Seal The World GREEN -...

Rev 09.15

Your Trusted Partner in Material Supply for Construction, Façade, RHVAC & Solar Industry.

Seal The World GREEN

Sealant Range

Thermal / Acoustic Insulation

Foam Materials

Adhesive Tapes

Glass / Metal Protection Film & Coating

Setting Block for Glass

Ta

ble

of

Co

nte

nts

2

Table of Contents

1 Company Profile ..................................................................................................................................................................4

2 Product Summary ................................................................................................................................................................6

3 Sealant Feature & Application Chart ..................................................................................................................................9

4 Two- Part Structural Glazing Silicone Sealants .................................................................................................................10

GE UltraGlaze® SSG4600 [Accelerated Cure / Enhanced Performance]

GE UltraGlaze® SSG4400

5 One- Part Structural Glazing Silicone Sealants .................................................................................................................11

GE UltraGlaze® SSG4000E / SSG4000 AC

GE Construction SCS1200® [FDA- Certified / High Temperature: Up to 204oC]

GE SilPruf® SCS2000 [Dual-Purpose]

6 Weatherproofing Silicone Sealants ............................................................................................................................. 12

GE SilPruf® NB SCS9000 [Non- Stain, Non- Bleed / Reduced Dirt Pick- Up]

GE SilPruf® SCS2000N

GE UltraPruf® II SCS2900

GE SilGlaze® N-10 [High Temperature: Up to 206oC]

GE AP 3600

7 Modified Silicone Sealants [Non-Bleed, Non-Stain] .................................................................................................... 14

SHARPIE Modified Silicone Sealant MSC1-01 [Cleanroom ≥ Class 100 (ISO 5)] SHARPIE Modified Silicone Sealant MSC1-14

SHARPIE Modified Silicone Sealant MSC1-03

SHARPIE MEGAHARD ONE MS Sealant MSC1-06 [MEGA Hard One]

8 Specialty Sealants ........................................................................................................................................................ 15

GE PENSIL® 300 Firestop Joint Silicone Sealant [Fire-rated up to 2-hr / Enhanced Chemical Resistance]

VAROSEAL Polyurethane (PU) Sealant [Cleanroom ≥ Class 1000 (ISO 6)]

GE TOSSEAL® 811 & 817 Expansion Joint Sealant

GE TOSSEAL® 78 Super Transparent Silicone Sealant

GE TOSSEAL® 83 Mildew Resistance Silicone Sealant

GE TOSSEAL® 83AB Mildew Resistance Silicone Sealant [Anti-Bacterial]

GE SEAL IT RIGHT 168S Silicone

GE TOSSEAL® 80-SC Cleanroom Sealant [Cleanroom ≥ Class 1 (ISO 3)] GE Multisil™ SCS5500 Silicone [For Plastics & Polycarbonates]

X’traseal X’mastic Non- Skinning Sealant [Non- Drying]

EGOSTIK EG-130 No More Nails

9 General Purpose Sealants ............................................................................................................................................ 18

GE SEAL IT RIGHT 168 Silicone

GE ALL PURPOSE 268 Silicone [Mildew Resistance, Tested by PSB, Singapore]

LIBERTY 405 Acrylic Gap Sealant [Paintable. BS476: Part 7]

EGOSTIK EG-120 No More Gap Acrylic Sealant [Paintable]

10 Construction Sealant Primers / Cleaning Agent .......................................................................................................... 19

GE SS4044P, SS4004P, Tosprime C [Primers]

Isopropyl Alcohol (IPA) / Xylene [Cleaning Agent]

11 Thermal / Acoustic Insulation ...................................................................................................................................... 20 KM Mineral Wool

KM Glass Wool

MAXFLEX™ EPDM Closed Cell Elastomeric Insulation [ST / HF / HT / AL Clad / FSK]

KM Fiberglass Gasket Tape [STANDARD / SERIES AGB]

Ta

ble

of

Co

nte

nts

3

Table of Contents

12 Foam / Adhesive Tape .......................................................................................................................................................24 MaxDuct Tape [Duct Gasket Foam Tape]

MaxTape [Insulation Foam Tape]

KM Aluminum Foil Tape

VitalBand Bitumen Tape

13 Protection Film / Tape for Glass & Metal .........................................................................................................................25 PE Protection Film for Glass

PE Protection Film for Metal

PVC Protection Tape for Metal

PVC Static Protection Tape

14 Protection Coating for Façade, Building & Interior Work ................................................................................................27

WindowGOOP™ Temporary Peel- Able Protective Coating for Glass

MultiGOOP Temporary Peel- Able Protective Coating for Glass and Metal

GE SilShield SEC2400 Silicone Architectural Coating

GE SilShield SEC2500 AWB Air and Water Barrier Silicone Coating

15 Backing Foam Range for Sealant / Setting Block / Waterproofing Membrane for Façade ....................................... 29

KM Breathable Tape [Open Cell]

KM HD- EVA Foam [Closed Cell]

KM PE Backer Foam [Closed Cell – Square / Round]

KM Rubber Setting Block Range for Glass

KM Silicone Seal / Sheet

16 Structural Adhesive Foam Tape ................................................................................................................................... 31

17 STI Firestop Product Range Overview ......................................................................................................................... 32 18 Veda France Building Joints Product Range Overview ................................................................................................ 33

19 Recent Iconic Projects Involvement ............................................................................................................................ 34

C

HA

PE

TE

R 2

: P

rod

uct

Su

mm

ary

4

COMPANY BACKGROUND

2960 is a young growing international trading company with the core

purpose to improve building work efficiency and standard through expert

solutions in specialty materials, components and systems.

OUR MISSION

“Our MISSION is to profitably enable our customers’ success by constantly challenging limits through Superior Quality & Excellent Service.”

OUR CORE VALUES

� Service: ¾ In- House Test Laboratory ¾ Site De- Glazing Test ¾ Momentive ADC Laboratory

@ Science Park ¾ On- Site Inspection

¾ Technical Advisory ¾ Optimum Storage Environment ¾ Drawing Review ¾ Operational Production

� Quality: ¾ Test Report from Recognized

Test Agency ¾ Certificate of Analysis from

Manufacturer ¾ Optimum Storage Environment ¾ On- Site Inspection

� Innovation: ¾ Business Development ¾ Problem Solving ¾ Application Development

� Integrity: ¾ Ownership of Collaboration ¾ Quality Assurance ¾ Service Orientated

� Teamwork: ¾ Business Partnership ¾ Project Ownership

CH

AP

TE

R 2

: P

rod

uct

Su

mm

ary

5

Two Nine Six O Trading Pte Ltd is the Authorized Distributor for:

1) Momentive – GE Silicone Sealant Range 2) SHARPIE Modified Silicone Sealant Range 3) VAROSEAL Polyurethane Sealant by HEPCE CHEM 4) EGOSTIK Acrylic and Adhesive Sealant Range 5) MaxFlex EPDM Elastomeric Closed Cell Thermal / Acoustic Insulation 6) WindowGOOP™ Temporary Protective Peel-able Coating 7) Specified Technologies Inc. [STI] Firestopping 8) VEDAFRANCE Expansion Joint Systems 9) VedaFeu Firestop Expansion Joint Systems

Manufacturer for:

1) KM Acrylic Foam Tape 2) KM Heavy Duty – Ethylene Vinyl Acetate (HD-EVA) Closed Cell Foam Tape 3) KM Breathable (Open Cell) Foam Tape 4) KM Mineral Wool & Glass Fiber Thermal / Acoustic Insulation

5) KM Polyethylene PE Closed Cell Backer Foam / Rod 6) Our materials are currently supplied to various industries as outlined below:

Construction Industry Furniture Industry RHVAC Industry

Construction Sealants

Building Insulation/Foam

Adhesive & Protection Tapes

Protective Coating

Firestopping Solutions

Insulation

Adhesive & Protection Tapes Adhesive & Protection Tapes

Sealants

Firestopping Solutions

Sealants

Protective Coating

C

HA

PE

TE

R 2

: P

rod

uct

Su

mm

ary

6

Other Sealant Grades and Adhesive: � SHARPIE Modified Silicone Sealant

Range

� VAROSEAL Polyurethane (PU) Sealant

� EGOSTIK No More Gap Acrylic Sealant

� EGOSTIK No More Nail Adhesive Sealant

� EGOSTIK Non Drying Mastic Sealant

Two Nine Six O Trading Pte Ltd

Your Trusted Material Supplier for Façade, Building, RHVAC & Solar.

2960 provides you an Efficient & Economical material for your building environments:

Momentive – GE Silicone Sealant Range: � All Purpose Sealant for Ducting, Cold room,

Sanitary and general installations.

� Structural Sealants for Glazing and Curtain wall

� Weatherproofing Sealants

� Specialty Sealants for:

o Clean room

o FDA Certified

o Fire Stop / Smoke Stop

o High Temperature

o Expansion Joint

� Construction Sealant Primers

Backer Foam range for Sealant & Other Applications: � Closed Cell Foam:

o KM Polyethylene (PE) Backer Foam

(Round / Square)

o KM HD-EVA Foam Tape

� Opened Cell Foam Tape: o KM Breathable Tape

CH

AP

TE

R 2

: P

rod

uct

Su

mm

ary

7

MAXFLEX™ EPDM Closed Cell Elastomeric Insulation: � Class ‘0’ Fire Rated

� In Tubes and Sheets

� Can be laminated with AL or FSK cladding

HANALON Polyethylene (PE) Closed Cell Insulation: � Class ‘1’ Fire Rated

� In Tubes and Sheets

� Laminated in LLDPE or AL

� Coated with PET film for thermal

enhancement

KM Mineral Wool

Environmental- Friendly, Incombustible,

Acoustic & Thermal Insulation � Environmental- Friendly, zero HCHO & TVOC

� Incombustibility & Heat- Resistance, up to

600oC

� Durable & Extreme Weatherability

� Chemical Resistance

� Sound Absorption

� Thermal Insulation

KM Glass Wool

Environmental- Friendly, Incombustible,

Acoustic & Thermal Insulation � Environmental- Friendly, zero HCHO & TVOC

� Incombustibility & Heat- Resistance, up to

400oC

� Durable & Extreme Weatherability

� Water Resistance

� Sound Absorption

� Thermal Insulation

CH

AP

TE

R 2

: P

rod

uct

Su

mm

ary

8

Special Coating: � WindowGOOP™ Temporary Protective

Peel-able Coating

� MultiGOOP Temporary Protective Peel-

able Coating

� GE SilShield SEC2400

� GE SilShield SEC2500

Silicone Architectural Coating

Protection Film Range: � KM PE Protection Film [Green/ Blue] � KM PE Protection Tape Protection Tape Range: � KM PVC Protection Tape [Black/ White] Cleaning Agent: � Isopropyl Alcohol (IPA) � Xylene

KM Rubber Setting Block for Glazing: � 100% Silicone

� EPDM(Si)

� EPDM

� PVC

� SCR

Waterproofing Membrane for Façade � KM Silicone Seal / Sheet

Tape Range: � KM® Aluminum Foil Tape � KM® Fibreglass Tape � MaxFlex™ EPDM Insulation Foam Tape � Max- Duct Gasket Tape � KM PE Insulation Foam Tape � KM PU Open Cell Tape � KM Acrylic Foam Tape

CH

AP

TE

R 3

: S

ea

lan

t F

ea

ture

& A

pp

lica

tio

n C

ha

rt

9

CH

AP

TE

R 4

: T

wo

- P

art

Str

uct

ura

l G

lazi

ng

Sil

ico

ne

Se

ala

nts

10

GE UltraGlaze® Structural Silicone Sealants [Two- Components]

UltraGlaze®SSG4600 [Accelerated Cure]

UltraGlaze®SSG4400

Uses, Applications Property Significance

High-Modulus silicone elastomeric adhesive,

two- part structural glazing sealant (Part A +

B).

