SECO-LARM 2011 Condensed Catalog Ver.B4B

2

*

*

*

*

*

*

*

*

*

~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

SK-910RBQ

SK-910RA, SK-910RAV

External or internal battery power. External or internal triggering. Use to make almost any security output wireless. Other specifications similar to SK-919TD1S-UP.

SK-919TDWS-BU

SK-910RBQ 11~24 VAC/VDC, 10A@24VDC relay output.SK-910RA Mini size, 11~24 VAC/VDC, 3A relay output.SK-910RAV Mini size, 3~13.8 VDC, 5A transistor ground output.

SK-919TD1S-UP Factory pre-coded.

SK-919TT1S-BU DIP switch coding.

Sample Application:Make push-to-exit plate or keypad wireless.

Leather pouch for SK-919TD1S-UP & SK-919TT1S-BU.

Control garage doors, house lights, etc. Output is programmable for 4sec momentary

(default), 1sec momentary, toggle, or validity. (SK-910RBQ also features a latching mode.)

LED indicates RF reception, learn mode entered, transmitter learned, memory cleared.

Over 68 billion possible codes. LED transmission indicator.

SK-910RAV2SK-910R2Q

SK-910RB2Q 11~24 VAC/VDC, 2 x 10A@24VDC relay outputs.SK-910RAV2 Mini size, 3~13.8 VDC, 2 x 3A transistor ground outputs.

SK-919TD2A-UP Factory pre-coded. Over 68 billion possible codes.SK-919TD2A-U Uncoded. Over 68 billion possible codes.SK-917T2A-U CODEBUMP™ codehopping technology, 18 quintillion codes.

SK-915BA12VDC Battery for all transmitters except handheld.

Each output independently configurable (SK-910RB2Q only).

Outputs are programmable for 4sec momentary (default), 1sec momentary, toggle, latch, or validity. (SK-910RB2Q also features a latching mode.)

Two LEDs indicate RF reception, learn mode entered, transmitter learned, memory cleared.

SK-910R4Q 11~24 VAC/VDC, 4 x 10A@24VDC relay outputs.

SK-919TP4J-NU Factory pre-coded. Over 68 billion possible codes.

SK-917TP4J-NU CODEBUMP™ codehopping technology, 18 quintillion codes.

LED transmission indicator.

Control garage doors, house lights, etc. Outputs are programmable for timed

(1, 2, 3, 4, 5, 10, 30, and 60 seconds), toggle, latching, or validity modes.

Four LEDs indicate RF reception, learn mode entered, transmitter learned, memory cleared.

Extreme durability ¯ Rubber buttons eliminate damage caused by electrostatic discharge. Gold-plated battery clips and contact points extend the life of the transmitter.

Includes two 3VDC lithium batteries and visor clip. Slimline design: 31/2”x23/16”x1/2” (89x56x12 mm).

SK-919TP1H-BU --- 1 Button, 1 ChannelSK-919TP2H-NU --- 2 Buttons, 3 ChannelsSK-919TP4H-NU --- 4 Buttons, 15 Channels

SK-9HBCBelt-clip holster for slimline handheld transmitters.

X-930-0893VDC Lithium battery for handheld transmitters. Belt-Clip Holster

Battery

SK-91ERSD Up to 1,000ft (300m) range max.

Extends the range of SECO-LARM RF receivers. Plugs into the receiver.

SK-915LP

Similar to SK-910RBQ, but 433.92MHz. SK-910R-4Q

SK-939TS1S-B Same as SK-919TT1S-BU,

but 433MHz.

SK-910R2-4Q Similar to SK-910RB2Q, but 433.92MHz.

SK-910R4-4Q Same as SK-910R4Q, but 433.92MHz.

SK-939TS4J-NU Same as SK-919TP4J-NU, but 433.92MHz.

SK-939TS2A-PQ Same as SK-919TD2A-UP, but 433.92MHz.

315MHz

Up to500ft

SK-910RC4Q 5 Relay Outputs Four relays, one per channel, each 10A@24VDC.

Outputs are programmable for timed (1, 2, 3, 4, 5, 10, 30, and 60 seconds), toggle, latching, or validity modes.

Auxiliary 12VDC relay output (wet contact): 1sec~10min adjustable via built-in potentiometer.

Compatible with all SECO-LARM 315MHz transmitters.

Optional central receiver accessories include: Weatherproof transmitter (SK-919TPWFEUQ). Wireless magnetic contacts (SM-93T19Q). Wireless PIR sensor (E-9908-1T19Q).

See Page 3 for additional information regarding the above products.

315MHz

Up to500ft

315MHz

Up to500ft

315MHz

Up to500ft

315MHz

Up to500ft

315MHz

Up to500ft

315MHz

Up to500ft

315MHz

Up to500ft

315MHz

Up to500ft

*Actual range may vary greatly depending on the installation and operating environment.

315MHz

Central Receiver

1-Button Transmitters

Slimline Handheld TransmittersWired 1-Button Transmitter

Extended Range Antenna



1-Channel Receivers 2-Channel Receivers 4-Channel Receivers

2011 Condensed Catalog

3

*

*

*

For remote activation of locks, cameras, etc. from a desk or other location.

Use in offices, factories, etc. Portable, attractive, heavy-duty aluminum

case. Includes rechargeable battery and power adapter. Compatible with all SECO-LARM 315MHz receivers.

EVP-1SA4P4UL 4 Outputs, 4A Continuous, PTC Fuses

EVP-1SA4P9UL 9 Outputs, 4A Continuous, PTC FusesEVP-1SA8P16UL 16 Outputs, 8A Continuous, PTC Fuses

EVP-1SD2P4UL 4 Outputs, 2A Continuous, PTC Fuses



EVP-1SD2B4ULQ 4 Outputs, 2A Continuous, Blade-Style Fuses

EVP-1SD4B9ULQ 9 Outputs, 4A Continuous, Blade-Style Fuses

EVP-1SD6BHULQ 16 Outputs, 6A Continuous, Blade-Style Fuses

Individual red status indicator LEDs for each output. Includes enclosure, power cord, and transformer. Output voltage adjustable to compensate for

voltage drop. Output fuses rated 1.1 Amp for PTC, 1 Amp for blade. Main power switch to turn on/off power to outputs. Built-in backup battery charger. Power Distribution Board also available. See pg. 16.

EVP-124M6P16Q 16-Output CCTV Power Supply, 6A Continuous

Individual status LEDs. Individually protected

PTC-type fused outputs.

SK-919TP2D-P2-Button Desktop Transmitter

SK-919TP2D-F2-Button Footswitch Transmitter

Individual red status indicator LEDs for each output. Main power switch with surge protection. Includes enclosure and transformer. Output voltage adjustable to compensate for

voltage drop. Output fuses rated 1.1 Amp. Main power switch to turn on/off power to outputs. Power Distribution Board also available. See pg. 16.

PH-A1612-GUQ16-CH, 12A Continuous, Glass Fuses

PH-A1612-PUQ16-CH, 12A Continuous, PTC FusesPH-A3224-GUQ32-CH, 24A Continuous, Glass Fuses

PH-A3224-PUQ32-CH, 24A Continuous, PTC Fuses

Field-selectable 24 or 28 VAC outputs, or OFF. Output fuses rated at 3 Amp per channel. Glass fuses conveniently accessible from the front

panel (PH-A1612-GUQ and PH-A3224-GUQ). Dual-color LED status indicator for each output

(Blue --- normal, Red --- fault, OFF --- not in use). Removable terminal blocks for easy wiring. Rack, wall or desk (stackable) mountable. Built-in surge protection. Dimensions (excluding bracket):

13/4”x171/2”x113/8” (44x445x289 mm).

Monitors up to two zones per premises or vehicle, plus manual paging.

Connect to burglar or communications panels.

Range: Up to 1 mile (1.6km). Includes belt-clip

vibrating receiver (E-35RV).

SECOPAGE 35EV

E-35RV Spare receiver. Built-in audible & vibrating

function for silent paging.

E-35ANT-A Use as alternative to AM or CB antenna.

Blade-Style or PTC Fuses

Available!

Individual red status LEDs for each output. Output fuses rated 3A@250VAC. Output adjustable to compensate for voltage drop. Main power switch with surge protection. Maximum 9 Amp continuous output current.

PS-D1610-BUQ16 Outputs, 9A Continuous, Blade-Style Fuses

PS-D1610-PUQ16 Outputs, 9A Continuous, PTC-Style Fuses

8 Outputs are 12VDC. 8 Outputs are 24VAC. Extra-large enclosure. For small CCTV

power supply case.

EVP-RMB-AQ

For large CCTV power supply case.EVP-RMB-BQ

315MHz

SK-919TPWFEUQWeatherproof Transmitter

Similar to the SK-919TDWS-BU. With terminal blocks. Weatherproof IP65. Indoor/outdoor use.

E-9908-1T19QWireless PIR Sensor

20ft Sensing range. Pet immunity.

Up to500ft

315MHz

Up to500ft

*Actual range may vary greatly depending on the installation and operating environment.

SM-93T19QWireless Magnetic Contacts

Weatherproof IP66. Indoor/outdoor use.

PS-U0405-PUQ4 Outputs, 5A Continuous, PTC FusePS-U0905-PUQ9 Outputs, 5A Continuous, PTC FusePS-U1806-PUQ18 Outputs, 6A Continuous, PTC Fuse

Switched mode provides greater efficiency. Reduced heat extends the life of your power supply. Lightweight. Ultra-low ripple voltage for improved image quality. Output fuses rated 2.5 Amp for PTC.

27MHz

www.seco-larm.com

RF Wireless Controls

24VAC CCTV Power Supplies

12VDC/24VAC CCTV Power Supply

12VDC CCTV Power Supplies

Rack-Mount CCTV Power Supplies

Central Receiver Accessories

High-Amp DC Power Supplies

Alarm Pager System

Rack-Mount Brackets

Switching CCTV Power Supplies

Power Distribution Boards (See Pg. 16)

4

Series

Series

Series

True Day/Night Operation. 1/3” Sony Super HAD CCD. 600 TV Lines. IR cut filter. 2.8~10.5mm F1.2 Tamron lens. Flush or surface mount. Service monitor port for convenient installation. OSD (On-Screen Display) with remote. Advanced 256x DSS (Digital Slow Shutter). DNR (Digital Noise Reduction).

