Microbial Strategies for Discoloration and Detoxification ...
(SCRC). - lib.store.yahoo.netlib.store.yahoo.net/lib/buy-hardware-online/catalog.pdf ·...
Transcript of (SCRC). - lib.store.yahoo.netlib.store.yahoo.net/lib/buy-hardware-online/catalog.pdf ·...
Bo
bri
ckJu
ne, 2
00410
TOIL
ET
AN
DB
AT
H A
CC
ES
SO
RIE
STO
ILE
TPA
RT
ITIO
NS
Bo
bri
ckJu
ne, 2
00410
TOIL
ET
AN
DB
AT
H A
CC
ES
SO
RIE
STO
ILE
TPA
RT
ITIO
NS
Introducing Sierra™ Series Solid Color Reinforced Composite (SCRC).The new generation of toilet partitions. See pages 22 and 23.
W A S H R O O MA C C E S S O R I E S
T O I L E TP A R T I T I O N S
2
CLASSIC™ SERIES STAINLESS STEEL ACCESSORIES. Specify for budget jobs:commercial, industrial, foodservice, hospitality, educational, and healthcare.
MATRIX™ SERIES PLASTIC ACCESSORIES. Specify for low-budget jobs:commercial, industrial, retail, foodservice, and healthcare.
CONTURA™ SERIES STAINLESS STEEL ACCESSORIES. Contura features soft, gentle arcs and subtle radiuses with design-echoed flange and corner treatments.Design and fabrication also provide complementary reveals, consistent unidirectional grain, seamless monoform draws, and flush-mounted tumbler locks. Availablein both recessed and surface-mounted models for a distinctive architectural appearance.
TRIMLINE™ SERIES STAINLESS STEEL ACCESSORIES. Specify for upscalebuildings: corporate, commercial, restaurants, hotels, retail and healthcare.
Contura™ Series Stainless Steel Washroom Accessories for a unique designstatement in class-A properties: corporate headquarters, executive officespace, and upscale restaurants and hotels.
Price indices are a comparison of toilet accessories for atypical washroom of popularly specified products. Productmix may affect Price Index comparisons.
WA
SH
RO
OM
AC
CES
SO
RY S
ERIE
S
Contura™ Series Washroom Accessories 1.8TrimLine™ Series Washroom Accessories 1.5Classic™ Series Washroom Accessories 1.0Matrix™ Series Washroom Accessories 0.6
WASHROOMACCESSORIES
PRICEINDEX
TOILETPARTITIONS
PRICEINDEX
TrimLine Series P-Lam Stainless Steel-Edged 2.3DuraLine Series Phenolic/Moisture-Resistant 2.2Sierra Series Solid Color Reinforced Composite (SCRC) 2.1Designer Series P-Lam/Steel-Core Stiles 1.7Classic Series P-Lam/Budget-Priced 1.0
™
™
™
™
™
Price indices are based on a typical Corner-4 layout usingStandard Features. Note: Selected Optional Features willaffect pricing.
Bobrick exclusive: Contura™ Series
3
CLASSIC TM SERIES PLASTIC LAMINATE/BUDGET-PRICED. Specify where costis a major concern: commercial, industrial, retail, foodservice, and hospitality.
DESIGNER TM SERIES PLASTIC LAMINATE/STEEL-CORE STILES. Specify fordesign-integrated color: commercial, foodservice, healthcare, and hospitality.
DURALINE TM SERIES SOLID PHENOLIC/MOISTURE-RESISTANT. Specify forhigh-traffic washrooms: commercial, schools, airports, and public stadiums.
TRIMLINE TM SERIES PLASTIC LAMINATE/STAINLESS STEEL-EDGED. Specifyfor durability and elegant styling: corporate, commercial, restaurants, and hotels.
TOILET P
AR
TITION
SER
IES
SIERRA™ SERIES SOLID COLOR REINFORCED COMPOSITE (SCRC). Compared to standard solid-color material, Sierra Series is engineered for superior non-ghostinggraffiti removal, and scratch, dent and impact resistance, as confirmed by independent ASTM testing. Features include: ultra-hard GraffitiOff™ Surface, Class B firecode compliance, and through-bolted stainless steel hardware; material also withstands hose-down cleaning.
New Sierra™ Series Solid-Color Reinforced Composite (SCRC) Toilet Partitionsare engineered for restroom facilities in heavy-use and abuse, vandal-proneschool, park and criminal justice facilities.
Bobrick exclusive: Sierra™ Series
4
TAB
LE O
F C
ON
TEN
TSTable of ContentsNUMERICAL PRODUCT INDEX 5
WASHROOM ACCESSORIES
COMBINATION TOWEL/WASTE UNITS 6
PAPER TOWEL DISPENSERS 9
WASTE RECEPTACLES 11
ASHTRAYS AND WALL URNS 12
SANITARY NAPKIN/TAMPON VENDORS 13
SureFlo™ SOAP DISPENSING SYSTEM 14
SOAP DISPENSERS 15
MIRRORS 18
WARM-AIR HAND/HAIR DRYERS 20
TOILET PARTITIONS, SCREENS, DIVIDERS, AND DRESSING COMPARTMENTS 22
COLOR GUIDES 23, 25, 31
TOILET COMPARTMENT ACCESSORIES
TOILET TISSUE DISPENSERS 32
TOILET-SEAT-COVER DISPENSERS 34
SANITARY NAPKIN DISPOSALS 34
GRAB BARS 36
SPECIALTY PRODUCTS
BATHROOM ACCESSORIES 38
SHOWER/TUB ACCESSORIES 41
HOOKS/SHELVES/CUSTODIAL ACCESSORIES 42
HEALTHCARE ACCESSORIES 43
CHILDCARE PRODUCTS 43
Los Angeles: 11611 Hart Street North Hollywood, California 91605-5882 Washroom Accessories: (818) 982-9600, FAX: (818) 503-1102 e-mail: [email protected] Toilet Partitions: (818) 982-9070; FAX: (818) 503-9287 e-mail: [email protected]
Jackson, TN: 100 Bobrick DriveJackson, TN 38301-5625 Washroom Accessories: (731) 424-7000, FAX: (731) 424-7800e-mail: [email protected] Partitions: (731) 424-7000, FAX: (731) 265-0578
New York: 200 Commerce DriveClifton Park, NY 12065-1350 (518) 877-7444; FAX: (518) 877-5029e-mail: [email protected]
Canada: Bobrick Washroom Equipment Company45 Rolark Drive, Scarborough, Ontario M1R 3B1(416) 298-1611; FAX: (416) 298-6351 e-mail: [email protected]
International Sales: 11611 Hart Street North Hollywood, California 91605-5882(818) 764-1000; FAX: 818-503-9941e-mail: [email protected]
Australia: Bobrick Washroom Equipment Pty. Ltd. 1800-353158; FAX: 1800-221926
United Kingdom: Bobrick Washroom Equipment Ltd.208-3661771; FAX: 208-3635794
www.bobrick.com, www.thedryercompany.comIllustrations and descriptions herein are applicable to production as of the date ofthis catalog. The manufacturer reserves the right and does from time to timemake changes and improvements in designs and dimensions. Catalog No. P-0406,300M. June 1, 2004. © 2004 Bobrick Washroom Equipment, Inc. Printed in U.S.A.
BOBRICK PRODUCT WARRANTIES AND LIMITATIONS
Product WarrantiesThe following Bobrick products are warranted to be free from defects in workmanshipand material under normal usage from the date of purchase for the periods set forthbelow. (Rust and discoloration to stainless steel parts resulting from exposure toharsh environmental and/or chemical conditions are not considered to be defects inworkmanship or material and there is no express or implied warranty for suchcondition. Refer to Bobrick Advisory Bulletin TB-21, Effective Ways to Clean StainlessSteel.):
Washroom Accessories/Soap Dispensers Limited WarrantyContura™ Series Washroom Accessories 3 yearsSoap Dispensers
B-306, B-4112, B-4063, B-822 Series, 3 yearsB-826B-830 SureFlo™ Soap System Soap Pumps Lifetime warranty provided Bobrick
SureFlo™ Soap is used exclusively withthis product
The following Bobrick mirrors are warranted against silver spoilage from the date ofpurchase for the periods set forth below:
Mirrors Limited WarrantyB-290, B-292 Series 15 yearsB-280 Series 10 yearsB-165, B-166 Series 10 yearsThe following Bobrick hand dryers are warranted to be free from defects in workman-ship and material under normal usage from the date of purchase for the periods setforth below:
Hand Dryers Limited WarrantyAirCraft® Dryers Motor brushes for 3 years; all other parts for 10 years
B-7507, B-750, B-731B-7007, B-700
Eclipse™ Dryers Motor brushes for 3 years; all other parts for 10 yearsB-748, B-740
B-708 AirGuard™ Motor brushes for 3 years; all other parts for 10 yearsB-709 AirPro™ Motor brushes for 3 years; all other parts for 5 yearsB-715 Elan® 5 yearsB-710 Compac™ 1 yearB-705 Cub™ 1 yearThe following Bobrick toilet partition panels, doors and stiles are warranted againstbreakage, corrosion, delamination and defects in workmanship from the date ofpurchase for the periods set forth below (this limited warranty is conditioned on thetoilet partitions being properly installed, used and serviced):
Toilet Partitions Limited WarrantySierra™ Series, 1090 10 yearsDuraLine™ Series, 1080/1180 15 yearsToilet Partition Series not otherwise listed 1 year
(i.e., TrimLine™, Designer™, Classic™ Series)
Other ProductsBobrick washroom accessories not listed above and hardware for all series of Bobricktoilet partitions are warranted to be free from defects in workmanship and materialunder normal usage service for one year from the date of purchase. (Rust anddiscoloration to stainless steel parts resulting from exposure to harsh environmentaland/or chemical conditions are not considered to be defects in workmanship ormaterial and there is no express or implied warranty provided for such condition.Refer to Bobrick Advisory Bulletin TB-21, Effective Ways to Clean Stainless Steel.)
Limitations on WarrantiesIn all instances, the purchaser’s exclusive remedy against Bobrick is for the repair orreplacement, at Bobrick’s option, of warranted defective products or parts. Bobrickwill also bear the cost of the purchaser’s return of defective products or parts toBobrick. Bobrick’s warranties set forth above do not cover damage resulting fromvandalism. No other remedy (including, but not limited to, damages for field laborcharges, lost profits, lost sales, injury to persons or property or any other incidentalor consequential losses) is available.
Bobrick products are protected under one or more of the following Patent Numbers. Australia: 759452, 755057,650604, 645627, 119406, 117107, 116931, 116887, 116057, 116056, 115075, 98659, 98658; Canada:2229760, 2196729, 2080647, 1296148, 91501, 86226, 85550, 85356, 85191, 66460; China: 9700489.9,9700489.7, 9700489.1, 9700487.7; France: 916396; Germany: M9303824.0, M9802686.0, M9802677.1,M9106618.2, M8907718.0; Italy: 76451; Japan: 975886, 945171, 925663, 914551, 910785, 892856;Mexico: 13915, 7414271, 180535, 176170, 170289, 6833, 6270, 6071, 6021, 5966, 5965, 5787;South Korea: 335/93, 230223, 230222, 230221, 230219, 230218, 23020, 112964, 112964-1; Spain:202381/92060535, 129187/4, 129186/6, 128865, 126641; Switzerland: 670040-8, 120128, 119400;Taiwan: UM89861; Thailand: 10112, 5521, 4509, 4501, 4500; United Kingdom: 530419, 2264285, 2073867,2073866, 2073865, 2031213, 2026406, 2026390, 2022641, 2022640, 2018137, 2003959, 2003958;United States: 6502721, 6443411, 6278027, 6131771, 6129245, 6119901, 5988451, 5887762, 5871113,5671097, 5660011, 5642836, 5632414, 5605265, 5476197, 5377908, 5261619, 5226625, 5167345,4964544, 4949877, 4908906, 4881353, 4707933, 2073866, 2073867, D441139, D438344, D426412,D415857, D413419, D401708, D401093, D388578, D387590, D387229, D386027, D385445, D364059,D349649, D342177, D342175, D341724, D340375, D340374, D338361, D334266, D333410, D332889,D332849, D332679, D332542, D332370, D332369, D332368, D332366, D332365, D332196, D332195,D332194, D326581, D313137, D294875, D280167. Other patents pending.
5
MODEL PAGENO. NO.
1030 Series 22–31
1040 Series 22–31
1080 Series 22–31
1090 Series 22–31
1180 Series 22–31
B-132 17
1540 Series 22–31
B-155 17
B-1556 Series 19
B-156 17
B-165 Series 19
B-166 Series 19
B-170 17
B-2014 16
B-203 40
204-1 41
204-2 41
204-3 41
B-205 39
B-207 41
B-211 42
B-2111 16
2111-79 16
B-2112 16
B-2116 42
B-212 42
B-2200 43
B-221 35
2210-40 43
B-2210 43
B-223 43
B-2230 43
B-224 43
B-2250 12
B-2260 12
B-2270 12
B-2280 12
B-2300 12
B-232 42
B-233 42
B-235 10, 43
B-239 43
B-240 12
B-2400 12
251-4 36
252-30 37
2521-30 37
2522-30 37
B-253 10
B-254 35
2562 37
2573 37
2581 37
2583 37
B-261 12
B-262 10
B-2620 10
B-2621 10
B-26212 10
B-263 10
B-264 33
B-265 33
B-270 35
270-12 35
B-272 33
B-273 33
B-2730 33
B-274 33
B-2740 33
B-2746 33
B-27460 33
B-275 12
B-277 12
B-278 12
B-279 12
B-280 Series 18
B-2800 13
B-2808 Series 18
B-2800X2 13
B-282 25 13
283-604 33
B-2840 33
B-2860 10
B-287 42
B-2888 32
B-2890 33
B-2892 32
B-290 Series 18
B-292 Series 18
B-293 Series 19
B-294 Series 19
B-295 42
B-296 42
B-297 40
B-298 42
B-299 40
B-301 35
B-3013 35
B-306 16
B-3094 35
B-318 10
B-347 34
B-3471 34
B-3474 34
B-3479 34
B-3500 13
B-3500X2 13
B-3513 34
B-352 25 13
B-353 35
353-12 35
B-35303 34
B-354 35
B-355 40
B-3552 40
B-357 34
B-3571 34
B-3574 34
B-3579 34
B-359 9
B-35903 9
B-3644 11
B-36703 11
B-367034 11
368-16 6, 11
B-369 8
B-36903 8
B-3699 8
B-3803 7
B-38032 7
B-380328 7
B-38034 7
B-380349 7
B-38038 7
B-3861 9
B-38616 9
B-3888 32
B-3900 6, 7
B-39003 7
B-390034 7
B-3909 6
B-3942 6
B-3944 6
3944-12 6, 11
B-3949 6
B-3960 8
B-39601 8
B-39603 8
B-396034 8
B-3961 8
B-39619 8
B-397 40
B-398 40
B-40 17
B-4063 16
B-4112 16
4112-79 16
B-42 17
B-4221 35
B-4262 10
B-4288 32
B-43500 13
B-43500X2 13
B-435009 13
B-4353 34
B-4354 35
B-4362 9
B-43644 11
B-4369 8
B-43699 8
B-4380 41
B-4388 32
B-4390 41
B-43944 6
B-43949 6
B-490 Series 36, 37
B-4998 37
B-505 43
B-5050 17
B-517 41
B-518 41
B-5181 41
B-519 41
B-5191 41
B-5221 35
B-526 11
B-5262 10
5262-25 10
B-5270 35
B-5277 12
B-52860 10
B-5288 32
B-52891 33
B-529 12
B-530 39
B-550 39
B-5806 Series 36,37
B-5837 37
B-58616 37
B-60 17
B-6047 41
B-6106 Series 36,37
B-6107 41
B-633 43
B-636 41
B-663 32
B-6637 32
B-667 32
B-6677 32
B-669 32
B-6697 32
B-6699 33
B-66997 33
B-670 42
B-6707 42
B-671 42
B-6717 42
B-672 42
B-6727 42
B-673 39
B-674 39
B-676 39
B-677 42
B-6777 42
B-679 38
B-680 38
B-6806 Series 36,37
B-681 39
B-68137 37
B-682 42
B-6827 42
B-683 39
B-685 33
B-6857 33
B-686 33
B-6861 37
B-68616 37
B-6867 33
B-687 39
B-697 32
B-6977 32
B-699 32
B-6997 32
B-6999 33
B-69997 33
B-700 20, 21
B-7007 20, 21
B-705 20, 21
B-708 20, 21
B-709 20, 21
B-710 20, 21
B-72860 10
B-731 20, 21
B-740 20, 21
B-748 20, 21
B-750 20, 21
B-7507 20, 21
7600 Series 38, 39, 42
B-7636 41
B-7671 38, 42
B-76717 38, 42
B-7672 42
B-76727 42
B-7673 39
B-7674 39
B-7676 39
B-7679 38
B-7680 38
B-7685 33
B-76857 33
B-7686 33
B-76867 33
800 Series 39
B-822 15
B-8221 15
B-82216 15
B-8225 15
B-8226 15
B-82265 15
B-826 15
B-830 14
B-8397 40
B-942 19
B-968 42
B-973 39
B-974 41
B-981 42
B-982 42
B-983 42
B-985 42
NU
MER
ICA
L PR
OD
UC
T IND
EXModel Number/Page Reference
Contura™ Series 1.8
TrimLine™ Series 1.5
Classic™ Series 1.0
Matrix™ Series 0.6
PRICE
INDEX
CO
MB
INA
TIO
N T
OW
EL/W
ASTE
UN
ITS
Recessed
BARRIER-FREE WASHROOM GUIDELINESCOMBINATION TOWEL/WASTE UNITS. Access topaper towels should be 15" to 48" (380–1220mm)above the finish floor to allow forward and sidereach by people in wheelchairs. Hinged panelscovering waste receptacle openings should notrequire more than 5 pounds of force (22.2 N) toopen. It is recommended that units projectingmore than 4" (100mm) from the wall be locatedin corners, alcoves, or between other protrudingstructural elements so as not to be a hazard toblind people or interfere with required accessaisles and 60" (1525mm) minimum diameterturning spaces for persons using wheelchairs.
B-3944 CLASSIC SERIES PAPER TOWELDISPENSER/WASTE RECEPTACLE Satin-
finish stainless steel. Seamless beveled flange.Dispenses 600 C-fold or 800 multifold towels.Removable waste receptacle is locked into cabinet.Receptacle is 8" (205mm) deep with capacity of12-gal. (45.4-L); extends 4 1⁄8" (105mm) from wall.Rough Wall Opening: 16" W, 54 œ" H, 4" min. depth(405 x 1390 x 102mm). Av. Mtg. Ht.: 67–74"(1700–1880mm) to top of unit; Barrier-Free, 60 1⁄2"(1535mm).
ƒB-43944 CONTURA SERIES PAPER TOWELDISPENSER/WASTE RECEPTACLE Satin-
finish stainless steel. Flush tumbler lock. Dispenses600 C-fold or 800 multifold towels. Waste receptaclehas 16-gal. (60.6-L) capacity; extends 5 1⁄8" (130mm)from wall. Removable front panel for easy cleaning.Clips secure furnished reusable vinyl liner. Rough WallOpening: 16" W, 54 œ" H, 4" min. depth (405 x 1390x 102mm). Av. Mtg. Ht.: 67–74" (1700–1880mm) totop of unit; Barrier-Free, 61 1⁄4" (1555mm). Patented.
ƒ
B-43944 B-3944
6 ƒ USA & Canada QuickShip model. ƒƒ USA QuickShip model.
173/16"435mm41/8"
105mm
4"100mm
541/8"1375mm
1"25mm155/16"
390mm
56"1420mm
23"585mm
181/8"460mm
351/2"900mm
RECESSED, SEMI-RECESSED AND SURFACE-MOUNTED MODELS
Depth of Wall Space Available
StandardRecessed Less than 2" (51mm) 2" to 4" 4" to 75⁄8" 75⁄8" (194mm) Waste
Model must be Surface Mounted (51–102mm) (102–194mm) or more Capacity
ƒƒ B-3900 Æ 12-gal. (45.4-L)
B-3909 Æ 12-gal. (45.4-L)
ƒ B-3942 Æ 12-gal. (45.4-L)
ƒ B-3944 Æ Æ 12-gal. (45.4-L)
ƒ B-3949 Æ 12-gal. (45.4-L)
ƒ B-43944 Æ Æ 16-gal. (60.6-L)
B-43949 Æ 16-gal. (60.6-L)
Reusable Heavy-Gauge Vinyl Liner: Order Part No. ƒ3944-12 for above models.
541/8"1375mm
191/4"490mm
155/16"390mm
541/4"1430mm
26"660mm
35"890mm
177/16"445mm
315/16"100mm
51/8"130mm
7
CO
MB
INA
TION
TOW
EL/W
ASTE U
NITS
B -3803 TRIMLINE SERIES PAPER TOWEL
DISPENSER/ WASTERECEPTACLE Satin-finish stainlesssteel. Door has 90° return, concealsflange. Dispenses 600 C-fold, 800multifold or 1100 single-fold towels.Removable, leak-proof, 6.3-gal.(24-L) waste container. Rough WallOpening: 11 1⁄2" W, 53 5⁄8" H, 5 œ"min. depth (290 x 1360 x 145mm). Av. Mtg. Ht.:67–74" (1700–1880mm) to top of unit; Barrier-Free,60 œ" (1545mm).B-38038 Similar to B-3803, but covered receptacle.
B-38034 Similar to B-3803, but requires 3 œ" (95mm)min. depth. Waste capacity: 3.8-gal. (14.4-L). DispensesC-fold and multifold towels.B-380349 Similar to B-38034, but with stainless steelskirt for surface mounting.
B-3900 CLASSICSERIES PAPER
TOWEL DISPENSER/ WASTERECEPTACLE Satin-finishstainless steel. Seamlessbeveled flange. Dispenses 600C-fold, 800 multifold or 1100singlefold towels. Removablewaste receptacle is locked into cabinet. Receptacle is 8" (205mm) deep with capacity of 12-gal. (45.4-L);extends 1⁄2" (13mm) from wall. Rough Wall Opening: 16" W, 54 œ" H, 7 5⁄8" min. depth (405 x 1390 x195mm). Av. Mtg. Ht.: 67–74" (1700–1880mm) totop of unit; Barrier-Free, 60 1⁄2" (1535mm).
B-39003 TRIMLINESERIES PAPER TOWEL
DISPENSER/ WASTERECEPTACLE Satin-finishstainless steel. Door has 90°return, conceals flange. Dis-penses 600 C-fold, 800multifold or 1100 singlefoldtowels. Removable leak-proof,12-gal. (45.4-L) waste container. Rough Wall Opening:16" W, 54 œ" H, 7 7⁄8" min. depth (405 x 1390 x200mm). Av. Mtg. Ht.: 67–74" (1700–1880mm) totop of unit; Barrier-Free, 60 1⁄2" (1535mm).
B-390034 Similar to B-39003, but with stainlesssteel skirt for semi-recessing in 4" (102mm) walls.
