SCCM Deployment - support.upslide.net · UpSlide | SCCM Deployment 2 UpSlide SAS - R.C.S. Paris 791...
Transcript of SCCM Deployment - support.upslide.net · UpSlide | SCCM Deployment 2 UpSlide SAS - R.C.S. Paris 791...
January 2017
UpSlide
SCCM
DEPLOYMENT
Step by step guide
UpSlide | SCCM Deployment
UpSlide SAS - R.C.S. Paris 791 925 753 300018 - 20, avenue de l’Opéra - 75001 Paris - France +33 1 83 64 18 40
UpSlide UK Ltd - 9182131 - Level 39 - One Canada Square - Canary Wharf - London E14 5AB - UK +44 203 725 7589
UpSlide Inc. - 1460 Broadway, New York - NY 10036 - USA +1 929 238 4346
www.upslide.net
2 | 23
Table of contents
1 Introduction ............................................................................................................................................................................... 3
2 Prerequisites Packaging ......................................................................................................................................................... 3
2.1 .NET Framework Packaging ......................................................................................................................................... 3
2.2 Visual Studio Tools for Office Runtime (VSTO) ..................................................................................................... 9
3 UpSlide Packaging ..................................................................................................................................................................17
UpSlide | SCCM Deployment
UpSlide SAS - R.C.S. Paris 791 925 753 300018 - 20, avenue de l’Opéra - 75001 Paris - France +33 1 83 64 18 40
UpSlide UK Ltd - 9182131 - Level 39 - One Canada Square - Canary Wharf - London E14 5AB - UK +44 203 725 7589
UpSlide Inc. - 1460 Broadway, New York - NY 10036 - USA +1 929 238 4346
www.upslide.net
3 | 23
1 Introduction
UpSlide is fully compatible with SCCM Deployment. The following pages describe, in details, how UpSlide
should be deployed via SCCM.
2 Prerequisites Packaging
UpSlide will only function if these two Prerequisites are found on the machine:
.NET Framework 4.5.2: https://www.microsoft.com/en-us/download/details.aspx?id=42642
Visual Studio Tools for Office Runtime 2010: https://www.microsoft.com/en-
us/download/details.aspx?id=48217
2.1 .NET Framework Packaging
For UpSlide to function, .NET Framework needs to be installed. This section describes How to create the
package on System Center Configuration Manager.
The first step is to download the offline package of .NET Framework from this link:
https://www.microsoft.com/en-us/download/details.aspx?id=42642
Once downloaded, open the Configuration Manager Console:
Fig. 1: Configuration Manager Console
UpSlide | SCCM Deployment
UpSlide SAS - R.C.S. Paris 791 925 753 300018 - 20, avenue de l’Opéra - 75001 Paris - France +33 1 83 64 18 40
UpSlide UK Ltd - 9182131 - Level 39 - One Canada Square - Canary Wharf - London E14 5AB - UK +44 203 725 7589
UpSlide Inc. - 1460 Broadway, New York - NY 10036 - USA +1 929 238 4346
www.upslide.net
4 | 23
Next, go to Applications and select Create Application.
Fig. 2: Create a New Application
On the General page of the Create Application Wizard, select Manually specify the application
information, then click on Next.
Fig. 3: General Page
Specify general information about the Application such as Name, and Version.
Fig. 4: General Information
On the Application Catalog page, enter Application details such as name and language and click on Next:
UpSlide | SCCM Deployment
UpSlide SAS - R.C.S. Paris 791 925 753 300018 - 20, avenue de l’Opéra - 75001 Paris - France +33 1 83 64 18 40
UpSlide UK Ltd - 9182131 - Level 39 - One Canada Square - Canary Wharf - London E14 5AB - UK +44 203 725 7589
UpSlide Inc. - 1460 Broadway, New York - NY 10036 - USA +1 929 238 4346
www.upslide.net
5 | 23
Fig. 5: Application Catalog
On the Deployment Types page of the Create Application Wizard, click on Add to create a new
deployment type.
Fig. 6: Add a new Deployment Type
The Create Deployment Type Wizard will open.
UpSlide | SCCM Deployment
UpSlide SAS - R.C.S. Paris 791 925 753 300018 - 20, avenue de l’Opéra - 75001 Paris - France +33 1 83 64 18 40
UpSlide UK Ltd - 9182131 - Level 39 - One Canada Square - Canary Wharf - London E14 5AB - UK +44 203 725 7589
UpSlide Inc. - 1460 Broadway, New York - NY 10036 - USA +1 929 238 4346
www.upslide.net
6 | 23
On the General page of the Create Deployment Type Wizard, select Manually configure the deployment
type information.