1/3” Sony Super HAD CCD. 360° Triple-axis rotation. Heavy-duty, vandal-resistant. Cables concealed in bracket

to prevent tampering. Ceiling and wall brackets

available.

Sony 1/3” Super HAD II CCD. 360° Triple-axis rotation. Heavy-duty, vandal-resistant. Cables concealed in bracket

to prevent tampering. Ceiling and wall brackets

available.

EV-122C-DVB3Q 3.6mm Lens, GrayEV-122C-DVH3Q 3.6mm Lens, WhiteEV-122C-DVAVQ 4~9mm Lens, GrayEV-122C-DVHVQ 4~9mm Lens, White

Wide Dynamic Range. 540 TV Lines. 2.8~11mm Varifocal lens. OSD & included remote control.

EV-2625-NKEQ

EV-2636-NKEQ

Ceiling and wall brackets available for the two cameras above.

EV-2706-N3GQ 3.6mm Lens, GrayEV-2706-N3WQ 3.6mm Lens, WhiteEV-2706-NFGQ 4~9mm Lens, GrayEV-2706-NFWQ 4~9mm Lens, White

EV-2646-NKGQ 2.8~12mm Lens EV-2656-NKGQ 2.8~12mm Lens with 3DNR

1/3” Sony Super HAD CCD. 550 TV Lines. DNR (Digital Noise Reduction)

for clear image in low light. 42 IR LEDs. EV-2656-NKGQ incorporates OSD

(On-Screen Display) for easy programming and DWDR (Digital Wide Dynamic Range) for clear images under strong backlighting.

Advanced 256x DSS (Digital Slow Shutter).

360° 3-Axis rotation. Dual voltage: 12VDC or 24VAC. Easy adjustment of zoom and focus.

1/3” Sony Super HAD CCD. 2.8~10.5mm Tamron F1.2 Varifocal lens. 12VDC. Service monitor port.

EV-2660-NKBQ

CDS Auto Switch True Day/Night and IR cut filter.

Dual voltage: 12VDC/24VAC.

EV-2660-NKBAQSame as EV-2660-NKBQ, but with:

36 IR LEDs.

EV-2661-NKBQSame as EV-2660-NKBAQ, but with:

EV-2221-N3BQ 3.6mm Lens, 420TVLEV-2801-N3BQ 3.6mm Lens, 540TVLEV-2221-NKBQ 2.8~11mm Lens, 420TVLEV-2801-NKBQ 2.8~11mm Lens, 540TVL

EV-2125-N3WQ 3.6mm Lens, White

1/3” Sony Super HAD II CCD. 420 TV Lines. Small size:

3” (76mm) diameter. Low current draw: 100mA@12VDC.

1/3” Sony Super HAD CCD. 18 IR LEDs, up to 50ft (15m) range. Tamper-resistant design. Day/Night operation.

EV-2806-NMMQ 1/3” Sony Super HAD CCD. 2.8~12mm Lens. 540TVL. Dual voltage: 12VDC/24VAC. Digital Noise Reduction. OSD (On Screen Display). 360° 3-Axis gimbal. Digital Wide Dynamic Range

for specific light conditions. 33 IR LEDs. Gray base with interchangeable black and

white covers included.

1/3” Sony Super HAD II CCD. Heavy-duty, vandal-resistant

design. Dual voltage: 12VDC/24VAC. Low current draw: 280mA. Size: 51/2”x41/2” (140x115 mm). 18 IR LEDs.

EV-2186-NKEQ 2.8~11mm, 420TVLEV-2786-NKEQ 2.8~11mm, 540TVL

EV-2166-N3WQ 3.6mm, 420TVL, 18 LEDs EV-2766-N3WQ 3.6mm, 540TVL, 18 LEDs EV-2166-NVWQ 4~9mm, 420TVL, 21 LEDs EV-2766-NVWQ 4~9mm, 540TVL, 21 LEDs

1/3” Sony Super HAD II CCD. Heavy-duty, vandal-

resistant design. 12VDC. Low current draw: 200mA. Size: 41/4”x31/2” (108x85 mm).

1/3" Sony CCD. 3.6mm Lens. 420 TV Lines. 24 IR LEDs, 50ft (15m) range.

EV-122C-DXB3Q

EV-2240-N3BQ 3.6mm Lens, 1/3”. Excellent daytime dynamic range. 480 TV Lines provide a crisp, clear

image.

3.7mm Pinhole lens. 1/3” Sony Super HAD CCD. 420 TV Lines. No exposed screws. Small size: 3”x115/16” (77x49 mm). Low-profile design, extends outward only 1”.

EV-122C-FVB3Q

EV-2845-N2EQ Ultra small size. 2.3mm Lens. 580 TV Lines. Housing can be surface

or flush mounted. Built-in DSS and DNR deliver

superior nighttime performance.

Weatherproof

for outdoor useIP66

Weatherproof

for outdoor useIP65

Weatherproof

for outdoor useIP66

Weatherproof

for outdoor useIP67

Weatherproof

for outdoor useIP66

Weatherproof

for outdoor useIP65

Weatherproof

for outdoor useIP65

Weatherproof

for outdoor useIP67

Weatherproof

for outdoor useIP66

Note: Model numbers that end with “Q” or products that have a round green “Q” sticker signify RoHS-compliant products.

Ball-Mount Dome Cameras (420TVL)

Armored Ball Turret Cameras

Ball-Mount Dome Cameras (540TVL)

Indoor 3-Axis Varifocal Domes (550TVL)

Indoor IR Dome Cameras

Mini Vandal Dome Camera

Vandal Varifocal Domes

DNR/DWDR/IR Vandal Dome Camera

Large Vandal IR Dome Cameras

Mid-Size Vandal IR Dome Cameras

Indoor IR Ball-Mount Camera

Indoor Dome Camera

Flush-Mount Ball “UFO” Camera

Wide-Angle Mini Dome Camera


36-LED Day/Night Cameras

5

Series

Series

VB-CF1Q Bracket for connecting IR camera

with IR illuminators.

VI-B1005-SAQ 24-LED IR illuminator. Works with most IR CCTV cameras.

1/3” Sony Super HAD CCD. Split-glass design

eliminates IR reflection. Low current draw

(250mA@12VDC with IRs on).

1/3” Sony Super HAD CCD. Split-glass design

eliminates IR reflection. Low current draw

(280mA@12VDC with IRs on).

EV-1026-N2SQ 2.9mm LensEV-1026-N3SQ 3.6mm LensEV-1026-N6SQ 6mm Lens

EV-1606-N2SQ 2.9mm LensEV-1606-N3SQ 3.6mm LensEV-1606-N6SQ 6mm Lens

1/3” Sony Super HAD CCD. 550 TV Lines. Dual voltage: 12VDC/24VAC. Advanced 256x Digital Slow Shutter. OSD (On-Screen Display) for easy programming. DWDR (Digital Wide Dynamic Range) for clear images

under strong backlighting. DNR (Digital Noise Reduction) for clear images

in low light. Cable concealed in the bracket for extra security. Low current draw (310mA with IR LEDs on). 14 IR LEDs for clear images in total darkness.

EV-1626-NKGQ 2.8~12mm, 14 IR LEDs EV-1626-NWGQ 6~50mm, 14 IR LEDs

50ft Range24 LEDs

1/3” Sony Super HAD II CCD. 36 IR LEDs, 100ft (30m) range. Cable concealed

in bracket for extra security.

EV-1146-N6SQ 6mm Lens, 420TVLEV-1646-N6SQ 6mm Lens, 540TVL

EV-1665-N2BQ 1/3” Sony Super HAD II CCD. 2.2mm Lens (170° viewing angle). 550 TV Lines.

EV-1636-NLGQ 3.5~16mm, 42 IR LEDs

EV-1636-NWGQ6~50mm, 60 IR LEDs

1/3” Sony Super HAD CCD. Third-generation DSP chip. 600 TV Lines. Dual voltage: 12VDC/24VAC. Advanced 256x DSS (Digital Slow Shutter). OSD (On-Screen Display)

for easy programming. DNR (Digital Noise Reduction)

for clear images in low light. Programmable 8-zone privacy settings. Cable concealed in the bracket for extra security. IR LEDs for clear images in total darkness.

EV-7105-NPEQ 500TVL Color, 570TVL B/W

1/4” Sony Super HAD CCD. 3.8~45mm Varifocal lens. 10X Optical zoom & 10X digital zoom. Day and night function. Max. 360° per sec. high-speed pan/tilt motion. Program up to eight sets of repetitive motions

between two preset positions. Program up to four different movement patterns. Advanced 128x DSS (Digital Slow Shutter). 24VAC Operation. 127 Preset viewing positions. For outdoor use, includes wall-mount bracket. White housing.

EV-1125-NVBQ 1/3” Sony CCD. 4~9mm Lens. 420 TV Lines. Low current draw: 160mA.

50ft Range24 LEDs

EV-1324C12 1/4” Sharp CCD. 3.6mm Lens. 380 TV Lines.

EV-5120-N3WQ 3.7mm Pinhole lens

(78° viewing angle). 1/3” Sony Super HAD II CCD. 420 TV Lines. 12VDC. Low current draw: 200mA.

EV-4605-N2SQ 2.3mm LensEV-4606-N2SBQ 2.3mm Lens, 30 LEDs

1/3” Sony Super HAD II CCD. 550 TV Lines. 2.3mm Lens,

160° viewing angle. EV-4606-N2SBQ is similar

to EV-4605-N2SQ, but includes 30 IR LEDs.

EV-5105-N3SQ 1/3” Sony Super HAD CCD. 550 TV Lines. 3.6mm Lens. Rugged, heavy-duty design suitable

for industrial applications.

EV-6100-N2SQ Camera is mounted behind

a one-way observational mirror, combining two forms of visual protection.

1/3” Sony Super HAD CCD. 420 TV Lines. 2.9mm Lens. 12VDC Operation.

Weatherproof

for outdoor useIP66

Weatherproof

for outdoor useIP66

Weatherproof

for outdoor useIP66

Weatherproof

for outdoor useIP66

Weatherproof

for outdoor useIP66

Weatherproof

for outdoor useIP66

Weatherproof

for outdoor useIP66

Weatherproof

for outdoor useIP66

Weatherproof

for outdoor useIP66

www.seco-larm.com

IR Illuminator

24-LED Day/Night Cameras (420TVL)

Mini DNR/DWDR/IR Cameras Wide-Angle Bullet Camera

DNR IR Bullet Cameras Mini PTZ Camera

Varifocal Bullet Camera

Bullet Camera

PIR Camera

Corner-Mount Cameras

Discreet Wall-Plate Camera

Surveillance-Mirror Camera

24-LED Day/Night Cameras (540TVL)

6

Transmits a monochrome video signal up to 2,000ft (610m) or color up to 1,300ft (400m).

