SD-CT - Poclain Hydraulics

5
SD-CT Electronic Control Units

Transcript of SD-CT - Poclain Hydraulics

Page 1: SD-CT - Poclain Hydraulics

SD-CTElectronic Control Units

Page 2: SD-CT - Poclain Hydraulics

2 Electronic Control Units SD-CT | High Performance Electronic Control Units SD-CT | High Performance 3

Complies with the machines’ safety requirements

Designed for Off-Road and On-Road applications

Any Off-Road machine placed on the European Community market must meet the 2006/42/

EC directive and the associated standards such as ISO 13849-1. The new SD-CT ECUs provide a high safety level for your control systems. Compatible with the Level d performance level (PL d according to ISO 13849-1), they guarantee compliance with the standards in force.

Designed to serve the most demanding markets, the SD-CT ECUs are compatible for use both

on On-Road and Off-Road applications, particularly because of their electromagnetic compatibility certified by their E marking and their safety-assurance architecture capable of reaching performance level PL d.

Support and expertise in hydraulics & electronics

By choosing the SD-CT ECUs, Poclain Hydraulics provides you with all its know-how and mastery

of electronic control solutions for hydrostatic transmissions. Our experts accompany you in your projects, from the development of a specific control software to the service of cabling your first prototypes thanks to our WISER© service offer. You thus accelerate placing your machines on the market and guarantee their performances from the first turn of the wheel.

Contributing to machine safety

Compatible level PL d

Compatible certified E

Operating safety and unequalled performancesMachine operating safety is now one of the issues that any manufacturer must integrate from the machine design stage.Electronic controll integration allows you to increase the added value of your machines with regard to productivity, energy efficiency and comfort.Poclain Hydraulics is introducing a new range of ECUs, SD-CT 200 and SD-CT 300, capable of meeting these requirements in all regards.

They offer functional security and operational safety capacities in line with the most demanding standards. Their large calculation capacity and the large number of inputs and outputs allow you to efficiently operate your machines’ hydrostatic transmission.

Electronic Control Units SD-CT | High Performance 3

Page 3: SD-CT - Poclain Hydraulics

4 Electronic Control Units SD-CT | High Performance Electronic Control Units SD-CT | High Performance 5

CommunicationCalculation power Robustness

SD-CT ECUs are made efficient by incorporating an electronic architecture built around a 32-bit

microprocessor and a 8-bit auxiliary microprocessor. They have a calculation capacity compatible with your machines’ safety, comfort and energy efficiency requirements. These technical characteristics provide access to sophisticated software functions that guarantee efficient and accurate control of your applications.

The SD-CT ECUs have large communication capacities. The 3 integrated CAN buses allow

you to share information (Internal Combustion Engine, hydraulic components, etc.), and configure and diagnose your machine. Equipped with 42 high-power inputs and 23 high-power outputs, they provide accurate control of the hydrostatic transmission.

SD-CT ECUs are designed to be used in extreme conditions. Operational over a temperature range

of -40°C [-40°F] to +85°C [185°F], they also function in the case of immersion under a metre of water (IP67). Their electromagnetic compatibility (EMC), certified E, makes them compatible with the most demanding uses.

A high added-value offer

IP67Certified E

3 CAN BUS42 inputs + 23 outputs

Microprocessors32 bits + 8 bits

Performances & Added values

The SD-CT ECUs are accompanied by a panel of software components providing you with all of the features required by your machines. You can control all of the hydraulic pumps available on the market. They also allow you to manage transmission errors and their diagnosis.

But it is within a Poclain Hydraulics transmission that they offer their maximum potential: hydraulic pump management, hydraulic motors control, automotive driving mode, power limitation, fuel consumption optimisation, etc. You thus achieve the full added value of Poclain Hydraulics’s system offer.

Page 4: SD-CT - Poclain Hydraulics

Surpassing the individual performances of each componentWe combine our components within our hydrostatic transmission systems. Our

combined expertise in hydraulics, electronics and mechanics, along with our understanding of your applications, enables us to design, manufacture and offer you high added value solutions that meet present and future market expectations.

Minimising the environmental footprintThe intelligence of our systems, namely our experience and competence in electronic

control systems, enables the constant use at the optimum operating point of your machine. This guarantees the best performance whilst minimising fuel consumption.

Speeding up the integration of complex technologyWe place the full range of our know-how at your disposal through our offer of

hydrostatic transmission systems. You minimise your development costs and accelerate the time to market whilst improving the performance of your machines.

Optimising performanceSupplying exactly the right power required whilst maximising reliability, comfort,

personal safety and the safety of equipment: this is our definition of optimising performance, accessible to you thanks to our systems.

Pushing back the boundaries of innovationIn order to establish your competitive advantage on your markets, you are constantly

seeking to extend the range of your machines. The use of electronic transmission control helps to access a limitless panel of comfort, safety and energy-saving functions.

Page 5: SD-CT - Poclain Hydraulics

www.poclain-hydraulics.com