SCH8-LED Architectural LED Downlight Warm Dim 30K-18K · SCH8-LED DESCRIPTION: 8” SCH8-LED Warm...
5
SCH8-LED DESCRIPTION: 8” SCH8-LED Warm Dim LED Architectural Cylinder . Available with Downlight, and Wall Wash Trims. Available in Ceiling Mount, Pendant Mount, Suspended Mount, Wall Mount with only Downlight and Wall Mount with Up & Downlight mounting options. PERFORMANCE: Operating system delivers 900, 1200, 1500 & 2000 lumens. All MAXILUME LED Warm Dim Architectural Downlights maintain a CRI of 90+ across the Dimming range of 3000K to 1800K and are binned to within 2 MacAdam ellipse . Elite’s highly selective LED diodes produce zero ultraviolet and virtually no infrared light. OPTICS: MAXILUME LED Optilux technology combines unmatched performance with visual comfort. Spun 0.05” thick 1-step anodized self flanged reflector. Reflector offers a 45-55 degree cutoff and comes standard with smooth frost Solite diffuser distributes that light even throughout the workplace in 3 different distribution; Wide (WD), Medium (MD) and Narrow (ND). THERMAL MANAGEMENT SYSTEM: Proprietary cooLED Advanced Thermodynamic Design, Die-cast aluminum heat sink is attached to top of reflector. The LED light engine is attached to the die-cast heat sink and is easily replaceable and upgradeable. BODY - Post painted die-formed construction for maximum heat dissipation and rust protection. Available in Matte White, Black, Silver, and Bronze finish. MOUNTING BRACKET - Ceiling mount bracket provided for direct installation with 3-1/4” to 4” octagonal and square junction box. Pendant mount option is available and supplied with 10-1/2” stem and 5” diameter canopy cover. Ideal for slope applications up to 45 degrees. Suspended mount option is also available supplied with aircraft adjustable cable. LED DRIVER/JUNCTION BOX: LED driver may be only serviced from above the ceiling and must be remote mounted. Available with remote mount Emergency (EMG-LED) push button. LISTING: c-UL-us - listed for Damp location & feed Through Wiring. LM79 / LM80 U.S Patent No. - D685,118S All LED luminaires are rated and tested to LM-79 and LM-80 standards by an independent laboratory. DIMMABLE - The MAXILUME LED system is shipped standard with a 0-10V driver which can be dimmed down to 1% of initial light output with a 0-10V dimmer when ordered withthe following options (DIM10-120, DIM10-277). Fixtures can also be shipped with a Lutron Hi-lume A series driver which can be dimmed with Lutron Dimming Systems when orderedwith the following options (LUTH-120, LUTH-277), Lutron® Hi-Lume A-Series (LUT2W-120) 2-Wire Forward Phase Control 1% Dimming in 120V. Triac & Electronic Low Voltage dimming driver also available when ordered with the following options (DIMTR-120). DIMMING INFORMATION DIM10 (0-10V 1% Dimming) DIMTR (Triac & Electronic Low Voltage Dimming in 120V only) LUTH (Lutron® Hi-Lume A-Series 3-Wire or Eco System 1% Dimming) LUT2W (Lutron® Hi-Lume A-Series 2-Wire Forward Phase Control 1% Dimming in 120V) OUR WORD - MAXILUME LED system features 70% lumen maintenance at 50,000hrs of life and carries a five-year carefree warranty for parts and components. (Labor not included) 13” 9-3/8” 26 8 ” TUNABLE WHITE SERIES Cylinder Architectural LED Downlight 2 5 8 " 3 3 4 " WARM DIM Warm Dim with Smart Dim technology mimics traditional incandescent halogen lighting through dimming. Using Warm Dim, luminaires dim smoothly from 3000K to 1800K. Warm Dim shifts smoothly over the black body radiator curve as the light dims you move into the rich amber tones that encourages relaxation. It is ideal for hospitality, architectural as well as residential applications, all while maintaining high lumen output for the most stringent energy codes today’s legislation requires. Warm Dim comes pared with high CRI of 90+ and superior lumen output. Warm Dim 30K-18K 3000K 3000K 2700K 2700K 2000K 2000K 2500K 2500K 1800K 1800K Black Body Dimming Color temperature warms from 3000K - 1800K while staying on the Black Body Locus when dimming Elite Lighting’s Architectural Lighting Luminaries with Black Body Technology mimic traditional Halogen dimming to help create a warm ambiance.
