Schedule of Accreditation United Kingdom Accreditation Service · PDF file4705 Accredited to...
Transcript of Schedule of Accreditation United Kingdom Accreditation Service · PDF file4705 Accredited to...
Assessment Manager: GC Page 1 of 20
Schedule of Accreditation issued by
United Kingdom Accreditation Service
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
4705
Accredited to ISO/IEC 17065:2012 to provide product
conformity certification
UL International (UK) Ltd
Issue No: 025 Issue date: 01 March 2018
Wonersh House
The Guildway
Old Portsmouth Road
Guildford
Surrey
GU3 1LR
Contact: Mr Iman Bageri
Tel: +44 (0)1483 302130
Fax: +44 (0)1483 302230
E-Mail: [email protected]
Website: www.ul-europe.com
Locations where certification activities covered by the above Accreditation Standard are undertaken UL International (UK) Ltd. 220 Cygnet Court Centre Park Warrington WA1 1PP
4705
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
UL International (UK) Ltd
Issue No: 025 Issue date: 01 March 2018
Assessment Manager: GC Page 2 of 20
DETAIL OF ACCREDITATION
Product
Standard
Specific requirements for the assessment of fire protection to structural steel elements
BS ISO 834-11:2014
UL EU Voluntary Mark for Construction Products Flat glass, profiled glass and glass-block products (1/6)
: -
Flat or curved glass panels (for use in a glazed
assembly intended specifically to provide fire
resistance).
EN 12150-2:2004
EN 14179-2:2005
EN 14449:2005
EN 14449:2005/AC:2005
CCN: ENCB, ENCC, ENCD, ENCE
Flat glass, profiled glass and glass-block products (4/6)
: -
Flat or curved glass panels (for use as anti-bullet, or
anti-explosion glazing).
EN 12150-2:2004
EN 14179-2:2005
EN 14449:2005
EN 14449:2005/AC:2005
CCN: ENCB, ENCC, ENCD, ENCE
Fire stopping, fire sealing and fire protection products ETAG 026 - 1
ETAG 026 - 2 Version 08/2011
ETAG 026 - 3 Version 08/2011
CCN: ENCG
Fire Protective Products ETAG 018-1
ETAG 018-2 (2011) ETAG 018-3 (2013) ETAG
018-4 (2012)
CCN: ENCF
Fire Resistance Classification BS EN 13501-2:2007+A1:2009
BS EN 13501-3:2005+A1:2009
BS EN 13501-4: 2016
CCN: ENDB, ENDC
CO Alarms RV’s EN50291-1:2010
CO Alarms Domestic EN 50291-1:2010+A1:2012
4705
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
UL International (UK) Ltd
Issue No: 025 Issue date: 01 March 2018
Assessment Manager: GC Page 3 of 20
Product
Standard
Fire alarm/detection, fixed fire-fighting, fire and smoke
control and explosion suppression products (1/1)
Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1)
*EN 54-2:1997
EN 54-2:1997/A1:2006 EN 54-2:1997/AC:1999 CCN: ENGA
EN 54-3:2001 EN 54-3:2001/A1: 2002
EN 54-3:2001/A2: 2006 EN 54-3:2014 CCN: ENGB EN 54-4:1997 EN 54-4:1997/A1:2002 EN 54-4:1997/A2:2006 EN 54-4:1997/AC:1999 CCN: ENGC EN 54-5:2000 EN 54-5:2000/A1:2002 CCN: ENGD EN 54-7:2000 EN 54-7:2000/A1:2002 EN 54-7:2000/A2:2006 CCN: ENGE EN 54-10:2002 EN 54-10:2002/A1:2005 CCN: ENGF EN 54-11:2001 EN 54-11:2001/A1:2005 CCN: ENGG
EN 54-12:2015
CCN: ENGH
4705
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
UL International (UK) Ltd
Issue No: 025 Issue date: 01 March 2018
Assessment Manager: GC Page 4 of 20
Product
Standard
Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1)
EN54-13: 2005 EN54-13: 2017 CCN: ENGI
EN 54-16:2008
CCN: ENGJ EN 54-17:2005 EN 54-17:2005/AC:2007 CCN: ENGK EN 54-18:2005 EN 54-18:2005/AC:2007 CCN: ENGL EN 54-20:2006 EN 54-20:2006/AC:2008 CCN: ENGM EN 54-21:2006 CCN: ENGN EN 54-22:2015 CCN: ENGO EN54-23:2010 CCN: ENGP EN 54-24:2008
CCN: ENGQ
EN 54-25:2008 EN 54-25:2008/AC:2010 EN 54-25:2008/AC:2012
CCN: ENGR
4705
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
UL International (UK) Ltd
Issue No: 025 Issue date: 01 March 2018
Assessment Manager: GC Page 5 of 20
Product
Standard
Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1)
EN54-26:2015 CCN: ENGS EN54-27:2015 CCN: ENGT
EN54-28:2016 CCN: ENGU EN54-29:2015 CCN: ENGV EN54-30:2015 CCN: ENGW EN54-31:2014 EN54-31:2014+A1 CCN: ENGX
Building Hardware related to doors, gates and windows EN 1125:2008
EN 1154:1996/A1: 2002 EN 1154:1996/A1: 2002/AC: 2006 EN 1155:1996/A1: 2002/AC: 2006 EN 1155:1997/A1: 2002 EN 1158:1997/A1: 2002 EN 1158:1997/A1: 2002/AC: 2006 EN 12209:2003 EN 12209:2003/AC: 2005 EN 12209:2016 EN 179:2008 EN 1935:2002 EN 1935:2002/AC: 2003 EN 14351-1: 2006+ A2: 2016