� Primerless Adhesion

� Catalyst options – In Black or Grey

� Adjustable work life

� Low pumping viscosity

� High application rate

� Fast Adhesion build

� Compatible with most GE Insulating

Glass, Structural & Weathersealing

silicones

Primerless Adhesion to: (Test applications always

recommended to verify

adhesion under actual use

conditions.)

Primerless adhesion is desirable when

testing or when experience has

demonstrated that reliable long-term

adhesion may be obtained without primer.

In many critical applications, priming is an

added safety factor.

� Glass

� Most glass coatings

� Most paints

� Most metals

� Concrete and masonry

Dynamic Joint Movement ASTM C719

(Continuous extension and

compression, 1/8” per hour)

Movement capability determines suitability

for known building movement conditions.

Sealants should always be matched with

building design criteria.

± 25 %

(Design restricts movement to ± 12.5 %)

± 25 %

(Design restricts movement to ± 12.5 %)

Minimum Joint Dimensions (Width x depth)

Important: It related to the sealant’s ability to accommodate the required design

movement.

6 mm x 6 mm 6 mm x 6 mm

Maximum Joint Dimensions (Width x depth)

Important: It related to the sealant’s ability to accommodate the required design

movement.

25 mm x 9.5 mm 25 mm x 9.5 mm

Tooling Time [27oC @ 50% R.H.]

Indicates time it takes for a skin to form on

the surface of the sealant bead.

20 – 90 minutes

(Depending on mix ratio)

20 – 45 minutes

(Depending on mix ratio)

Tack-Free Time (Fed. Spec. TT-S-001543A)

Length of time a sealant requires before it

can withstand incidental touch. Important

for handling in many applications.

1 to 2 hours 2 hours

Cure Time [To 3/8” depth @ 27oC and

50% R.H.]

Cure time determine how long a sealant

takes to develop its full properties.

Important in glazing and curtain wall

sealant applications, as well as in field and

plant installations..

1 – 3 hours (Green Strength)

2 – 7 days (Full Cure)

2 – 4 hours (Green Strength)

2 – 7 days (Full Cure)

Application Temperature Range

Broad application temperature range

extends practical working time. + 4 to + 49oC + 4 to + 49oC

Hardness (Shore A) (ASTM D2240)

Extreme hardness can limit movement

capability and long-term performance. 40 40

Tensile Strength (ASTM D1135)

Significant in sealants only when combined

with extension (modulus). Highest tensile

strength best in structural glazing

applications.

63 psi (After 2 Hours)

104 psi (After 4 Hours)

192 psi (Full Cure)

140.6 psi

Peel Strength (ASTM D624)

An indication of elastomeric properties and

adhesion. 65 to 70 ppi 39.1 ppi

PSI Stress @ 50% Extension (1/2” x 3/8” x 2” bead)

Stress at a given extension is an indicator

of sealant modulus. 132 psi 85 psi

Ultimate Elongation (ASTM D412) 256 % 200 %

Sag/ Slump Non- sag required for vertical joints 2.5 mm max 2.5 mm max

VOC Volatile organic content 21 g/L 27 g/L

Performance Range Temperature ranges over which sealant is

expected to maintain elasticity. - 48 to 149oC - 48 to 149oC

Cure Method Important for compatibility decisions. Condensation (Neutral) Condensation (Neutral)

Packaging Indicates what type of equipment is

required for dispensing.

55 gals. Drum (Base),

5 gal. Pail (Catalyst)

55 gals. Drum (Base),

5 gal. Pail (Catalyst)

Color Available Black, Grey Black, Grey

Conformance to ASTM and Federal Specifications

These specifications establish a standard of

quality for one-part, chemically- curing

sealants.

ASTM C-920, Type S, NS, Class 25, Use G & A

ASTM C-1184, Type M, Use G & O

GB16776- 2005

ASTM C-920, Type M, NS, Class 12.5, Use G

& A

ASTM C-1184, Type M, Use G & O

GB16776

TT-S-227E (COM-NBS)

Country of Origin USA USA / Japan / China

CH

AP

TE

R 5

: O

ne

- P

art

Str

uct

ura

l G

lazi

ng

Sil

ico

ne

Se

ala

nts

11

GE UltraGlaze® Structural Silicone Sealants

UltraGlaze® SSG4000E

UltraGlaze® SSG4000AC [Accelerated Cure]

GE Construction SCS1200®

GE SilPruf® SCS2000 [Dual-Purpose]

Uses, Applications

High- Strength, neutral- cure, structural glazing and

weathersealing silicone sealant.

Premium acetoxy-cure glazing

sealant for structural as well as

general purpose glazing.

FDA- Certified

For weatherseals, structural

glazing and general purpose

glazing




conditions.)

� Glass


� Most paints

� Most metals


� Glass

� Glazed surfaces

� Glass blocks

� Metal

� Many plastics

� Glass

� Stone

� Most paints

� EIFs

� Most metals

� Concrete

&

Masonry

� Most

Plastics

� Glazed

surfaces




± 25 % ± 25 % ± 25 % ± 50 %


6 mm x 6 mm 6 mm x 6 mm 6 mm x 6 mm 6 mm x 6 mm


25 mm x 9.5 mm 25 mm x 9.5 mm 25 mm x 9.5 mm 25 mm x 9.5 mm


30 minutes 30 minutes 10 minutes 20 to 30 minutes


2.5 to 4 hours 2.5 to 4 hours 30 minutes 3 to 4 hours


50% R.H.]

5 – 7 days 1 – 2 days 24 hours 3 – 4 days

Application Temperature Range + 4 to + 49oC + 4 to + 49oC + 4 to + 43oC + 4 to + 43oC

Performance Range - 12.8 to 121oC - 12.8 to 121oC - 48 to 204oC -48 to 121oC


39 33 20 to 37 24


160.2 psi 149.1 psi 270 psi 341 psi

Peel Strength (ASTM C794)

39.6 ppi 37.8 ppi 61 ppi 55.5 ppi

PSI Stress @ 50% Extension (1/2” x 3/8” x 2” bead) 102.7 psi 84.5 psi N.A. 47 psi

Ultimate Elongation (ASTM D412) 451 % 433 % 513 % 715 %

Sag/ Slump 2.5 mm max 2.5 mm max 2.5 mm max 2.5 mm max

VOC (WPSTM C1454)

31 g/L 37 g/L 23 g/L 20 g/L

Cure Method Alkoxy (Neutral) Alkoxy (Neutral) Acetoxy Alkoxy (Neutral)

Packaging 591.5 ml Sausage Packs

[12 Sausages / Carton]

591.5 ml Sausage Packs


300 ml Cartridges

[24 Cartridges / Carton]



Color Available Black Black, Grey

Translucent, White, Black,

Aluminum Grey, Bronze

White, Black, Limestone, Light

Grey, Aluminum Grey, Dark Grey,

Precast White, Bronze

Country of Origin Netherlands USA USA USA


ASTM C-920, Type S, NS,

Class 25

ASTM C-1184

ASTM C-920, Type S, NS,

Class 25

ASTM C-1184

ASTM C-920, Type S, NS, Class 25

ASTM C-1184

FDA (21 CFR 175.105)

FDA (21 CFR 175.300)

FDA (21 CFR 177.2600)

NSF Std: No. F51

UL723-79


ASTM C-1184, UL723, ASTM E814

CH

AP

TE

R 6

: W

ea

the

rpro

ofi

ng

Se

ala

nts

12

GE Weatherproofing Silicone Sealants

GE SilPruf® NB SCS9000 [Non Stain, Non Bleed]

GE SilPruf® SCS2000N

GE UltraPruf® II SCS2900

Uses, Applications One-part, non-stain, reduced-bleed

weatherproofing sealant

One-part, Neutral-cure sealant for

weathersealing applications

Neutral-cure for glazing/ concrete/

masonry/ stone. Low-gloss matte finish


recommended to verify adhesion

under actual use conditions.)

� Glass

� Stone

� Most paints

� Most metals

� Glass

� Stone

� Most paints

� EIFs

� Most metals

� Glass

� Polycarbonate

� Vinyl

� EIFs

� Most metals

� Glazed surfaces

� Concrete &

Masonry

� Numerous

Plastics

� Glass

� Stone

� Most paints

� EIFs

� Most metals

� Glazed surfaces

� Concrete &

Masonry

� Most plastics




± 50 % ± 50 % ± 50 %


6 mm x 6 mm 6 mm x 6 mm 6 mm x 6 mm


50 mm x 9.5 mm 50 mm x 9.5 mm 25 mm x 9.5 mm


30 to 40 minutes 20 to 30 minutes 20 to 30 minutes


3 to 4 hours 1.5 to 2 hours 3 hours

Cure Time [To 3/8” depth @ 27oC and 50%

R.H.]

2 – 3 days 3 – 4 days 3 – 5 days

Application Temperature Range + 4 to + 43oC + 4 to + 43oC

Performance Range -48 to 121oC

Up to 177 oC

(under intermittent exposure

-48 to 149oC

Up to 204 oC


-48 to 149oC

Up to 177 oC



27 24 25


244 psi 341 psi 230 psi


30.8 ppi 56.6 ppi 46 ppi

PSI Stress @ 50% Extension (1/2” x 3/8” x 2” bead) - 47.0 psi -

Ultimate Elongation (ASTM D412) 629 % 715 % 745 %

Sag/ Slump 2.5 mm max 2.5 mm max 2.5 mm max

VOC 37 g/L 20 g/L 30 g/L

Cure Method Alkoxy (Neutral) Alkoxy (Neutral)

Packaging 591.5 ml Sausage Packs






Color Available White, Black, Limestone, Light Grey,

Aluminum Grey, Dark Grey, Precast White,

Bronze

White, Black, Dark Grey, Precast White,

Bronze

White, Black, Limestone, Light Grey,

Aluminum Grey

Country of Origin The Netherlands China The Netherlands



ASTM C-1184 (Limestone) ASTM C-920, Type S, NS, Class 50

CH

AP

TE

R 6

: W

ea

the

rpro

ofi

ng

Se

ala

nts

13

GE Weatherproofing Silicone Sealants

GE AP 3600 GE Silglaze® N-10

Uses, Applications One Part, Neutral-Cure, Semi Matte Finish sealant for

glazing and general applications.

One Part, Fast curing, all purpose neutral-cure sealant for

weatherseals, glazing and general applications

Tested for Fugal Resistance by PSB Singapore.

Primerless Adhesion to: (Test applications always recommended to

verify adhesion under actual use conditions.)

� Glass

� Stone

� Most metals

� Mosaic

� Concrete & Masonry

� Glass


� Most paints

� Most Metals

� Concrete & Masonry


(Continuous extension and compression, 1/8” per hour)

± 25 % ± 25 %


6 mm x 6 mm 6 mm x 6 mm


50 mm x 9.5 mm 50 mm x 9.5 mm


15 minutes 10 minutes


40 minutes 30 minutes

Cure Time [To 3/8” depth @ 27oC and 50% R.H.]