ƒ
ƒ
ƒ
155/16"390mm
56"1420mm
355/16"895mm
173/16"435mm
9/16"14mm
75/8"195mm
541/16"1375mm
ƒƒ
ƒ B-38032 TRIMLINESERIES PAPER TOWEL
DISPENSER/WASTE RECEP-TACLE Satin-finish stainlesssteel. Door has 90° return,conceals flange. Skirt for 4"(102mm) walls. Dispenses 600C-fold, 800 multifold or 1100singlefold towels. Uncovered,removable, leak-proof, 6.3-gal.(24-L) waste container. RoughWall Opening: 11 1⁄2" W,53 µ" H, 3 œ" min. depth (290 x 1360 x 95mm).Av. Mtg. Ht.: 67–74" (1700– 1880mm) to top of unit;Barrier-Free, 60 œ" (1545mm).
B-380328 Similar to B-38032, but with covered wastereceptacle.
8 ƒ USA & Canada QuickShip model. ƒƒ USA QuickShip model.
CO
MB
INA
TIO
N T
OW
EL/W
ASTE
UN
ITS
B -36903 TRIMLINE SERIES PAPER TOWELDISPENSER/ WASTE RECEPTACLE Satin-finish
stainless steel. Door has 90° return, conceals flange.Dispenses 300 C-fold or 400 multifold towels. Removable, leak-proof, 1.6-gal. (6.1-L) waste container.Rough Wall Opening: 11 1⁄2" W, 29 1⁄2" H, 3 œ" min. depth (290 x 750 x 95mm). Av. Mtg. Ht.: 69" (1753mm)to top of unit; Barrier-Free, 51" (1295mm).
Recessed
B-39603 TRIMLINESERIES ROLL TOWEL
DISPENSER/ WASTERECEPTACLE Satin-finishstainless steel. Door has 90° return, conceals flange.Dispenses paper rolls 8" (205mm) wide, 800 ft (244 m)long in preset lengths, 2 1⁄2", 4" or 5" (65, 100 or125mm) per stroke. Removable, leak-proof, 8.6-gal.(32.6-L) waste container. Rough Wall Opening: 14 1⁄2" W,39 5⁄8" H, 9" min. depth (370 x 1005 x 230mm). Av.Mtg. Ht.: 67–74" (1700– 1880mm) to top of unit;Barrier-Free, 45 1⁄2" (1155mm).
B-396034 Similar to B-39603, but with stainless steelskirt for semi-recessing in 4" (102mm) walls.
B-3961 CLASSIC SERIES ROLL TOWEL DISPENSER/WASTE RECEPTACLE Satin-finishstainless steel. Seamless beveled flange. Acceptspaper rolls 8" (205mm) wide, 800 ft (244 m) long.Delivers preset length of towel: 2 1⁄2", 4" or 5" (65,100 or 125mm) per stroke. Removable, 12-gal.(45.4-L) receptacle locks into cabinet. Rough WallOpening: 16" W, 54 œ" H, 4" min. depth (405 x 1390x 102mm). Av. Mtg. Ht.: 67–74" (1700–1880mm) totop of unit.
B-39619 Similar to B-3961, but with stainless steelskirt for surface mounting.
B-3960 Similar to B-3961, but with flush-front. Unitrequires 9 5⁄8" (245mm) min. depth. Removable13.8-gal. (52.2-L) waste receptacle.
B-39601 CLASSIC SERIES ROLL TOWELDISPENSER/ WASTE RECEPTACLE Similar to
B-3961 but with flush front roll towel dispenser withlower mounted towel dispenser that provideswheelchair accessibilty for forward and side approach.Interior shelf for storing supplies. Removable, 15-gal.(56.8-L) receptacle locks into cabinet. Rough WallOpening: 16" W, 54 œ" H, 9 5⁄8" min. depth (405 x1390 x 245mm). Universal/Barrier-Free Mtg. Ht.: 62"(1575mm) to top of unit.
ƒ
ƒƒ
173/16"435mm
483/4"1240mm
56"1420mm
315/16"100mm
41/8"105mm
155/16"390mm
541/8"1375mm
1"25mmTyp.
23"585mm
Contura™ Series 1.8
TrimLine™ Series 1.5
Classic™ Series 1.0
Matrix™ Series 0.6
PRICE
INDEX
Note: Price index is a comparison of toilet accessories for a typical washroom of popularly specified products. Product mix may affect Price Index comparisons.
REUSABLE HEAVY-GAUGE VINYL LINERSOrder ForPart No.: Model No.:
ƒ3944-12 B-3961, B-39619368-16 B-39604369-22 B-4369, B-43699
B-4369 CONTURA SERIES PAPER TOWELDISPENSER/WASTE RECEPTACLE Satin-
finish stainless steel. Flush tumbler lock. Dispenses350 C-fold or 475 multifold towels. Waste receptaclehas 3.0-gal. (11.4-L) capacity; extends 2 1⁄2" (65mm)from wall. Removable front panel for easy cleaning.Clips secure furnished reusable vinyl liner. Rough WallOpening: 11 3⁄8" W, 26 5⁄8" H, 4" min. depth (290 x675 x 102mm). Av. Mtg. Ht.: 71" (1805mm) to top ofunit; Barrier-Free, 52 œ" (1340mm). Patented.
B-43699 Similar to B-4369, but with stainless steelskirt for surface mounting. Patented.
B-369 CLASSIC SERIES PAPER TOWELDISPENSER/WASTE RECEPTACLE Satin-finish
stainless steel. Seamless beveled flange. Dispenses350 C-fold or 475 multifold towels. Knob-latch retainsdoor. Removable waste container has 2-gal. (7.6-L)capacity. Rough Wall Opening: 12 5⁄8" W, 26 5⁄8" H, 4" min. depth (320 x 675 x 102mm). Av. Mtg. Ht.: 74"(1805mm) to top of unit; Barrier-Free, 51 1⁄2" (1310mm).
B-3699 Similar to B-369, but with stainless steel skirtfor surface mounting.
ƒ
Ï
ƒ
9
PA
PER
TOW
EL DIS
PEN
SER
S
B -4362 CONTURA SERIES PAPER TOWELDISPENSER Satin-finish stainless steel. Flush
tumbler lock. Dispenses 600 C-fold or 800 multifoldtowels. Rough Wall Opening: 11 3⁄8" W, 26 1⁄2" H, 4" min. depth (290 x 675 x 102mm). Av. Mtg. Ht.: 78" (1980mm) to top of unit; Barrier-Free, 59 1⁄2"(1510mm). Patented.
B-35903 TRIMLINE SERIES PAPER TOWELDISPENSER Satin-finish stainless steel. Door
has 90° return, conceals flange. Dispenses 300 C-fold or 400 multifold towels. Rough Wall Opening: 11 1⁄2" W,17 1⁄4" H, 3 œ" min. depth (290 x 440 x 95mm). Av. Mtg. Ht.: 67" (1700mm) to top of unit; Barrier-Free,52" (1320mm).
B-359 CLASSIC SERIES PAPER TOWELDISPENSER Satin-finish stainless steel.
Seamless beveled flange. Dispenses 350 C-fold or 475 multifold towels. Door equipped with full-lengthstainless steel piano-hinge at bottom; swings down foreasy filling. Rough Wall Opening: 11 1⁄4" W, 15 5⁄8" H, 4" min. depth (285 x 395 x 102mm). Av. Mtg. Ht.: 67"(1700mm) to top of unit; Barrier-Free, 52 1⁄2" (1335mm).
B-3861 CLASSIC SERIES ROLL TOWELDISPENSER Satin-finish stainless steel.
Seamless beveled flange. Delivers preset length ofpaper towel: 2 1⁄2", 4" or 5" (65, 100 or 125mm) perstroke. Accepts rolls 8" (205mm) wide, 800 ft (244 m)long. Rough Wall Opening: 16" W, 18 œ" H, 9 5⁄8" min.depth (405 x 475 x 245mm). Av. Mtg. Ht.: 70–78"(1780– 1980mm) to top of unit; Barrier-Free, 46 1⁄2"(1180mm).
B-38616 Similar to B-3861, but with stainless steelskirt for semi-recessing in 3 1⁄2" (90mm) walls.
ƒƒ
ƒ
415/16"125mm
153/16"385mm
14"355mm
1915/16"505mm
181/16"460mm
91/2"240mm
1"25mm
173/16"435mm
BARRIER-FREE WASHROOM GUIDELINESFULLY RECESSED WASHROOM ACCESSORIES.Recommended wherever possible. It is recom-mended that all floor-standing and surface-mounted units projecting more than 4" (100mm)from the wall be located in corners, alcoves, orbetween other protruding structural elements soas not to be a hazard to blind people or interferewith required access aisles and 60" (1525mm)minimum diameter turning spaces for wheelchairs.Surface-mounted units should not be located abovegrab bars.
10 ƒ USA & Canada QuickShip model. ƒƒ USA QuickShip model.
B-263 PAPER TOWELDISPENSER Satin-finishstainless steel. Top ofcabinet equipped withtumbler lock. Dispenses400 singlefold towels.Cabinet slots indicate refill time. Unit 12 1⁄8" W, 7 1⁄4" H,6 1⁄8" D (310 x 185 x 155mm).
Concealed Cabinets
B-318 PAPER TOWEL DISPENSER Satin-finish stainless steel. Dispenses 600 C-fold
or 800 multifold towels. Towels load into bottom ofcabinet concealed behind wall or mirror; only thetowel tray is visible. Rough Wall Opening: 12" W,18 1⁄4" H (305 x 465mm) to accept cabinet height,plus 6" (150mm) min. clearance space below toweltray; 4 1⁄2" (115mm) min. depth. Av. Mtg. Ht.:68–73" (1725–1855mm) to top of unit; Barrier-Free, 56 3⁄4" (1440mm).
B-262 CLASSIC SERIES PAPER TOWELDISPENSER Satin-finish stainless steel.
Dispenses 400 C-fold or 525 multifold towels measuring3 1⁄8" to 3 13⁄16" (79–97mm) deep without adjustment oradapters. Door has tumbler lock and piano-hinge.Cabinet slots indicate refill time. Unit 10 3⁄4" W, 14" H,4" D (275 x 355 x 100mm). Av. Mtg. Ht.: 66–70"(1675– 1780mm) to top of unit; Barrier-Free, 54"(1370mm).
B-2620 Similar to B-262, but with knob-latch.
B-2621 PAPER TOWEL DISPENSER Satin-finish stainless steel. Dispenses 200 C-fold or
275 multifold towels. Door has knob-latch. Unit10 3⁄4" W, 7 1⁄8" H, 4" D (275 x 180 x 100mm). Av. Mtg.Ht.: 58–62" (1475–1575mm) to top of unit; Barrier-Free,47" (1195mm).
B-26212 Similar to B-2621, but with tumbler lock.
B-5262 MATRIX SERIESPAPER TOWEL DISPENSERDurable ABS plastic; grey color.Dispenses 400 C-fold or 525multifold towels measuring3 1⁄8" to 3 13⁄16" (79–97mm)deep without adjustment oradapter. Cabinet slots indicaterefill time. Door has concealedlocking device. Unit 11 1⁄2" W,15 1⁄4" H, 4 3⁄4" D (290 x 385 x120mm). Patented.
5262-25 INTERNAL TOWEL TRAY ADAPTER KITOptional accessory allows Models B-262, B-2620,B-2621, B-26212, B-4262, and B-5262 to dispensenarrower paper towels 2 1⁄2" to 3 1⁄8" (64–79mm) deep.
B-72860 ROLL PAPERTOWEL DISPENSERDurable plasticconstruction; translucentcover. Lever-less pull towelmechanism dispenses12" (305mm) length ofeconomical, non-perforated, universal rollpaper towels. Accom-modates 8" (205mm)wide, up to 8" (205mm) diameter rolls, plus 3 1⁄2"(90mm) stub roll with automatic transfer. Pull force tooperate 1.8 lbs (8.0N). Locking cabinet furnished withremovable and permanent keys. Unit 12 1⁄2" W,15 1⁄2" H, 9 1⁄2" D (320 x 395 x 240mm). Patented.
B-2860 ROLL TOWEL DISPENSER Satin-finishstainless steel. Lever-less pull towel mechanismdispenses 12" (305mm) length of economical, non-perforated, universal roll paper towels. Accommodates8" (205mm) wide, up to 8" (205mm) diameter rolls,plus 3 1⁄2" (90mm) stub roll with automatic transfer.Pull force to operate 1.8 lbs (8.0N). Door has tumblerlock and piano-hinge. Cabinet slots indicate refill time.Unit 11 3⁄4" W, 15" H, 9" D (300 x 380 x 230mm).Av. Mtg. Ht.: 67–74" (1700–1880mm) to top of unit;Barrier-Free 60–66" (1525–1675mm). Patented.
B-235 PAPER CUP DISPENSERSatin-finish stainless steel.
Dispenses 150 3-oz (0.1-L) cups. Alsoadjusts to dispense up to 6-oz (0.2-L)cups. Tumbler lock on top andstainless steel piano-hinge on bottom.Cabinet swings down for easy filling.Slot on front indicates refill time. Unit3 1⁄4" W, 14 1⁄2" H, 3 1⁄4" D (85 x 370 x85mm). Universal/Barrier-Free Mtg.Ht.: 52 1⁄2"–58 1⁄2" (1335–1485mm)to top of unit.
B-253 ROLL TOWEL DISPENSER Heavy-dutyaluminum casting, satin finish. Molded plastic spindle has concealed locking device; removed withspecial key furnished. Controlled delivery. Holds paper towel rolls up to 6" (152mm) diameter. Unit12 1⁄2" wide and projects 4 7⁄8" from wall (320 x125mm).
B-4262 CONTURA SERIESPAPER TOWEL DISPENSERSatin-finish stainless steel.Top of cabinet equipped withtumbler lock. Door swingsdown for loading towels.Dispenses 400 C-fold or 525multifold towels measuring3 1⁄8" to 3 13⁄16" (79–97mm)deep without adjustment oradapter. Furnished with internal towel tray adapter kit for dispensing narrower towels 2 1⁄2" to 3 1⁄8"(64–79mm) deep. Cabinet slots indicate refill time.Recessed mounting slots prevent towels from snaggingon mounting screw heads. Unit 10 13⁄16" W, 13 1⁄4" H,4 11⁄16" D (275 x 335 x 120mm). Patented.
INSTALLED IN WALL OR BEHIND MIRROR
B-262 B-2621
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
Surface Mounted
ƒ
PA
PER
TO
WEL
DIS
PEN
SER
S
ƒƒ
ƒƒ
B-52860 MATRIXSERIES ROLLPAPER TOWELDISPENSER DurableABS plastic; grey color.Delivers preset lengthof paper towel: 2" or 4"(50 or 100mm) perstroke. 4" (100mm) stubroll. Accepts standard corerolls 7 1⁄4" to 8" (185 to 205mm) wide, up to 8"diameter (205mm). Unit 11 5⁄8" W, 15 1⁄16" H (295 x385mm), wall to lever 10 1⁄8" (255mm).
Contura™ Series 1.8
TrimLine™ Series 1.5
Classic™ Series 1.0
Matrix™ Series 0.6
PRICE
INDEX
Note: Price index is a comparison of toilet accessories for a typical washroom of popularly specified products. Product mix may affect Price Index comparisons.
NEW
NEW
11
WA
STE R
ECEP
TAC
LES
Recessed
B-43644 CONTURA SERIES WASTERECEPTACLE Satin-finish stainless steel.
Removable front panel for easy cleaning. Clips securefurnished reusable vinyl liner. Capacity: 12 œ-gal.(48.3-L). Rough Wall Opening: 15 7⁄8" W, 26 1⁄4" H,4" min. depth (405 x 665 x 102mm). Universal/Barrier-Free Mtg. Ht.: 43–47" (1090–1195mm) to top of unit.Patented.
B-3644 CLASSIC SERIES WASTERECEPTACLE Satin-finish stainless steel.
Seamless beveled flange. Removable, 12-gal. (45.4-L)receptacle locks into cabinet. Hooks hold optional vinylliner. Rough wall opening: 16" W, 29 1⁄4" H, 4" min.depth (405 x 745 x 102mm). Universal/Barrier-FreeMtg. Ht.: 42–46" (1065–1170mm) to top of unit.
B-36703 TRIMLINE SERIES WASTERECEPTACLE Satin-finish stainless steel. Door
has 90° return, conceals flange. Removable, leak-proof,12-gal. (45.4-L) waste container. Rough Wall Opening:16" W, 38 3⁄8" H, 7 œ" min. depth (405 x 975 x195mm). Universal/Barrier-Free Mtg. Ht.: 43 1⁄2"(1105mm) to top of unit.
B-367034 Similar to B-36703, but with stainless steelskirt for semi-recessing in 4" (102mm) walls.
ƒ
CountertopB-526 TRIMLINE SERIESPAPER TOWEL DISPENSER
Satin-finish stainless steel. Flangehas 90° return. Towels load intotop of dispenser. Dispenses 300C-fold or multifold towels. Unit12 œ" W, 6" front to back depth(325 x 150mm); 17" (430mm)min. clearance below mounting surface is required.Rough Countertop Cutout: 12 1⁄4" W (310mm), 4 1⁄2"front to back depth (115mm), œ" to 1 1⁄2" (19 to 38mm)mounting thickness. Housing below countertop toconceal dispenser is not included. Barrier-free countertopmust not exceed 34" (865mm) height, and have aclearance of at least 29" (735mm) from the bottom ofthe apron to the finish floor.
ƒ
LARGE-CAPACITY RECESSED WASTE RECEPTACLES
Minimum Depth
Model No.
Capacity
Depth
Extension
Rough Wall
From Wall
Opening
B-43644
12 3/4-gal. (48.3-L)
9" (230mm)
5" (125mm)
4" (102mm)
ƒB-3644
12-gal. (45.4-L)
8" (205mm)
4" (102mm)
4" (102mm)
Reusable Heavy-Gauge Vinyl Liner: Order Part No. ƒ3944-12 for above models.
12 ƒ USA & Canada QuickShip model. ƒƒ USA QuickShip model.
Surface Mounted
B-278 SMALL-CAPACITY WALL URN Satin-finish stainless steel. For installation between
urinals, alongside countertops in washrooms, or inother areas where space is limited. Unit 7 1⁄2" W,2 œ" H, 3 7⁄8" D (190 x 70 x 100mm). Wall plate is3 œ" (95mm) high. Universal/Barrier-Free Mtg. Ht.:39–49" (990–1245mm) to top of unit.
B-240 STAINLESS STEEL ASHTRAY Satin-finish stainless steel. For installation in
washrooms above countertops, in toilet compart-ments, and alongside urinals. Can also be mountedin hallway and lobby areas where space is limited.Ashtray flips over for emptying without removal fromframe. Unit 5" W, 1 1⁄2" H, 3 7⁄8" D (125 x 40 x100mm). Universal/Barrier-Free Mtg. Ht.: 38–48"(965–1220mm) to top of unit.
BARRIER-FREE DESIGN GUIDELINES ASHTRAYS AND WALL URNS. It is recommended that all floor-standing and surface-mounted unitsprojecting more than 4" (100mm) from the wall belocated in corners, alcoves, or between otherprotruding structural elements so as not to be ahazard to blind people or interfere with requiredaccess aisles and 60" (1525mm) min. diameterturning space for wheelchairs. Surface-mountedunits should not be located above grab bars.Ashtrays and waste receptacle openings should belocated 15" to 48" (380–1220mm) above thefinish floor to allow forward reach by people inwheelchairs.
BARRIER-FREE WASHROOM GUIDELINESWASTE RECEPTACLES. Access to receptacleopenings should be 15" to 48" (380–1220mm)above the finish floor to allow forward and sidereach by people in wheelchairs. Hinged panelscovering waste receptacle openings should notrequire more than 5 pounds of force (22.2 N) toopen. It is recommended that units projecting more than 4" (100mm) from the wall be located in corners, alcoves, or between other protrudingstructural elements so as not to be a hazard toblind people or interfere with required accessaisles and 60" (1525mm) minimum diameterturning spaces for wheelchairs.
WA
STE
REC
EPTA
CLE
S/A
SH
TRA
YS
AN
DW
ALL
UR
NS
Surface Mounted CountertopFloor StandingB-277 CONTURA SERIESWASTE RECEPTACLE Satin-finish stainless steel. Capacity:12 œ-gal. (48.3-L). Top edgesare hemmed and bottom ofwaste receptacle has recessedfinger grip for safe handling. Clips secure furnished reusablevinyl liner. Unit 15 1⁄8" W, 23" H,8 1⁄2" D (385 x 585 x 215mm).Patented.
B-279 CLASSIC SERIESWASTE RECEPTACLE Satin-finish stainless steel. Bottomedges hemmed for maximumsafety. Hooks hold furnishedreusable vinyl liner; removable for servicing. Capacity: 6.4-gal.(24.2-L). Unit 14" W, 18" H,6" D (355 x 455 x 150mm).
B-275 WASTE RECEPTACLESatin-finish stainless steel.Bottom edges hemmed formaximum safety. Hooks holdfurnished reusable vinyl liner;removable for servicing.Capacity: 20-gal. (75.7-L). Unit 16 1⁄2" W, 23" H,12 1⁄2" D (420 x 585 x320mm).
B-261 FACIAL TISSUEWASTE RECEPTACLE Satin-finish stainless steel. Bottomedges hemmed for maximumsafety. Capacity: 1 1⁄2-gal.(5.7-L). 10 1⁄2" (265mm) W attop, 8 5⁄8" (220mm) W atbottom. Unit 9" H, 4 3⁄8" D(230 x 110mm).
B-529 CIRCULAR WASTE CHUTE Rolledflange and exposed surfaces bright-polished
stainless steel. Outside diameter 6 15⁄16" (175mm),inside diameter 5 1⁄2" (140mm), chute depth 5"(130mm). Rough Countertop Cutout: 5 5⁄8" diameter(140mm). Provides waste deposit access toreceptacle (not furnished) placed under countertop.Universal/Barrier-Free: countertop must not exceed34" (865mm) height and have a clearance of atleast 29" (735mm) from the bottom of the apron tothe finish floor.
B-2250 SWING-TOP WASTE RECEPTACLE Satin-finish stainless steel. Top with self-closing doors.Vinyl wall bumper, rubber feet. Hooks for liners.Capacity: 13-gal. (49.2-L). Unit 12 1⁄2" x 12 1⁄2"(320 x 320mm) at top, 29 1⁄2" (750mm) high.
B-2270 Similar to B-2250, but with 21-gal. (79.5-L) capacity. Unit 14" x 14" (355 x 355mm) at top,37 1⁄2" (955mm) high.
B-2260 OPEN-TOP WASTE RECEPTACLE Satin-finish stainless steel. Vinyl wall bumper, rubber feet.Hooks for liners. Capacity: 13-gal. (49.2-L). Unit12 1⁄2" x 12 1⁄2" (320 x 320mm) at top, 22" (560mm)high.
B-2280 Similar to B-2260, but with 21-gal. (79.5-L)capacity. Unit 14" x 14" (355 x 355mm) at top, 30"(760mm) high.
B-2400 LARGE-CAPACITYWASTE RECEPTACLE Satinfinish stainless steel. Removablefunnel top with 8 1⁄4" (210mm)dia. opening for hygienic, no-touch disposal of waste. Fourheavy-duty rubber feet.Galvanized-steel waste containerhas handle for easy removal.Capacity: 33-gal. (125-L). Unit18 1⁄4" dia., 32" high (465 x815mm).
