-4R3A and get: Base model, rubber tracks, air conditioned ROPS/OPG (Top Guard, Level I) cab, angle dozer blade, dipper arm, and counterweight.


(SAMPLE ORDER)





PART 1KX080-4R3 18,280 $107,000.00

With:

KX080-4R3A 19,140 $112,300.00

With:

KX080-4S3 18,390 $107,000.00 With:

KX080-4S3A 19,250 $112,300.00 With:

KX080-4W3 18,670 $110,700.00 With:

PART 2 BUCKETS

K7416 405 $1,674.00

K7417 460 $2,150.00

K7418 505 $2,387.00

K7419 539 $2,660.00

K7436 565 $2,474.00

K7437 615 $2,586.00

K7438 665 $2,656.00

K7402 140 $1,560.00

K7407 139 $429.00

DESCRIPTION

EXCAVATOR BASIC UNIT

Steel Tracks (450 mm, 17.7”), EXCAVATOR BASIC UNIT



30 inch 10.8 cu. ft. TRENCHING BUCKET


48 inch 10.8 cu. ft. GRADING BUCKET

Wide Steel Tracks (600 mm, 24”),



QUICK COUPLER


Rubber Tracks, Air Conditioned ROPS/OPG (Top Guard, Level I) Cab, Angle Dozer Blade, Dipper Arm, Counterweight

Air Conditioned ROPS/OPG (Top Guard, Level I) Cab, Dozer Blade, Dipper Arm, Counterweight

Air Conditioned ROPS/OPG (Top Guard, Level I) Cab, Angle Dozer Blade, Dipper Arm, Counterweight

Air Conditioned ROPS/OPG (Top Guard, Level I) Cab, 92.5” Wide Dozer Blade, Dipper Arm, Counterweight

Includes two mounting pins, 1 locking pin, and


contour required.

hardware.


BUCKET HANGERS

coupler style. Modification to match bucket


Set of two ear blanks. Converts buckets to quick


Steel Tracks (450 mm, 17.7”), EXCAVATOR BASIC UNIT

Rubber Tracks, Air Conditioned ROPS/OPG (Top Guard, Level I) Cab, Dozer Blade, Dipper Arm, Counterweight





PART 2

K7426 393 $1,804.00

K7427 448 $2,148.00

K7428 493 $2,336.00

K7429 527 $2,610.00

K7441 553 $2,418.00

K7442 603 $2,530.00

K7444 850 $7,456.00

K7443 652 $2,626.00

K7448 500 $2,227.00

K7451 79 $162.00

K7452 89 $185.00

K7453 109 $202.00

PART 3

K7405 370 $4,083.00

KXB600F 875 $13,500.00

KXB860Q 1,110 $16,000.00

K7477A 16 $787.00

K7475 175 $1,372.00

K7476 160 $1,338.00

K7993 95 $1,338.00

BOLT-ON CUTTING EDGE

K9857 Additional Weight Kit required with K7405 Thumb applications





DESCRIPTION

54 inch 9.6 cu. ft. TILT GRADING BUCKETIncludes hoses and fittings. Tilts 45° each direction


Includes manual, one moil point and one chisel point. Requires a K7477A hose kit, and a K7475 or K7476 mount bracket

Includes manual, one moil point and one chisel point. Requires a K7477A hose kit, and a K7993 mount bracket

HYDRAULIC BREAKER, 1,200 ft. lbs. rated


configuration

Required for all KXB600F and KXB860Q installations


K7402 quick coupler required

For K7438, and K7443 60” grading bucketsBOLT-ON CUTTING EDGE

For K7436 and K7441 48” grading buckets


60 inch GRADING BLADE


For K7437, K7442, and K7444 54” grading buckets



Required for KXB600F Quick Attach configuration

BOLT-ON CUTTING EDGE


ATTACHMENTS


Required for KXB600F Pin-On



HYDRAULIC THUMB KIT

QUICK ATTACH BUCKETS (continued)





PART 3

K7773 5 $985.00

K7449 300 $3,220.00

K4080 1400 $17,372.00

K4081 380 $610.00

K7462 533 $3,880.00

K7463 555 $3,719.00

K7464 720 $4,252.00

K7465 707 $3,872.00

K7467 315 $1,400.00

K7466 295 $1,346.00

K7468 1015 $6,250.00

K7471 980 $5,670.00

K7472 960 $5,670.00

K7482A 1877 $6,820.00

K7483A 300 $7,405.00

K7446 48 $420.00

K7445 1 $83.00

K7459 440 $1,060.00

REPLACEMENT BLADE KIT FOR K4080 SHREDDER


EXCAVATING RAKE, 36”, Pin-on

EXCAVATING RAKE, 36”, Quick Attach

FLAIL BRUSH SHREDDER

Additional Weight Kit

STEEL CRAWLER KIT (600 mm, 23.6”)

DOZER BLADE EXTENSION KITKit consists of left / right blade extensions, two tie down labels, and an Installation Manual. The extensions are welded to the dozer blade to match the width of the K7483A Steel Track Conversion Kit.

TRAVEL ALARM KIT

EXCAVATING RAKE, 48”, Pin-on

EXCAVATING RAKE, 48”, Quick Attach

FROST RIPPER, 24”, Pin-On

FROST RIPPER, 24”, Quick Attach

SOLID TINE GRAPPLE, 36”, Pin-on

COMPACTION WHEEL, 18”, Pin-On

COMPACTION WHEEL, 18”, Quick Attach

STEEL CRAWLER KIT (450 mm, 17.7”)Convert tracks from rubber to steel

Bolts on to the existing counter weight. Increases minimum tail turning radius from 4’ 9.5” to 4’ 11”


Brush Guard Kit

Convert tracks from rubber to steel. The K7446 weld-on dozer blade extensions are recommended for theK7483A. Not authorized for angle blade models

ATTACHMENTS (Cont.)