2 days 2 days


Performance Range -48 to 149oC

Up to 177 oC

-48 to 149oC

Up to 204 oC

(under intermittent exposure)


26 26


218 psi 240 psi


18.6 lbf 25 ppi

PSI Stress @ 50% Extension (1/2” x 3/8” x 2” bead) - -

Ultimate Elongation (ASTM D412) 400 % 350 %

Sag/ Slump <2 mm 0 mm

VOC 30 g/L 37 g/L

Cure Method Alkoxy (Neutral) Ketoxime (Neutral)

Packaging 500 ml Sausage Packs


310 ml Cartridges

[10 or 24 Cartridges / Carton]

Color Available Black, Limestone

Clear, White, Light Gray, Aluminum Gray, Gray, Dark Brown,

Black, Beige

Country of Origin Korea Japan / Thailand

Conformance to ASTM and Federal Specifications ASTM C-920, Type S, NS, Class 25, JIS A1439


JIS A5758

CH

AP

TE

R 7

: M

od

ifie

d S

ilic

on

e S

ea

lan

ts

14

SHARPIE Modified Silicone Sealants

SHARPIE M MSC1-01

SHARPIE LM MSC1-14

SHARPIE NB-LM MSC1-03

SHARPIE Megahard One MSC1-06

Uses, Applications One-part, non-stain non-bleed,

Medium Modulus Neutral-cure

Modified Silicone sealant for


Tested to meet cleanroom class 100 [ISO Level 5] and below.

Tested for Fugal Resistance by

PSB Singapore.

One-part, non-stain non-bleed,

low Modulus Neutral-cure




Low Modulus Neutral-cure,

non-bleed Modified Silicone

sealant for weathersealing

applications. Engineered to

prevent Zero stain on over-

coated paint


High Modulus Neutral-cure


weathersealing applications.

Engineered for high human traffic conditions




conditions.)

� Fluoropolymer

� Powder coated Paints

� Conversion-coated / anodized aluminium

� Brick

� Terracotta

� Ceramic

� Porcelain

� Concrete

� Natural stones

� Prefabricated panels




± 50 % +100/ -50 % +100/ -50 % ± 25 %





Tack-Free Time 1 hour 1 hour 1 hour 20 minutes

Cure Time [Thickness 6mm]

2 – 3 days 2 – 3 days 2 – 3 days 1 – 2 days

Performance Range -30 to 90 oC -30 to 90 oC -30 to 90 oC -30 to 90 oC


27 20 25 55

Tensile Strength @ Maximum Tensile Stress

117.48 psi 137.79 psi 101.5 psi 261.07 psi


39.4N 31.2N 40.1N 31.7N

PSI Stress @ 50% Extension

69.62 psi 20.31 psi 17.40 psi 145.04 psi

Ultimate Elongation (Aluminum Substrate with

Primer) 260% 780% 550% 170%

Elastic Recovery 75% 67% 42% -

Density 1.39 g/ml 1.39 g/ml 1.36 g/ml 1.40 g/ml

Cure Method Neutral Neutral Neutral Neutral

Packaging 320 ml Cartridges

(10 Cartridges / Carton)

320 ml Cartridges


320 ml Cartridges


320 ml Cartridges


Color Available White, Black, Grey, Light Grey,

Beige

White, Black, Dark Grey, Light

Grey White, Black, Brown Red Black, Light Grey

Please refer to product representative for other colors

Country of Origin Japan Japan Japan Japan


ASTM C920, Type S, Grade NS,

Class 50, Use A,

JIS A 5758


Class 50, Use A,

JIS A 5758


Class 50, Use A,

JIS A 5758


Class 50, Use A,

JIS A 5758

CH

AP

TE

R 8

: S

pe

cia

lty S

ea

lan

ts

15

Specialty Sealants

GE PENSIL® 300 Firestop Joint Silicone Sealant

VAROSEAL® Polyurethane (PU) Sealant

GE TOSSEAL® 811 & 817 Expansion Joint Silicone Sealant

TOSSEAL® 811 [Tooling Required]

TOSSEAL® 817 [Self- Leveling]

Uses, Applications One- part neutral silicone firestop

sealant for use as a component in

fire rated joint systems, especially

designed for use in static or

expansion joints and will provide

a weather- tight seal.

Low modulus & long life

minimizes strain on substrate

surface & the elastomeric quality

allows excellent recovery from

extension & compression cycling.

2-hour fire rated. Suitable for seal in vertical &

horizontal joints between metals,

masonry, concrete and other

common construction materials.

One-part, paintable sealant.

Suitable for cold room & clean

room Class 1000 [ISO Level 6] and below.

One-part, neutral-cure, low modulus joint silicone sealant for

concrete roads and pavements.

Room temperature cure. Easy gunnability over a wide temperature

range.

Superior high & low temperature resistance.

Outstanding Weatherability and water resistance.

Extreme low modularity allows excellent recovery from compression

and expansion. Excellent candidate for concrete joints that subjected

to relatively high join movement.

Suitable for road joints, expansion joints, warehouse floor joints,

parking deck joints, stadium stand joints, etc.




conditions.)

� Glass

� Stone

� Most paints

� EIFs

� Most metals

� Glazed

surfaces

� Concrete

and

masonry

� Concrete &

masonry

� Bathroom &

plumbing

fixtures

� Natural

stone

� Most metal

� Concrete & masonry

� Precast Concrete

� Asphalt

� Most paints

� Most metals

� Wood

� Ceramics




± 50 % ± 25 % + 100% / - 50 %






30 minutes 30 minutes 10 minutes N.A.


3 hours 3 to 5 hours 50 minutes 1 to 2.5 hours

Cure Time [6mm depth @27oC, 50%

R.H.]

5 to 7 days 24 hours max 5 to 7 days 5 to 7 days


Performance Range - 48 to 149oC -48 to 80oC - 48 to 149oC - 48 to 149oC


50 <40 12 8 (@-29oC)

51 (@23oC)


270 psi <426 psi 203 psi 124 kPa


55 ppi 20 ppi 40 ppi 40 ppi

Chemical Resistance Yes No - -

FDA- Approved No No - -

Ultimate Elongation (ASTM D412) 500% 1050 % 1050 %

Sag/ Slump 2.5 mm max 2 mm max 2.5 mm max 2.5 mm max

Cure Method Alkoxy (Neutral) Humidity Cure Neutral Neutral

Packaging 300ml Cartridge


500ml Sausage Packs

[20 Sausages / Carton] 591.5 ml Sausage 20kg Pail

Color Available Limestone, White Off- White, Grey Light Grey Light Grey

Country of Origin USA Korea Japan Japan



ASTM E814,

BS 476: Part 22: 1987

UL 1479 (System)


JIS A5758,

RTA QA R83.4 Specs. For Road

Seals (Australia)

ASTM D5893-04,

RTA QA R83.4 Specs. For Road

Seals (Australia)

CH

AP

TE

R 8

: S

pe

cia

lty S

ea

lan

ts

16

Specialty Sealants

GE TOSSEAL® 78 Super Transparent [Fast Cure]

GE TOSSEAL® 83 [Mildew Resistant]

GE TOSSEAL® 83 AB Anti- Bacterial, Mildew Resistant

GE SEAL IT RIGHT – 168S Sanitary Silicone Sealant [Mildew Resistance]

Uses, Applications One-part, acetoxy type sealant

designed for use in glass-to-glass

glazing.

Cure to a highly durable silicone

rubber on exposure to

atmospheric moisture at room

temperature, and after curing,

has a highly transparent

appearance, much like glass

itself.

Designed for use in glass- to-

glass interior glazing.

Can also be used for adhesive on

showcase assemblies and for

units in optical instruments,

where transparency is a

requirement.

One part, high modulus,

neutral cure silicone sealant

which resists mildew growth

even under prolonged

exposure to high

temperature and humidity.

Suitable for use in sanitary,

plumbing, ACMV and

ceramic tile.

One part, high modulus,

neutral cure silicone sealant

which resists mildew and

bacteria growth even under

prolonged exposure to high

temperature and humidity.

Suitable for use in sanitary,

plumbing, ACMV and ceramic

tile.

One-part, Mildew resistant, durable

high modulus silicone sealant.

For bathtubs, sinks, showers, kitchen

and bathtub plumbing fixtures and

ceramic tiles.




conditions.)

� Glass � Glass � Ceramics

� Glass

� Plastic

s

Metal

s

� Ceramics

� Glass

� Plastics

� Metals

� Ceramic

� Glass

� Most metals

� Most plastics




± 25 % ± 25 % ± 25 % ± 25 %






5 minutes 10 minutes 10 minutes


5 to 10 minutes 25 minutes 25 minutes 10 minutes

Cure Time [6mm depth @27oC, 50%

R.H.]

1 to 2 days 2 days 2 days 7 – 14 days


Performance Range - 48 to 149oC -48 to 149oC -48 to 149oC N.A.


- 22 22 20


- 0.81 MPa 0.77 MPa 232


- 28 N N.A. N.A.

Chemical Resistance N.A N.A N.A N.A

FDA- Approved N.A N.A N.A N.A

Ultimate Elongation (ASTM D412) 150 % 170 % 160 % 360%

Sag/ Slump N.A 0 mm 0 mm <1 mm

Cure Method Acetoxy Ketoxime (Neutral) Ketoxime (Neutral) Humidity Cure

Packaging 333ml Cartridges 333 ml Cartridge 333 ml Cartridge

300 ml Cartridges


Color Available Transparent (Super Clear) Clear, White, Ivory White, Ivory, Light Grey White, Clear

Country of Origin Japan Japan Japan N.A.

Conformance to ASTM and Federal Specifications JIS A 1439

ASTM C920, Class 25

JIS Z 2911

ASTM C920, Class 25

JIS Z 2911 JIS A 1439

CH

AP

TE

R 8

: S

pe

cia

lty S

ea

lan

ts

17

Specialty Sealants

TOSSEAL 80-SC [SUPER CLEAN)

GE Multisil™ SCS5500

x’traseal x’mastic Non- Skinning Mastic Sealant (Non- Drying)

EGOSTIK EG-130 No More Nails

Uses, Applications On-part, alkoxy cure sealant

with low-molecular-weight

siloxane content, designed for

clean room use for the

production of semiconductor

and precision electronic devices. Tested to meet cleanroom Class 1 [ISO Level 3] and below.

One-part, neutral cure sealant

specially developed for plastics

and polycarbonates application

One-part, non-drying polybutene

rubber based mastic that does not

harden but remains rather

permanently soft and paste-like.

Excellent resistance to water vapour

transmission.

Low shrinkage.

For installation of cold storage room

and prefabricated construction.

One-part, high performance

construction adhesive sealant with

strong initial grab and superior

adhesion.

Formulated to bond with a wide

variety of common construction

materials.

Primerless Adhesion to: (Test applications

always

recommended to

verify adhesion

under actual use

conditions.)

� Concrete

� Mill finish aluminum

� Galvanized steel

� Glass

� Glazed surfaces

� Glass blocks

� Metal

� Many plastics

� Most plastics

� Most metals

� Glass

� Wood


� Wood

� PVC

� Particleboard

� Concrete

� Most metals

� Cement

� Brick


(Continuous

extension and


± 25 % ± 50 % < 5 % -


6 mm x 6 mm 6 mm x 6 mm 6 mm x 6 mm -


50 mm x 9.5 mm 50 mm x 9.5 mm N.A. -


5 minutes 30 minutes 10 minutes -

Tack-Free Time (Fed. Spec. TT-S-

001543A)

40 minutes 3 hours 20 minutes -

Cure Time [To 3/8” depth @ 27oC and 50% R.H.]

5 – 7 days 5 - 7 days 3 – 5 days 1 – 3 days

Application Temperature Range

+ 4 to + 43oC + 4 to + 43oC + 4 to + 43oC - 20 to 38 oC

Performance Range NA -48 to 149oC -40 to 80oC - 30 to 60 oC


38 25 26 -


290 psi 270 psi N.A -


N.A. 55 ppi N.A -

Ultimate Elongation (ASTM D412)

410% N.A. N.A -

Sag/ Slump 0 mm 2.5 mm max 2.5 mm max -

Cure Method Alkoxy Acetoxy N.A -

VOC -


[10 Cartridges / Carton] 300 ml Cartridges,

300 ml Cartridges


345ml Cartridges


Color Available White, Light Grey, Ivory, Light

Ivory

Translucent, White, Black, Grey,

Brown White Brown

Country of Origin Japan The Netherlands Malaysia Malaysia


N.A.