B-5277 MATRIX SERIESWASTE RECEPTACLEImpact-resistant polymer;grey color. Capacity: 13-gal.(49.2-L). Clips secureoptional vinyl liner. Unit17" W, 23" H, 9 1⁄2" D(430 x 585 x 240mm).Patented.
B-2250 B-2280
ƒ
ƒ
ƒƒ
ƒƒ
ƒ
ƒ
ƒƒ
B-2300 OPEN-TOP WASTERECEPTACLE Satin-finishstainless steel with black steeldome-top. 6" (150mm) dia.opening for hygienic, no-touchdisposal of waste. Removable,galvanized steel waste container.Capacity: 15-gal. (56.8-L). Unit15" dia., 34" H (380 x 865mm).
ƒ
REUSABLE HEAVY-GAUGE VINYL LINERSOrder ForPart No.: Model No.:
2250-3 B-2250, B-22602270-3 B-2270, B-2280275-14 B-275279-14 B-279
ƒ3944-12 B-2775277-12 B-5277
13
B-43500 CONTURA SERIES SANITARYNAPKIN/ TAMPON VENDOR Satin-finish
stainless steel. Dispenses 31 napkins and 22tampons. Single-coin mechanisms convertible forƒ25¢-operation, or specify Free-operation (no coin)mechanisms. Two flush tumbler locks. Separate lockand key for coin box. Rough Wall Opening: 15 œ" W,26 1⁄4" H, 4" min. depth (400 x 665 x 102mm). Av.Mtg. Ht.: 69–73" (1755–1855mm) to top of unit;Barrier-Free, 52" (1320mm). Patented.
B-435009 Similar to B-43500, but with stainlesssteel skirt for surface mounting. Single coinmechanism for 25¢-operation. Patented.
B-43500X2 Similar to B-43500, but with double coinmechanism convertible for 50¢-operation. Patented.
B-2800 TRIMLINE SERIESSANITARY NAPKIN/TAMPONVENDOR Satin-finish stainlesssteel. Similar to B-3500, butwith cabinet for surface-mounted installation. Single-coin mechanisms convertiblefor ƒ25¢-operation, or specifyFree-operation (no-coin) mech-anisms. Unit 14 7⁄8" W,25 3⁄8" H, 4 œ" D (380 x 645x 120mm). Patented.
B-2800X2 Similar to B-2800, but with double-coinmechanisms convertible for 50¢-operation. Patented.
B-352 25 CLASSIC SERIES SANITARYNAPKIN/TAMPON VENDOR For budget installations.Satin-finish stainless steel. Seamless beveled flange.Dispenses 30 napkins and 27 tampons. Single-coinmechanisms for 25¢-operation. Adjustable flangeallows semi- or fully-recessed installation. Plastic twisthandles. Rough Wall Opening: 12 1⁄2" W, 26 3⁄8" H,4–6 1⁄2" min. depth (320 x 670 x 102–165mm).Av. Mtg. Ht.: 75–79" (1905–2005mm) to top of unit;Barrier-Free, 61 1⁄2" (1560mm).
B-282 25 Similar to B-352 25, but with cabinet forsurface-mounted installation. Unit 11 7⁄8" W, 25 7⁄8" H,6 1⁄2" D (300 x 655 x 165mm).
B-3500 TRIMLINE SERIES SANITARYNAPKIN/ TAMPON VENDOR Satin-finish
stainless steel. Door has 90° return, conceals flange.Dispenses 31 napkins and 22 tampons. Single-coinmechanisms convertible for ƒ25¢-operation, or specifyFree-operation (no-coin) mechanisms. Two tumblerlocks. Separate lock and key for coin box. Rough WallOpening: 15 1⁄8" W, 25 1⁄2" H, 4" min. depth (385 x 650x 102mm). Av. Mtg. Ht.: 71–75" (1805– 1905mm) totop of unit; Barrier-Free, 51" (1295mm). Patented.
B-3500X2 Similar to B-3500, but with double-coinmechanisms convertible for 50¢-operation. Patented.
DESIGNER’S NOTESHow to specify sanitary napkin/tampon vendors with desired coin denomination:1. Select model number of vendor required.2. Add coin denomination required (25¢ for models
with single-coin mechanisms, 50¢ for modelswith double-coin mechanisms, and Free forno-coin mechanisms). See product descriptionsfor coin denominations available.
Example: To order recessed sanitary napkin/tampon vendors with double-coin mechanisms and50¢-operation, specify B-3500X2 50.
B-2800, B-3500, and B-43500 Series sanitarynapkin/tampon vendors are convertible in the fieldto any Bobrick standard coinage (single, double orcomplimentary) with the purchase of a Coin PlateReplacement Kit. Contact your Bobrick Represent-ative for full details.
Coin-mechanism pull knobs meet Barrier-Freestandards: operable with one hand and less than5 pounds of force (22.2 N), with no twisting motionrequired.
All TrimLine Series vendor doors have 90˚ returnsfor maximum rigidity.
All vendor doors are 18-gauge (1.2mm), securedwith concealed full-length stainless steel hinge andreplaceable in the field.
BARRIER-FREE WASHROOM GUIDELINESVENDORS. Buttons and knobs should be operablewith one hand and without tight grasping, pinching,or twisting of the wrist. Operation of pull knobsshould not require more than 5 pounds of force(22.2 N).
Recessed
ƒ
ƒ
ƒ
4–63/8"100–160mm
1115/16"305mm
137/8"350mm
1"25mmTyp.
257/8"655mm 277/8"
710mm
71/2"190mm
ƒ
ƒ
Surface Mounted
NA
PK
IN/TA
MP
ON
VEN
DO
RS
14 ƒ USA & Canada QuickShip model. ƒƒ USA QuickShip model.
Sur
eFlo
™SO
AP
DIS
PEN
SIN
G S
YSTE
M
SureFlo™ SOAP DISPENSING SYSTEMCOMPONENTS AND SOAP CARTRIDGESConnects up to five existing or new Bobrick B-822Series Lavatory-Mounted Soap Dispensers to a singlesupply of soap.
SureFlo™ SOAP SYSTEM CABINETAccommodates one 12-liter (13,000 handwashes)SureFlo™ Soap Cartridge. Cabinet is equipped with aconcealed 2-liter (2,000 handwashes) soap reservoir.Cabinet is constructed of type 304 stainless steel.Door has satin finish and is secured to cabinet withpiano hinge at bottom and tumbler lock, keyed likeother Bobrick washroom accessories, at the top.Cabinet is equipped with Low Soap Indicator (LSI)Light. Cabinet is mounted under lavatory countertopon left or right side walls, or rear wall. Includes tubingand connectors. Cabinet furnished with one 12-litercartridge of Bobrick SureFlo™ Soap. Cabinet 10" W,15 1⁄4" H in front, 16 1⁄2" H in rear, 18 5⁄8" D (255 x385–420 x 475mm). Patented.
B-830.12 Soap System Cabinet with one 12-litercartridge of Pink Lotion SureFlo™ Soap.B-830.13 Soap System Cabinet with one 12-litercartridge of Premium Gold SureFlo™ Soap.
830-141 SureFlo™ CONNECTOR KIT FOR EXISTINGOR NEW B-822 SERIES SOAP DISPENSERINSTALLATIONS Includes vandal-resistant, 360° freeturning, Swivel Assembly, Shank Extension, tubingand connectors for converting existing B-822 SeriesInstallations (or installing new B-822 Series SoapDispensers) into a B-830 SureFlo™ Soap DispensingSystem. One kit required for each existing or newB-822 Series Soap Dispenser.
SOAP PUMP (B-822 SERIES), MOUNTING SHANKKITS FOR NEW SOAP DISPENSER INSTALLATIONSOne kit required for each new lavatory-mounted soapdispenser. Also requires one 830-141 Connector Kitfor each soap dispenser.
SureFlo™ Soap Dispensing System for Heavy Traffic Washrooms
PART NO. SOAP PUMP DESCRIPTIONƒ830-159 4" (100mm) Spout Length, Bright
Polished Stainless Steel (B-822)830-172 6" (150mm) Spout Length, Bright
Polished Stainless Steel (B-8226)Note: Maximum Countertop Mounting Thickness4 1⁄4" (110mm)
HOW TO SPECIFY/ORDER:
EXISTING B-822 SERIES DISPENSERS INSTALLED:B-830.12, or B-830.13 Soap System Cabinet.One cabinet required for up to 5 lavatory-mountedsoap dispensers. Wider countertops with more soapdispensers require additional cabinets. 830-141 Connector Kit. One kit required for eachB-822 Series Soap Dispenser.
NEW INSTALLATIONS:B-830.12, or B-830.13 Soap System Cabinet.One cabinet required for up to 5 lavatory-mountedsoap dispensers. Wider countertops with more soapdispensers require additional cabinets.
830-159 or 830-172 Soap Pump, Mounting ShankKit. One kit required for each B-822 Series SoapDispenser. 830-141 Connector Kit. One kit required for eachsoap dispenser.
SureFlo™ SOAP SYSTEM SOAP CARTRIDGESFormulated especially for Bobrick B-822 SeriesLavatory-Mounted Soap Dispensers.
B-81312 Premium Gold Soap, 12 liter (13,000handwashes)B-81212 Pink Lotion Soap, 12 liter (13,000handwashes)
SureFlo™ Soap Dispensing Systems can beconverted back to individual B-822 Series SoapDispensers. Order one 830-145 Re-conversion Kitfor each soap dispenser.
ƒ
ƒ
ƒ
ƒƒ
ƒ
Bobrick exclusive: SureFlo™ Soap System
Bobrick SureFlo™ Soap System reduces costs,assures steady supply of soap.
WARRANTYOnly Bobrick SureFlo™ Soaps should be used inB-822 Series Lavatory-Mounted Soap Dispensers.Use of any other soap will void the warrantyprovided for the B-822 Series Soap Dispensersused in the SureFlo™ Soap System. See page 4for warranties and limitations on Bobrick’s SureFlo™
Soap System.
15
B-822 Series Lavatory-Mounted Soap Dispensers
B-8221
B-822
TOP-FILLING SOAP DISPENSERS• For ease of maintenance and labor savings.• Vandal-resistant locking cover and free-turning spout.• Corrosion-resistant. • Bright polished spout, cover and escutcheon.• High-impact-resistant ABS body and shank.• Shatter-resistant polyethylene container.• Patented design.
B-8225
FOR DISPENSING LIQUID & LOTION SOAPS, AND SYNTHETIC DETERGENTS
Model NumberStainless Brass Capacity Spout Length Maximum MountingSteel Finish Thickness
ƒ B-822 B-8225 34-fl oz (1.0-L) 4" (100mm) 4" (100mm)ƒ B-8221 N/A 20-fl oz (0.6-L) 4" (100mm) 1" (25mm)ƒ B-8226 B-82265 34-fl oz (1.0-L) 6" (150mm) 4" (100mm)ƒ B-82216 N/A 20-fl oz (0.6-L) 6" (150mm) 1" (25mm)
LAVA
TOR
Y-M
OU
NTED
SO
AP
DIS
PEN
SER
S
DESIGNER’S NOTE1. Mount through 1" (25mm) diameter hole in
lavatory or countertop.2. Diameter of escutcheon: 2 1⁄16" (50mm).3. Maximum height from base of body to bottom of
container: 14 5⁄8" (370mm) for B-822, B-8225,
IMPORTANT NOTEAll Bobrick B-822 Series Soap Dispensers aredesigned to dispense commercially marketed all-purpose hand soaps including liquid and lotionsoaps, synthetic detergents, and antibacterialsoaps containing PCMX and/or Triclosan. Bobricksoap dispensers are not designed to dispensealcohol-based hand sanitizers or iodine-basedsurgical soaps.
B-8226, B-82265; 8 1⁄4" (210mm) for B-8221,B-82216. Allow clearance below basin for 3 1⁄2"(90mm) diameter container.
4. Mount so end of spout extends over inner edge of bowl.
Automatic touch-free sensor eIiminates cross con-tamination. Meets Barrier-Free accessibilitystandards. Sensor detects user’s hand to auto-matically dispense controlled amount (O.8ml)of soap; activation range is 4" (1OOmm) fromsensor lens. Reduces soap usage, waste. BrightPolished chrome spout cover. Dispenses 1000handwashes per 800ml, 2000 handwashes per
1600ml OneShot® soap refills. Soap refills availablefrom sanitary supply distributors. Red LED lightblinks when soap refill is low. Yellow LED light blinkswhen battery life is low (average battery life 100 soaprefills or 2 years). Water-resistant battery compart-ment and motor housing. Mounts through 1" (25mm)
diameter hole in lavatory or countertop. Maximumcountertop mounting thickness 2" (50mm). Spacerfor use with lavatory rim 3⁄4" (19mm) or greater isincluded. Battery requirements: 4 Alkaline D Cells(not included).
DESIGNER’S NOTES1. Maximum height from base of soap dispenser
body to bottom of soap refill 14 7⁄8" (380mm) for800ml refill; 16 5⁄8" (420mm) for 1600ml refill.
2. Allow 5" (125mm) diameter clearance belowlavatory or countertop for motor housing and800ml soap refill. For 160Oml refill allow 5 1⁄2"(140mm) diameter clearance.
3. Battery compartment equipped with 36" (915mm)cord, mounts on wall under lavatory orcountertop.
Available on special order:All metal soap dispenser for vandal-proneinstallations.AC Adapter (6V) for up to four B-826 AutomaticLavatory-Mounted Soap Dispensers.
B-826.18 STARTER KITIncludes B-826Automatic Lavatory-Mounted SoapDispenser, an 800mllotion soap refill, and 4Alkaline D Cell batteries.
826-20 AC ADAPTER(6V) for one B-826Autornatic Lavatory-Mounted SoapDispenser.
OneShot is a registered trademark of Technical Concepts LLC.
B-826 Automatic Lavatory-Mounted Soap DispenserNEW
B-2014 SOAPERSHELF® COMBINATIONUNIT Soap vessel and shelf are satin-finish
stainless steel. Capacity: 80-fl oz (2.4-L). Corrosion-resistant valve dispenses commercially marketedall-purpose hand soaps. Soap refill window. Unit17 1⁄2" W, 3 1⁄8" H, 5" D (445 x 80 x 125mm); wallto pushbutton, 5 1⁄4" (135mm). Universal/Barrier-FreeMtg. Ht.: 46 1⁄2" (1180mm) to top of unit withpushbutton 44" (1120mm) above floor. Patented.
B-4112 CONTURA SERIES SOAPDISPENSER Corrosion-resistant valve
dispenses commercially marketed all-purpose handsoaps. Container is satin-finish stainless steel.Capacity: 40-fl oz (1.2-L). Soap refill window.Concealed wall fastening. Hinged filler-top requiresspecial key to open. Vandal-resistant. Unit 7" W,6 1⁄8" H (180 x 155mm); wall to pushbutton, 3 5⁄16"(85mm). Universal/Barrier-Free Mtg. Ht.: 49"(1245mm) to top of unit with pushbutton 44"(1120mm) above floor. Patented.
B-306 TRIMLINE SERIES SOAP DISPENSER Satin-finish stainless steel. Door has 90° return,
conceals flange. Enclosed plastic soap vessel on backof door swings open for easy filling. Full-length hingeand tumbler lock secure door to cabinet. Capacity:45-fl oz (1.3-L). Corrosion-resistant valve dispensescommercially marketed all-purpose hand soaps. Soaprefill window. Rough Wall Opening: 8 3⁄8" W, 4 3⁄8" H,3 7⁄8" min. depth (215 x 110 x 100mm). Universal/Barrier-Free Mtg. Ht.: 47 3⁄4" (1215mm) to top of unitwith pushbutton 44" (1120mm) above floor.
Soap vessel swingsout for filling.
Surface Mounted
ƒ
ƒ
ƒ
ƒ
B-4063
DESIGNER’S NOTESAll surface-mounted soap dispensers require 4"(100mm) minimum clearance above unit for filling;B-2014 SoaperShelf® requires 5 1⁄4" (135mm).All Bobrick soap valves meet Barrier-Free standards:operable with one hand, without tight grasping,pinching, or twisting of the wrist, and with less than5 pounds of force (22.2 N) when soap container iscompletely filled.
BARRIER-FREE WASHROOM GUIDELINESSOAP DISPENSERS. Push buttons and pistonsshould be operable with one hand and without tight grasping, pinching, or twisting of the wrist.Activation of soap valves should not require morethan 5 pounds of force (22.2 N) when unit iscompletely filled. If wall-mounted units are placedover lavatories or countertops, then their push-buttons should be located no more than 44"(1120mm) above the finish floor. Depending onthe depth of the obstruction, the pushbuttons canbe mounted as high as 48" (1220mm) for forwardapproach and 54" (1370mm) for side approach.
SO
AP
DIS
PEN
SER
S
B -4112
ƒ
B-2112B-2111
ƒ 4112-79 RETROFIT ALL-PURPOSE VALVEAvailable for Models B-4063, B-4112, B-2111,B-2112 and B-2014. Field-replaceable corrosion-resistant valve dispenses commercially marketedall-purpose hand soaps. Valve operates with lessthan 5 lb of force (22.2 N). Patented.
71/4"185mm
63/8"160mm
53/4"145mm
53/8"135mm
37/8"100mm
Recessed
Contura™ Series 1.8
TrimLine™ Series 1.5
Classic™ Series 1.0
Matrix™ Series 0.6
PRICE
INDEX
Note: Price index is a comparison of toilet accessories for a typical washroom of popularly specified products. Product mix may affect Price Index comparisons.
2111-79 SureFlo™ RETROFIT VALVE For Models B-11, B-12, B-111, B-112, B-201, B-2014, B-2111, B-202, B-2024, B-306, B-3067; B-310, B-320 and B-330 Series Combination Units. Valve operates with less than 5 lb of force (22.2 N). Patented.
B-2112 CLASSIC SERIES SOAP DISPENSERHorizontal tank is satin-finish stainless steel.
Corrosion-resistant valve dispenses commerciallymarketed all-purpose hand soaps. Capacity: 40-fl oz(1.2-L). Soap refill window. Concealed wall fastening.Hinged filler-top requires special key to open. Vandal-resistant. Unit 8 1⁄8" W, 4 3⁄4" H (206 x 121mm); wallto pushbutton, 3 1⁄2" (90mm). Universal/Barrier-FreeMtg. Ht.: 47 1⁄2" (1205mm) to top of unit withpushbutton 44" (1120mm) above floor. Patented.
B-2111 Similar to B-2112, but with vertical tank.Universal/Barrier-Free Mtg. Ht.: 50 7⁄8" (1290mm) totop of unit with pushbutton 44" (1120mm) above floor.
B-4063 CONTURA SERIES SOAPDISPENSER Corrosion-resistant valve dis-
penses commercially marketed all-purpose handsoaps. Front of dispenser drawn, 20-gauge(1.0mm), one-piece, satin-finish stainless steelwith covered, plastic soap vessel attached to back.Capacity: 50-fl oz (1.5-L). Pulls out for filling andmaintenance. Concealed locking device. Vandal-resistant. Soap refill window. Wall to pushbutton,1 5⁄8" (40mm). Rough Wall Opening: 5 7⁄8" W,5 1⁄2" H, 4" min. depth (150 x 140 x 102mm).Universal/Barrier-Free Mtg. Ht.: 49" (1245mm) totop of unit with pushbutton 44" (1120mm) abovefloor. Patented.
16 ƒ USA & Canada QuickShip model. ƒƒ USA QuickShip model.
17
B-40 CLASSIC SERIES SOAP DISPENSER Two-tone styling in black and grey. Corrosion-
resistant valve dispenses commercially marketed all-purpose hand soaps. Vandal-resistant lid has uniquekeyless locking device. Lid pivots up after lock isdisengaged for easy top filling. Large-capacity, trans-lucent container provides visible soap level. Capacity:40-fl oz (1.2-L). Concealed wall fastening. Unit isremovable from wall for cleaning. Unit 5 13⁄16" W, 6 7⁄8" H (150 x 175mm); wall to pushbutton, 3 3⁄16"(80mm). Universal/Barrier-Free Mtg. Ht.: 50" (1270mm) to top of unit with pushbutton 44" (1120mm) above floor. Patented.
B-42 Same as B-40, but with all-black styling. Universal/Barrier-Free Mtg. Ht.: 50" (1270mm) to top of unit withpushbutton 44" (1120mm) above floor.
B-60 SOAP DISPENSERIdeal for high-volume
applications, such as healthand sports club showers.Corrosion-resistant valvedispenses commerciallymarketed all-purpose handsoaps. Translucent high-impactplastic container providesvisible soap level and hasoversized opening for quick topfilling. Extra-large capacity: 1.5-gal. (5.7-L). Unit7 3⁄4" W, 13" H (195 x 330mm); wall to pushbutton,5 3⁄4" (145mm). Universal/Barrier-Free Mtg. Ht.:54 3⁄4" (1390mm) to top of unit with pushbutton 44"(1120mm) above floor.
IMPORTANT NOTEAll Bobrick liquid soap dispensers are designed todispense commercially marketed all-purpose handsoaps including liquid and lotion soaps, syntheticdetergents, and antibacterial soaps containingPCMX and/or Triclosan. Bobrick soap dispensersare not designed to dispense alcohol-based handsanitizers or iodine-based surgical soaps.
CLASSIC SERIES LIQUIDMATE® SOAPDISPENSERS Corrosion-resistant valve
dispenses thin, free-flowing commercially marketed all-purpose hand soaps. Translucent polyethylene containerprovides visible soap level. 24-fl oz (0.7-L) capacity.Unit 4" W, 7 5⁄8" H (100 x 195mm). Universal/Barrier-Free Mtg. Ht.: 50 1⁄2" (1285mm) to top of unit with push-button 44" (1120mm) above floor.B-155 Bright polished, chrome-plated ABS mountingbracket.B-156 Beige ABS mounting bracket.
B-170 CLASSIC SERIESPOWDERMATE® SOAP
DISPENSER Valve dispenses free-flowing powdered soap from coarsegranules to fine powders. Exclusivemoisture-seal valve prevents soapsfrom clogging. Polyethylenecontainer with visible soap level.Capacity: 34-fl oz (1.0-L). Brightpolished, chrome-plated ABSmounting bracket. Unit 4" W,10 5⁄8" H (100 x 270mm).Universal/Barrier-Free Mtg. Ht.:52 7⁄8" (1345mm) to top of unit with pushbutton 44"(1120mm) above floor.
B-132 CLASSIC SERIESSOAP DISPENSER Container
is satin-finish stainless steel.Capacity: 32-oz (0.9-L). Dispensingmechanism with stainless steellever dispenses any free-flowingpowdered soap. Agitator springprevents soap build-up. Top openswith special key provided. Con-cealed wall fastening. Unit4 13⁄16" W, 8 1⁄8" H (120 x 205mm); wall to lever,3 7⁄8" (100mm). Universal/Barrier-Free Mtg. Ht.:50 5⁄8" (1285mm) to top of unit with lever 44"(1120mm) above floor.
