SCV Company Profile

Company Profile

A Global Leader in Industrial Valve Manufacturing

API 6A• Thru Conduit Slab & Expanding Gates• 3 - Piece Trunnion Mounted Balls

API 6D• Thru Conduit Slab & Expanding Gates• 3 - Piece Trunnion Mounted Balls• Full Port Swing Checks• Piston Checks• Dual Plate Checks - Wafer & Flanged• Pressure Balanced Lubricated Plugs

API 600• Wedge Gates• Globes• Standard Swing Checks• Pressure Seal Gates• Pressure Seal Globes• Pressure Seal Checks

ANSI B16.34• 1 & 2 - Piece Flanged Floating Balls• 3 - Piece Full Port Balls

1 www.scvvalve.com

Southern California Valve (SCV) was established in 1972 in Santa Fe Springs, California as a full inline field service provider for valve maintenance and modifications for the oil & gas, pulp & paper, petrochemical, and power industries. In the mid 1970’s, SCV began manufacturing pressure seal valves for the power industry then expanded its product range over the following decades. Currently, SCV manufactures twenty-one valve designs, offering a complete valve solution for almost every application. With a company culture that embraces quality, SCV has grown to be a successful and reputable, privately-held valve manufacturer with facilities in Santa Fe Springs, California and Santa Fe, Texas.

API 6D Piston Check Valves

API 6D Trunnion Ball Valves

API 6A Trunnion Ball Valves

API 6D Thru Conduit Gate ValvesExpanding & Slab Gate Designs

API 6D Pressure BalancedLubricated Plug Valves

API 594 Dual Plate Check ValvesWafer & Lug Designs

API 6D Swing Check Valves

California Operations inventory warehouse

Machining valve components

8” 600 Thru Conduit Expanding Gate Valves completed hydro testing

Southern California Valve 2

FACILITY

SCV’s California Operations facility has 35,000 square feet of manufacturing space, 85,000 square feet of warehousing for completed inventory, and 65 employees. The Texas Operations facility also has 35,000 square feet of manufacturing space, has 48 employees and is home to SCV’s domestic and international sales, engineering, design, and project management departments. The quality departments at both locations consist of 6 members managing quality system implementation, inspection, documentation review and creation.

The Texas location is breaking ground on a 60,000 square foot state-of-the-art production facility expansion. This will increase the assembly area for sizes 24” and above valves and will provide additional square footage for testing, painting, final inspection and shipping. The new expansion will include a lifting capacity of 80,000 pounds, allowing SCV to increase production efficiency on valves 24” and larger. Once the production expansion is complete we will begin the

50,000 square foot warehouse for finished inventory.

PRODUCTS

SCV’s most popular products include our API 6D line for the midstream market. These products include Trunnion Mounted Ball, Thru Conduit Gate (expanding and slab designs), Full Port Swing Check, Piston Checks, and Lubricated Plug valves. In addition to the midstream market we also manufacture valves to meet the upstream, downstream, and power market demands. SCV maintains a $45 Million ready-to-ship inventory which caters to all three markets and includes one of the largest high pressure valve inventories in the US.

Our complete inventory consists of a combination of commodity valves, specialty valves and valves that are uncommon in size, pressure class, trim and body materials for servicing the upstream and downstream markets from wellhead assemblies to petrochemical, refining, industrial, and power markets. Our standard commodity stock items

consist of midstream API 6D products such as Thru Conduit Gate (expanding and slab designs), Trunnion Mounted Ball, Piston and Full Port Swing Check, and Lubricated Pressure Balanced Plug valves in carbon and stainless steel bodies with ENP and stainless trims and a variety of sealing materials to meet all customers service requirements. The API6D products are available in sizes 2” thru 48”, class 150 thru 2500.

SCV stocks common and hard-to-find API 600 downstream products including Bolted Bonnet OS&Y Wedge Gate, Globe, and Check valves in carbon and stainless steel with various trims and sealing materials in sizes 2” thru 48”, class 150 thru 2500. Our inventory of Pressure Seal products include Gate, Globe, and Check valves in WCB, C6, C9, C12, C12A and stainless steel in 2” thru 24”, class 900 thru 2500. Regarding specialty valves, many customers come to us needing an engineered solution for a specific application. SCV is one of the few manufacturers that will build a oneoff valve for a customer. These highly specialized valves are fewer in quantity,

Texas Operations facility 24” 600 Thru Conduit Valve body

24” 1500 Trunnion Mounted Ball Valve

and require intensive engineering as well as more manufacturing time. Specialty items include API 6A Gate valves ranging from 7-1/16”, 9”, 11”, 13-5/8”, 16-3/4” 3000 and 5000 Through Conduit Gate (slab and expanding); 12” 400# TCG for Geothermal service; Double Ball valves in sizes up through 16”; API 6D Single Ball in sizes 22”, 26”, 28” and 32”; and API 6A 2-1/16” 10,000 Ball valves.