ASTM C-920,

FDA (21 CFR 175.105)

NSF Std: No. F51, ASTM C-1184

N.A N.A

CH

AP

TE

R 9

: G

en

era

l P

urp

ose

Se

ala

nts

18

General Purpose Sealants

GE SEAL IT RIGHT - 168 [Mildew Resistance]

GE ALL PURPOSE 268 [Mildew Resistance]

LIBERTY 405 Acrylic Sealant

EGOSTIK EG-120 No More Gap Acrylic Sealant

Uses, Applications One part, fast cure, high

modulus, Mildew Resistance,

silicone sealant. Excellent

temperature resistance, water

resistance, and outstanding

weatherability.

For glass-to-glass and glass-to-

metal sashing; For pre-fabricated

housing, freight containers, cold

storage rooms interior sealing in

building & housing

One part, fast cure, high modulus

Mildew Resistance, silicone

sealant. Superior high/low

temperature resistance, water

resistance, and outstanding

weatherability.

For general glazing, interior &

exterior building joints, doors,

windows, metal roofing &

gutters, flashings, sanitary

applications.

Suitable for ACMV installation in

ductwork to ensure excellent

Indoor Air Quality (IAQ).

One-part, water-based acrylic

sealant that cures to a tougher

cured sealant. Almost odour

free, non-corrosive towards

metal. Paintable with most paint. Good weather ability & UV

stability for general glazing &

joints application.

Suitable for use in ACMV

Ductwork

One-part, high modulus,

Mildew Resistant, non-

sagging, acrylic sealant.

Paintable with most paint, with

good adhesion to most porous

surfaces.




conditions.)

� Glass

� Most metals

� Stone


� Numerous construction

materials

� Glass

� Most metals

� Most plastics

� Wood

� Concrete

� Most metal

� Marble

� Wood

� Concrete

� Most metal

� Marble




± 25 % ± 25 % ± 5 to 12.5 % ± 10 %






10 minutes 30 minutes 5 minutes 10 minutes


20 minutes 25 minutes 10 minutes 30 minutes


50% R.H.]

24 hours max 2 days 7 – 14 days 7-14 days


Performance Range -48 to 149oC -48 to 280oC -10 to 80oC -10 to 75oC


40 26 ≈40 ≈30


290 psi N.A. N.A. N.A.


N.A. 26 ppi N.A. N.A.

Ultimate Elongation (ASTM D412)

200 % N.A. N.A. N.A.

Sag/ Slump <1 mm max <1 mm 2 mm max 0 mm

Cure Method Ketoxime (Neutral) Neutral Humidity Cure Humidity Cure



300 ml Cartridges


Approx. 300 ml Cartridges

[24 Cartridges / Carton] TBA

Color Available Clear, White, Black, Light Gray Clear, White, Black, Light Gray White, Grey White, Grey

Country of Origin Thailand Thailand Malaysia Malaysia

Conformance to ASTM and Federal Specifications ASTM C-920, Type S, NS, Class 25

JIS A 1439 ASTM C-920, Type S, NS, Class 25

ASTM C-920, Type S, NS, Class

25 TBA

TESTED TO BS 476-7

CH

AP

TE

R 1

0:

Co

nst

ruct

ion

Se

ala

nt

Pri

me

rs /

Cle

an

ing

Ag

en

t

19

GE Construction Sealant Primers

GE SS4044P GE SS4004P GE TOSPRIME C

Description GE’s branded construction sealant primers are designed to help promote strong & consistent adhesion of GE branded construction sealants

to surfaces that may be difficult to bond to.

These primers are supplied ready- to- use (i.e. no mixing required) as an easily pourable solution and are intended for application to clean,

dry, frost- free, sound surfaces just prior to sealant installation.

* Trial applications are strongly recommended to verify chemical compatibility

Technical information, laboratory facilities and application engineering are available from Momentive Performance Materials.

Enhanced Adhesion to � Anodized & painted aluminum, mill

� Conversion- coated aluminum, metals &

galvanized metals, copper, brass

� Painted & stainless Steel

� Brick

� Concrete

� Stone

� Terra cotta

� Unglazed ceramics

� Plastics

� Wood

� EIFS

� Anodized & painted aluminum, mill

� Conversion- coated aluminum, metals &

galvanized metals, copper, brass

� Painted & stainless steel

� Brick

� Concrete

� Stone

� Terra cotta

� Unglazed ceramics

� Plastics

� Wood

Color Translucent Clear Translucent Pink

Clear / Colorless

Dry Time (Colder Environment) 5 to 15 minutes 5 to 15 minutes 5 to 15 minutes

Dry Time (Warmer Environment)

3 to 5 minutes 3 to 5 minutes 3 to 5 minutes

Solids Content 15 % 15 % 6 %

Specific Gravity 0.80 0.80 0.91

VOC 636 g/L 624 g/L 859 g/L

Packaging 500 ml Bot 300 ml Bot

Country of Origin USA

Cleaning Agent Isopropyl Alcohol (IPA) Xylene Colourless liquid with a pleasant odour. Completely soluble in water, alcohol and ether.

High purity cleaning agent for façade and other applications.

Also suitable for cleaning any substrates or equipment before installation in Clean room.

Density, @ 15oC 0.788 to 0.809 kg/ L 0.865 to 0.875 kg /L

Distillation range, Initial Boiling Point Dry Point

≥ 81.9oC

≤ 83.3 oC

≥ 135oC

≤ 155oC

Acidity as acetic acid ≤ 0.05 m/m % -

Water ≤ 0.1 wt% -

Residual on evaporation ≤ 5 mg/ 100 ml -

Water miscibility No Opalescence -

Purity ≥ 99.5 m/m % -

Colour, Pt- Co Scale ≤ 10 ≤ 20

Appearance Bright & Clear

Free of Sediment

Clear

Free of Sediment & Haze

Packaging 5 Liter Can; 20 Liter Tin 5 Liter Can; 20 Liter Tin

CH

AP

TE

R 1

1:

Aco

ust

ic /

Th

erm

al I

nsu

lati

on

-

Min

era

l W

oo

l

20

KM Mineral Wool

KM Mineral Wool Board/ Slab

Model Board/ Slab Uses, Applications Outstanding thermal insulation and sound absorption performances.

Core for sound proof walls, fire protection and fire- proofing structures.

Ideal insulation for various tanks, boilers, and thermal equipments.

Also suitable for concrete slab floors and roof decks.

Can be applied with wire mesh, aluminum foil, metal lath, etc.

Density, kg/m3 ASTM D1667 60 80

100

120 140 160

180 200

Thermal Conductivity

20oC 0.036 0.035 0.036 0.038

70oC 0.049 0.044 0.043 0.044

Thermal Shrinkage, oC > 600

Performance Range, oC -20 to 600

Moisture Resistance ASTM C 1104

< 0.02 Vol%

Corrosive Resistance Performance ASTM C 795

< 20ppm soluble chlorides

Thickness Available, mm 25, 50, 75, 100

Width, m 0.6

Length, m 1.2

Packaging Shrink- wrapped polythene


BS 476 : Part 4 : 1970 – Incombustibility

KS L 9103; JIS A 9504

KS F 2805

ASTM C 795 ; USAEC Regulation Compliance

HB – Mark; GR Certification; Environment- Mark;

Noise Reduction KS F2805

Density ( kg/m3)

Frequency (Hz) Noise Reduction Coefficient 250 500 1000 2000

60 0.723 0.954 0.839 0.689 0.801

80 0.684 1.003 0.791 0.690 0.792

100 0.957 1.045 0.892 0.762 0.914

120 0.966 1.031 0.851 0.725 0.893

TESTED TO BS 476-4

CH

AP

TE

R 1

1:

Aco

ust

ic /

Th

erm

al I

nsu

lati

on

- G

lass

Wo

ol

21

KM Glass Wool

KM Glass Wool Blanket Roll

KM Glass Wool Slab

Model Blanket Roll Slab Uses, Applications Compression- packaged into elastic rolls, Clean Roll offers

excellent recovery capability for convenient transportation and

storage, and its light weight and flexibility make applications on

complex layout patterns a breeze.

Ideal thermal and acoustic insulation in buildings (ceilings, walls,

etc.), for heating systems in buildings and commercial spaces

(tank, duct, etc.), for residential water boilers.

Agricultural thermal insulation applications (stables,

greenhouses, warehouses, etc.).

Can be applied with aluminum foil, Kraft paper, vapor barrier, etc.

Clean Mat takes Glass Wool that has been manufactured in a state-

of-the-art facility and wraps it with moisture proof film for enhanced

applicability and condensation prevention performance.

Offering both thermal insulation and sound absorption, Clean Mat

requires no additional moisture proofing called for by the Energy

Saving Design Standards, making it very convenient to work with and

highly economical.

Ideal for residential thermal/ acoustic insulation (ceilings and walls).

Density, kg/m3 ASTM D1667

24, 32 24 32 (High)

Thermal Conductivity

20oC 0.036 0.036 0.034

70oC 0.045

Thermal Shrinkage, oC > 300

Performance Range, oC -20 to 600

Moisture Resistance ASTM C 1104

1.4 % (Weight %)

Corrosive Resistance Performance ASTM C 795

< 120ppm soluble chlorides

Thickness Available 25 50 75

20 kg Width, m 1.0

Length, m 10 5 3

Packaging Shrink- wrapped polythene

Country of Origin Korea

Noise Reduction KS F2805

Density ( kg/m3)

Thickness (mm)

Frequency (Hz) Noise Reduction Coefficient 250 500 1000 2000

24

25 0.20 0.45 0.69 0.86 0.55

50 0.64 0.98 1.06 1.04 0.93

75 0.69 0.89 0.95 0.99 0.88

100 0.94 1.07 1.08 1.06 1.04

32 50 0.54 0.92 1.05 1.04 0.89

40 50 0.53 0.91 1.01 1.03 0.87

48

25 0.25 0.61 0.90 1.02 0.70

50 0.59 0.97 1.08 1.07 0.93

75 0.92 1.10 1.05 1.05 1.03

100 1.03 1.06 1.05 1.07 1.05

64

25 0.20 0.56 0.90 1.01 0.67

50 0.64 0.99 1.07 1.05 0.94

75 0.97 1.02 1.03 1.05 1.02

100 0.99 0.99 1.04 1.05 1.02

80 50 0.71 1.00 1.02 1.03 0.94

TESTED TO BS 476-4

TESTED TO BS 476-4

CH

AP

TE

R 1

1:

Aco

ust

ic /

Th

erm

al I

nsu

lati

on

– E

PD

M C

lose

d C

ell

In

sula

tio

n

22

Insulation Material

MAXFLEX® EPDM Closed Cell Elastomeric Insulation

MAXFLEX® EPDM Closed Cell Elastomeric Insulation without Halogen (Bromide & Chloride)

MAXFLEX® EPDM Closed Cell Elastomeric Insulation

MAXFLEX®EPDM Closed Cell Elastomeric Insulation with Foil- Scrim- Kraft (FSK)

Model MaxFlex ST - Standard MaxFlex HF – Halogen Free MaxFlex HT – High Temp. MaxFlex AL Clad P Uses, Applications For refrigeration, air conditioning,

heating & plumbing applications

Absence of Halogen (Without

Chloride & Bromine ions) & PVC

avoid corrosion of Stainless Steel

tube & in case of fire, minimal

smoke & toxic emission.