ƒ
ƒ
ƒ
B-155 B-156
ƒ
ƒƒ
B-5050B-2112 B-40
B-40 B-42 SO
AP
DIS
PEN
SER
S
B -5050 MATRIX SERIES SOAP
DISPENSER Impact-resistant polymer; grey color. Corrosion-resistant valve dispenses com-mercially marketed all-purpose hand soaps. Valve removable for easy maintenance. Lid has con-cealed locking device. Concealedwall/mirror mounting. Large-capacity container: 50-fl oz (1.5-L). Unit 6" W, 8 1⁄8" H (150 x205mm); wall to pushbutton, 4" (100mm). Universal/Barrier-Free Mtg. Ht.: 51" (1295mm) to top of unit withpushbutton 44" (1120mm) above floor. Patented.
18 ƒ USA & Canada QuickShip model. ƒƒ USA QuickShip model.
DESIGNER’S NOTESTo specify mirrors, use Series Number desiredfollowed by width and height in inches. Widthdimension must always be stated first followingSeries Number.
B-165, B-166, B-280, B-290, B-292, B-293, andB-294 Series mirrors must be installed with widthand height dimensions as ordered. Mirror backand wall hanger cannot be installed side ways toreverse width and height dimensions.
MIR
RO
RS
STANDARD STOCK SIZES B-290 SERIES MIRROR
Model No. Width Height
B-290 1824 18" 24" (46 x 61cm)ƒB-290 1830 18" 30" (46 x 76cm)ƒƒB-290 1836 18" 36" (46 x 91cm)
B-290 2430 24" 30" (61 x 76cm)ƒB-290 2436 24" 36" (61 x 91cm)
B-290 2448 24" 48" (61 x 122cm)B-290 2460 24" 60" (61 x 152cm)B-290 2472 24" 72" (61 x 183cm)B-290 3636 36" 36" (91 x 91cm)B-290 4836 48" 36" (122 x 91cm)B-290 7236 72" 36" (183 x 91cm)
B-290 SERIES FRAMED MIRRORS One-piece rollformed frame is œ" x œ" (19 x 19mm), type 304stainless steel angle with satin finish. Type 304stainless steel provides superior corrosion resistance,compared to 400 Series stainless steel, againstenvironmental moisture, hose-down maintenance andstrong cleaning solutions. Corners are heliarc welded,ground and polished smooth. Beveled edges of framehug mirror; provides gapless fit for improved appear-ance, and safety when cleaning mirror. No. 1 quality,1⁄4" (6mm) glass mirror electrolytically copper-plated;warranted against silver spoilage for 15 years. Mirroredges protected with plastic filler strips to preventchipping; back is protected by 3⁄16" (5mm) thick, water-resistant, polyethylene padding. Galvanized steel backattached to frame with concealed screws. Mirrorsecured to concealed wall hanger with theft-resistantlocking device.
SPECIAL-ORDER CUSTOM SIZE B-290 AND B-292SERIES MIRRORS Maximum size of one-piece mirror:144" x 72" (366 x 183cm). Maximum frame sizeavailable: 186" x 72" (472 x 183cm) with two piecesof glass in one-piece frame furnished with I-sectionmolding with polished stainless steel exposed finishcovering seam where two pieces of glass butttogether. Shelves longer than 120" (305cm) will befurnished as two pieces butted together. Custom sizemirrors lock to wall hanger with two concealed theft-resistant screws in bottom of frame. To specifyspecial sizes, use Series Number followed by widthand height in inches. For example: B-290 70 x 30(178 x 76cm) or B-292 132 x 48 (335 x 122cm).
B-290 SERIES
Angle Frame
BARRIER-FREE WASHROOM GUIDELINESMIRRORS. Bottom edge of reflective surface should be mounted no higher than 40" (1015mm) above thefinish floor. A single full-length mirror is recommended in each washroom because it is universally usable.
IMPORTANT NOTEAll Bobrick framed mirrors are manufactured to overall dimensions, as shown in all mirror tables on pages 18 and19. Overall height of mirror/shelf models includes shelf.
WARRANTYFor product warranties and limitations information, see page 4.
B-292 SERIES MIRROR/SHELF COMBINATIONB-290 Series stainless steel angle-frame mirrorfurnished with one-piece, type 304 satin-finishstainless steel shelf. Shelf projects 5" (127mm)and has œ" (19mm) return edges on front andsides. Front return edge of shelf hemmed formaximum rigidity and safety. Shelf corners areheliarc welded, ground and polished smooth.Concealed 16-gauge (1.6mm) stainless steelbrackets attach shelf to mirror frame.STANDARD STOCK SIZES B-292 SERIES MIRROR/SHELF
Model No. Width Height
B-292 1824 18" 24" (46 x 61cm)B-292 1830 18" 30" (46 x 76cm)B-292 1836 18" 36" (46 x 91cm)B-292 2436 24" 36" (61 x 91cm)
PRICEINDEX
B-290 SeriesB-280 SeriesB-165 Series
2.11.41.0
B-292 SeriesB-166 Series
1.81.0
B-290, B-292, B-280, B-165 AND B-166 SERIESMIRRORS.CONCEALED WALL HANGER FOR THEFT-RESISTANT MOUNTING Simplifies installation. Mirror is held flush to wall by integral brackets at top and bottom of mirror back. Back is constructedof galvanized steel. Concealed theft-resistantlocking device secures mirror to wall hanger.Locking device may be unlocked and mirror removedfrom wall for reglazing. Note: Provide minimum 3⁄4"(19mm) clearance at top of mirror for mounting onwall hanger and 1" (25mm) clearance on each side.
SPECIAL-ORDER REFLECTIVE SURFACES
Polished Stainless Steel, Tempered and Laminated Glass Mirrors resist breakage and provide a measure of safety from broken glass, but differ in color and reflective quality from standard glass mirrors. Available onspecial order.
Polished Stainless SteelB-1656 Series Mirrors (up to 72" x 24"; 183 x 61cm)B-2906 Series Mirrors (up to 72" x 24"; 183 x 61cm)Tempered GlassB-1658 Series Mirrors (up to 72" x 48"; 183 x 122cm)B-2908 Series Mirrors (up to 120" x 48"; 305 x 122cm)
Laminated GlassB-1659 Series Mirrors (up to 72" x 48"; 183 x 122cm)B-2909 Series Mirrors (up to 96" x 48"; 245 x 122cm)
B-280 SERIES FRAMED MIRRORS New one-pieceroll formed frame is œ" x œ" (19 x 19mm), type304 stainless steel angle with satin finish. Type304 stainless steel provides superior corrosionresistance, compared to 400 Series stainless steel,against environmental moisture, hose-downmaintenance and strong cleaning solutions. Cornersare heliarc welded with exposed weld bead. Bevelededges of frame hug mirror; provides gapless fit forimproved appearance, and safety when cleaningmirror. No. 1 quality, 1⁄4" (6mm) glass mirrorelectrolytically copper-plated; warranted againstsilver spoilage for 10 years. Mirror edges protectedwith plastic filler strips to prevent chipping; back isprotected by 3⁄16" (5mm) thick, water-resistant,polyethylene padding. Galvanized steel backattached to frame with concealed screws. Mirrorsecured to concealed wall hanger with theft-resistant locking device.STANDARD STOCK SIZES B-280 SERIES MIRROR, STANDARD GLASS
Model No. Width Height
B-280 1824 18" 24" (46 x 61cm)ƒB-280 1830 18" 30" (46 x 76cm)ƒƒB-280 1836 18" 36" (46 x 91cm)ƒB-280 2436 24" 36" (61 x 91cm)
B-2808 SERIES FRAMED MIRRORS Similar toB-280 Series, but with tempered glass mirror.STANDARD STOCK SIZES B-2808 SERIES MIRROR, TEMPERED GLASS
Model No. Width Height
B-2808 1824 18" 24" (46 x 61cm)B-2808 1830 18" 30" (46 x 76cm)B-2808 1836 18" 36" (46 x 91cm)B-2808 2436 24" 36" (61 x 91cm)
19
MIR
RO
RS
Frameless,stainless steel
B-1556 SERIES FRAMELESS MIRRORS Brightpolished stainless steel. Mirror has 1⁄4" (6mm)return concealing 1⁄4" (6mm) tempered masonitebacking. Furnished with four mounting screws. STANDARD STOCK SIZES B-1556 SERIESMIRROR
Model No. Width Height
B-1556 1620 15 1⁄2" 19 1⁄2" (39 x 50cm)ƒƒB-1556 1824 17 1⁄2" 23 1⁄2" (44 x 60cm)
B-1556 1830 17 1⁄2" 29 1⁄2" (44 x 75cm)ƒƒB-1556 2436 23 1⁄2" 35 1⁄2" (60 x 90cm)
Channel Frame Channel Frame/Shelf Tilt MirrorsB-166 SERIES MIRROR/SHELF COMBINATIONB-165 Series stainless steel channel-frame mirrorwith one-piece type 304, satin-finish stainless steelshelf. Shelf projects 5" (127mm) and has 3⁄8"(10mm) return edges on front and sides. Frontreturn edge of shelf hemmed for maximum rigidity.Concealed 16-gauge (1.6mm) stainless steelbrackets attach shelf to mirror frame.STANDARD STOCK SIZESB-166 SERIES MIRROR/SHELF
Model No. Width Height
B-166 1824 18" 24" (46 x 61cm)ƒƒB-166 1830 18" 30" (46 x 76cm)
B-166 1836 18" 36" (46 x 91cm)ƒƒB-166 2436 24" 36" (61 x 91cm)
SPECIAL-ORDER CUSTOM SIZE MIRRORSMaximum size mirror: 24" x 60" (61 x 152cm).Maximum shelf length: 24" (61cm). Custom sizemirrors locked to wall hanger with two concealed theft-resistant screws on bottom of mirror. To specifyspecial sizes, use Series Number followed by width andheight.
B-293 SERIES TILT MIRRORS Provide visibility for wheelchair patients. Frame is type
304 stainless steel, satin finish. Beveled edges offrame hug mirror; provides gapless fit for improvedappearance, and safety when cleaning mirror. No. 1quality, 1⁄4" (6mm) glass mirror electrolytically copperplated. Mirror extends 4" (100mm) from wall at topand tapers to 1" (25mm) at bottom.STANDARD STOCK SIZES B-293 SERIES MIRROR
Model No. Width Height
ƒB-293 1630 16" 30" (41 x 76cm)ƒB-293 1830 18" 30" (46 x 76cm)ƒƒB-293 1836 18" 36" (46 x 91cm)ƒB-293 2436 24" 36" (61 x 91cm)
SPECIAL-ORDER CUSTOM SIZE MIRRORSMaximum size mirror: 36" x 48" (914 x 1219mm).
B-294 SERIES TILTING MIRRORS Tiltforward to provide full visibility for wheelchair
patients or return to upright position. Frame is œ" x œ" (19 x 19mm), type 304 stainless steel angle,satin finish. Beveled edges of frame hug mirror;provides gapless fit for improved appearance, andsafety when cleaning mirror. No. 1 quality, 1⁄4"(6mm) glass mirror electrolytically copper-plated. Topof mirror tilts 7" (180mm) from wall with self-lockingmechanisms; bottom of mirror mounts to wall withfull-length stainless steel hinge.STANDARD STOCK SIZES B-294 SERIES MIRROR
Model No. Width Height
ƒB-294 1624 16" 24" (41 x 61cm)ƒB-294 1630 16" 30" (41 x 76cm)
SPECIAL-ORDER CUSTOM SIZE MIRRORSMaximum size mirror: 30" x 36" (762 x 914mm).
B-293
Vandal-Resistant
B-294
B-165 SERIES FRAMED MIRRORS One-piecechannel frame is 1⁄2" x 1⁄2" x 1⁄2" (13 x 13 x 13mm),type 430 stainless steel with bright polished finishand mitered corners. Phillips-head frame screwpermits easy replacement of mirror. No. 1 quality,1⁄4" (6mm) glass mirror electrolytically copper-plated;warranted against silver spoilage for 10 years.Mirror corners and back protected by shockabsorbing material. Galvanized steel back. Mirrorsecured to concealed wall hanger with theft-resistant locking device.STANDARD STOCK SIZES B-165 SERIESMIRROR
Model No. Width Height
B-165 1624 16" 24" (41 x 61cm)ƒB-165 1824 18" 24" (46 x 61cm)ƒB-165 1830 18" 30" (46 x 76cm)ƒB-165 1836 18" 36" (46 x 91cm)ƒƒB-165 2430 24" 30" (61 x 76cm)ƒB-165 2436 24" 36" (61 x 91cm)
B-165 2448 24" 48" (61 x 122cm)ƒƒB-165 2460 24" 60" (61 x 152cm)
B-165 3636 36" 36" (91 x 91cm)B-165 4836 48" 36" (122 x 91cm)B-165 6036 60" 36" (152x 91cm)
SPECIAL-ORDER CUSTOM SIZE MIRRORSMaximum size mirror: 72" x 60" (183 x 152cm).Custom size mirrors locked to wall hanger with twoconcealed theft-resistant screws on bottom of mirror.To specify special sizes, use Series Number followedby width and height.
B-942 FRAMELESS MIRROR (Secured From Front)Mirror is 11 1⁄4" x 17 1⁄4" (285 x 440mm) overall, 1⁄4"(6mm) deep. 18-gauge (1.2mm), type 430 stainlesssteel with bright polished finish.
B-165 SERIES
20
WA
RM
-AIR
HA
ND
/H
AIR
DR
YER
S
Recessed AirCraft Dryers
13-1/2"345mm
9-1/4"235mm
12"305mm
3-9/16"90mm
15-5/8"395mm
4"100mm
Surface-Mounted AirCraft Dryers
13-3/4"350mm
10-3/8"265mm
7-1/4"185mm
Surface-Mounted B-740, B-748 Eclipse
15-13/32"390mm
8-7/8"225mm
7-17/32"190mm
Surface-MountedB-710 Compac
10-13/16"275mm
10-15/16"280mm
5-3/16"130mm
Surface-Mounted B-708 AirGuard, B-709 AirPro
13-3/16"335mm
10-5/16"260mm
7-1/2"190mm
Surface-Mounted B-705 Cub
9-5/8"245mm
11-1/8"285mm
5-7/16"140mm
Rough Wall Opening: 13 3⁄4" (350mm) wide9 1⁄2" (240mm) high3 3⁄4" (95mm) deep
AUTOMATIC HAND DRYERS
Model Mounting Cover Materials Color Cycle Electrical Specs Limited Warranty Price Index
B-7507 AirCraft Recessed Vitreous Enamel, Cast Iron Color Sensor 1 10 years 1.8ƒ B-750 AirCraft Recessed Vitreous Enamel, Cast Iron White Sensor 1 10 years 1.7
B-7007 AirCraft Surface Vitreous Enamel, Cast Iron Color Sensor 1 10 years 1.6ƒ B-700 AirCraft Surface Vitreous Enamel, Cast Iron White Sensor 1 10 years 1.5
B-748 Eclipse Surface Drawn Steel Chrome-Plated Sensor 4 10 years 1.2ƒ B-708 AirGuard Surface Vitreous Enamel, Cast Iron White Sensor 1 10 years 1.0ƒ B-709 AirPro Surface Painted, Cast Aluminum White Sensor 1 5 years 0.9ƒ B-740 Eclipse Surface Vitreous Enamel, Drawn Steel White Sensor 4 10 years 0.7ƒ B-710 Compac Surface Molded Plastic Grey Sensor 3 1 year 0.5ƒ B-705 Cub Surface Molded Plastic White Sensor 2 1 year 0.4
TOUCH BUTTON HAIR DRYERS
B-731 AirCraft Surface Vitreous Enamel, Cast Iron White 80 Sec. 1 10 years 1.4
ELECTRICAL SPECIFICATIONS
Key Model(s)
1. B-700 B-731B-7007 B-750B-708 B-7507
ƒ115V AC, 20 Amp, 2300 Watts, 50/60 Hz, or
B-709208–240V AC, 9–10 Amp, 1900–2300 Watts, 50/60 HzAirCraft®, AirGuard™ and AirPro™ dryers are also VDEapproved and CE marked.
Key Model(s)
2. B-705 ƒ115V AC, 9 Amp, 1035 Watts, 60 Hz3. B-710 ƒ115V AC, 15 Amp, 1725 Watts, 60 Hz4. B-740 B-748 ƒ115V AC, 20 Amp, 2300 Watts, 50/60 Hz, or
ƒ208–240V AC, 9–10 Amp, 1900–2300 Watts, 50/60 Hz.Eclipse Dryers are also VDE approved and CE marked.
HOW TO ORDER: Specify voltage by adding 115V or 230V following model number. Example, B-700 115V.
Note: Models B-705 Cub and B-710 Compac dryers are not designed for vandal-prone installations. For vandal-prone installations, use Bobrick AirCraft and B-708 AirGuarddryers with cast-iron vitreous enamel finished covers, or B-740 Eclipse dryer with drawn steel, vitreous enamel finished cover.
Warm Air Hand/Hair Dryers fromThe Dryer Company.™
Choose from a comprehensive line of models designed andengineered for all building types and washroom environmentneeds, including vandal-resistant requirements. Save up to95% over paper towel usage, plus additional maintenancecost savings. All dryers are UL and c-UL listed.
Price index comparisons help youspecify to your project’s budgetcriteria.The Price Index column will assist you in your selection asyou compare cover materials and vandal-resistant featuresappropriate for your project. Bobrick’s B-708 AirGuard™ isthe industry standard for vitreous enamel on cast iron con-struction and therefore has an index of 1.0. The B-740 offersexcellent durability and design distinction with an index of0.7, while Bobrick’s flagship AirCraft® Series begins with anindex of 1.4.
ƒ USA & Canada QuickShip model. ƒƒ USA QuickShip model.
INSTALLATION NOTEBobrick automatic hand dryers shouldbe installed 15" (380mm) above anyprojection or horizontal surface whichmay interfere with the operation of theautomatic sensor.
Bobrick exclusive: Eclipse™ Dryers
21
WARRANTIESFor product warranties and limitations information, see page 4.
BARRIER-FREE WASHROOM GUIDELINES WARM-AIR HAND DRYERS. Start buttons should be operable with one hand and with no more than 5 poundsof force (22.2 N), and they should protrude and be a contrasting color from surrounding material so visuallyimpaired people can see them well and blind people can feel them easily; otherwise, provide automaticdryers with no-touch operation. When a single dryer is installed in a washroom, it is recommended that thebottom of the dryer or the start button on Model B-731 be located 38" to 40" (965– 1220mm) above thefinish floor, with at least 30" x 48" (760 x 1220mm) of clear floor space centered in front of the unit toallow both left- and right-hand wheelchair approaches. When two or more dryers are installed, mount onedryer so the bottom of the dryer or the start button of Model B-731 is 38" to 40" (965–1220mm) above thefinish floor and locate others at 41" to 48" (1040–1220mm), and alternate left- and right-hand approaches.
B-740 ECLIPSE™ HAND DRYER.Contemporary styling; durable, drawn steel whitevitreous enamel cover.
B-748 ECLIPSE™ HAND DRYER. Contemporary styling, durable, drawn steel bright-polished chrome-plated cover.
B-700, B-7007 AIRCRAFT® HAND DRYERS.B-731 AIRCRAFT® HAIR DRYER. Cast-iron withvitreous enamel finish. B-700 shown.
B-710 COMPACDRYER.™ Contemporary styling.Hand dryer with one-piece grey-molded cover.
B-708 AIRGUARD™ HAND DRYER.Durable cast-iron with white vitreous enamel cover.
B-705 CUB™ HAND DRYER. One-piece white-molded cover.
B-709 AIRPRO™ HAND DRYER.Durable cast aluminum white painted cover.
• 11 styling, performance and pricingchoices.
• Six distinctive design concepts.
• Five cover materials/finishes.
• Five vandal-resistance levels.
• Five electronic platforms.
• No-touch operation improves hygiene.
• Environmentally responsible.
• Eliminates paper costs, vandalism and expensive waste disposal.
• QuickƒShip within two days of order.
WA
RM
-AIR
HA
ND
/H
AIR
DR
YER
S
B-750, B-7507 ADA/BARRIER-FREECOMPLIANT AIRCRAFT® HAND DRYERS.
Cast-iron with vitreous enamel finish. B-750 shown.
AIRCRAFT DRYER COLORS:
Specify color by adding color number preceded bynumber symbol # following voltage. Example, B-7007115V #889. Colors are printed reproductions and areshown for descriptive purposes only.
Bobrick dryer models B-700, B-7007, B-705, B-710, B-731,B-740, B-748, B-750, and B-7507 are patented.
848 Ivory
889Grey
828 Black
22
1090 S
IER
RA
™SER
IES S
OLI
D C
OLO
R R
EIN
FOR
CED
CO
MP
OSIT
E ( S
CR
C)
TOIL
ET P
AR
TITI
ON
S
OPTIONAL OCCUPANCY INDICATOR DOOR LATCHThrough-the-door stainelss steel construction.Red-green occupancy indicator. Emergencyaccess feature. Available on special order.See pages 27, 28 or 29 for photo.
OVERHEAD-BRACED INSTALLATIONConfiguration maximizes structural stability and vandal-resistance.
1090 Sierra™ Series New Solid Color Reinforced Composite (SCRC)Toilet Partitions.
Solid Color Clear ThroughGraffiti Cleans Without GhostingResists Scratching, Gouging, Dents andImpactsHeavy Duty Stainless Steel HardwareSierra™ Series Protects Against:
THROUGH-BOLTED HARDWAREFor added strength and resistance to vandalism,stainless steel through-bolted fasteners are usedto attach panel-to-stile brackets, clothes hooks,and latch keepers to stiles. Vandal-resistantfasteners have Pin-in-Head Torx Screw headsexposed on the exterior and interior of the toiletcompartment.
1092.67 OPTION INSTITUTIONAL HARDWAREHeavy-duty, type 304 satin-finish stainless steel.(1) Through-bolted panel-to-stile U-channel and (2)spring-loaded, self-closing hinge run full height ofpanels and doors, (3) vandal-resistant door stops,and (4) reinforced latch with through-bolted keeper.Patented, one-piece shoe conceals stile levelingdevice. Clothes hook not included.STILE BASE, LEVELING DEVICE
7-gauge, 3⁄16" (5mm) thick, corrosion-resistantsteel angle leveling bar is factory-installed to baseof Solid Color Reinforced Composite (SCRC) stile.3⁄8" (10mm) diameter, stainless steel wedge flooranchors require 2" (51mm) penetration into 3"(76mm) thick structural concrete floor.
MATERIALDoors, stiles: 3⁄4" (19mm) thick; panels: 1⁄2" (13mm)thick. Solid Color Reinforced Composite (SCRC) iscomposed of dyed organic fibrous material rein-forced with polycarbonate and phenolic resinsbetween clear Melamine surface sheets. Material isintegrally-bonded to form a solid homogenous panelwith thermal and mechanically-applied pressure.SCRC has solid color throughout.
Paint and marker ink; ultra-hardGraffitiOff™ Surface facilitateseasy cleaning.
Dents, impacts, gouging,carving and chemicals.
Hose-down maintenance andenvironmental moisture.
Corrosion and structural failure.
Flame spread and smokedevelopment. Has ICC, NFPAClass B ASTM E 84 test resultclassification.
Contributes to LEED Certifi-cation Program.
