SCE Guide Trainer Packages - Home page english … · 2016-03-21 · SCE Guide Trainer Packages...
Transcript of SCE Guide Trainer Packages - Home page english … · 2016-03-21 · SCE Guide Trainer Packages...
Unrestricted / © Siemens AG 2013. All Rights Reserved. siemens.com/sce
SCE Guide Trainer Packages
Siemens Automation Cooperates with Education (SCE)
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 2 Industry Sector
Siemens Automation Cooperates with Education (SCE)
The Siemens SCE program offers a system for sustainable educational support which is unique worldwide.
As a technology leader, we support educational and R&D institutions with our excellent industrial know-how and a specific
range of services. We support secondary and tertiary education, as well as initial non commercial training departments in
the field of automation and drive technology.
Through cooperative partnerships, we help educators to plan their classes in a
targeted, practice-oriented manner and in compliance with the curriculum.
Overview of SCE services
• SCE Curriculums for classes
• SCE Trainer Packages for practice-oriented education
• SCE Courses for providing up-to-date technical knowledge
• SCE Support for your projects/technical books
• Complete Didactic Solutions from our partners
• SCE Contact Partner for individual support SCE homepage siemens.com/sce
Overview / List / Graphic / Cabinet
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 3 Industry Sector
SCE Trainer Packages for Trainers and Educators
SCE Trainer Packages are specially compiled hardware and software packages at special prices for up-to-date
educational content in automation and drive technology.
> 80 Trainer Packages for practice-oriented education
• Innovative hardware/software components incl. complete accessories
• Completely and functionally coordinated with one another in terms of content
• Low-cost original industrial components for classes
• Perfectly coordinated with SCE teaching material and aligned with
teaching curriculums/content
• Innovative trends taken into account
SCE Trainer Packages siemens.com/tp
SCE Curriculums siemens.com/module
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 4 Industry Sector
Why do we provide SCE Trainer Packages?
Assembling individual products requires a lot of know-how and is time-consuming. We therefore mapped the relevant
configurations from practical educational use in SCE packages for you.
Who are these Trainer Packages for?
• For research, development and educational institutes
• For partners such as didactic OEM companies which integrate these
SCE Trainer Packages into a didactic solution.
• For industrial and corporate initial training – with the exception
of three STEP 7 Trainer Packages (see page 131).
What should be considered when using Trainer Packages?
The products listed may be subject to European/German and/or
US export regulations.
The notes on the Trainer Packages must also be observed.
To the notes Here
Overview / List / Graphic / Cabinet
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 5 Industry Sector
Trainer Packages – Overview
SIMATIC Software STEP 7 • Overview STEP 7 and SIMATIC HMI
• Single-user license V12
• 12-Classroom license V12
• 12-Classroom upgrade-license V12
• Software for students V12
• PID Control with SIMATIC standard
• PID Control with SIMATIC modular
• CFC 12-Classroom license
• CFC Software for students
• IE Softnet 12-Classroom license
Quick Start into Automation • SCE Application Center
• S7-312 PLC Hardware-Set to Application Center
• SIMIT SCE Simulation
Micro Automation • LOGO! 12/24V / LOGO! 230V / USB-Cable
• LOGO! 12/24V / LOGO! 230V (ETHERNET)
• Basic Panels KTP400 for LOGO!
• S7-1200 PLC
• Basic Panels KTP600 for S7-1200
• Upgrade STEP 7 V12 Basic for S7-1200 Package
Process Automation • Process control system PCS 7 3er License/Upgrade
• Process control system PCS 7 6er License
• Process control system PCS 7 AS RTX Box
SIMATIC PLCs and Peripheries • S7-1513 PN
• S7-1516 PN/DP
• S7-314C-2PN/DP / S7-314C-2PN/DP (Upgrade)
• S7-315F-2PN/DP
• S7-300 Safety I/O
• ET 200S PLC IM151-8 F PN/DP
• ET 200S PN
• ET 200S Safety I/O
• S7-315T Technology
• SIMATIC Embedded PLC
• Soft-SPS WinAC F RTX 2010
Sensor Technologies • SIMATIC VS120 Vision Sensor
• SIMATIC VS130-2 Code Reader
• SIMATIC RF 200/300 RFID System
• SIWAREX weighing systems
SIMATIC NET • SINEMA Network Monitoring Software
• CP343-1 Advanced
• Switch X208
• Security Switch
• IWLAN
• FASTCONNECT Accessories Kit
• Development Kit
Drive Technologies • SINAMICS G120 Standard drive
• SINAMICS S120 Servo drive
• SIMOTION D410 add on for S120
HMI (Human Machine Interface) • Overview STEP 7 and HMI
• WinCC Advanced V12 / WinCC flexible 2008
• WinCC Advanced V12 / WinCC flexible 2008
Software for students
• SIMATIC HMI TP700 COMFORT PANEL
• WinCC V7 6er License
• Upgrade WinCC V7 6er License
• WinCC/Web Navigator V7 6er License
• Upgrade WinCC/Web Navigator V7 6er License
• WinCC/Web Navigator V7 ASIA 6er
CNC-Software SinuTrain
Energy Efficiency
NEW
*
Overview / List / Graphic / Cabinet
Additional • Industrial Controls
• Product Lifecycle Management (PLM)
• WorldSkills
• Trainer Packages Purchasing Remarks
• Trainer Packages General Regulations
TIA Portal siemens.com/tia-portal/details
* * * *
*
*
* * * *
*
* *
*
New / updated Packages Packages in preparation * *
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 6 Industry Sector
SCE List Trainer Packages including Order Number
SCE List Trainer Packages Here
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 7 Industry Sector
Process automation SIMATIC PCS 7
SIMATIC Software (STEP 7)
Trainer Packages – Graphic
ET 200S - CPU - IM 151-3PN
S7-1513 PN S7-1516 PN/DP S7-314C PN/DP S7-315F Controller PROFINET
+
CP343-1Adv.
S7-314C S7-300T Controller
Micro Automation • LOGO! • S7-1200 PLC • Panels S7-1200 / LOGO!
SIMATIC Embedded Controller
CNC-Software SinuTrain
Win AC
• SINEMA • CP343-1 Advanced • Switch X208 • Security Switch • IWLAN • FASTCONNECT Kit • Development Kit
SIMATIC RF300/200
SIMATIC VS 120 Form Check
SIMATIC VS130-2
1D/2D Code Reading
HMI
PROFIBUS
PROFINET
WinCC Prof.
WinCC Advanced
Drive Technologies SINAMICS
Quickstart into automation • ACC • Hardware set (S7-312) • SIMIT SCE Simulation Sensor Technologies
Weighing systems SIWAREX
SIMATIC PLCs/Peripheries
Energy Efficiency *
NEW
SIMATIC NET
Overview / List / Graphic / Cabinet
Additional • Industrial Controls
• Trainer Packages Purchasing Remarks
• Trainer Packages General Regulations
TP700
TIA Portal siemens.com/tia-portal/details New / updated Packages Packages in preparation * *
* * *
* *
*
* *
*
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 8 Industry Sector
Solution Partner Workshop cabinet with SCE Trainer Packages
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 9 Industry Sector
Energy Efficiency
• Overview
• Trainer Packages
• Basic Information
Overview / List / Graphic / Cabinet
Training curriculums siemens.com/sce/modules
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 10 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
Energy Efficiency
Basic Information
Definition of Energy Management in the Industry
Energy Services
Services for optimization of the
entire value chain from energy
production till the consumer.
Energy Management System
Technical System to measure,
analyze, document and
visualization of the energy profile
as well as monitoring and control
of the energy usage in factories
and buildings.
Energy Efficiency means the
reduction of energy, without the
reduction of the usage of the
factory and the equipment.
Energy Efficiency
Energy Management helps companies to continuously and systematically measure, analyze and improve
the usage of energy. Within this optimizing process. Economical, technical as well as legal aspects need
to be taken into consideration.
Overview / List / Graphic / Cabinet
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 11 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
Energy Efficiency
Trainer Packages Overview
More in Internet Here
In Preparation
Overview / List / Graphic / Cabinet
SW Sentron * powermanager
Sentron PAC 4200 *
Sizer * Selection of Energy Efficient Motors
ProfiEnergy*
New / updated Packages Packages in preparation * *
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 12 Industry Sector
Engineering Software
• Overview
• Overview STEP 7 and SIMATIC HMI
• Single-user license
• 12-Classroom License
• 12-Classroom upgrade-license
• PID Control with SIMATIC standard
• PID Control with SIMATIC modular
• CFC 12-Classroom License
• CFC Software for students
• IE Softnet 12-Classroom License
• Software for students
Overview / List / Graphic / Cabinet
Training curriculums siemens.com/sce/modules
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 13 Industry Sector
Trainer Packages
Overview structure STEP 7 and SIMATIC HMI
SIMATIC Software - STEP 7 as the Basis
Engineering tools for STEP 7 - S7-PLCSIM Simulation of S7-300-HW
- S7-SCL similar to Pascal
- S7-GRAPH for sequence control with
IEC 61131-3 / DIN 1131-3
SIMATIC HMI software -
Human Machine Interface
WinCC with - Advanced level
- Smart Option for Panel / PC
- Smart Access
- OPC-Interface
Software Engineering Tool for STEP 7
- SIMATIC CFC
- PID Control with SIMATIC
- SIMATIC NET SOFTWARE
USB-Adapter 6GK1571-0BA00-0AA0
S7 RS485, PC USB
including 5 m cable
ET 200S PN IM 151-3PN Includes 2 RJ45 Ports
Package with PROFINET
For PROFIBUS only interface
has to b ordered separately
S7- Controller Packages with PROFINET
and PROFIBUS
Touch- or Operator-Panel TP700 without buttons
PROFIBUS and PROFINET connection
USB-
Adapter
ETHERNET connection for Engineering
PROFIBUS
PROFINET
Overview / List / Graphic / Cabinet
ETHERNET connection for Engineering
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 14 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research
institutions and non commercial training departments!
Technical note: Authorization on USB-Stick (1 Stick)
Order number: 6ES7822-1AA02-4YA5
SIMATIC STEP 7 Professional – Software for Training
1er License
SW functional identical to
the industrial version
Check HW Compatibility
for TIA Portal More
TIA PORTAL 1 x Combo-license for interchangeable usage
of: SIMATIC STEP 7 Professional V12 SP1
STEP 7 Professional V12 SP1 (KOP, FUP, AWL), S7-GRAPH, S7-SCL, S7-PLCSIM
or: SIMATIC STEP 7 Professional 2010 SR3
STEP 7 V5.5 SP3 (KOP, FUP, AWL), S7-GRAPH V5.3 SP7, S7-SCL V5.3 SP6, S7-PLCSIM V5.4 SP5
1 x Combo-license for interchangeable usage
of: SIMATIC STEP 7 Safety Advanced V12
or: SIMATIC S7-Distributed Safety 5.4 SP5 Update 1
1 x SINAMICS Startdrive V12 SP1 for SINAMICS G120 CONTROL UNIT CU240E-2
Licenses only for STEP 7 Professional 2010 SR3
1 x SIMATIC S7-IMAP V3.0 SP3
1 x SIMATIC S7-Technology V4.2 SP3
Overview / List / Graphic / Cabinet
Core product for vocational
World Cup Industrial Control
More: www.siemens.com/worldskills
TIA Portal siemens.com/tia-portal/details
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 15 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency 12 x Combo-license for freely interchangeable usage
of: SIMATIC STEP 7 Professional V12 SP1
STEP 7 Professional V12 SP1 (KOP, FUP, AWL), S7-GRAPH, S7-SCL, S7-PLCSIM
or: SIMATIC STEP 7 Professional 2010 SR3
STEP 7 V5.5 SP3 (KOP, FUP, AWL) S7-GRAPH V5.3 SP7, S7-SCL V5.3 SP6, S7-PLCSIM V5.4 SP5
12 x Combo-license for freely interchangeable usage
of: SIMATIC STEP 7 Safety Advanced V12
or: SIMATIC S7-Distributed Safety 5.4 SP5 Update 1
12 x SINAMICS Startdrive V12 SP1 for SINAMICS G120 CONTROL UNIT CU240E-2
Licenses only for STEP 7 Professional 2010 SR3
12 x SIMATIC S7-IMAP V3.0 SP3
12 x SIMATIC S7-Technology V4.2 SP3
3 x 20 Software for Students, SIMATIC STEP 7 Professional, limited to 365 days via authorization, (Details slide 16)
SIMATIC STEP 7 Professional – Software for Training
12er Classroom License
Student License
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocation schools, Colleges and Universities, non commercial research institutions, non commercial training
departments and not for in-house vocational training departments!
Technical note: Authorization on USB-Stick (1 Stick + 3 Sticks with 20 Software for Students)
Order number: 6ES7822-1BA02-4YA5 Upgrade von STEP 7 Prof. < 2010 et V11: 6ES7822-1AA02-4YE5
Overview / List / Graphic / Cabinet
TIA PORTAL
TIA Portal siemens.com/tia-portal/details
SW functional identical to
the industrial version
Check HW Compatibility
for TIA Portal More
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 16 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency 20 x Combo-license for interchangeable usage
of: SIMATIC STEP 7 Professional V12 SP1
STEP 7 Professional V12 SP1 (KOP, FUP, AWL), S7-GRAPH, S7-SCL, S7-PLCSIM
or: SIMATIC STEP 7 Professional 2010 SR3
STEP 7 V5. 5SP3 (KOP, FUP, AWL), S7-GRAPH V5.3 SP7, S7-SCL V5.3 SP6, S7-PLCSIM V5.4 SP5
20 x SINAMICS Startdrive V12 SP1 for SINAMICS G120 CONTROL UNIT CU240E-2
Software functional identical to the industrial version, but is limited to 365 days through authorization
Package with:
5 * DVDs SIMATIC STEP 7 Professional 2010 SR3 , 5 * DVDs SIMATIC STEP 7 Professional V12 SP1,
5 * DVDs SIMATIC STEP 7 Professional V12 SP1 PLCSIM, 5 * DVDs SIMATIC STEP 7 Basic V12 SP1,
5 * DVDs SINAMICS Startdrive V12 SP1
SIMATIC STEP 7 Professional Software for students
Single License – limited to 365 days
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note:
For vocation schools, Colleges and Universities, non commercial research institutions, non commercial training
departments and not for in-house vocational training departments!
Technical note: Authorization on USB-Stick (1 Stick)
Order number: 6ES7822-1AC02-4YA5
Overview / List / Graphic / Cabinet
TIA PORTAL
TIA Portal siemens.com/tia-portal/details
SW functional identical to
the industrial version
Check HW Compatibility
for TIA Portal More
Student License
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 17 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMATIC S7 PID Control with SIMATIC
Standard and Modular
Standard control 6ES7860-2AA00-4YX0
6 x SIMATIC S7, STANDARD PID CONTROL V5.2 SP1, PARAMETRIZATION SW, FLOATING LICENSE FOR 1 INSTALLATION, E-SW,
SW AND DOCU ON CD, LICENSE KEY ON USB-STICK 6ES7830-2AA22-0YX0
1 x STANARD PID CONTROL V5.2 SINGLE LICENSE FOR 1 INSTALLATION R-SW, SW AND DOCU ON CD 6ES7860-2AA21-0YX0
5 x STANARD PID CONTROL V5.2 SINGLE LICENSE FOR 1 INSTALLATION R-SW, WITHOUT SW AND DOCU 6ES7860-2AA21-0YX1
1 x PID SELF TUNER V5.1 SINGLE LICENSE FOR 1 INSTALLATION R-SW, SW AND DOCU ON CD 6ES7860-4AA01-0YX0
5 x PID SELF TUNER V5.1 SINGLE LICENSE FOR 1 INSTALLATION R-SW, WITHOUT SW+DOCU 6ES7860-4AA01-0YX1
6 x MODULAR PID CONTROL V5.1 SP1, PARAMETRIZATION SW, FLOATING LICENSE FOR 1 INSTALLATION E-SW,
SW AND DOCU ON CD 6ES7830-1AA11-0YX0
1 x MODULAR PID CONTROL, V5.1 SINGLE LICENSE FOR 1 INSTALLATION R-SW, SW AND DOCU ON CD 6ES7860-1AA10-0YX0
5 x MOD.PID CTRL, FB V5.1 SINGLE LICENSE FOR 1 INSTALLATION R-SW, WITHOUT SW AND DOCU 6ES7860-1AA10-0YX1
1 x PID SELF TUNER V5.1 SINGLE LICENSE FOR 1 INSTALLATION R-SW, SW AND DOCU. ON CD 6ES7860-4AA01-0YX0
5 x PID SELF TUNER V5.1 SINGLE LICENSE FOR 1 INSTALLATION R-SW, WITHOUT SW AND DOCU 6ES7860-4AA01-0YX1
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research
institutions and non commercial training departments!
Technical note: None available
Order number: Standard: 6ES7860-2AA00-4YX0 Modular: 6ES7860-1AA00-4YX0
Modular control 6ES7860-1AA00-4YX0
Overview / List / Graphic / Cabinet
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 18 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMATIC S7 PID Control with SIMATIC
Standard and Modular
Standard-control consisting of:
6 x parameterization setting software Version 5.2
6 x function block Version 5.2
Integration continuous PID controller, impulse controller, step controller into the STEP 7
application program starting from PLC SIMATIC S7-313.
Modular control consisting of:
6 x Start-up-tool Version 5.1
6 x function block Version 5.1
Extended features when used with the Standard-Module starting from PLC SIMATIC S7-313.
Each package contains additionally
6 x PID Self-Tuner V5.1 for Online-parameterization and Online-adaption
while the application is running.
Details
Overview / List / Graphic / Cabinet
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 19 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMATIC CFC
12er Classroom License
12 x SIMATIC CFC V8.0
3 x 20 Software for Students SIMATIC CFC V8.0
SW limited to 365 days through authorization
20 licenses per USB-stick.
Overview / List / Graphic / Cabinet
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note:
For vocation schools, Colleges and Universities, non commercial research institutions, non commercial training
departments and not for in-house vocational training departments!
Technical note: Authorization on USB-Stick (1pieces)
Order number: 6ES7658-1EX08-0YS5
Student License
SW functional identical to
the industrial version
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 20 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMATIC CFC software for students
Single license – limited to 365 days
20 x SIMATIC CFC V8.0
SW limited to 365 days through authorization
20 licenses per USB-stick.
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note:
For vocation schools, Colleges and Universities, non commercial research institutions, non commercial training
departments and not for in-house vocational training departments!
Technical note: Authorization on USB-Stick (1pieces)
Order number: 6ES7658-1EX08-0YS6
Overview / List / Graphic / Cabinet
Student License
SW functional identical to
the industrial version
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 21 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMATIC NET Software IE Softnet
12er Classroom License
12 X 6GK1704-1CW12-0AA0 SIMATIC NET IE SOFTNET-S7 V12
SIMATIC NET SOFTNET-IE S7 V12 SW F. S7-,S5-COMP.-COMM.,OPC; PG/OP-COMM.,
CONF. SW, MAX 64 CONN; SINGLE LIC. F.1 INSTALLATION; R-SW, SW + ELECTR.
MAN ON DVD; LICENSE KEY ON USB-STICK; CLASS A; 2-LANGUAGES (G,E);
FOR 32/64BIT: WIN 7 PROF/ULT,
WINDOWS SERVER 2008 R2, SERVER 2012 FOR CP1612
System requirements: 64 BIT: WINDOWS 7 Professional, Ultimate SP1
32 BIT: WINDOWS 7 Professional, Ultimate SP1
Sales note:
For vocation schools, Colleges and Universities, non commercial research institutions, non commercial training
departments and not for in-house vocational training departments!