Dioxin Free, CFC / HCFC Free, ODP

Free

For Indoor Installation in:

Industrial Plants, Public Transports,

Laboratories, Clean room, Data

centre, Naval Industry

Suitable for Outdoor Installation

with High Temperature Fluid:

� Industrial Plants

� Heating Plants

� Solar Installation

� Hot Pipes, etc.

Additional Aluminum or Foil-

Scrim- Kraft Cladding for

MAXFLEX

Flammability

� Self Extinguishing (ASTM D 635) � UL 94 HV / HB � Class ‘1’ (BS 476 Part 7) � Class ‘0’ (BS 476 Part 6)


68.7

Thermal Conductivity (Width x depth)

-40 -30 -20 -10 0 10 20 30 40

0.029 0.030 0.031 0.032 0.033 0.033 0.034 0.035 0.036

Water Absorption ASTM D1056

1.5

Heat Stability ASTM C 534

[Dimensional Change]

3.5

UV / Ozone Resistance ASTM D 1171

Excellent

Moisture Resistance, µ DIN 52615

1250

Moisture Vapor Transmission, g/m2h ASTM E 96

≈ 0.47

Moisture Permeability, g/Pa.s.m ASTM E 96

9.35 x 10-11

Performance Range -57 to 125oC -57 to 150oC -57 to 180oC -48 to 149oC

MaxFlex harden at -57oC, but can be used even at -200oC

Fungus/ Mildew Resistance ASTM G 21

Passed Passed Passed Passed

Nitrosamine BS EN 12868

Not Detected

RoHs BS EN 12868

Not Detected

Noise Reduction DIN 52 219

36.3 dB

Form Tubes in 2m length, Sheets, Continuous Tubes/ Sheets

Available in FSK (Foil- scrim- kraft), Aluminum Foil lamination and Adhesive Layer

Dimension Available For Enquiries, please contact Sales Representative Packaging

Country of Origin Thailand

TESTED TO BS 476-6

TESTED TO BS 476-7

CH

AP

TE

R 1

1:

Aco

ust

ic /

Th

erm

al I

nsu

lati

on

– F

ibe

rGla

ss I

nsu

lati

on

Ta

pe

23

Insulation Material

KM FIBERGLASS GASKET TAPE

KM FIBERGLASS GASKET TAPE SERIES AGB

Uses, Applications Heavy duty, non-combustible, non-alkali fiberglass gasket tape

with high temperature, oil & grease, and chemical resistance.

Excellent for wrapping tracer steam lines, hose piping, exhaust

manifold insulation wrap, ACMV Exhaust Duct joints and strip

curtains for high temperature ovens.

Heavy duty, non-combustible, non-alkali fiberglass gasket tape with high

temperature, oil & grease, and chemical resistance.

Excellent for wrapping tracer steam lines, hose piping, exhaust manifold

insulation wrap, ACMV Exhaust Duct joints and strip curtains for high

temperature ovens.

Engineered to provide Excellent Oil Repellency & Hydrocarbon Resistance

Thread Count (Warp) 60 per 10cm

Thread Count (Weft) 23 per 10cm

Tearing Strength (Wrap) 640N / 10 x 200-M

Tearing Strength (Weft) 640N / 10 x 200-M

Density 1850 g/m2

Maximum Temperature Resistance 786.4oC

Classification of Fire Reaction: BS EN 13501-1: 2007 +A1: 2009

Combustibility: BS EN ISO 1716 : 2010

Non Combustibility: BS EN ISO 1182 : 2010

Oil Repellency: Hydrocarbon Resistance N.A AATCC Test Method 118-2012 (Grade 8)

Color White

Dimension / Packing Available

T3mm x W19mm x L30m (20rolls / box)

T3mm x W25 mm x L30m (16rolls / box)

Country of Origin Singapore

CH

AP

TE

R 1

2:

Fo

am

/ A

dh

esi

ve

Ta

pe

s

24

Foam / Adhesive Tapes

MaxDuctTape®

MaxTape® KM Aluminum Foil Tape VitalBand Bitumen Tape

Model 50525 VT-420 Uses, Applications Self Adhesive EPDM/ Neoprene

Gasket Foam Tape for air-duct

flange connection

Self Adhesive EPDM elastomeric

Insulation foam Tape with good

tacking strength & long service

life.

Excellence adhesion to all surface

without delamination problem

Joint sealing of Foil- Laminated

fiberglass insulation

For sealing joints, seams against

moisture & vapor penetration

on foil jacketing insulation

Cold applied instant flashing,

sealing and weatherproofing

tape with outstanding

durability.

Designed to provide excellent

adhesion, heat, tear, puncture

and chemical resistance to

chlorides, sulphates, alkalis and

acids.

Flammability � Self Extinguishing (ASTM D 635) � UL 94 HV / HB � Class ‘1’ (BS 476 Part 7) � Class ‘0’ (BS 476 Part 6)

- -


68.7 - -

Water Absorption ASTM D1056

< 5 % by weight - -

Heat Stability ASTM C 534

[Dimensional Change]

3.5 - -

UV / Ozone Resistance ASTM D 1171

Excellent - -

Moisture Resistance, µ DIN 52615

1250 - -

Moisture Vapor Transmission, g/m2h ASTM E 96

≈ 0.47 - -

Moisture Permeability, g/Pa.s.m ASTM E 96

9.35 x 10-11 - -

Performance Range -57 to 125oC -40 to 90oC -

Fungus/ Mildew Resistance ASTM G 21

Passed Passed - -

Nitrosamine BS EN 12868

Not Detected Not Detected - -

Thickness Available 6 mm 3 mm to 50 mm 33 µm 1.5 mm

Dimension Available For enquiries, please contact Sales Representative Packaging

TESA 60100 Fibreglass Tape

tesa®60100 self- adhesive fibreglass tape features the latest developments

in joint tape technology. Excellent aging resistance.

With its very strong & flat fibreglass mesh, it offers durable & long lasting

drywall/ plaster board joints. Very good tear resistance.

Excellent adhesion & the very good tensile strength allow one- time

application & smooth finished joints.

Applications � For fixing & patching small holes and cracks.

� For joining plasterboards

Backing Material Fibreglass

Type of adhesive Acrylic

Adhesion to steel 0.5 N/ cm

Elongation at break 2 %

Tensile strength 49 N/ cm

Total thickness 330 µm

Dimension Please check with Sales Rep.

Color White

TESTED TO BS 476-6

TESTED TO BS 476-7

TESTED TO BS 476-6

TESTED TO BS 476-7

CH

AP

TE

R 1

3:

Fa

çad

e P

rote

ctio

n F

ilm

/ T

ap

e

25

Protective Film / Tape for Glass & Metal

KM Polyethylene (PE) Protection Film / Tape – 8C-G-GREEN-01

KM Polyethylene (PE) Protection Film / Tape – 5C-G-BLUE-02

KM Polyethylene (PE) Protection Film / Tape – 8C-M-Blue-WN-04

KM Polyethylene (PE) Protection Film / Tape – 8C-M-Blue-WN-05

Uses, Applications

� PE protection tape for low adhesion substrate, the tape is coated with water based acrylic emulsion.

� Proven Glue Transfer free on glass and metal.

� Easy to peel off from the protected substrate, no irritant odor.

� High gloss & transparency film with leveling coating surface & no air bubble dots

� Excellent UV resistance & durability

Protection for substrates from being stained, and from scratch or damages during processing & transportation.

Adhesion to: (Test applications always



conditions.)

� Glass

� Most Powder Coated

Metal Surfaces

� Most Solid Surfaces

� Most Anodized Metal

Surfaces

� Most Solid Surfaces

Material Type

LDPE

(Low Density Polyethylene)

LDPE


LDPE


LDPE


Breaking Strength 18 to 20 MPa 18 to 20 MPa 18 to 22 MPa 18 to 22 MPa

Elongation at break 300 to 400% 300 to 400% 300 to 400% 300 to 400%

180o Peel 20 g/in 20 g/in 320 g/in 320 g/in

Looptack 20 g/in2 20 g/in2 280 g/in2 280 g/in2

Heat Resistance (70oC, 3 kg pressure)

4 Cycles of 24 hr each

No Adhesion Failure No Adhesion Failure No Adhesion Failure No Adhesion Failure

High Humidity (50oC, 95%) Tested for 10

Days

No Adhesion Failure No Adhesion Failure No Adhesion Failure No Adhesion Failureq

Outdoor Aging (6 Months)

No Adhesion Failure No Adhesion Failure No Adhesion Failure No Adhesion Failure

Dimension (Master Log)

T 80 µm x W 1240 mm x L 100

m

T 50 µm x W 1240 mm x L 100

m

T 80 µm x W 1240 mm x L 100

m

T 80 µm x W 1240 mm x L 100

m

Dimension (Silted)

Please check with Sales Rep. Please check with Sales Rep. Please check with Sales Rep. Please check with Sales Rep.

Color Available Translucent Green Translucent Blue

CH

AP

TE

R 1

3:

Fa

çad

e P

rote

ctio

n F

ilm

/ T

ap

e

26

Protective Film / Tape for Glass & Metal

KM PVC Protection Film / Tape – 10C-M-B-01

KM PVC Protection Film / Tape – 10C-M-W-02

KM PVC Protection Film / Tape – 10C-M-W-03

KM PVC Static Protection Film

Uses, Applications PVC protective tape for medium adhesion substrate, the tape is coated with water based acrylic

emulsion and rubber glue

Excellence UV resistance and durability; Chemical resistance

� Good wear resistance

Transparent clear static

dissipative film without any

adhesive.

Formulated protecting

static sensitive components

Adhesion to: (Test applications always

recommended to verify adhesion

under actual use conditions.)

� Most Metals

� Glass

� Mirror

� Ceramic Tiles

Material Type

PVC

(Poly Vinyl Chloride)

PVC


PVC


PVC


Breaking Strength 18 to 22 MPa 18 to 22 MPa 18 to 25 MPa ≥ 13 MPa

Elongation at break 200 to 400% 200 to 400% 200 to 300% ≥ 150%

180o Peel 120 g/in 120 g/in 170 g/in N.A

Looptack 280 g/in2 280 g/in2 230 g/in2 N.A

Heat Resistance (70oC, 3 kg pressure)

4 Cycles of 24 hr each

No Adhesion Failure No Adhesion Failure No Adhesion Failure N.A

High Humidity (50oC, 95%) Tested for 10 Days


Outdoor Aging (6 Months)


Dimension (Master Log)

T 100 µm x W 1240 mm x L 100

m

T 100 µm x W 1240 mm x L

100 m

T 100 µm x W 1240 mm x L

100 m

T 90 µm x W 1200 mm x L

500 m

Dimension (Silted)

Please check with Sales Rep. Please check with Sales Rep. Please check with Sales Rep. Please check with Sales Rep

Color Available Black White White Clear

CH

AP

TE

R 1

4:

Pro

tect

ion

Co

ati

ng

fo

r F

aça

de

, B

uil

din

g &

In

teri

or

Wo

rk

27

Temporary Peel-able Protective Coating For Glass & Metal

WindowGOOP MultiGOOP Product Description GOOP is a viscous milky liquid with a slight ammonia odour. GOOP dries to a translucent protective film.

For ease of removal & protection of the underlying substrate, a minimum dry film thickness of 100µm. Due to the highly

thixotropic nature of this product and high viscosity, this is easily achieved by even roller application of a single coat.

A higher film thickness is recommended for exceptionally long service life or unusually abrasive or aggression

conditions, although this is not normally required.

Adhesion to Glass

x Glass

x Aluminium

May be suitable for other materials, recommended substrate test prior to full application.