Specify for washrooms where maximum vandal-resistance is a must: schools,recreation centers, theme parks, public stadiums, theaters, and criminaljustice facilities. 4 RapidƒResponse colors: 10-day order fulfillment. 10-yearlimited warranty against breakage, corrosion and delamination. For productwarranties and limitations information, see page 4. Patent pending.
1 2
54
3
1
2
3
4
1092 HEAVY-DUTY HARDWAREHeavy-gauge, type 304 satin-finish stainless steel.(1) Hinge adjusts for partial opening or self-closingdoor. Features (2) through-bolted panel-to-stilebrackets, (3) reinforced latch with through-boltedkeeper, (4) vandal-resistant door stops, and (5)through-bolted clothes hook. Patented, one-pieceshoe conceals stile leveling device. For emergencyaccess, door lifts from outside.
Standard Features
FACTORY-INSTALLED THREADED INSERTSThreaded brass inserts are factory-installed forsecuring door hinges, door latch and door stops;speeds job-site installation. Each insert withstandsover 1,500 pounds (6672 N) of pull out force.Vandal-resistant Pin-in-Head Torx Screws attachhinges, door stops, door latch keepers andmounting hardware.
Optional Features
23
1090 S
IERR
A™
SER
IES S
OLID
CO
LOR
REIN
FOR
CED
CO
MP
OSITE (SC
RC
)TO
ILET PA
RTITIO
NS
SUPERIOR NON-GHOSTING GRAFFITI REMOVALMetallic marking pens, markers containing xylene, and other permanentmarkers, acrylic and enamel paints are removed by quality D-limonene-based graffiti removers. See Bobrick Advisory Bulletin TB-80 for ASTM D6578-00 results.
SOLID COLOR CLEAR THROUGH/REPAIRABILITYMinimize light scratches by wiping with D-limonene-based graffitiremover, or a high-solid-content silicone sealant; repair moderatescratches by applying a matching color crayon; heavy gouges can besanded and sealed. See Bobrick Advisory Bulletin TB-81 for details.
SUPERIOR SCRATCH AND DENT RESISTANCESierra™ Series Solid Color Reinforced Composite (SCRC) ultra-hardGraffitiOff™ Surface resists scratching, gouging, denting. See BobrickAdvisory Bulletins TB-79 and TB-78 for ASTM D 2197-98(2002) andD 2794-93(1999)e1 results.
CONTRIBUTES TO LEED PROGRAM CERTIFICATIONSolid Color Reinforced Composite (SCRC) meets the demand for environ-mental sustainability in architectural design. In some states, steppedtax credits are offered to commercial buildings for different levelsof LEED Certification. See Bobrick Advisory Bulletin TB-77 for details.
1090 10-DAY RAPIDƒRESPONSE™
ORDER FULFILLMENT AT NO EXTRA CHARGEBobrick will ship up to 25, Sierra™ Series ToiletCompartments within 10 workdays after receipt ofapproved drawings at no extra charge. Includes fourstandard colors and Overhead-Braced InstallationConfiguration only.
PRICE
INDE
X TrimLine P-Lam Stainless Steel-Edged 2.3DuraLine Phenolic/Moisture-Resistant 2.2Sierra Solid Color Reinforced Composite 2.1Designer P-Lam/Steel-Core Stiles 1.7Classic P-Lam/Budget-Priced 1.0
Notes: Minor edge nicks and random color variations are a normal consequence of manufacturing materialcontaining natural fibers. Sierra™ Series Solid Color Reinforced Composite (SCRC) colors are printedreproductions and are for descriptive purposes only. Request actual color samples for color confirmation.
SC01 Golden Khaki SC02 Desert Biege SC03 Terra Cotta SC04 Forest Green
The new generation of toilet partitions.
1090 SIERRA™ SERIES PRODUCT SELECTOR CHART
Standard Optional FeatureConfiguration Series Institutional Hardware
Overhead-Braced 1092 1092.67
Now you can brighten your restrooms with Sierra™ Series contemporary earthtones, and withGraffitiOff™ Surface you no longer need black toilet partitions to minimize the partial orunsuccessful removal of graffiti.
Earthtone Color Collection.DESIGNER’S NOTEPer ASTM E 84 Tests:
Flame Smoke ICC/NFPASeries Spread Developed ASTM E 84
Index Index Classification1090 Series1⁄2" (13mm) Panels 45 120 Class B3⁄4" (19mm) Doors, Stiles 45 95 Class BSee Bobrick Advisory Bulletin TB-73.
24
THREADED INSERTSThreaded inserts are factory installed for securinghinges. Vandal-resistant, Pin-in-Head Torx Screwsfor all hardware; saves installation time and costs.
CONCEALED HARDWAREHeavy-duty, type 304 satin-finish stainless steel;for emergency access, door lifts from outside. Hingecan be adjusted for a partial opening or self-closingdoor; patented, one-piece shoe conceals stile leveling device.
Standard Features Optional Features
.67 OPTION INSTITUTIONAL HARDWAREAll configurations. Extra-heavy-duty, type 304 satin-finish stainless steel; angle brackets, U-channelsand spring loaded, self-closing hinge run full heightof panels and doors; for emergency access, doorlifts from outside. Doorstops are vandal-resistant. Coat hooks are not furnished, available as optionalaccessory. All fasteners are Pin-in-Head TorxScrews; patented, one-piece shoe conceals stileleveling device. To specify, add .67 suffix to SeriesNumber.
OCCUPANCY INDICATOR DOOR LATCH Through-the-door stainless steel construction withred-green occupancy indicator, and emergencyaccess feature. Available on special order. Seepages 27, 28 or 29 for photo.
BEAUTIFUL INSTALLATIONConcealed hardware provides crisp, clean flush architectural appearance.
Gouging, carving, and scratching.
Paints and marker inks. Graffiticleans without ghosting.
Flame spread and smoke develop-ment. Has ICC, NFPA Class A or BASTM E 84 test result classification.
1080 A
ND
1180 D
UR
ALI
NE™
SER
IES S
OLI
D P
HEN
OLI
C T
OIL
ET P
AR
TITI
ON
S
Hose-down maintenance and environmental moisture.
Dents and impacts in vandal-prone heavy-use washrooms.
Corrosion and structural failure.
Peeling and delamination.
1080/1180 DuraLine™ Series Solid Phenolic Toilet Partitions.
PRICE
INDE
X TrimLine P-Lam Stainless Steel-Edged 2.3DuraLine Phenolic/Moisture-Resistant 2.2Sierra Solid Color Reinforced Composite 2.1Designer P-Lam/Steel-Core Stiles 1.7Classic P-Lam/Budget-Priced 1.0
STILE BASE, LEVELING DEVICE7-gauge, 3⁄16" (5mm) thick, corrosion-resistant steel,angle leveling bar is factory installed to base of solidphenolic stile. 3⁄8" (10mm) diameter stainless steelwedge floor anchors require minimum 2" (51mm)penetration into 3" (76mm) thick structural concretefloor.
Durable, Ultra-Hard Surfaces Stout, Solid-Core ConstructionHeavy-Duty Concealed Stainless SteelHardwareDuraLine™ Series Provides Protection Against:
Specify for washrooms where architectural design and maximum durability aredesired, from class A corporate office buildings to schools, stadiums and themeparks. 18 RapidƒResponse™ colors; 10-day order fulfillment. 15-year limitedwarranty against breakage, corrosion and delamination. For product warrantiesand limitations information, see page 4
DESIGNER’S NOTEPer ASTM E 84 Tests:
Flame Smoke ICC/NFPASeries Spread Developed ASTM E 84
Index Index Classification1180 Series1⁄2" (13mm) Panels 15 25 Class A3⁄4" (19mm) Doors, Stiles 15 20 Class A1080 Series1⁄2" (13mm) Panels 30 55 Class B3⁄4" (19mm) Doors, Stiles 30 20 Class BSee Bobrick Advisory Bulletin TB-73.
MATERIALDoors and stiles: 3⁄4" (19mm) thick. Panels: 1⁄2"(13mm) thick. Solid phenolic core with multiple resin-impregnated kraft, color and clear Melamine surfacesheets fused at high temperature and pressure.Black edges provide design detail.
25
1080 AND 1180 DURALINE™ SERIES PRODUCT SELECTOR CHART
Standard Optional FeatureConfiguration Series Institutional Hardware
Floor-Anchored 1081/1181 1081.67/1181.67
Overhead-Braced 1082/1182 1082.67/1182.67
Floor-to-Ceiling 1086/1186 1086.67/1186.67
Ceiling-Hung 1088/1188 1088.67/1188.67
1080 10-DAY RAPIDƒRESPONSE™
ORDER FULFILLMENT AT NO EXTRA CHARGERapidƒResponse Order Fulfillment Program ships up to 25, 1080 compartments within 10workdays of receipt of approved drawings. Includes 18 standard colors, and four mounting configurations: Overhead-Braced, Floor-Anchored, Floor-to-Ceiling and Ceiling-Hung.
1080/1180 D
UR
ALIN
E™
SER
IES S
OLID
PH
ENO
LIC TO
ILET PA
RTITIO
NS
IMPORTANT NOTE: Solid Phenolic Colors are printed reproductions and are for descriptive purposes only. Refer to manufacturer’s samples for absolute color fidelity. ColorGuide and samples are available from Bobrick on request. Additional colors are available and may be subject to extra charges and longer lead times.Arborite is a registered trademark of Arborite, Division of ITW Canada. Trespa is a registered trademark of Trespa International BV.
Standard Solid Phenolic Colors See page 31 for RapidƒResponse program.Arborite® and Trespa® color numbers
E0-00 White S-463 Antique White S-445 Almond S-436 Sand S-431 Willow Grey E8-23 Raspberry
S-542 Limousine Grey S-513 Denim Blue S-440 Navy S-520 Springtime E0-09 Black P-705 White Speckle
S0-00 White Specks P-886 Grey Grit P-887 Beige Grit S0-04 Mid Grey P-500 Black Star C0-09 Black Craquele
HOSE-DOWN MAINTENANCESolid phenolic resists moisture and is ideal for installations in shower rooms and adjacent to swimming pools.
GRAFFITI REMOVALUltra-hard chemical-resistant surface facilitates complete removal of marker ink, lipstick and paint without ghosting, using acetone- or D-limonene-based cleaners.
STRUCTURAL STRENGTH Solid phenolic panels, doors and stiles, and Institutional full-height hardware,combine for maximum durability.
For stadiums, transportation centers, parks and recreational facilities.
26
MATERIALDoors, stiles and panels: 1" (25mm) finished thickness, 3-ply, 45-lb density, resinimpregnated, impact-resistant particle board construction; scratch-, graffiti- andcorrosion resistant plastic laminate edges and surfaces.
OVERHEAD-BRACED STILE BASE, LEVELING DEVICE12-gauge, 3" x 1 1⁄4" (76 x 32mm) plated steel bracket attached to bottom of stile;furnished with leveling bolt, stainless steel shoe retainer, floor “L” bracket, screwsand plastic anchors.
FLOOR-ANCHORED STILE BASE, LEVELING DEVICE3⁄8" x 1" (10 x 25mm) steel bar, zinc-chrome plated, bolted to stile; furnished 3⁄8"(10mm) diameter stainless steel wedge floor anchors require minimum 2" (51mm)penetration into 3" (76mm) thick structural concrete floor.
HARDWAREThrough-bolted hinges, door latches, door keepers, coat hooks, and mountinghardware constructed of bright-polished chrome-plated Zamak. For emergencyaccess, door lifts from the outside; patented, one-piece, satin-finish stainless steelshoe conceals stile leveling device.
Standard Features
1540 Classic™ SeriesBudget-Priced Partitions
MOST POPULAR INSTALLATIONOverhead-Braced configuration provides strength and stability for most moderate-use installations.
1540 C
LASSIC
™SER
IES P
LASTI
C L
AM
INA
TE T
OIL
ET P
AR
TITI
ON
S
27
.63 OPTION STILE BASE WITH WELDED-STEEL CORE LEVELING DEVICEAll configurations. 11-gauge steel core, welded to 3⁄8" x 7⁄8" (10 x 22mm) steel barforming a single structural unit; furnished 3⁄8" (10mm) diameter, stainless steelwedge floor anchors require minimum 2" (51mm) penetration into minimum 3"(76mm) thick structural concrete floor. To specify, add .63 suffix to Series No.
.64 OPTION STAINLESS STEEL HARDWAREAll configurations. Heavy-duty, type 304 satin-finish stainless steel; cast, through-bolted mortised hinges and clothes hook; emergency access door keeper;concealed stile and panel mounting brackets; patented, one-piece, shoe concealsleveling device. To specify, add .64 suffix to Series Number.
1540 CLASSIC™ SERIES PRODUCT SELECTOR CHART
Optional Features Standard Stile Base with Stainless Stile Base with Welded
Configuration Series Welded Steel Steel Core and Steel Core Hardware Stainless Steel Hardware
Floor-Anchored 1541 1541.63 1541.64 1541.63/.64
Overhead-Braced 1542 1542.63 1542.64 1542.63/.64
Ceiling-Hung 1548 1548.63 1548.64 1548.63/.64
PRICE
INDE
X TrimLine P-Lam Stainless Steel-Edged 2.3DuraLine Phenolic/Moisture-Resistant 2.2Sierra Solid Color Reinforced Composite 2.1Designer P-Lam/Steel-Core Stiles 1.7Classic P-Lam/Budget-Priced 1.0
OCCUPANCY INDICATOR DOOR LATCH Through-the-door stainless steel construction withred-green occupancy indicator, and emergencyaccess feature. Available on special order.
1540 Classic™ Series Budget-PricedToilet PartitionsDurable Plastic Laminate SurfacesIndustrial Grade Particle Board Alternative to dent, scratch and corrosion-prone hollow-core metal partitionsClassic™ Series Engineering Resists:Dents and impacts in moderate-use commercial, institutionaland industrial washrooms.
Scratching and gouging.
Paint and marker ink. Graffiti cleans without ghosting.
Corrosion and structural failure.
Flame spread and smoke development. Has ICC, NFPA Class BASTM E 84 test result classification.
Standard Features Summary:
Doors, stiles and panels: 1" (25mm) finishedthickness.Chrome-plated, through-bolted Zamakhardware.
Emergency access door keeper.
35 RapidƒResponse™ colors.
10-day order fulfillment.
1540 C
LASSIC
™SER
IES P
LASTIC
LAM
INA
TE TOILET P
AR
TITION
S
DESIGNER'S NOTE:Per ASTM E 84 Tests: 1540 Series, Flame Spread Index 60, Smoke Developed Index, 300. 1540 Series meetsICC, NFPA Class B Classification. See Bobrick Advisory Bulletin TB-73.
Note: Classic™ Series toilet partitions are not designed for high-traffic or vandal-prone environments.Sierra™ Series and DuraLine™ Series vandal-resistant partitions are recommended for washrooms subject toheavy use and abuse.
Optional Features
28
T-NUTSThreaded inserts are factory installed for securinghinges. Vandal-resistant, Pin-in-Head Torx Screwsfor mounting all hardware; saves installation timeand costs. T-nuts are factory installed for securingdoor latch.
CONCEALED HARDWAREHeavy-duty, type 304 satin-finish stainless steel;for emergency access, door lifts from outside. Hingecan be adjusted for a partial opening or self-closingdoor; patented, one-piece shoe conceals stile leveling device.
.65 OPTION FULL-HEIGHT HARDWAREAll configurations. Extra-heavy-duty, type 304 satin-finish stainless steel; angle brackets, U-channelsand spring loaded, self-closing hinge run full heightof panels and doors; for emergency access, doorlifts from outside; all fasteners are Pin-in-Head TorxScrews; patented, one-piece, shoe conceals stileleveling device. To specify, add .65 suffix to SeriesNumber selected.
1040 DESIGNER™ SERIES PRODUCT SELECTOR CHART
Standard Optional FeatureConfiguration Series Full-Height Hardware
Floor-Anchored 1041 1041.65
Overhead-Braced 1042 1042.65
Ceiling-Hung 1048 1048.65
MATERIALDoors, stiles and panels: 1" (25mm) finished thickness, 3-ply, 45-lb density, resin impregnated,impact-resistant particle board construction; scratch-,graffiti-and corrosion resistant .050" (1mm) thick,plastic laminate edges and surfaces.
STILE BASE, LEVELING DEVICE11-gauge steel core welded to 3⁄8" x 7⁄8" (10 x 22mm)steel leveling bar, forming a single structural unit.Furnished 3⁄8" (10mm) diameter, stainless steelwedge floor anchors require minimum 2" (51mm)penetration into minimum 3" (76mm) thick structuralconcrete floor.
THREADED INSERTS
Standard Features Optional Features
EASY MAINTENANCE INSTALLATIONCeiling-Hung configuration facilitates compartment floor access.
OCCUPANCY INDICATOR DOOR LATCH Through-the-door stainless steel construction withred-green occupancy indicator, and emergencyaccess feature. Available on special order.
1040 Designer™ Series P-Lam ToiletPartitions With Steel-Core StilesSteel-Core Reinforced Stiles Durable Plastic Laminate Surfaces Industrial Grade Particle BoardConcealed Heavy-Duty HardwareDesigner™ Series Delivers Strength Against:Dents and impacts in heavy-traffic retail, foodservice andindustrial washrooms.
Scratching and gouging. Paint and marker ink. Graffiti cleans without ghosting.Corrosion and structural failure.Flame spread and smoke development. Has ICC, NFPA Class BASTM E 84 test result classification.
Select for commercial, institutional and industrial washrooms where design plusdurability are desired. 35 RapidƒResponse™ colors; 10-day order fulfillment.
PRICE
INDE
X TrimLine P-Lam Stainless Steel-Edged 2.3DuraLine Phenolic/Moisture-Resistant 2.2Sierra Solid Color Reinforced Composite 2.1Designer P-Lam/Steel-Core Stiles 1.7Classic P-Lam/Budget-Priced 1.0
1040 D
ESIG
NER
™SER
IES P
LASTI
C L
AM
INA
TE T
OIL
ET P
AR
TITI
ON
S
DESIGNER'S NOTE:Per ASTM E 84 tests: 1040 Series, Flame SpreadIndex 60, Smoke Developed Index 195. 1040 Seriesmeets ICC, NFPA Class B Classification. See BobrickAdvisory Bulletin TB-73.
29
CONCEALED HARDWAREHeavy-duty, type 304 satin-finish stainless steel;for emergency access, door lifts from outside. Hingecan be adjusted for a partial opening or self-closingdoor; patented, one-piece shoe conceals stile leveling device.
1030 TRIMLINE™ SERIES PRODUCT SELECTOR CHART
Standard Optional FeatureConfiguration Series Full-Height Hardware
Floor-Anchored 1031 1031.65
Overhead-Braced 1032 1032.65
Ceiling-Hung 1038 1038.65
MATERIALDoors, stiles and panels: 1" (25mm) thick, 3-ply,45-lb density, impact-resistant particle board construction; scratch-, graffiti-and corrosion-resistant.050" (1mm) thick, plastic laminate surfaces; laminate routed for a flush fit of stainless steel edge.
STILE BASE, LEVELING DEVICE11-gauge steel core welded to 3⁄8" x 7⁄8" (10 x 22mm)steel leveling bar, forming a single structural unit.Furnished 3⁄8" (10mm) diameter, stainless steelwedge floor anchors require minimum 2" (51mm)penetration into minimum 3" (76mm) thick structuralconcrete floor.
T-NUTSThreaded inserts are factory installed for securinghinges. Vandal-resistant, Pin-in-Head Torx Screws formounting all hardware; saves installation time andcosts. T-nuts are factory installed for securing doorlatch.
THREADED INSERTS
Standard Features Optional Features
.65 OPTION FULL-HEIGHT HARDWAREAll configurations. Extra-heavy-duty, type 304 satin-finish stainless steel; angle brackets, U-channelsand spring loaded, self-closing hinge run full heightof panels and doors; for emergency access, doorlifts from outside; all fasteners are Pin-in-Head TorxScrews; patented, one-piece shoe conceals stileleveling device. To specify, add .65 suffix to SeriesNumber.
HIGH-CEILING INSTALLATIONFloor-Anchored configuration accommodates high ceiling washrooms.
OCCUPANCY INDICATOR DOOR LATCH Through-the-door stainless steel construction withred-green occupancy indicator, and emergencyaccess feature. Available on special order.
1030 TrimLine™ Series P-Lam Toilet Partitions WithStainless Steel Edge TrimDesign Accent and Edge ProtectionDurable Plastic Laminate SurfacesIndustrial Grade Particle BoardSteel-Core Reinforced StilesTrimLine™ Series Defends Against:Dents, impacts and edge damage in heavy-use and abuse publicwashrooms.Scratching, gouging.Paint and marker ink. Graffiti cleans without ghosting.Corrosion and structural failure.Flame spread and smoke development. Has ICC, NFPA Class BASTM E 84 test result classification.
Install in vandal-prone institutional, retail and foodservice washrooms.35 RapidƒResponse™ colors; 10-day order fulfillment.
1030 TR
IMLIN
E™
SER
IES P
LASTIC
LAM
INA
TE TOILET P
AR
TITION
S
DESIGNER'S NOTE:Per ASTM E 84 tests: 1030 Series, Flame SpreadIndex 60, Smoke Developed Index 265. 1030 Seriesmeets ICC, NFPA Class B Classification. See BobrickAdvisory Bulletin TB-73.
PRICE
INDE
X TrimLine P-Lam Stainless Steel-Edged 2.3DuraLine Phenolic/Moisture-Resistant 2.2Sierra Solid Color Reinforced Composite 2.1Designer P-Lam/Steel-Core Stiles 1.7Classic P-Lam/Budget-Priced 1.0
30
OVERHEAD-BRACED SHOWER DIVIDERS with shower curtain track and hooks in headrail. Optional benches are available.
WALL-HUNG URINAL SCREENS FLOOR-ANCHORED URINAL SCREENS POST-TO-CEILING URINAL SCREENS
Shower Dividers, Dressing Compartments, And Urinal ScreensSH
OW
ER D
IVID
ERS,
DR
ESSIN
G C
OM
PA
RTM
ENTS
, U
RIN
AL
SC
REE
NS
SHOWER DIVIDERS, DRESSING COMPARTMENTS, AND URINAL SCREENS SELECTOR CHART
Urinal Screen ConfigurationsSeries Shower Dividers Dressing Compartments Floor- Post-to- Wall- Ceiling-
Overhead-Braced Overhead-Braced Anchored Ceilng Hung Hung
Classic™ Series NR 1542 1541 N/A 1545 1548
Designer™ Series NR 1042 1041 1043 1045 1048
TrimLine™ Series NR 1032 1031 1033 1035 1038
DuraLine™ Series 1082/ 1082/ 1081/ 1083/ 1085/ 1088/1182 1182 1182 1183 1185 1188
Sierra™ Series 1092 1092 N/A 1093 1095 N/A
NR: Not recommended for wet areas.N/A: Not available.
For design-integration, coordinate urinal, entrancescreens, shower dividers and dressing compart-ments with toilet partitions. Select Solid ColorReinforced Composite (SCRC) 1090 Series or SolidPhenolic Core 1080/1180 DuraLine™ Series showerdividers and dressing compartments for wet-areas.Overhead-braced configuration can be furnished withshower curtains, curtain track and hooks concealedin headrail. Optional benches with stainless steelsupport brackets are available.
