PRE-SORTEDFIRST CLASS MAIL

US POSTAGEPAID

HAVERTOWN, PAPERMIT #45

1440 COWPATH RD. • HATFIELD, PA 19440215/361-9099 • Fax: 215/361-9212

www.hunyady.com

`07 CEDARAPIDS HSI5064

`07 CEDARAPIDS 8’X20’ TRIPLE DECK WET SCREEN

`08 NPK HYDRAULIC BREAKER

SEALED BID AUCTION

(35) miles North of Pittsburgh, PA

Delmont Quality Limestone, LLC

BID CLOSING: MAY 15, 2013

5:00 PM EDT

UNUSED 400TPH CRUSHING AND

SCREENING PLANT

SEALED BID AUCTION

PA Auction License: AY000281 • While information is believed to be accurate, all items will be sold “As-Is, Where-Is” without guarantee or warranty. A physical inspection is suggested.

Notice: The following 400 TPH crushing and screening plant was purchased NEW in 2008 by Delmont Quality Limestone, LLC and remains UNUSED and UN-ERECTED due to unforeseen circumstances leading to the termination of the project. DQL will be offering this plant, with components and support equipment FOB. The plant will be offered both in piecemeal and in entirety. DQL reserves the right to accept or reject any/all bids received, however the owners remain very motivated to sell!Photo Library: Photo Library can be accessed at our website www.hunyady.com, navigate to Current Auction Calendar, there you will find links to all pertinent information and additional photographs.Financing: Financing is available, please contact Susan at Hunyady Auction Company for complete details. Those anticipating financing must apply for, well in advance of bid deadline. A bank issued letter of pre-approval must accompany the submitted bid form at deadline.Location and Directions: Inspection is by appointment only, all pertinent information, including location and directions, will be provided at time of confirmation of inspection appointmentInspection: Inspections can be scheduled beginning Monday, April 29, 2013 and will continue through bid closing until 12:00 noon. The site is closed Saturday and Sunday. All inspections will be by appointment only! Please contact Hunyady Auction at (800) 233-6898 or (215) 361-9099 to arrange an inspection appointment.Bidding Process: Bid packages can be obtained by contacting Hunyady Auction Company and will be sent directly to you via US mail, overnight mail, e-mail, or fax. Bid packages will contain terms and conditions of the sale, complete equipment description, and directions to the site. All bid sheets must be signed and delivered to our home office on or before Wednesday, May 15, 2013 by 5:00PM EDT.Bid Deadline: All bids must be received at our office no later than Wednesday, May 15, 2013, by 5:00PM EDT.Loading and Removal: All items will be sold FOB and loaded at no additional cost. Loading will be coordinated by appointment only. All items must be removed no later than Thursday May 30, 2013. Should additional time be needed, arrangements can be made to move items to another location within 2 miles and stored, however hauling fees will be encountered.Bank Letter of Guarantee: If prior credit has not been established with Hunyady Auction Company, we will require that all bids submitted to be accompanied by a “Bank Letter of Guarantee” qualifying available funds supporting, at minimum, the total amount of bids submitted. If financing purchases, we will require a “Letter of Pre-Approval” from financier.Sample “Letter of Guarantee”: “We hereby guarantee available funds for our customer ________________, up to the amount of $______________ at the time of this writing on the date of _________________. All letters of guarantee must be on bank letterhead and signed by a qualified bank officer.Noti� cation of Successful Bid: Successful bidders will be notified Friday, May 17, 2013 by 12:00PM EDT.Terms and Conditions: Successful bidders will be required, at a minimum to place a 10% deposit via wire transfer, no later than (48) hours from award notification, and balance to be due on or before Friday, May 24, 2013. No items will be removed until payment is made in full.Sales Tax: Since this contractor is selling items not normally sold in the course of his business, the Commonwealth of Pennsylvania considers this an isolated sale and does not require the auction company to collect sales tax.