Transcript of SCH8-LED Architectural LED Downlight Warm Dim 30K-18K · SCH8-LED DESCRIPTION: 8” SCH8-LED Warm...
SCH8-LED
DESCRIPTION: 8” SCH8-LED Warm Dim LED Architectural Cylinder . Available with Downlight, and Wall Wash Trims. Available in Ceiling Mount, Pendant Mount, Suspended Mount, Wall Mount with only Downlight and Wall Mount with Up & Downlight mounting options.
PERFORMANCE: Operating system delivers 900, 1200, 1500 & 2000 lumens. All MAXILUME LED Warm Dim Architectural Downlights maintain a CRI of 90+ across the Dimming range of 3000K to 1800K and are binned to within 2 MacAdam ellipse . Elite’s highly selective LED diodes produce zero ultraviolet and virtually no infrared light.
OPTICS: MAXILUME LED Optilux technology combines unmatched performance with visual comfort. Spun 0.05” thick 1-step anodized self flanged reflector. Reflector offers a 45-55 degree cutoff and comes standard with smooth frost Solite diffuser distributes that light even throughout the workplace in 3 different distribution; Wide (WD), Medium (MD) and Narrow (ND).
THERMAL MANAGEMENT SYSTEM: Proprietary cooLED Advanced Thermodynamic Design, Die-cast aluminum heat sink is attached to top of reflector. The LED light engine is attached to the die-cast heat sink and is easily replaceable and upgradeable.
BODY - Post painted die-formed construction for maximum heat dissipation and rust protection. Available in Matte White, Black, Silver, and Bronze finish.
MOUNTING BRACKET - Ceiling mount bracket provided for direct installation with 3-1/4” to 4” octagonal and square junction box. Pendant mount option is available and supplied with 10-1/2” stem and 5” diameter canopy cover. Ideal for slope applications up to 45 degrees. Suspended mount option is also available supplied with aircraft adjustable cable.
LED DRIVER/JUNCTION BOX: LED driver may be only serviced from above the ceiling and must be remote mounted. Available with remote mount Emergency (EMG-LED) push button.
LISTING:c-UL-us - listed for Damp location & feed Through Wiring.LM79 / LM80 U.S Patent No. - D685,118S
All LED luminaires are rated and tested to LM-79 and LM-80 standards by an independent laboratory.
DIMMABLE - The MAXILUME LED system is shipped standard with a 0-10V driver which can be dimmed down to 1% of initial light output with a 0-10V dimmer when ordered withthe following options (DIM10-120, DIM10-277). Fixtures can also be shipped with a Lutron Hi-lume A series driver which can be dimmed with Lutron Dimming Systems when orderedwith the following options (LUTH-120, LUTH-277), Lutron® Hi-Lume A-Series (LUT2W-120) 2-Wire Forward Phase Control 1% Dimming in 120V. Triac & Electronic Low Voltage dimming driver also available when ordered with the following options (DIMTR-120).
DIMMING INFORMATIONDIM10 (0-10V 1% Dimming)DIMTR (Triac & Electronic Low Voltage Dimming in 120V only)LUTH (Lutron® Hi-Lume A-Series 3-Wire or Eco System 1% Dimming)LUT2W (Lutron® Hi-Lume A-Series 2-Wire Forward Phase Control 1% Dimming in 120V)
OUR WORD - MAXILUME LED system features 70% lumen maintenance at 50,000hrs of life and carries a five-year carefree warranty for parts and components. (Labor not included)
13”
9-3/8”
26
8”
TUNABLE WHITE SERIES
Cylinder
Architectural LED Downlight
2 58 "
3 34 "
WARM DIM
Warm Dim with Smart Dim technology mimics traditional incandescent halogen lighting through dimming. Using Warm Dim, luminaires dim smoothly from 3000K to 1800K. Warm Dim shifts smoothly over the black body radiator curve as the light dims you move into the rich amber tones that encourages relaxation. It is ideal for hospitality, architectural as well as residential applications, all while maintaining high lumen output for the most stringent energy codes today’s legislation requires. Warm Dim comes pared with high CRI of 90+ and superior lumen output.