Quick coupler mount, integrated thumb saddle, hoses, hydraulic quick couplers, safety chain debris deflector guards, manual

DESCRIPTION





PART 4K7469 463 $8,850.00

V4218A 3 $176.00

K7804 6 $489.00

K9943A 3 $78.00

E9299A 4 $310.00 AM/FM Radio with MP3 Port and 7-Channel Weather Band. The antenna, two speakers and harness come already preinstalled in the cab





RADIO OPTION


STROBE LIGHT KIT


ARM REST KITFor excavators serial number 10000 and below. Standard equipment on excavators serial number 10001 and above.

DESCRIPTION



Earth Auger Model 1975

McMillen 503 Gay Street Delhi, IA 52223 (800) 922-2981 Fax (319) 922-2700

Vibratory Compactor Model 1000B

Allied Construction Products, LLC 3900 Kelly Avenue Cleveland, OH 44114 Tel: (404) 435-6947, Fax: (216) 431-2601 Website: http://www.AlliedCP.com

Rotary Grapple Model PC025B with RGP-252 Rotator Not authorized for use with hydraulic thumbs

Eastern & Central USA Tel: (503 444-2103 Fax: (603) 444-0327 [email protected] www.rotobec.com

Western USA Tel: (250) 765-1161 Fax: (250) 765-0035 [email protected] www.rotobec.com




KUBOTAK Series Replacement Engines



D722E3BH 220 $3,150.00

D722E3BH3 220 $3,150.00

D1105E2BH1 200 $3,867.00 D1105E3BH7 200 $3,983.00

D902EBH 200 $2,570.00 D902E2BH1 200 $3,449.00 D902E3BH 200 $3,553.00

D902E3BH3 TBA TBAD902E4BH2 200 $3,565.00

D782E2U15 200 $3,615.00 D782E3BH4 200 $3,431.00 D902E3BH2 200 $3,553.00

D1105E2BH6 200 $3,971.00

D1105E3U25 240 $3,983.00

V1505E2BH3 300 $4,255.00 V1505E3BH 300 $4,472.00 V1505E4BH1 300 $4,610.00

V1505E2BH7 300 $4,494.00 D1503M2BH2 441 $4,598.00 D1703E3BH2 441 $5,164.00 D1703E3BH1 431 $5,200.00

D1703T4BU1 440 $4,870.00 D1703T4BU2 440 $4,870.00

V2203E2BH4 300 $4,807.00 V2203M2BH2 300 $5,225.00 V2203M2B3N 300 $5,003.00 V2203E3BH2 440 $5,200.00

D1803E4BH1 610 $9,380.00 D1803E4BH2 610 $9,380.00

V2203E3BH3 440 $5,200.00 V2203E3BH1 440 $5,200.00

V2203M2BH2 512 $5,225.00 V2403E3BH1 440 $5,408.00 V2403E3BH2 440 $5,408.00

V2607DIE3B 610 $6,700.00 Interim Tier 4

Replacement engine for U15 Tier 4

Replacement engine for KX41-3 Tier 4


Replacement engine for KX91-2/S Tier 2


Replacement engine for K008-3 Tier 4

DESCRIPTION

Replacement engine for KX71-3S4 Tier 4

Replacement engine for KX121-3S with AC Tier 2Replacement engine for KX121-3S AC Interim Tier 4

Replacement engine for KX040-4 cab models Tier 4

Replacement engine for U45-3S AC Interim Tier 4


Replacement engine for U45S-3S Canopy Interim Tier 4

Replacement engine for U35S2 Interim Tier 4

Replacement engine for KX121-2/S Tier 2Replacement engine for KX121-3S Tier 2

Replacement engine for KX161-3S AC Interim Tier 4Replacement engine for KX161-3S Canopy Interim Tier 4

Replacement engine for U35-4 canopy models Tier 4Replacement engine for U35-4 cab models Tier 4

Replacement engine for KX040-4 canopy models Tier 4

Replacement engine for K008 Tier 4

Replacement engine for KX91-3/U35 Tier 2Replacement engine for KX91-3S2


Replacement engine for U25-3S Tier 4

Replacement engine for KX61-2/S Tier 2

Replacement engine for KX41-2/SV Tier 2Replacement engine for KX41-2 Tier 4

Replacement engine for KX41-3


Replacement engine for KX057-4 & U55 canopy models

Replacement engine for KX71-3S Interim Tier 4

Replacement engine for KX018-4 Tier 4 S/N above #40442Replacement engine for KX018-4 Tier 4 S/N 40441 and below


KUBOTAK Series Replacement Engines



V2607DIE3H 610 $6,700.00 Interim Tier 4

V2607E4BH1 610 $11,400.00 models Tier 4

V2607E4BH2 610 $11,400.00 models Tier 4

V38DIE2BH 613 $7,505.00 V3307DT3BH 610 $8,500.00 V3307TE4BH 610 $12,980.00


Replacement engine for KX057-4 & U55-4 cab


Replacement engine for KX057-4 & U55-4 canopy

DESCRIPTION

Replacement engine for KX057-4 & U55 cab models



Section 11 03-17-2014 NN Tail Swing D902 Kubota E-TVCS Tier 4 Diesel Engine Rubber Track Model,...

Documents

Transcript of Section 11 03-17-2014 NN Tail Swing D902 Kubota E-TVCS Tier 4 Diesel Engine Rubber Track Model,...