Video, power, and data over Cat5e/6.

Built-in multi-color LED indicates AC or DC power and polarity.

Removable terminal blocks.

2,000ft (610m) Video range. Built-in power converter

similar to ST-LA105-TTQ (see page 14).

Built-in dual-color LED indicates power & polarity.

Built-in DC-plug power connector & data wire.

DR-104-250Q --- 4-Channel, 250GB HDDDR-108-250Q --- 8-Channel, 250GB HDDDR-116-500Q --- 16-Channel, 500GB HDD

Operation: Live/Playback, Record, Network. Dual-CODEC for H.264. Two USB 2.0 ports. Motion detection. Video input x 4, 8, or 16 (BNC). Alarm detection: NO/NC, programmable. Motion detection: 16x12 detection grid. Remote access via PC, Mac®, or smartphones such

as iPhone®, Android™, and Windows Mobile. Up to 240PPS recording for DR-108-250Q and

DR-116-500Q. Up to 120PPS recording for DR-104-250Q. Free DDNS server. Includes free CMS software. Dual-stream support for simultaneous remote access

at low bandwidth. Remote live view, PTZ control, configuration,

backup, and playback anywhere in the world via Internet Explorer.

E-mail event notification with optional video attachment. EZ Copy--- Simple one-button video export. Supports internal SATA DVD/RW or hard drive. VGA and BNC video outputs. One audio input per video input channel. Multi-language OSD manual. U.S.-based tech support. 3-Year warranty, including hard drive. Rack mount, wall mount, or stackable.

Optional Accessories:DRA-BAQ – Alarm Input BoardDRA-RBQ – Rack-Mount BracketsDRA-RMQ – Spare IR RemoteDRA-PAQ – Alarm Input Pigtail*DRA-PSQ – Audio Input Pigtail**Note: These pigtails are for use with DR-108-250Q or DR-116-500Q only.

EVT-PC4-VT2Q 4-Port Video Balun Card

The ENFORCER DR-100 series of Network H.264-based DVRs are the perfect units to go with other ENFORCER rack-mount CCTV products or with any CCTV system.

EVT-PC4P-JTQ

Connects up to four CCTV cameras (per PCI card) to a central location using low-cost Cat5e/6 UTP cable.

Range: Up to 2,000ft (610m).

Optional power- distribution card.

Includes a 12VDC, 4 Amp power adapter.

2,000ft (610m) Video range. Built-in voltage booster specs

similar to ST-HB105-TTQ (see page 14).

Compensates for DC voltage drops over long cable runs.

Input voltage: 7~24 VDC. Output voltage: 12 or 24 VDC (jumper selectable).

Vernier adjustment for each voltage. Output current: 500mA@12/24 VDC. Built-in dual-color LED indicates power and polarity. Built-in DC-plug power connector, data wire,

and BNC connector.

EVT-PB1-H05Q

EVT-PB1-31RQ

EVT-PB1-L05Q

EVT-PB1-318Q Same as EVT-PB1-31RQ, but with

RJ-45 jack instead of terminal block.

VC-1BAQ Converts almost any LCD

monitor into a security monitor. NTSC or PAL input. Video input auto-configure. On-screen display (OSD)

functions: color, contrast, tint, and brightness.

Desktop or wall mountable. Compact size, perfect for plug-and-play installation. Input connector: BNC. Output connector: VGA (DB15 VGA connector). 5VDC Power adapter included. Output: NTSC: 640x480, PAL: 768x576.

EVT-PB1-31RGQ Same as EVT-PB1-31RQ, but with a built-in ground

loop isolator.

EVT-PC8P-JTQ Same as EVT-PC4P-JTQ,

but with eight ports and 6 Amp adapter.

EVT-PC8-VTDQ Same as EVT-PC4-VT2Q,

but with eight ports.

Similar to EVT-PB1-L05Q, but with RJ-45 jack instead of terminal block.

EVT-PB1-L05AQ

Similar to EVT-PB1-H05Q, but with RJ-45 jack instead of terminal block.

EVT-PB1-H05AQ

Extend keyboard, mouse, camera or any USB devices over Cat5/ Cat5e/ Cat6. USB 1.1 compliant. Up to 150ft (50m) range,

or further with low-power devices. Small size, only 21/2”x17/16”x7/8” (64x37x22 mm)

excluding 9” (230mm) USB connection.

DE-S101Q

High resolution, up to 1280x1024 NTSC. BNC Pass-through output. Stores settings in case of power loss. Smaller size.

VC-3BAQ

VGA input resolution: Up to 1024x768. (DB15).

Ouput: Composite video (BNC connector), plus VGA pass-through (DB15).

VC-2VAQ Converts a VGA signal to composite video for viewing on any monitor or TV with a composite input.

Similar to VC-1BAQ, but with:

4-Port Power-Distribution Card Extend VGA range to 984ft (300m) over one Cat5e/6 cable.

For our full line of VGA baluns, please see pg. 17.

H.264 Network DVRs BNC to VGA Converters

Passive VPD Baluns w/ Voltage Converter

Passive VPD Baluns w/ Voltage Booster

Passive Video, Power, Data (VPD) Baluns

PCI Balun Hub Cards

USB Over Cat5e/6 (Passive)

VGA Baluns


VGA to BNC Converter

7

VG-1C12AQ

Gold-plated BNC connector. Passive operation --- No external power required. High immunity to interference --- Built-in

impedance-coupled device and noise filter. BNC terminals for easy installation.

EVT-PB1Q

EVT-PBP-V1TQ

EVT-PB1-V1TSQ

EVT-PB1-V1TGQ

Patent pending

Built-in surge protection. Gold-plated BNC connector. Screw terminals for

reliable installation. Transmits up to:

2,000ft (610m) B/W, 1,300ft (400m) color.

Gold-plated BNC connector. Built-in ground loop isolation. Removable terminal block. Built-in surge protection. Transmits color signal up to 984ft (300m).

EVT-PBM-V27Q

EVT-TB1-42TQ

EVT-PBM-V17Q

Active Video Balun Receiver

Active Video Balun Set Includes EVT-TB1-42TQ transmitter

and EVT-RB1-4T2Q receiver.

EVT-AB1Q

Up to 1.5mi (2.4km) with active transmitter. Video, data, and surge protection. Interlockable.

EVT-RB1-4T2Q

Up to 1.5mi (2.4km) with active receiver. Video, data, and surge protection. Interlockable.

Female gold-plated BNC, fits a 9/16"x5/8" hole in a single-gang plate.

Transmits up to 2,000ft (610m). RJ-45 Connection.

Male gold-plated BNC, fits a 9/16"x5/8" hole in a single-gang plate.

Transmits up to 2,000ft (610m). RJ-45 Connection.

Active Video Balun Transmitter

EVA-RS1 Connects up to 32 devices. Range: Up to 3,937ft (1,200m).

EVT-PH4-V2WOQ

Output: Four (4) RS-485 connectors.

Range: Up to 3,937ft (1,200m). Connect up to 64 cameras

or devices via RS-485.

RD-304-D1Q

Gold-plated BNC connector. Screwless terminal block for

easy installation. Transmits up to:

2,000ft (610m) B/W, 1,300ft (400m) color.

6” BNC Pigtail connector. Gold-plated BNC connector. Screw terminals for

reliable installation. Transmits up to:

2,000ft (610m) B/W, 1,300ft (400m) color.

EVT-PH16-4T2Q 16-Port Passive Balun Hub

Connect up to 16 CCTV cameras to a central location using low-cost Cat5e/6 UTP cable.

Works with all SECO-LARM baluns. Compact enclosure, only 1U (13/4”, 44mm) high. Mounts in a standard 19” rack, or stackable. Built-in transient surge protection and interference

technology for existing UTP cables. Gold-plated BNC connectors. Transmits up to: 2,000ft (610m) B/W,

1,300ft (400m) color.

EVT-AH16-VT2Q 16-Port Active Balun Hub

Rack mount or stackable. Compact enclosure, only 1U (13/4”, 44mm) high. Video in: 16 (terminal blocks). Video out: 32 (BNC connectors). Power input: 12~24 VDC/VAC. Current draw: 500mA. Built-in video and data surge protection. Perfect for use with DVRs. Transmits up to: 3,000ft (914m) w/ Passive Balun,

1.5mi (2.4km) w/ Active TX.

Connects up to four CCTV cameras to a central location using low-cost Cat5e/6 UTP cable.

Works with full-motion CCTV cameras up to 2,000ft (610m) away via passive video baluns.

RJ-45 or screwless terminal block output.

VA-1102B-WQ 1 Input, 2 Outputs

VA-1104B-WQ 1 Input, 4 Outputs Distributes single video input to multiple video outputs. Compatible with color or black/white signals. Transmits up to 984ft (300m). NTSC or PAL compatible. Connect to video camera,

multiplexer, VCR, DVR, etc. Voltage: 12VDC or 24VAC. Power adapter included. Power loop-out

(VA-1102B-WQ only). Gold-plated BNC connectors.

VA-2101B-WQ 1 Input, 1 Output

VA-2404B-WQ 4 Inputs, 4 Outputs Video amplifier compensates for video loss. Brightness and sharpness adjustments for each channel. NTSC or PAL compatible. Transmits up to 3,280ft (1,000m). LED to indicate power. 12VDC Power adapter included. Power loop-through to power nearby devices.

RD-304-D1Q

RD-316-R1Q

Output: Sixteen (16) RS-485 connectors. Range: Up to 3,937ft (1,200m). Connect up to 256 cameras or devices via RS-485. 12VDC Power adapter (included). Built-in surge protection and signal isolation. Dual-colored LED:

Red --- RS-485 activity, Blue --- Power ON. Rack or wall mountable. Compact enclosure, only 1U (13/4”, 44mm) high.