Technical note: None available
Order number: 6GK1950-0BB01
Overview / List / Graphic / Cabinet
TIA PORTAL
SW functional identical to
the industrial version
Check HW Compatibility
for TIA Portal More
TIA Portal siemens.com/tia-portal/details
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 22 Industry Sector
Quick start into automation
• Overview
• SCE Application Center
• S7-312 PLC Hardware-Set to Application Center
• SIMIT SCE Simulation
Overview / List / Graphic / Cabinet
Training curriculums siemens.com/sce/modules
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 23 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SCE Application Center
Perfectly matched to SPS-hardware
Starter set
6ES7312-1AE13-4AB0
System requirements: 32 BIT: Windows Vista Business SP1, Ultimate SP1, WINDOWS XP Professional SP3
Sales note:
For vocation schools, Colleges and Universities, non commercial research institutions, non commercial training
departments and not for in-house vocational training departments!
Technical note: Only compatible with SIMATIC STEP 7 Professional 2006 and 2010; License Key on USB-Stick
Order number: 6ES7800-1CC00-3YS8
Find more HW Trainer Packages
SIMATIC PLC/Peripheries Here
Only available in German language
1 x SCE Application center – console V2.0 SP1
The preconfigured environment for the quick introduction into automation technology
1 x SCE – Telestart V2.0 SP1
Learn basics with SIMATIC Telestart
1 x Exercises Version 2.0 SP1
19 Exercises with task assignments and solutions
Authorization to install on unlimited amount of PG/PC/Laptops,
as longs as only 12 installations are concurrently used.
Overview / List / Graphic / Cabinet
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 24 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SCE Application Center
SPS Hardware-Starter Set with S7-312
Prerequisite for purchase:
SCE – Application Center
6ES7800-1CC00-3YS8
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research
institutions and non commercial training departments! The purchase of one or more entry-level sets is linked to the
purchase of at least one SCE Application Center bound per 12 Hardware Starter Sets.
Order number: 6ES7312-1AE13-4AB0
1x Central unit CPU 312 with main memory 32 KByte 6ES7312-1AE14-0AB0
1x Load Power Supply 307 with 2A 6ES7307-1BA01-0AA0
1x HW Simulation Module SM 374, 16 Input or 16 Output or 8 I and 8O 6ES7374-2XH01-0AA0
1x Rail L=160mm 6ES7390-1AB60-0AA0
1x Micro Memory Card 64 KByte 6ES7953-8LF30-0AA0
1x PC-Adapter USB A2 6GK15710BA000AA0
Overview / List / Graphic / Cabinet
Find more HW Trainer Packages
SIMATIC PLC/Peripheries Here
TIA Portal siemens.com/tia-portal/details
Available until 27th December, 2013
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 25 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMIT SCE Simulation
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
NET Framework Version 3.5 SP1(included in delivery SIMIT 7.0)
STEP 7 Professional 2010
Sales note:
For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research
institutions and non commercial training departments!
Technical note: Hardware USB-Dongle
Order number: See next page
SIMIT Models for
download Here
1. Create/change/test (Dongle-user/single-user license) of virtual process models (plants) in PC with SIMIT
2. Test of STEP 7 program with SIMIT (campus – license) through MPI or ETHERNET/PROFINET
with a SIMATIC S7-300/400 PLC or with S7-PLCSIM (starting from Version 5.4 SP3) on the PC
I/O limits:
64 binary inputs E 0.0-E 7.7
64 binary outputs A 0.0-A 7.7
8 analog inputs EW 64-EW 78
8 analog outputs AW 64-AW 78
400 components and controls per project
Overview / List / Graphic / Cabinet
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 26 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMIT SCE Simulation
License variations
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
NET Framework Version 3.5 SP1 (included in delivery SIMIT 7.0)
STEP 7 Professional 2010
Sales note:
For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research
institutions and non commercial training departments!
Technical note: Hardware USB-Dongle
SIMIT SCE V7.0 CL Campus license with one Dongle
Order number: 9AP1414-2AA80
SIMIT SCE V7.0 3CL Campus license with three Dongle
Order number: 9AP1414-2AA82
SIMIT SCE V7.0 CL Upgrade from SIMIT SCE V5.0 to Campus license with one Dongle
Order number: 9AP1414-2AA81
SIMIT SCE V7.0 3CL Upgrade from 9AP1414-2AA80 to 9AP1414-2AA82
(additional deliverer of two dongles to a existing Campus license with one Dongle)
Order number: 9AP1414-2AA83
SIMIT SCE V7.0 2EL two single licenses (two dongles, without possibility to generate Student model!)
Order number: 9AP1414-2AA86
Overview / List / Graphic / Cabinet
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 27 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMIT SCE Simulation
Use cases Campus Licenses
Educator at school „X“
Educator (Dongle owner):
• Create, adapt, export and share models
• Create own models
• Export and hand-over own models
• Generation of the executable simulation model for
the students with password for the unlimited use at
the own campus
Test of a STEP 7 application program
Students
Free exchange of archived SIMIT-Models Educator at school „Y“
Executable Simulation model
with unlimited users
Test of a STEP 7 application program
Students
Overview / List / Graphic / Cabinet
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 28 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMIT SCE Simulation
Use cases Campus Licenses
* Password:
*The lifetime of executable simulation models is limited to 6 month and can be renewed through the owner of the Dongle as often as needed..
Networked environment (UDP)
Distributed none networked environment
Students
Students
Educator:
Educator:
Overview / List / Graphic / Cabinet
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 29 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMIT SCE Simulation
Student Projects with two different licenses
* The life-span of the executable simulation model is limited to 6 month and can be
continuously renewed by the owner of the dongle.
School-Dongle A “School-Campus”
Educator:
7 digit license key SIMIT SCE for Students
1. Installation Run-Time Software and input of 7 digit license key
from School-Dongle A and School-Dongle B
2. SIMIT-Project with postfix simit4S Usage with
password for 6 month without Dongle.
Generation of student project
postfix = simit4S
receives password for students
School-Dongle B “Additional School-Campus”
Educator:
7 digit license key
Overview / List / Graphic / Cabinet
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 30 Industry Sector
Micro Automation
• Overview
• LOGO! 12/24V and 230V / USB-cable
• LOGO! 12/24V and 230V / ETHERNET-Interface
• Basic Panel KTP400 for LOGO!
• Basic Panel KTP600 for S7-1200
• Upgrade STEP 7 V12 Basic for S7-1200 Package
• S7-1200
Overview / List / Graphic / Cabinet
Training curriculums siemens.com/sce/modules
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 31 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
LOGO! 12/24V or 230V
LOGO! 12/24V
5x LOGO! 12/24 RC 6ED1052-1MD00-0BA6
5x LOGO! Soft Comfort V7.1 6ED1058-0BA02-0YA1
1x LOGO! PC-cable (USB) 6ED1057-1AA01-0BA0
LOGO! 230V
5x LOGO! 230 RC 6ED1052-1FB00-0BA6
5x LOGO! Soft Comfort V7.1 6ED1058-0BA02-0YA1
1x LOGO! PC-cable (USB) 6ED1057-1AA01-0BA0
LOGO! PC-cable
4x LOGO! PC-cable (USB) 6ED1057-1AA01-0BA0
System requirements: WINDOWS 98SE, NT4.0, ME, 2000, XP, VISTA, WIN7, MAC OS X, LINUX
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research
institutions and non commercial training departments!
Technical note: None available
Order number: 12/24V : 6ED1057-3SA00-0YA1 Cable-Set: 6ED1057-3SA00-0YC0
230V : 6ED1057-3SA00-0YB1
Overview / List / Graphic / Cabinet
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 32 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
LOGO! 12/24V or 230V with ETHERNET-Interface
System requirements: WINDOWS 98SE, NT4.0, ME, 2000, XP, VISTA, MAC OS X, LINUX
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research
institutions and non commercial training departments!
Technical note: Ethernet-cable required
Order number: 12/24V : 6ED1057-3SA10-0YA1
230V : 6ED1057-3SA10-0YB1
LOGO! 12/24V
6x LOGO! 12/24 RCE 6ED1052-1MD00-0BA7
6x LOGO! Soft Comfort V7.1 6ED1058-0BA02-0YA1
LOGO! 230V
6x LOGO! 230 RCE 6ED1052-1FB00-0BA7
6x LOGO! Soft Comfort V7.1 6ED1058-0BA02-0YA1
Recommended accessory: 6AV2132-0AF00-0AA0Trainer
Package: SIMATIC Basic Panel KTP400
Recommended accessory: 6XV1870-3RH60
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45,
CROSSED TP CABLE 4X2, PREASSEMBLED WITH 2 RJ45
CONNECTORS, LENGTH 6 M
Recommended accessory: 6GK1950-0BB00
Trainer Package:
FASTCONNECT Accessories Kit
Overview / List / Graphic / Cabinet
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 33 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency 6 X SIMATIC HMI KTP400 BASIC COLOR PN, BASIC PANEL,KEY AND TOUCH OPERATION,
4" WIDESCREEN-TFT-DISPLAY,256 COLORS,PROFINET INTERFACE,CONFIGURATION FROMWINCC
BASIC V11 SP2/STEP 7 BASIC V11 SP2.
6AV6647-0AK11-3AX0
6 X LOGO! CSM 12/24 COMPACT SWITCH MODULE CONNECT. TO LOGO! (..0BA7) AND
UP TO 3 ADDITIONAL CLIENTS TO INDUSTRIAL ETHERNET WITH 10/100 MBIT/S
UNMANAGED SWITCH, 4 RJ45 PORTS, 1XFRONTPORT FOR DIAGNOSTICS
12/24V DC POWER SUPPLYLED DIAGNOSTICS, LOGO! CONFIGURATION
6GK7177-1MA10-0AA0
12 X SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2,
PREASSEMBLED WITH. 2 RJ45 CONNECTORS, LENGTH 6 M 6XV1870-3RH60
6 X SIMATIC WINCC BASIC V12 SP1 ENGINEERING-SW, FLOATING LICENSE SW
AND DOCUMENTATION ON DVD, FOR CONFIGURATION OF SIMATIC BASIC PANELS 6AV2100-0AA02-0AA5
System requirements: WINDOWS XP (32 BIT)/ WINDOWS 7 (32/64 BIT)
Sales note:
Technical note:
For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research
institutions and non commercial training departments!
Authorization for WINCC BASIC on USB-Stick
Order number: 6AV2132-0AF00-0AA0
Overview / List / Graphic / Cabinet
SIMATIC Basic Panel KTP400 for LOGO!
ETHERNET, Version ….0BA7
TIA Portal siemens.com/tia-portal/details
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 34 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency Package contains 6 times Contains 12 times
SIMATIC KTP400
BASIC COLOR PN
6AV6647-0AK11-3AX0
ETHERNET-
cable 6XV1870-3RH60
COMPACT SWITCH MODUL
for LOGO! (…0BA7) 6GK7177-1MA10-0AA0
SIMATIC WINCC BASIC V12 SP1
ENGINEERING-SW 6AV2100-0AA02-0AA5
Overview / List / Graphic / Cabinet
SIMATIC Basic Panel KTP400 for LOGO!
ETHERNET, Version …0BA7
TIA Portal siemens.com/tia-portal/details
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 35 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMATIC S7-1200 AC/DC/RELAIS or DC/DC/DC
System requirements: WINDOWS XP (32 BIT)/ WINDOWS 7 (32/64 BIT)
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments,
non commercial research institutions and non commercial training departments!
Technical note: Authorization for STEP 7 BASIC on USB-Stick
Order number: AC/DC/RLY DC/DC/DC
6ES7214-1BE30-4AB3 6ES7214-1AE30-4AB3
6 X Alternative:
SIMATIC S7-1200, CPU 1214C, COMPACT CPU, AC/DC/RLY, ONBOARD I/O: 14 DI 24V DC; 10 DO
RELAY 0,5A; 2 AI 0 - 10V DC, POWER SUPPLY: AC 85 - 264 V AC @ 47 - 63 HZ, PROGRAM/DATA
MEMORY: 50 KB
6ES7214-1BG31-0XB0 AC –Pack. 6ES7214-1BE30-4AB3
6 X Alternative:
SIMATIC S7-1200, CPU 1214C, COMPACT CPU, DC/DC/DC, ONBOARD I/O: 14 DI 24V DC; 10 DO 24 V
DC; 2 AI 0 - 10V DC, POWER SUPPLY: DC 20.4 - 28.8 V DC, PROGRAM/DATA MEMORY: 50 KB
6ES7214-1AG31-0XB0 DC -Pack: 6ES7214-1AE30-4AB3
6 X SIMATIC S7, STEP 7 BASIC V12 SP1, SINGLE LICENSE, E-SW, SW AND DOCU. ON DVD, CLASS A,
2 LANGUAGES (GE,EN), EXECUTABLE UNDER WINDOWS XP (32 BIT)/ WINDOWS 7 (32/64 BIT),
REFERENCE-HW:S7-1200
6ES7822-0AA02-0YA5
6 X SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2,
PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M
6XV1870-3RH60
6 X SIMATIC S7-1200, SIMULATOR MODULE, 8 CHANNEL SIMULATOR DC INPUT SWITCHES 6ES7274-1XF30-0XA0
6 X SIMATIC S7-1200, ANALOG OUTPUT SB 1232, 1 AO, +/- 10VDC (12 BIT RES.) OR 0 - 20 MA 6ES7232-4HA30-0XB0
6x
TIA PORTAL
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 36 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMATIC S7-1200 AC/DC/RELAIS or DC/DC/DC
Packages contains 6 times
Compact PLC
6ES7214-1BG31-0XB0
alternatively:
6ES7214-1AG31-0XB0
STEP 7 BASIC V12 SP1
6ES7822-0AA02-0YA5
ETHERNET-CABLE
6XV1870-3RH60
SIMULATOR MODUL,
8 INPUT SWITCHES,
DC INPUT
6ES7274-1XF30-0XA0
ANALOG OUTPUT, SB 1232, 1 AO, +/-10VDC
OR 0 - 20 MA (11 BIT RESOULUTION)
6ES7232-4HA30-0XB0
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 37 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMATIC Basic Panel KTP600 for S7-1200
ETHERNET
6 X COMPACT SWITCH MODULE CSM 1277 CONNECTION SIMATIC S7-1200 AND UP TO 3 ADDITIONAL
DEVICES TO INDUSTRIAL ETHERNET WITH 10/100 MBIT/S UNMANAGED SWITCH, 4 RJ45 PORTS, EXT.
24V DC POWER SUPPLY LED DIAGNOS., S7-1200 MODULE, INCL. ELECTRICAL MANUAL ON CD
6GK7277-1AA10-0AA0
6 X SIMATIC KTP600 BASIC COLOR PN 5,7" TFT DISPLAY, 256 COLORS ETHERNET INTERFACE;
CONFIGURATION FROM WINCC FLEXIBLE 2008 COMPACT SP1 OR WINCC BASIC V10.5 CONTAINS
OPEN SOURCE SW WHICH IS PROVIDED FREE OF CHARGE FOR DETAILS SEE CD
6AV6647-0AD11-3AX0
12 X SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2,
PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M 6XV1870-3RH60
System requirements: WINDOWS XP (32 BIT)/ WINDOWS 7 (32/64 BIT)
Sales note:
Technical note:
For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research
institutions and non commercial training departments!
Engineeringsoftware required
Order number: 6AV6651-7DE01-3AA0
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 38 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency Package contains 6 times
SIMATIC Basic Panel KTP600 for S7-1200
ETHERNET
Contains 12 times
SIMATIC KTP600
BASIC COLOR PN
6AV6647-0AD11-3AX0
ETHERNET-cable 6XV1870-3RH60
COMPACT SWITCH
MODULE CSM 1277 for SIMATIC S7-1200 6GK7277-1AA10-0AA0
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 39 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMATIC STEP 7 Basic V12 SP1 – Software for Training
Upgrade
System requirements: WINDOWS XP (32 BIT)/ WINDOWS 7 (32/64 BIT)
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments,
non commercial research institutions and non commercial training departments!
Technical note: Authorization on USB-Stick
Order number: 6ES7822-0AA02-4YE5
6 x STEP 7 Basic V12 SP1 Upgrade Version V10.5/ V11 to V12 SP1
SIMATIC STEP 7 BASIC V12 SP1,TRAINER PACK UPGRADE V12 SP1,
ENGINEERING-SOFTWARE; UPGRADE FOR 6 V10.5/V11 SINGLE
FLOATING-> V12 SP1 FLOATING; SOFTWARE AND DOCU. ON DVD;
LICENSE-KEYS ON USB; 6 LANGUAGES(GE,EN,IT,FR,SP,CH)
FOR CONFIGURATION OF SIMATIC S7-1200, SIMATIC BASIC PANELS;
6 x SINAMICS Startdrive V12 SP1 for SINAMICS G120 CONTROL UNIT CU240E-2
Package with: :
2 * DVDs SIMATIC STEP 7 Basic V12 SP1, 2 * DVDs SINAMICS Startdrive V12 SP1
For Hardware Package S7-1200 (Details slide 35) and Basic Panel KTP400 (Details slide 33)
TIA PORTAL
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 40 Industry Sector
Operator control & monitoring
• Overview
• Overview STEP 7 and HMI
• WinCC Advanced V12 SP1 / WinCC flexible 2008 SP3
• WinCC Advanced V12 SP1 / WinCC flexible 2008 SP 3
Software for students
• WinCC V7 SP 3 6er License
• Upgrade WinCC V7 SP 3 6er License
• WinCC/Web Navigator V7 SP 3 6er License
• Upgrade WinCC/Web Navigator V7 SP 3 6er License
• WinCC/Web Navigator V7 SP 3 6er License (ASIA)
• SIMATIC HMI TP700 COMFORT, COMFORT PANEL
Overview / List / Graphic / Cabinet
Training curriculums siemens.com/sce/modules
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 41 Industry Sector
Trainer Packages
Overview structure STEP 7 and HMI
SIMATIC Software - STEP 7 as the Basis
Engineering tools for STEP 7 - S7-PLCSIM Simulation of S7-300-HW
- S7-SCL similar to Pascal
- S7-GRAPH for sequence control with
IEC 61131-3 / DIN 1131-3
SIMATIC HMI software -
Human Machine Interface
WinCC with - Advanced level
- Smart Option for Panel / PC
- Smart Access
- OPC-Interface
Software Engineering Tool for STEP 7
- SIMATIC CFC
- PID Control with SIMATIC
- SIMATIC NET SOFTWARE
IE SOFTNET
USB-Adapter 6GK1571-0BA00-0AA0
S7 RS485, PC USB
including 5 m cable
ET 200S PN IM 151-3PN Includes 2 RJ45 Ports
Package with PROFINET
For PROFIBUS only interface
has to b ordered separately
S7-300Controller Packages with PROFINET
and PROFIBUS
Touch- or Operator-Panel TP700 with button
PROFIBUS and PROFINET connection
USB-
Adapter
ETHERNET connection for Engineering
PROFIBUS
PROFINET
Overview / List / Graphic / Cabinet
ETHERNET connection for Engineering
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 42 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMATIC WinCC Advanced V12 SP1/ WinCC flexible 2008 SP3
6er Classroom License
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise (not N), Ultimate SP1
32 BIT: WINDOWS 7 Professional, Enterprise (not N), Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research
institutions and non commercial training departments!