CERTIFICATIONS

Both SCV facilities have acquired their own API 6A and API 6D monograms, CE PED certification, ISO 9001:2008 certification, Canadian Registration Numbers (CRN) and implemented an API Q1 Quality Management System.

IMPROVEMENTS

SCV utilizes SAP, a company-wide web based business management system for real-time oversight of all activities performed throughout the organization. Our web based quality system allows procedures and work instructions readily available to personnel on the production

floor for effective monitoring of all production aspects while making all facets of our business function efficiently. Whether its production, receiving, inventory control, or engineering

management - all the departments are tied to these programs providing quick access to all necessary information.

MARKETS

The majority of our customers are based in North America. However, our international market share is steadily growing as we

cater to all global industries including Oil & Gas, Refining, Petro Chemical, and Power. Our SCV office in Amman, Jordan covers the Middle East and North Africa while our global rep network promotes and supports SCV in their various regions.

THE DIFFERENCE

SCV products are USA engineered and designed. Our customer service and superior quality sets us

apart from others. Our $45 million ready-to-ship inventory allows for quick deliveries. We focus on maintaining our large inventory through extending the distribution network. Currently, we have

3 www.scvvalve.com

SCV maintains $45+ million in ready-to-ship

inventory!

Palleted 7-1/16” 5000 PSI Thru Conduit Gate Valves ready for shipping

Assembly of an API 6A 16-3/4”, 5,000 PSI Thru Conduit Gate Valve in our Texas Operations facility

Machining 18” 600 Thru Conduit Gate Valve body



some strategically located warehouses to quickly react to the needs of key areas throughout the US.

QUALITY

Upon completion of our vendor qualification auditing process and closure of action items, SCV’s management strategizes on a proper vendor oversight plan intended to maintain the most demanding levels of quality and performance at all facets of production. From the birth of the steel until shipment

of the final product, traceability and certification from foundries and mills is maintained. Rigorous inspections take place throughout the manufacturing cycle to guarantee quality.

All castings and forgings for API 6D products are being produced to API 6D Quality Specification Level (QSL) 3 requirements which require stringent non-destructive testing. SCV`s extensive NDE consist of 100% WET MAG on every casting and 10% random X-ray of each casting heat. Upon completion of a finished valve, our quality team prepares all documentation by heat and serial number for job book completion. Certificates ranging from foundry MTRs to bolting certifications and elastomer batch reports are maintained.

FIELD SERVICE

SCV offers a field service division equipped with a team of highly trained and well qualified personnel that are ready to tackle anything that comes their way. SCV technicians are available 24/7 in order to provide a wide variety of services

worldwide, including: on site supervision during commissioning and start up, field inspection, as well as maintenance and valve modifications. Additional services include valve installation oversight and training for operations personnel, preventive maintenance programs, and technical support.

SUMMATION

SCV controls quality at every level of the product realization process from procurement of the raw material to final hydro testing. Whether the steel is from the U.S. or Korea, SCV has its own inspectors on site at foundries and mills to check the steel. Positive Material Identification is performed to verify chemical acceptance. In addition, 100% magnetic particle and 10% random radiography examination takes place on all casting heats to verify sound quality at the surface and subsurface of SCV’s steel. While SCV regularly performs standard metallurgical tests, customers may request ultrasonic or x-ray examinations. SCV has Level 2 inspectors who can read x-rays and ultrasonic exams to detect and evaluate

4Southern California Valve

Testing metal composition with PMI gun


Installing packing into Thru Conduit Gate Valve Stainless steel Trunnion Ball Valve components at Texas Operations facility

Shell TAT test on 24” 600 Thru Conduit Expanding Gate Valve30” 600 Thru Conduit Expanding Gate Valves26” 600 Thru Conduit Expanding Gate Valves

any discontinuities and analyze materials. As a standard, SCV performs hydro tests on every valve manufactured to ensure that full compliance with applicable API codes and standards are maintained. In addition to Hydro testing SCV has the capacity to offer high pressure nitrogen tests, submerged nitrogen tests, & Fugitive emission testing.

