Science Fair Ready, Set, Go!. Timeline and Dates February 28 Entry Forms due for Southern...
-
Upload
sibyl-brown -
Category
Documents
-
view
214 -
download
0
Transcript of Science Fair Ready, Set, Go!. Timeline and Dates February 28 Entry Forms due for Southern...
Timeline and Dates
• February 28 Entry Forms due for Southern Appalachian Science and Engineering Fair
• April 7 Southern Appalachian Science and Engineering Fair (SASEF) project setup
and judging• April 9 SASEF Awards Ceremony
Jefferson County Schools has formed a Jefferson County Schools has formed a partnership with the Appalachian Electric partnership with the Appalachian Electric Cooperative for the Science Fair.Cooperative for the Science Fair.
Role of the Teacher• You are an advisor.
• Recognize the need for active student involvement.
• Respect student ideas and help steer them in the correct direction.
• Praise and encourage students.
• Advise students of resources available.
Tips for the Students• A Science Fair project is an investigation –
not a demonstration. There is a question that must be answered.
• If they have a demonstration in mind, help them to alter the thought process to asking a question: What is in _______? Why does this happen? Can I do this a better way? How does temperature change the behavior?
Components of a Project
• Question or Problem
• Hypothesis – If – then format
• Methods
• Materials
• Results – drawings, pictures, graphs, tables
• Conclusion
DO NOT use I, we, you!DO NOT use I, we, you!
Variables• The independent variable is the one that is
changed by the scientist. In an experiment there is only one independent variable.
• The dependent variable changes in response to the change the scientist. Experiments also have controlled variables.
• There should be a Control. No experimental treatment is applied.
• Constants are conditions that remain the same for all parts of the experiment, such as measuring the water, always by a window, same position in the room, etc.
Display Board
Arrange information so that it is easy to read and flows in a logical order.
Top to bottom and left to right.
Presentation boards (32” x 48”), awards, etc. may be ordered from EPI. (800-426-2737 or www.epidisplays.com)
Sample Materials List( From Science Buddies)
• CD player & a CD (low drain device) • Three identical flashlights (medium drain device) • Camera flash (high drain device) • AA size Duracell and Energizer batteries • AA size of a "heavy-duty" (non-alkaline) battery
(I used Panasonic) • Voltmeter & a AA battery holder • Kitchen timer
Sample Procedure( From Science Buddies)
• Number each battery so you can tell them apart. • Measure each battery's voltage by using the voltmeter. • Put the same battery into one of the devices and turn it on. • Let the device run for thirty minutes before measuring its voltage
again. (Record the voltage in a table every time it is measured.) • Repeat #4 until the battery is at 0.9 volts or until the device stops. • Do steps 1–5 again, three trials for each brand of battery in each
experimental group. • For the camera flash push the flash button every 30 seconds and
measure the voltage every 5 minutes. • For the flashlights rotate each battery brand so each one has a turn
in each flashlight. • For the CD player repeat the same song at the same volume
throughout the tests.