Schwarzer.com: Eccentric Diaphragm Pumps for Liquids 200 EC-L / 270 EC-L
3
Eccentric Diaphragm Pumps for Liquids 200 EC-L / 270 EC-L Product Features Applications • oil free • Industrial Applications • maintenance free • Medical Applications • reduced vibrations • Laboratory and Analytical Applications • very low noise • Cooling and Heating • small size • Cleaning • lightweight • minimal current consumption • self priming Am Lichtbogen 7 • 45141 Essen • Germany Phone: +49 201 31697-0 • Fax: +49 201 31697-29 e-mail: [email protected] • http://www.schwarzer.com SP 270 EC-LC-L SP 200 EC-LC-L SP 270 EC-DB-L Subject to change without notice. Given values are for preliminary information only and not legally binding . 19.12.2013
-
Upload
schwarzerprecision -
Category
Documents
-
view
213 -
download
0
description
The pumps (liquid pumps) listed in this document represent a typical selection of our wide range of eccentric pumps and are intended for initial tests. Customised versions for your individual application would be made without extra costs. In order to reduce noise and vibration we recommend securing the pump in one of the following ways: With padded double sided adhesive tape. With Velcro (hook and loop) tape for easy assembly and service. Put the pump in a box lined with foam. Wires for the motor and tubing for the pump can go through a hole in the side of the box. Product features are oil free, maintenance free, reduced vibrations, very low noise, small size, lightweight, minimal current consumption and self priming. Applications: Industrial Applications, Medical Applications, Laboratory and Analytical Applications, Cooling and Heating and Cleaning.
Transcript of Schwarzer.com: Eccentric Diaphragm Pumps for Liquids 200 EC-L / 270 EC-L
Eccentric Diaphragm Pumps for Liquids
200 EC-L / 270 EC-L
Product Features Applications
• oil free • Industrial Applications• maintenance free • Medical Applications• reduced vibrations • Laboratory and Analytical Applications• very low noise • Cooling and Heating• small size • Cleaning• lightweight• minimal current consumption• self priming
Am Lichtbogen 7 • 45141 Essen • GermanyPhone: +49 201 31697-0 • Fax: +49 201 31697-29
e-mail: [email protected] • http://www.schwarzer.com
SP 270 EC-LC-L
SP 200 EC-LC-L
SP 270 EC-DB-L
Subject to change without notice. Given values are for preliminary information only and not legally binding . 19.12.2013
Eccentric Diaphragm Pumps for Liquids
200 EC-L / 270 EC-L
The pumps listed below represent a typical selection of our wide range of eccentric pumps and are intended for initial tests.Customised versions for your individual application would be made without extra costs - please contact us!
Designation SP 200 EC-LC-L
Operating Voltage* 6 Vdc 4,5 Vcd 6 Vdc 12 Vdc 6 Vdc 12 VdcArt.No. 7s55090 7s55049 7s55089 7s55079 7s55097 7s55096
Free Flow [ml/min] 100 100 100 100 100 100Max Press. Height [m H2O] > 10 > 10 > 10 > 10 > 10 > 10
Max Vacuum (dry) [mbar] -150 -200 -200 -200 -150 -150
Max Suction Height (filled with water) [m H2O] -3,0 -2,5 -2,5 -2,5 -3,0 -3,0
Motor Typestandard Iron Core DCoptional -
max. curr. at free flow [mA] 240 130 110 100 100 100
Pump Body / Headstandard optional
Diaphragm, Valvesstandard optional
Weight [g] 17,1
* other voltages on request
Am Lichtbogen 7 • 45141 Essen • GermanyPhone: +49 201 31697-0 • Fax: +49 201 31697-29
e-mail: [email protected] • http://www.schwarzer.com
SP 270 EC-DB-L
long life skew wound
SP 270 EC-LC-L
Iron Core DC-
Hydraulic Performance (measured with water)
Power Consumption
Although the pumps are able to produce pressure above 10 mWC, it is not recommended to exceed this limit!
Performance Curves
Construction
PA6
EPDMFKM
brushless
25,3 30,3
PPS
0
20
40
60
80
100
-4,0 -3,0 -2,0 -1,0 0,0 1,0 2,0 3,0 4,0 5,0 6,0 7,0 8,0 9,0m H2O
ml/min SP 270 EC-LC-L 4,5 / 6 / 12 Vdc
SP 200 EC-LC-L 6 Vdc
SP 270 EC-DB-L 6 / 12 Vdc
Subject to change without notice. Given values are for preliminary information only and not legally binding. 19.12.2013
Eccentric Diaphragm Pumps for Liquids
200 EC-L / 270 EC-L
In order to reduce noise and vibration we recommend securing the pump in one of the following ways:
• with padded double sided adhesive tape• with Velcro (hook and loop) tape for easy assembly and service• Put the pump in a box lined with foam. Wires for the motor and tubing for the pump can go through a hole in the side of the box.
Art.No.: 5.58.14
Metal Clip for:
• SP 270 EC-L• SP 270 EC-LC-L
Standard: connection ports as shown. Optional: 3 other port positions possible (see dashed lines)
Am Lichtbogen 7 • 45141 Essen • GermanyPhone: +49 201 31697-0 • Fax: +49 201 31697-29
e-mail: [email protected] • http://www.schwarzer.com
SP 200 EC-LC-L Mounting
SP 270 EC-LC-L SP 270 EC-DB-L
Subject to change without notice. Given values are for preliminary information only and not legally binding. 19.12.2013