Technical note: Authorization on USB-Stick (1 Stick) Upgrade to 2008 SP3 2008 and V11 to Advanced V12 SP1
Order number: 6AV2102-0AA02-0AS5 6AV6613-1XA01-3CS0 6AV2102-4AA02-0AS5
TIA PORTAL 6 x Combo-license for freely interchangeable usage Engineering SW
of: SIMATIC WinCC Advanced V12 SP1
or: SIMATIC WinCC flexible 2008 SP3
6 x Options- and Runtimesoftware (Details slide 43)
Additionally included in the Full package: 6AV2102-0AA02-0AS5:
2 x 20 SIMATIC WinCC Advanced V12 SP1 / WinCC flexible 2008 SP3 for Students (Details slide 44)
Software functional identical to the industrial version, but is limited to 365 days through authorization
Overview / List / Graphic / Cabinet
Core product for vocational
World Cup Industrial Control
More: www.siemens.com/worldskills
Student License
TIA Portal siemens.com/tia-portal/details
SW functional identical to
the industrial version
Check HW Compatibility
for TIA Portal More
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 43 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMATIC WinCC Advanced V12 SP1/ WinCC flexible 2008 SP3
Option and Runtime Software
WinCC flexible 2008 SP3
WinCC flexible 2008 SP3 Runtime (128 Power Tags)
WinCC flexible/Sm@rtAccess for Panels
WinCC flexible/Sm@rtAccess for PC
WinCC flexible/Sm@rtService for Panels
WinCC flexible/Sm@rtService for PC
WinCC flexible/OPC-Server for PC
WinCC flexible/Archives for PC
WinCC flexible/Recipes for PC
WinCC Advanced V12SP1
WinCC RT Advanced (128 Power Tags)
WinCC Recipes for RT Advanced
WinCC Logging for RT Advanced
WinCC Sm@rtServer for RT Advanced
WinCC Sm@rtServer for SIMATIC Panel
TIA PORTAL
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 44 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMATIC HMI WinCC Advanced V12 SP1/ WinCC flexible 2008 SP3
Single License for Students – limited to 365 days
System requirements:
64 BIT: WINDOWS 7 Professional, Enterprise (not N), Ultimate SP1
32 BIT: WINDOWS 7 Professional, Enterprise (not N), Ultimate SP1, WINDOWS XP Professional SP3
Sales note:
For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research
institutions and non commercial training departments!
Technical note: Authorization on USB-Stick
Order number: 6AV2102-0AA02-0AS7
Package with:
10 * DVDs WinCC Advanced V12 SP1 and
10 * DVDs SIMATIC WinCC flexible 2008 SP3
TIA PORTAL 20 x Combo-license for interchangeable usage the Engineering SW
of : SIMATIC WinCC Advanced V12 SP1
or: SIMATIC WinCC flexible 2008 SP3
Licences limited to 365 days through authorization
Runtime Licences:
20 x SIMATIC WinCC RT Advanced V12 SP1 -128 PowerTags
20 x SIMATIC WinCC flexible 2008 Runtime SP3 - 128 PowerTags
Software functional identical to the industrial version, but is limited to 365 days through authorization
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
SW functional identical to
the industrial version
Check HW Compatibility
for TIA Portal More
Student License
Student License
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 45 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMATIC HMI TP700 COMFORT, COMFORT PANEL
with PROFINET and MPI/PROFIBUS DP INTERFACE
1 x 7“ SIMATIC HMI TP700 COMFORT, COMFORT PANEL with 6AV2124-0GC01-0AX0
PROFINET and MPI/PROFIBUS DP INTERFACE
(Panel with integrated Switch for 2 x RJ 45 ports)
Additionally the package contains
• 1 x Engineering- Options- and Runtimesoftware SW and License
SIMATIC WinCC Advanced V12 SP1 (Details slide 42)
• 1 x SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6,
CROSSED TP CABLE 4X2, PREASSEMBLED W. 2 RJ45 CONNECTORS,
LENGTH 6 M 6XV1870-3RH60
The TP 700 can only be programmed and configured with
SIMATIC WinCC Comfort, Advanced, Professional V11 and V12 (TIA Portal)
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research
institutions and non commercial training departments!
Technical note: Authorization on USB-Stick (1 Stick)
Order number: 6AV2133-4AF00-0AA0
Overview / List / Graphic / Cabinet
TIA PORTAL
TIA Portal siemens.com/tia-portal/details
SW functional identical to
the industrial version
Check HW Compatibility
for TIA Portal More
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 46 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMATIC WinCC V7 SP3
Classroom License
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research
institutions and non commercial training departments!
Technical note: Authorization on USB-Stick
Order number: 6AV6381-1BP07-0AX5 Upgrade: 6AV6381-1BP07-0AX3
WinCC V7 – Trainer Package
6x WinCC V7.0 SP3, Complete version with RC2048 Variables
WinCC and WinCC/Web Navigator V7 – Upgrade
6 x WinCC RC upgrade, V6.0 -> V7.0 SP3, V6.2 -> V7.0 SP3,
Complete version RC 2048 variables
6 x WinCC/WebNavigator Upgrade, V6.0 -> V7.0 SP3, V6.2 -> V7 SP3
Overview / List / Graphic / Cabinet
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 47 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMATIC WinCC/Web Navigator V7 SP3 – Diagnostics
Classroom License
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research
institutions and non commercial training departments!
Technical note: Authorization on USB-Stick
Order number: 6AV6371-1DH07-0AX5 Upgrade: 6AV6381-1BP07-0AX3
WinCC/Web Navigator V7 – Trainer Package
6 x WinCC V7.0 SP3, Complete version RC 2048 variables
6 x WinCC/Web Navigator Diagnostics Server V7.0 SP3
6 x WinCC/Web Navigator Diagnostics Client V7.0 SP3
WINCC and WinCC/Web Navigator V7 – Upgrade
6 x WinCC RC Upgrade, V6.0 -> V7.0 SP1, V6.2 -> V7.0 SP3
version RC 2048 variables
6 x WinCC/Web Navigator Upgrade, V6.0 -> V7.0 SP3, V6.2 -> V7.0 SP3
Overview / List / Graphic / Cabinet
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 48 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMATIC WinCC/Web Navigator V7 SP 3 ASIA – Diagnostics
Classroom License
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research
institutions and non commercial training departments!
Technical note: License Key on USB-Stick
Order number: 6AV6371-1DH07-0AV5
WinCC/Web Navigator V7 – ASIA Version
6 x WinCC V7.0 SP3, Complete version RC 2048 variables
6 x WinCC/Web Navigator Diagnostics Server V7.0 SP3
6 x WinCC/Web Navigator Diagnostics Client V7.0 SP3
Overview / List / Graphic / Cabinet
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 49 Industry Sector
Process Automation
• Overview
• Process control system SIMATIC PCS 7 –
3er Software License/Upgrade
• Process control system SIMATIC PCS 7 – 6er Software License
• Process control system SIMATIC PCS 7 AS RTX Box – Hardware
Overview / List / Graphic / Cabinet
Training curriculums siemens.com/sce/modules
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 50 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
Process control system SIMATIC PCS 7
3er License/Upgrade
System requirements: WINDOWS XP Prof. SP3, WINDOWS Server 2003 SR2, Server 2008 SR2 , Window 7 Ultimate SP1
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research
institutions and non commercial training departments!
Technical note: Authorization on USB-Stick
Order number: 6ES7650-0XX08-0YS5 Upgrade: 6ES7650-0XX17-0YE5 from V6.X to V7.1
6ES7650-0XX08-0YE5 from V7.1 auf V8.0
Recommended accessory if only DVDs Version 8.0 und 8.0 Update 1
available
6ES7658-4XX08-0YT8
SIMATIC PCS 7, SOFTWARE MEDIA PACKAGE V8.0 SP1
SOFTWARE MEDIA WITHOUT LICENSE
6ES7650-4XX08-0YT8
SIMATIC PCS 7, SOFTWARE SUPPORT PACKAGE V8.0
SOFTWARE MEDIA WITHOUT LICENSE
1 x DVD: PCS 7 Software V8.0 SP1
1 x Paper: Certificate of License (A5E00276662)
1 x Stick: License Key USB Stick with 3 * FLOATING LICENSES
Overview / List / Graphic / Cabinet
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 51 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
Process control system SIMATIC PCS 7
6er License
System requirements: WINDOWS XP Prof. SP3, WINDOWS Server 2003 SR2, Server 2008 SR2 , Window 7 Ultimate SP1
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research
institutions and non commercial training departments!
Technical note: License Key on USB-Stick
Order number: 6ES7650-0XX17-2YS5
Equivalent to 2 x SIMATIC PCS 7 – 3er License
(content on page 52)
Overview / List / Graphic / Cabinet
Recommended accessory if only DVDs Version 8.0 und 8.0 Update 1
available
6ES7658-4XX08-0YT8
SIMATIC PCS 7, SOFTWARE MEDIA PACKAGE V8.0 SP1
SOFTWARE MEDIA WITHOUT LICENSE
6ES7650-4XX08-0YT8
SIMATIC PCS 7, SOFTWARE SUPPORT PACKAGE V8.0
SOFTWARE MEDIA WITHOUT LICENSE
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 52 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
System requirements: WINDOWS XP Prof. SP3 (32 BIT), WINDOWS Server 2003 SR2, Server 2008 SR2 , WINDOWS 7 Ultimate SP1
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research
institutions and non commercial training departments!
Technical note: None available
Order number: 6ES7654-0UE13-0XS0
Process control system SIMATIC PCS 7 AS RTX Box
Hardware
• 1 x SIMATIC PCS 7 AS RTX Box 427C
• 1 x ET 200M – Station with 7DE(144), 3DA(64), 1AE(8), 1AA(8) Assemblies
• 1 x SITOP power supply 20A with Front Connector and Communication Bus
Content: see next page
Note:
• PCS 7 Licences additional required (Details slide 50)
• Trainer Package adjusted on PCS 7 training curriculms
Overview / List / Graphic / Cabinet
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 53 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
Process control system SIMATIC PCS 7 AS RTX Box
Hardware (1)
1 x SIMATIC PCS 7 AS RTX AUTOMATION SYSTEM BASED ON IPC427C, CORE2 DUO 1.2 GHZ, 800 MHZ FSB,
3MB SLC, 2 GB DDR3 1066 SODIMM RAM, 4 GB COMPACT-FLASH CHANGEABLE, CP5611 ONBOARD,
WINDOWS EMBEDDED STANDARD 2009, WINAC RTX 2010 SOFTWARE CONTROLLER, RUNTIME
LICENSE AS PO100 PREINSTALLED FOR PCS 7 OPERATING, APPLICABLE EX PCS 7 V7.1 SP2 OR
HIGHER
6ES7654-0UE13-0XX0
1 x SIMATIC,STAND.SECTIONAL RAIL WIDTH 35MM, LENGTH 483MM FOR 19 IN.CABINETS 6ES5710-8MA11
1 x SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2,
PREASSEMBLED W. 2 RJ45 CONNECTORS, LENGTH 6 M 6XV1870-3RH60
1 x SIMATIC NET, CONN. CABLE 830-2 F. PROFIBUS, PREASSEMBLED CABLE WITH 2 SUB-D-CONNECTORS
9-POLE, SWITCHABLE TERMINATING RESISTORS, 5 M 6XV1830-2AH50
1 x SITOP PSU100M 20A STABILIZED POWER SUPPLY INPUT: 120-230 V AC 110-220 V DC
OUTPUT: 24 V/20 A DC 6EP1336-3BA10
2 x SIMATIC S7-300, DIGITAL INPUT SM 321, OPTICALLY ISOLATED 32DI, 24 V DC, 1 X 40 PIN 6ES7321-1BL00-0AA0
1 x SIMATIC S7/PCS7, SM 321 DIGITAL INPUT MODULE, 16 DI, 24V DC, 1 X 40 PIN, CAPABLE OF
DIAGNOSTICS, FOR CONTACTS (CONNECTED/ UNCONNECTED), NAMUR SENSOR, 3/4-WIRE-BERO,
WITH FLUTTER MONITORING, PULSE LENGTHENING, WIRE BREAK DETECTION, IM153-2 INTERFACE
MOD. REQUIRED
6ES7321-7TH00-0AB0
4 x SIMATIC S7-300, DIGITAL INPUT SM 321, GALVANICALLY ISOLATED, 16 DI, DC 24V, 1 X 20 PIN, PROCESS
INTERRUPT, DIAGNOSTICS, FIT FOR ISOCHRONE MODE 6ES7321-7BH01-0AB0
1 x SIMATIC S7-300, DIGITAL OUTPUT SM 322, OPTICALLY ISOLATED, 32DO, 24V DC, 0.5A, 1 X 40 PIN, SUM
OF OUTPUT CURRENTS 4A/GROUP (16A/MODULE) 6ES7322-1BL00-0AA0
Details
Overview / List / Graphic / Cabinet
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 54 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
Process control system SIMATIC PCS 7 AS RTX Box
Hardware (2)
2 x SIMATIC S7/PCS7, SM 322 DIGITAL OUTPUT MODULE, 16 DO, DC 24 V / 0,5A, CAPABLE OF
DIAGNOSTICS, WIRE BREAK DETECTION TO 0 AND 1 SIGNAL, 1 X 40-PIN, INTERFACE MODULE IM 153-X
HF NECESSARY
6ES7322-8BH10-0AB0
1 x SIMATIC S7-300, ANALOG INPUT SM 331, GALVANICALLY ISOLATED, 8 AI, 14 BIT, 0.052MS/CHANNEL,
CURRENT, VOLTAGE, INTERRUPTS, DIAGNOSTICS,1 X 20 PIN, FIT FOR ISOCHRONE MODE IMPROVED
DP-CYCLE TIME FOR ISOCHRONE MODE
6ES7331-7HF01-0AB0
1 x SIMATIC S7-300, ANALOG OUTPUT SM 332, OPTICALLY ISOLATED, 8 AO, U/I; DIAGNOSTICS;
RESOLUTION 11/12 BITS, 40 PIN, REMOVE/INSERT W. ACTIVE, BACKPLANE BUS 6ES7332-5HF00-0AB0
5 x SIMATIC S7-300, FRONT CONNECTOR FOR SIGNAL MODULES WITH SCREW CONTACTS, 20-PIN 6ES7392-1AJ00-0AA0
7 x SIMATIC S7-300,FRONT CONNECTOR WITH SCREW CONTACTS, 40-PIN 6ES7392-1AM00-0AA0
6 x SIMATIC DP, BUS UNIT FOR ET200M F. THE INTEGR.OF TWO 40 MM WIDE I/O SUBMODULES FOR
INSERT/REMOVE 6ES7153-2BA02-0XB0
1 x SIMATIC DP, RAIL FOR ET 200M 620 MM LONG FOR BUS MODULES FUNCTION: INSERT/REMOVE 6ES7195-1GG30-0XA0
1 x SIMATIC DP, BUS UNIT FOR ET200M F. THE INTEGR. OF 1 PS A.1 IM153 FUNCTION:INSERT/REMOVE-
MODULE WHILE OPERATING MODE RUN INCL. COVER FOR BUS UNIT 6ES7195-7HA00-0XA0
1 x SIMATIC DP, ET 200M INTERFACE IM 153-2 HIGH FEATURE FOR MAX. 12 S7-300 MODULES, WITH
REDUNDANCY, TIME STAMPING FIT FOR ISOCHRONE MODE NEW FEATURES: 12 MODULES / STATION
SLAVE INITIATIVE FOR SWITCHES AND DRIVE ES EXTENDED DATA FOR HART SECON- DARY
VARIABLES OPERATON WITH 64PT MODULES EXTENDES TIMESTAMPS WITH 32 SIGNALS / SLOT
6ES7195-7HB00-0XA0
Details
Overview / List / Graphic / Cabinet
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 55 Industry Sector
PLCs and Peripheries
• Overview
• S7-1513 PN
• S7-314C 2PN/DP
• S7-314C 2PN/DP (Upgrade TIA Portal)
• S7-315F-2PN/DP
• ET 200S PN
• SIMATIC ET 200S CPU IM 151-8 F PN/DP
• S7-315T Technology
• SIMATIC Embedded SPS
• Soft-SPS WinAC F RTX 2010
S7-300 Safety
ET 200S Safety
ET 200S Safety
S7-300 Safety
Overview / List / Graphic / Cabinet
• S7-1516 PN/DP
Training curriculums siemens.com/sce/modules
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 56 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMATIC S7-1513 PN
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research
institutions and non commercial training departments!
Technical note: SIMATIC STEP 7 Professional V12 SP1 necessary
Order number: 6ES7513-1AL00-4AB0
Overview / List / Graphic / Cabinet
1 X SIMATIC PM 1507 24 V/8 A STABILIZED POWER SUPPLY FOR SIMATIC S7-1500 INPUT: 120/230 V AC
OUTPUT: 24 V/8 A DC
6EP1333-4BA00
1 X SIMATIC S7-1500, CPU 1513-1 PN, CENTRAL PROCESSING UNIT WITH WORKING MEMORY 300 KB FOR
PROGRAM AND 1.5 MB FOR DATA, 1. INTERFACE, PROFINET IRT WITH 2 PORT SWITCH, 40 NS BIT-
PERFORMANCE, SIMATIC MEMORY CARD NECESSARY
6ES7513-1AL00-0AB0
1 X SIMATIC S7-1500, DIGITAL INPUT MODULE DI32 X DC24V, 32 CHANNELS IN GROUPS OF 16;
INPUT DELAY 0.05... 20MS; INPUT TYPE 3 (IEC 61131); DIAGNOSIS, PROCESSALARMS
6ES7521-1BL00-0AB0
1 X SIMATIC S7-1500, DIGITAL OUTPUT MODULE DQ 32 X 24VDC/0.5A; 32 CHANNELS IN GROUPS OF 8, 4 A
PER GROUP; DIAGNOSIS; SUBSTITUTE VALUE
6ES7522-1BL00-0AB0
1 X SIMATIC S7-1500, MOUNTING RAIL 482 MM (APPR. 19 INCH) INCL. GROUNDING ELEMENT, INTEGRATED
DIN RAIL FOR MOUNTING OF SMALL COMPONENTS SUCH AS CLAMPS, FUSES OR RELAYS
6ES7590-1AE80-0AA0
2 X SIMATIC S7-1500, FRONTCONNECTOR SCREW-TYPE, 40PIN, FOR 35MM WIDE MODULES, INCL. 4
JUMPERS, AND CABLE STRAP
6ES7592-1AM00-0XB0
1 X SIMATIC S7, MEMORY CARD FOR S7-1X00 CPU/SINAMICS, 3,3 V FLASH, 24 MBYTE 6ES7954-8LF01-0AA0
1 X SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2,
PREASSEMBLED W. 2 RJ45 CONNECTORS, LENGTH 6 M
6XV1870-3RH60
TIA Portal siemens.com/tia-portal/details
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 57 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMATIC S7-1513 PN
Overview / List / Graphic / Cabinet
1x Memory Card
24 MB 2x Front Connector
40-Polle
1x SIMATIC S7-1500,
Rail 480 MM
1x Power Supply
Input AC 120/230V;
Output.: DC 24V, 8A
1x ETHERNET-Cable
1x CPU 1513-1 PN 1x DIGITAL-
OUTPUT MODULE
DQ 32 X DC24V / 0,5A
1x DIGITAL-
INPUT MODULE
DI 32 X DC24V
When analog or PROFIBUS Periphery is needed –
we recommend 6ES7516-3AN00-4AB1
(package with SIMATIC S7-1516 PN/DP)
For engineering SIMATIC STEP 7 Professional
V12 SP1 is absolutely necessary
TIA Portal siemens.com/tia-portal/details
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 58 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMATIC S7-1516 PN/DP
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research
institutions and non commercial training departments!