PRICE
INDE
X TrimLine P-Lam Stainless Steel-Edged 2.3DuraLine Phenolic/Moisture-Resistant 2.2Sierra Solid Color Reinforced Composite 2.1Designer P-Lam/Steel-Core Stiles 1.7Classic P-Lam/Budget-Priced 1.0
31
RA
PIDƒ
RES
PO
NSE
™/P
LASTIC
LAM
INA
TE CO
LOR
GU
IDE
MATERIALS/SERIES: Sierra, DuraLine, Classic, Designer, TrimLine.ALL STANDARD COLORS: 35 Plastic Laminate, 18 Solid Phenolic, 4 SolidColor Reinforced Composite (SCRC).ALL MOUNTING CONFIGURATIONS: Ceiling-Hung, Floor-Anchored, Overhead-Braced and Floor-to-Ceiling Anchored. Sierra™ Series Overhead-Braced only.NO EXTRA CHARGE: For RapidÏResponse 2-week Order Fulfillment Program.
RapidƒResponse™ 2-Week Toilet PartitionOrder Fulfillment Program
IMPORTANT NOTE: Plastic Laminate Colors above are printed reproductions and are for descriptive purposes only. Refer to manufacturer’s samples for absolute colorfidelity. Color Guide and samples are available from Bobrick on request. Additional colors are available and may be subject to extra charges and longer lead times.Wilsonart is a registered trademark of Wilsonart International.
Max. OrderSeries # of Colors Mounting Ready for
Compts. Shipment
1540 25 35 All1040 25 35 All1030 25 35 All1080 25 18 All1090 25 4 *
*Overhead-Braced only.
10 WorkdaysAfter Receiptof ApprovedDrawings
Standard Plastic Laminate ColorsAll Wilsonart® color numbers
D354 Designer White 1573 Frosty White 1500 Grey D315 Platinum D73 Pewter D91 Slate Grey
1572 Antique White D30 Natural Almond 1530 Beige D97 Haze D337 Pebble D96 Shadow
D14 Port D29 Silverpine D482 Black Forest D321 Brittany Blue D25 Atlantis 1595 Black
4168 Grey Pampas 4607 Caldera Grey 4621 White Nebula 4142 Grey Glace 4622 Grey Nebula 4623 Graphite Nebula
4609 Caldera Rose 4608 Caldera Beige 4143 Neutral Glace 4669 Natural Tigris 4738 Ochre Roletta 1787 Oxide
4624 Beige Nebula 4632 Teal Nebula 4630 Cloud Nebula 4759 Mystique Marine 4552 Ebony Star
B-3888 CLASSIC SERIES MULTI-ROLL TOILETTISSUE DISPENSER Similar to B-4388, but
door has flat face with protruding tumbler lock.
ƒ
61/16"155mm
111/16"280mm
79/16"190mm
3/4"19mm
33/16"80mm
121/2"320mm
32 ƒ USA & Canada QuickShip model. ƒƒ USA QuickShip model.
*Model Capacity Finish Stainless
No. 1 Roll 2 Rolls Bright Satin SteelHoods
ƒB-667
B-6677
B-669
B-6697
ƒB-697
B-6977
B-699
B-6997
*Theft-Resistant Spindle (Part No. 283-604) available as replacement part for all models.
RecessedB-663 TOILETTISSUE
DISPENSER WITHSTORAGE SPACE FOREXTRA ROLL Brightpolished stainless steel.Chrome-plated plasticspindle holds rolls upto 5 1⁄8" (130mm) dia.(1500 sheets).Recessed mounting cabinet 3 15⁄16" (100mm) deepholds spare roll. Unit 6 1⁄4" W, 6 1⁄4" H (160 x160mm). Rough Wall Opening: 5 1⁄2" W, 5 1⁄2" H, 4"min. depth (140 x 140 x 102mm). Universal/Barrier-Free Mtg. Ht.: 22 1⁄8" (560mm) to top of unit. SeeBarrier-Free Washroom Guidelines on this page.
B-6637 Similar to B-663, but with satin finish.
Theft-Resistant Spindle (Part No. 283-604)available as replacement part for above models.
ƒ
TOIL
ET T
ISSU
E D
ISP
ENSER
S
BARRIER-FREE WASHROOM GUIDELINESTOILET TISSUE DISPENSERS. For universal access, roll-type dispensers without controlled delivery arepreferred. Folded-tissue dispensers are notrecommended because they require a finger-pinching action. Standard toilet tissue rolls shouldbe mounted with their forward edge no more than36" (915mm) from the back wall, their verticalcenterline 7" to 9" (180–230mm) in front of toiletseat, and their horizontal centerline at least 19"(485mm) above the finish floor.
B-667 B-697 B-699
61/16"155mm
111/16"280mm
79/16"190mm
3/4"19mm
33/16"80mm
121/2"320mm
ƒ
B-4388 CONTURA SERIES MULTI-ROLLTOILET TISSUE DISPENSER Satin-finish
stainless steel unit with stainless steel dispensingmechanism. Flush tumbler lock. Holds two rolls upto 5 1⁄4" (133mm) dia. (1800 sheets). Extra rollautomatically drops in place when bottom roll isdepleted. Theft-resistant, heavy-duty spindles.Extends 2 3⁄4" (70mm) from wall. Rough WallOpening: 6 1⁄4" W, 11 1⁄4" H, 3 1⁄4" min. depth(160 x 285 x 83mm). Av. Mtg. Ht.: 28 3⁄4"–36 3⁄4"(730–935mm) to top of unit; Barrier-Free, 28 3⁄4"(730mm). See Barrier-Free Washroom Guidelineson this page. Patented.
600 SERIES RECESSED TOILET TISSUEDISPENSERS
• Type 304 stainless steel with one-piece seamlessconstruction.
• Choice of finish: bright polished or satin.• Chrome-plated plastic spindles hold rolls up to 5 1⁄8"
(130mm) dia. (1500 sheets).• Choice of capacity: single-roll models measure 6 1⁄8" W
x 6 1⁄8" H (155 x 155mm); double-roll modelsmeasure 12 5⁄16" W x 6 1⁄8" H (315 x 155mm).
• Mounting: mounting clamps for securing to studwalls or countertop aprons.
• Rough Wall Openings: single-roll models require5 1⁄2" W x 5 1⁄4" H x 3 3⁄8" min. depth (140 x 135 x 85mm), double-roll models require 11 œ" W x5 1⁄4" H x 3 3⁄8" min. depth (300 x 135 x 85mm).
B-2888 CLASSICSERIES MULTI-ROLL
TOILET TISSUE DISPENSERSimilar to B-4288, but doorhas flat face with protrudingtumbler lock. See Barrier-Free Washroom Guidelineson this page.
B-4288 CONTURASERIES MULTI-ROLL
TOILET TISSUE DISPENSERSatin-finish stainless steelunit with stainless steeldispensing mechanism. Flushtumbler lock. Holds two rollsup to 5 1⁄4" (133mm) dia.(1800 sheets). Extra rollautomatically drops in placewhen bottom roll is depleted.Theft-resistant, heavy-dutyspindles. Unit 6 1⁄16" W, 11" H, 5 15⁄16" D (155 x280 x 150mm). Av. Mtg. Ht.: 28"–36"(710–915mm) to top of unit; Barrier-Free 28"(710mm). See Barrier-Free Washroom Guidelineson this page. Patented.
ƒ
ƒ
ƒ
Surface Mounted
Contura™ Series 1.8
TrimLine™ Series 1.5
Classic™ Series 1.0
Matrix™ Series 0.6
PRICE
INDEX
Note: Price index is a comparison of toilet accessories for a typical washroom of popularly specified products. Product mix may affect Price Index comparisons.
B-5288 MATRIXSERIES MULTI-ROLL
TOILET TISSUE DISPENSERDurable ABS plastic; greycolor. Two-roll dispensingmechanism for rolls up to5 œ" (145mm) dia. (2000sheets). Extra roll easily shiftsinto place when bottom roll isdepleted. Concealed lockingdevice. Unit 6 1⁄4" W, 13 1⁄2" H,6 7⁄8" D (160 x 345 x 175mm).Av. Mtg. Ht.: 28"–36" (710–915mm) to top of unit;Barrier-Free 28" (710mm). SeeBarrier-Free Washroom Guidelineson this page. Patented.
ƒ B-2892 CLASSIC SERIES TWIN JUMBO-ROLL TOILET TISSUE DISPENSER Satin-
finish stainless steel. Equipped with tumbler lock.Spindles hold two 10" (255mm) dia. rolls with2 1⁄4" (55mm) dia. core rolls; convertible for 3"(75mm) dia. core rolls. Sliding access panelexposes one roll at a time, allows easy rollchange-over. Wide viewing slot in door. Quickreloading. Unit 20 13⁄16" W, 11 3⁄8" H, 5 5⁄16" D (530x 290 x 135mm). Universal/Barrier-Free Mtg. Ht.:30" (760mm) to top of unit. See Barrier-FreeWashroom Guidelines on this page. Patented.
33
B-2840 TOILET TISSUE DISPENSER WITHSHELF Satin-finish stainless steel. Shelf has
1⁄2" (13mm) returns, hemmed front edge. Chrome-plated plastic spindles hold rolls up to 5 1⁄2"(140mm) dia. (1800 sheets). Unit 16" W, 4" H, 5" D(405 x 100 x 125mm). Universal/Barrier-Free Mtg.Ht.: 22" (560mm) to top of unit. See Barrier-FreeWashroom Guidelines on page 32.
Theft-Resistant Spindle (Part No. 283-604)available as replacement part for above model.
B-27460 TOILET TISSUE DISPENSER FORTWO ROLLS Vandal-resistant unit: heavy-duty
cast aluminum, satin-finish. Tumbler lock securesspindles in place. High-impact plastic spindles holdrolls up to 6" (150mm) dia. (2000 sheets). Unit14 1⁄8" (360mm) wide, projects 5 1⁄4" (135mm) fromwall. No controlled delivery. Universal/Barrier-FreeMtg. Ht.: 20 1⁄8" (510mm) to top of unit. See Barrier-Free Washroom Guidelines on page 32. Patented.B-2746 Similar to B-27460, with controlled delivery.Patented.
ƒƒ
ƒ
ƒ
ƒ
ƒ
ƒƒ
B-264 CLASSIC SERIES TOILET TISSUEDISPENSER FOR SINGLE ROLL Bright polishedchrome-plated steel. Vandal-resistant, self-lockingmechanism. Controlled delivery. Toilet tissue rollwill not spin freely. Eliminates waste. Accomodatesone standard-core toilet tissue roll up to 4 1⁄2"(115mm) diameter. Roll cannot be removed fromdispenser until empty. Unit 6" W, 2 3⁄4" H (150 x70mm); projects 4 1⁄4" (110mm) from wall.
B-265 CLASSIC SERIES TOILET TISSUEDISPENSER FOR TWO ROLLS Similar to B-264,Unit 12 1⁄4" W, 2 3⁄4" H (310 x 70mm), projects4 1⁄4" (110mm) from wall.
B-272 TOILET TISSUE CABINETSatin-finish stainless steel. Equippedwith tumbler lock; vandal-resistant.Dispenses either single- or doublefoldtoilet tissue. Large capacity: 1330singlefold tissues. Slots in cabinetindicate refill time. May be refilled with full standard pack beforedispenser is empty. Unit 5" W,8 15⁄16" H, 3" D (125 x 225 x 710mm).
B-7686
B-7685
ƒ 283-604 THEFT-RESISTANT SPINDLEMolded plastic spindle with concealed lockingfeature is available as an option for Bobrick surface-mounted and recessed toilet tissue dispenserswhere noted. After rolls are depleted, spindle isremoved with special key furnished; theft-resistant.Patented. Theft-resistant spindle may be ordered asa replacement part.
B-7685 CLASSIC SERIES TOILET TISSUEDISPENSER FOR SINGLE ROLL Bright
polished stainless steel. Support-arm flanges lockto concealed stainless steel wall plate. Chrome-plated plastic spindle holds rolls up to 5 1⁄2"(140mm) dia. (1800 sheets). Unit 7 1⁄4" W, 2" H(185 x 50mm); projects 3 15⁄16" (100mm) from wall.Universal/Barrier-Free Mtg. Ht.: 20" (510mm) totop of unit. See Barrier-Free Washroom Guidelineson page 32.
B-76857 Similar to B-7685, but with satin finish.
B-685 TOILET TISSUE DISPENSER FORSINGLE ROLL Bright polished stainless steel.
Support-arm flanges lock to concealed stainlesssteel wall plate. Chrome-plated plastic spindle holdsrolls up to 5 1⁄2 (140mm) dia. (1800 sheets). Unit7 1⁄4" W, 2" H (185 x 50mm); projects 3 15⁄16"(100mm) from wall.
B-6857 Similar to B-685, but with satin finish.
B-7686 CLASSIC SERIES TOILET TISSUEDISPENSER FOR TWO ROLLS Bright
polished finish. Unit 12 1⁄2" W, 2" H (320 x 50mm);projects 3 15⁄16" (100mm) from wall.
B-76867 Similar to B-7686, but with satin finish.
B-686 TOILET TISSUE DISPENSER FORTWO ROLLS Bright polished finish. Unit
12 1⁄2" W, 2" H (320 x 50mm); projects 3 15⁄16"(100mm) from wall.
B-6867 Similar to B-686, but with satin finish.
Theft-Resistant Spindle (Part No. 283-604)available as replacement part for above models.
B-6699 TOILETTISSUE
DISPENSER WITHHOOD FOR SINGLEROLL Bright polishedstainless steel. Hoodprotects paper.Chrome-plated plasticspindle holds rollsup to 5 1⁄8" (130mm)dia. (1500 sheets).Unit 6 3⁄16" W, 6 3⁄16" H (155 x 155mm); hood projects 4 3⁄4" (120mm) fromwall with full roll in place. Universal/Barrier-Free Mtg.Ht.: 22" (560mm) to top of unit. See Barrier-FreeWashroom Guidelines on page 32.
B-66997 Similar to B-6699, but with satin finish.
B-6999 TOILET TISSUE DISPENSER WITHHOODS FOR TWO ROLLS Bright polished
finish. Unit 12 3⁄8" W, 6 3⁄16" H (315 x 155mm); hoodsproject 4 3⁄4" (120mm) from wall with full roll in place.
B-69997 Similar to B-6999, but with satin finish.
Theft-Resistant Spindle (Part No. 283-604) availableas replacement part for above models.
B-6699
ƒƒ
TOILET TIS
SU
E DIS
PEN
SER
S
B -2740
B-2730
B-2840
ƒ
ƒƒ
ƒ
ƒƒ
B-2740 CLASSIC SERIES TOILET TISSUEDISPENSER FOR TWO ROLLS Heavy-duty
cast aluminum, satin finish. High-impact plasticspindles have concealed locking device; theft-resistant. Holds two rolls up to 6" (150mm) dia.(2000 sheets). Unit 12 1⁄2" (320mm) wide, projects4 7⁄8" (125mm) from wall. No controlled delivery.Universal/Barrier-Free Mtg. Ht.: 19 3⁄4" (500mm) totop of unit. See Barrier-Free Washroom Guidelineson page 32.
B-274 Similar to B-2740, with controlled delivery.
B-2730 TOILET TISSUE DISPENSER FORSINGLE ROLL Unit 6 1⁄2" (165mm) wide,
projects 4 7⁄8" (125mm) from wall. No controlleddelivery.
B-273 Similar to B-2730, with controlled delivery.
NEW
B-2890 SINGLE JUMBO-ROLL TOILETTISSUE DISPENSER Satin finish stainless
steel. Equipped with spring lock. Spindle holdsone 10" (255mm) dia. roll with 3" (75mm) dia.core. Convertible for 2 11⁄16" (70mm) and 1 5⁄8"(40mm) dia. core rolls. Powder-coated mountingplate. Slot in door reveals tissue supply. Unit10 5⁄8" W, 10 5⁄8" H, 4 1⁄2" D (270 x 270 x115mm). Universal/Barrier-Free Mtg. Ht.: 29 1⁄2"(750mm) to top of unit. See Barrier-Free Wash-room Guidelines on page 32.
B-52891 MATRIXSERIES JUMBO-
ROLL TOILET TISSUEDISPENSER DurableABS plastic; grey color.Spindle holds one 10"(255mm) dia. roll with3" (75mm) dia. core;convertible in field tohold 2 1⁄4" (55mm) dia.
core roll. Concealed locking device. Viewing slotin door. Unit 10 3⁄4" W, 12 9⁄16" H, 5 1⁄4" D (275 x320 x 135mm). Universal/Barrier-Free Mtg. Ht.:31" (785mm) to top of unit. See Barrier-FreeWashroom Guidelines on page 32. Patented.
ƒƒ
ƒ
34 ƒ USA & Canada QuickShip model. ƒƒ USA QuickShip model.
B-4353 CONTURA SERIES SANITARY NAPKIN DISPOSAL Satin-finish stainless
steel. Self-closing door pulls down for access todisposal. Furnished with removable, leak-proof,1.2-gal. (4.6-L) plastic receptacle. Rough WallOpening: 11 1⁄4" W, 9 1⁄2" H, 4" min. depth (285x 240 x 102mm). Universal/Barrier-Free Mtg. Ht.:31" (785mm) to top of unit. Patented.
B-35303 TRIMLINE SERIES SANITARYNAPKIN DISPOSAL Satin-finish stainless
steel. Door has 90° return, conceals flange. Self-closing panel covers disposal opening. Removable,leak-proof, 1.2-gal. (4.6-L) plastic receptacle. Rough Wall Opening: 11 1⁄2" W, 17 1⁄4" H, 3 3⁄4" min.depth (290 x 440 x 95mm). Universal/Barrier-Free Mtg.Ht.: 31" (785mm) to top of unit.
B-3513 TRIMLINE SERIES SANITARYNAPKIN DISPOSAL Satin-finish stainless
steel. Door has 90° return, conceals flange. Doorpulls down to open. Removable, leak-proof, 0.6-gal(2.3-L) plastic receptacle. Rough Wall Opening:6" W, 12" H, 3 3⁄4" min. depth (150 x 305 x95mm). Universal/Barrier-Free Mtg. Ht.: 31"(785mm) to top of unit.
Recessed
8"205mm
9/16"14mm
35/8"90mm
141/16"355mm
113/4"300mm
53/4"145mm
B-357 CLASSIC SERIESSEAT-COVER DISPENSER,SANITARY NAPKINDISPOSAL AND TOILETTISSUE DISPENSERMounts centered throughtoilet partition. Used fromboth sides, serviced fromone side. Capacity: 0.8-gal.(3.0-L). Holds 1000 toiletseat covers and four rollsof tissue, two for each com-partment. Theft-resistantspindles. Rough Partition Opening: 15 1⁄2" W, 28 7⁄8" H (395 x 735mm).Av. Mtg. Ht.: 60" (1525mm) to top of unit.
B-3571 Similar to B-357, but one sidemounts flush against partition of Barrier-Free
compartment to allow clearance for grab bar. Universal/Barrier-Free Mtg. Ht.: 43 1⁄4" (1100mm)to top of unit.
B-3574 Similar to B-3571, but for recessedinstallation in side wall of single
compartment. Rough Wall Opening: 16" W,29 1⁄4" H, 4" min. depth (405 x 745 x 102mm).Av. Mtg. Ht.: 60" (1525mm) to top of unit; Barrier-Free, 43 1⁄4" (1100mm).
B-3579 Similar to B-3574, but with stainless steel skirt for surface mounting. Av. Mtg. Ht.: 60"(1525mm) to top of unit.
B-3471 CLASSICSERIES SEAT-COVER
DISPENSER AND TOILETTISSUE DISPENSER One sidemounts flush against partitionof Barrier-Free compartment toallow clearance for grab bar.Used from both sides, servicedfrom one side. Holds 1000toilet seat covers and fourrolls of tissue, two for eachcompartment. Theft-resistantspindles. Rough PartitionOpening: 15 1⁄2" W, 28 7⁄8" H(395 x 735mm). Universal/Barrier-Free Mtg. Ht.:43 1⁄4" (1100mm) to top of unit.
B-347 Similar to B-3471, but mounts centeredthrough toilet partition. Av. Mtg. Ht.: 60" (1525mm)to top of unit.
B-3474 Similar to B-3471, but for recessedinstallation in side wall of single compartment.
Rough Wall Opening: 16" W, 29 1⁄4" H, 4" min.depth (405 x 745 x 102mm). Av. Mtg. Ht.: 60"(1525mm) to top of unit; Barrier-Free, 43 1⁄4"(1100mm).
B-3479 Similar to B-3474, but with stainless steelskirt for surface mounting. Av. Mtg. Ht.: 60"(1525mm) to top of unit.
Dimensionstypical for all partition-mountedmodels withtoilet-seat-coverdispensers.
• Partition Mounted Models B-347, B-3471, B-357,B-3571 mount through partitions 1⁄2" to 2"(13–51mm) thick, serving two compartments.
• Models B-3471, B-3474, B-3571, B-3574 meetBarrier-Free accessibility guidelines.
• Toilet tissue dispensers accommodate 5 1⁄4"(135mm) diameter, 1800-sheet rolls.
• Flanges are one-piece seamless, doors securedwith full-length stainless steel hinges, and tumblerlocks keyed like other Bobrick models.
• Constructed of type 304 stainless steel throughoutwith satin finish on all exposed surfaces; weldedconstruction.
• Theft-resistant spindles included.
DESIGNER’S NOTES1. Partition-mounted units B-3471, B-3571 with
one side flush to partition of Barrier-Freecompartment have toilet tissue on left whenfacing unit.
2. Recessed units B-3474, B-3574 and surface-mounted units B-3479, B-3579 have toilettissue on right when facing unit.
3. Rear edge of partition cutout should be 20 1⁄2"(520mm) from back wall. This will locate toilettissue within 12" (305mm) of front of a standard
toilet that projects 30" (760mm) from back wall.4. Cutouts in partitions for accessories can be pre-
cut at factory if location and size of cutouts arespecified and orders for both partitions andaccessories are received together.
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
TOIL
ET T
ISSU
E &
SEA
T C
OVER
DIS
PEN
SER
S/N
AP
KIN
DIS
PO
SA
LSPartition Mounted
B-357 B-3471
Contura™ Series 1.8
TrimLine™ Series 1.5
Classic™ Series 1.0
Matrix™ Series 0.6
PRICE
INDEX
Note: Price index is a comparison of toilet accessories for a typical washroom of popularly specified products. Product mix may affect Price Index comparisons.
ƒ
ƒ
BARRIER-FREE WASHROOM GUIDELINESIt is critical to consult state and local jurisdictionsand accessibility codes to confirm compliance ofhorizontal and vertical mounting locations ofindividual and combination accessories withintoilet compartments, including toilet tissuedispensers, toilet seat cover dispensers, sanitarynapkin disposals and grab bars.
DESIGNER’S NOTEWhen combination units are mounted in anaccessible toilet compartment through the sharedtoilet partition panel, the unit’s location in theadjoining toilet compartment must permit theunit’s complete operation, and allow for the unit’sdoor to swing clear of the toilet when custodiansservice the unit.