Delmont Quality Limestone, LLC

CONVEYOR

RADIAL STACKERS

36”x100’ Fixed Radial Stacker, 36” deep truss, 50HP, 8’ receiving hopper, 3HP fixed radial travel (Not Assembled-No Belt)30”x100’ Radial Stacker, 36” deep truss, 25HP, 4’ receiving hopper, 2HP radial travel, oscillating wheels (Not Assembled-No Belt)30”x80’ Radial Stacker, 36” deep truss, 15HP, 5’ receiving hopper, oscillating wheels (Not Assembled-No Belt)30”x60’ Radial Stacker, 24” deep truss, 10HP, 5’ receiving hopper, oscillating wheels (Assembled With Belt-Running Gear Not Installed)24”x100’ Radial Stacker, 36” deep truss, 15HP, 4’ receiving hopper, 2HP radial travel, oscillating wheels (Not Assembled-No Belt)24”x80’ Radial Stacker, 36” deep truss, 10HP, 5’ receiving hopper, oscillating wheels (Not Assembled-No Belt)24”x60’ Radial Stacker, 24” deep truss, 10HP, 5’ receiving hopper, oscillating wheels (Assembled With Belt-Running Gear Not Installed)

ASSEMBLED CONVEYOR

24”x60’, 24” Deep Truss, 3-Ply Belt, 7.5HP • 24”x60’, 24” Deep Truss, 3-Ply Belt, 5HP • 24”x32’, 24” Deep Truss, 3-Ply Belt, 5HP

The following conveyor components (350+/- feet) will be offered individually. Bidders will have the ability to select conveyor intermediate sections and heads to suit needs.

36” Deep Truss For 36” Belt: (4) 40’ sections; (1) 20’ section; (1) 10’ tapered head section, 50HP with Dodge hear reducer; (1) 10’ tapered head section, 30HP with Dodge gear reducer; (1) 25’ 12” channel with 15HP

36” Deep Truss For 30” Belt: (2) 40’ sections; (2) 20’ sections

All conveyor and stackers are 2007 PRODUCERS SUPPLY manufactured. Some are assembled with belt, however the majority is not assembled and those do not have belt.

CONVEYOR

SEALED BID AUCTION

UNUSED 400TPH CRUSHING AND SCREENING PLANT

SECONDARY CRUSHING FINES RECOVERY SYSTEM

PRIMARY CRUSHING

2007 CEDARAPIDS Model HSI5064 Horizontal Shaft Impactor, s/n 54368, Toshiba 300HP, 1185RPM, 460V, 3-bar 50” diameter rotor, 5” thick blow bars with (4) wear sides, hydraulic adjusting upper and lower breaker plates (5HP/460V power pack), hydraulic opening crusher enclosure, (2) side breaker plate inspection doors, (2) rear breaker plate service access doors, 40” diameter v-belt crusher sheave.

100 Ton Surge Bin and Belt Feeder: 100 Ton Cylindrical Surge Bin, 11’6” dia x 20’ h, flat bottom of 1/2” floor plate, 5/16” mild steel main bin • 2007 PRODUCERS SUPPLY 42”x12’ Belt Feeder, s/n 4212BFDR682-15, 15HP/1765RPM/460V with Dodge gear reducer, 3-ply, 330 PIW belt

2007 CFS (Sizeteq, Inc.) Model VDS512-6, 5’x12’ Hi-Frequency De-Watering Screen, s/n T0534, dual Cleveland model RE-60-6BK vibrator mo-tors, modular poly screen deck (This Item Will Be Offered Individually As Well)

KREBS Model DS20LB, 20” Cyclone, s/n 100051U, with cyclone support, platform, and ladder.

30’ Diameter Steel Constructed High Capacity Clari� er (not as-sembled), with DBS model S34-BF-L, 3HP drive motor, 27,000 ft lbs torque, rake raise, bridge walkway, and Floc mix system.

Pump Package To Include: 10’ dia x 10’h Sump (5,800 gal) • 8’ dia x 8’h Sump (3,000 gal) •AURORA In-Line Fresh Water Pump, 100HP, 6x6, 2,000 GPM • FLEX 8”x8” Slurry Pump, 20HP • 2007 TSURUMI 4” Submersible Make Up/Water Recovery Pump

Plant Pipe Package To Include: (1,200+/- Ft.) SDR-11 Poly Pipe (6” OD/5-3/4” ID) • (100+/- Ft.) 8” SCH40 • (150+/- Ft.) 4” SCH40

2007 CEDARAPIDS Model HSI5064 Horizontal Shaft Impactor, s/n 54153, Toshiba 300HP, 1185RPM, 460V, 3-bar 50” diameter rotor, 5” thick blow bars with (4) wear sides, hydraulic adjusting upper and lower breaker plates (5HP/460V power pack), hydraulic opening crusher enclosure, (2) side breaker plate inspection doors, (2) rear breaker plate service access doors, 40” diameter v-belt crusher sheave.

