SEAL BORE PACKER SYSTEM Bore Packer System - Permanent.pdf · PDF fileSEAL BORE PACKER...
date post
06-Feb-2018Category
Documents
view
233download
8
Embed Size (px)
Transcript of SEAL BORE PACKER SYSTEM Bore Packer System - Permanent.pdf · PDF fileSEAL BORE PACKER...
SEAL BORE PACKER SYSTEM PERMANENT
____________________________________________________ BOTIL MODEL BLA-1,BRA-1 & BBA-1 TUBING SEAL RECEPTACLE Product No. BI 995-60, BI 995-61 & BI 995-62 DESCRIPTION & APPLICATION The Models BLA-1, BRA-1 and BBA-1 Product nos. BI 995-60, BI 995-61 & BI 995-62 tubing Seal Receptacles are used whenever extreme tubing movement is expected due to temperature and pressure changes during treatment and production. This tool is run immediately above any BOTIL Retainer Production Packer and is anchored to the packer by means of an Anchor Seal Nipple. This tool could also be installed above some of the BOTIL retrievable packers such as Lok-Set or Hydrostatic Packer, if they are able to remain set and packed off without applying tubing weight. This tool is available with all J-slot configurations including blank overshot. Tools having J-slot configuration can be retrieved by reengaging the J-pins where blank configuration could be retrieved using a tubing seal receptacle retrieving tool. Model BLA-1 Product no. BI 995-60 is available with Easy Out and Easy In or Auto Out and Auto in, with Left hand J-slot configuration. Model BRA-1 Product no. BI 995-61 is available with Easy Out and Easy In or Auto Out and Auto in, with Right hand J-slot configuration. Model BBA-1 Product no. BI 995-62 is available with Blank Overshot configuration FEATURES/BENEFITS
5,10 0r 20 ft. Long slick joints available
A BF Seating Nipple profile is
incorporated in the upper end of the slick joint to accept a blanking plug for isolating zone. Location of the nipple profile assures minimum debris accumulation on the plug.
During Running in, J-pins are held
on place by shear screws
Optional debris barrier completely
surrounds the slick joint.
Meets NACE standards MR 0175 for H2S service
53-I
SEAL BORE PACKER SYSTEM PERMANENT
____________________________________________________ Specification Guide For BLA-1, BRA-1 and BBA-1
Tubing Seal Receptacles
Casing
O.D. In/mm
Weight lb/ft
Min. I.D.
In/mm
Max. I.D.
In/mm
Tool Size
J-Slot Housing
Guide O.D. In/mm
Basic Slick Joint Size (In)O.D.
Max. Seal Bore (In/
mm)
Tubing Size
In/mm
26 26(2.688) 1.87 47.50 2 3/8 60.3 5 1/2
139.70 14-23 4.670 118.62
5.313 134.95 33
4.438 112.73
6 5/8 168.28 33
5.688 144.46
33(3.313) 2.31 58.67 2 7/8 73.0
17-38 5.920 150.37 6.563 166.70 43 43(4.375)
2.81 71.37
3 1/2 88.9 7
177.80 17-35 6.000 152.40 6.625 168.28 46
5.750 146.05 46(4.625) 3.68 93.47
4 1/2 114.3
43 43(4.375) 2.81 71.37 3 1/2 88.9 9 5/8
244.48 32.3-53.5
8.500 215.90
9.125 231.78 46
8.250 209.55 46(4.625) 3.68 93.47
4 1/2 114.3
53-II
Calalogue.pdfCalalogue.pdf01 Page 1-7-aug-10.pdf
02 Layout-2 (8-17).pdf
03 Layout-4 (18-37).pdf
04 Layout-5 (38-39).pdf
05 Layout-6 (40-54).pdf
06 Layout-7 (55-57)-FN.pdf
07 58-59.pdf
08 60-81.pdf
09 82.pdf
10 83-99.pdf
11 pg100-105.pdf