35
B-3094 CLASSIC SERIES SANITARY NAPKINDISPOSAL AND TOILET TISSUE DISPENSER
Satin-finish stainless steel. Disposal door is self-closing. Receptacle retained in cabinet by tumblerlock. Capacity: 3⁄4-gal. (2.8-L). Holds two rolls up to5 1⁄4" (135mm) dia. (1800 sheets). Rough WallOpening: 15 5⁄8" W, 11 1⁄4" H, 4" min. depth (395 x285 x 102mm). Universal/Barrier-Free Mtg. Ht.: 30"(760mm) to top of unit.Theft-Resistant Spindle (Part No. 283-604) availableas replacement part for above model. See page 33.
B-5270 MATRIXSERIES SANITARY
NAPKIN DISPOSALDurable ABS plastic; greycolor. Lid features fingertiphandles for easy access.Unit 9 1⁄4" W, 11 3⁄8" H,3 7⁄8" D (235 x 290 x100mm). Universal/Barrier-Free Mtg. Ht.:25–30" (635–760mm)to top of unit. Patented.
B-4221CONTURA
SERIES SEAT-COVERDISPENSER Satin-finish stainless steel.Dispenses 250 single-or half-fold toilet seatcovers. Fills frombottom. Unit 15 3⁄4" W,11 1⁄4" H, 2 1⁄16" D (400 x 285 x 55mm). Av. Mtg.Ht.: 45"–49" (1145–1500mm) to top of unit,Barrier-Free, 30–45" (760–1145mm). Patented.
B-221 CLASSICSERIES SEAT-
COVER DISPENSERSatin-finish stainlesssteel. Dispenses 250single- or half-foldtoilet seat covers.Fills from bottom. Unit15 3⁄4" W, 11" H, 2" D (400 x 280 x 50mm).Av. Mtg. Ht.: 45–49" (1145–1500mm) to topof unit, Barrier-Free, 30–45" (760–1145mm).
B-3013 TRIMLINE SERIES SEAT-COVERDISPENSER Satin-finish stainless steel. Door
has 90° return, conceals flange. Dispenses500 toilet seat covers. Rough Wall Opening:15 5⁄8" W, 11 1⁄4" H, 2 3⁄4" min. depth (395 x 285 x70mm). Av. Mtg. Ht.: 60" (1525mm) to top of unit;Barrier-Free, 49" (1245mm).
B-301 CLASSIC SERIES SEAT-COVERDISPENSER Satin-finish stainless steel.
Seamless beveled flange. Dispenses 500 toiletseat covers. Rough Wall Opening: 15 5⁄8" W, 11 " H,2 5⁄8" min. depth (395 x 285 x 67mm). Av. Mtg. Ht.:60" (1525mm) to top of unit; Barrier-Free, 49"(1245mm).
B-353 CLASSIC SERIES SANITARY NAPKINDISPOSAL Satin-finish stainless steel.
Seamless beveled flange. Door has tumbler lock.Self-closing panel covers disposal opening.Removable, leak-proof, 1.2-gal. (4.6-L) plasticreceptacle. Rough Wall Opening: 11 1⁄4" W, 15 5⁄8" H,4" min. depth (285 x 395 x 102mm). Universal/Barrier-Free Mtg. Ht.: 31" (785mm) to top of unit.
Surface Mounted
ƒƒ
B-270 CONTURASERIES SANITARY
NAPKIN DISPOSAL Satin-finish stainless steel.Cover is drawn, one-piececonstruction; securedto cabinet with full-lengthstainless steel piano-hinge.Unit 7 1⁄2" W, 10" H,3 13⁄16" D (190 x 255 x 95mm). Universal/Barrier-Free Mtg. Ht.: 25–30" (635–760mm) to top of unit.Patented.
ƒƒ
ƒ
ƒƒ
ƒ
ƒ
"153/16385mm
123/4"325mm
10275mm
4"100mm 173/16"
435mm1"25mm
3/4"
TOILET TIS
SU
E & S
EAT C
OVER
DIS
PEN
SER
S/N
AP
KIN
DIS
PO
SA
LS
B -254 CLASSICSERIES SANITARY
NAPKIN DISPOSAL Satin-finish stainless steel. Doorhas tumbler lock. Self-closing panel coversdisposal opening.Removable, leak-proof,1.2-gal. (4.6-L) plastic receptacle. Unit 10 11⁄16" W,15 1⁄8" H, 4 1⁄16" D (270 x385 x 105mm). Universal/Barrier-Free Mtg. Ht.: 30" (760mm) to top of unit.
1013/16"275mm
151/4"385mm173/16"
435mm
123/4"325mm
1"25mm
Top viewAdjustable flange
Fixed flange
1/2"13mm
to 11/4"32mm
Mtg. Thickness
41/16"105mm
B-4354 CONTURA™ SERIES SANITARYNAPKIN DISPOSAL Satin-finish stainless
steel. Mounts in toilet partition 1⁄2–1 1⁄4"(13–32mm) thick. Self-closing doors pull down withless than 5 lb of force (22.2 N) for access todisposal. Removable, leak-proof, 0.7-gal. (2.7-L)plastic receptacle. Rough Partition Opening:11" W, 9 3⁄8" H (280 x 240mm). Universal/Barrier-Free Mtg. Ht.: 31" (785mm) to top of unit.Patented.
B-354 CLASSIC SERIES SANITARY NAPKINDISPOSAL Satin-finish stainless steel.
Mounts in partitions 1⁄2–1 1⁄4" (13–32mm) thick.Self-closing panels cover openings. Removable,leakproof, 1.2-gal. (4.6-L) plastic receptacle.Rough Partition Opening: 11" W, 15 1⁄2" H (280 x395mm). Universal/Barrier-Free Mtg. Ht.: 31"(785mm) to top of unit.
ƒƒ
123/4"325mm
11"280mm91/8"
230mm
107/8"275mm
Top view1/2"13mm
to 11/4"32mmmtg. thickness 11/2"
38mm
ƒ
ƒ
Recessed Partition Mounted
ƒƒ B-5221MATRIX
SERIES SEAT-COVERDISPENSER DurableABS plastic; greycolor. Dispenses 250single- or half-foldtoilet seat covers.Fills from bottom. Unit 16 1⁄8" W, 11 1⁄2" H, 2 1⁄2" D(410 x 290 x 65mm). Av. Mtg. Ht.: 45–49"(1145–1500mm) to top of unit, Barrier-Free,30–45" (760–1145mm). Patented.
DISPOSABLE PAPER LINERS, 1000 PER CASE
Order ForPart No.: Model No.:
270-12 B-270, B-52703094-12 B-3094353-12 B-254, B-353, B-35303, B-354,
B-357, B-3571, B-3574, B-3579, B-4353, B-4354
36 ƒ USA & Canada QuickShip model. ƒƒ USA QuickShip model.
CONCEALED MOUNTING WITH SNAP FLANGE
• Cover snaps over mounting flangeto conceal screws.
• Concealed mounting flange1⁄8" (3mm) thick, type 304stainless steel plate, 2" Wx 3 1⁄8" H (50 x 80mm), withscrew holes for concealedanchors.
• Cover is 22-gauge (0.8mm), type 304 stainless steel with satin finish, 3 1⁄4" (85mm) diameter.
EXPOSED MOUNTING
• Flange 1⁄8" (3mm) thick, type 304stainless steel plate, 3" (75mm)diameter.
• Exposed mounting screw holes;vandal-resistant screws availableas an optional accessory.
Series Diameter *Finish
*B-6806 1 1⁄2" (38mm) Satin Finish*B-5806 1 1⁄4" (32mm) Satin Finish
*Peened nonslip gripping surface available. Addsuffix .99 to model number.
Series Diameter *Finish
*B-6106 1 1⁄2" (38mm) Satin Finish*B-490 1 1⁄4" (32mm) Satin Finish
*Peened nonslip gripping surface available. Addsuffix .99 to model number.
INSTALL GRAB BARS WITHOUT BACKING. NO NEED TO OPEN AND RECONSTRUCT WALLS.
WingIt™ Grab Bar Fastening System securesall Bobrick Grab Bar Series. For walls with a
minimum of 5⁄8" (16mm) thick painted or tileddrywall. Can also be used on 1⁄2" (13mm) thickdrywall with added finished wall material. Thefastener will support 300 lb. load exceeding allbuilding code and governmental agency guidelinesincluding ADAAG in the United States.
ƒ251-4 WINGIT™ GRAB BAR FASTENER For 2 1⁄2"and 3 1⁄2" (65 and 90mm) or deeper hollow wallswith finished wall surfaces 1⁄4" to 1 1⁄2" (6 to 38mm)thick. One fastener required for each flange.Corrosion-resistant stainless steel. Patented.WingIt™ is a trademark of WingIt Innovations, LLC.
Clearance betweenwall and grab bar
BARRIER-FREE WASHROOM GUIDELINES GRAB BARS. Diameter of grab bars should be 1 1⁄4" to 1 1⁄2" (32–38mm) with 1 1⁄2" (38mm) clearance fromthe wall. Grab bars should not rotate in their fittings. The required mounting height is universally 33" to 36"(840–915mm) from the centerline of the grab bar to the finish floor. The structural strength of all grab barsand their mounting devices should withstand more than 250 pounds of force (1112 N). For all Barrier-Freetoilet compartments, individual toilet rooms and guest bathrooms, it is recommended that a 36" (915mm)min. horizontal grab bar be installed on the back wall over the toilet and a 42" (1065mm) min. horizontalgrab bar be installed on the side wall or partition nearest the toilet. This can also be accomplished with asingle horizontal two-wall grab bar.
Grab Bars Comply With Barrier-Free Design Codes
• Constructed of satin-finish stainless steel tubing in1 1⁄4" and 1 1⁄2" (32 and 38mm) diameters;concealed or exposed mounting.
• Peened nonslip gripping surface available on allSeries. Add suffix .99 to model number.
• Bar 18-gauge (1.2mm), type 304 stainless steel.• Bar passes through flange and is heliarc welded to
form single structural unit.
• Comply with structural strength requirements: grab bars that provide 1 1⁄2" (38mm) clearancefrom the wall can support loads in excess of 900pounds (408kg) when properly installed, meetingADA Accessibility Guidelines in U.S.A.
• Mandrel bending process ensures uniform bardiameter around curves.
• All joints and supports are contour cut and welded.• Concealed anchors and fasteners available as an
optional accessory.
DESIGNER'S NOTEAny grab bar configuration not included within aSeries in the Grab Bar Configuration Chart on page37 is available on special order.
GR
AB
BA
RS
1å"
38mm
ƒ
37
GR
AB
BA
RS
†OPTIONAL MOUNTING KITS. Order one per flange. Part No. 252-30 (3) sheet-metal screws; 2521-30 (3) machine screws with toggle nuts; 2522-30 (3) machine screws with expansionshields. †OPTIONAL ANCHOR DEVICES. Part No. 2562 concealed anchor plates for stud walls (order one per pair of flanges); and 2573 concealed anchors for solid walls (order one perflange); 2581 and 2583 anchors for œ" to 1" (19–25mm) panels (order one per flange)
Grab Bar Configurations
ƒƒB-6861
B-6861.99
ƒƒB-68137
B-68137.99
ƒƒB-5837
B-5837.99
ƒƒB-4998
ƒƒB-4998.99
ƒƒ252-30
ƒƒ2521-30
ƒƒ2522-30
2562
2573
2583
ƒƒ252-30
ƒƒ2521-30
ƒƒ2522-30
2562
2573
2583
ƒƒ252-30
ƒƒ2521-30
ƒƒ2522-30
2581
Straight 24" W x 36" D(61 x 91cm) Grab Bar forTub/Shower/
ToiletCompartment
15 7⁄8" W x 30 7⁄8" D(40 x 78cm)Grab Bar for 36" x 36"
(91 x 91cm)Shower Stall
36" W x 54" D (91 x 137cm)
Grab Bar for ToiletCompartment/ Tub/Shower
29" (74cm)Swing Up
(Wall Mounted)Patented
†OPTIONAL
MOUNTING DEVICES
Order for each Series using part numbers listed. See descriptions below.
GRAB BAR
CONFIGURATIONS
CONCEALED
MOUNTING
B-6806 SERIES
1 1⁄ 2" (38mm) dia.
satin finish or
peened grip
snap-flange
CONCEALED
MOUNTING
B-5806 SERIES
1 1⁄4" (32mm) dia.
satin finish or
peened grip
snap-flange
EXPOSED
MOUNTING
B-6106 SERIES
1 1⁄ 2" (38mm) dia.
satin finish or
peened grip
EXPOSED
MOUNTING
B-490 SERIES
1 1⁄4" (32mm) dia.
satin finish or
peened grip
B-6806 x
12", ƒƒ18", ƒ24",
ƒƒ30", ƒƒ36",
ƒƒ42", ƒƒ48"
(305, 455, 610,
760, 915, 1065,
1220mm)
B-6806.99 x18", ƒ24", ƒƒ30",
ƒƒ36", ƒƒ42",ƒƒ48"
(455, 610, 760,915, 1065,1220mm)
B-5806 x
12", 18", ƒ24",
30", ƒƒ36", ƒƒ42",
ƒƒ48"
(305, 455, 610,
760, 915, 1065,
1220mm)
B-5806.99 x12", 18", ƒ24",
30", ƒ36", ƒƒ42",48"
(305, 455, 610,760, 915, 1065,
1220mm)
B-6106 x
24", 36", 42",
48" (610, 915,
1065, 1220mm)
B-6106.99 x24", 36", 42"
(610, 915,1065mm)
B-68616
B-68616.99
B-58616
B-58616.99
38
BA
THR
OO
M A
CC
ESSO
RIE
S
B -7671Bright polished stainless steel
B-76717Satin-finish stainless steel
To specify bright polished stainless steel, use model number shown in catalog. To specify satin-finish stainlesssteel, add suffix 7 to model number shown. Examples: For B-7671 Single Robe Hook in bright polishedstainless steel, specify B-7671; for Single Robe Hook in satin-finish stainless steel, specify B-76717.
Bobrick 7600 Classic™ Series Accessories
CONCEALED MOUNTING BRACKETUnique 2-piece mounting system. Concealedmounting bracket of 18-gauge (1.2mm) stainlesssteel, welded inside each flange, mounts on19-gauge (1.0mm) stainless steel wall plate.Includes a stainless steel locking setscrew onbottom.
• Selection of design-integrated accessories andfinishes assist the specifier for all lodging types.
• Smooth, easy-to-clean gap-free design.
• Unique mounting system supports upward anddownward force.
• All accessories type 304 stainless steel.
• Available in two finishes: satin or bright polishedstainless steel.
• Durable all-welded construction.
B-7680 CLASSIC SERIES SOAP DISH Drawn, one-piece soap dish welded to support arm and flange.Two ridges to support bar of soap and two drain holes.Bright polished stainless steel. Unit 4 1⁄4" W, 2" H(110 x 50mm); projects 4 1⁄8" (105mm) from wall.
B-76807 Similar to B-7680, but with satin finish.
B-680 SOAP DISH Similar to B-7680, but unit4 1⁄2" W, 2" H (115 x 50mm); projects 3 3⁄8" (85mm)from wall.
B-6807 Similar to B-680, but with satin finish.
Surface Mounted
B-7679 CLASSIC SERIES TOOTHBRUSH ANDTUMBLER HOLDER Drawn, one-piece holder weldedto support arm and flange. 2 3⁄8" (60mm) diameterhole in center of unit to hold tumbler. Accommodatessix toothbrushes, three on each side. Bright polishedstainless steel. Unit 4 1⁄4" W, 2" H (110 x 50mm);projects 4 1⁄8" (105mm) from wall.
B-76797 Similar to B-7679, but with satin finish.
B-679 TOOTHBRUSH AND TUMBLER HOLDERSimilar to B-7679, but with 2 1⁄4" (55mm) diameterhole in center of unit to hold tumbler. Accommo-dates four toothbrushes, two on each side. Unit4 1⁄2" W, 2" H (115 x 50mm); projects 3 3⁄8" (85mm)from wall.
39
B-681 SOAP DISH AND BAR Drawn, one-piecesoap dish welded to support arm and flange. Tworidges to support bar of soap and two drain holes.3⁄4" (19mm) square bar 8 1⁄2" (215mm) long. Bright polished stainless steel. Unit 12" W, 2" H (305 x 50mm); projects 3 3⁄8" (85mm) from wall.
B-683 TOILETRY SHELF Bright polished stainlesssteel. 24" length (610mm). Shelf 4 3⁄4" (120mm)wide, projects 5 5⁄8" (145mm) from wall. Edges areroll-formed for safety.
DESIGNER’S NOTESA complete selection of recessed and surface-mounted, single- and double-roll, stainless steeltoilet tissue dispensers is shown on pages 32and 33.
For added safety in hospital and hotel bathrooms,grab bars are recommended for use as towel bars.
BARRIER-FREE BATHROOM GUIDELINESIt is recommended that surface-mounted bathroomaccessories be mounted 38" to 48" (965–1220mm)above the finish floor. Soap Dishes should beplaced on the same wall as the shower head andcontrols where they are least likely to collectstanding water. Over bathtubs, Soap Dishesshould be mounted between the grab bar and therim of bathtubs.
B-205 HEAVY-DUTY TOWEL BAR 1" (25mm) dia.bar is 20-gauge (0.9mm), type 304 stainless steel,satin finish. Support posts are heavy brass withsatin chrome finish. Flanges are 2 3⁄4" (70mm)diameter. Withstands more than 250-lb (113-kg)downward pull when properly installed. Bar cannotturn in posts. Available in 18" and 24" lengths(455, 610mm).
B-530 EXTRA-HEAVY-DUTY TOWEL BARFor use in hospital and hotel bathrooms. 1"
(25mm) diameter bar is 18-gauge (1.2mm), type304 stainless steel, satin finish. Concealedmounting with snap flange. Withstands 900-lb(408-kg) downward pull when properly installed.Available in 18" and 24" Lengths (455, 610mm).
B-7674 CLASSIC SERIES TOWEL BAR Round œ" (19mm) diameter towel bar. Bright polishedstainless steel. Available in 18" and 24" lengths(455, 610mm). Projects 3 1⁄4" (85mm) from wall.
B-76747 Similar to B-7674, but with satin finish.
B-674 TOWEL BAR Similar to B-7674. Available in18" and 24" lengths (455, 610mm).
B-6747 Similar to B-674, but with satin finish. 24"length (610mm).
B-7673 CLASSIC SERIES TOWEL BAR 3⁄4" (19mm)square towel bar. Bright polished stainless steel.Available in 18" and 24" lengths (455, 610mm).Projects 3 1⁄4" (85mm) from wall.
B-76737 Similar to B-7673, but with satin finish.
B-673 TOWEL BAR Similar to B-7673. Available in18" and 24" lengths (455, 610mm).
B-6737 Similar to B-673, but with satin finish. 24"length (610mm).
B-550 EXTRA-HEAVY-DUTY TOWEL BAR1 1⁄4" (30mm) dia. bar has peened grip with
bright polished ends and flanges. 18-gauge(1.2mm), type 304 stainless steel. Concealedmounting with snap flange. Withstands 900-lb(408-kg) downward pull when properly installed.Available in 24", 30", 36", and 42" (610, 760,915, 1065mm) lengths.
B-687 DOOR BUMPER Flange is 2" x 2" (50 x50mm). Bright polished stainless steel. Black nylonpost with black neoprene bumper. Projects 2 1⁄8" (55mm) from wall.
BA
THR
OO
M A
CC
ESSO
RIESB -7676 CLASSIC SERIES TOWEL SHELF WITH
TOWEL BAR Shelf 6 1⁄4" (160mm) wide, consists offour 3⁄8" (10mm) round tubes mounted in supportarms. 1⁄4" (6mm) round towel bar below shelf. Brightpolished stainless steel. 24" length (610mm). Overallheight is 4 1⁄4" (110mm). Projects 8 1⁄4" (210mm)from wall.
B-76767 Similar to B-7676, but with satin finish.
B-676 TOWEL SHELF WITH TOWEL BAR Similarto B-7676. Shelf 6 1⁄4" (160mm) wide, consists offour 5⁄16" (8mm) square tubes firmly mounted insupport arms. 5⁄16" (8mm) square towel bar belowshelf. 24" length (610mm). Projects 8 1⁄2" (215mm)from wall.
PRICEINDEX
600 Series 2.67600 Series 1.0
B-973 VANDAL-RESISTANT SOAP DISH Extra-heavy, chrome-plated cast bronze. Bright polishedfinish. All edges are rounded for safety. Furnishedwith tamper-resistant mounting screws. Unit 5" W,1 3⁄8" H, 3" D (125 x 45 x 75mm).
40 ƒ USA & Canada QuickShip model. ƒƒ USA QuickShip model.
BARRIER-FREE BATHROOM GUIDELINES
MEDICINE CABINETS. Units should be mounted so the bottom edge of the reflective surface is no higherthan 40" (1015mm) above the finish floor and at least one accessible shelf is no higher than 44" (1120mm)above the finish floor.
SOAP DISHES. It is recommended that soap dishes in all bathing facilities be recessed and placed on thesame wall as the shower head and controls where they are least likely to collect standing water. It isrecommended that they be mounted 38" to 48" (965–1220mm) above the finish floor, or they should bemounted between the grab bar and the rim of bathtubs.
SHOWER CURTAINS. All types of shower installations designed for wheelchair users are generally moreaccessible when shower curtains are used as enclosures. If other types of enclosures are used, theyshould fold back completely out of the way so as not to obstruct transfer to shower seats or interfere withcontrols, and they should not incorporate a track along the rim of bathtubs.
GRAB BARS. All accessible bathing facilities require grab bars installed to meet ADAAG specifications. Diameter of grab bars should be 1 1⁄4" to 1 1⁄2" (32–38mm) with 1 1⁄2" (38mm) clearance from the wall. Grab bars should not rotate in their fittings. The required mounting height is universally 33" to 36"(840–915mm) from the centerline of the grab bar to the finish floor. Structural strength of grab bars andtheir mounting devices should withstand more than 250 pounds of force (1112 N).
SHOWER SEATS. L-shaped folding shower seats are required in accessible 36" x 36" (915 x 915mm)shower stalls. They should be mounted on the wall opposite controls with top surface of seat 17" to 19"(430–485mm) above the finish floor. Seat should have no more than 1 1⁄2" (38mm) clearance from wallsand should extend the depth of shower stall, allowing space for shower curtain at front of stall. Widesection of L-shaped seat should project no more than 23" (585mm) from wall; the narrow section, no morethan 16" (405mm) from wall. If shower seat is provided in 30" x 60" (760 x 1525mm) min. shower stall, itshould be folding type and mounted on the wall adjacent to controls. Structural strength of shower seatsand their mounting devices should withstand more than 250 pounds of force (1112 N).
B-8397 SURFACE-MOUNTED FACIAL TISSUEDISPENSER Cabinet type 304 stainless steel,satin finish. Equipped with concealed locking device;opens with key provided. Concealed wall plate is22-gauge (0.8mm), type 304 stainless steel.Dispenses one pack of 100 two-ply facial tissues.Unit 10 1⁄4" W, 5 3⁄16" H, 2 1⁄4" D (260 x 130 x 55mm).