END
4705
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
UL International (UK) Ltd
Issue No: 025 Issue date: 01 March 2018
Assessment Manager: GC Page 6 of 20
Accreditation for the purpose of Notified Body Activity taking into account EA2/17 and relevant requirements of ISO/IEC 17020, ISO17021 and ISO17025
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
The Construction Products Regulation (EU) No 305/2011
Annex V- Product Certification Body (AVCP) System 1
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1)
EN 12094-1:2003 EN 54-2:1997 EN 54-2:1997/A1:2006 EN 54-2:1997/AC:1999 EN 54-16:2008
Annex V- Product Certification Body (AVCP) System 1
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1)
EN 14604:2005 EN 14604:2005/AC:2008 EN 54-3:2014
Annex V- Product
Certification Body (AVCP) System 1
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1)
EN 54-4:1997 EN 54-4:1997/A1:2002 EN 54-4:1997/A2:2006 EN 54-4:1997/AC:1999
Annex V- Product
Certification Body (AVCP) System 1 *Under Article 46 of the The Construction Products Regulation (EU) No 305/2011, tests under this standard may be conducted away from the accredited test facilities
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1)
EN 54-5:2000/A1:2002 EN 54-7:2000/A1:2002 EN 54-7:2000/A2:2006 EN 54-10:2002 EN 54-10:2002/A1:2005 * EN 54-12:2015
4705
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
UL International (UK) Ltd
Issue No: 025 Issue date: 01 March 2018
Assessment Manager: GC Page 7 of 20
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
The Construction Products Regulation (EU) No 305/2011 (cont’d)
Annex V- Product Certification Body (AVCP) System 1
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1)
EN 54-7:2000/A1:2002 EN 54-7:2000/A2:2006
Annex V- Product
Certification Body (AVCP) System 1
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1)
EN 54-11:2001 EN 54-11:2001/A1:2005
Annex V- Product
Certification Body (AVCP) System 1
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1)
EN 54-17:2005 EN 54-17:2005/AC:2007
Annex V- Product
Certification Body (AVCP) System 1
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1)
EN 54-18:2005 EN 54-18:2005/AC:2007
4705
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
UL International (UK) Ltd
Issue No: 025 Issue date: 01 March 2018
Assessment Manager: GC Page 8 of 20
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
The Construction Products Regulation (EU) No 305/2011 (cont’d)
Annex V- Product Certification Body (AVCP) System 1
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1)
EN 54-20:2006 EN 54-20:2006/AC:2008
Annex V- Product
Certification Body (AVCP) System 1
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1)
EN 54-21:2006
Annex V- Product
Certification Body (AVCP) System 1
*Under Article 46 of
the The Construction Products Regulation (EU) No 305/2011, tests under this standard may be conducted away from the accredited test facilities
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1)
* EN 54-22:2015
Annex V- Product
Certification Body (AVCP) System 1
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1)
EN54-23:2010
4705
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
UL International (UK) Ltd
Issue No: 025 Issue date: 01 March 2018
Assessment Manager: GC Page 9 of 20
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
The Construction Products Regulation (EU) No 305/2011 (cont’d)
Annex V- Product Certification Body (AVCP) System 1
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1)
EN 54-24:2008 EN 54-25:2008 EN 54-25:2008/AC:2010 EN 54-25:2008/AC:2012
Annex V- Product
Certification Body (AVCP) System 1 *Under Article 46 of the The Construction Products Regulation (EU) No 305/2011, tests under this standard may be conducted away from the accredited test facilities
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1)
* EN54-26:2015
Annex V- Product
Certification Body (AVCP) System 1 *Under Article 46 of the The Construction Products Regulation (EU) No 305/2011, tests under this standard may be conducted away from the accredited test facilities
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1)
* EN54-27:2015
4705
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
UL International (UK) Ltd
Issue No: 025 Issue date: 01 March 2018