Primary Crusher Charging Hopper (Not Assembled): 50 ton minimum capacity, 20’ wide loader hopper, bolt-on wings and rock back box.

Vibrating Grizzly Feeder: 2007 CEDARAPIDS Model VGF5220-15, s/n 54688, Toshiba 40HP/460V motor, 52”x20’ overall with 15’ long pan, 22” side sheets, (5) 60” adjustable tapered grizzly bars.

Hydraulic Breaker: 2008 NPK Model GH-6 Hydraulic Breaker, s/n 89691, 2,000 ft lb impact energy, 2008 NPK Model B-700-02 Hydraulic Boom, s/n 1N6735, with 11’ boom, 12’ stick, and pedestal controls, 2008 NPK Model HP50-02 Hydraulic Power Pack, s/n 1N6643, 50HP/460V motor.

Primary Crusher Discharge Conveyor: 2007 PRODUCERS SUPPLY 42”x41’ Chan-nel Frame Conveyor, s/n 4241CFC672-3, 25HP/460V, 10” channel frame, 18” diameter head pulley, 16” diameter tail pulley, impact idlers at load point, troughing idlers, sup-port structure with integrated load hopper. (No Belt) (Head Section Not Assembled)

`07 CEDARAPIDS HSI5064

`07 CFS VDS512-6 DE-WATERING SCREEN

KREBS DS20LB 20 INCH CYCLONE

PLANT PIPE PACKAGE100 TON SURGE BIN

`07 CEDARAPIDS HSI5064

`08 NPK HYDRAULIC BREAKER

PRIMARY DISCHARGE CONVEYOR

PITTSBURGH, PENNSYLVANIA

BID CLOSING: MAY 15, 2013 - 5:00 PM EDT

SCALPING AND WASH SCREENS CONTROL HOUSE AND MOTOR CONTROL CENTER2007 CEDARAPIDS Model TSS6203-32, 6’x20’ 3-Deck Vibrat-ing Scalping Screen, s/n 54727, Toshiba 40HP/1175RPM/460V, 24” bolt-on feed box, right hand v-belt drive. (No Screen Material-Motor Not Mounted)

2007 CEDARAPIDS Model TSH8203-38, 8’x20’ 3-Deck Vibrating Wet Screen, s/n 54728, Toshiba 50HP/1175RPM/460V, 24” bolt-on feed box water mani-fold and spray nozzels, right hand v-belt drive, Polydeck synthetic screen material in-cluded: 1-1/8” top deck, 7/16” middle deck; 4-mesh bottom deck. (Motor Not Mounted)

(2) Screen Towers for Above Screens, approximately 30’x12’ high, (1) with 2007 Producers Supply 42”x25’ collecting conveyor, s/n 4225CFC683-16, chute work.

Control House: 8’ wide x 12’ long x 8’ high, glass on (4) sides, 1” sound suppression package, lock-ing entrance door, and lifting eyes, all steel construction.

CUTLER HAMMER Intelligent Technologies Comput-erized MCC to include: 2500 amp main circuit breaker, 480 volt, 3-phase, 4-wire with (12) sections housing motor starters, (4) soft start motor starters, variable speed drives, circuit breakers, and surge suppressor.

CUTLER HAMMER Power Line Panel: 100 amp, main lug only, 3-phase, 30 circuit, 480/277 volt, includes 30 single pole, 20 amp circuit breakers.

RED LION 15” Human Interface Operator Touch Screen, mounted in slanted top opera-tor console.

CUTLER HAMMER Power Line Panel: 225 amp main circuit breaker, single phase, 42 circuit, 240/120 volt.

(2) 50KVA Single Phase Transformers, 480/240 volt primary, 240/120 volt secondary

(1) 15KVA Single Phase Transformer, 480/240 volt primary, 240/120 volt secondary(2) 48’ Shipping Containers, designed for off-set stacking with control house, to house MCC electrical system, mechanical storage, and dust suppression.

`07 CEDARAPIDS 6’X20’ TRIPLE DECK

`07 CEDARAPIDS 8’X20’ TRIPLE DECK WET SCREEN

(1) OF (2) SCREEN TOWERS

CONTROL HOUSE

CUTLER HAMMER

MCC

CUTLER HAMMER POWER LINE PANEL

RED LION TOUCH SCREEN

(1) OF (2) 48’ SHIPPING CONTAINERS

MCC electrical components are stored in a climate controlled warehouse approx. (30) miles from quarry location