RD-316-R1Q

www.seco-larm.com

Passive Video Baluns

4-Port Passive Video Hub

RS-232 to RS-485 Converter

Snap-In Passive Video Baluns

Active Video Baluns

Data Distributors

Rack-Mount Passive Balun Hub

Rack-Mount Active Balun Hub

Ground Loop Isolator

Video Distributors

Video Amplifiers

8

VD-10BNA Dummy Box Camera with flashing LED

VD-10BN Dummy Security Camera with flashing LED

VD-30BS Dummy IR Bullet Camera with flashing LED

VD-10PL Dummy IR Bullet Camera with Real Working IR LEDs

VD-20BNA Dummy Dome Camera with flashing LED

VD-20BN Dummy Ball-Mount Dome with flashing LED

VD-40BN Dummy PTZ Speed Dome with flashing LED

KD-100Q Dummy Keypad

Keypad LEDs flash. Keypad “beeps” when

keys are pressed. Weather-resistant for outdoor use. Uses two or four (AAA) batteries.

CA-1610-3FLQ* DC Male plug, 3ft (0.9m) wire. LED indicates power and polarity.

CA-161T-02SQ DC Plug-to-terminal block, 21/2” (64mm) wire.

EVA-CB0R1Q BNC-to-RCA connector. Gold-plated connectors.

*U.S.A. and international patents pending.

CA-161T-02SLQ* DC Plug-to-terminal block, 21/2” (64mm) wire. LED to indicate power and polarity.

EVA-WB0B1-08Q 6” (15cm) Male-to-female

BNC connector. Gold-plated BNC connector.

CA-171T-02Q RJ-45 Male-to-terminal

block with 2” (5cm) cable.

CA-1616Q DC Plug-to-plug

adapter.

CA-1515Q DC Jack-to-jack

adapter.

CA-1526-1FQ DC Jack-to-double

DC plug, 1ft wires.

Black/Red Wires

CA-151T-02SQ DC Jack-to-terminal block, 21/2” (64mm) wire.

CA-151T-02SLQ* DC Jack-to-terminal block, 21/2” (64mm) wire. LED to indicate power and polarity.

CA-161T DC Plug-to-terminal block.

EVA-F5521-3Q DC Plug, pigtail connector, 3ft.

EVA-M5521-3Q DC Jack, pigtail connector, 3ft.

*Patent pending

Anodized aluminum housing (US 28). 12 or 24VDC (selectable). No residual magnetism. MOV surge protection. Adjustable mounting bracket. Complete mounting hardware for typical installations. “L” bracket and “Z” brackets available for easy

mounting (see pg. 9). Detachable faceplate. Built-in dual-colored status LED and bond sensor to

show locking status (E-941SA-600PQ only).

E-941SA-600 600-lb Holding Force, UL Listed

E-941SA-600PQ 600-lb Holding Force, UL Listed

Anodized aluminum housing (US 28). 12 or 24 VDC (selectable). No residual magnetism. MOV surge protection. Adjustable mounting bracket. Complete mounting hardware for typical installations. “L” bracket and “Z” brackets available for easy

mounting (see pg. 9). Detachable faceplate. Built-in dual-colored status LED and bond sensor to

show locking status (E-941SA-1K2PQ and E-941SA-1K2PD only).

UL Listed (E-941SA-1200 and E-941SA-1K2PQ only).

E-941SA-1200 1,200-lb Holding Force, UL Listed

E-941SA-1K2PQ 1,200-lb Holding Force, Bond Sensor, LED, UL Listed

E-941SA-1K2PD 1,200-lb Holding Force, Bond Sensor, LED, Timer 1~78 sec (not UL Listed).

10 SECO-LARM maglocks now UL listed.

X-714-046-18B Hook-and-loop cable tie. Organize loose cables.

CA-151R DC Jack-to-terminal block.

CA-1510-3FLQ* DC Female jack, 3ft (0.9m) wire. LED indicates power and polarity.

CA-1615-06LQ* DC Jack-to-plug, 6” (152mm) wire. LED indicates power and polarity.

CBA Series Dummy Cameras

Illuminated Power ConnectorsDC Pigtail Connectors

CCTV Accessories

Snap-In DC Connectors

Snap-In DC Connectors with LED

600-lb Single-Door Maglocks

1,200-lb Single-Door Maglocks


9

E-941S-600/ZQ (for 600-lb series locks)

E-941S-1K2/ZQ (for 1,200-lb series locks)

E-941S300R/ZQ (for E-941SA-300RQ)

“L” BracketsE-941S-600/LQ (for 600-lb series locks)

E-941S-1K2/LQ (for 1,200-lb series locks)

E-941S300R/LQ (for E-941SA-300RQ)

“U” (glass door) BracketsE-941S-600/UQ (for 600-lb series locks)

E-941S-1K2/UQ (for 1,200-lb series locks)

E-941S300R/UQ (for E-941SA-300RQ, includes “Z”, “L”, and “U” brackets)

“Z” Brackets

Plate SpacersE-941S-300/PQ (for E-941SA-300)

E-941S-600/PQ (3/16” for 600-lb series)

E-941S-1K2/PQ (1/4” for 1,200-lb series)

E-941D-600/PQ (for 600-lb double-door)

E-941D-1K2/P (for 1,200-lb double-door)

E-941S300R/PQ (for E-941SA-300RQ)

1,200-lb Holding force for each door. 12 or 24 VDC (selectable). Status-sensing relay output and dual-color status LED

(green: locked, red: unlocked). Anodized aluminum (US 28). No residual magnetism. MOV surge protection. Adjustable mounting bracket. Complete mounting hardware for typical installations. “L” bracket and “Z” brackets available for easy

mounting. Detachable faceplate.

E-941DA-1K2QDouble-door, 1,200-lb, UL

E-941DA-600Q

Similar to E-941DA-1K2Q and E-941DA-1K2P, but 600-lb holding force per door.

Double-Door, 600-lb, UL

E-942FC-1K3SQ1,300-lb Holding Force

E-942FC-600SQ600-lb Holding Force

Includes E-942FC-1300 gate lock with brackets for lock and armature.

For outdoor sliding or swinging electric gates. Weld or bolt brackets directly to gate. Corrosion-resistant, zinc-plated brackets. Black finish matches most gates. Lock is water-resistant

and vandal-resistant. Adapter and mounting

hardware included.

Same as E-942FC-1K3SQ, but 600-lb holding force and smaller profile.

(Magnetic lock portion only)

Armature Plate HolderE-941S-600/HQ (for 600-lb series)

E-941S-1K2/HQ (for 1,200-lb series)

Batteries not included

EAP-5D1Q --- 12 or 24 VDC

EAP-5D1MQ Same power-supply board

used in EAP-5D1Q.

E-941DA-1K2PDouble-door 1,200-lb, Bond Sensor, LED, UL

E-941DA-600PQDouble-Door, 600-lb, Bond Sensor, LED, UL

For small, low-security drawers or cabinets.

Holding force: 80-lb (36kg) @ 12VDC 110-lb (51kg) @ 24VDC.

12 or 24 VDC.

E-941SA-80Q

Magnet can be reversed in the housing for right-hand or left-hand swinging doors.

For indoor use, similar to the 600-lb and 1200-lb single-door maglocks.

Anodized aluminum (US 28).

Optional mounting brackets: E-941S300R/ZQ: “Z” and “L” bracket E-941S300R/LQ: “L” bracket E-941S300R/UQ: “U”, “Z”, “L” bracket

E-941SA-300RQ

Ideal for sliding or swinging gates.

Holding force: 1,300-lb (591kg).

E-942FC-1300

Water- and vandal-resistant. Dual-threaded conduit fitting. 61/2 ft Hookup cord. 12 or 24 VDC. "Z" and "L" brackets available.

E-942FC-600 For sliding or

swinging gates. Holding force:

600-lb (272kg). Water- and vandal-resistant. Dual-threaded conduit fitting. 61/2ft Hookup cord. 12 or 24 VDC. "Z" and "L" brackets available.

E-942F1300/ZQ (for E-942FC-1300)

E-942F-600/Z (for E-942FC-600)

“Z” BracketsE-942F-1300/L (for E-942FC-1300)

E-942F-600/L (for E-942FC-600)

“L” Brackets

For indoor and outdoor applications.

Weatherproof. 3ft (0.9m) Hookup wire included. Input voltage — 12VDC.

E-941SA-300

Outdoor

Supply Current: 5A@12VDC / 4.5A@24VDC AC Power failure supervision relay with delay timer:

5 seconds, 5 minutes, 5 hours. LED overload indicator and automatic shutdown for

short-circuit protection. Over-current fuse-protected AC input. Automatically switch to backup battery if AC fails. Individual AC input and DC output LED status

indicators.

PD-5PAQ 5-Output Power

Distribution Board (see pg. 16).

Indoor

Please visit www.seco-larm.com for photos.

www.seco-larm.com

Maglock Mounting Brackets

Double-Door Maglocks Gate Locks with Weldable Brackets

Access Control Power Supply

300-lb Electromagnetic Locks

80-lb Electromagnetic Lock

Electromagnetic Gate Locks

Gate Lock Mounting Brackets

10

SD-995C

UL 1034 Burglary. Field-selectable for fail-safe or fail-secure operation. Field-selectable dual-voltage: 12/24 VDC. Powered by a solenoid. Reversible, non-handed design fits either right-hand

or left-hand doors. Low profile: Strike is only 11/4” (32mm) deep. Includes three faceplates for nearly any type of door.

SD-994C

SK-990AQ Fail Secure

For use in wood doors. Baked painted finish.

Fail-secure operation

Fail-safe operation

For concealed mounting.

5/8” (17mm) Bolt extension. Fail-safe operation. 12VDC Input. Narrow design:

77/8"x15/16" (200x32 mm). Door-position monitoring output (NO/NC/COM).

Similar to SD-997BQ, but fail-secure (locks when power disconnected).

Incorporates manual lock/unlock cylinder to operate the SD-997A-DQ if power is lost.

SD-997BQ

SD-997SMB-AQ*

SD-997A-DQ

Surface-mount bracket set for SD-997BQ.

Manual lock/unlock cylinder

Lockknob

SD-993B-SS1,500-lb Shear Lock

SD-993S-UB“U” Bracket

Bracket for mounting on most glass doors.

SD-993S-SBSurface-mount Bracket

Holding force: 1,500-lb (680kg).

Small size for use with most metal door jambs. Works with sliding, single-action, and

double-action (swing-through) doors and gates. Fail-safe operation. 12 or 24 VDC.