Additionally, SCV successfully passed the testing to meet Shell TAT Specification MESC SPE 77/300 for API 6D Thru Conduit Expanding Gates & Slab Gates - Sizes: 20” thru 36” - Class: #150, #300, & #600.

5 www.scvvalve.com

Thru Conduit Expanding Gate Valve assembly High pressure submerged Nitrogen test on 30” 600 Thru Conduit Gate Valve

International Organization for Standardization (ISO)

American Petroleum Institute (API)

Texas Facility: API 6A Certification California Facility: API 6A Certification

Texas Facility: API 6D Certification California Facility: API 6D Certification

Canadian Registration Number

• Alberta - 0C07063.2

• New Brunswick - 0C07063.27

• New Foundland & Laborador - 0C07063.20

• Northwest Territory - 0C07063.25

• Novascotia - 0C07063.27

• Nunavut - 0C07063.2N

• Manitoba - 0C07063.24

• Ontario - 0C07063.25

• Prince Edward island - 0C07063.29

• Yukon - 0C07063.2

Certifications & Registrations

ISO 9001:2008 Certificate CE PED Certificate


3

PERSONNEL QTY IN CA QTY IN TX

• Upper Management 2 5• Production Managers 1 1• Engineers 0 2• Project Managers 1 2• QA/QC 5 5• Metallurgists 0 1• Valve Technicians 25 6• Sales 2 5• Marketing 0 2• Shipping & Receiving 5 4• Drafters 0 2• Accounting 2 2• Procurement 1 2• Parts Manager 2 1• Welders - Certified 5 1• Machinists 15 1• Field Services 15 1• Painters 5 1• General Labor 4 1• Drivers 3 2• Testers 10 5

Facilities

Personnel

MANUFACTURING & WAREHOUSING - SANTA FE SPRINGS, CALIFORNIA

• Office: 4,000 SF• Manufacturing Floor: 28,750 SF• Warehouse: 75,000 SF• Shipping: Qty 5 Dock High Loading; Qty 4 Street Level Loading• Annual Tonnage: 15,378 MT

SALES, ENGINEERING, PROJECTS, MANUFACTURING, & WAREHOUSING - SANTA FE, TEXAS

• Office: 5,000 SF• Manufacturing Floor: 25,000 SF• Warehouse: 15,000 SF• Shipping: Qty 4 Street Level Loading• Annual Tonnage: 10,212 MT

7 www.scvvalve.com

4

Operational Equipment

WELDING

• Lincoln 250 AMP AC/DC Powered Welder Generator• Four (4) Lincoln 250 AMP Arc Welder• Lincoln Mod R3S400 400 AMP DC Wire Welder• Lincoln Mod R3S250 250 AMP DC Wire Welder• Lincoln 1000 AMP Submerged Arc Weld Machine• Customer 24” Port Welding Positioner with Foot Control• Two (2) 36” Port Welding Positioner• Lincoln 200 AMP Arc Welder• Esab Mod DTU 5000 500 AMP AC/DC Heli-arc Welder• PowCon Cyclomatic Heli-arc Control System• 350 AMP Miller TIG Welder• Two (2) Miller 300 AMP Portable Art-TIG Machines• 300 AMP TIG Welder (cybertig)• Customer Circle Burning Torch with Power Rotary Table• Five (5) Welding Rod Ovens• Two (2) Acetylene Torch Sets• 600 AMP Sub-arc Hand Held Welding Machine

QA EQUIPMENT

• Forty Two (42) 0” to 24” Calipers (O.D. & I.D. - Dial & Digital)• Twelve (12) 0” to 80” Vernier Calipers• Thirty One (31) 0” to 23” Micrometers (O.D. & I.D. - Dial & Digital)• Five (5) 0” to 24” Depth Micrometers• Forty Nine (49) 400 to 15000 PSI Pressure Guages• Two (2) 1 to 58 Mil Coating Thickness Gauges• One (1) 0” to 18” Height Gauge• One (1) Gage Block Set• Two (2) Hardness Testers• Three (3) 0 to 250 Ft. Lbs. Torque Wrenches• Two (2) PMIs• One (1) Stamping Engraver• Two (2) Granite Measurement Tables

