SCHULER MS550 Multi-Screw Mixers MS750schulermfg.net/Twin-Auger-Mixer/Schuler_MS550_MS750.pdf ·...
3
Proudly built in the USA By Schuler Mfg. An Iowa Company Office: 712.774.2228 Fax: 712.774.2230 SCHULER MFG. & Equip. Co., Inc. www.schulermfg.net 63724 Richland Rd. Griswold, IA 51535-6668 USA MS550 MS750 SCHULER Multi-Screw Mixers That has been the foundation of Schuler Mfg. since we began manufacturing cattle feeding equipment in 1964. Located in the heartland of America, our goal has always been to earn our customers’ business by delivering equipment that is built with pride and value. That’s why we were one of the last mixer companies on the market to introduce our MS550 and MS750 Multi-Screw Mixers. While other companies joined together two single screw vertical mixers and called it a twin-screw “mixer”, we wanted to design and build a better, improved multi-screw mixer with the multiple mechanical means to FORCE exchange of feedstuffs between the mixers. Even though single screw mixers can be designed to mix well, two single screw mixers mounted to a common floor plate, sharing an open end between them, still act as two independent single screw mixers. The Schuler MS550 & MS750 multi-screw mixers aren’t just improved over other twin screw mixers, they incorporated a basic mixing science that works better and adds more value to a multi-screw mixer! Quality Built To Last Longer… 11.09.11 5583_MS550_MS750_2.indd 1 12/21/11 8:11:39 AM
Transcript of SCHULER MS550 Multi-Screw Mixers MS750schulermfg.net/Twin-Auger-Mixer/Schuler_MS550_MS750.pdf ·...
Proudly built in the USA By Schuler Mfg.
An Iowa Company
Office: 712.774.2228 Fax: 712.774.2230
SCHULER MFG. & Equip. Co., Inc.
www.schulermfg.net
63724 Richland Rd. Griswold, IA 51535-6668 USA
MS550MS750
SCHULERMulti-Screw Mixers
That has been the foundation of Schuler Mfg. since we began manufacturing cattle feeding equipment in 1964. Located in the heartland of America, our goal has always been to earn our customers’ business by delivering equipment that is built with pride and value.
That’s why we were one of the last mixer companies on the market to introduce our MS550 and MS750 Multi-Screw Mixers. While other companies joined together two single screw vertical mixers and called it a twin-screw “mixer”, we wanted to design and build a better, improved multi-screw mixer with the multiple mechanical means to FORCE exchange of feedstuffs between the mixers. Even though single screw mixers can be designed to mix well, two single screw mixers mounted to a common floor plate, sharing an open end between them, still act as two independent single screw mixers. The Schuler MS550 & MS750 multi-screw mixers aren’t just improved over other twin screw mixers, they incorporated a basic mixing science that works better and adds more value to a multi-screw mixer!
Quality Built To Last Longer…
11.09.11
5583_MS550_MS750_2.indd 1 12/21/11 8:11:39 AM
1. With each revolution of the augers, feedstuffs are pulled out of the opposite auger chamber, positively creating exchange of feedstuffs between the augers. Overlapping augers also speed up the cleanout of feedstuffs at the end of a batch. The rear auger can easily feed the front auger and the discharge door because of the overlap feature. Also, baffles between augers are small as a result of the overlapping design. Large baffles slow cleanout and restrict end-to-end feed mixing.
2. Directional baffles between the augers are uniquely designed to produce end-to-end feed movement by being offset from the centerline of the mixing tub. The RH baffle center edge is closer to the front auger and the LH baffle center edge is closer to the rear auger. Because the baffles are offset, feedstuffs quickly transfer over the perpendicular center edge of the baffle when the mixer is being loaded while mixing, creating feed transfer between the adjacent augers which is essential for consistent mixing.
3. Tri-pulse legs on both augers enhance mixing and clean out.
4. Replaceable edge deflector pulls feedstuffs from the mixer sidewalls to load the center of the auger and reduce mixing time.
5. Variable pitch auger flighting reduces horsepower robbing feed drag between the flights. Flighting is 5/8” thick, AR200 steel.
6. Mixer chamber sides are 1/4” thick. Mixer floor is 3/4” thick. Sides are AR200 steel.
Folding Discharge Extension
Optional Bi-directional Discharge
Rear Discharge Door
NEW Single Edge Knife Blades
High Volume Capacity Door
Overlapping Auger Design
Truck Mounted Unit Shown
5583_MS550_MS750_2.indd 2-3 12/21/11 8:11:51 AM
Disclaimer- “Schuler Mfg. reserves the right to make design changes and improvements with no obligation to retro-fit prior machines. Pictures may show special order options. Check with Dealer or Factory for details.”
Call or Email Schuler Manufacturing For a Dealer Near You.(712) 774-2228 Email: [email protected]
Specifications MS550 MS750Mixing Capacity, no extensions ................................. 550 cu ft1 .. 700 cu ft1
with rubber extensions ................... 625 cu ft1 .. 780 cu ft1
Loading Height, no extensions .....................................93”* ........ 113”†
with rubber extensions ......................100”* ....... 120”†
Overall Height ........................................ 100½”* ..... 113”†
Front Discharge Height folding bunk extension, low, no magnets ..................................... 34¼”** ........ 38”
folding bunk extension, high, no magnets .......................................42”** ........45¾”
(flat) only, no magnets .......................21”** ......... 25”
Overall Length front discharge and no rear door ..... 274”*** ..... 278”‡
side discharge and no rear door ..... 260”*** ..... 264”‡
Overall Width mixer, w/front discharge and folding bunk ext., up, no magnets ................106”** ....... 106”
mixer, w/front discharge and folding bunk ext., down, no magnets ...........125”** ....... 127”
mixer, w/front discharge (flat) no magnets ...................................... 116”** ....... 119”
Weight (lbs.) w/front discharge and folding bunk extension ............. 12,600 ..... 14,560
*Measurements approx. with standard 17.5” wheels and tires, 18” drawbar height. For optional 22” wheels and tires add 4”.
**Magnets add 12” to length and reduce ground clearance at bottom of spout by 10”
***Rear discharge door option, add 12”
‡ Rear discharge door option, add 10”
†Measurements approx. with standard 22.5” wheels and tires, 18” drawbar height
1 Mixing capacity arrived at by taking “As Fed” feed samples in a cubic foot box, weighing each sample, then dividing cubic foot weight into the total weight of feed in the mixer. For reference, dairy rations sampled weighed from 20 lbs. to 23 lbs. a cubic foot
Schuler Mfg. & Equip Co. reserves the right to make changes to specs without notice.
Standard and/or optional features at time of printing. Features are subject to change without notice. Also, pictures may show optional features. Check with factory to confirm standard and optional features. Schuler Manufacturing is constantly seeking to improve design and may make changes without incurring any obligation to retrofit existing machines.
4Single speed or 2-speed gearbox.
4540 or 1000 PTO reliable planetary auger drive.
4Auger drive includes integral planetary bearing tower design with flange drive resulting in the strongest support for the auger when mixing large round bales.
4Constant velocity tractor driveline standard permits mixing on the go.
4Platform standard. Easy to inspect mixer chamber and augers before loading with mixer not running.
4Heavy duty jack standard.
4Optional rubber top extensions to increase hay volume capacity.
Features
5583_MS550_MS750_2.indd 4 12/21/11 8:11:55 AM