For surface mounting of shear lock (when recessed mounting is not possible).

Surface-type door closer. Non-handed operation. Separate adjustment of

both closing and latch speeds.

Designed to conduct power to electric locks or access control devices mounted in doors.

18” (46cm) Stainless-steel cable. Mounting screws included.

SD-969-S18Die-cast aluminum end caps.

SD-969-A18Plastic end caps.

SD-969-S18

SD-969-A18

For exit doors -- Allows exit from inside while locked from outside.

Reversible non-handed design. For metal or wood doors. Stainless-steel 3/4" (19mm) throw-latch bolt. Deadlocking latch. Can be unlocked for extended periods of time. Fits doors from 30"~48" (0.7~1.2m) wide. Heavy-duty, steel construction.

Rugged, heavy-duty construction. For 36” (0.9m) doors. Actual length is 34.5” (0.88m). Includes two built-in dual-contact switches (5A@125VAC). Includes SECO-LARM SD-969-A18 Armored Door Cord.

SD-961A-36

Redesigned _ Easier to install.

SD-C141S

SD-962AR-36A

Similar to SD-995C, but for use in wood doors.

SD-994C24Same as SD-994C, but 24VDC.

ANSI-sized — 715/16"x17/16"x13/8". Reversible for right-hand

or left-hand doors. Jaw strength — 2,000-lb. Stainless-steel lip (keeper)

for strength and long life. Non-polarized connection.

SD-995C24Same as SD-995C, but 24VDC.

Current draw — 150mA@24VDC.

SD-996C-NUQ

For use in metal doors.Field-programmable in seconds for fail-secure or fail-safe operation.

Includes 3 faceplates

Fail Safe/Fail Secure

12/24 VDC

SD-997UB-AQ* “U” Bracket for SD-997BQ for glass doors.

*Use with SD-997BQ only.

Use with SD-962AR-36A. USD26D Finish. Non-handed.

SD-962HL-4A

(2 Keys included)

Power-off locking. Power unlocking. For entrance doors.SK-990BQ Fail Safe Power locking. Power-off unlocking.

Entry-Type Lever Trim

SD-962AR-36G

Grade 1, through-bolted design. Rigid, non-clutch mechanism. Non-handed design,

easily field-reversible.

SD-962H-6LB

ANSI A156.3, Grade 1 heavy-duty exit device. Conforms to and meets ADA regulations. UL Listed. For use in institutions, schools, and commercial

buildings where heavy-duty, reliable operation is required.

Current draw — 250mA@12VDC.

(2 Keys included)

Electric Shear Lock Universal Door Strike

Electric Deadbolts

Rim-Type Exit Devices

Push-to-Exit Bar

Door Closer

Armored Door Cords

Electric Door Strikes


11

Remotely and securely talk to visitors and unlock doors or gates.

Camera and monitor turn on and off via push button.

Camera and monitor turn off automatically if not in use.

DP-121Q

SD-927PKC-NEQ No Touch --- Just wave a

hand in front of the sensor. Sensing range up to 4" (10cm). Attractive "ring" illuminator turns

from red to green on sensor activation. Reduces risk of cross contamination. Reliable IR technology senses motion.

SD-927PKC-NSQ

DP-121-CQ Additional CameraDP-121-SQ Additional Monitor

PR-K1S1-A

10 Cards included. Sealed and weatherproof (IP67). Mounts easily to interior or

exterior walls. Up to 100 users. Output relay for timed (1~180 sec) or latch mode. Egress input for simple exiting of protected area. Tri-color wave-shaped LED status bar indicates

proximity reader’s mode and status. Blue : On/Valid Card indicator. Green: Programming Mode. Red: Invalid Card.

PR-112S-A

Additional cards sold in packs of 10.

EM-125.

Note: Max. two cameras and two monitors per system.

Same as SD-927PKC-NEQ, but in Spanish.

SD-927PWCQ Same as SD-927PKC-NEQ,

but with white plate and white body. Includes decals in English,

Spanish, and French.

One output: Form C relay output (5A@28VDC).

100 Unique 4~8 digit codes. Stainless-steel faceplate. Easily delete individual codes. Programmable wrong-code lockout. Programmable output relay

activation buzzer. Relay output inhibit control.

SK-1011-SQ

SK-1131-SQSimilar to SK-1011-SQ, but with: 120 user codes, three outputs, backlit keys, mantrap, alarm output, door- forced-open warning, duress output, door auto relock, and other advanced features.

Auto or manual-code entry checking. Egress input. Built-in tamper (N.C.) circuit. EEPROM memory: Prevents data loss. Power: 12~24 VAC/VDC. Backbox included. Limited lifetime warranty.

110 User codes. For solar applications keypad

illumination can be dimmed or turned off during standby.

Tamper switch, security screws, and heavy-duty construction.

Each output can be programmed for momentary (1~999 sec) or toggle.

SK-1123-SQ Surface Mount, 2 Outputs:5A@28VDC (relay), 1A@28VDC (relay)

Three outputs: - Main relay: Form C, 5A@28VDC. - Aux. relay: Form C, 1A@28VDC. - Transistor ground output (100mA@24VDC).

120 Unique 4~8 digit codes. Backlit keyboard is easy to use at night. Three LEDs can be wired as needed. Door-propped-open warning. Alarm output, mantrap, and door auto-relock features,

plus much more. Backbox included. Limited lifetime warranty.

(Keys are backlit)

Each code can be programmed for 4~8 digits. Egress input for exiting the protected premises. 12~24 VAC/VDC. Fits standard single-gang electrical box (SK-1123-FQ).

PR-K1K1-AQ Proximity keyfobs. Sold in packs of 10. EM-125.

SK-2323-SDQMullion-Style Keypad

1,010 Users. 12~15 VDC operation. Two Form C relay outputs. Each relay has programmable output

time from 1~99 seconds or toggle. Rugged, weatherproof (IP65) design. Backlit keys for easy nighttime use. Two egress inputs. Door sensor input. Built-in tamper sensor. All features are programmed from the keypad. Circuitry is potted with epoxy for outdoor use.

SK-2323-SPQMullion-Style Keypad with Built-in Proximity Reader

Similar to SK-2323-SDQ, but with proximity reader. Three programmable access modes --- proximity

card only, proximity card or user code access, or combined proximity card with user code access.

Compatible with all SECO-LARM proximity cards.

SK-1323-SPQSealed-Housing Stand-Alone Keypad with Built-In Proximity Reader

Similar to SK-1323-SDQ, but with proximity reader.

SK-1323-SDQSealed-Housing Stand-Alone Keypad

Features similar to SK-2323-SDQ.

SD-9163-KSVQ Same as SD-9263-KSVQ,

but slimline.

SD-9163-KSQ Same as SD-9263-KSQ,

but slimline.

SD-9263-KSQ Same as SD-9263-KSVQ, but

no mechanical override button.

SD-927PKC-NFQ Same as SD-927PKC-NEQ,

but in French.

SD-9263-KSVQ Single-gang No-Touch sensor. Adjustable sensing range and

delay time. Mechanical override button.

SD-9163-KS2Q Same as SD-9263-KS2Q,

but slimline.

SD-9163-KS1Q Same as SD-9263-KS1Q,

but slimline.

SD-9263-KS1Q Same as SD-9263-KSQ,

but in Spanish.

SD-9263-KS2Q Same as SD-9263-KSQ,

but in French.

PR-K1S1-A and PR-K1K1-AQ are compatible with all SECO-LARM proximity reader products (PR-112S-A, SK-2323-SPQ, and SK-1323-SPQ).

SK-1123-FQFlush Mount, 2 Outputs:5A@28VDC (relay), 100mA@24VDC (transistor)

SK-1123-SDQ Industrial, 2 Outputs:5A@28VDC (relay), 1A@28VDC (relay)

Similar to SK-1123-SQ, but with: Large, rigid steel enclosure. Extra-tamper-resistant faceplate.

Weatherproof

for outdoor useIP67

www.seco-larm.com

Indoor No-Touch Sensors

Video Door Phone

Stand-Alone Proximity Reader

Indoor Access Control Keypads Outdoor Access Control Keypads

Outdoor No-Touch Sensors

Proximity Cards and Keyfobs

12

SD-7103GC-PTQ Similar to SD-7103GC-PEQ,

but with timer. Built-in timer, 1~180 seconds. Buzzer output for audio status.

Similar to SD-7201GC-PEQ, but with “EXIT” and “SALIDA” messages on faceplate.

SD-7201GCPE1Q

2" Square illuminated green push button.

NO/NC contacts rated 10A@125VAC.

Includes switchable English and Spanish messages.

SD-7202GC-PEQ

Similar to SD-7201GCPE1Q, but with DPDT switch.

Two NO and two NC contacts, each rated 5A@125VAC.

SD-7201GFPE1Q

SD-7201RC-PE1 Similar to SD-7201GCPE1Q,

but with red mushroom-cap push button.

Green, 11/2” dia., illuminated, mushroom-cap push button.

NO/NC, DPST contact rated 5A@125VAC.

SD-7251GCEX1Q

SD-7202GC-PTQ Similar to SD-7202GC-PEQ,


SD-7275SGEX1Q Single-gang, vandal-resistant. 1” Diameter, illuminated

red/green push button.

SD-7175SGEX1Q Slimline, vandal-resistant. 1” Diameter, illuminated

red/green push button.

SD-7201GA-PT1 Similar to SD-7201GCPE1Q,


SD-7103GC-PEQ Stainless-steel slimline plate. Small, green, illuminated

push button.Includes switchable English

and Spanish messages.

SD-7204SGEX1Q Single-gang, vandal-resistant. 1” Diameter push button. NO/NC contacts.

SD-72051-V0Shunt switch, shunt ON/momentaryOFF, single-gang plate.

SD-71051-V0Same as SD-72051-V0, but slimline.

SD-72002-V0Shunt switch, maintained ON/OFF, single-gang plate.

SD-71002-V0Same as SD-72002-V0, but slimline.

SD-7101KBPE1Q Slimline, black N.C. push button.

SD-7201KBQ

SD-7101RAEX1Q Slimline, red N.O. push button.

Single-gang plate. Black push button. N.C. switch.

Similar to SD-7202GC-PEQ, but with white plate.

SD-7223GW-LQ

Similar to SD-7201GCPE1Q, but with white plate.