SAWS

• 18” Abrasive Chop Saw with Rolling Conveyor• Welis Model 12” Horizontal Band Saw• Kalamazoo 9” Horizontal Band Saw


Operational Equipment (continued)

CRANES

• Arrow Three Ton 50 x 200 Traveling Bridge Crane• Pettibone Thirty-Two Ton Rough Terrain Crane• Seven (7) AHOC 2-ton ATV Crane• Three (3) One Ton Jib with Hoist• 20 ton P&H Omega ATV Crane• Five (5) One Ton Jib Cranes with Hoists• Five (5) Two Ton Jib Cranes with Hoists• One (1) Five Ton Overhead General Services Crane with Hoists• One (1) Ten Ton Overhead MMM Crane with Hoists• One (1) Twenty Ton Overhead MMM Crane with Hoists• Pettibone Mod 30 -15 Ton 45’ 3 Stage Boom, Diesel Powered Hyd. Crane

EQUIPMENT & MACHINERY

• Two (2) Vertical Mills With 9” x 42” Work Table Amura• Bridgeport 1 HP Rd Arm Vertical Mill with 9” - 42” Work Table• Chin Yuan Msing Mod Engine Lathe C600 4 Jaw, 4 Way Tool Post 31” Swing• Chin Yuan Msing Mod Engine Lathe K730 4 Jaw, 4 Way Tool Post 33” Swing• Two (2) Chin Yuan Msing Mod a 24” x 48” CC Gap Type Engine Lathe 4 Jaw Chuck• 1990 EFCO Mod SI-2 4” to 36” Port Pneumatic Valve Seat Cutting Lapping System• Wotan Mod 3” Horizontal Boring Mill• One (1) Horizontal Mill• Climax Electrical Port Mill Rail• Master Port Electrical Mill Rail• Ransom DBL End Disc Sander Conversion• Lapmaster 36” Lapping Machine• Lion Mod 20” To 120” Engine Lathe 3-4 Jaw Chuck• Foster 80” to 120” Engine Lathe• Monarch 20” x 120” Cc Engine Lathe 3 Jaw Chuck• Nebel 24” x 48” Gap Type Adhesive Bed Engine Lathe 4 Jaw Chuck• Bullard 60” Vertical Turning Lathe Vertical 2-Work Heads• Ta Yi 20” x 36” Gap Type Engine Lathe• 24” x 60” Swing Lathe• 20” x 60” Swing Lathe• VTL Shubara 50” Swing Lathe• Bux Mag Base Drill• Cincinatti Bickford 3” x 9” Col Radial Drill• Pangborn Mod LK-4, 60” Rotoblast Cabinet with Push Button Controls• Pangborn, 80” Rotoblast Cabinet with Push Button Controls• Customer Pneumatic Test Stand• Three (3) Custom Hydro Test Valve Benches• Custom Hydraulic Press 200 Ton & Stand Unit• 30 Ton H-Frame Press with Valve Pressure Test Stand• Spray King 12’ x 7’ Hi Spray Booth with Blower• DeVilbiss Pro Clean 10’ x 12’ paint booth• 16’ x 50’ Training Facility – Climate Controlled• Portable Flange Re-Facer-4”-10”• Protable Flange Re-Facer-10”-70”• Two (2) Hytorc Stealth 8 - 2” thru 5”• Two (2) Hytorc Stealth 4 - 1-7/8” thru 3”• Two (2) Hytorc Hydraulic Pump - 0 thru10,000 PSI• Two (2) Hytorc J-Gun - 3/4” Drive• Two (2) Hytorc J-Gun - 1” Drive

9 www.scvvalve.com

Operational Equipment (continued)

EQUIPMENT & MACHINERY (continued)

• Kelco 36” Sandblast Cabinet with Dust Collector• Lands Gas Powered Steam Cleaner Pressure Washer• Bridgeport, 6 ‘ Radial Arm Drill Press• IR 30 HP Hortz Tank Mounted Air Compressor• One (1) Ingersoll Rand 130 PSI Air Compressor• One (1) SullAir Model # 16-75 125 PSI Air Compressor• One (1) Ingersoll Rand Model # DXR140-1 Compressed Air

Dryer System• One (1) Custom Water Treatment Recycling System• One (1) Hillbro Steam Clean/Pressure Washer• Two (2) IR 50 HP Skid Mounted Air Compressor with Horizontal