Density (AS1580 202.1/.2)

1.03 ± 0.03 kg/L 1.05 ± 0.03 kg/L

Viscosity (AS1580 214.1)

120 to 125 Ku (4.8 to 5.0 cps) Thixotropic

Drying Time (100um dry @25oC) 20 mins to 1 hr 30mins to 1 hr

Shelf Life (Unopened Can)

2 Years

Coating Life < 12 Months (For External)

> 24 Months (For Interior)

*Recommended Maximum time is based on exposure data in average conditions. Life may be reduced under extreme

conditions.

Application Temperature 5 to 35oC

Removal Conditions Coating will remove satisfactorily at normal conditions (Typically 0 to 35oC)

Quality Assurance Each batch has undergone stringent QC procedures:

Film appearance, freedom from contaminants, application properties, peel characteristics, pH & performance

Temperature Tolerance Up to 50oC

Color Available Clear

Packaging 20 kg Pail; 200 kg Drum

Country of Origin Australia

CH

AP

TE

R 1

4:

Pro

tect

ion

Co

ati

ng

fo

r F

aça

de

, B

uil

din

g &

In

teri

or

Wo

rk

28

GE SilShield SEC2400 Silicone Architectural Coating

GE SilShield SEC2400 is a high solids, silicone elastomeric coating for use in horizontal & vertical above-

grade waterproofing applications.

It provides a durable, long- term watertight, weatherproof barrier that is not susceptible to color fade,

chalking or degradation from natural weathering.

Primerless Adhesion to � Glass

� Painted Surface

� Stucco

� Masonry

� Concrete

� Urethane Foam

� Wood

� Copper

� Aluminum

� EIFS

Specific Gravity 1.21 g/ ml

Tack Free Time 2 hours

Skin Over Time 30 minutes

Tensile Strength (ASTM D412) 200 psi

Elongation (ASTM D412) 400 %

Crack Bridging 1.59 mm

Elongation at break 2 %

Moisture Vapor Transmission 7.62 Perms (ASTM D1653); 4.67 Perms (ASTM E-94)

VOC 70 g/ L

Packaging Please check with Sales Rep.

Color Please check with Sales Rep.

GE SilShield SEC2500* AWB Silicone air and water-resistive barrier

GE SilShield SEC2500 is an architectural mastic coating for air & water-resistive barrier applications to coat

and seal above-grade wall assemblies.

It provides a durable, long- term protection against air passage and water penetration for an energy

efficient and watertight barrier around the building envelope.

Primerless Adhesion to � Glass

� Painted Surface

� Stucco

� Masonry

� Concrete

� Urethane Foam

� Wood

� Copper

� Aluminum

� EIFS

Tack Free Time 1 - 2 hours

Curing Time 24 hours

Application Temperature Range -10oC to 70oC

Water Vapour Transmission Rate @430um DFT (17mils)

5.5 perms

(ASTM E96)

Nail Sealability @ 430um DFT (17 mils) Passed

ASTM D 1970

UV Exposure 20 + Years

Surface Burning NFPA Class A, UBC Class 1

ASTM E 84

Packaging Please check with Sales Rep.

Color Please check with Sales Rep.

CH

AP

TE

R 1

5:

Ba

ckin

g F

oa

m R

an

ge

fo

r S

ea

lan

t /

Se

ttin

g B

lock

/ W

ate

rpro

ofi

ng

Me

mb

ran

e f

or

Fa

çad

e

29

Spacer Foam Tape (Open / Closed Cell)

KM Breathable Tape (Open- cell) for Structural Glazing & Cladding

KM High Density Ethylene Vinyl Acetate (HD-EVA) Foam (Closed- Cell) for Structural Glazing

Product Description Optimum curing through open cell foam structure which allows air

and moisture to reach silicone. Semi-rigid PU foam substrate is

chemically compatible with all silicones tested.

Condensation prevention on windows, doors and metal systems by

high thermal resistivity of foam substrate.

Superior heat insulation.

Excellent resistance to weather, fungi and oxidation

Excellent balance of high shear resistance adhesion

performance and initial tack.

Outstanding holding power

Optimum curing and prevent air and moisture to reach silicone.

Chemically compatible with all silicones tested. Condensation

prevention on windows, doors and metal systems by high

thermal resistivity of foam substrate. High Temperature

resistance. Excellent resistance to weather, fungi and oxidation

Applications � Structural glazing & cladding

� Good adhesion on aluminum & glass

� Structural glazing & cladding

Sealant Compatibility

� Silicone sealant

� Polyurethane sealant

� Acrylic Sealant

� Butyl sealant

� Polysulfied sealant

� Most cold applied sealant compositions

� Silicone sealant


� Acrylic Sealant

� Butyl sealant



Carrier Urethane HD-EVA

Shape Available Strip / Roll Form Sheet / Roll Form

Density (kg/m3)

497 130 - 140

Adhesive Acrylic Modified Acrylic

Tensile Strength, kPa 1961 1961

Elongation, % 186 140


Performance Range - 42 to 82oC

Short Term: <100

Long Term: <200


26 50

Dynamic Tensile Adhesion (15-minute dwell) (kPa)

416

(ASTM D-3759) 400

Dynamic Shear Adhesion (kPa) 44 (308)

(ASTM D-1002) (250)

Static Shear Adhesion @ room temperature (1 psi load), hours

2000 +

(ASTM D-3654) N.A.

Thermal Conductivity K factor: (W/m•oC) 0.050 N.A.

Water Absorption < 5% < 5%

Outgasing Potential N.A. N.A.

Thickness Available, mm 6.4 mm; 9.5 mm Please check with Sales Rep.


Color Available Black

(Blue Liner)

Black

Sheet- Form: Brown Liner Roll- Form: Green Liner

CH

AP

TE

R 1

5:

Ba

ckin

g F

oa

m R

an

ge

fo

r S

ea

lan

t /

Se

ttin

g B

lock

/ W

ate

rpro

ofi

ng

Me

mb

ran

e f

or

Fa

çad

e

30

Sealant Backing Material

KM Polyethylene Closed Cell

Backer Foam for Sealant - Round KM Polyethylene Closed Cell Backer Foam for Sealant - Square

Product Description An ideal non-absorbent compressible and flexible sealant backing composed of predominantly closed celled PE material. Inserted

into a joint to control depth to create a backstop to allow proper sealant tooling, proper sealant wetting of the joint surfaces and

yield a proper bond breaker between the backer and sealant. Chemically inert and waterproof.

Applications � Construction joint

� Glazing work

Sealant Compatibility � Silicone sealant


� Acrylic Sealant

� Butyl sealant



Carrier LDPE PE

Shape Available Round Block

Density (kg/m3) 33 33 ± 3

Tensile Strength, psi (kPa) 463 >160

Elongation, % 160 >80


Performance Range -40 to 90oC -40 to 90oC

Thermal Conductivity K factor: BTU•in/hr•oF (W/m•oC) 0.036 0.042

Water Absorption < 5% < 5%

Outgasing Potential No Presence No Presence

Thickness Available, mm Please check with Sales Rep. Please check with Sales Rep.

Dimension Please check with Sales Rep. Please check with Sales Rep.

Color Available White, Grey Off- White; Grey

Conformance to ASTM and Federal Specifications KSM3862 AS2329-80

KM Silicone Seal / Sheet KM Silicone Seal / Sheet Vapour / Waterproofing Membrane for Curtain Wall Facades

Product Description Silicone Rubber Sheet is used to provide vapour control layers and waterproof

barriers for curtain wall.

It is manufactured in accordance with ISO 9001 quality assurance system.

Compatible with all GE Silicone Sealants.

Applications � Spacer under / between two metals

Material Silicone

Specific Gravity (ASTM D297)

1.2 ± 0.1 g/ cm3

Hardness, Shore A (ASTM D2240)

50 ± 5


≥ 80 kfg/ cm2

Elongation ≥ 350 %

Tear Strength (ASTM D624, Die C) ≥ 22 kfg/ cm

Aging Properties (200oC, 24 hours, ASTM D573)

160

Hardness Change + 16 to + 52oC

Tensile Strength Change -40 to 90oC

Elongation Change 0.036


Color Available Translucent White

KM Setting Block Range for Glass

Setting block in the form of a spacer for supporting and adjusting a glass

sheet in structure elements, such as windows, doors and the like.

Applications � Setting block for the lower edge of the glass

Material 100% Silicone, SCR, EPDM(Si), EPDM, PVC


Color Available Black

CH

AP

TE

R 1

6:

Str

uct

ura

l A

dh

esi

ve

Fo

am

Ta

pe

31

Structural Tape

KM Acrylic Foam Pressure Sensitive

Tape

Series 3000C 6000C Product Description Double sided acrylic foam tapes that are durable in extreme weather condition.

Closed cell acrylic foam tapes that can be used to replace mechanical fastener, riveting or spot welding due to its high shear strength

and its ability to withstand vibration, heavy stress load and resistance to hot and cold environment.

Can be used in Automotive, Electronics & Electrical, Signage and Construction industries for its good bonding reliability and ease of

use as compared to regular double sided foam tapes.

Due to Inert nature, suitable as membrane barrier to protect PVB Interlayer of Lamin- Glass from De- Lamination

Applications � Construction joint

� Building construction in sign industry

� Structural glazing & cladding � Construction joint

� Building construction in sign industry

Adhesion to: � Most metals, includes Stainless Steel, Aluminum

� Glass

� Wood


Carrier Acrylic Foam Acrylic Foam

Adhesive Acrylic Acrylic

Density (kg/m3)

497 33

Tensile Strength (gf/cm2) (T-block) To Aluminum at room

temperature

(ASTM D-897)

≥ 6000 ≥ 5000

Peel Adhesion (gf/25mm) To Stainless Steel at room

temperature, 180o Peel

(ASTM D-3300)

≥ 3400 ≥ 3800

Holding Power (hour) To Stainless Steel at 80oC

Temperature with 1000g Static Load

>24

To Stainless

Steel at room

temperature

(ASTM D-

1002)

After 20-min ≥ 3000 ≥ 2500

After 24-hr ≥ 4500 ≥ 3500

Temperature Tolerance, oC Short Term: 160

Long Term: 100

Thickness Available, mm Please check with Sales Representative Dimension

Length Available, metre 16.5

Color Available Clear

Release Liner Red PE

CH

AP

TE

R 1

8:

ST

I F

ire

sto

p S

yst

em

s O

ve

rvie

w

32

STI F

irest

op S

yste

ms

Prod

uct R

ange

Ove

rvie

w

CH

AP

TE

R 1

8:

Ve

da

Fra

nce

Bu

ild

ing

Jo

ints

Ove

rvie

w

33

VEDA FRANCE Building Joints Product Range Overview

CH

AP

TE

R 1

9:

Re

cen

t P

roje

ct I

nvo

lve

me

nt

34

Recent Iconic Projects Involvement:

Singapore Sports Hub, Singapore, 2014

Gardens by the Bay, Singapore, 2012

South Beach Residences, Singapore, In-Progress

DUO Residences, Singapore, In-Progress

Singapore University of Technology and Design, Singapore, In-Progress

CH

AP

TE

R 1

9:

Re

cen

t P

roje

ct I

nvo

lve

me

nt

35

Resort World Sentosa, Singapore, 2010

IR Marina Bay, Singapore, 2010

Orchard ION, Singapore, 2009

Orchard ION, Singapore, 2010

Ochard Central, Singapore, 2009

Marina Bay Financial Centre, Singapore, 2011

CH

AP

TE

R 1

9:

Re

cen

t P

roje

ct I

nvo

lve

me

nt

36

The Sail, Singapore, 2009

Bio Polis 2, Singapore, 2007

Fusion Polis, Singapore, 2007

Reflection, Singapore,

1st Project using NB9000 (> 10-years since completion)