Technical note: SIMATIC STEP 7 Professional V12 SP1 necessary
Order number: 6ES7516-3AN00-4AB1
Overview / List / Graphic / Cabinet
1 X SIMATIC PM 1507 24 V/8 A STABILIZED POWER SUPPLY INPUT: 120/230 V AC OUTPUT: 24 V/8 A DC 6EP1333-4BA00
1 X SIMATIC S7-1500, CPU 1516-3 PN/DP, WITH WORKING MEMORY 1 MB FOR PROGRAM , 5 MB FOR DATA,
1. INTERFACE, PROFINET IRT WITH 2 PORT SWITCH, 2. INTERFACE, ETHERNET,
3. INTERFACE, PROFIBUS, 10 NS BIT-PERFORMANCE, SIMATIC MEMORY CARD NECESSARY
6ES7516-3AN00-0AB0
1 X SIMATIC S7-1500, DIGITAL INPUT MODULE DI32 X DC24V, 32 CHANNELS IN GROUPS OF 16; 6ES7521-1BL00-0AB0
1 X SIMATIC S7-1500, DIGITAL OUTPUT MODULE DQ 32 X 24VDC/0.5A; 32 CHANNELS 6ES7522-1BL00-0AB0
1 X SIMATIC S7-1500, ANALOG INPUT MODULE AI 8 X U/I/RTD/TC, 16 BITS OF RESOLUTION, ACCURACY 0.3
%; 8 CHANNELS
6ES7531-7KF00-0AB0
1 X SIMATIC S7-1500, ANALOG OUTPUT MODULE AQ 4 X U/I ST; 16 BITS OF RESOLUTION, ACCURACY 0.3 %;
4 CHANNELS IN GROUPS OF 4;
6ES7532-5HD00-0AB0
1 X SIMATIC S7-1500, MOUNTING RAIL 482 MM (APPR. 19 INCH) INCL. GROUNDING ELEMENT, INTEGRATED
DIN RAIL FOR MOUNTING OF SMALL COMPONENTS SUCH AS CLAMPS, FUSES OR RELAYS
6ES7590-1AE80-0AA0
1 X SIMATIC S7, MEMORY CARD FOR S7-1X00 CPU/SINAMICS, 3,3 V FLASH, 24 MBYTE 6ES7954-8LF01-0AA0
4 X SIMATIC S7-1500, FRONTCONNECTOR SCREW-TYPE, 40PIN, FOR 35MM WIDE MODULES 6ES7592-1AM00-0XB0
1 X SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2,
PREASSEMBLED W. 2 RJ45 CONNECTORS, LENGTH 6 M
6XV1870-3RH60
TIA Portal siemens.com/tia-portal/details
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 59 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMATIC S7-1516 PN
Overview / List / Graphic / Cabinet
1x Memory
Card 24 MB
4x Front
Connector
40-Pole
1x SIMATIC
S7-1500,
Rail 480 MM
1x Power Supply
Input AC: 120/230V;
Output DC: 24V, 8A
1x ETHERNET-
Cable
1x CPU
1516 PN/DP
1x DIGITAL-
OUTPUT MODULE
DQ 32 X DC24V/0,5A
1x DIGITAL-
INPUT MODULE
DI 32 X DC24V
1x ANALOG-
OUTPUT MODULE
AQ 4 X U/I ST
1x ANALOG-
INPUT MODULE
AI 8 X U/I/RTD/TC
TIA Portal siemens.com/tia-portal/details
When analog or PROFIBUS Periphery is needed –
we recommend 6ES7516-3AN00-4AB1
(package with SIMATIC S7-1516 PN/DP)
For engineering SIMATIC STEP 7 Professional
V12 SP1 is absolutely necessary
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 60 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMATIC S7-314C-2 PN/DP
Recommended accessory: 6XV1870-3RH60
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD
RJ45/RJ45, CROSSED TP CABLE 4X2, PREASSEMBLED WITH 2
RJ45 CONNECTORS, LENGTH 6 M
Recommended accessory: 6GK1950-0BB00
Trainer Package:
FASTCONNECT Accessories Kit
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1
32 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research
institutions and non commercial training departments!
Technical note: STEP 7 V5.5, V11 or V12 required
Order number: 6ES7314-6EH04-4AB3
1 X SIMATIC S7-300, CPU 314C-2 PN/DP COMP.CPU WITH MPI, 24 DI/16 DO, 4AI, 2AO, 1 PT100, 4 FAST
COUNTERS (60 KHZ), INTEGRATED DP INTERFACE, INTEGRATED 24V DC POWER SUPPLY, 192 KBYTE 6ES7314-6EH04-0AB0
1 X SIMATIC S7-300 PS307 IN:120/230 V AC OUT: 24 V DC/5 A 6ES7307-1EA01-0AA0
2 X SIMATIC S7-300, FRONT CONNECTOR 392 WITH SCREW CONTACTS, 40-POLE 6ES7392-1AM00-0AA0
1 X SIMATIC S7-300, SIMULATOR MODULE SM 374, FOR SIMULATING 16 INPUTS OR 16 OUTPUTS RESP. 8
INPUTS AND 8 OUTPUTS; 16 SWITCHES, 16 LED 6ES7374-2XH01-0AA0
1 X SIMATIC S7-300, RAIL L=480MM 6ES7390-1AE80-0AA0
1 X SIMATIC S7, MICRO MEMORY CARD FOR S7-300/C7/ET 200S IM151 CPU, 3.3 V NFLASH, 512 KBYTES 6ES7953-8LJ30-0AA0
1 X SIMATIC S7, PC ADAPTER USB A2 FOR CONNECTION OF S7-200/300/400 C7; WITH USB-CABLE (5M) 6GK1571-0BA00-0AA0
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
Available until 30th September, 2014
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 61 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMATIC S7-314C-2 PN/DP
1x Power Supply PS 307,
AC 120/230V; DC 24V, 5A
1x Micro Memory Card
512 KByte
2x FRONT
CONNECTOR
for SM, 40-Pole
1x Rail L=480mm
1x CPU314C-2 PN/DP
with 192 KByte
memory
SIMULATOR MODULE SM 374
Overview / List / Graphic / Cabinet
PC Adapter
USB
TIA Portal siemens.com/tia-portal/details
Available until 30th September, 2014
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 62 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMATIC S7-314C-2 PN/DP
Upgrade Package for TIA Portal
1 X SIMATIC S7-300, CPU 314C-2PN/DP COMPACT CPU WITH 192 KBYTE WORKING MEMORY, 24 DI/16 DO,
4AI, 2AO, 1 PT100, 4 FAST COUNTERS (60 KHZ), 1. INTERFACE MPI/DP 12MBIT/S, 2. INTERFACE
ETHERNET PROFINET, WITH 2 PORT SWITCH, INTEGRATED 24V DC POWER SUPPLY, FRONT
CONNECTOR (2 X 40-POLE) AND MICRO MEMORY CARD REQUIRED
6ES7314-6EH04-0AB0
1 X SIMATIC S7, MICRO MEMORY CARD FOR S7-300, 3.3 V NFLASH, 512 KBYTES 6ES7953-8LJ30-0AA0
1 X SIMATIC S7-300, DIGITAL MODULE SM 323, OPTICALLY ISOLATED, 16 DI AND 16 DO, 24V DC, 0.5A,
AGGREGATE CURRENT 4A, 1 X 40-POLE
6ES7323-1BL00-0AA0
3 X SIMATIC S7-300, FRONT CONNECTOR 392 WITH SCREW CONTACTS, 40-POLE 6ES7392-1AM00-0AA0
1 X SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2,
PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M
6XV1870-3RH60
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1
32 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1 , WINDOWS XP Professional SP3
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research
institutions and non commercial training departments!
Technical note: STEP 7 V5.5, V11 or V12 required
Order number: 6ES7314-6EH04-4AB4
Overview / List / Graphic / Cabinet
Recommended accessory: 6GK1950-0BB00
Trainer Package:
FASTCONNECT Accessories Kit
TIA Portal siemens.com/tia-portal/details
Available until 30th September, 2014
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 63 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMATIC S7-314C-2 PN/DP
Upgrade Package for TIA Portal
1x Micro Memory
Card
512 KByte
3x FRONT
CONNECTOR
for SM, 40-Pole
1x CPU314C-2 PN/DP
with 192 KByte
memory
ETHERNET-cable
6XV1870-3RH60 1x Digital Modul
SM 323, 16 DI and 16 DO,
DC 24V, 0,5A, 40 POLE
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
Available until 30th September, 2014
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 64 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMATIC S7-315F-2 PN/DP – PROFINET
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1
32 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research
institutions and non commercial training departments!
Technical note: STEP 7 V5.5, V11 or V12 required
Order number: 6ES7315-2FH14-4AB1
1 x Rail L=480mm 6ES7390-1AE80-0AA0
1 x Power Supply PS 307, AC 120/230V; DC 24V, 5A 6ES7307-1EA01-0AA0
1 x CPU315F-2 PN/DP with 512 KByte, Working Memory 6ES7315-2FJ14-0AB0
1 x Micro Memory Card 512 KByte 6ES7953-8LJ30-0AA0
1 x Digital Module Input/Output SM 323, 16 DE and 16 DA, C 24V, 0,5A, 40 POLIG 6ES7323-1BL00-0AA0
1 x Front Connector for SM, 40-Pole 6ES7392-1AM00-0AA0
1 x Analog Module Input/Output SM 334, 4 AE/2 AA, 20-Pole 6ES7334-0CE01-0AA0
1 x Front Connector for SM, 20-Pole 6ES7392-1AJ00-0AA0
1 x Distributed Safety V5.4, Floating License 6ES7833-1FC02-0YA5
Complementary to:
Trainer Package F-Technology S7-300 – PROFINET
6ES7326-2FS00-4AB1
Recommended accessory: 6XV1870-3RH60
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD
RJ45/RJ45, CROSSED TP CABLE 4X2, PREASSEMBLED
WITH 2 RJ45 CONNECTORS, LENGTH 6 M
Recommended accessory: 6GK1950-0BB00
Trainer Package:
FASTCONNECT Accessories Kit
Overview / List / Graphic / Cabinet
Core product for vocational
World Cup Industrial Control
More: www.siemens.com/worldskills
TIA Portal siemens.com/tia-portal/details
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 65 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMATIC S7-315F-2 PN/DP – PROFINET
Recommended accessory: 6XV1870-3RH60
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CROSSED TP
CABLE 4X2, PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M
Recommended accessory: 6GK1950-0BB00
Trainer Package:
FASTCONNECT Accessories Kit
1x Rail L = 480mm 1x Power Supply PS 307,
AC 120/230V; DC 24V, 5A
1x CPU315F-2 PN/DP
with 512 KByte Memory
1x Micro Memory Card
512 KByte
1x Front Connector
for SM, 40-Pole
1x Digital Module SM 323,
16 DI and 16 DO, DC 24V,
0,5A, 40-Pole
1x Analog Module SM 334,
4 AE/2 AA, 20-Pole
1x Front Connector
for SM, 20-Pole
1x Distributed
Safety V5.4,
Floating License
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 66 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
System requirements: 64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, Windows XP Professional SP3
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research
institutions and non commercial training departments!
Technical note: Safety-CPU required
Order number: 6ES7326-2FS00-4AB1
SIMATIC S7-300 F-Technology
Safety In-/Output Module
1 x F-Digital Input SM 326, 24 DE 6ES7326-1BK02-0AB0
1 x F-Digital Output SM 326, 8 DA; DC 24V, 2A 6ES7326-2BF41-0AB0
1 x Separator Module 6ES7195-7KF00-0XA0
2 x Front Connector for SM, 40-Pole 6ES7392-1AM00-0AA0
Overview / List / Graphic / Cabinet
Complementary to:
Trainer Package
CPU315F-2 PN/DP – PROFINET
6ES7315-2FH14-4AB1
Complementary to:
Trainer Package
S7-mEC - modular Embedded
6ES7677-1FD00-4AB1
TIA Portal siemens.com/tia-portal/details
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 67 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMATIC S7-300 F-Technology
1x F-Digital Input
SM 326,
24 DE
1x F-Digital Output
SM 326,
8 DA; DC 24V, 2A
1x Separator Module 2x Front Connector
for SM, 40-Pole
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 68 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMATIC ET 200S PLC IM 151-8 F PN/DP
Complementary to:
TP F-Technik ET 200S PN -
PROFINET
6ES7138-4FS01-4AB1
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1
32 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research
institutions and non commercial training departments!
Technical note: STEP 7 V5.5, V11 or V12 required
Order number : 6ES7151-8FB00-4AB1
Recommended accessory: 6XV1870-3RH60
SIMATIC NET INDUSTRIAL ETHERNET TP
XP CORD RJ45/RJ45, CROSSED TP CABLE
4X2, PREASSEMBLED WITH 2 RJ45
CONNECTORS, LENGTH 6 M
Recommended accessory: 6GK1950-0BB00
Trainer Package:
FASTCONNECT Accessories Kit
1 X IM151-8 F-CPU PN/DP192 KB PN-Interface with 3 RJ45 Ports 6ES7151-8FB01-0AB0
1 X DP-MASTER INTERFACE 6ES7138-4HA00-0AB0
2 X POWERMODUL PM-E, DC 24V/8A RO FOR ELECTRONIC MODULE W. DIAGNOSIS 6ES7138-4CA80-0AB0
20 X (5 X 4) DI HIGH FEATURE DC 24V 6ES7131-4BD01-0AB0
20 X (5 X 4) DO HIGH FEATURE DC 24V/0,5A, 6ES7132-4BD00-0AB0
1 X 6ES7138-4GA50-0AB0
4 X (2 X 2) AI U HIGH FEATURE 6ES7134-4LB02-0AB0
2 X AO U HIGH FEATURE 6ES7135-4LB02-0AB0
1 X COUNT 24V/100KHZ, 6ES7138-4DA04-0AB0
15 X (3 X 5) 5 UNIVERSAL-TERMINALMODULE TM-E15S26-A1 6ES7193-4CA40-0AA0
2 X TERMINALMODUL TM-P15S23-A0 6ES7193-4CD20-0AA0
1 X MICRO MEMORY CARD 512 KBYTE, 6ES7953-8LJ30-0AA0
1 X STAND.SECTIONAL RAIL . 483MM (19"), 6ES5710-8MA11
1 X S7 DISTRIBUTED SAFETY V5.4 6ES7833-1FC02-0YA5
ELEKTRONIC MODULE, 4SI IO-LINK, 4 POINT TO POINT INTERFACES
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 69 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
2 X POWERMODUL PM-E,
20 (5 X 4) DI HIGH FEATURE DC 24V
20 (5 X 4) DO STANDARD DC 24V/0,5A,
2 DO RELAY(SWITCH)
4 (2 X 2) AI U HIGH FEATURE
2 AO U HIGH FEATURE
1 X COUNT 24V/100KHZ
SIMATIC ET 200S PLC IM 151 F PN/DP
1x Micro Memory Card
512 KByte
1x Distributed Safety V5.4,
Floating License
1 x IM151-8 F-CPU PN/DP 1x DP-Master Interface
1x Standard Section Rail 35mm,
L=483mm for 19"-Schränke
1 x I/O-Link Master
15 (3 X 5) UNIVERSAL
TERMINALMODULE TM-E15S26-A1
2 X TERMINALMODUL TM-P15S23-A0
Overview / List / Graphic / Cabinet
Recommended accessory: 6XV1870-3RH60
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD
RJ45/RJ45, CROSSED TP CABLE 4X2, PREASSEMBLED
WITH 2 RJ45 CONNECTORS, LENGTH 6 M
Recommended accessory: 6GK1950-0BB00
Trainer Package: FASTCONNECT Accessories Kit
Recommended accessory: 6EP1332-2BA20 SITOP PSU100S STABILIZED POWER SUPPLY
INPUT: AC 120/230 V OUTPUT: DC 24 V/2,5 A
Alternativ: 6EP1333-2BA20
SITOP PSU100S STABILIZED POWER SUPPLY
INPUT: AC 120/230 V OUTPUT: DC 24 V/5 A
TIA Portal siemens.com/tia-portal/details
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 70 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMATIC ET 200S PN – PROFINET
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research
institutions and non commercial training departments!
Technical note: None available
Order number: 6ES7151-3BA20-4AB1
Complementary to: Trainer Package
F-Technology ET 200S PN - PROFINET
6ES7138-4FS00-4AB1
Recommended accessory: 6XV1870-3RH60
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD
RJ45/RJ45, CROSSED TP CABLE 4X2, PREASSEMB-
LED WITH 2 RJ45 CONNECTORS, LENGTH 6 M
Recommended accessory: 6GK1950-0BB00
Trainer Package:
FASTCONNECT Accessories Kit
1 x ET 200S, Digital Input, 2DI HF, DC 24V, 5ST. (Total 10 DE) 6ES7131-4BB01-0AB0
1 x ET 200S, Digital Output, 2DO HF,DC24V, 0,5A, 5ST. (Total 10 DA) 6ES7132-4BB01-0AB0
2 x ET 200S, Power Module. PM-E, DC 24-48V 6ES7138-4CA50-0AB0
2 x ET 200S, Terminal Module, TM-E15S24-A1 5ST. (Total 10) 6ES7193-4CA20-0AA0
2 x ET 200S, Terminal Module, TM-P15S23-A0 6ES7193-4CD20-0AA0
1 x ET 200S, Interface Module IM151-3 PN HF 2 Bus Interfacing about RJ45 6ES7151-3BA23-0AB0
1 x Micro Memory Card 64 KByte 6ES7953-8LF30-0AA0
1 x Stand Sectional Rail 35mm, L=483mm for 19"-Cabinets 6ES5710-8MA11
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 71 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMATIC ET 200S PN
1x Micro Memory Card
64 KByte
2x ET 200S,
Power Module.
PM-E, DC 24-48V
2x ET 200S,
Terminal Module,
TM-E15S24-A1 5ST. (Total 10)
2x ET 200S,
Terminal Module,
TM-P15S23-A0
1x ET 200S, Interfacing Module
IM151-3 PN HF two bus
connections at RJ45
1x ET 200S, Digital Input,
2DI HF, DC 24V, 5ST.
(Total 10 DE)
1x ET 200S, Digital Output,
2DO HF,DC24V, 0,5A, 5ST.
(Total 10 DA)
1x Stand Sectional Rail 35mm,
L=483mm for 19"-Cabinets
Recommended accessory: 6XV1870-3RH60
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD
RJ45/RJ45, CROSSED TP CABLE 4X2, PREASSEMBLED
WITH 2 RJ45 CONNECTORS, LENGTH 6 M
Recommended accessory: 6GK1950-0BB00
Trainer Package:
FASTCONNECT Accessories Kit
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 72 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMATIC ET 200S F-Technology
Safety In-/Output Module
Complementary to: Trainer Package
ET 200S PN - PROFINET
6ES7151-3BA20-4AB1
Complementary to: Trainer Package
ET 200S CPU IM 151 PN/DP
6ES7151-8FB00-4AB1
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1
32 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research
institutions and non commercial training departments!
Technical note: Safety-CPU required
Order number: 6ES7138-4FS01-4AB1
1 x ET 200S, F-Digital Input, 4/8 F-DI, DC 24V 6ES7138-4FA04-0AB0
1 x ET 200S, F-Digital Output, 4 F-DO, DC 24V/2A 6ES7138-4FB03-0AB0
1 x ET 200S, F-Relay Output 1 F-RO DC 2 Closer 24V/5A AC24V..230/5A 6ES7138-4FR00-0AA0
3 x ET 200S, Terminal Module, TM-E30S44-01 6ES7193-4CG20-0AA0
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 73 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMATIC ET 200S F-Technology
1x ET 200S,
F-Digital Input,
4/8 F-DI, DC 24V
1x ET 200S,
F-Digital Output,
4 F-DO, DC 24V/2A
3x ET 200S,
Terminal Module,
TM-E30S44-01
1x ET 200S,
1 Relaisausgang
1 F-RO DC (2 Schließer)
24V/5A AC24V..230/5A
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 74 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMATIC S7-315T Technology-PLC
Motion Control
System requirements: 64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, Windows XP Professional SP3
Sales note:
For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research
institutions and non commercial training departments!
