Schindler 3100, Schindler 3300, Schindler 3300 XL, …...Low Rise Traction Elevator Fixtures 3100,...
8
Schindler Low Rise Traction Elevator Fixtures 3100, 3300, 3300 XL
Transcript of Schindler 3100, Schindler 3300, Schindler 3300 XL, …...Low Rise Traction Elevator Fixtures 3100,...
Schindler Low Rise Traction Elevator Fixtures3100, 3300, 3300 XL
Low Rise Traction Elevator Fixtures3100, 3300, 3300 XL
2 Schindler Low Rise Traction Elevator Fixtures
Car operating panel
Signalizations
Floor position indicator
Firefighters Service indicator
EMT/EMS Service
Emergency lamp
Floor call buttons
Alarm
Phone
Door open/close
Hoistway access enable key
Independent Service key Run/Stop
Signalizations on car operating panel
Overload protection:Red scale-shaped icon, along with an adjustable buzzer, that provides prompting of some off-loading of passengers or items. The message is also presented as “OL” in the car floor indicator position.
Central alarm:
Yellow bell-shaped icon that is visible only if activated by an alarm request. The icon is also accompanied by the sounding of the car top buzzer.
Voice communication:
Green phone-shaped icon indicates that voice communication has been established.
Earthquake: Red shaking building icon depicts that a seismic event has been detected.
Medical emergency service: A blue/grey box with white lettering depicts that a medical emergency has been activated.
Evacuation: Red cab-shaped icon that indicates that passengers should leave the cab.
EARTHQUAKE
EARTHQUAKE
EARTHQUAKE
EARTHQUAKE
EARTHQUAKE
EARTHQUAKE
The features and components of the Schindler 3100, 3300, and 3300 XL machine room-less elevators are designed to enhance the rider experience, improve safety, and minimize downtime. From the low-energy multiprocessor controls to the stylish operating panels, you’ll find the latest technological advances.
Standard car operating panel– Stylish stainless steel and tempered safety glass– Door open/close and alarm buttons– Braille – Visual and audible call confirmation– Position indicator– Concealed Phase II Firefighters Service operation– Attractive, metallic-finished pushbutton
Low Rise Traction Elevator Fixtures3100, 3300, 3300 XL
3Schindler Low Rise Traction Elevator Fixtures
Stylish stainless steel with tempered safety glass accents give the elevator a contemporary, modern look while meeting all applicable codes. Please refer to our deco brochure for more information on decor and accessory options.
Hall pushbuttons
Car indicator fixture Combination landing indicator alternately showing landing or direction
Standard landing operating panels– Stylish stainless steel with tempered safety glass accent, with pushbuttons– Jamb mounted for fewer building interfaces– Call acceptance both visual and audible– Raised, tactile circle for positive contact assurance– Metallic button finish.
Optional– Wall-mounted car call buttons or landing indicator fixtures.
Note: The car specifications, options and colors in this brochure are representative only and are subject to change. Sample shown may vary from the original in color and materials.
4 Schindler XXXX
Low Rise Traction Elevator Fixtures3100, 3300, 3300 XL
4 Schindler Low Rise Traction Elevator Fixtures
Jamb-mounted landing and car indicator fixtures
Jamb-mounted hall pushbuttons
Car operating panel
4
3
2
1�
48”
(122
0mm
) Max
.PB
Hei
ght
35”
(890
mm
) Min
. to
Emer
genc
yC
ontr
ols
FIREFIGHTERS’ORERATION
CAR #1
50 7 /
8” (1
292m
m)
9 3/4” (247mm)1 3/16”(30mm)
2 1/2”(63mm)
2”(51m
m)
2”
/4 ”1/16”92 (65mm) (6mm)
(6mm)/16”92 (65mm)
(160
mm
)
(290
mm
)
97 /
”
11 7 /1
6 ”
/16”92 (65mm)
(290
mm
)11
7 /16 ”
1/4 ”
/16”
56
/16”92 (65mm)
(130
mm
)/8
”1
5
/16”92 (65mm)
(130
mm
)/8
”1
5
8
2”
/4 ”1/16”92 (65mm) (6mm)
(6mm)/16”92 (65mm)
(160
mm
)
(290
mm
)
97 /
”
11 7 /1
6 ”
/16”92 (65mm)
(290
mm
)11
7 /16 ”
1/4 ”
/16”
56
/16”92 (65mm)
(130
mm
)/8
”1
5
/16”92 (65mm)
(130
mm
)/8
”1
5
8
Jamb-mounted hallway access switch
Jamb-mounted Fire Service keyed switch
Jamb-mounted combination keyed switch
(6.2 mm)
5 Schindler XXXXSchindler Passenger Elevators
Additional 3300 XL FixturesOutfit your elevator with style
Schindler 3300 XL exclusive fixtures and landing indicators feature a flush-mounted and full-length car operating panel, along with unique landing fixture options. Additional vandal-resistant car operating panel and hall pushbuttons available.
