SEAL BORE PACKER SYSTEM PERMANENT

____________________________________________________ BOTIL MODEL “BLA-1”,”BRA-1” & “BBA-1” TUBING SEAL RECEPTACLE Product No. BI 995-60, BI 995-61 & BI 995-62 DESCRIPTION & APPLICATION The Models “BLA-1”, “BRA-1” and “BBA-1” Product nos. BI 995-60, BI 995-61 & BI 995-62 tubing Seal Receptacles are used whenever extreme tubing movement is expected due to temperature and pressure changes during treatment and production. This tool is run immediately above any BOTIL Retainer Production Packer and is anchored to the packer by means of an Anchor Seal Nipple. This tool could also be installed above some of the BOTIL retrievable packers such as Lok-Set or Hydrostatic Packer, if they are able to remain set and packed off without applying tubing weight. This tool is available with all J-slot configurations including blank overshot. Tools having J-slot configuration can be retrieved by reengaging the J-pins where blank configuration could be retrieved using a tubing seal receptacle retrieving tool. Model “BLA-1” Product no. BI 995-60 is available with Easy Out and Easy In or Auto Out and Auto in, with Left hand J-slot configuration. Model “BRA-1” Product no. BI 995-61 is available with Easy Out and Easy In or Auto Out and Auto in, with Right hand J-slot configuration. Model “BBA-1” Product no. BI 995-62 is available with Blank Overshot configuration FEATURES/BENEFITS

• 5,10 0r 20 ft. Long slick joints available

• A BF Seating Nipple profile is

incorporated in the upper end of the slick joint to accept a blanking plug for isolating zone. Location of the nipple profile assures minimum debris accumulation on the plug.

• During Running in, J-pins are held

on place by shear screws

• Optional debris barrier completely

surrounds the slick joint.

• Meets NACE standards MR 0175 for H2S service

53-I

SEAL BORE PACKER SYSTEM PERMANENT

____________________________________________________ Specification Guide For “BLA-1”, “BRA-1” and “BBA-1”

Tubing Seal Receptacles

Casing

O.D. In/mm

Weight lb/ft

Min. I.D.

In/mm

Max. I.D.

In/mm

Tool Size

J-Slot Housing

Guide O.D. In/mm

Basic Slick Joint Size (In)O.D.

Max. Seal Bore (In/

mm)

Tubing Size

In/mm

26 26(2.688) 1.87 47.50

2 3/8 60.3 5 1/2

139.70 14-23 4.670 118.62

5.313 134.95 33

4.438 112.73

6 5/8 168.28 33 5.688

144.46 33(3.313) 2.31

58.67 2 7/8 73.0

17-38 5.920 150.37

6.563 166.70 43 43(4.375) 2.81

71.37 3 1/2 88.9 7

177.80 17-35 6.000 152.40

6.625 168.28 46

5.750 146.05 46(4.625) 3.68

93.47 4 1/2 114.3

43 43(4.375) 2.81 71.37

3 1/2 88.9 9 5/8

244.48 32.3-53.5

8.500 215.90

9.125 231.78 46

8.250 209.55 46(4.625) 3.68

93.47 4 1/2 114.3

53-II