Fig. 7: Create Deployment Type Wizard
On the General Information page, enter deployment details such as the Name and comments, and click on
Next.
Fig. 8: General Information
UpSlide | SCCM Deployment
UpSlide SAS - R.C.S. Paris 791 925 753 300018 - 20, avenue de l’Opéra - 75001 Paris - France +33 1 83 64 18 40
UpSlide UK Ltd - 9182131 - Level 39 - One Canada Square - Canary Wharf - London E14 5AB - UK +44 203 725 7589
UpSlide Inc. - 1460 Broadway, New York - NY 10036 - USA +1 929 238 4346
www.upslide.net
7 | 23
On the Content Page, fill these two fields:
Content Location: Path to .NET Framework Install File (1)
Installation Program: {.NET Install Filename}.exe /q /norestart (2)
Fig. 9: Content Page
Next, configure the detection methods to indicate the presence of the application with these settings:
Setting type: Registry,
Hive: HKEY_LOCAL_MACHINE,
Key: SOFTWARE\Microsoft\NET Framework Setup\NDP\v4\Full,
Value: Release,
Data Type: Integer,
Select “This Registry Settings Must Exist on the Target System to indicate presence of this Application”.
UpSlide | SCCM Deployment
UpSlide SAS - R.C.S. Paris 791 925 753 300018 - 20, avenue de l’Opéra - 75001 Paris - France +33 1 83 64 18 40
UpSlide UK Ltd - 9182131 - Level 39 - One Canada Square - Canary Wharf - London E14 5AB - UK +44 203 725 7589
UpSlide Inc. - 1460 Broadway, New York - NY 10036 - USA +1 929 238 4346
www.upslide.net
8 | 23
Fig. 10: Detection Methods Parameters
Validate the Detection Rule, on the User Experience screen specify these settings:
Installation Behavior: Install for System,
Logon Requirement: Only when a user is logged on,
Installation program visibility: Normal.
Fig. 11: User Experience
Click on Next and leave Requirements and Dependencies pages with default settings. Close the
Deployment Type Creation wizard.
UpSlide | SCCM Deployment
UpSlide SAS - R.C.S. Paris 791 925 753 300018 - 20, avenue de l’Opéra - 75001 Paris - France +33 1 83 64 18 40
UpSlide UK Ltd - 9182131 - Level 39 - One Canada Square - Canary Wharf - London E14 5AB - UK +44 203 725 7589
UpSlide Inc. - 1460 Broadway, New York - NY 10036 - USA +1 929 238 4346
www.upslide.net
9 | 23
Fig. 12: Deployment Type Successfully Created
On Application Creation Wizard under Deployment Types page select the newly created deployment
type and click on Next.
Fig. 13: Deployment Types
Close the Application Creation Wizard. You can now push your Application to the Distribution Point.
2.2 Visual Studio Tools for Office Runtime (VSTO)
For UpSlide to function, Visual Studio Tools for Office Runtime needs to be installed. Please follow these
steps to create the package on System Center Configuration Manager.
The first step is to download the offline package of VSTO from this link: https://www.microsoft.com/en-
us/download/details.aspx?id=48217
Once downloaded, open the Configuration Manager Console:
Fig. 14: Configuration Manager
UpSlide | SCCM Deployment
UpSlide SAS - R.C.S. Paris 791 925 753 300018 - 20, avenue de l’Opéra - 75001 Paris - France +33 1 83 64 18 40
UpSlide UK Ltd - 9182131 - Level 39 - One Canada Square - Canary Wharf - London E14 5AB - UK +44 203 725 7589
UpSlide Inc. - 1460 Broadway, New York - NY 10036 - USA +1 929 238 4346
www.upslide.net
10 | 23
Next, go to Applications and select “Create Application”.
Fig. 15: Create Application
On the General page of the Create Application Wizard, select Manually specify the application
information, and click on Next.
Fig. 16: General Page
UpSlide | SCCM Deployment
UpSlide SAS - R.C.S. Paris 791 925 753 300018 - 20, avenue de l’Opéra - 75001 Paris - France +33 1 83 64 18 40
UpSlide UK Ltd - 9182131 - Level 39 - One Canada Square - Canary Wharf - London E14 5AB - UK +44 203 725 7589
UpSlide Inc. - 1460 Broadway, New York - NY 10036 - USA +1 929 238 4346
www.upslide.net
11 | 23
Specify general information about the Application such as Name, and Version and click on Next.
Fig. 17: Application Information
On the Application Catalog page, enter applications details such as name and language and click on Next.