Hall pushbuttons
Hall pushbuttons
Vertical combination hall lantern and position indicator
Standard Landing FixturesStandard panels, available in white or black glass, give your elevator a contemporary look.
Vandal-Resistant Landing FixturesProtect your investment: optional vandal-resistant fixtures are engineered to withstand even the most challenging environments.Note: Vandal-resistant fixtures available only in wall-mounted configurations
Car lantern
Car lantern
Car operating panel: full-length, flush-mounted
Floor position indicator
Firefighters Service indicator
Emergency lamp
Floor call buttons
Phone
Independent service key
Run/Stop
Door open/closeHoistway access enable key
Vandal-resistant car operating panel: full-length, flush-mounted
Vertical combination hall lantern and position indicator
5Schindler Low Rise Traction Elevator Fixtures
6 Schindler XXXX
Additional 3300 XL FixturesDimensions
Wall-mounted landing fixtures, flush in wall boxBox Cutout Depth = 4” (120mm)
Choose your optimal landing arrangements for simplex and multiplex installations. Standard fixtures are jamb-mounted.
Jamb-mounted landing fixtures, flush in frame4” (120mm) minimum frame width
3 9/16” (90mm)
Box Cutout = 3 3/16” (80mm)
Box
Cut
out =
11
1 /16”
(280
mm
)
Box
Cut
out =
11
1 /16”
(280
mm
)
11
7 /16”
(290
mm
)
Box
Cut
out =
5
16/16
” (1
50m
m)
6 5 /1
6” (1
60m
m)
Box
Cut
out =
5
16/16
” (1
50m
m)
6 5 /1
6” (1
60m
m)
6 5 /1
6” (1
60m
m)
5 1 /8
” (1
30m
m)
3 9/16” (90mm)
Box Cutout = 3 3/16” (80mm)
3 9/16” (90mm)
Box Cutout = 3 3/16” (80mm)
3 9/16” (90mm)
Box Cutout = 3 3/16” (80mm)
Vertical Combination Hall Lantern and Position Indicator
Main Landing Pushbuttons and Fire Service Switch
IntermediatePushbuttons
TerminalPushbuttons
2 9/16”(65mm)
5 1 /8
” (1
30m
m)
Hoistway Access Switch
2 9/16”(65mm)
13/16”(21mm)
2 9/16”(65mm)
2 9/16”(65mm)
11 7 /1
6” (2
90m
m)
5 5 /1
6” (1
60m
m)
5 1 /8
” (1
30m
m)
6 5 /1
6” (1
60m
m)
2 9/16”(65mm)
2 9/16”(65mm)
6 5 /1
6” (1
60m
m)
5 1 /8
” (1
30m
m)
Vertical CombinationHall Lantern andPosition Indicator
Main Landing Pushbuttons and Fire Service Switch
All TypicalDepths
IntermediatePushbuttons
TerminalPushbuttons
Hoistway Access Switch
Car operating panel
2
1HLL
3
54
76
98
Equa
l to
door
hei
ght*
*
48”
(122
0mm
) Max
. Pus
hbut
ton
Hei
ght
2’-1
1 1 /
16”
(890
mm
) Min
. To
Emer
genc
y C
ontr
ols
FIREFIGHTERS’ORERATION
2’-2
5 /8”
(677
mm
) To
Car
d Re
ader
11 7/8” (300mm)*
6 Schindler Low Rise Traction Elevator Fixtures