Receiver 1000 Gi Vertical• Kent Floor Cleaning Machine, Self Propelled• Two (2) 8000 # Capacity Pallet Scales• Amura 20” VS Ped Drill Press• Small Short Cut Machine 10” Pneumatic Flange Facer• Large Short Cut Machine 17” Pneumatic Flange Facer• Climex Port Pneumatic Flange Facer 24” Max• Climex Port Pneumatic Flange Facer 72” Max• Hi Torque Mod HY-1-SL 1-1/2” Torque Wrench• Two (2) Custom Hydro-Testing Machines• One (1) Mobil High and Low Pressure Testing Cart• Climax Modulate Port Boring and Facing Machine• 36” Anderson Self Contained Pressure Heated Cleaning Machine• Four (4) PED Type Vises• Five (5) Balder 1-1/2” HP Double End Grinders• Three Hundred (300) Sections Steel Pallet Shelving – 14’ high• Schmidt Marking Tools (metal tag stamping machine)• Tur 50 Lathe 24” x 120”• VTL 36” Niles Pond• Lathe Anderson 20” x 72”• Lathe Beohringer 18” x 48”• Lathe Trunmaster 18” x 36”• Two (2) Rottler Portable Boring Bar• Six (6) 1-1/2” Drive Impact Wrenches• 16000# Weld Positioner• Two (2) 120” VTL King Machine• 2-1/2” Drive Hydro• 50” VTL Froriep• Lathe 24” x 72”• Bridgeport Mill

EQUIPMENT & MACHINERY (continued)

• Six (6) 1/2” Drive Manual Torque Wrenches• Four (4) 3/4” Drive Manual Torque Wrenches• Ten (10) Port-A-Cool Swamp Coolers• Two (2) Climax Grease Injection Pump• Two (2) Climax Packining Injection Pump• Zep Lube Distribution with Auto Re-Fill

FORKLIFTS

• Yale 2500 Lb. LPG Powered Forklift 158” Mast, Hard Tire• Datson 7000 Lb. LPG Powered Forklift 159” Mast, Hard Tire• 5000# Clark Forklift, Hard Tire• Two (2) 5000# CAT Forklift, Hard Tire• 3000# White Forklift, Hard Tire• 6000# Komatsu Forklift, Pneumatic Tire (Tamden)• 12000# Hyster Forklift, Hard Tire• 4000# Datsun Forklift, Hard Tire• Two (2) 4000# Nissan Forklift, Hard Tire• 5000# Linde Forklift, Pneumatic Tire• 40’ Genie Scissor Lift, All Terrain Tire• 8000# Hyster forklift, Hard Tire• 6000# Clark Forklift, Hard Tire• 20000# Kaimar Forklift• 25000# Hyster Forklift, Hard Tire• 42000# Wiggins

TESTING

• Two (2) Hydraulic Testing Units - 0 to 3,000 PSI• Three (3) Portable Hydraulic Testing Units - 0 to 10,000 PSI• One (1) Portable Hydraulic Testing Units - 0 to 30,000 PSI• Two (2) Nitrogen Testing Units• One (1) Gas Testing Pit - 20’ x 30’ x 8’

FIELD SERVICE VEHICLE• Generator• Air Compressor• Full Valve Maintenance Capabilities


Partial Customer List

• Addax Petroleum - Nigeria• American Energy• Anadarko• Area Energy• Argus Power• Bechtel Corp• BP Exploration - Alaska• Brea Cannon Oil• British Engineering Serv.• Cal Pine Energy• CB&I Engineering• Centurion Pipeline• Chesapeake Energy• Chevron Pipeline• China Petroleum Pipeline• Citgo• Citi Oriente• Conoco Phillips• Copano Energy• Davidson Pipe & Supply• Devon Energy• DNOW• Dragon Oil• Duke Energy• Eastern Hydro• Edison International• El Dorado Energy• Enbridge• Encana Oil & Gas• Energy Transfer• ENI - Italy• ENPPI - Egypt• Enserca• Enterprise Products• EOG Resources• Exterran• Exxon Mobil - Nigeria• Exxon Mobil - USA• Fel Setel Technip