Warm Dim 30K-18K
Smart Dim
3000K
3000K2700K
2700K
2000K
2000K
2500K
2500K
1800K
1800K
Black Body Dimming Color temperature warms from 3000K - 1800K while staying on the Black Body Locus when dimming
Elite Lighting’s Architectural Lighting Luminaries with Black Body Technology mimic traditional Halogen dimming to help create a warm ambiance.
SCH8-LED
Trims
8”
27TUNABLE WHITE SERIES
Reflector with Diffuse Lens
HH8-8501 HH8-8528 (BZ)Reflector with Aluminum Disk & Diffuse Lens- Bronze
Double Wall Wash Reflector with Diffuse Lens
HH8-8577 HH8-8528 (AL)Reflector w/ Aluminum Disk & Diffuse Lens- Aluminum
HH8-8528 (WH)Reflector with Aluminum Disk & Diffuse Lens-White
HH8-8507Wall Wash Reflector with Diffuse Lens
HH8-8522Euro Deco Ring Glass with Diffuse Lens
HH8-8511Triple Ring Glass Reflector with Diffuse Lens
HH8-8525Central Etched Float Glass with Diffuse Lens
HH8-8523Prismo Deco Ring Glass with Diffuse Lens
HH8-8521Standard Ring Glass Reflector with Diffuse Lens
Deco Glass Reflector with Diffuse Lens
HH8-8509
TYPE FINISH CCT LUMENS DRIVER VOLTAGE OPTICS EMERGENCY TRIM TYPE REFLECTOR/RING FINISH
WAR
M D
IM
SCH8-LED o WH-WHITEo BK-BLACKo BZ- BRONZEo SI-SILVER
o WDM-30K-18K o 900Lo 1200Lo 1500Lo 2000L
o 120o 277
o ND (Narrow)o MD (Medium)o WD (Wide)
o EMG-LEDTypical lumen output of the fixture is up to 1000L in emergency mode. Contact the factory for details.
o HH8-8501o HH8-8507o HH8-8509o HH8-8511o HH8-8525o HH8-8528o HH8-8577
o CL-WHo CL-SCHo SHZ-SHZo SHZ-WHo W-WHo MB-WHo WT-WH
MOUNTING
o CM-Ceiling Mounto WM-Wall Mounto UWM-Up/downlight Wall Mounto PM12-12” Pendant Mounto PM18-18” Pendant Mounto PM24-24” Pendant Mounto PM36-36” Pendant Mounto PM48-48” Pendant Mounto SM-10’ Suspended Mount (Consult factory for other sizes)
SCH8-LED-WDM-30K-18K-2000L-120-MD-HH8-8501-CL-WH TEST NO.: EL-031637INPUT WATTS: 34.6 LUMENS: 2070 CRI: 90+ CCT: 30K-18K SPACING CRITERIA: 0.48
Candle Power Distribution (Candelas)
RC - Ceiling Cavity Reflectance RW - Wall Reflectance
RO
OM
CA
VITY
RA
TIO
Coefficients of Utilization - Zonal Cavity MethodEffective Floor Cavity Reflectance 0.20
Zonal Lumens Summary
0Candela TabulationLumens Per Zone
Zone Lumens
0-10 170.4510-20 443.8220-30 564.6930-40 508.6740-50 282.7950-60 91.5060-70 28.8670-80 6.4780-90 2.05
Luminance (Average candela/M2)Anglein Degrees
Average0º
Average45º
Average90º
45 6172 4004 1169155 1014 1023 190565 204 283 99575 132 239 28885 83 509 63585 484 1307 1898
0 1853.355 1819.6415 1587.7825 1215.4335 807.6545 281.1755 72.0265 12.4675 4.0685 0.7790 0.14