Enlarged Picture of its Joints:

CH

AP

TE

R 1

9:

Re

cen

t P

roje

ct I

nvo

lve

me

nt

37

VIVO City, Singapore, 2006

Khoo Teck Puat Hospital, Singapore, 2010

Mapletree Business City, 2010

School of Art, Singapore, 2010

LA SALLE ART School, Singapore, 2007

Singapore Flyer, 2007

CH

AP

TE

R 1

9:

Re

cen

t P

roje

ct I

nvo

lve

me

nt

38

Bishan Depot 2014 ALTEZ @ Anson 2014

368 @ BALESTIER ROAD 2014 ANG MO KIO MRT 2014

CARLTON HOTEL @ TANJONG PAGAR 2014 AUSTVILLE 2014

CASHEREAGH 2014 EQUITY A&A 2014

CET EAST CAMPUS 2014 FABER GREEN 2014

CITY SCAPE AT FARRER PARK 2014 FORESQUE 2014

CLEANTECH 2014 GAN ENG SENG PRI SCH 2014

Cold Hub II 2014 Goodvine Building 2014

CONCOURSE SKYLINE 2014 GOODWOOD RESIDENCE 2014

CONNEXION FARRER PARK HOSPITAL 2014 GREENBANK PARK 2014

CREATIVE A&A 2014 HALLIBURTON 2014

CST 2014 HANA CONDO 2014

CYAN CONDO 2014 HEEREN 2014

LANCER AT JURONG ISL 2014 HOLIDAY INN EXPRESS 2014

LAS2 2014 HOTEL PHOENIX (Orchard Gateway) 2014

LAVENDER BIZ HUB 2014 HP @ Tuas Link 2014

LUCASFILM 2014 HP Building 2014

MAHABODHI MONASTERY P1 2014 International Financial Centre 2014

MARINA SOUTH MRT 2014 JEM 2014

METROPOLIS @ ONE- NORTH 2014 JERVOIS HILL 2014

MEYERISE 2014 JLN TUKANG MEDICAL HUB 2014

NATHAN SUITE 2014 Keong Saik Road 2014

Ng Teng Feng General Hospital @ Jurong East 2014 KEPPEL BAY VISTA 2014

NOUVEL 18 2014 RIVER PARC CONDO 2014

NTU Lee Kong Chian School of Medicine 2014 ROHDE & SCHWARZ 2014

NTUC 2014 SANDY ISLAND 2014

NUH 2014 SCALA CONDO 2014

OCEAN FINANCIAL CENTRE 2014 SCHENKERS Buidling @ Tampines 2014

OXLEY CONDO 2014 SELETAR AEROSPACE 2 2014

P & G- INNOVATION/ BUILDING/ S11111B/ SGIC 2014 SENTOSA SOUTH COVE 2014

PATTERSON 2 2014 Shaw Centre 2014

PORT OF BOTAN 2014 SIM CAMPUS 2014

PROMOS @ Sophia Road - A & A 2014 SINGAPORE LAND TOWER (SLT) LEVEL 45 2014

Singapore Polytechnic 2014 THE BLOSSOM 2014

SKY SUITE 2014 THE LAURELS 2014 SPECIALIST CENTRE 2014 THE VISION 2014 SportsHub Complex @ Kallang 2014 VICTORY THEATRE 2014 ST ELECTRONIC 2014 VIVO CITY - A & A 2014 Stamford American International School 2014 WATERFRONT ISLE 2014 SUNTEC 2014 WEST GATE @ JURONG EAST 2014 TELOK KURAU PRIMARY SCHOOL 2014 White Sands Primary School 2014 Temasek Primary School 2014 WOODLAND TERRACE 2014 BOTANIC STATION 2013 2M2P @ SCIENCE PARK 2013 BOULEVARD VUE 2013 ALTEZ 2013 C483/ C486 MRT 2013 AMK POINT 2013

BOTANIC STATION 2013 C908 DOWNTOWN LINE PHASE CROSS STREET

MRT 2013

BOULEVARD VUE 2013 CAPITAL SQUARE MALL 2013 C483/ C486 MRT 2013 CARLTON CITY PLAZA 2013 C903 BUGIS TUNNEL 2013 CAUSEWAY POINT 2013 C907 DOWNTOWN LINE 2013 CCRC 2013

CH

AP

TE

R 1

9:

Re

cen

t P

roje

ct I

nvo

lve

me

nt

39

CREATE @ NUS (U TOWN) 2013 CET WEST CAMPUS 2013 CUBE 8 @ BALESTIER ROAD 2013 CHANGI BUSINESS PARK 2013 DORSETT HOTEL 2013 CHINA SQUARE 2013 DUPONT 2013 CHINATOWN MRT 2013 FESTIVE HOTEL 2013 CHINATOWN POINT A & A 2013 FLORIDIAN CONDO 2013 CK TANG PLAZA 2013 FULLERTON- UNDERPASS 2013 CLEANTECH 2013 FUSION POLIS 3 2013 ClLOVER BY THE PARK @ BISHAN 2013 GLENEAGLE HOSPITAL 2013 CONNEXION 2013 HOTEL PLAZA @ UPPER PICKERING ST 2013 Marriot Hotel - A & A 2013 HUNDRED TREE 2013 MBFC RESIDENTIAL BLOCK 2013 IMM A & A 2013 MBFC TOWER 3 2013 INFINITE STUDIO @ MEDIAPOLIS 2013 MCE C483 CIRCLE LINE 2013 J CUBE 2013 MILLENIA TOWER 2013 JEM @ Jurong East 2013 NATIONAL HEART CENTR 2013 JUN TAIYO 2013 NIN RESIDENCE 2013 KLA TENCOR 2013 NUH-MED CTR 2013 KRANJI TURF CLUB 2013 OCBC BUILDING 2013 Marina Coastal Expressway C461 2013 OUB FACADE 2013 ST Electronic - A & A 2013 P&G INNOVATION 2013 THE LUXURIE 2013 PLAZA HOTEL @ UPPER PICKERING STREET 2013 THE MINTON 2013 QUAYSIDE RESIDENCE/ SHOPPING CENTRAL 2013 THOMSON REUTERS 2013 REFLECTION 2013 UTS CREVASSE 2013 Rivervale Plaza A&A 2013 Vivo City - A & A 2013 SENTOSA COVE 2013 WATER VIEW 2013 SENTOSA MC06 2013 WEST WOOD 2013 SGH PATHOLOGY 2013 WISHART ROAD 2013 Singapore Turf Club @ Kranji 2013 WYETH Plant - A & A 2013 SINGTEL BUILDING PHASE 2 2013 Audi Showroom A&A WORKS @ CAUSEWAY POINT Bell Helicopter and Cessna Service Facility 2012 ADMORE RESIDENCE 2012 CCRC - The Rock 2012 COMMERCIAL BUILDING @ TANJONG KLING 2012 CHANEL @ NAC 2012 CONTINENTIAL AUTO 2012 CHANGI T1 2012 CREATE @ NUS - A&A WORK PHASE I/II/III 2012 Home Team Academy A&A 2012 DOMUS CONDO 2012 Hougang Point - A&A 2012 Dorsett Residences & Hotel 2012 HYFLUX 2012 Garden By The Bay 2012 Illuma Shopping Centre - A&A 2012 HALLIBURTON 2012 Infinite Studio @ Mediapolis 2012 Harvests @ Woodlands Industrial Park E5 2012 ITE Central @ Ang Mo Kio 2012 Mi Casa Condominum 2012 J-Cube @ Jurong East 2012 MOM @ BENDEMEER 2012 KENG LEE ROAD 2012 NUS University Town - CREATE 2012 KIM LIN CONDO 2012 Ocean Financial Centre 2012 LYNWOOD GROVE 2012 ONE ROCHESTER @ BUONA VISTA 2012 Madison Residence 2012 OUBC BUILDING @ CBD 2012 MARINA BAY SAND (MBS) 2012 PARK ROYAL HOTEL @ UPPER PICKERING STREET 2012 MARITIME MUSUEM @ IR SENTOSA 2012 PSA Vista 2012 MBFC TOWER 1 2012 QUAYSIDE SHOPPING CENTRAL 2012 MDIS 2012 REC Plant - A&A 2012 THE INTEGRA TOWER 2012 REFLECTION 2012 THE MEZZO 2012 RESORT WORLD SENTOSA (RWS) 2012

CH

AP

TE

R 1

9:

Re

cen

t P

roje

ct I

nvo

lve

me

nt

40

THE WHARF RESIDENCE 2012 ROYAL THAI EMBASSY 2012 VENTTUS @ NUS 2012 SAFRA Toa Payoh 2012 VENTUS @ NUS 2012 SANDY ISLAND 2012 VIVA CONDO 2012 SINGAPORE EXPO 2012 Zhongsun Garden 2012 Singapore Pool 2012 UPPER PICKENING STREET 2012 SSMC - EXTENSION 2012 WOODLAND CC 2012 TEMASEK POLYTECHNIC 2012 THE CLIFT 2012 THE BAY HOTEL 2012 79 ANSON - RESEALANT 2011 11 STOREY HOTEL @ TELOK BLANGAH 2011 ASIA TOWER 1 2011 5 STY TAMPINES MALL ( TAMPINES ONE) 2011 BAY FRONT MRT STATION 2011 Far East Plaza A&A 2011 Causeway Point A&A 2011 GARDEN BY THE BAY 2011 Chij St. Theresa - Telok Blangah 2011 GEYLANG EAST CC 2011

CLAYMORE HILL 2011 GRAND PARK HOTEL (Crown Prince) @

ORCHARD 2011

Cliveden @ Grange (Kim Lin Mansion) 2011 HARK ROCK HOTEL 2011 CONCOURSE SKYLINE 2011 HITACHI HOUSE 2011 CREATE @ NUS (U TOWN) 2011 HOTEL MICHAEL 2011 EMERALD HILL CONDO 2011 IMFS 2011 Factory @ 60, Tuas Ave 11 2011 KASARA VILLA 2011 Factory Development @ Tuas Avenue 5 2011 KATONG MALL 2011 PARC CONDO 2011 LONZA PLANT 2 2011 PEARL ISLAND @ SENTOSA 2011 Luxe Ville Condominum 2011 PSA Building - 72 Sty A&A 2011 NEW TECH PARK 2011 Quayside Hotel 2011 NEX @ SERANGOON 2011 RICHMAND PARK CONDO 2011 NTT @ SERANGOON 2011 ROLLS ROYCE PLANT - ACCORD 2011 NTUC INCOME CENTRE 2011 SEASCAPE 2011 NUS, BLK S5: T-LAB 2011 Seletar Airport 2011 ONE SHENTON 2011 SHELFORD CONDO 2011 OUBC @ CBD 2011 SIM LIAN HQ 2011 OUH Building 2011 UBI ONE 2011 SOLEIL CONDO 2011 UNIVESAL STUDIO 2011 Store Hub 2011 WAK HASSAN DRIVE 19 2011 THE INTEGRA TOWER 2011 WOH HUP HQ 2011 TUAS POWER STATION - RESEALANT 2011 MBFC TOWER 2 & 3 - COMMERICAL 2010 NUS S16 & LT31 RESEALANT WORK 2010