Assessment Manager: GC Page 10 of 20
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
The Construction Products Regulation (EU) No 305/2011 (cont’d)
Annex V- Product Certification Body (AVCP) System 1
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1)
EN54-28:2016
Annex V- Product
Certification Body (AVCP) System 1 *Under Article 46 of the The Construction Products Regulation (EU) No 305/2011, tests under this standard may be conducted away from the accredited test facilities
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1)
* EN54-29:2015
Annex V- Product Certification Body (AVCP) System 1 *Under Article 46 of the The Construction Products Regulation (EU) No 305/2011, tests under this standard may be conducted away from the accredited test facilities
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1)
* EN54-30:2015
4705
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
UL International (UK) Ltd
Issue No: 025 Issue date: 01 March 2018
Assessment Manager: GC Page 11 of 20
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
The Construction Products Regulation (EU) No 305/2011 (cont’d)
Annex V- Product Certification Body (AVCP) System 1 *Under Article 46 of the The Construction Products Regulation (EU) No 305/2011, tests under this standard may be conducted away from the accredited test facilities
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1)
* EN54-31:2014
Annex V- Product
Certification Body (AVCP) System 1 *Under Article 46 of the The Construction Products Regulation (EU) No 305/2011, tests under this standard may be conducted away from the accredited test facilities
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1) : - Smoke and heat exhaust ventilation systems-kits (fire safety).
* EN 15650:2010 * EN 12101-8:2011
4705
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
UL International (UK) Ltd
Issue No: 025 Issue date: 01 March 2018
Assessment Manager: GC Page 12 of 20
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
The Construction Products Regulation (EU) No 305/2011 (cont’d)
Annex V- Product Certification Body (AVCP) System 1 *Under Article 46 of the The Construction Products Regulation (EU) No 305/2011, tests under this standard may be conducted away from the accredited test facilities
99/93/EC Doors, windows, shutters, blinds, gates and related building hardware (1/1) : - Building hardware related to doors, gates and windows (fire/smoke compartmentation and on escape routes).
EN 1125:2008 EN 1154:1996/A1:2002 EN 1154:1996/A1:2002/AC:2006 EN 1155:1996/A1:2002/AC:2006 EN 1155:1997/A1:2002 EN 1158:1997/A1:2002 EN 1158:1997/A1:2002/AC:2006 EN 12209:2003 EN 12209:2003/AC:2005 EN 179:2008 EN 1935:2002 EN 1935:2002/AC:2003 * EN 16034:2014 * EN 1303:2015 * EN 14351-1:2006 (Excluding those with fire or smoke resistence) * PREN 14351-2:2009 (Excluding those with fire or smoke resistence) * EN 14846:2008
Annex V- Product
Certification Body (AVCP) System 1
2000/245/EC Flat glass, profiled glass and glass-block products (1/6) : - Flat or curved glass panels (for use in a glazed assembly intended specifically to provide fire resistance).
EN 1096-4:2004 EN 12150-2:2004 EN 12337-2:2004 EN 1279-5:2005+A2:2010 EN 13024-2:2004 EN 14178-2:2004 EN 14179-2:2005 EN 14321-2:2005 EN 14449:2005 EN 14449:2005/AC:2005 EN 1748-1-2:2004 EN 1748-2-2:2004 EN 1863-2:2004 EN 572-9:2004
4705
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
UL International (UK) Ltd
Issue No: 025 Issue date: 01 March 2018
Assessment Manager: GC Page 13 of 20
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
The Construction Products Regulation (EU) No 305/2011 (cont’d)
Annex V- Product Certification Body (AVCP) System 1
2000/245/EC Flat glass, profiled glass and glass-block products (4/6) : - Flat or curved glass panels (for use as anti-bullet, or anti-explosion glazing).
EN 1096-4:2004 EN 12150-2:2004 EN 12337-2:2004 EN 1279-5:2005+A2:2010 EN 13024-2:2004 EN 14178-2:2004 EN 14179-2:2005 EN 14321-2:2005 EN 14449:2005 EN 14449:2005/AC:2005 EN 1748-1-2:2004 EN 1748-2-2:2004 EN 1863-2:2004 EN 572-9:2004
Annex V- Product
Certification Body (AVCP) System 1
2000/245/EC Flat glass, profiled glass and glass-block products (1/6) : - Insulating glass units (for use in a glazed assembly intended specifically to provide fire resistance).