SD-7217GWQ

SD-8202GT-PEQ Green, illuminated 2" square push button.

SD-8103GT-PEQ Slimline, small square illuminated push button.

SD-8201GTPE1Q Green, 1½" diameter, mushroom-cap push button.

Ideal for hard-to-wire installations.

Built-in RF transmitter.

SS-199 Stainless-steel slimline plate

with 3/4” D-hole.

SS-299 Stainless-steel plate

with 3/4” D-hole.

Stainless-steel faceplate. Green mushroom-cap push button. NO/NC contacts rated 5A@125VAC.

SD-7201GC-PEQ

Same as SD-7213-GSP, but slimline.

SD-7113-GSP

Same as SD-7213-GSP, but with stainless-steel push button and guard ring.

SD-7273-SSP

SD-7173-SSP Same as SD-7213-GSP,

but with stainless-steel push button and guard ring.

Same as SD-7213-GSP, but with red push button.

SD-7213-RSP

Green mushroom-cap push button.

NO/NC contacts rated 5A@125VAC.

Built-in pneumatic timer, 1~60 seconds.

No power required.

SD-7213-GSP

SD-6173-SSQ Same as SD-6273-SSQ, but slimline.

SD-6273-SSQ Single-gang, vandal-resistant. Field-programmable color,

red or green. Weather resistant.

SD-7104SGEX1Q Slimline, vandal-resistant. 1” Diameter push button. NO/NC contacts.

Mushroom R-T-E Plates Illuminated R-T-E Plates

Vandal Resistant, Illuminated

R-T-E Plates with Timer

Remote Plates

R-T-E Key Switch Plates

Push Button R-T-E Plates

R-T-E Plates with Pneumatic Timer

RF Wireless R-T-E Plates

Vandal-Resistant RTE Plates

Piezo Electric Push Buttons


13

6-Beam E-9644-6B25 - Black Enclosure

E-9644-6W25 - White Enclosure



8-Beam E-9660-8B25

Black, 60” (152cm) long. Range: 25ft (7.5m) outdoor, 50ft

(15m) indoor. Similar to the E-9611-2B25, but

eight beams and 60” long. Black enclosure only.

10-Beam E-9680-10B25

Black, 80” (203cm) long. Range: 25ft (7.5m) outdoor, 50ft

(15m) indoor. Similar to the E-9611-2B25, but 10

beams and 80” long. Black enclosure only.

E-932-D33TBQPhotoelectric Through-Beam SensorRange: 33ft (10m)

For indoor or outdoor use. NO or NC alarm output. N.C. tamper circuit included. Interruption time adjustable. Built-in laser beam alignment system makes

for quick, easy installations.

Flush-mount design. Fits single-gang box. For entrances, hallways, offices, etc.

Outdoor range: 90ft (30m)



E-960-D90Q

E-960-D290Q

E-960-D190Q

90ft (30m) Sensing distance.

IP66 for indoor and outdoor use.

Mounts flat or at 90o to the wall with no need for extra brackets.

Adjustable lens angle.

E-961-S90WQ Multi-frequency (four channels selectable). Reduces interference between multiple

units installed in close proximity. Weatherproof, sunlight-filtering case for indoor

& outdoor conditions. Anti-frost system with built-in heater. NO/NC alarm output. N.C. tamper circuit. Quick, easy installation with built-in laser beam

& audible alignment system. Built-in alignment-strength indicator.




E-964-Q165Q

E-964-Q330Q

E-964-Q660Q

With laser beam alignment

The E-964-D390Q has all the same features as the E-960-D90Q, D190Q, and D290Q, including laser beam alignment.

Incorporates a 4-frequency function (programmable) to eliminate the possibility of interference when multiple photobeams are located within close proximity.


E-964-D390Q

4 Frequencies to eliminate interference.


E-964-Q495Q

441/2” (113cm) Long. Range: 25ft (7.5m) outdoor, 50ft

(15m) indoor. Similar to the E-9611-2B25, but six

beams and 441/2” long.



Uses 12~240 VDC/24~240 VAC. Pre-wired 6ft (1.8m) cord. Weatherproof (IP66) construction

for indoor/outdoor usage. Brackets (2) and mounting

hardware included.

E-931-S35RRQ

E-931ACC-RCQ3” Round Reflector.

111/4” (29cm) Long. Range: 25ft (7.5m) outdoor, 50ft (15m) indoor. For windows, doorways, skylights, etc. Rugged aluminum construction. LED alignment indicator. No synchronizing wires required. Slimline design: 115/16”x7/8” (34x23 mm). Trigger by breaking two adjacent or any

one single beam (programmable).

221/2” (57cm) Long. Range: 25ft outdoor, 50ft indoor. Similar to the E-9611-2B25, but four

beams and 221/2” long.

E-931ACC-HRQHood for the E-931ACC-RCQ or E-931ACC-R (2” square reflector.)

E-932-S16RRQPhotoelectric Reflective-Beam SensorRange: 16ft (5m)

E-931-S33PRQRange: 33ft (10m)

For assembly-line automation, outdoor gates, garage doors, or overhead doors.

Excellent immunity to shiny objects that could cause false triggering.

Operates on 12~250 VAC/VDC.

The E-931-S33PRQ Polarized Reflective-Beam Sensor provides reliable detection of shiny objects that could be missed by a non-polarized sensor.

Range: 35ft (10m)



www.seco-larm.com

Reflective-Beam Sensor

Flush-Mount Beam Sensors

Twin Photobeam Detectors Curtain/Barrier Sensors

Multi-Frequency Photobeam

Quad Photobeam Detectors

Single Photobeam Detector

Polarized Reflective-Beam Sensor

14

ST-1206-1.5AQST-2406-2AQST-2406-3AQST-2406-5AQST-2406-7AQST-2406-10AQ

ST-2406-7AQST-2406-5AQ

Regulated and filtered output voltage.

Short-circuit protection. Built-in backup battery charger. Switches to backup battery

automatically in case of power loss.

Convert low-voltage AC input power to low-voltage DC output power.

Model #

ST-1206-1.5AQST-2406-2AQST-2406-3AQ

Voltage (DC)

Current Current (peak)

Dual-input voltage: 120/240 VAC, 50/60Hz. Works with the SECO-LARM series of

power supply/chargers. Shielded windings to

reduce electromagnetic interference.

ST-UV16-W100Q 16VAC/100W

ST-UVDA-W100Q 24/28 VAC/100W*ST-UVDA-W180Q 24/28 VAC/180W*


ST-2406-10AQ6/12/246/12/24

6/126/12/246/12/24

6/12/247A4A

1.5A1.5A2.5A

9A7.5A5A

2A2A3A

10A

ST-UV28-T350Q 28VAC/350W

Efficiency Level

ST-UV12-S0.5Q 0.5 Amp

ST-UV12-S1.0Q 1 Amp

ST-UV12-S2.0Q 2 Amp

ST-UV12-S3.0Q 3 Amp

ST-UV12-S4.0Q 4 Amp

ST-UV12-S5.0Q 5 Amp LED power indicator. Universal 100~240 VAC input. Regulated 12VDC output. 6ft (1.8m) Cord, 2.1mm plug (+ center). Includes AC power cord (IEC320-C13). Low current draw.

Use in CCTV, access control alarms, etc.

6ft (1.8m) Line cord, 2.1mm positive center coax plug.

Sideways plug for ease of use on power strips. Universal 100~240 VAC input. Regulated 12VDC output. Low current draw. 6ft (1.8m) Cord, 2.1mm plug (positive center).

ST-HB105-TTQ

ST-LA105-TTQ 0.5 Amp

ST-LA110-TTQ 1 Amp

Converts 8~30 VAC/VDC to a regulated selectable and adjustable 5/12/24 VDC output: 8~30 VDC/VAC input for 5 VDC output 15~30 VDC/VAC input for 12 VDC output 24~30 VDC/VAC input for 24 VDC output

Small size for easy installation.

ST-1212-R0.5A500mA, Regulated

ST-2406-2AQ

ST-UV12-S1.0Q Shown

Fits easily on power strip

LED power indicator

Triggered by positive voltage (+DC), closure of dry contact, or opening of dry contact.

Adjust from 1sec to 60min. Form C relay.

SA-026Q

SA-025Q

Miniature: 13/16"x29/32"x5/8". Adjustable from 1~180 sec. Buzzer output. Form C relay.

5 Amp relay, DPDT, Form C.

6/12/24 VDC operation. LED indicates power.

SR-2224-C5Q

SA-027Q

365-Day annual timer. 12~24 VAC/VDC Operation. Two NO or NC Form C relays: 10A@120VAC / 28VDC. Each relay can be programmed for 50 events, total of

100 individual programmable events. 100 Programmable events can be set weekly, daily or

hourly 365 days a year. One egress input per relay (two total). Output can be shunt or momentary, and can be

programmed for 1~99 seconds.


ST-2406-10AQ

* Dual-voltage output: 24 or 28 VAC SA-025EQ 12~24 VDC Operation. Lock control relay (SPDT):10A@24VDC. Remote alarm relay: 10A@24VDC. Local alarm, transistor ground output. Three relocking modes via jumper:

—Standard (preset) —BOCA —Timed

SH-532L 128dB Multi-tone siren. Miniature size: 4” long, 3½” diameter. 6~12 VDC, 1.4A current draw.

SA-006DQ Siren driver with dual-power inputs. Two tones, steady and burst. 6~12VDC operating voltage.

ST-UV12-S3.0QShown

Compensates for DC voltage drops over long cable runs: 7~12VDC input for 12VDC output 12~24VDC input for 24VDC output

Output current: 500mA@12/24 VDC.

SA-025E1Q 12/24 VDC Operation. Lock control relay (SPDT):

10A@24VDC. Buzzer output: 85dB.

SA-025EQ Shown

Efficiency Level

Open-Frame Transformers

12VDC Linear Power Supply

Power Supply Chargers

Tabletop Switching Power Supplies

12VDC Plug-in Switching AC Adapters

Voltage Booster

Voltage Converters

Relay Board

Programmable Timers

Programmable Annual Timer

Delayed Egress Timers

Siren Driver

Siren


15

SM-207Q N.C. 3/8” press-fit mount

with leads. 1” Gap.

SM-207-5LQ N.C. mini 3/8” press-fit mount

with leads. 1” Gap.

SM-204Q N.C. mini self-stick surface mount

with flange and center leads. 1” Gap.SM-204M -- Magnet for SM-204Q/205Q.