Technical note: STEP 7 V5.5 required
Order number: 6ES7315-6TH13-0AB1
1 x Rail L=480mm 6ES7390-1AE80-0AA0
1 x power supply PS 307, AC 120/230V; DC 24V, 5A 6ES7307-1EA01-0AA0
1 x CPU315T-2 DP with 128 KByte main memory 6ES7315-6TH13-0AB0
2 x Front connector for CPU, 40-Pole 6ES7392-1AM00-0AA0
1 x Micro Memory Card 8 MByte 6ES7953-8LP20-0AA0
1 x Digital Module SM 323, 16 DE and 16 DA, DC 24V, 0,5A, 40-Pole 6ES7323-1BL00-0AA0
1 x SIMATIC S7-300, Interface Module IM174 6ES7174-0AA10-0AA0
for connecting analog drives and Step Drives via isochronous PROFIBUS
1 x Front Connector for IM, 40-Pole- 6ES7392-1AM00-0AA0
1 x SIMATIC NET, connection cable 830-2 for PROFIBUS, 6XV1830-2AH30
preassembled cable, two Sub-D-connectors 9-Pole, switchable terminating resistors, 3m
1 x SIMATIC S7, PC Adapter USB A2 for connection of S7-200/300/400, C7; USB-Cable, 5m 6GK15710BA00-0AA0
1 x SIMATIC S7, S7-Technology V4.2, SP3 Optional Package for STEP 7, Floating License 6ES7864-1CC42-0YA5
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 75 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMATIC S7-315T Technology-PLC
Motion Control
1x Power Supply PS 307,
AC 120/230V; DC 24V, 5A
3x Front Connector
For SM, 40-Pole
1x Digital Module SM 323,
16 DI and 16 DO, DC 24V,
0,5A, 40-Pole
1x SIMATIC S7-300,
Interface Module IM174,
Connection for analog
Drives and Step Drives
via isochronous PROFIBUS
1x SIMATIC S7,
S7-Technology V4.2 SP2
Options Package
at STEP 7,
Floating License
1x CPU315T-2 DP
with 128 KByte
Working Memory
1x Rail
L=480mm
1x Micro Memory Card
8 MByte
Overview / List / Graphic / Cabinet
PC Adapter
USB
TIA Portal siemens.com/tia-portal/details
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 76 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
System requirements:
Sales note:
32 BIT: Windows 7 Professional, Ultimate SP1, WINDOWS XP Professional SP3
For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research
institutions and non commercial training departments!
Technical note: STEP 7 V5.5, V11 or V12 required
Order number: 6ES7677-1FD00-4AB1
SIMATIC S7-mEC – Modular Embedded
1 X EC31-RTX F, 1 GB RAM, 4 GB FLASH DISK WITH PREINSTALLED SW: WINDOWS XP EMBEDDED; SIMATIC WINAC RTX F,
SIMATIC SOFTNET-S7/ LEAN, INTERFACES: 1. IF: 2X PROFINET, 2. IF: 1X FAST ETHERNET, 3. IF: 2 X USB, MMC SLOT,
DOCUMENTATION ON CD/DVD, RESTORE CD/DVD
6ES7677-1FD10-0FB0
1 X EXTENSION MODULE FOR UP TO 3 ADDITIONAL PCI-104 CARDS,
(USING OF PC/104 PLUS CARDS WITH ADDITIONAL ADAPTER POSSIBLE) 6ES7677-1DD40-1AA0
1 X EXTENSION MODULE FOR ADDITIONAL CONNECTORS 2 X USB, 1 X ETHERNET GB, 1 X COM, 1 X DVI-I, 1 X SLOT CF 1 X SLOT
SD/MMC 6ES7677-1DD50-2AA0
1 X SIMATIC S7-300, RAIL L=2000MM 6ES7390-1BC00-0AA0
1 X POWER SUPPLY PS307 INPUT: 120/230V AC OUTPUT: DC 24 V DC/10 A 6ES7307-1KA02-0AA0
1 X DIGITAL MODULE SM 323, 16 DI AND 16 DO, 24V DC, 0.5A, AGGREGATE CURRENT 4A 6ES7323-1BL00-0AA0
1 X ANALOG MODULE SM 334, 4 AI/2 AO, 1 X 20 POLE 6ES7334-0CE01-0AA0
1 X SIMULATOR MODULE SM 374, FOR SIMULATING 16 INPUTS OR 16 OUTPUTS RESP
8 INPUTS AND 8 OUTPUTS; 16 SWITCHES, 16 LED 6ES7374-2XH01-0AA0
1 X FRONT CONNECTOR WITH SCREW CONTACTS, 40-POLE 6ES7392-1AM00-0AA0
1 X FRONT CONNECTOR WITH SCREW CONTACTS, 20-POLE 6ES7392-1AJ00-0AA0
1 X WINAC ODK V4.2, SINGLE LICENSE FOR 1 INSTALL., E-SW, SW AND DOCU ON CD 6ES7806-1CC03-0BA0
1 X F PROGRAMMING TOOL DISTRIBUTED SAFETY V5.4, FLOATING LICENSE FOR 1 USER 6ES7833-1FC02-0YA5
Complementary to: Trainer Package
F-Technology S7-300 –
PROFINET 6ES7326-2FS00-4AB1
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 77 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMATIC S7-mEC – Modular Embedded
SIMATIC S7-mEC Combines the advantages of S7-Controller with a PC-based control PC-based control solution. You can automate a variety of tasks on a hardware solution will be
integrated. S7-mEC is characterized by its modular construction method in the S7-300-design and with S7-300 modules. HW base is the latest PC technology.
1x Rail L = 2000mm
1x Power Supply PS 307,
AC 120/230V; DC 24V, 10A
1x EC31-RTX F
1x Front Connector for
SM, 40-Pole
1x Analog Module SM 334,
4 AE/2 AA, 20-Pole
1x Front Connector for
SM, 20-Pole
1x Digital Module SM 323,
16 DI and 16 DO, DC 24V,
0,5A, 40-Pole
1x Distributed Safety V5.4,
Floating License
1 x Simulator Module
SM 374
1x WINAC ODK V4.2,
Single License
Recommended accessory: 6XV1870-3RH60
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD
RJ45/RJ45, CROSSED TP CABLE 4X2, PREASSEMBLED
WITH 2 RJ45 CONNECTORS, LENGTH 6 M
Recommended accessory: 6GK1950-
0BB00
Trainer Package:
FASTCONNECT Accessories Kit
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 78 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMATIC WinAC RTX F 2010 PC-based Control
1x WinAC Basis RTX F 2010 (6ES7671-1RC08-0YA0)
1x CP 5622 PCI EXPRESS X1-CARD FOR CONNECTING A PG OR PC
WITH PCI EXPRESS-BUS TO PROFIBUS OR MPI (6GK1562-2AA00)
Single License for 1 Installation
Runtime-SW, SW and
Documentation on DVD
SW-Class A, 3-speaking (D,E,F)
Reference-Hardware: SIMATIC PC, SIMATIC S7-mEC
System requirements: 32 BIT: Windows 7 Professional, Ultimate SP1, Windows XP Professional SP3, INTERVALZERO RTX
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research
institutions and non commercial training departments!
Technical note: License Key on USB-Stick
Order number: 6ES7671-1RC08-0YS0
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 79 Industry Sector
Industrial Communication
• Overview
• SINEMA Network Monitoring Software
• CP343-1 Advanced
• Switch X208
• Security Switch
• FASTCONNECT Accessories Kit
• IWLAN
• Development Kit
Overview / List / Graphic / Cabinet
Training curriculums siemens.com/sce/modules
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 80 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SINEMA V12 – Network Monitoring Software
System requirements: 64 BIT: WINDOWS 7 Professional, Ultimate SP1
32 BIT: WINDOWS 7 Professional, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research
institutions and non commercial training departments!
Technical note: Authorization on USB-Stick
Order number: 6GK1950-0BB06
6 X SINEMA SERVER BASIC-50 V12 6GK1781-1BA12-0AA0
SINEMA SERVER 50 V12 NETWORK MONITORING SOFTWARE FOR 50 IP DEVICES VIA WEB BROWSER
AUTOM. RECOGNITION+DISPLAY OF IE/PNIO/WLAN DEVICES+ TOPOLOGY IN NET. HMI INTEGRATION
VIA OPC/HTTP(S). REPORTING, STATISTICS + ALARMS SERVER OVERVIEW + ADAPTABLE PROFILES, SW,
MANUAL (DVD) + SINGLE LICENSE (USB) CLASS A, LANGUAGES (G,E,FR,CH); WIN XP+SP3 WIN 7+SP1
(32/64 BIT) + WIN SERVER 2008 R2+SP1
Overview / List / Graphic / Cabinet
SW functional identical to
the industrial version
Check HW Compatibility
for TIA Portal More
TIA PORTAL
TIA Portal siemens.com/tia-portal/details
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 81 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMATIC CP343-1 Advanced
1 x SIMATIC CP 343-1 Advanced 6GK7343-1GX31-0XE0
SIMATIC NET CP 343-1 ADVANCED; FOR CONNECTING SIMATIC S7-300 CPU TO IND. ETHERNET; PROFINET I/O
CONTROLLER AND/OR IO-DEVICE; RT AND IRT MRP, PROFINET CBA; TCP/IP; ISO,UDP,S7-COM,S5-KOMP.
COM., (SEND/RECEIVE) W. FETCH/WRITE WITH AND WITHOUT RFC 1006, MULTICAST DIAGNOSIS EXTENSION,
SNMP, DHCP, FTP CLIENT/SERVER, E-MAIL, GIGABIT-SS1X RJ45 (10/100/1000) PROFINET-SS 2X
RJ45(10/100MBIT) PROFINET CBA; SECURITY (FIREWALL/VPN); PROFIENERGY
System requirements: 64 BIT: WINDOWS 7 Professional, Ultimate SP1
32 BIT: WINDOWS 7 Professional, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research
institutions and non commercial training departments!
Technical note: None available
Order number: 6GK1950-0AA07
Overview / List / Graphic / Cabinet
Recommended accessory: 6XV1870-3RH60
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CROSSED
TP CABLE 4X2, PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M
Recommended accessory: 6GK1950-0BB00
Trainer Package:
FASTCONNECT Accessories Kit
TIA Portal siemens.com/tia-portal/details
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 82 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
Switch Technologies – Scalance X208 / SIMATIC NET
System requirements: 64 BIT: WINDOWS 7 Professional, Ultimate SP1
32 BIT: WINDOWS 7 Professional, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research
institutions and non commercial training departments!
Technical note: None available
Order number: 6GK1950-0BB02
1 x SCALANCE X208 6GK5208-0BA10-2AA3
SIMATIC NET, SCALANCE X208, MANAGED IE SWITCH, 8 X 10/100MBIT/S RJ45 PORTS, LED
DIAGNOSTICS, ERROR SIGNAL CONTACT WITH SET BUTTON, REDUNDANT POWER SUPPLY,
PROFINET-IO DEVICE, NETWORK MANAGEMENT, INTEGRATED REDUNDANCY MANAGER,
INCL. ELECTRONIC MANUAL ON CD
1 x SIMATIC NET, C-PLUG 6GK1900-0AB00
SIMATIC NET, C- PLUG REPLACEABLE , FOR SIMPLE DEVICE EXCHANGE IN CASE OF FAILURE,
FOR STORAGE OF CONFIGURATION OR USER DATA, APPLICATION IN SIMATIC NET PRODUCTS
WITH C-PLUG SLOT
Overview / List / Graphic / Cabinet
Core product for vocational
World Cup Industrial Control
More: www.siemens.com/worldskills
Recommended accessory: 6XV1870-3RH60
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CROSSED
TP CABLE 4X2, PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M
Recommended accessory: 6GK1950-0BB00
Trainer Package:
FASTCONNECT Accessories Kit
TIA Portal siemens.com/tia-portal/details
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 83 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
Industrial Security Switch Technologies – SCALANCE S623
System requirements: 64 BIT: WINDOWS 7 Professional, Ultimate SP1
32 BIT: WINDOWS 7 Professional, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research
institutions and non commercial training departments!
Technical note: None available
Order number: 6GK1950-0BB03
2 x SIMATIC NET SCALANCE S 623 6GK5623-0BA10-2AA3
SCALANCE S 623 MODULE FOR PROTECTION OF UNITS AND NETWORKS IN AUTOMATION TECHNOLOGY AND
FOR PROTECTION OF INDUSTRIAL COMMUNICATION VIA VPN AND FIREWALL; ADDITIONAL DMZ-PORT FOR
CONNECTING AN ADDITIONAL NETWORK ADDITIONAL FUNCTIONS: ADDRESS CONVERSION
1 x SOFTNET SECURITY CLIENT V4 + HF1 6GK1704-1VW04-0AA0
SIMATIC NET INDUSTR. ETHERNET SOFTNET SECURITY CLIENT V4+HF1 SW FOR CONFIGURING SAFE IP
BASED VPN-CONNECTIONS FROM PC/PG TO NETWORK SEGMENTS, WHICH ARE FUSED BY SCALANCE S,
SINGLE LICENSE F.1 INSTALLATION R-SW, SW + ELECTR. MAN. ON CD SW 2-LANGUAGES (G,E); MANUAL
5-LANG. (G, E, F, I, S) FOR WINDOWS 7 ULTIMATE, PROFESSIONAL, AND 32BIT WINDOWS XP PRO+SP3
2 x SIMATIC NET, C-PLUG 6GK1900-0AB00
SIMATIC NET, C- PLUG REPLACEABLE , FOR SIMPLE DEVICE EXCHANGE IN CASE OF FAILURE,
FOR STORAGE OF CONFIGURATION OR USER DATA
Overview / List / Graphic / Cabinet
Recommended accessory: 6XV1870-3RH60
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CROSSED
TP CABLE 4X2, PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M
Recommended accessory: 6GK1950-0BB00
Trainer Package:
FASTCONNECT Accessories Kit
TIA Portal siemens.com/tia-portal/details
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 84 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMATIC NET – IWLAN
System requirements: 32 BIT: Windows Vista Business SP1, Ultimate SP1, WINDOWS XP Professional SP3
Sales note:
For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research
institutions and non commercial training departments
Technical note: None available
Order number: 6GK1950-0BB04 (ROW-Version) 6GK1950-0BB05 (USA-Version)
1 x 6GK1782-0AA00-6AA0
SINEMA E STANDARD ENGINEERING SOFTWARE FOR PLANNING + AUTOPLACEMENT + CONFIGURATION
SIMULATION + OPTIMIZATION + SITE SURVEY OF WLAN SOFTWARE + MANUAL ON CD SINGLE LICENSE ON USB
1 x 6GK5788-2AA60-6AA0 (ROW Version) or 6GK5788-2AA60-6AB0 (USA Version)
SIMATIC NET, IWLAN DUAL ACCESS POINT SCALANCE W788-2RR, 2 RADIO INTERFACES, IEEE 802.11 B/G/A/H, INDUSTRIAL
WIRELESS LAN WITH RAPID ROAMING (IWLAN RR), 2.4/5 GHZ, UP TO 54MBIT/S, WPA2/802.11I/11E, 2XANT 795-4MR, IP67 HYBRID
PLUG CONNECTOR, MANUAL ON CD
2 x 6GK5747-1AA60-6AA0 (ROW Version) or 6GK5747-1AA60-6AB0 (USA Version)
SIMATIC NET, IWLAN RR ETHERNET CLIENT MODULE SCALANCE W747-1RR, 1 RADIO INTERFACE, IEEE 802.11B/G/A/H,
INDUSTRIAL WIRELESS LAN WITH RAPID ROAMING (IWLAN RR), INCLUDES 2XANT 795-4MR, IP67 HYBRID PLUG CONNECTOR
3 x SIMATIC NET, C-PLUG 6GK1900-0AB00
1 x 6GK1907-0DC10-6AA3
SIMATIC NET, IE POWER M12 CABLE CONN. PRO - SOCKET FOR CONNECT. OF SCALANCE W-700/X208PRO FOR 24V
DC VOLTAGE SUPPLY, 4-POLE, A-CODED, WITH MOUNTING INSTRUCTION, 3 PIECES
20 M 6XV1812-8A
SIMATIC NET ENERGY CABLE, 2X0,75
Overview / List / Graphic / Cabinet
Recommended accessory: 6GK1950-0BB00
Trainer Package:
FASTCONNECT Accessories Kit
TIA Portal siemens.com/tia-portal/details
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 85 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
FASTCONNECT Accessories Kit
1 X 6GK1901-1GA00 FASTCONNECT STRIPPING TOOL
2 X 6GK1901-1BB10-2AB0 SIMATIC NET IE FC RJ45 PLUG 180 2X2, RJ45 PLUG CONNECTOR (10/100MBIT/S) WITH RUGGED METAL
HOUSING AND FC CONNECTING METHOD FOR IE FC CABLE 2X2, 180 DGR CABLE OUTLET 1 PACK = 10 PCS
4 X 6GK1901-1BB20-2AA0 SIMATIC NET IE FC RJ45 PLUG 90 2X2, RJ45 PLUG CONNECTOR (10/100MBIT/S) WITH RUGGED METAL
HOUSING AND FC CONNECTING METHOD FOR IE FC CABLE 2X2 90 DGR CABLE OUTLET 1 PACK = 1 PCS
1 X 6GK1901-0DB20-6AA8 SIMATIC NET IE FC M12 PLUG PRO M12 PLUG CONNECTOR WITH RUGGED METAL HOUSING AND FC
CONNECTING METHOD, WITH AXIAL CABLE OUTLET (D CODED)1 PACKAGE = 8 PCS FOR SCALANCE X208 PRO
AND ET 200 PRO PN
1 X 6GK1907-0DC10-6AA3 M12 CABLE CONN. PRO - SOCKET FOR CONNECTION OF SCALANCE W-700/X208PRO FOR 24V DC
VOLTAGE SUPPLY, 4-POLE, A-CODED, WITH MOUNTING INSTRUCTION, 3 PCS
1 X 50 M - 6XV1870-2B FLEXIBLE CABLE, GP 2X2 TP INSTALLATION CABLE WITH FLEXIBLE STRAND, PROFINET TYP B, 4WIRE
2 X 6XV1870-3RH60 SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2,
PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M
System requirements: None
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research
institutions and non commercial training departments!
Technical note: None available
Order number : 6GK1950-0BB00
Overview / List / Graphic / Cabinet
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 86 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
Development Kit – PROFINET & PROFISAFE
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research
institutions and non commercial training departments!
Technical note: Support by ComDeC - Communication, Development & Certification www.siemens.com/comdec
Order number: 6ES7195-3BT02-0YA0
More in Internet Here
1 x SIMATIC NET, DK-ERTEC 200 PN IO 6GK1953-0BA00
DVELOPMENT PACKAGE FOR PN IO DEVICE
BASED ON ERTEC 200 INCL 10 ERTEC 200,
EVALUATION BOARD EB 200,
TEST-APPLICATION SOFTWARE,IE FC PLUG,
CABLE, STRIPPING TOOL, CP 1616,
DK-16XX PN IO, DOKU, V2.0 RT
AND IRT FUNCTIONALITY
1 x PROFISAFE-STARTERKIT V3.4 6ES7195-3BF02-0YA0
(FOR V1-MODE AND V2-MODE PROFISAFE-DEVICES)
Overview / List / Graphic / Cabinet
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 87 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
Development Kit – PROFIsafe-Starterkit
Hardware
CP1616
• A PCI-card for the usage inside the PC as PROFINET IO Controller (test partner)
• The Evaluation Board 200 (EB 200) (for DK-ERTEC 200 PN IO V3.2)
• A testing environment for PROFINET IO Devices for custom based applications.