B-203 SURFACE-MOUNTEDBOTTLE OPENER One-piece,16-gauge (1.6mm), type 304 stainless steel with satin finish.Opener projects 1" (25mm)from wall. Unit 1 7⁄8" wide, 2 1⁄4"high (50 x 55mm).
B-398 RECESSED MEDICINE CABINETType 304 stainless steel, satin finish. Mirror:
No. 1 Quality, 1⁄4" (6mm) glass electrolyticallycopper-plated. 15-year guarantee against silverspoilage. Door has full-length stainless steel piano-hinge, magnetic catch and cable doorstop. Fouradjustable stainless steel shelves. Cabinet may beinverted for right- or left-hand door swing. RoughWall Opening: 15 1⁄4" W, 25 1⁄2" H, 3 5⁄8" min. depth(385 x 650 x 90mm). Av. Mtg. Ht.: 74" (1880mm)to top of unit; Barrier-Free, 66 1⁄2" (1690mm).
B-299 SURFACE-MOUNTED MEDICINE CABINETSimilar to B-398. Unit 17" W, 26 7⁄8" H, 5" D (430 x685 x 130mm).
B-397 RECESSED MEDICINE CABINET All-steel cabinet with baked white enamel finish.
Three adjustable plastic shelves. Mirror: No. 1quality, 1⁄4" (6mm) glass electrolytically copper-plated. Door has enameled steel piano-hinge andmagnetic catch. Door is 15 1⁄2" W, 25 7⁄8" H (405 x655mm). Rough Wall Opening: 14" W, 23 5⁄8" H,3 1⁄2" min. depth (355 x 600 x 90mm). Av. Mtg. Ht.:73" (1855mm) to top of unit; Barrier-Free, 65 1⁄2"(1665mm).
B-297 SURFACE-MOUNTED MEDICINECABINET All-steel cabinet and two fixed
shelves with baked white enamel finish. Mirror:No. 1 quality, 1⁄8" (3mm) glass electrolyticallycopper-plated. Door has enameled steel piano-hingeand magnetic catch. Door is 14 1⁄8" W, 20 1⁄4" H(360 x 515mm). Unit 3 3⁄4" (95mm) deep. Av. Mtg.Ht.: 69" (1755mm) to top of unit; Barrier-Free, 60"(1525mm).
B-398
BA
THR
OO
M A
CC
ESSO
RIE
S
ƒƒ
ƒ
ƒƒ
UNIT COMBINES adjustable shelves, mirror, usedrazor blade slot, and toothbrush holder.
Recessed and Surface Mounted
B-355 RECESSED FACIAL TISSUE DISPENSERFaceplate type 304 stainless steel, satin finish.Galvanized-steel mounting cabinet. Dispenses300 two-ply facial tissues. Unit 11 7⁄8" W, 6 1⁄8" H,4" D (300 x 155 x 100mm). Rough Wall Opening:10 3⁄4" W, 5 1⁄4" H, 4" min. depth (275 x 135 x102mm).
B-3552 RECESSED FACIAL TISSUE DISPENSERDispenses one pack of 100 two-ply facial tissues.Faceplate type 304 stainless steel, satin finish.Galvanized-steel mounting cabinet. Unit 11 7⁄8" W,6 1⁄8" H, 2 1⁄4" D (300 x 155 x 55mm). Rough WallOpening: 10 3⁄4" W, 5 1⁄4" H, 2 3⁄8" min. depth(275 x 135 x 60mm).
ƒ
ƒƒ
41
B-518 FOLDING SHOWER SEAT Meets theneeds of the physically disabled and elderly.
Complies with ADA Barrier-Free accessibility guide-lines. Foam-padded, white, water-resistantNaugahyde seat 1 1⁄2" (38mm) thick, with enclosed1⁄2" (13mm) plywood base. Frame and mountingbrackets are type 304 stainless steel and featureself-locking mechanism. Supports up to 400 lb(181 kg) when properly installed. Seat 32 7⁄8"(835mm) wide, projects 22 11⁄16" (575mm) fromwall. Universal/ Barrier-Free Mtg. Ht.: 17–20" (430–510mm) from top of seat to floor. Left-hand seat.
B-517 Similar to B-518, but with right-hand seat.
204-2 VINYL SHOWER CURTAIN Opaque,matte white vinyl, .008" (0.2mm) thick,
contains antibacterial and flame-retardant agents.Nickel-plated brass grommets along top, one every6" (150mm). Bottom and sides are hemmed. Hooksare not included. Curtain 42" W, 72" H (1065 x1830mm). Requires 7 hooks.
204-3 Similar to 204-2, but curtain is 70" W,72" H (1780 x 1830mm). Requires 12 hooks.
204-1 SHOWER CURTAIN HOOK Type 304stainless steel for use on 1" and 1 1⁄4" (25 and32mm) diameter shower curtain rods.
ƒ
ƒ
ƒ
2 1⁄2" (65mm) Square Flangefor B-6047 and B-6107
B-6047 CLASSIC SERIES EXTRA-HEAVY-DUTYSHOWER CURTAIN ROD Type 304 stainless steel,satin finish. 18-gauge (1.2mm), 1 1⁄4" (32mm)diameter rod. Flanges are 2 1⁄2" (65mm) square.Available in ƒ36" (915mm), 48" (1220mm),ƒ60" (1525mm), 72" (1830mm), 96" (2450mm)lengths.
B-6107 CLASSIC SERIES HEAVY-DUTY SHOWERCURTAIN ROD Similar to B-6047, but with 20-gauge(1.0mm), 1" (25mm) diameter rod. Available inƒ36" (915mm), 48" (1220mm), ƒ60" (1525mm),72" (1830mm) lengths.
B-636 SURFACE-MOUNTED RETRACTABLECLOTHESLINE Installs over bathtub or in
shower. 8-ft (244cm) clothesline pulls out forconvenient use; retracts neatly out of way. Retainerbracket mounts on opposite wall to secure clothes-line. Cover and retainer bracket are bright polishedstainless steel. Unit 3 5⁄8" x 3 5⁄8" (90 x 90mm);projects 1 1⁄4" (30mm) from wall. Av. Mtg. Ht.: 70"(1780mm) to top of unit; Barrier-Free 38–48"(965–1220mm).
B-5191 SHOWER/DRESSING-AREA SEATCompact design. Seat is constructed of
durable, water-resistant, ivory-colored, 5⁄16" (8mm)thick solid phenolic. Frame and mounting bracketare type 304 stainless steel and feature self-lockingmechanism. Supports up to 500 lb (227 kg) whenproperly installed. Seat 18" (455mm) wide, projects15 13⁄16" (400mm) from wall. Universal/Barrier-FreeMtg. Ht.: 17–20" (430–510mm) from top of seatto floor.
B-519 Similar to B-5191, but with 1 1⁄2" (38mm)thick, foam-padded, white, water-resistantNaugahyde seat with enclosed 1⁄2" (13mm) plywoodbase. Seat 17 7⁄8" (455mm) wide, projects 16 1⁄4"(415mm) from wall.
ƒ
ƒ
B-4390
B-974RECESSED
VANDAL-RESISTANTSOAP DISH (SecuredFrom Rear) 16-gauge(1.6mm), type 304stainless steel.Flange satin finish,soap dish interior matte finish. Drawn, one-pieceseamless construction. Unit 7" W, 5" H, 2 œ" D(180 x 125 x 70mm). For walls up to 8" (205mm)thick. Barrier-Free Mtg. Ht.: 38–48" (965–1220mm)above the finish floor on same wall as shower head.
ƒ
ƒ
DESIGNER’S NOTESolid phenolic seats available in other colors on specialorder. See color selection on page 31.
SH
OW
ER/TU
B A
CC
ESSO
RIES
B -5181 REVERSIBLE FOLDING SHOWERSEAT Meets the needs of the physically
disabled and elderly. Complies with ADA Barrier-Freeaccessibility guidelines. Seat is constructed ofdurable, water-resistant, ivory-colored 1⁄2" (13mm)thick solid phenolic. Reversible for left- or right-handfield installation. Frame and mounting brackets aretype 304 stainless steel with self-locking mecha-nism. Supports up to 400 lb (181 kg) when properlyinstalled. Seat 33" (840mm) wide, projects 22 5⁄16"(565mm) from wall. Universal/Barrier-Free Mtg. Ht.:17–20" (430–510mm) from top of seat to floor.Left-hand seat shown.
FOLDED DOWN
FOLDED UP
B-5191
B-207 SHOWER CURTAIN ROD WITH CONCEALEDMOUNTING 1" (25mm) diameter rod is 20-gauge(1.0mm), type 304 stainless steel, satin finish. 1 5⁄8"(40mm) diameter flanges are chrome-plated plastic,bright polished finish; mount on concealed wallbrackets. Available in 36" (915mm), 48" (1220mm),ƒ60" (1525mm), 72" (1830mm) lengths.
ƒ
B-7636 CLASSIC SERIES SURFACE-MOUNTED RETRACTABLE CLOTHESLINE
Budget-priced model installs over bathtub or inshower. 10-ft (305cm) clothesline pulls out forconvenient use; retracts neatly out of way. Lockingknob on cover secures line. Retainer bracketmounts on opposite wall to secure clothesline.Cover and retainer bracket are bright polishedstainless steel. Unit 3 5⁄8" (90mm) diameter;projects 1 5⁄32" (30mm) from wall. Av. Mtg Ht: 70"(1780mm) to top of unit; Barrier-Free 38–48"(965–1220mm).
B-4390 RECESSED HEAVY-DUTY SOAPDISH AND BAR Type 304 stainless steel,
matte polished finish. Mounting clamp for studwalls. Unit 7 1⁄8" W, 5 1⁄8" H (180 x 130mm).Rough Wall Opening: 5 7⁄8" W, 3 œ" H, 4" min. depth(150 x 95 x 102mm). Barrier-Free Mtg. Ht.: 38–48"(965–1220mm) above the finish floor on same wallas shower head.B-4380 Similar to B-4390, but without bar.
42 ƒ USA & Canada QuickShip model. ƒƒ USA QuickShip model.
B-670 UTILITY HOOK Forrobes, shoe-shine cloth, and
sanitary napkin disposal bag. Flangeis 2" x 2" (50 x 50mm). Brightpolished stainless steel. Hook 1⁄2"(13mm) wide, projects 2" (50mm)from wall.
B-6707 Similar to B-670, but with satin finish.
B-7671 CLASSIC SERIESSINGLE ROBE HOOK Flange
is 2" x 2" (50 x 50mm). Brightpolished stainless steel. Projects1 5⁄8" (40mm) from wall.
B-76717 Similar to B-7671, but with satin finish.
B-671 SINGLE ROBE HOOK Similar to B-7671,but flange projects 2" (50mm) from wall.
B-6717 Similar to B-671, but with satin finish.
B-7672 CLASSICSERIES DOUBLE
ROBE HOOK Contoured 4"(100mm) wide bar formshook at each end. Flange is2" x 2" (50 x 50mm). Brightpolished stainless steel.Projects 1 7⁄8" (50mm) from wall.
B-76727 Similar to B-7672, but with satin finish.
B-672 DOUBLE ROBE HOOK Similar toB-7672, but projects 2 5⁄16" (60mm) from wall.
B-6727 Similar to B-672, but with satin finish.
B-677 CLASSIC SERIESTOWEL PIN Flange is 2" x 2"
(50 x 50mm). Bright polishedstainless steel. Projects 3 3⁄8"(85mm) from wall.
B-6777 Similar to B-677, but with satin finish.
B-212 CLOTHES HOOKAND BUMPER Solid
aluminum casting, matte finish.Rubber bumper protects wall orpartition surfaces. Flange is1 1⁄2" W, 2" H (40 x 50mm). Unitprojects 3 œ" (95mm).
B-233 CLOTHES HOOK11-gauge (3.2mm), type 304
stainless steel, satin finish. Hook is1 1⁄4" x 1 1⁄4" (30 x 30mm) andprojects 1 1⁄8" (30mm) from wall.Unit is 2 1⁄4" (55mm) high.
B-968 VANDAL-RESISTANT SHELF WITH HOOKS14-gauge (2mm), type 304 stainless steel withsatin finish. Shelf is 17 1⁄4" W, 8" D (440 x205mm). Four stainless steel hooks snap down forsafety if excessively loaded. Furnished with tamper-resistant mounting screws. Unit 18" W, 10 1⁄2" H,8 œ" D (455 x 265 x 220mm). Patented.
ƒ
ƒ
B-2116 HEAVY-DUTYCLOTHES HOOK WITH
CONCEALED MOUNTING Locksto wall plate with three stainlesssteel setscrews for theft-resistantmounting. Hook and flange are one-piece brasscasting with satin nickelplated finish to matchstainless steel. Withstands 300-lb (136-kg) downwardpull. Flange diameter: 2 œ" (70mm). Unit projects3 \" (85mm) from wall.
B-211 Similar to B-2116, butwith three exposed countersunkmounting screw holes.
B-682 HAT AND COAT HOOKFlange is 2" x 2" (50 x 50mm).
Bright polished stainless steel. Hook1" W, 6 1⁄4" H (25 x 160mm); projects3" (75mm) from wall.
B-6827 Similar to B-682, but withsatin finish.
B-982 VANDAL-RESISTANT CLOTHES
HOOK (Secured From Rear) Type304 satin-finish stainless steel.Back plate is 14-gauge (2mm).Hook snaps down for safety ifexcessively loaded. Back plate4" W, 4" H, 7⁄8" D (100 x 100 x20mm). Hook projects 1 1⁄4"(30mm) from back plate. For walls up to 8" (205mm)thick. Patented.
B-983 Similar to B-982, but secured from front withtamper-resistant mounting screws.
B-981 VANDAL-RESISTANTCLOTHES HOOK For budget
installations. 12-gauge (2.7mm),type 304 stainless steel bracketwith 7-gauge (4.5mm) stainlesssteel hook. Hook pivots down forsafety if excessively loaded. Hooktension adjustable. Furnished withtamper-resistant mounting screws.Hook 4 5⁄16" H, 1" W (110 x 25mm);projects 3" (75mm) from wall.
B-232 HOOK STRIP Type 304 stainlesssteel, satin finish. Hooks are 1" W, 6 1⁄2" H
(25 x 165mm); project 2 1⁄4" (55mm) from wall.Mounting strip is 4" (100mm) high and has 1⁄4"(6mm) return.
Model No. No. Hooks Length
ƒB-232x24 3 24" (610mm)B-232x36 4 36" (915mm)
B-985 VANDAL-RESISTANT HOOK STRIPBack plate is 14-gauge (2mm), type 304,
satin-finish stainless steel. Four stainless steelhooks snap down for safety if excessively loaded.Furnished with tamper-resistant mounting screws.Unit 18" W, 5 1⁄2" H, 7⁄8" D (455 x 140 x 20mm).Hooks project 1 1⁄4" (30mm) from back plate.Patented.
DESIGNER’S NOTEModels B-295, B-296 and B-298 stainless steelshelves are available on special order in lengthsup to 28 ft (853cm). Shelves longer than 8 ft(244cm) are furnished in multiple sections. 10"and 12" (255 and 305mm) wide shelves are alsoavailable on special order. Contact your BobrickRepresentative for full details.
BARRIER-FREE BATHROOM GUIDELINESIt is recommended that surface-mounted hooks,hook strips and shelves be mounted 38" to 40"(965–1220mm) above the finish floor.
Surface MountedH
OO
KS/SH
ELVES
/C
USTO
DIA
L A
CC
ESSO
RIE
S
ƒ
ƒ
ƒ
ƒ
ƒ
B-232x24
ƒ
ƒƒ
ƒ
ƒ
ƒ
ƒƒ
ƒ
ƒ
B-295 STAINLESS STEELSHELF 5" (125mm) wide,18-gauge (1.2mm), type 304stainless steel, satin finish. œ"(19mm) return edge; front edge is hemmed forsafety. Brackets are 16 gauge (1.6mm). Availablein one-piece lengths: ƒ16", ƒƒ18", ƒƒ24", 36"(405, 455, 610, 915mm).
B-296 Similar to B-295, but shelf is 6" (150mm)wide.
B-298 Similar to B-295, but shelf is 8" (205mm)wide.
B-983
B-287 FOLDING UTILITY SHELF Easily installedon toilet partition or wall. Type 304 stainlesssteel, satin finish. Pull-down shelf returns toupright position when not in use. Shelf 14 1⁄2"long, 5 œ" wide (370 x 145mm).
DESIGNER’S NOTEBobrick Diaper Changing Station Models B-2200,B-2210 and B-2300 comply with ASTM PS 125-01Provisional Standard Consumer Safety PerformanceSpecification for Diaper Changing Tables forCommercial Use, published September 2001. Alllabels comply with ANSI Z535.3 Criteria for SafetySymbols, ANSI Z535.4 Product Safety Signs andLabels and ANSI Z535.1 Safety Color Code.
B-224 SHELF WITH MOP AND BROOM HOLDERSAND RAG HOOKS Shelf is 18-gauge (1.2mm), type304 stainless steel, satin finish; 36" Long, 6" H,8" D (915 x 150 x 205mm). Four anti-slip mopholders have spring-loaded rubber cam that gripshandles 7⁄8" to 1 1⁄4" (20–30mm) diameter. Holdsmops 8" (205mm) from wall. Three stainless steelrag hooks. Rod for wet rags below shelf.
B-239 CLASSIC SERIES SHELF WITH MOP ANDBROOM HOLDERS AND HOOKS Shelf is 18-gauge(1.2mm), type 304 stainless steel, satin finish; 34"Long, 13" H, 8" D (865 x 330 x 205mm). Threeanti-slip mop holders have spring-loaded rubber camthat grips handles 7⁄8" to 1 1⁄4" (20–30mm) dia. Fourstainless steel hooks.
B-505 RECESSEDSPECIMEN PASS-THRU CABINETProvides convenientpassage for speci-men from patientarea to laboratory.Mounts in walls 3"to 5 œ" (75–145mm)thick. Type 304stainless steel, satinfinish. Self-closing doors. Interlocking mechanismprevents both doors from being open at the sametime; provides sight barrier. Removable stainlesssteel tray. Rough Wall Opening: 11 1⁄2" W, 10 7⁄8" H(290 x 275mm); 3" to 5 œ" (75–145mm) thick.
B-235 SURFACE-MOUNTEDPAPER CUP DISPENSER Satin-
finish stainless steel. Dispenses 1503-oz (0.1-L) cups. Also adjusts to dis-pense up to 6-oz (0.2-L) cups. Tumblerlock on top and stainless steel piano-hinge on bottom. Cabinet swings downfor easy filling. Slot on front indicatesrefill time. Unit 3 1⁄4" W, 14 1⁄2" H, 3 1⁄4" D(85 x 370 x 85mm). Universal/Barrier-Free Mtg. Ht.: 52 1⁄2"–58 1⁄2"(1335–1485mm) to top of unit.
ƒƒ
B-633 STAINLESS STEELCORNER GUARDS Eliminateexpensive maintenance work.18-gauge (1.2mm), type 304stainless steel, satin finish.No sharp edges. Furnished withadhesive mounting for easy permanent installation. Unit3 1⁄2" x 3 1⁄2" (90 x 90mm); 48"(1220mm) long.
ƒƒ
B-223 MOP AND BROOM HOLDER Type 304stainless steel, satin finish. Anti-slip mop holdershave spring-loaded rubber cam that grips handles7⁄8" to 1 1⁄4" (20–30mm) diameter. Holds mops3 1⁄4" (85mm) from wall. Height 5" (125mm).
Model No. No. Holders Length
ƒB-223x24 3 24" (610mm)ƒƒB-223x36 4 36" (915mm)
ƒ
Recessed and Surface Mounted
ƒƒ
ƒƒ
HEA
LTHC
AR
E AC
CES
SO
RIES
/C
HILD
CA
RE P
RO
DU
CTS
B -2210 SURFACE-MOUNTED DIAPERCHANGING STATION Provides safe,
convenient location for parent and child in publicwashroom. Bed features smooth concave changingarea with safety strap, hooks for bags and purses,and universal instruction graphics. Pneumaticcylinder provides controlled, slow opening andclosing. Nonporous polyethylene resists odors andbacterial growth; matches Bobrick color #889 Grey.Unit has foam core for added durability. No hingestructure exposed on interior or exterior surfaces.Bed secured to back plate with concealed full-lengthstainless steel hinge rod with steel bushingsimbedded in plastic. Supports up to 250 lb (113kg)when properly installed. Equipped with multi-sizeliner dispenser that accommodates manycommercially available folded liners and dentalbibs, as well as C-fold or multifold paper towelsmeasuring 6 1⁄2" to 10 5⁄8" long by 2 5⁄8" to 4 7⁄8"wide (165–270mm x 65–125mm). Unit is openedand closed with one hand and less than 5 poundsof force (22.2 N). Unique design allows unit to besemi-recessed into wall opening 2 1⁄2" (65mm) deep.Unit 32" W, 20" H (815 x 510mm). When closed,surface-mounted unit projects 4" (102mm); semi-recessed unit projects 1 5⁄8" (4Omm). When open,surface mounted bed projects 19" (485mm) fromwall; semi-recessed bed projects 16 5⁄8" (420mm).For semi-recessing, provide Rough Wall Opening30 3⁄4" W, 18 3⁄4" H, 2 1⁄2" D (780 x 475 x 65mm).Universal/Barrier-Free Mtg. Ht.: 47 1⁄2" (1205mm)to top of unit. Patented.
B-2200 Similar to B-2210, but without multi-sizeliner dispenser. Patented.
2210-40 LINERS FOR DIAPER CHANGINGSTATION Optional accessory for multi-size linerdispenser in Model B-2210. Case of 500 absorbentpaper liners with soil-resistant plastic backing.
ƒ
ƒƒB-2230 CLASSIC SERIES SURFACE-MOUNTED DIAPER CHANGING STATION
Provides safe, convenient location for parent andchild in public washrooms at a budget price. Unitfeatures a smooth concave changing area with nylonsafety strap, two hooks for bags, purses andinstruction graphics. Durable, high-impactpolyethylene body resists odors and bacterialgrowth, light grey color. Pneumatic cylinder providescontrolled, slow opening and closing of bed. Nohinge structure exposed on interior or exteriorsurfaces. Bed secured to backplate with concealedfull-length stainless steel hinge rod with steelbushings embedded in the plastic. Unit supportsloads up to 250 lb. (113kg) when properly installed.Equipped with liner dispenser that accommodatesmany commercially available folded liners. Unit isopened and closed with one hand and less than5 pounds of force (22.2 N). Unit 34 1⁄4" W, 16 7⁄8" H(870 x 430mm). When closed, surface-mounted unitprojects 4" (102mm) from wall; when open, bedprojects 18" (455mm). Universal/Barrier-Free Mtg.Ht.: 48 1⁄4" (1225mm) to top of unit. Patented.
B-223x24
BARRIER-FREE WASHROOM GUIDELINESDiaper Changing Stations and Child Seats shallbe installed with top of unit no more than 48"(1220mm), and changing bed or seat no morethan 34" (865mm) above finish floor. Units shalloperate (open and close) with one hand and lessthan 5 pounds of force (22.2 N). When closed unitsshall protrude no more than 4" (100mm) from wall.
4343