RC 80% 70% 50% 30% 10% 0%RW 70% 50% 30% 10% 70% 50% 30% 10% 50% 30% 10% 50% 30% 10% 50% 30% 10% 0%
0 121 121 121 121 118 118 118 118 113 113 113 108 108 108 104 104 104 1021 116 113 110 108 113 111 108 106 106 105 103 103 101 100 99 98 97 952 110 105 101 98 108 104 100 97 100 97 95 97 95 93 94 93 913 105 98 94 90 103 97 93 89 94 91 88 92 89 86 90 87 85 834 100 92 87 83 98 91 86 82 89 85 81 87 83 80 85 82 79 785 95 87 81 77 93 86 81 77 84 79 76 82 78 75 81 77 75 736 91 82 76 72 89 81 76 72 80 75 71 78 74 71 77 73 70 697 86 77 72 67 85 77 71 67 75 70 67 74 70 67 73 69 66 658 83 73 68 64 81 73 67 63 72 67 63 71 66 63 70 66 63 619 79 70 64 60 78 69 64 60 68 63 60 67 63 60 66 62 59 58
10 76 66 61 57 75 66 60 57 65 60 57 64 60 57 64 59 56 55
Zone Lumens %Lamp %Fixt
0-20 614.27 29.40 29.300-30 1178.95 56.50 56.200-40 1687.62 80.80 80.400-60 2061.92 98.80 98.200-80 2097.24 100.50 99.900-90 2099.29 100.60 100.00
90º
80º
70º
60º
50º
40º
30º 20º
10º
Cone of Light
BEAM DIA. MEASURED AT 50% OF NADIR F.C.
Distance to Plane
Initial Footcandle at
NadirBeam
diameter
4.0 298 2.0 ft
8.0 74.5 4.0 ft
12.0 33.1 6.0 ft
16.0 18.6 8.0 ft
20.0 11.9 10.0 ft
24.0 8.28 12.0 ft
1192
2384
3575
4767
o DIMTRo DIM10o LUTECOo LUT2Wo DMX-512o DMX-RDMo DALI
Due to the changes of constant improvement in LED technology, all details are subject to change without notice. Consult factory for up to date information.
61 62
8”
8” LED CONTROL OPTIONS6
IN
CH
A
RC
HIT
EC
TU
RA
L
HIG
H
LU
ME
N
PH
OT
OM
ET
RY
Controls Provided by EnOcean
EOSCUOccupancy Sensor
Ceiling Mount
EOSWUOccupancy Sensor
Wall Mount
ELLSUDaylight SensorCeiling Mount
ESRPU/ EDRPUWall Switches
LEVITONWall Switches
902 MHz category
WSS0S-S9WWSS0S-D9W
NWC 300UNavigan Wireless
Commissioner
LEDDULED Zone
Controller 0-10V
LEDRULED Relay Zone Controller 0-10V
Self-powered sensors and switches, combined with LED fixture controllers and a commissioning tool, permit easy configuration, intelligent local control, and seamless integration into building automation systems.
Controls Options to be Installed on the Fixture
Philips EasySense sensors provide luminaire-level control with Occupancy sensing, Daylight harvesting, and Field task tuning.
Controls Provided by Philips
Philips Field App
Controls Installed on the Fixture
SRB + SNS200-CMPFixture Will be Shipped Sensor Ready with PHILIPS SRB Bridge and EasySense SNS200-CMP Sensor which is Included to be Remote Mounted. Fixture May Only be Controlled with Philips Field App or Wireless Switches or any 0-10V. Wall Box Dimmer.