Fig. 18: Application Catalog
UpSlide | SCCM Deployment
UpSlide SAS - R.C.S. Paris 791 925 753 300018 - 20, avenue de l’Opéra - 75001 Paris - France +33 1 83 64 18 40
UpSlide UK Ltd - 9182131 - Level 39 - One Canada Square - Canary Wharf - London E14 5AB - UK +44 203 725 7589
UpSlide Inc. - 1460 Broadway, New York - NY 10036 - USA +1 929 238 4346
www.upslide.net
12 | 23
On the Deployment Types page of the Create Application Wizard, click Add to create a new deployment
type:
Fig. 19: Add a New Deployment Type
The Create Deployment Type Wizard will open, on the General page of the Create Deployment Type
Wizard, select Manually configure the deployment type information:
Fig. 20: Create Deployment Type Wizard
UpSlide | SCCM Deployment
UpSlide SAS - R.C.S. Paris 791 925 753 300018 - 20, avenue de l’Opéra - 75001 Paris - France +33 1 83 64 18 40
UpSlide UK Ltd - 9182131 - Level 39 - One Canada Square - Canary Wharf - London E14 5AB - UK +44 203 725 7589
UpSlide Inc. - 1460 Broadway, New York - NY 10036 - USA +1 929 238 4346
www.upslide.net
13 | 23
On the General Information page, enter Deployment details such as the Name and comments, and click
on Next:
Fig. 21 General Information
On the Content Page, fill these two fields:
Content Location: Path to VSTO Install File (1),
Installation Program: {VSTO Install Filename}.exe /q /norestart (2).
Fig. 22: Content Page
UpSlide | SCCM Deployment
UpSlide SAS - R.C.S. Paris 791 925 753 300018 - 20, avenue de l’Opéra - 75001 Paris - France +33 1 83 64 18 40
UpSlide UK Ltd - 9182131 - Level 39 - One Canada Square - Canary Wharf - London E14 5AB - UK +44 203 725 7589
UpSlide Inc. - 1460 Broadway, New York - NY 10036 - USA +1 929 238 4346
www.upslide.net
14 | 23
On the next Screen the Detection method needs to be defined, select Add a Clause and fill with these
settings:
For x64 Systems:
Settings Type: Registry,
Hive: HKEY_LOCAL_MACHINE,
Key: SOFTWARE\WOW6432Node\Microsoft\VSTO Runtime Setup\v4
Value: Version,
Data Type: String,
Select “This Registry Settings Must Satisfy the following rule to indicate the presence of the application”.
Operator: Equals
Value: Version of VSTO downloaded (on our case 10.0.60301)
For x86 Systems:
Settings Type: Registry,
Hive: HKEY_LOCAL_MACHINE,
Key: SOFTWARE\Microsoft\VSTO Runtime Setup\v4,
Value: Version,
Data Type: String,
Select “This Registry Settings Must Satisfy the following rule to indicate the presence of the application”.
Operator: Equals
Value: Version of VSTO downloaded (on our case 10.0.60301)
Fig. 23 VSTO Detection Clauses
UpSlide | SCCM Deployment
UpSlide SAS - R.C.S. Paris 791 925 753 300018 - 20, avenue de l’Opéra - 75001 Paris - France +33 1 83 64 18 40
UpSlide UK Ltd - 9182131 - Level 39 - One Canada Square - Canary Wharf - London E14 5AB - UK +44 203 725 7589
UpSlide Inc. - 1460 Broadway, New York - NY 10036 - USA +1 929 238 4346
www.upslide.net
15 | 23
You can keep the two clauses to ensure compatibility with x64 and x86 Clients, the condition between the
two clauses needs to be changed first from AND to OR.
Fig. 24: Detection Clauses Conditions
Validate the Detection Rule, on the User Experience screen specify these settings:
Installation Behavior: Install for System,
Logon Requirement: Only when a user is logged on,
Installation program visibility: Normal.
Fig. 25: User Experience
UpSlide | SCCM Deployment
UpSlide SAS - R.C.S. Paris 791 925 753 300018 - 20, avenue de l’Opéra - 75001 Paris - France +33 1 83 64 18 40
UpSlide UK Ltd - 9182131 - Level 39 - One Canada Square - Canary Wharf - London E14 5AB - UK +44 203 725 7589
UpSlide Inc. - 1460 Broadway, New York - NY 10036 - USA +1 929 238 4346
www.upslide.net
16 | 23
Click on Next and close the Deployment Type Creation Wizard.
Fig. 26: Deployment Type successfully created
On Application Creation Wizard under Deployment Types page select the newly created deployment
type and click on Next.