• GASCO• Grupo Diavaz• Gulf Interstate Eng.• Gulf South Pipeline• Gupco - Egypt• Halliburton - KBR- Brazil• Hunt Oil• IESA Brazil• IMC Chemical• Jennah Hunt Oil• Jordan Phosphate Mines• Kennecot Mining• Kenya Pipeline Co.• Kinder Morgan• Kuwait Oil Co. (KOC)• Linde Gas• Los Angeles Dept Power• Luz Energy• Magellan Midstream Partners, L.P.• Marathon Oil• Masca• Maura Jurong• McJunkin Red Man Corp.• Metanoimpianti• Mission Energy• Momentum Energy• National Oilwell Varco• National Petroleum Construction CO• Nevada Power• NRG Energy• Nuevo Midstream• Nustar• Occidental Permian (OXY)• Odebrecht - Brazil• Pacific Gas & Electric• Panhandle Energy• Paramount Petroleum• PEMEX• Petrobel - Egypt

• Petrobras• Petrojet - Egypt• Petrovesa• Pioneer Natural Resources• Pioneer Pipe & Supply• Plains All American Pipeline, L.P.• Qarun Petroleum - Egypt• QuestStar Engineering• Quicksilver• RAK GAS• Red Cedar Gathering• Reliant Power• Resolute• S&B Engineering• SAFER Exploration• San Diego Gas & El.• Sandridge• Samson Resources• Sempra Energy• Shell• Siemens• Southern Cal. Edison• Southern Union Company• Spec Services• Spectra Energy• Sycamore Cogeneration• Targa Resources• Teppco Nat. Gas Service• Tepsco• Texstar• Total - France• TransAfrica Group• The Gas Company• Wilson Supply• Xcel Energy• XTO Energy• Vanguard Engineering

11 www.scvvalve.com


Partial Project List

CUSTOMER PROJECT NAME PRODUCTS SUPPLIED

• CHEVRON (USA) Sour Creek 26” 900 Ball Valves

• CITGO (USA) WP Coke Drum 30” 150 x 300 Gate Valves

• CONOCO PHILLIPS (USA) Cob Borger 12” 300 Ball Valves - Metal Seated

• HALLIBURTON (Brazil) FPSO P-48 Duplex Globe Valves

• PETROBEL (Egypt) El Gamil Phase 1 – ELPG 50 2” – 10” 150 – 600 Gate, Globe & Check Valves 20”, 26”, 28” & 32” 600 – 900 Ball Valves

• PETROBEL (Egypt) El Gamil – RPP On Shore 2” – 10” 150 – 600 Gate, Globe & Check Valves 20”, 26”, 28” & 32” 600 – 900 Ball Valves

• ENPPI (Egypt) Tuna Field – Tuna Platform 24” 900 Ball Valves with (Mediteranean Sea) Single Acting Piston Actuator

• EOG Resources Peeler Sour Gas Project 8” 150#, 16” 300#, 24” 300# Trunnion Ball Valves, (Atascosa County, TX - Eagle Ford) 12” 300# Swing Checks

• EOG Resources Titan Hub 4” & 8” 600# Trunnion Ball Valves, 6” 600# Piston Checks, (Fowlerton, TX - Eagle Ford) 2” 300#, 2” & 4” 600# Globe Valves

• XTO Energy (USA) Means Field Expansion 4”, 6” & 8” 900# Full Stainless Trunnion Ball Valves (Andrews, TX - Permian Basin) 6” & 8” 900# Full Stainless Dual Plate Wafer Checks

• ETC (USA) Eagle-Ford 31 - 20” 600 Thru Conduit Gate Valves - Expanding 14 - 12” 600 Thru Conduit Gate Valves - Expanding 21 - 10” 600 Thru Conduit Gate Valves - Expanding 39 - 8” 600 Thru Conduit Gate Valves - Expanding 26 - 6” 600 Thru Conduit Gate Valves - Expanding

• TOTAL (France) Yemen LNG – Marib Block 18 3” – 20” 150 – 2500 A350 LF2 Ball Valves (Yemen) 12” – 24” 1500 A182 F316 Cryogenic Ball Valves

• KENYA PIPELINE COMPANY (Kenya) Line 1 Capacity Enhancement 2” – 24” 600 Slab Gate Valves with Electric Act. (Mombassa, Kenya) 2” – 18” 150 Ball Valves with Electric Act. 2” – 14” 900 Swing Check Valves

• PETROBRAS (Netherlands) FSTP P-51, P-52, P-54, P-55 2” – 12” 600 – 1500 Gate, Globe & Check (Brazil) F-51 Duplex Valves