EN 1279-5:2005+A2:2010
Annex V- Product
Certification Body (AVCP) System 1
2000/245/EC Flat glass, profiled glass and glass-block products (4/6) : - Insulating glass units (for use as anti-bullet, or anti-explosion glazing).
EN 1279-5:2005+A2:2010
Annex V- Product
Certification Body (AVCP) System 1
98/213/EC Internal partition kits (1/5)
ETAG 003
4705
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
UL International (UK) Ltd
Issue No: 025 Issue date: 01 March 2018
Assessment Manager: GC Page 14 of 20
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
The Construction Products Regulation (EU) No 305/2011 (cont’d)
Annex V- Product Certification Body (AVCP) System 1
99/454/EC Fire stopping, fire sealing and fire protection products (1/2)
ETAG 026 - 1 ETAG 026 - 2 Version 08/2011 ETAG 026 - 3 Version 08/2011 ETAG 018 – 1 Version 27-06-2013 ETAG 018 – 2 Version 06-12-2011 ETAG 018 – 3 Version 27-06-2013 ETAG 018 – 4 Version 11-01-2012
Annex V- Product
Certification Body (AVCP) System 1
99/454/EC Fire stopping, fire sealing and fire protective products (2/2)
ETAG 026 - 1 ETAG 026 - 2 Version 08/2011 ETAG 026 - 3 Version 08/2011
Annex V- Product
Certification Body (AVCP) System 1
96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression products (1/1)
EN 12259- 1:1999+A1:01/A2:04 EN 12259-1:1999+A1:01/A3:06 EN 12259-2:1999/A1:2001 EN 12259-2:1999/A2:2005 EN 12259-2:1999/AC:2002 EN 12259-3:2000/A1:2001 EN 12259-3:2000/A2:2005
Annex V- Product
Certification Body (AVCP) System 1
97/808/EC Floorings (2/2) : - Resilient and textile floorings - homogeneous and heterogeneous resilient floor coverings supplied either in tile, sheet or roll form (textile floor covering including tiles; plastic and rubber sheets (aminoplastic thermosetting floorings); linoleum and cork; anti-static sheet; floor loose laid tiles; resilient laminated floorings) (for internal uses).
EN 14041:2004 EN 14041:2004/AC:2006
4705
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
UL International (UK) Ltd
Issue No: 025 Issue date: 01 March 2018
Assessment Manager: GC Page 15 of 20
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
The Construction Products Regulation (EU) No 305/2011 (cont’d)
Annex V- Product Certification Body (AVCP) System 1
97/808/EC Floorings (2/2) : - Rigid flooring products<BR>(a) Components: paving units, tiles, mosaics, parquet, decking of mesh or sheet, floor gratings, rigid laminated floorings, wood based products (for internal uses including enclosed public transport premises).
EN 14342:2005+A1:2008
Annex V- Product
Certification Body (AVCP) System 1
Fixed fire fighting systems: Pillar fire hydrants
EN14384:2005
Annex V- Product
Certification Body (AVCP) System 1
Smoke and Heat Control Systems. Part 7: Smoke Duct Sections
EN 12101-7:2011
Annex V- Product
Certification Body (AVCP) System 1
Fire Classification of Construction Products and Building Elements. Part 4: Classification using data from fire resistance tests on Components of Smoke Control Systems.
EN 13501-4:2016
4705
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
UL International (UK) Ltd
Issue No: 025 Issue date: 01 March 2018
Assessment Manager: GC Page 16 of 20
Directive / Regulation
Conformity Assessment procedure/ Module/article
Category of products or individual products
Essential requirements: Product specification /
Properties/Standards
The Construction Products Regulation (EU) No 305/2011 (cont’d)
As a Technical Assessment Body (TAB) for developing European Assessment Documents
Annex IV –Product Areas
2 Doors, windows, shutters, gates and related building hardware 10 Fixed fire fighting equipment (fire alarm/detection, fixed fire fighting, fire and smoke control and explosion suppression product)
21 Internal and external wall and
ceiling finishes. Internal partition kits
30 Flat glass, profiled glass and
glass block products 35 Fire stopping, fire sealing, fire
protective products and fire retardant products
4705
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
UL International (UK) Ltd
Issue No: 025 Issue date: 01 March 2018
Assessment Manager: GC Page 17 of 20
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Personal Protective Equipment 89/686/EEC Implemented in UK Law by: The Personal Protective Equipment Regulations 2002 (SI 2002/1144) (EU) 2016/425 Personnel Protective Equipment Regulation
Articles: 10 EC type-examination 11A EC quality control system for the final product 11B System for ensuring EC quality of production by means of monitoring Module B EU-type examination Module C2 Conformity to type based on internal production control plus supervised product checks at random intervals Module D Conformity to type based on quality assurance of the production process
• Equipment providing face protection
Basic Health and Safety requirements Annex II of the Directive and Schedule II of the
Regulations Essential Health and Safety requirements Annex II of the (EU) 2016/425 Regulation.
