8/14/2019 Scream House

1/14

Universal elements and all related indicia 2006 Universal Orlando. All rights reserved.

Please note that this project is not recommended for children. It requires a moderate degree of skill, and the use of a cutting blade, which is extremelydangerous. When using cutting blades always use protective eyewear. Color printing is recommended. This model was designed to be printed onMatte Paper Heavyweight, and the use of white glue is recommended. There are many folds in the model, and it is recommended that you score the fold first, using a dull cutting blade, or other fine, blunt tipped instrument.Black dashed lines represent a mountain fold (a fold which point upward), and orange dashed lines represent a valley fold (the fold points downward). The orange dashed lines are accompanied by a red + at each end. These are to be used as pin guides, so you can poke small holes at the +, flip thesheet over, and score between the holes for a clean valley fold. Read the instructions and study the illustrations carefully before beginning.

Before removing pieces fromsheet, cut all indicated slots.

Optional:Score, cut and fold4 window inserts11A

Optional:Remove windowsfrom first floorsections 1A, 7A, 9A.

Cut T-shape on frontdoor 1A and fold doors

inward.

Page 1 o

8/14/2019 Scream House

2/14

Universal elements and all related indicia 2006 Universal Orlando. All rights reserved.

1A 2A

4A1A, 2A, 4A shown face down andglued along tab edges.Glue window inserts in place.

Fold and glue the4 pillar pieces 6B.

Fold and glue the

porch roof 6A as shown.

Insert porch tabs into slotsof the front wall, and glue thebottom of the pillars withinthe squares on the porch.

Fold down tabs.

Fold down tabs.

5A

3A

6A6B

6B

6B

6B

Fold down the roof 4A.Insert front tab into roof slot.

Glue roof to side tabs.

Insert blue tabs through the 8slots in the porch roof 6A. Fold down and glue pillar tabs.

Slide piece 3A tabs into therear 3 slots around front door.

Glue down tabs on outside.Porch should extend beyond

the front wall.

Fold and glue 3A as shown.

Page 2 o

8/14/2019 Scream House

3/14

Universal elements and all related indicia 2006 Universal Orlando. All rights reserved.

Fold and glue cupola piece 5B as shown.

Fold and glue 2 chimneypieces 11C as shown.

Insert chimney tabs intoroof slots.

Fold and glue 8 chimneystacks 11D as shown and glue

to squares on top of chimneys .

Glue the bottom edges of the brackets to the walls.

Glue left and right sectionsto the middle structure.

Attach 11E and 11F to bothsides of cupola

Glue edge tabsof 9A, 10A and 4C

Glue edge tabsof 7A, 8A and 4B

Glue roof to side taband insert front tab

through slot.Insert floor pieces

8B and 10Bup into bottoms.

Glue cupola piece 5B to dark rectangular area on the roof as show

Page 3 o

9A

4C 4B

8A10A

11Cx211Dx8

7A

10B8B

11E

11F

8/14/2019 Scream House

4/14

SLOT>

SLOT>

SLOT>

SLOT>< SLOT

< SLOT

< SLOT

4A

4 B

4 C

4 C

4 B

4 A

Page 4 o

8/14/2019 Scream House

5/14

1 1 A

x 4

11E

11F

11D x8

1 1 C x 2

Page 5 o

8/14/2019 Scream House

6/14

8 S L O T S

> >

6B

6B

6B

6B

6B x 46A

Page 6 o

8/14/2019 Scream House

7/14

5 S L O T S

>

>

>

>

>

1 A

Page 7 o

8/14/2019 Scream House

8/14

2 A

Page 8 o

8/14/2019 Scream House

9/14

7A

Page 9 o

8/14/2019 Scream House

10/14

8A8B

Page 10

8/14/2019 Scream House

11/14

3A

Page 11 o

8/14/2019 Scream House

12/14

1 S L O T >

5A

5B

Page 12

8/14/2019 Scream House

13/14

10A10B

Page 13

8/14/2019 Scream House

14/14

9A

Page 14