MOON HOTEL @ LITTLE INDIA 2010 NATIONAL UNIVERSITY HOSPITAL : ADMIN

BUILDING 2010

MUSTAFA SHOPPING CENTRE A & A WORKS 2010 NGEE ANN POLYTECHNIC EXTENSION 2010 MY VILLAGE @ SERANGOON GARDEN 2010 ONE SHENTON @ SHENTON WAY 2010 DOMUS CONDOMINUM 2010 ION – ORCHARD TURN 2010 DUXTON PINNACLE 2010 OUH BUILDING @ CLIFFORD PIER 2010 DAWN VILLE @ BUTTERWORTH LANE 2010 PARK REGIS @ MERCHANT ROAD 2010 UNITED WORLD COLLEGE SEA @ TAMPINES 2010 GRAND PARK HOTEL @ ORCHARD 2010 EQUITY PLAZA RESEALANT WORK 2010 PARK VIEW CONDOMINUM 2010 SINGAPORE GENERAL HOSPITAL A & A WORKS 2010 PIL BUILDING A & A WORKS 2010 JURONG POINT 2010 24 NEWTON CONDOMINUM 2010 IBM BUILDING A & A WORKS 2010 RAFFLES CITY A & A WORKS [PHASE II] 2010 ICON @ INTERNATIONAL BUSINESS PARK 2010 RAFFLES COUNTRY CLUB A & A WORKS 2010

CH

AP

TE

R 1

9:

Re

cen

t P

roje

ct I

nvo

lve

me

nt

41

JACKSON SQUARE @ TOA PAYOH 2010 RASA SENTOSA A & A WORKS 2010 LUMOS @LEONIE HILL 2010 NEX – SERANGOON HUB 2010 MBFC TOWER 1 2010 SEA VIEW CONDOMINUM 2010 MARINA COLLECTION @ SENTOSA 2010 SHOWA DENKO PLANT A & A WORKS 2010 ASIA SQUARE TOWER 1 2010 SOLEIL CONDOMINUM 2010 BALMEG HILL 2010 SKY ELEVEN @ TOA PAYOH 2010 BIOFARMA, INDONESIA 2010 SKY PARK @ MARINA BAY SANDS 2010 CATERPILLAR PLANT 2010 ST. THOMAS CONDOMINUM 2010 CHANCELLOR HOTEL 2010 STORE HUB @ TAMPINES 2010 CHOA CHU KANG POLYCLINIC 2010 SUPREME COURT A & A WORKS 2010 DOWNTOWN LINE MRT STATION - BAYFRONT 2010 TOKIO MARINE BUILDING 2010 BELLERIVE @ BUKIT TIMAH 2010 KENDALL @SCIENCE PARK II 2010 CIRCLE LINE MRT STATION - BOTANIC 2010 TEMASEK POLYTECHNIC A & A WORKS 2010 CIRCLE LINE MRT STATION – LORONG CHUAN 2010 THE CLIFT 2010 CITY SQUARE MALL 2010 THE ARTE 2010 CLEMENTI MARKET 2010 THE AMERY @TELOK KURAU 2010 CLIVEDEN @ GRANGE ROAD 2010 THE MARQ @ PATERSON HILL 2010 CLOVER BY THE BAY @ BISHAN 2010 TREASURE RESORT HOTEL @ SENTOSA 2010 AALTO @ MEYER ROAD 2010 TURQUOISE CONDOMINUM @ SENTOSA 2010 ALCON @ TUAS SOUTH 2010 INFINITY @ WEST COAST 2009 DAKOTA RESIDENCES 2010 INSPIRA CONDO 2009 GE / KEPPEL TOWER RESEALANT WORK 2010 ILLUMOS 2009

HEEREN SHOPPING CENTRE A&A 2010 LUMIER CONDOMINUM @ MISTRI ROAD 2009

TAN TOCK SENG HOSPITAL A & A 2010 JOO KOON / PIONEER MRT STATION 2009

LIVIACONDOMINUM @ PASIR RIS 2010 KHOO PECK PHUAT HOSPITAL 2009

3M PLANT @ TUAS 2009 LONZA @ TUAS 2009

UOB @ TAMPINES A & A Works 2009 LOKE YEW PROJECT 2009

WATERLOO @ AUSTRALIA 2009 MABATTAN 2009

WATERMARK 2009 MAPLETREE ANSON 2009

WCEGA 2009 MACQUARIE LIBRARY [OVERSEAS PROJECT] 2009

WEST COAST PLAZA 2009 NASSIM HILL CONDOMINUM 2009

WYETH 2009 NATURAL COOL INVESTMENTS @ TAI SENG 2009

YOUTH SCAPE @ CINELEISURE 2009 NEWTON 18 2009

TAMPINES ONE 2009 NUS MD2 2009

CENTENNIAL TOWER A&A 2009 NORTH STAR @ AMK 2009

PARADIZE CENTRE A&A 2009 NTUC BUILDING @ BRAS BESAR 2009

PARAGON SHOPPING CENTRE A&A 2009 OASIS GARDEN 2009

ANGLO CHINESE SCHOOL @ BARKER ROAD 2009 OCEANFRONT CONDOMINIUM 2009

ALLIED MATERIAL 2009 ONE EAST MELBOURNE @ AUSTRALIA 2009

ARDMORE PARK 2 2009 ORCHARD CENTRAL 2009

ATP7 @ AUSTRALIA 2009 313 SOMERSET 2009

BISHAN MRT C853A 2009 PARK HOTEL @ UNILITY ROAD 2009

BUNGALOW @ KINTA ROAD 2009 PICO Art Centre @ KALLANG 2009

CAIRHILL CONDO 2009 PIONEER/JOO KOON MRT 2009

CITY BANK @ CHANGI SOUTH 2009 PIL BUILDING 2009

CITY SQUARE MALL 2009 PSA OFFICE BLOCK 2009

CINTECH IV 2009 PSA VISTA 2009

CIRCLE LINE (C852/C953) 2009 REC MANUFACTURING PLANT @ TUAS 2009

CLARENCE STREET @ AUSTRALIA 2009 RIVERRINE CONDO 2009

CLEMENTI COMMERCIAL BUILDING 2009 SEAFRONT CONDOMINIUM 2009

CH

AP

TE

R 1

9:

Re

cen

t P

roje

ct I

nvo

lve

me

nt

42

CROWNE PLAZA HOTEL @ T3 (REPAIR & REDECORATION) 2009 SEMBAWANG SHOPPING CENTRE 2009

DEVOSHIRE CONDOMINIUM 2009 SOHO @ SELEGIE 2009

DUKE @ NUS 2009 STRAITS TRADING BUILDING 2009

ELIAS ROAD @ PASIR RIS 2009 HIGH STREET P03062 2009

EPPING @AUSTRALIA 2009 INFINITY @ WEST COAST 2009

FERNHILL CONDOMINIUM 2009 INSPIRA CONDO 2009

YOUTH SCAPE @ CINELEISURE 2009 TAMPINES GRANDE 2009

TOWER 15 2009 THE CENTRIS @ JURONG POINT 2009

GINZA PLAZA A & A (WEST COAST PLAZA) 2009 BOTANICA @ HOLLAND ROAD 2008

GLAXOSMITHKLINE PLANT 2009 SINGAPORE GENERAL HOSPITAL - A & A BLK 7 2008

THE MAHAPJARNA BUDDHIST SOCIETY 2009 ABBOTT NUITRITION MANUFACTURING PLANT 2008

HARD ROCK HOTEL @ SENTOSA 2009 AIB APARTMENT 2008

THE COAST 2009 ROXY SQUARE 2008

ANG MO KIO HUB 2008 ROYAL PLAZA 2008

BISHAN MRT C854A 2008 SAF MUSEUM @ DISCOVERY CENTRE 2008

BISHOPGATE 2008 SEAGATE TECHNOLOGY 2008

BMW SHOWROOM @ LENG KEE RD 2008 SEAVIEW CONDOMINIUM 2008

BOON LAY MRT 2008 ST ANNA CHURCH 2008

TEMASEK TOWER 2008 ST REGIS CONDOMINIUM 2008

BOULEVARD CIRCLE LINE 2008 SUNLIGHT TIMBER WAREHOUSE 2008

BUGIS JUNCTION RESEALANT WORKS 2008 TAN SON NHAT AIRPORT @ VIETNAM 2008

CAIRNHILL CREST CONDOMINIUM 2008 THE ESTA 2008

CAROL ISLAND CONDO @ SENTOSA COVE 2008 THE ORION 2008

CALROSE GARDEN 2008 THE SAIL 2008

CHANGI T3 AIRSIDE PARKING BAY 2008 TRINITY CHURCH ( TCC PROJECT ) 2008

CHARLES & KEITH @ TAI SENG 2008 UOL BUILDING 2008

LOT 1 SHOPPING CENTRE @ CHOA CHU KANG 2008 1 DEGREE 15 CLUB @ SENTOSA 2007

CITY SQUARE CONDOMINIUM 2008 SCIENCE CENTRE A&A 2007

COSMOPOLITAN 2008 AMARA SENTOSA HOTEL 2007

DARUL ISHAN PROJECT 2008 CHANGI T3 ROOFING 2007

DOWNTOWN EAST SHOPFRONTS 2008 CHINA EMBASSY 2007

F1 BUILDING 2008 CHUAN COURT 2007

FUSIONOPOLIS PHASE 1 2008 DOMAIN 21 2007

GENETECH @ TUAS 2008 EDWARD LIFE SCIENCE 2007

HARBOURFRONT (6 STOREY OFFICE) 2008 GOLDIN 2007

HAYER @ SOON LEE 2008 GOMBAK CAMP 2007

IMFS 2008 HANDY CONDOMINIUM 2007

KALLANG THEATRE MRT 2008 HIGH STREET CENTRE 2007

LORONG CHUAN MRT C852A 2008 HORTICULTURE CENTRE 2007

MARINA BARRAGE 2008 IMM A & A 2007

MARVELL HQ @ TAI SENG 2008 KALLANG LEISURE DROME 2007

NEW PARK HOTEL A&A 2008 KALLANG TREATRE MRT (C828) 2007

NGEE ANN CITY 2008 LA SALLE ART SCHOOL 2007

NORTH POINT @ YISHUN 2008 LAKESHORE CONDOMINIUM 2007

NTU -TEACHING 2008 ROYAL PLAZA @ SCOTTS ROAD 2007

NUS ALUMNI 2008 SOHO - CENTRAL 2007

ONE TREE HILL 2008 SOITECH WAFER PLANT 2007

ORCHARD PLAZA 2008 ST ANNA CHURCH 2007

ORCHARD SCOTTS (RESEALANTS WORK) 2008 TELEPARK 2007

SEAGATE TECHNOLOGY 2008 THE ICON 2007

NUS ALUMNI 2008 THE LAKESHORE 2007

ONE TREE HILL 2008 VELOCITY 2007

CH

AP

TE

R 1

9:

Re

cen

t P

roje

ct I

nvo

lve

me

nt

43

ORCHARD PLAZA 2008 CLARK QUAY 2006

ORCHARD SCOTTS (RESEALANTS WORK) 2008 SHOWA DENKO 2006

PARK INFINIA 2008 CHANGI AIRPORT TERMINAL 2 2005

PALAIS RENAISSANCE @ ORCHARD ROAD 2008 UNITED SQUARE 2002

PINNACLE 1 @ AUSTRALIA 2008 PLAZA SINGAPURA 2002

CHINATOWN POINT – RESEALANT WORK 2008 RAFFLES CITY, WESTIN HOTEL 1985

RICHLAND @ BEDOK 2008 TEMASEK BUILDING (TREASURY BUILDING) 1985

* Above list only reflects partial of our project references. For detail project references, please contact our sales representatives to further assist you.

18, Fan Yoong Road, Singapore 629 795 Tel: (65) 6267 1300 Fax: (65) 6264 2960

Your Trusted Partner in Material Supply for Construction, Façade, RHVAC & Solar Industry.

Sealant Range

Foam Tapes / Backer Rods

Glass / Metal Protection Film & Coating

Setting Block for Glass

Specialty Coating

Seal The World GREEN -...

Documents

Transcript of Seal The World GREEN -...