Note: Car operating panels are full length and flush mounted. Card reader and service cabinet optional.*Car operating panel width can be 11 7/8” (300mm) or 13 3/4” (350mm) depending on the number of buttons.**Door heights are 7’ (2134mm), 8’ (2438mm), or 9’ (2743mm). Door height options vary by configuration, pleasecontact your local Schindler sales representative.**
2 1/4” (59mm)
7 Schindler XXXX
Additional 3300 XL FixturesVandal-resistant Dimensions
Vandal-resistant landing fixtures, flush in wall boxBox Cutout Depth = 4” (120mm)
Note: Vandal-resistant fixtures available only in wall-mounted configurations
Car operating panel with vandal-resistant buttons
3 3/4” (95mm)
Box Cutout = 2 15/16” (74mm)
Box
Cut
out =
1 1 /
16”
(306
mm
)
1 7 /
8” (3
27m
m)
Vertical Combination Hall Lantern and Position Indicator
Box
Cut
out =
6
9 /16
” (1
67m
m)
7 1 /
16”
(180
mm
)
4 3/4” (120mm)
Box Cutout = 4 1/8” (105mm)
IntermediatePushbuttons
Box
Cut
out =
1’ 0
9 /16
” (3
19m
m)
1’ 1
3 /16
” (3
35m
m)
4 3/4” (120mm)
Box Cutout = 4 1/8” (104mm)
7 7/8” (200mm)
Box Cutout = 7” (178mm)
Box
Cut
out =
1’ 0
9 /16
” (3
19m
m)
1’ 1
3 /16
” (3
35m
m)
Main Landing Pushbuttons and Fire Service Switch
Box
Cut
out =
6
9 /16
” (1
67m
m)
7 1 /
16”
(180
mm
)
4 3/4” (120mm)
Box Cutout = 4 1/8” (105mm)
Terminal Pushbuttons
11
7 /16”
(290
mm
)
2 5/16” (58mm)
Car Lantern
48”
(122
0mm
) Max
. Pus
hbut
ton
Hei
ght
2’-1
1 1 /
16”
(890
mm
) Min
. To
Emer
genc
y C
ontr
ols
2’-2
5 /8”
(677
mm
) To
Car
d Re
ader
Equa
l to
door
hei
ght*
*
11 7/8” (300mm)*
7Schindler Low Rise Traction Elevator Fixtures
Note: Car operating panels are full length and flush mounted. Card reader and service cabinet optional.*Car operating panel width can be 11 7/8” (300mm) or 13 3/4” (350mm) depending on the number of buttons.**Door heights are 7’ (2134mm), 8’ (2438mm), or 9’ (2743mm).**
2 1/4” (59mm)
3330
-330
0XL
SF B
RO-W
F2 0
120
© S
chin
dler
Ele
vato
r C
orpo
ratio
n
SchindlerPlan.comElevator and escalator design in minutes
Schindler Plan is an easy-to-use online planning tool that makes it simple to configure your elevator or escalator in minutes. Good elevator or escalator design plays a critical role in the quality of life and work in multi-story buildings. Schindler Plan was developed to enable accurate escalator or elevator preparation early in a project’s life cycle.
For more information, including the location of the Schindler office nearest you, please visit:
U.S. Headquarters. Morristown, New JerseyTel. 973.397.6500www.us.schindler.com
Canada Headquarters. Toronto, OntarioTel. 416.332.8280www.ca.schindler.com
Schindler has received renewal to ISO 9001 and ISO 14001 certificates.
Schindler prints with vegetable-based ink on paper containing post-consumer waste fiber.
Schindler – We Elevate