ERTEC ASICs
• For the development of custom based Hardware are included 10x ERTEC 200 (- for DK-ERTEC 200 PN IO V3.2)
PROFINET cabling/ -plugs
• For the configuration of a PROFINET cable are per Development Kit two FASTCONNECT plugs, one PROFINET cable, as well as one
Stripping Tool included.
Power Supply
• Every Development Kit contains one Universal AC adaptor to power the Evaluation Boards.
Documentation
• Comprehensive range of documentation in English and German language is included on the CD.
Software
• DK-ERTEC 200 PN IO V3.2
• PROFINET Device Stack including application examples in source code to port to the included Evaluation Board;
• DK-16xx PN IO;
• Firmware to engineer the test partner of the CP1616 to use with Linux or WINDOWS XP, or to port to other PC-based operating systems
Overview / List / Graphic / Cabinet
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 88 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
Development Kit – PROFIsafe-Starterkit Details
• Current PROFIsafe-specifications with current PROFIsafe-certificates
• PROFIsafe-driver-Software (as core components of the development kit)
Example-GSD-File for STEP 7 (for PROFIBUS DP/PA development kit and DK-ERTEC 200 PN IO)
Example-Project for S7-319F (for PROFIBUS DP/PA development kit DK-ERTEC 200 PN IO)
• GSD-Tools (i.e. GSD Editor and CRC-calculation-Tool)
• iParServer-Software and Tutorial (FB24)
• Tool-Calling-Interface-Example and Tutorial
• F-Programming-Guidelines
• Layer stack (V1SL and PN IO)
• Example-Firmware (for PROFIBUS DP/PA development kit and DK-ERTEC 200 PN IO)
Project for example for application development system environment (for PROFIBUS DP/PA development kit and DK-
ERTEC 200 PN IO)
Slow-Motion-Monitor (for PROFIBUS: PG-PC and CP5613, for PROFINET: PG-CP1616)
• Extensive documentation
Overview / List / Graphic / Cabinet
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 89 Industry Sector
Sensor Technologies
• Overview
• SIMATIC VS120 Vision Sensor
• SIMATIC VS130-2 Codeleser
• SIMATIC RF300 RFID System
• SIWAREX weighing systems
Overview / List / Graphic / Cabinet
Training curriculums siemens.com/sce/modules
• SIMATIC RF200 RFID System
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 90 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMATIC Vision Sensor (VS120) – Form Check
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research
institutions and non commercial training departments!
Technical note: Parameterization with web based HM with Browser starting from IE5.5, JAVA-VM (MS, SUN)
STEP 7 V5.4 + SP 5 is required
Order number: 6GF9010-1AA00-0AA0
1 x SIMATIC VS120 evaluation device 6GF1018-2AA10
1 x SIMATIC Vision Sensor VS120, documentation package 6GF7021-1AA10
1 x Lens 12mm 6GF9001-1BL01
x Sensor Head white Light C/CS-Mount 6GF2002-8CB
1 x SIMATIC VS, Power Supply Cable, 10m 6GF9002-8CA
1 x SIMATIC VS, communications cable, 10m 6GF9002-8CB
1 x SIMATIC VS, Sensor-Cable, 2,5m 6GF9002-8CD
1 x Light red, diffuse 6GF9004-8BA
1 x Light Cable 6GF9002-8CE
1 x Intermediate Ring 6GF9001-1BU
Overview / List / Graphic / Cabinet
Recommended accessory: 6XV1870-3RH60
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CROSSED
TP CABLE 4X2, PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M
Recommended accessory: 6GK1950-0BB00
Trainer Package:
FASTCONNECT Accessories Kit
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 91 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMATIC Vision Sensor (VS120) – Form Check
1x Light red, diffuse 6GF9004-8BA
1x Lens 12mm 6GF9001-1BL01
1x SIMATIC VS120
Evaluation device 6GF1018-2AA10
1x Sensor Head
C/CS-Mount 6GF2002-8CB
Recommended accessory: 6XV1870-3RH60
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD
RJ45/RJ45, CROSSED TP CABLE 4X2, PREASSEMBLED
WITH 2 RJ45 CONNECTORS, LENGTH 6 M
Recommended accessory:
6GK1950-0BB00
Trainer Package:
FASTCONNECT Accessories Kit
Content
Overview / List / Graphic / Cabinet
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 92 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMATIC Vision Sensor (VS130-2 1D/2D-Code Reading)
1 x SIMATIC VS130-2 evaluation device 6GF1018-3BA
1 x SIMATIC Vision Sensor VS130-2, documentation packages 6GF7031-1BA
1 x Lens 15mm 6GF9001-1BG01
1 x Sensor Head White Light C/CS-Mount 6GF2002-8CB
1 x SIMATIC VS, Power Supply Cable, 10m 6GF9002-8CA
1 x SIMATIC VS, Communications-Cable, 10m 6GF9002-8CB
1 x SIMATIC VS, Sensor Cable, 2,5m 6GF9002-8CD
1 x Light red, diffuse 6GF9004-8BA
1 x Light Cable 6GF9002-8CE
1 x Intermediate Ring 6GF9001-1BU
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research
institutions and non commercial training departments!
Technical note: Parameterization with web based HM with Browser starting from IE5.5, JAVA-VM ( MS, SUN )
STEP 7 V5.4 + SP 5 is required
Order number: 6GF9010-1AB00-0AA0
Barcode
(1D-Code)
Data Matrix Code
(2D-Code)
Overview / List / Graphic / Cabinet
Recommended accessory: 6XV1870-3RH60
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CROSSED
TP CABLE 4X2, PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M
Recommended accessory: 6GK1950-0BB00
Trainer Package:
FASTCONNECT Accessories Kit
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 93 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMATIC Vision Sensor (VS130-2 1D/2D-Code Reading)
Recommended accessory: 6XV1870-3RH60
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD
RJ45/RJ45, CROSSED TP CABLE 4X2, PREASSEMBLED
WITH 2 RJ45 CONNECTORS, LENGTH 6 M
Recommended accessory:
6GK1950-0BB00
Trainer Package:
FASTCONNECT Accessories Kit
1x Light red, diffuse 6GF9004-8BA
1x Lens 15mm 6GF9001-1BG01
1x SIMATIC VS120
Evaluation device 6GF1018-2AA10
1x Sensor Head
C/CS-Mount 6GF2002-8CB
Content
Overview / List / Graphic / Cabinet
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 94 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMATIC RFID – RF200
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research
institutions and non commercial training departments!
Technical note: None available
Order number: 6GT2096-3AA00-0AA0
Overview / List / Graphic / Cabinet
2 SIMATIC RF200 READER RF240R; RS422-INTERFACE (3964R); WITH INTEGRATED ANTENNA 6GT2821-4AC10
1 RFID COMMUNICATION MODULE RF180C FOR PN; 2 READERS CONNECTABLE; WITHOUT CONNECTING BLOCK
FOR PROFINET 6GT2002-0JD00
1 RFID PROFINET- / ETHERNET- CONNECTING BLOCK PUSH-PULL RJ45 FOR RF180C, RF182C 6GT2002-2JD00
1 POWER PLUG PRO, 5-POLE PUSH PULL POWER PLUG FOR ON-SITE MOUNTING (PACKAGING UNIT: 1 PLUG) 6GK1907-0AB10-6AA0
1 IE FC RJ45 PLUG PRO; IP65; FAST CONNECT; IE; RJ45 PUSH PULL PLUG FOR ON-SITE MOUNTING TO IE FC TP
CABLE 2X2; (PACKAGING UNIT 1 PLUG) 6GK1901-1BB20-6AA0
2 SIMATIC RF, MV CONNECT. CABLE, PREASSEMBLED, BETWEEN ASM 456, RF160C, RF170C, RF18XC AND READER
OR EXTENSION CABLE FOR ASM 456, RF160C, RF170C, RF18XC WITH RF, MV, MOBY PUR, CMG, LENGTH 2 M 6GT2891-4FH20
1 RFID SYSTEMS SOFTWARE & DOCUMENTATION ON DVD, FB/FC FOR SIMATIC, RFID PC LIBRARIES, RFID TOOLS 6GT2080-2AA20
5 MOBY D / RF300 ISO / RF200 TRANSPONDER MDS D400 ISO-CARD, 2000 BYTE (NETTO) 6GT2600-4AD00
5 MOBY D / RF300 ISO MOBILE DATA STORAGE MDS D460, ACCORDING TO ISO 15693; 2000 BYTE FRAM; 6GT2600-4AB00
5 MOBY D / RF300 ISO SPACER FOR MDS D160 / MDS D460; DIAMETER 20 MM; HEIGHT 15 MM 6GT2690-0AG00
5 RF200 / RF300 ISO TRANSPONDER MDS D423; TRANSPONDER IN AND ON METAL ACCORDING;2000 BYTE FRAM 6GT2600-4AA00
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 95 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMATIC RFID – RF200 Content
Overview / List / Graphic / Cabinet
2 x RF200 READER
RF240R
1 x COMMUNICATION
MODULE RF180C
1 x PROFINET/ETHERNET
CONNECTING BLOCK
1 x POWER PLUG PRO 1 x PUSH PULL PLUG
2 x Terminal Cable
1x RFID- Software and
documentation
5 x TRANSPONDER
MDS D400 ISO-CARD
5 x MOBILER
DATA STORAGE
5 x SPACER 5 x TRANSPONDER
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 96 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMATIC RFID – RF300
1 RFID COMMUNICATION MODULE RF180C FOR PROFINET; 2 READERS CONNECTABLE 6GT2002-0JD00
1 RFID PROFINET-/ETHERNET- CONNECTING BLOCK 6GT2002-2JD00
2 RF300/600 CONN. CABLE PREASSEMBLED, LENGTH: 2 M 6GT2891-4FH20
1 RFID SYSTEMS SOFTWARE PACKAGE AND DOCUMENTATION ON CD 6GT2080-2AA20
1 RF300 READER RF340R (RF300+ISO15693) WITH RS422 AND INTEGRATED ANTENNA 6GT2801-2AB10
1 POWER PLUG PRO, 5-POLE PUSH PULL 6GK1907-0AB10-6AA0
1 RF300 READER RF310R (RF300+ISO15693) WITH RS422 AND INTEGRATED ANTENNA 6GT2801-1AB10
5 TRANSPONDER RF340T 8 KBYTE FRAM 6GT2800-4BB00
10 TRANSPONDER RF360T EPOXY-CARD, 8 KBYTE FRAM 6GT2800-4AC00
20 MOBY D / RF300 ISO MOBILE DATA MEMORY MDS D124 , 112 BYTE EEPROM 6GT2600-0AC10
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research
institutions and non commercial training departments!
Technical note: None available
Order number: 6GT2096-1AA00-0AA0
Overview / List / Graphic / Cabinet
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 97 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMATIC RFID – RF300
SIMATIC
RF180C
SIMATIC
RF180C
Tank monitoring by RFID Nameplates, documentation of
process data
1x PROFINET
Communication
Module RF180C with RJ45
Connector Terminal Block
in IP67
1x Software and
documentation
2x Terminal Cable between
Reader RF340R and
Connect Module RF180C
1x Power Supply
Cable for RF180C
1x SIMATIC RF340R
Reader 75x75x41
20x MDS D124
Mobile data memory
112 Byte EEPROM
10x SIMATIC RF360T
Transponder
8kByte Memory
5x SIMATIC RF340T
Transponder
8kByte Memory
1x SIMATIC RF310R
Reader 55x75x30
Content
Overview / List / Graphic / Cabinet
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 98 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMATIC SIWAREX Weighing Systems
System requirements: None
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research
institutions and non commercial training departments!
Technical note: None available
Order number: 7MH4901-0AA10
1 x SIWAREX FTA
- Project engineering package FTA
- Connecting cable (RS232C)
- Documentation on CD
1 x SIWAREX U
- Project engineering package U
- Connecting cable (RS232C)
- Documentation on CD
1 x Load cell series BB, nominal load 10kg
1 x base plate with overload protection
1 x Elastomer bearing
1 x License agreement
Overview / List / Graphic / Cabinet
SIWAREX U SIWAREX FTA Wägezelle Baureihe BB
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 99 Industry Sector
Drive Technologies
• SINAMICS G120 Standard drive 400V with and without Filter
• SINAMICS S120 Servo drive
• SIMOTION D410 add on for S120
230V 400V
• Overview
Complete didactic solutions from Partners: www.siemens.com/sce/partner
Overview / List / Graphic / Cabinet
Training curriculums siemens.com/sce/modules
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 100 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SINAMICS G120 standard drive 3 AC 400V-Network
Overview
Power Module
PM240 – 0.55kW
with /without EMV-Filter A
Software in Package
STARTER
S7-300
Controller
G120-Trainer Package 3AC 400V – 0.55kW PROFINET
Power line
Asynchronous motor
i.e.. 1Le!
rate output: 0,75kW, 4-Pole,
rotational speed 1370 rpm
CIRCUIT-BREAKER
PC-CONVERTER CONNECTION KIT
Not part of the package
Overview / List / Graphic / Cabinet
Control Unit
PROFINET CU240E-2 PN-F
with OPERATOR PANEL (IOP)
TIA Portal siemens.com/tia-portal/details
Recomendation
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 101 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SINAMICS G120 standard drive 3 AC 400V-Network
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research
institutions and non commercial training departments!
Technical note: Consider subsequent slide
Order number: 6SL3200-3AX00-0AL0 6SL3200-3AX00-0UL0
1 SINAMICS G120 CONTROL UNIT CU240E-2 PN-F E-TYPE SAFETY INTEGRATED STO, SS1, SLS,
PROFINET 6DI, 3DO, 2AI, 2AO, MAX 3F-DI PTC/KTY INTERFACE USB- AND SD/MMC-INTERFACE
PROTECTION IP20 AMBIENT TEMP 0 TO +50 DEG C WITHOUT POWER MODULE
6SL3244-0BB13-1FA0
1 SINAMICS G120 INTELLIGENT OPERATOR PANEL (IOP) 6SL3255-0AA00-4JA0
1 SINAMICS G120 SHIELD CONNECTION KIT 3 INCL. SCREENING PLATE AND FIXING ELEMENTS 6SL3264-1EA00-0HB0
1 SINAMICS G120 PC-INVERTER CONNECTION KIT-2 3M USB-CABLE FOR CONTROL UNITS CU230P-2,
CU240B-2, CU240E-2 + SINAMICS G120C
6SL3255-0AA00-2CA0
Alternativ: without Filter
1 SINAMICS G120 POWER MODULE PM240-2 STANDARD WITHOUT FILTER WITH BUILT IN BRAKING
CHOPPER 3AC380-480V 196 X 73 X 165 (HXWXD), FSA PROTECTION IP20 WITHOUT CONTROL UNIT
AND PANEL
6SL3210-1PE12-3UL0 TP SL3200-3AX00-0UL0
Alterntiv: with Filter
1 SINAMICS G120 POWER MODULE PM240-2 STANDARD WITH BUILT IN CL. A FILTER WITH BUILT IN
BRAKING CHOPPER 3AC380-480V 196 X 73 X 165 (HXWXD), FSA PROTECTION IP20 WITHOUT
CONTROL UNIT AND PANEL
6SL3210-1PE12-3UL0 TP 6SL3200-3AX00-0UL0
Overview / List / Graphic / Cabinet
Core product for vocational
World Cup Industrial Control
More: www.siemens.com/worldskills
TIA Portal siemens.com/tia-portal/details
SINAMICS MICROMASTER STARTER Download SINAMICS Startdrive Download
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 102 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SINAMICS G120 standard drive 3 AC 400V-Network
optional Hardware
When selecting please ask the local Siemens technical sales department
Overview / List / Graphic / Cabinet
SIMOTICS GP LOW-VOLTAGE MOTOR
LOW-VOLTAGE MOTOR, IEC SQUIRREL-CAGE,SELF-VENTIL.,IP55 TEMP. CL. 155(F) ACC.TO 130(B)
ALUMINIUM HOUSING PREMIUM EFFICIENCY IE2, 2POLE * FS80M * 0,75KW (50HZ)
3 AC 50HZ 230VD/400VY * 3 AC 60HZ 460VY IM B 3, MOTOR PROTECTION
WITH 1 PTC THERMISTORS FOR SHUTDOWN TERMINAL BOX AT TOP
1LE1003-0DA22-2AB4
SINAMICS LINE REACTOR
380-480V 3AC 47-63HZ I_LN = 4,0A STANDALONE
6SL3203-0CE13-2AA0
MEMORY CARD SINAMICS 3,3V FLASH, 4MBYTE 6ES7954-8LC01-0AA0
CIRCUIT-BREAKER SZ S00 3RV2011-1EA10
CIRCUIT-BREAKER SZ S00, FOR MOTOR PROTECTION, CLASS 10, A-RELEASE 2.8...4A, N-RELEASE 52A,
SCREW CONNECTION, STANDARD SW. CAPACITY
ETHERNET CABLE 6XV1870-3RH60
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6,
CROSSED TP CABLE 4X2, PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M
Recomendation
TIA PORTAL
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 103 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SINAMICS G120 standard drive 3 AC 400V-Network
optional Software
When selecting please ask the local Siemens technical sales department
STARTER 6SL3072-0AA00-0AG0
STARTER COMMISSIONING TOOL FOR SINAMICS AND MICROMASTER VERSION V4.3.3
STARTDRIVE 6SL3072-4CA02-1XG0
SOFTWARE ON DVD: STARTDRIVE ENGINEERING- AND COMMISSIONG TOOL FOR SINAMICS VERSION V12 SP1
SIZER 6SL3070-0AA00-0AG0
SIZER FOR SIEMENS DRIVES DRIVE DESIGN TOOL
DRIVE ES BASIC V5.5 SP2 6SW1700-5JA00-5AA0
ENGINEERING-SW FOR DRIVES, 5-LANGUAGE CD
WITH ELECTR. DOCUMENTATION
FOR STEP 7 V5.4 FLOATING LICENSE
DRIVE ES SIMATIC V5.5 6SW1700-5JC00-5AA0
DRIVE ES SIMATIC V5.5 BLOCK LIBRARIES FOR SIMATIC S7
FOR COMMUNICATION WITH DRIVES 5-LANGUAGE CD; WITH ELECTR.