SRBFixture will be Shipped Sensor Ready with SRB Bridge. Fixture will be Compatible with EasySense Sensor SNS200-CMP which can be Added in the Field for Remote Mounting. Fixture May Only be Controlled with Philips Field App or Wireless Switches or any 0-10V. Wall Box Dimmer. Illumra Wireless Switches
ZBT-S1AWH ZBT-S2AWH
Enlighted Smart Sensors features digital motion, ambient light, and temperature sensing, the device provides autonomous fixture-level control
Controls Installed on the Fixture
Controls Providedby Enlighted
Energy Manager
PoE Network Switch
Programmable with Laptop
Gateway
Switch
WS-2-00Enlighted Room
Controller
CU-E3-1RFixture Will be Shipped Sensor Ready with Enlighted CU-E3-1R Control Unit Power Pack. Fixture will be be compatible with Enlighted SU-4E-00 Sensor which can be Added in the Field Remote Mounting. Fixture May be Controlled with Enlighted Gateway, Energy Manager or Enlighted Room Controller WS-2-00
CU-E3-1R + SU-4E-00Fixture Will be Shipped with Enlighted Enlighted CU-E3-1R Control Unit Power Pack installed and SU-4E-00 Sensor provided (to be installed remotely). Fixture May be Controlled with Enlighted Gateway, Energy Manager or Enlighted Room Controller WS-2-00
Due to the changes of constant improvement in LED technology, all details are subject to change without notice. Consult factory for up to date information.
61 62
8”
8” LED CONTROL OPTIONS6
IN
CH
A
RC
HIT
EC
TU
RA
L
HIG
H
LU
ME
N
PH
OT
OM
ET
RY
ZL027-N0WPower control module
ZLDNK-4W ZLDNK-8WIntellect™ Keypad Room
Controller (Required)
ZLDNK-1W ZLDNK-2W
Leviton Keypad
Leviton App
Neuron App
Fixture will be shipped with Leviton ZL027-N0W power control module installed on the fixture. Fixtures will be compatible with Leviton ZL00J-D0W sensor control module which can be added in the field for remote mounting. Fixture must be controlled with Leviton Intellect Keypad Room Controller, or Leviton Neuron App.
ZL00J-D0WSensor control module
Controls Provided by Lutron
Ceiling Mount Occupancy Sensor
Ceiling Mount Occupancy/Daylight
Sensor
Wall Mount Occupancy Sensor
Wall Mount Switch
Pico Remote
DayLight Sensor
Vive Wireless Hub
Controls Installed on the Fixture
Fixture Will be Shipped LUTRON VIVE Enabled with LUTRON FCJS-010 0-10V Control Module Installed on theFixture. Fixtures will be compatible with Lutron FC-SENSOR Occupancy/Daylight Sensor or FC-VSENSORVacancy/Daylight Sensor which canbe Added in the Field for RemoteMounting. Fixture May be Controlled with any Vive control systems. Fixtures must be ordered with a 0-10V. Driver.
Fixture Will be Shipped LUTRON VIVE Enabled with LUTRON FCJS-ECO EcoSystem Control Module Control Module Installed on the Fixture. Fixtures will be compatible with Lutron FC-
SENSOR Occupancy/Daylight Sensor or FC-VSENSOR Vacancy/Daylight Sensor which can be Added in the Field for Remote Mounting. Fixture May be Controlled with any Vive control systems. Fixtures must be ordered with a Lutron Driver.
FCJS-010Individual
Fixture Control
FCJS-ECOIndividual
Fixture Control
LutronApp
Controls Installedon the Fixture
LMFC-011Fixture Will be Shipped Legrand Wattstopper DLM Enabled with LMFC-011 Module Controller Installed on the Fixture. Fixtures will be compatible with Legrand Wattstopper DLM Load Controllers, DLM Sensors, DLM Switches, DLM Remote Control, and DLM Configuration tool.
WATTSTOPPER®
Switches
LMSW-105 LMDM-101
Remote
LMRH-105
Configuration tool
LMCT-100-2
Plug Load Controllers
LMPL-101 LMPL-201
Sensors
LMDC-100 LMLS-400 LMLS-500
40TUNABLE WHITE SERIES
6”HH6-LEDWarm Dim
WDM-30K-18K
Neutral White
Black Black
Violet(+)
Gray(-)
White
Black Control
Black
□ Violet(+)
Gray(-)
Violet(+)
Gray(-)
To Additional Drivers