SM-205Q N.C. self-stick surface mount with

flange and side leads. 1” Gap.SM-204M -- Magnet for SM-204Q and SM-205Q.

SM-206Q N.C. 1/4” recessed

mount with leads. 1” Gap.

SM-207-5Q N.C. mini 3/8” press-fit mount

with leads. 3/8” Gap.

SM-209 N.C. mini self-stick surface

mount for screens, with leads. 3/4” Gap.

SM-266 N.C. super-thin screen mount

with leads. 11/4” Gap.

SM-200Q N.C. surface mount with

screw terminals. 3/4” Gap. Includes cover.SM-823 -- Additional terminal cover.

SM-300Q N.O. surface mount with screw

terminals. 3/4” Gap. Includes cover.

SM-852LQ Aluminum “L” bracket for SM-226LQ.

SM-831 Alnico 5 magnet, 11/4”x1/4” dia.

SM-841 Alnico 5 magnet, 15/8”x3/8” dia.

SM-851 Aluminum “Z” bracket for SM-216Q.

SM-226LQ N.C. overhead door with “L” bracket.

24” Stainless-steel cable. 23/4” Gap.

SM-226L-3Q NO/NC overhead door with

“L” bracket. 23/4” Gap.

SM-226RQ N.C. overhead door with round

bracket. 24” Cable. 23/4” Gap.

SM-216Q N.C. wide-gap surface mount with

screw terminals. 23/4” Gap.SM-216M -- Magnet for SM-216Q.

SM-217Q N.C. wide-gap mini surface

mount with concealed screw terminals. 2” Gap.

SM-431-TQuick Connect Surface Mount For N.C. circuits. External screw terminals. 1" Gap. Available in brown or white.

SM-433-T Concealed Screws Surface Mount For N.C. circuits. Concealed screw terminals. 11/4" Gap. Available in brown or white.

SM-407-5TQuick Connect Recessed Mount For N.C. circuits. External screw terminals. 3/4" Gap. Available in white.

ST-BD01Q

Prevents deep discharge of backup batteries. Selectable input 12/24 VDC. Adjustable voltage cutoff and restore point. Green LED AC indicator & 2-color DC LED indicator.

Two NO/NC triggers. Two independent channels. Stores up to four numbers. Delivers message of up to 16sec to each number. Repeats message for one minute to ensure full delivery. Optional 9VDC internal battery. Use worldwide with Universal Dial Tone.

E-920B

ST-BT03Q12 or 24 VDC Tester, includes buzzer for audible continuity, and LED headlight.

Test for: 1. Voltage 2. Battery load 3. Voltage drop 4. PTC fuse 5. Polarity 6. Continuity

With 2 NO/NC triggers

ST-BL01Q Real-time, latch, and

auto-reset modes for testing N.O. and N.C. circuits. Features LED and

buzzer indicator for remotely testing a connection. Convenient headlight LED for

easy installations.

SM-207-31Q N.C. mini 1/4” press-fit mount.

1” Gap.

SM-207-41Q N.C. mini 3/8” press-fit mount.

13/4” Gap.

ST-BT02Q 6-in-1 12VDC Battery tester with continuity LED.

ST-BT02Q Shown

Indicates the condition of rechargeable gel-type 12VDC batteries.

Equipped with a momentary simulated load. Portable and easy to use.

www.seco-larm.com

Overhead Door ContactsQuick-Connect Magnetic Contacts

Recessed Contacts

Self-Stick Contacts Magnetic Contact Accessories

Screen Contacts

Wide Gap Contacts

Surface-Mount Contacts

Low Battery Cutoff

Voice Dialer

Multi-Purpose Battery Testers

High-Speed Latching Tester

16

SS-038-2CSBO Shadow/eyeball switch.

SS-090KN Extra keys. Specify number

when ordering (1300~1310).

SS-090 Two terminals, shunt SPST. Maintained ON-OFF, key removable

from both ON and OFF positions. Specify key number when ordering.

SS-095 Two terminals, momentary SPST. Maintained OFF, springs back from

ON, key removable from OFF only. Specify key number when ordering.

SS-090-1H0 Similar to SS-090, but key removable

in OFF position only (key #1300).

SS-092-2A0 Two internal SPST switches,

one always ON, one always OFF (key #1300).

SS-078Q N.O. latching panic button.

SS-076Q Toggle switch. Available in gray or white.

SS-074Q N.O. double-button

momentary hold-up switch.

SS-075Q N.O. “EMERGENCY” button.

SS-072Q N.O. tamper switch.

SS-040Q N.C. vibration/shock sensor.

Adjustable sensitivity.

SS-075C-PEQ Emergency & Push-To-Exit

NO or NC (selectable) momentary contact.

Three labels included.

ENFORCER 190 Audio discriminator. Patented design detects

high-frequency sound of glass breaking while filtering out ambient environmental noise.

When ceiling mounted, protects to a 25ft radius. Protects 45ft to the front and 25ft to either side.

Easy 2-wire connection for 6~12 VDC or 6~24 VDC.

SL-126QFor 6~12 VDC use.

SL-126-A24Q For 6~24 VDC use.

Perfect for "informative" household burglar alarm use. Incorrect polarity cannot damage circuit or draw current. Low current consumption with long-operating lifespan

of over 300 continuous hours (2,000,000 flashes). Choice of amber, blue, clear, green, or red lens. Lens is made of high-impact resistant acrylic, case

of high-impact resistant ABS plastic. SL-126LQ -- Extra lens for SL-126Q and SL-126-A24Q.

Choose amber, blue, clear, green, or red.

For entrance monitoring or entrance indicator.

“Ding-dong” or siren sound on beam interruption.

E-931CS22RRCQ Range: 22ft (6.7m)

Plug-in components. No hard wiring needed.

Includes reflector, brackets, 9VDC adapter, mounting hardware, chime.

Optional counter also available.

E-931ACC-CQ Counter for the E-931CS22RRCQ.

E-931ACC-SQ Additional speaker/chime for the

E-931CS22RRCQ.

Available in five colors: amber, blue, clear, green, or red.

LED Strobes feature a longer life with less heat generated.

Adjustable flashing speed. Programmable for flashing

strobe or rotating beacon mode (six different flash patterns).

SS-077Q N.C. latching panic button.

SS-073Q N.C. tamper switch.

SL-1301-BAQ 5 Strips (20 LEDs)

Available in four colors: white, red, blue or yellow (/WAQ, /RAQ, /BAQ, /YAQ).

12-LED strips for informative or decorative installations.

12VDC Operation. Each strip can be cut to

varying lengths depending on the application.

Strips can be connected end-to-end for maximum versatility.

Optional accessories: ● SL-SAS-PC1Q Power Connector ● SL-SAS-EC1Q End Cap ● SL-SAS-SH1Q LED Strip Fastener

SL-S212

4 High-intensity 1W LEDsSL-1311-MA

Available in four colors: amber, clear, blue or red.

10~30 VDC Operation. 19 Programmable flash

patterns. Synchronize up to 15 units.

SL-1302-MA

PD-4PSQ 4-Output, 1.1A each, PTC Fuses, 5 Amp.

Main input power fuse.

Includes circuit board only.

SH-504Q Miniature 85dB electronic buzzer. 5~15 VDC, surface mount or mount

in 3/4" (19mm) hole of alarm panel or remote plate.

Low current draw of 35mA@12VDC.

PD-4BSQ 4-Output, 1A each, Blade-style Fuses, 5 Amp.

PD-9PSQ 9-Output, 1.1A each, PTC Fuses, 5 Amp.

PD-9BSQ 9-Output, 1A each, Blade-style Fuses, 5 Amp.

PD-9PHQ 9-Output, 3A each, PTC Fuses, 10 Amp.

PD-9BHQ 9-Output, 3A each, Blade-style Fuses, 10 Amp.

SL-1301-BBQ 10 Strips (40 LEDs)

PD-5PAQ 5-Output, 1.1A each, PTC Fuses, 5 Amp.

52 High-intensity LEDs

IP66

(SL-126Q)

Detectors and Switches

Key Locks

Glass-Break Detector, Audio

Strobe Lights Entry Alert System

LED Strobe Lights

12-Inch LED Strips

High-Intensity LEDs

Power Distribution Boards

Buzzer


17

MVE-PB010Q Composite Video Balun

MVE-PB020QSnap-in Composite Video Balun

RCA-to-terminal block. Transmits composite video

YPbPr or RGB video signals. With screwless terminal block

connection and passive operation.

Transmits composite video YPbPr or RGB video signals.

Easily snaps in or out of wall plates or patch panels.

RJ-45 Jack. Passive operation. Max. distance:

Color - 2,230ft (680m), B/W - 2,550ft (780m).

MAE-P115-01QAnalog Audio Balun

MAE-P215-01QDigital Audio Balun

MAE-P127-01QSnap-in Analog Audio Balun

MAE-P227-01QSnap-in Digital Audio Balun

MAE-P317-01QStereo Balun

MAE-P337-01QStereo Mini (3.5mm) Plug Balun

RCA-to-terminal block. Transmits audio up to 1,000ft

(300m) over Cat5e/6 UTP cable. Gold-plated connectors.

RCA-to-terminal block. Transmits digital audio 600ft (180m)

over Cat5e/6 UTP cable. Supports Dolby Digital, DTS. Gold-plated connectors.


RCA-to-RJ-45 Jack. Analog audio.

Eases installation of dual mono or single stereo audio over Cat5e/6 cable.

Dual RCA jacks (red/right, white/left) on 6” (15cm) pigtail-to-RJ-45 jack.

Transmits audio up to 2,500ft (760m) over Cat5e/6 UTP cable.

Gold-plated connectors.

Send audio over Cat5e/6 cable from mini-stereo plug.

Stereo mini plug on 6” (15cm) pigtail-to-RJ-45 jack.

Transmits audio up to 2,500ft (760m) over Cat5e/6 UTP cable.

Gold-plated connector.

MVE-PCW15Q

MVE-PC015Q

Transmits YPbPr or RGB video signals. Four RCA connectors to RJ-45 jack. Supports HDTV (480i /480p/720i/720p/1080i/1080p). Maximum distance:

160ft (50m)@1080p, 900ft (300m)@480i.

Passive operation, requires no power.

Stackable or wall mountable.

Programmable digital audio or IR pass-through.