DOCUMENTATION
Overview / List / Graphic / Cabinet
Recomendation
TIA Portal siemens.com/tia-portal/details
TIA PORTAL
SINAMICS MICROMASTER STARTER Download SINAMICS Startdrive Download
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 104 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SINAMICS G120 – Information
Recommended catalog
SINAMICS G120: Siemens D31
Asynchronous motors: Siemens D81.1
Useful information for download
SINAMICS G120C (Catalogs and reference books…)
www.siemens.com/sinamics-g120C
Energy conservation with SINAMICS G120
www.siemens.com/energysaving
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
TIA PORTAL
SINAMICS MICROMASTER STARTER Download SINAMICS Startdrive Download
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 105 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SINAMICS S120 servo drive 1 AC 230V-Network
Control Unit
PROFINET
CU310 PN
Compact Flash Card
Power Module
PM340 - 0.37kW
with integrated filter
Basic Operator Panel
Network supply
1 AC 230V 50Hz
commutation choke
Software in Package
DCC SINAMICS
SIZER
CAD CREATOR
Starter
S7-300
Controller
S120-Package 1AC 230V – 0,37kW PROFINET
Power line
CIRCUIT-BREAKER
Not part of the package
Sensor-Cable-Drive-CLIQ
Terminal Module TM31 Add on Board for SINAMICS
CONVERTORS with digital and
analog Input and Outputs
Additional Safety Module TM 54 F 4 failsafe digital outputs
10 failsafe digital inputs
External Power Supply 24V-Power supply for
CU310 and
S120 Power module
Servo motor i.e. 1FK7022 with moment
of a torque 0.85 NM,
rotational speed 6000 rpm
absolute encoder with
DRIVE-CliQ
Servo motor i.e. 1FK7022 with moment
of a torque 0.85 NM,
rotational speed 6000 rpm
incremental encoder with
DRIVE-CliQ
Asynchronous motor i.e. LA7070-4 with rated
output: 0,25 kW , 4-pole,
rotational speed 1350 rpm
50Hz with/without speed
actual value encoder with
Sensor-Module SMC30
Accessory 1
Accessory 2
Accessory 3
Overview
Overview / List / Graphic / Cabinet
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 106 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SINAMICS S120 servo drive 1 AC 230V-Network
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocational school, Colleges and Universities, in-house vocational training departments, non commercial research
institutions and non commercial training departments!
Technical note: Consider subsequent slide
Order number: 6SL3080-8AB00-0AA0
Drive System
1 CONTROL UNIT CU310-2 PN 6SL3040-1LA01-0AA0
1 COMPACTFLASH CARD WITH FIRMWARE OPTION PERFORMANCE EXTENSION, CURRENT SOFTWARE
VERSION V4.06
6SL3054-0EGD0-0AA0
1 SINAMICS LICENSE SAFETY INTEGRATED 6SL3074-0AA10-0AA0
1 BASIC OPERATOR PANEL BOP20 6SL3055-0AA00-4BA0
1 SINAMICS S120 POWER MODULE PM340; INPUT: 1AC 200-240V, 50/60HZ, OUTPUT: 3AC 2,3A (0,37KW) 6SL3210-1SB12-3AA0
1 AC COMMUNICATION CHOKE 200V-240V 1AC 3,4A 6SE6400-3CC00-4AB3
1 SINAMICS SCREENING KIT FOR POWER MODULE FSA 6SL3262-1AA00-0BA0
Software
1 STARTER COMMISSIONING TOOL FOR SINAMICS 6SL3072-0AA00-0AG0
1 DCC SINAMICS 6AU1810-1HA22-1XA0
1 SIZER CONFIGURING TOOL DVD 6SL3070-0AA00-0AG0
Overview / List / Graphic / Cabinet
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 107 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SINAMICS S120 servo drive 1 AC 230V Network 1) Asynchrous motor with/without position value measuring
LOW-VOLTAGE SQUIRREL-CAGE MOTOR Type 1LA7
Rated output: 0,25 kW , rotational speed 1350 rpm 50Hz
Size 71M with foot-mounting B3 degree of protection IP55
Add-on Z = A23 motor protection with KTY 84-130
Add-on Z = H57 speed actual value encoder 1XP8001-1 HTL with 1024 pulses per rev
1LA7070-4AB10-Z
Z = A23 + H57
SIGNAL CABLE:
Between Sensor-Module SMC30 and CU310PN, DRIVE-CLIQ cable IP20/IP20 length: 0,95 m
6SL3060-4AA10-0AA0
Sensor Module SMC30:
For incremental encoder: HTL, for other encoder
6SL3055-0AA00-5CA2
SIGNAL CABLE:
Between Sensor-Module SMC30 and speed actual value encoder, Motion Connect 700, Signal A/B/R, length 2 m
6SX7002-0AN00-1AC0
Speed control - without actual speed encoder at the motor
Position- or Moment control with relative distance measurement
impulse generator at the Motor (with positioning at the reference point)
LOW-VOLTAGE SQUIRREL-CAGE MOTOR Type 1LA9
rated output: 0,25 kW , rotational speed 1350 rpm 50Hz, size 71M with foot-mounting B3 degree of protection IP55,
Add-on Z = A23 motor protection with KTY 84-130
1LA9070-4AB10-Z
Z = A23
Recommended Motors
When selecting please ask the local Siemens technical sales department
Overview / List / Graphic / Cabinet
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 108 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SINAMICS S120 servo drive 1 AC 230V Network 2a) Relative distance measurement with positioning at the reference point
SERVOMOTOR 1FK7022 0,85 Nm, 6000 RPM
NATURAL COOLING, MODEL IM B5 INCREMENTAL ENCODER 2048 S/R, RESOLUTION 22 BIT
WITH DRIVE-CLIQ INTERFACE, SMOOTH SHAFT, TOLERANCE N
1FK7022-5AK21-1DG0
POWER CABLE
PREASSEMBLED 4X1.5 C, CONNECTOR SIZE 1 MOTION-CONNECT 500; length 2 m 6FX5002-5CG01-1AC0
SIGNAL CABLE
PREASSEMBLED; DRIVE CLIQ CONNECTOR IP20/IP67, MOTION-CONNECT 500; length 2 m 6FX5002-2DC10-1AC0
SERVOMOTOR 1FK7032 1,1 Nm, 3000 RPM
NATURAL COOLING, MODEL IM B5 INCREMENTAL ENCODER 2048 S/R, RESOLUTION 22 BIT
WITH DRIVE-CLIQ INTERFACE; SMOOTH SHAFT, TOLERANCE N
1FK7032-5AF21-1DG0
POWER CABLE
PREASSEMBLED 4X1.5 C, CONNECTOR SIZE 1 MOTION-CONNECT 500; length 2 m 6FX5002-5CG01-1AC0
SIGNAL CABLE
DRIVE CLIQ CONNECTOR IP20/IP67, MOTION-CONNECT 500; length 2 m 6FX5002-2DC10-1AC0
When selecting please ask the local Siemens technical sales department
Overview / List / Graphic / Cabinet
Recommended Motors
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 109 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SINAMICS S120 servo drive 1 AC 230V Network 2b) Relative distance measurement with positioning at the reference point
SYNCHRONOUS SERVOMOTOR, 1FK7011 V 0.18 NM, 6000 RPM
NATURAL COOLING, IM B5 (IM V1, IM V3) POWER/SIGNAL CONNECTORS CONNECTOR CAN BE ROTATED
BY 270 DEGR. DEGREE OF PROTECTION IP64; PAINT FINISH RAL7016
1FK7011-5AK21-1JG3
POWER CABLE
PREASSEMBLED 4X1,5+(2X1,5) C; CONNECTOR SIZE 0.5 (1FK7 AH20 TO POWER MODULES AND AC/AC
DRIVES) UL/CSA DESINA, MOTION-CONNECT 500 DMAX=10,8 MM, LENGTH (M) =2
6FX5002-5DA30-1AC5
SINAMICS S120 SENSOR MODULE SMC20
INCREMENTAL ENCODER: SIN/COS 1VPP ABSOLUTE ENCODER: ENDAT WITHOUT DRIVE-CLIQ CABLE
30 MM WIDTH
6SL3055-0AA00-5BA2
SIGNAL CABLE
PREASSAMBLED (ABSOLUTE ENCODER IN THE MOTOR AH20) 3X2X0,14+4X0,14+2X0,5+4X0,22C WITH
M17 CONNECTOR UL/CSA DESINA MOTION CONNECT 500 DMAX = 9,9MM LENGTH (M)=2
6FX5002-2EQ20-1AC0
SINAMICS DRIVE-CLIQ CABLE IP20 LENGTH (M)= 0,95 6SL3060-4AA10-0AA0
When selecting please ask the local Siemens technical sales department
Overview / List / Graphic / Cabinet
Recommended Motors
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 110 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SINAMICS S120 servo drive 1 AC 230V Network 3a) Absolute distance measurement with singular initial positioning
at the reference point
SYNCHRONOUS SERVOMOTOR, 1FK7022, 0.85 NM, 6000 RPM,
NATURAL COOLING, IM B5 (IM V1, IM V3) POWER/SIGNAL CONNECTORS CONNECTOR CAN BE ROTATED
BY 270 DEGR.
1FK7022-5AK21-1DG0
POWER CABLE
PREASSEMBLED 4X1.5 C, CONNECTOR SIZE 1 (SINAMICS AC DRIVE) UL/CSA, DESINA, MOTION
CONNECT 500, DMAX = 8.4 MM, LENGTH (M) = 2
6FX5002-5CG01-1AC0
SIGNAL CABLE PREASSEMBLED (SINAMICS DRIVE CLIQ) CONNECTOR IP20/IP67, WITH 24 V MOTION-
CONNECT 500 LENGTH (M) = 2 6FX5002-2DC10-1AC0
SYNCHRONOUS SERVOMOTOR, 1FK7022, 1.1 NM, 3000 RPM,
NATURAL COOLING, IM B5 (IM V1, IM V3) POWER/SIGNAL CONNECTORS CONNECTOR CAN BE ROTATED
BY 270 DEGR
1FK7032-5AF21-1DG0
POWER CABLE
PREASSEMBLED 4X1.5 C, CONNECTOR SIZE 1 (SINAMICS AC DRIVE) UL/CSA, DESINA, MOTION
CONNECT 500, DMAX = 8.4 MM, LENGTH (M) = 2
6FX5002-5CG01-1AC0
SIGNAL CABLE
PREASSEMBLED (SINAMICS DRIVE CLIQ) CONNECTOR IP20/IP67, WITH 24 V MOTION-CONNECT 500
LENGTH (M) = 2
6FX5002-2DC10-1AC0
When selecting please ask the local Siemens technical sales department
Overview / List / Graphic / Cabinet
Recommended Motors
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 111 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SINAMICS S120 servo drive 1 AC 230V Network 3b) With absolute distance measurement with singular initial positioning
at the reference point
SYNCHRONOUS SERVOMOTOR, 1FK7011 V 0.18 NM, 6000 RPM
Natural cooling, model IM B5 absolute value transmitter EnDat 16 S/R
via Sensor module SMC20; smooth shaft, Tolerance N
1FK7011-5AK21-1JG3
POWER CABLE
Customized 4X1.5+ C, size connector 0.5
MOTION-CONNECT 500; length 2 m
6FX5002-5DA30-1AC0
SENSOR MODULEC SMC20
For absolute value transmitter EnDat 16 S/R
6SL3055-0AA00-5BA2
SIGNAL CABLE 1
Between Sensor-Module SMC20 and absolute value transmitter EnDat 16 S/R
MOTION CONNECT 500 with length 2 m
6FX5002-2EQ20-1AC0
SIGNAL CABLE 2
Between Sensor-Module SMC20 and CU310PN
SINAMICS DRIVE-CLIQ CABLE IP20/IP20 LENGTH: 0.95 M
6SL3060-4AA10-0AA0
When selecting please ask the local Siemens technical sales department
Overview / List / Graphic / Cabinet
Recommended Motors
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 112 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SINAMICS S120 servo drive 1 AC 230V Network
optional Hardware
CIRCUIT-BREAKER:
230/400V 6KA, 1POLE, C, 10A, T=70mm 5SY6110-7
POWER SUPPLY:
SITOP MODULAR SV INPUT: AC 120/230 - 500V, OUTPUT: DC 24V / 5A 6EP1333-3BA00
POWER SUPPLY:
LOGO!-POWER 24V ; INPUT : AC 100-240 V, OUTPUT: DC 24V / 4 A 6EP1332-1SH52
CABLE:
SIMATIC NET, INDUSTRIAL ETHERNET, TP XP CORD RJ45/RJ45, CAT 6, CROSSED ; length = 6m 6XV1870-3RH60
DOCUMENTATION: SINAMICS S120 on CD-ROM 6SL3097-2CA00-0YG5
TERMINAL MODULE TM31 EXTENSION:
FOR SINAMICS CONVERTORS S120 12 DI, 2 DA, 2 AE, 2 AA 6SL3055-0AA00-3AA1
TERMINAL MODULE TM54F SAFETY I/O EXTENSION :
FOR SINAMICS CONVERTORS WITH FAIL-SAFE IN- AND OUTPUTS 6SL3055-0AA00-3BA0
SIGNAL CABLE:
SINAMICS DRIVE-CLIQ CABLE IP20/IP20 LENGTH: 0.95 M 6SL3060-4AA10-0AA0
Recomendation
When selecting please ask the local Siemens technical sales department
Overview / List / Graphic / Cabinet
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 113 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SINAMICS S120 servo drive 1 AC 230V Network
Software optional
Overview / List / Graphic / Cabinet
When selecting please ask the local Siemens technical sales department
STARTER 6SL3072-0AA00-0AG0
STARTER COMMISSIONING TOOL FOR SINAMICS AND MICROMASTER VERSION V4.3.2
SIZER 6SL3070-0AA00-0AG0
SIZER FOR SIEMENS DRIVES DRIVE DESIGN TOOL
DRIVE ES BASIC V5.5 SP2 6SW1700-5JA00-5AA0
ENGINEERING-SW FOR DRIVES, 5-LANGUAGE CD
WITH ELECTR. DOCUMENTATION
FOR STEP 7 V5.4 FLOATING LICENSE
DRIVE ES SIMATIC V5.5 6SW1700-5JC00-5AA0
DRIVE ES SIMATIC V5.5 BLOCK LIBRARIES FOR SIMATIC S7
FOR COMMUNICATION WITH DRIVES 5-LANGUAGE CD; WITH ELECTR.
DOCUMENTATION
Recomendation
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 114 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SINAMICS S120 servo drive 3 AC 400V Network
Control Unit
PROFINET
CU310 PN
Compact Flash Card
Power Module
PM340 – 1,5 kW
Basic Operator
Panel
Network supply
3 AC 400V 50Hz
with power switch,
EMV-Filter,
commutation choke
Software in Package
DCC SINAMICS
SIZER
CAD CREATOR Starter
S7-300
Controller
S120-package 3AC 400V – 1.5kW PROFINET
Power line
CIRCUIT-BREAKER SIZE
Not part of the package
Sensor-Cable-Drive-CLIQ
Terminal Module TM31 ADD ON BOARD FOR SINAMICS
CONVERTORS WITH DIGITAL
AND ANALOG IN- AND OUTPUTS
External Power Supply 24V-Power supply for
CU310 and
S120 Power module
Servo motor i.e. 1FK7042
with torque 3,0 Nm
3000 U/min
absolute encoder
with DRIVE-CliQ,
Servo motor i.e. 1FK7042
with torque 3,0 Nm
3000 U/min
incremental encoder
with DRIVE-CliQ,
Asynchronous motor i.e. 1LA7096-4
power 1,5 kW, 4-pole,
1420 rpm, with / without
speed actual value
encoder via
Sensor-Module SMC30
Accessory A
Accessory B
Accessory C
Additional Safety Module TM 54 F 4 failsafe digital outputs
10 failsafe digital inputs
Overview
Overview / List / Graphic / Cabinet
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 115 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SINAMICS S120 servo drive 3 AC 400V-Network
Systemvoraussetzung: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocational schools, colleges and universities, in-house vocational training departments, non-commercial research
institutions and non-commercial training departments!
Technical note: Consider subsequent slide
Order number: 6SL3080-8AE00-0AA0
Drive system
1 CONTROL UNIT CU310 PN 6SL3040-1LA01-0AA0
1 COMPACTFLASH CARD WITH FIRMWARE OPTION PERFORMANCE EXTENSION, ACTUAL FIRMWARE RELEASE V4.06
6SL3054-0EG00-1BA0
1 SINAMICS LICENSE SAFETY INTEGRATED 6SL3074-0AA10-0AA0
1 BASIC OPERATOR PANEL (BOP20) 6SL3055-0AA00-4BA0
1 CONVERTER POWER MODULE PM340 WITHOUT NETFILTER 1,5 kW; 4,1A 6SL3210-1SE14-1UA0
1 EMC FILTER 380V-480V 3AC 6A FOOTPRINT FSA - CLASS A 6SE6400-2FA00-6AD0
1 AC COMMUNICATION CHOKE 200V-480V 3AC 4,8A BASE LAYER FASA -3,2 MH 6SE6400-3CC00-6AD3
1 SCREENING KIT FOR POWER MODULE FSA 6SL3262-1AA00-0BA0
Software
1 STARTER COMMISSIONING TOOL 6SL3072-0AA00-0AG0
1 DCC SINAMICS 6AU1810-1HA22-1XA0
1 SIZER CONFIGURING TOOL DVD 6SL3070-0AA00-0AG0
Overview / List / Graphic / Cabinet
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 116 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SINAMICS S120 Servo drive 3 AC 400V Network
A) Asynchronous-Motor with/without position measuring of actual position
Standard low voltage induction motor Type 1LA7
Rated output: 1,5 kW, rotational speed 1420 rpm 50Hz
Size: 90L with foot-mounting B3 degree of protection IP55
Add-on Z = A23 motor protection with KTY 84-130
Add-on Z = H57 speed actual value encoder 1XP8001-1 HTL with 1024 pulses per reverse
1LA7096-4AA60-Z
Z = A23+H75
SIGNAL CABLE :
Between Sensor-Module SMC30 and CU310PN, SINAMICS DRIVE-CLIQ CABLE IP20/IP20 LENGTH: 0.95 M
6SL3060-4AA10-0AA0
Sensor Module SMC30:
For incremental encoder: HTL, for other encoder
6SL3055-0AA00-5CA2
SIGNAL CABLE :
Between Sensor-Module SMC30 and rotation speed encoder, Motion Connect 700, Signal A/B/R with length 2 m
6SX7002-0AN00-1AC0
Position- or Moment control with relative distance measurement
impulse generator at the Motor (with positioning at the reference point)
Standard low voltage induction motor Type 1LA9
Rated output: 1,5 kW , rotational speed 1420 rpm 50Hz
Size: 71M with foot-mounting B3 degree of protection IP55
Add-on Z = A23 motor protection with KTY 84-130
1LA9096-4AA60-Z
Z = A23
Speed control – without actual speed encoder at the motor
When selecting please ask the local Siemens technical sales department
Overview / List / Graphic / Cabinet
Recomendation
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 117 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SINAMICS S120 Servo drive 3 AC 400V Network
B) With relative distance measurement (positioning at the reference point)
SIMOTICS S-1FK7
SYNCHRONOUS MOTOR 1FK7-CT
PN=0,82 KW; UZK=600V M0=3NM (100K); NN=3000RPM
NATURAL AIR COOLING, FRAME SIZE IMB 5 (IM V1, IM V3)
FLANGE 1 POWER CONNECTOR ROTATABLE
INCREMENTAL ENCODER 22 BIT WITH DRIVE-CLIQ
INTERFACE (ENCODER IC22DQ) PLAIN SHAFT, TOLERANCE N
W/O HOLDING BRAKE PROTECTION CLASS IP64
1FK7042-2AF71-1DG0
POWER CABLE
CUSTOMIZED 4X1.5 C, SIZE CONNECTOR 1, MOTION-CONNECT 500; LENGTH 2 M
6FX5002-5CG01-1AC0
SIGNAL CABLE
CUSTOMIZED; DRIVE CLIQ CONNECTOR, IP20/IP67, MOTION-CONNECT 500; LENGTH 2 M
6FX5002-2DC10-1AC0
When selecting please ask the local Siemens technical sales department
Overview / List / Graphic / Cabinet
Recomendation
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 118 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SINAMICS S120 Servo drive 3 AC 400V Network
C) With absolute distance measurement
(without positioning at the reference point)
SIMOTICS S-1FK7
SYNCHRONOUS MOTOR 1FK7-CT
PN=0,82 KW; UZK=600V M0=3NM (100K); NN=3000RPM;
NATURAL AIR COOLING, FRAME SIZE IMB 5 (IM V1, IM V3);
FLANGE; 1 POWER CONNECTOR ROTATABLE;
ABSOLUTE ENCODER 22 BIT + 12 BIT MULTITURN, WITH
DRIVE-CLIQ INTERFACE (ENCODER AM22DQ)
PLAIN SHAFT, TOLERANCE N; W/O HOLDING BRAKE
PROTECTION CLASS IP64
1FK7042-2AF71-1FG0
POWER CABLE
CUSTOMIZED 4X1.5 C, SIZE CONNECTOR 1, MOTION-CONNECT 500; LENGTH 2 M
6FX5002-5CG01-1AC0
SIGNAL CABLE
CUSTOMIZED; DRIVE CLIQ CONNECTOR, IP20/IP67, MOTION-CONNECT 500; LENGTH 2 M
6FX5002-2DC10-1AC0
When selecting please ask the local Siemens technical sales department
Overview / List / Graphic / Cabinet
Recomendation
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 119 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SINAMICS S120 Servo drive 3 AC 400V Network
Hardware optional
CIRCUIT-BREAKER S00
CIRCUIT-BREAKER SZ S00, FOR MOTOR PROTECTION, CLASS 10, A-RELEASE 5.5...8A 3RV2011-1HA10
POWER SUPPLY
SITOP MODULAR SV INPUT: AC 120/230 - 500V, OUTPUT : DC 24V / 5A 6EP1333-3BA00
POWER SUPPLY
LOGO!-POWER 24V; INPUT : AC 100-240 V, OUTPUT: DC 24V / 4 A 6EP1332-1SH52
CABLE
SIMATIC NET, INDUSTRIAL ETHERNET, TP XP CORD RJ45/RJ45, CAT 6, CROSSED ; LENGTH = 6m 6XV1870-3RH60
DOCUMENTATION
SINAMICS S120 ON CD 6SL3097-2CA00-0YG5
TERMINAL MODULE TM31 I/O-EXTENSION
FOR SINAMICS CONVERTORS WITH DIGITAL AND ANALOG IN- AND OUTPUTS; 12 DI, 2 DA, 2 AE, 2 AA 6SL3055-0AA00-3AA1
TERMINAL MODULE TM54F Safety I/O-EXTENSION :
FOR SINAMICS CONVERTORS WITH FAIL-SAFE IN- AND OUTPUTS 6SL3055-0AA00-3BA0
SIGNAL CABLE
SINAMICS DRIVE-CLIQ CABLE IP20/IP20 LENGTH: 0.95 M 6SL3060-4AA10-0AA0
When selecting please ask the local Siemens technical sales department
Recomendation
Overview / List / Graphic / Cabinet
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 120 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SINAMICS S120 Servo drive 3 AC 400V Network
Software optional
When selecting please ask the local Siemens technical sales department
STARTER 6SL3072-0AA00-0AG0
STARTER COMMISSIONING TOOL FOR SINAMICS AND MICROMASTER VERSION V4.3.2
SIZER 6SL3070-0AA00-0AG0
SIZER FOR SIEMENS DRIVES DRIVE DESIGN TOOL
DRIVE ES BASIC V5.5 SP2 6SW1700-5JA00-5AA0
ENGINEERING-SW FOR DRIVES, 5-LANGUAGE CD WITH ELECTR. DOCUMENTATION
FOR STEP 7 V5.4 FLOATING LICENSE
DRIVE ES SIMATIC V5.5 6SW1700-5JC00-5AA0
DRIVE ES SIMATIC V5.5 BLOCK LIBRARIES FOR SIMATIC S7
FOR COMMUNICATION WITH DRIVES 5-LANGUAGE CD; WITH ELECTR. DOCUMENTATION
Recomendation
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 121 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMOTION D410-2 add on for SINAMICS S120
1- and 3- phase
SIMOTION D410-2 is a single-axis system, which can be used in combination with SINAMICS S120 AC/AC Power
Module.