• MARATHON OIL (USA) Train 1 LNG Project 2” – 16” 900 F-51 Duplex Ball Valves (Equatorial Guinea) 2” – 16” 900 F-51 Duplex Swing Check Valves 2” – 6” 900 F-51 Duplex Globe Valves

• PETROJET (Egypt) Tobruk – Sareer Pipeline 34” 600 Slab Gate Valve with Electric Actuation (Northern Africa)

• ENTERPRISE PRODUCTS (USA) Meeker 1 and 2 Replacement 2” – 24” 300 – 900 API 6D Ball Valves (Colorado, USA) 2” – 24” 300 – 900 API 6D Gate Valves

• ANADARKO (USA) Powder River Project 6” – 24” 300 – 900 API 6D Ball Valves (Wyoming, USA) 12” – 24” 300 – 900 API 6D Gate Valves

• EXXON MOBIL (USA) CFZ Project 2” - 12” 900 Gate, Check, & Globe Valves

• EXXON MOBIL (Nigeria) Unit J/G Slot ADD ½” – 8” 1500 Floating & Trunnion Ball Valves Project Number 4500411078 2” – 8” 600 Lug Style Wafer Check Valves

• EXXON MOBIL (Nigeria) Unit J Slot ADD ½” – 8” 1500 Floating & Trunnion Ball Valves Project Number 4500411012 2” – 8” 600 Lug Style Wafer Check Valves

• EXXON MOBIL (Nigeria) Unit J Slot ADD ½” – 8” 1500 Floating & Trunnion Ball Valves Project Number 4500411012 2” – 8” 600 Lug Style Wafer Check Valves

• EXXON MOBIL (USA) Texas 2” – 12” 300 - 600 Trunnion Ball Valves 2” – 12” 150 - 600 Gate and GlobeValves

• EXXON MOBIL (IRAQ) West Qurna1 4” – 20” 600 - 900 Thru Conduit Gate Valves - Expanding

• Petronas (Malyasia) Offshore Platform Isolation Valves 3” - 16” 150#, 24” 900# Metal-to-Metal Seated Trunnion Ball Valves

• SHELL (USA) PINEDALE 2” - 16” 600 Gate Valves

• SHELL (USA) Josh Kimmel 16” 300 Thru Conduit Gate Valves - Expanding Gas Tested

• SHELL (USA) David Dauterive 2” - 150 316 Ball Valves 2” - 10” 600 Swing Check Valves 2” - 6” 600 Gate Valves 2” - 3” 600 Globe Valves

• SHELL (USA) Dan Rolstad 8” 600 Thru Conduit Gate Valves - Expanding

• Spectra Energy (USA) Bobcat Storage Expansion 2” - 24” 1500 Trunnion Ball Valves w/DPE Seats

PRESSURE SEAL GATESCarbon & Stainless Sizes: 2” - 24”Class: 600 - 2500Design: API 600

BOLTED BONNET GLOBESCarbon & Stainless Sizes: 2” - 24”Class: 150 - 2500Design: BS1873 B16.34

PRESSURE SEAL GLOBESCarbon & Stainless Sizes: 2” - 16”Class: 600 - 2500Design: BS1873 B16.34

PRESSURE SEAL CHECKSCarbon & StainlessSizes: 2” - 24”Class: 600 - 2500Design: API 600 B16.34

LUBRICATED PLUGSCarbon SteelSizes: 2” - 36”Class: 150 - 2500Design: API 6D

BOLTED BONNET GATESCarbon & StainlessSizes: 2” - 60”Class: 150 - 2500Design: API 600

COVER PISTON CHECKSCarbon Steel BoltedSizes: 2” - 24”Class: 150 - 2500Design: API 6D

FLOATING BALL VALVES1-PIECE REDUCED PORT2-PIECE FULL PORTCarbon & StainlessSizes: 1/2” - 12”Class: 150 - 1500Design: B16.34

Complete Product Line Call SCV today @ (281) 482-4728 for all your valve needs or visit us on the web @ www.scvvalve.com.