RCA-to-RJ-45 Jack. Digital audio.

Transmits VGA signals over Cat5e/6 cable.

Use with personal computer, DVR, etc. with VGA output to CRT or LED monitors or VGA projectors.

Up to 450ft (137m) range. Passive device. No power required. Sold in pairs.

EVT-SBP-GQ

MVD-V1501-1Q

Transmits VGA signals from a single source to multiple CRT or LCD monitors or VGA projectors.

Extends VGA range to 984ft (300m) over one Cat5e/6 cable.

Supports up to 1920x1200 resolution.

Each set includes one transmitter and one receiver.

Additional receiver (MVD-V1101-1RQ) available.

MVD-V1201-1Q

Transmits VGA signals from a single source to two CRT or LCD monitors or VGA projectors.

Extends VGA range to 984ft (300m) over one Cat5e/6 cable.

Supports up to 1920x1200 resolution. Each set includes one transmitter and one receiver. Additional receiver (MVD-V1101-1RQ) available.

MVD-V1101-1RQ Additional Receiver for the

MVD-V1501-1Q and MVD-V1201-1Q.

VGA Extender 1-In-5-Out

VGA Extender 1-In-2-Out

Similar to MVE-PC015Q, but wall-plate version.

MVA-EH01Q Component Video + Digital Audio to HDMI Converter

Input: Four RCA connectors (three for component video, and one for digital audio). Output: HDMI jack. Supports HDTV resolution up to 1080p. 5VDC Power adapter (included).

MVA-VH01Q VGA input (plus stereo audio) to HDMI signal. Allows display from computer on HDMI monitor.

Input: VGA connector and dual RCA jacks (red/right, white/left). Output: HDMI jack. HDCP Pass-through. 5VDC Power adapter (included).

The Full-Line 120-page 2011 SECO-LARM Catalog is now available. Contact us for a copy.

A/VMulti-Media

A /VMulti-Media

A /VMulti-Media

A /VMulti-Media

A /VMulti-Media

A /VMulti-Media

A /VMulti-Media

www.seco-larm.com

Composite Video Baluns

Audio BalunsComponent Video Baluns Passive VGA Balun

Active VGA Baluns

Component Video & Digital Audio to HDMI VGA & Stereo to HDMI Converter

2011 SECO-LARM Catalog

18

MVS-H4101-0Q

Black chrome cable

MC-1101-09FQ

Easily switch between any of four HDMI sources by remote control or push button.

Easily connects to different digital video sources (DVD, A/V receiver, satellite, game console, etc.).

HDTV: Resolution up to 1080p. 24K Gold-plated connectors. IR Remote control included.

9ft (3m) Length. HDMI Type-A to Type-A. Gold-plated connector. 28AWG OFD: 7.5. 90° Angle cable versions

also available.

MVE-AH010Q

MC-2201Q

MC-2101Q

For joining two HDMI cables together. Gold-plated contacts. Compatible with all 19-pin

HDMI cables, supports HDCP.

The ENFORCER MC-2201Q is used to join two HDMI cables together. It has gold-plated contacts for reliability and longer life.

MC-5501-09FQ 9ft (3m) Single-mode

optical patch cable. 2 x Toslink connectors.

MVR-HH01Q Extends high-definition video

and digital audio up to 115ft (35m). Supports high-definition video

up to 1080p.

Similar to MC-2201Q, but rotates 180°. Use for running HDMI cables

in tight locations.

Transmits an IP signal or any other TCP/IP signals over existing coax cable.

Distance up to 5,900ft (1,800m). 5VDC Adapter included.

IPB-A1200QActive IP Balun over Coax

Identical to IPB-A1200Q, but uses Cat5e/6 cable instead of coax.

Distance: Up to 3,900ft (1,200m). 5VDC Adapter included.

IPB-A1100Q Active IP Balun over Cat5e/6

Connect HDMI equipment using low-cost Cat5e/6 UTP cables. Works with full-motion video

and audio signal up to 195ft (60m). HDMI over Cat5e/6 without any signal loss. Supports 480i/480p/576i/576p/720p/1080i/1080p. Built-in equalization and signal-boost function. Auto-adjusts the equalization and amplification to

eliminate feedback. Compact size. 5VDC Power supply included. Supports DDC, EDID, and hot-plug detection.

IPR-P188QPoE Repeater

Extend power and data 300ft (100m). Use multiple units to extend power and data

range to 1,800ft (600m). Passive device, requires no external power. Compatible IEEE 802.3af PoE standard. Supports 10/100/1000 BASE-T. Built-in LED status indicator. Plug-and-play for easy installation.

MVE-AH020Q

Connect HDMI equipment using low-cost Cat5e/6 UTP cable. Works with full-motion video

and audio signal up to 164ft (50m). HDMI over Cat5e/6 without any signal loss. Supports 480i/480p/576i/576p/720p/1080i/1080p. Built-in equalization and signal-boost function. Auto-adjusts the equalization and amplification to

eliminate feedback. Compact size. 5VDC Power supplies included. Supports DDC, EDID and hot-plug detection.

MVE-AHW1Q

Active. IR Pass-through. Transmits HDMI signal

over dual Cat5e/6 cables. Range to 164ft (50m). Resolution to 1080p.

ENFORCER Active IP Baluns are designed to extend any TPC/IP devices beyond the 300ft (100m) limit of Ethernet. The units extend the range to 3/4mi (1.2km) for Cat5e/6 or 1.1mi (1.8km) for coax. Use existing coax or Cat5e/6 cable for the runs.IP over coax allows installation of an IP camera at the end of a coax run instead of having to pull new Cat5e/6 lines. The units do not filter out any protocols, codes, or applications, ensuring compatibility with any IP camera and its software.

A/VMulti-Media

A /VMulti-Media

A /VMulti-Media

A /VMulti-Media

A /VMulti-Media

A /VMulti-Media

A /VMulti-Media

HDMI/Optical Cable

HDMI over Cat5e/6

HDMI Switcher

HDMI Couplers

HDMI Repeater Active IP Baluns

Power Over Ethernet Repeater

HDMI over Single Cat5e/6

Wall-Plate HDMI over Cat5e/6


19

Two 2-button RF remotes: – Arm/disarm up to 200ft (60m). – Panic protection. Silent arm/disarm. – Defective zone & shock sensor bypass via remote.

Built-in dual-stage shock sensor (patented). 5-function LED shows armed, disarmed, valet,

learn mode, and RF reception. Emergency disarm/valet. Instant triggering. Current-sensing protection. Backup battery capability.

E-100LB Entry-Level AlarmEntry-level alarm system packed with the most wanted features including two slimline 4-button RF remote controls, relay for flashing parking lights, and outputs for door locks and starter disable.

E-300L Full-Featured 3-Channel Alarm

CBA® 33 Self-Contained Vehicle Alarm

SLI® 840 High-End Keyless Entry/AlarmThe perfect alarm for any vehicle security application. Use as a keyless entry system, or as a complete multi-featured alarm.

SLI® 762PP-ISS Passive Proximity ImmobilizerThe Passive Proximity Immobilizer eliminates the hassle of remembering how and when to operate a vehicle security system. Just put the included keyfob on the keychain, and the system arms and disarms automatically.

SLI® 762FP-ISS Touchkey ImmobilizerThe Touchkey Immobilizer combines high security with the convenience of completely passive arming. To arm, turn off the ignition. 30 Seconds later, up to two of the car’s electrical circuits are disabled. To disarm the system, insert the Touchkey momentarily into the Touchkey receptacle. Start the vehicle within 30 seconds or the Immobilizer will rearm.

SLI® 259A Dual-stage Microwave Sensor

SS-052B Dual-stage Electromagnetic Shock Sensor

SS-051ME Dual-stage Glass-break Sensor

SR-5220A /SR-5440A 2 & 4 Window Roll-up Modules

SR-5201R Power Door Lock Interface

Two 4-button RF remotes. Door lock outputs (+/–). Starter-disable output. Flashing parking lights (built-in relay). Dual-stage shock sensor (patented). 128dB Multi-tone siren. 5-Function LED. Multi-function push button. Multiple programming functions.

Two 3-button RF remotes. Dual-stage glass-break sensor with remote microphone. Dual-stage shock sensor. Starter-disable relay built-in.

Two 4-button “Icon” RF remotes. Door lock outputs (+/–). Starter-disable output. Flashing parking lights (built-in relay). Domelight supervision output. Dual-stage shock sensor (patented). 128dB Multi-tone siren and separate horn-honk output. 7-Function LED. Multi-function push button. 13 Programming functions.

Two on-board relays for disabling the starter, ignition, or fuel pump.

Installer test mode helps determine best position for the sensing coil.

Plug-in status LED included. No valet switch needed.

Two Touchkeys supplied with each unit. Handsomely crafted backlit

receptacle. Flashing status LED

indicates immobilizer armed, disarmed, code-learning mode, and valet override.

Ideal for vehicles with cloth or open tops, or open sunroofs.

Dual-stage protection --- Chirps siren if exterior zone violated (someone gets too close to car), triggers alarm if interior zone is violated (break-in or vandalism attempt).

Dual-stage protection --- Chirps siren if car lightly tapped, triggers alarm on break-in or vandalism attempts.

Includes remote microphone with 3ft cable for easy mounting and concealing inside the car.

Dual-stage protection --- Chirps siren on light tap of window, triggers alarm on break-in.

Compatible with most power-window systems. Works off momentary or constant ground trigger.

System override if ignition is turned on, doors unlocked, or any door opened.

Interfaces with all ENFORCER RF alarm systems. SR-5220A --- 2-Window module. SR-5440A --- 4-Window module.

Allows nearly any alarm to control nearly any type power-door lock/unlocks.

Includes two pre-wired, built-in, heavy-duty 30 Amp relays with protecting diodes and spike/noise suppressors.

X-187-037-1SC Relay

SPDT, 12V, 30A/40A heavy-duty automotive relay.

SS-066TL Pin Switch

European-style pin switch.

SS-061LSN Pin Switch

Patented heavy-duty long steel body with nylon fiberglass shaft and stainless steel contact terminal.

www.seco-larm.com

Immobilizers

Vehicle Security Systems Keyless Entry/Alarm Vehicle Accessories

SECO-LARM 2011 Condensed Catalog Ver.B4B

Documents

Transcript of SECO-LARM 2011 Condensed Catalog Ver.B4B