SIMOTION D410-2 is the entry level controller in the SIMOTION D family.
SIMOTION D410 is the ideal controller, if Motion Control for a single-axis and PLC functionality
is demanded in a small form factor.
PROFINET IO with IRT (with D410-2 PN/DP) enables various connectivity with HMI and distributed I/Os.
Overview / List / Graphic / Cabinet
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 122 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SIMOTION D410 add on for SINAMICS S120
1 SIMOTION DRIVE BASED CONTROL UNIT D410-2 DP/PN SINGLE-AXIS CONTROLLER WITH PROFINET
VARIANT 6AU1410-2AD00-0AA0
1 SIMOTION DRIVE-BASED 1 GB COMPACT FLASH CARD D410-2; SINAMICS DRIVE SOFTWARE V4.X AND
SIMOTION KERNEL FOR SIMOTION D410-2 6AU1400-1PA22-0AA0
1 SIMOTION ENGINEERING SYSTEM SCOUT STANDALONE V4.3 FULL LICENSE DVD INCL. STARTER,
RUNTIME, TECHN., DRIVES BASIC, DOCUMENTATION FREE OF CHARGE UTILITIES 6AU1810-1CA43-1XA0
1 SIMOTION ENGINEERING SYSTEM DCC SIMOTION V2.2 SP1 FULL LICENSE DCC FOR SIMOTION V4.1
SP1 AND FOR SINAMICS V2.5 OPTION FOR SCOUT V4.3 AND FOR STARTER V4.1 DELIVERY ON DATA
CARRIER DVD INCL. FLOATING LICENSE
6AU1810-1JA22-1XA0
1 SIMOTION IT COMPREHENSIVE IT FUNCTIONS WITH JAVA VIRTUAL MACHINE: RUNTIME
ENVIRONMENT FOR JAVA APPLICATIONS ON SIMOTION LICENSE (COL) INCLUDES FOLLOWING
LICENCES:
SIMOTION IT DIAG: 6AU1820-8BA20-0AB0
SIMOTION IT OPC XML-DA: 6AU1820-8BB20-0AB0
6AU1820-8BD20-0AB0
System requirements: 64 BIT: Windows 7 Professional, Ultimate SP1
32 BIT: Windows 7 Professional, Ultimate SP1, Windows XP Professional SP3
Sales note:
Technical note:
For vocational schools, colleges and universities, in-house vocational training departments, non-commercial research
institutions and non-commercial training departments!
Consider subsequent slide
Order number: 6SL3080-8LA00-0AA0
Overview / List / Graphic / Cabinet
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 123 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2,
PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M
6XV1870-3RH60
SIMOTION ENGINEERING SYSTEM SCOUT STAND ALONE SOFTWARE CARE SERVICE 6AU1810-0CA00-0XL0
SINAMICS TERMINAL MODULE CABINET TM31 WITHOUT DRIVE-CLIQ CABLE ADD ON BOARD
FOR SINAMICS CONVERTORS WITH DIGITAL AND ANALOG IN- AND OUTPUTS 6SL3055-0AA00-3AA1
SINAMICS DRIVE-CLIQ CABLE IP20/IP20 LENGTH: 0.95 M 6SL3060-4AA10-0AA0
SIMOTION D410 add on for SINAMICS S120
optional Software and Hardware
When selecting please ask the local Siemens technical sales department
Overview / List / Graphic / Cabinet
Recomendation
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 124 Industry Sector
CNC Software
• Overview
Overview / List / Graphic / Cabinet
• SinuTrain Operate 4.5 / 4.4 / 2.6
• SinuTrain Operate Students Package 4.5 / 4.4 / 2.6
Training curriculums siemens.com/sce/modules
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 125 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SinuTrain für SINUMERIK Operate V4.5
1 x SinuTrain full version class room license for 6 PCs
2 x SinuTrain Student package
6FC5870-1SC41-0YA0
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocation schools, Colleges and Universities, non commercial research institutions, non commercial training
departments and not for in-house vocational training departments!
Technical note: None available
Order number: 6FC5870-1TC41-0YA0
2x20 Student versions
each 300 hours
Training manuals
1x Easy milling with ShopMill
1x Easy milling with ShopTurn
1x First-Time User Instructions
SinuTrain FOR SINUMERIK OPERATE 4.5 IS APPLICABLE FOR
SINUMERIK 840D SL, SINUMERIK 828D/828D BASIC
WITH CNC-SOFTWARE 4.5 SP2
SinuTrain V4.5 for commercial training departments and for in-house vocational training departments!
http://support.automation.siemens.com/WW/view/en/77998546
Overview / List / Graphic / Cabinet
1x Class room-License
Student License
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 126 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SinuTrain für SINUMERIK Operate V4.5
SINUTRAIN FOR SINUMERIK OPERATE VERSION 4.5
20 STUDENT PACKAGE JE 300 STUNDEN LAUFZEIT
SinuTrain FOR SINUMERIK OPERATE 4.5 IS APPLICABLE FOR
SINUMERIK 840D SL, SINUMERIK 828D/828D BASIC
with CNC-SOFTWARE 4.5 SP2
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocation schools, Colleges and Universities, non commercial research institutions, non commercial training
departments and not for in-house vocational training departments!
Technical note: None available
Order number: 6FC5870-1SC41-0YA0
20x Students versions
SinuTrain V4.5 for commercial training departments and for in-house vocational training departments!
http://support.automation.siemens.com/WW/view/en/77998546
Overview / List / Graphic / Cabinet
Student License
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 127 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SinuTrain for SINUMERIK Operate V4.4 ED2
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocation schools, Colleges and Universities, non commercial research institutions, non commercial training
departments and not for in-house vocational training departments!
Technical note: None available
Order number: 6FC5870-1TC40-1YA0
1 x SinuTrain full version class room license for 16 PCs
6FC5870-8YC40-1YA0
1 x SinuTrain Student package
6FC5870-1SC40-1YA0
Overview / List / Graphic / Cabinet
SinuTrain FOR SINUMERIK OPERATE 4.4 IS APPLICABLE FOR
• SINUMERIK 840D SL WITH SW V2.7 SP2 AND V4.4 SP2
• SINUMERIK 828D/828D BASIC WITH SW V2.7 SP2 AND V4.4 SP2
Training manuals
1x Easy milling with ShopMill
1x Easy milling with ShopTurn
1x First-Time User Instructions
SinuTrain V4.4 for commercial training departments and for in-house vocational training departments!
http://support.automation.siemens.com/WW/view/en/63258110
32x Students versions
each 300 hours 1x Class room-License
Student License
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 128 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SinuTrain for SINUMERIK Operate V4.4 ED2
SINUMERIK 828D/828D BASIC WITH SW 2.7 SP2 AND 4.4S P2
SINUMERIK 840D SL WITH CNC SW 2.7 SP2 AND 4.4 SP2
EDUCATION-SW ON DVD
SINUTRAIN FOR SINUMERIK OPERATE
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
Sales note: For vocation schools, Colleges and Universities, non commercial research institutions, non commercial training
departments and not for in-house vocational training departments!
Technical note: None available
Order number: 6FC5870-1SC40-1YA0
Overview / List / Graphic / Cabinet
SinuTrain V4.4 for commercial training departments and for in-house vocational training departments!
http://support.automation.siemens.com/WW/view/en/63258110
SinuTrain FOR SINUMERIK OPERATE 4.4 IS APPLICABLE FOR
• SINUMERIK 840D SL WITH SW V2.7 SP2 AND V4.4 SP2
• SINUMERIK 828D/828D BASIC WITH SW V2.7 SP2 AND V4.4 SP2
32x Students versions
each 300 hours
Student License
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 129 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SinuTrain for SINUMERIK Operate V2.6 SP1 HF 1
System requirements: 32 BIT: WINDOWS XP PROFESSIONAL SP3
Sales note: For vocational schools, colleges and universities, non-commercial research institutions, non-commercial training
departments, but not for in-house vocational training departments!
Technical note: None available
Order number: 6FC5870-1TC20-1YA0
32x Students versions
each 300 hours
Software SinuTrain
1x SinuTrain FULL VERSION CLASS ROOM LICENSE FOR 16 PCS
6FC5870-8YC20-1YA0
1x SinuTrain STUDENT PACKAGE
6FC5870-1SC20-1YA0
Overview / List / Graphic / Cabinet
1x Class room-License
Training manuals
1x Easy milling with ShopMill
1x Easy milling with ShopTurn
1x First-Time User Instructions
SinuTrain FOR SINUMERIK OPERATE IS APPLICABLE FOR
• SINUMERIK 840D sl FROM CNC-SW V2.6 SP1
• SINUMERIK 828D FROM CNC-SW V4.3
Student License
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 130 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
SinuTrain for SINUMERIK Operate V2.6 SP1 HF1
System requirements: 32 BIT: WINDOWS XP Professional SP3
Sales note: For vocation schools, Colleges and Universities, non commercial research institutions, non commercial training
departments and not for in-house vocational training departments!
Technical note: None available
Order number: 6FC5870-1SC20-1YA0
CONSISTING OF 32 SinuTrain PACKAGES WITH
CDS WITH 300-HOURS LICENSE PER PACKAGE
SinuTrain STUDENT PACKAGE
TRAINING SOFTWARE ON DVD, SinuTrain FOR
SINUMERIK OPERATE COMPLETE PACKAGE SM/ST
SOFTWARE V2.6 SP1 HF1 CONTROL-IDENTICAL CNC
SinuTrain FOR SINUMERIK OPERATE IS APPLICABLE FOR
• SINUMERIK 828D AB CNC-SW V4.3,
• SINUMERIK 840D SL AB CNC-SW 2.6 SP1
Overview / List / Graphic / Cabinet
SinuTrain FOR SINUMERIK OPERATE 4.4 IS APPLICABLE FOR
• SINUMERIK 840D sl FROM CNC-SW V2.6 SP1
• SINUMERIK 828D FROM CNC-SW V4.3
32x Students versions
each 300 hours
Student License
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 131 Industry Sector
Additional
• Overview
• Industrial Controls
Overview / List / Graphic / Cabinet
Training curriculums siemens.com/sce/modules
• Trainer Packages Purchasing Remarks
• Trainer Packages General Regulations
• Product Lifecycle Management (PLM)
• WorldSkills
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 132 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
Additional
Abstract of the comprehensive accessories Industrial Controls
Overview / List / Graphic / Cabinet
Contactors and Contactor Assemblies https://eb.automation.siemens.com/mall/en/WW/Catalog/Products/8210239?tree=catalogtree
Commanding and Signaling Devices https://eb.automation.siemens.com/mall/en/WW/Catalog/Products/8229999?tree=catalogtree
Terminal Blocks http://w3.siemens.com/powerdistribution/global/EN/lv/product-portfolio/alpha/terminal-blocks/Pages/terminal-blocks.aspx
https://eb.automation.siemens.com/mall/en/de/Catalog/Products/10046635?tree=CatalogTree
Protection Equipment https://eb.automation.siemens.com/mall/en/WW/Catalog/Products/10007268?tree=catalogtree
Safety Systems https://eb.automation.siemens.com/mall/en/WW/Catalog/Products/10121593?tree=catalogtree
SENTRON Protection, Switching, Measuring and Monitoring Devices https://eb.automation.siemens.com/mall/en/de/Catalog/Products/10005570?tree=CatalogTree
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 133 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
Additional
Siemens Industry Software Product Lifecycle Management (PLM)
Overview / List / Graphic / Cabinet
NX, with new tools and technologies, the latest release of NX delivers productivity throughout
product development. See how NX can help you accelerate your design, engineering, and
manufacturing processes. www.siemens.com/nx
Tecnomatix, is a comprehensive portfolio of digital manufacturing solutions that deliver
innovation by linking all manufacturing disciplines together with product engineering – from
process layout and design, process simulation and validation, to manufacturing execution. www.siemens.com/Tecnomatix
Teamcenter, helps you deliver increasingly complex products to market while maximizing
productivity and streamlining global operations. www.siemens.com/Teamcenter
Velocity Series, Powerful and easy-to-use software tools for product development. Solid Edge,
Femap, CAM Express and 3D Sync. www.siemens.com/solidedge
Contact Partner:
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 134 Industry Sector
Additional
Our Commitment together with WorldSkills International
• WSI promotes the quality of vocational training for more than 60 years
• WSI organizes biannually a WorldSkills competition (WSC) with national
preliminaries
• With > 50 participating countries, > 1000 Competitors >200,000 visitors
• London2011, Leipzig2013, São Paulo2015, Abu Dhabi 2017, …
For example in the discipline Industrial Control (Skill 19) the best young
skilled workers from over 20 countries compete with Products from
the Siemens Industry Sector.
Videos: youtu.be/jTnzGm51V_A youtu.be/JokhkRgFMPg
Blog: WorldSkillsLeipzig2013
WorldSkills International (WSI)
Siemens SCE = Global Industry Partner (GIP) and Product Sponsor
SCE promotes excellence in vocational training together with WSI
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 135 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
Additional
Purchasing Remarks of SCE Trainer Packages
For the purchasing of SCE Trainer Packages, a special supplementary license agreement is required.
The General License Conditions for Software Products for Industry Automation and Drive Technologies apply for software
products. For trainer packages, the “Supplementary License Agreement for SIMATIC Software for Class-Room
use at research-, development- and education institutions„ has to be signed and send for release of the delivery to
I IA AS S EUR SCE. You will find these at: http://intranet.siemens.com/sce
Release for delivery
Trainer packages are released trough Siemens AG department I IA AS S EUR SCE
Contact Partner: Christian Callegari Fax: +49 (0)911-895-158021 und [email protected]
Exception
The following Trainer packages are not intended for vocational in-house training Departments.
SIMATIC STEP 7 Trainer Package V12 SP1 (12 * Package) 6ES7822-1BA02-4YA5
Upgrade SIMATIC STEP 7 Trainer Package V12 SP1 (12 * Upgrade Package) 6ES7822-1AA02-4YE5
SIMATIC S7 Software for students 6ES7822-1AC02-4YA5
SinuTrain Operate 6FC5870-1T…
SinuTrain Operate for students 6FC5870-1S…
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
Student License
Student License
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 136 Industry Sector
► Additional
► CNC Software
► Drive Technologies
► Sensor
Technologies
► Industrial
Communication
► PLCs and
Peripheries
► Process Automation
► Operator control &
monitoring
► Micro Automation
► Quick start into
automation
► Engineering
Software
► Energy Efficiency
Additional
General Regulations for SCE Trainer Packages
General Regulations
• Prices, if listed, valid as of release 11/2013. The prices are in Euros ex works excluding packaging.
• The sales tax (VAT) is not included in the prices. This is calculated separately according to the legal regulations
for each valid set.
• We reserve the right to change the price and will charge the price valid at shipping.
• You will always find current prices upon request from your Siemens point of contact.
• The listed products could be subject to European/German and/or US-Export regulations.
• The General License Conditions for Software Products for Industry Automation and Drive Technologies apply for
software products.
• The information provided in this SCE Guide Trainer Packages only contains general descriptions which may change as
a result of further development of the products. An obligation to provide the respective characteristics shall only exist if
expressly agreed in the terms of contract.
Additional Information
• Benefits of SCE www.siemens.com/sce
• More Information about the Trainer Packages www.siemens.com/sce/tp
• Training curriculums: www.siemens.com/sce/modules
• Complete didactic solutions from Partners: www.siemens.com/sce/partner
Overview / List / Graphic / Cabinet
TIA Portal siemens.com/tia-portal/details
Unrestricted / © Siemens AG 2013. All Rights Reserved.
Version 11/2013 Page 137 Industry Sector
Christian Callegari
I IA AS S EUR SCE
E-Mail: [email protected]
Thank you for your attention!
siemens.com/sce