3-PIECE TRUNNION BALLSBOLTED & WELDED BODYCarbon & Stainless Sizes: 2” - 42” Class: 150 - 2500Design: API 6D

3-PIECE FULL PORT BALLSCarbon & StainlessSizes: 1/4” - 3”Class: 3705 W.O.G.Design: B16.34

DUAL PLATE CHECKS WAFER & LUGCarbon & StainlessWafer Sizes: 1.5” - 36”Wafer Class: 150 - 2500Lug Sizes: 2” - 36”Lug Class: 150 - 900Design: API 594

BOLTED COVER FULL PORT SWING CHECKSCarbon & StainlessSizes: 2” - 36”Class: 150 - 2500Design: API 6D

THRU CONDUIT - SLAB & EXPANDING GATESCarbon SteelSizes: 2” - 36”Class: 150 - 1500Design: API 6D

3-PIECE TRUNNION BALLSCarbon & StainlessSizes: 2-1/16” - 13-5/8”Pressure: 2000, 3000 & 5000Design: API 6A

Dear client,

Southern California Valve was established in 1972 as a maintenance and modification company with the ability to provide full in-line valve service and repair. In the mid-1970’s, after experiencing the shortcomings of other valve products in service, SCV manufactured its first valve. Since that time, Southern California Valve has expanded our manufactured products to cover a broad range of valves. Industries served include the power, paper and pulp, oil and gas, and petro-chemical sectors.

Southern California Valve takes sincere pride in our ability to manufacture both commodity and specialty valves that meet and exceed the needs of our customers. All sizes, pressure classes, and metallurgical compositions are managed in house utilizing the strictest quality control measures to ensure the customer’s total satisfaction.

Southern California Valve products include gates, globes, checks, balls, and plugs. Valves utilized throughout the industry must meet rigorous quality and production standards. Southern California Valve has earned its API 6A, API 6D, ISO: 9001, CE-PED, and CRN certifications while operating under the API Q1 Quality Management System.

With years of dedication and commitment to quality, design, and service, Southern California Valve has grown to be one of the premier valve manufacturers in the industry with the largest inventory of high pressure ball, gate, and check valves on the West Coast. We pride ourselves on our high quality products, timely delivery capabilities, and competitive prices.

On behalf of all of the members at Southern California Valve, we thank you for the opportunity to earn your business.

Sincerely,

Sid McCarraPresident, Texas OperationsSouthern California Valve, Co.

Cast Gates, Globes & Checks • Pressure Seal Gates, Globes & Checks • Thru Conduit Gates • Dual Plate Checks • Forged Gates, Globes & Checks • Plugs • 3 - Piece Balls • Floating & Trunnion Balls • Rising Stem Balls

SALES, PROJECTS, ENGINEERING, MANUFACTURING, & WAREHOUSING3521 FM 646 Rd. NorthSanta Fe, TX 77510Phone: (281) 482-4728Fax: (281) 482-9728

MANUFACTURING & WAREHOUSING13903 Maryton Ave.Santa Fe Springs, CA 90670Phone: (562) 404-2246Toll Free: (800) 554-6421Fax: (562) 404-2836

Contact Information

SANTA FE SPRINGS, CALIFORNIAManufacturing & Warehousing

13903 Maryton AveSanta Fe Springs, CA 90670Office: 1-800-554-6421Fax: (562) 404-2836

SANTA FE, TEXASSales, Projects, Engineering, Manufacturing, & Warehousing

3521 FM 646 Rd. NorthSanta Fe, TX 77510Phone: (281) 482-4728Fax: (281) 482-9728

www.scvvalve.com

Cast Wedge Gates & Globes • Pressure Seal Gates, Globes & Checks • Slab & Expanding Thru Conduit G

ates • Pist

on, Swing, &

Full P

ort Chec

ks • W

afer

& Lu

g Des

ign

Dual P

late

Che

cks •

Pre

ssur

e Ba

lanc

ed L

ubric

ated

Plu

gs •

3 - P

iece

Bal

ls •

Floa

ting

& Tr

unni

on B

alls

Rev: SCVCP - 093015

Since 1972, Southern California Valve has been committed to providing quality flow control

products to the Power, Paper & Pulp, Oil & Gas, and Petro Chemical industries.

As one of the largest valve manufacturers on the West Coast, Southern California

Valve’s reputation is unparalleled for producing high quality commodity and

specialty valves. Products range in sizes 1/2” - 42, in pressure classes

from 150# - 2500# and are backed by timely deliveries and

competitive prices.

Call SCV today at (281)482-4728 for all your valve needs

or visit us on the web @ www.scvvalve.com.

SCV Company Profile

Documents

Transcript of SCV Company Profile