• Equipment providing eye protection
• Equipment providing foot and Leg protection
• Equipment providing general body protection (clothing)
• Equipment providing hand and arm protection
• Equipment providing head protection
• Protective equipment against chemical agents
• Protective
equipment against drowning and buoyancy aids
• Protective equipment against falls from height
4705
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
UL International (UK) Ltd
Issue No: 025 Issue date: 01 March 2018
Assessment Manager: GC Page 18 of 20
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
Personal Protective Equipment 89/686/EEC Implemented in UK Law by: The Personal Protective Equipment Regulations 2002 (SI 2002/1144) (EU) 2016/425 Personnel Protective Equipment Regulation
Articles: 10 EC type-examination 11A EC quality control system for the final product 11B System for ensuring EC quality of production by means of monitoring Module B EU-type examination Module C2 Conformity to type based on internal production control plus supervised product checks at random intervals Module D Conformity to type based on quality assurance of the production proces
• Protective equipment against cold [cold > -50°C]
Basic Health and Safety requirements Annex II of the Directive and Schedule II of the Regulations Essential Health and Safety requirements Annex II of the (EU) 2016/425 Regulation.
• Protective equipment against cold [extreme cold < -50°C]
• Protective equipment against heat [heat > 100°C and fire flame]
• Protective equipment against heat [heat < 100°C]
• Protective equipment against mechanical risks
• Protective clothing against static electricity
• Protective clothing for use in potentially explosive atmospheres
• Protective
equipment against knife cuts
4705
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
UL International (UK) Ltd
Issue No: 025 Issue date: 01 March 2018
Assessment Manager: GC Page 19 of 20
Directive / Regulation
Conformity Assessment procedure/
Module/article
Category of products or individual products
Essential requirements: Product specification / Properties/Standards
(EU) 2016/425 Personnel Protective Equipment Regulation (cont’d)
• Protective clothing for firemen
Basic Health and Safety requirements Annex II of the Directive and Schedule II of the Regulations Essential Health and Safety requirements Annex II of the (EU) 2016/425 Regulation.
• Protective equipment for firemen
• Protection against handheld chainsaws
• Protection
against Non Ionising Optical Radiation
• Protection against Electrical Risks
• Protection against Welding and Allied Processes
Machinery Directive (2006/42/EC) Implemented in UK Law by: Supply of Machinery (Safety) Regulations 2008 (SI 2008/1597)
Annex IX: EC type-examination Annex X: Full quality assurance
19. Protective devices designed to detect the presence of persons. 20. Power-operated interlocking movable guards designed to be used as safeguards in machinery referred to in points 9, 10 and 11. 21. Logic units to ensure safety functions.
4705
Accredited to ISO/IEC
17065:2012 to provide product conformity certification
Schedule of Accreditation issued by
United Kingdom Accreditation Service 2 P ine Trees , Cher t sey Lane, S ta i nes -upon-Thames , TW 18 3HR, UK
UL International (UK) Ltd
Issue No: 025 Issue date: 01 March 2018
Assessment Manager: GC Page 20 of 20
Directive / Regulation
Conformity Assessment procedure/ Module/article
Category of products or individual products
Essential requirements: Product specification /
Properties/Standards
Marine Equipment Directive 2014/90/EU (as amended) Implemented in UK Law by: The Merchant Shipping (Marine Equipment) Regulations 2016*
Chapter 4, Article 15 & Annex II Module B: EC Type Examination Module D: Production QA Module E: Product QA Module F: Product Verification
Life Saving Appliances MED 1.1 MED 1.4 to MED 1.7
** Implementing Acts (Article 35(2)) & Commission Regulation (Article 35(5)) via Article 40 concept of Directive 2014/90/EU Process 27-MD-P0852
Fire Protection MED 3.3 MED 3.5
Note: The inspection of items marked thus * are subject to legislative requirements including the
appointment of ‘persons or bodies’ to carry out conformity assessment. Reference should be made to the relevant Government Departments (MCA for Marine Equipment Directive) for information on this and listings of bodies recognised under UK legislation
END