Fig. 27: Select Deployment Type
Close the Application Creation Wizard. You can now push your Application to the Distribution Point.
UpSlide | SCCM Deployment
UpSlide SAS - R.C.S. Paris 791 925 753 300018 - 20, avenue de l’Opéra - 75001 Paris - France +33 1 83 64 18 40
UpSlide UK Ltd - 9182131 - Level 39 - One Canada Square - Canary Wharf - London E14 5AB - UK +44 203 725 7589
UpSlide Inc. - 1460 Broadway, New York - NY 10036 - USA +1 929 238 4346
www.upslide.net
17 | 23
3 UpSlide Packaging
The last part consists in creating UpSlide Application in SCCM and make Prerequisites install with UpSlide if
they are not detected on the computer.
Open the Configuration Manager Console.
Fig. 28: Configuration Manager Console
Next, go to Applications and select Create Application.
Fig. 29: Create Application
UpSlide | SCCM Deployment
UpSlide SAS - R.C.S. Paris 791 925 753 300018 - 20, avenue de l’Opéra - 75001 Paris - France +33 1 83 64 18 40
UpSlide UK Ltd - 9182131 - Level 39 - One Canada Square - Canary Wharf - London E14 5AB - UK +44 203 725 7589
UpSlide Inc. - 1460 Broadway, New York - NY 10036 - USA +1 929 238 4346
www.upslide.net
18 | 23
On the General page of the Create Application Wizard, select Automatically detect information about
this application from installation files:
Type: Windows Installer (*.msi file),
Location: Path to UpSlide MSI Installer.
Fig. 30: Create Application Wizard
Click on Next, default parameters should be loaded automatically.
Fig. 31: Automatic Detection from MSI File
UpSlide | SCCM Deployment
UpSlide SAS - R.C.S. Paris 791 925 753 300018 - 20, avenue de l’Opéra - 75001 Paris - France +33 1 83 64 18 40
UpSlide UK Ltd - 9182131 - Level 39 - One Canada Square - Canary Wharf - London E14 5AB - UK +44 203 725 7589
UpSlide Inc. - 1460 Broadway, New York - NY 10036 - USA +1 929 238 4346
www.upslide.net
19 | 23
On the General Information page, the next step consists in configuring UpSlide installer to run silently.
Fill the Setup Software field, by default fill with: msiexec /i "UpSlide.msi" /q EXEOPTIONS="-q2".
You can adjust with the UpSlide Installer Switches:
-q2 to force install to be silent.
"LANG=en-US" to force the UpSlide User Interface to be in English. You can of course change
the UI language and replace en-US by any supported language UID.
o Supported languages are: en-US, fr-FR.
TsuRunMode=2 to force uninstall.
/a1 to force single user install.
/a4 to force all user install (setup will request an administrator password to proceed if current
user does not have sufficient permissions).
"KeepExistingConfig=1" to force UpSlide to install on top of any existing version. In that case,
the configuration folder is not modified by a new installation. Useful when the customization
should not be impacted by deployment.
"DeployReactivationService=1" to deploy the reactivation service.
Example for Silent Install and Reactivation Service:
msiexec /i "UpSlide.msi" /q EXEOPTIONS =”-q2 DeployReactivationService=1”.
Fig. 32: Installer Switches
UpSlide | SCCM Deployment
UpSlide SAS - R.C.S. Paris 791 925 753 300018 - 20, avenue de l’Opéra - 75001 Paris - France +33 1 83 64 18 40
UpSlide UK Ltd - 9182131 - Level 39 - One Canada Square - Canary Wharf - London E14 5AB - UK +44 203 725 7589
UpSlide Inc. - 1460 Broadway, New York - NY 10036 - USA +1 929 238 4346
www.upslide.net
20 | 23
To have the Application marked as Successfully installed by SCCM, the detection method needs to be
changed first.
Go back to Configuration Manager Console -> Applications -> UpSlide and go to Deployment Types.
Fig. 33: Deployment Types
Edit the properties of the Deployment type associated with UpSlide Application.
• Right Click on Deployment Type -> Properties -> Detection Methods.
Fig. 34: Change Detection Method
Remove the Default Detection Method which is based on the MSI Product code. And Add a new clause:
Setting Type: File System,
Type: File,
Path: C:\ProgramData\UpSlideBinaries,
File name: Finance3point1.UpSlide.Engine.dll,
Select This file setting must exist on the target system to indicate presence of this application
UpSlide | SCCM Deployment
UpSlide SAS - R.C.S. Paris 791 925 753 300018 - 20, avenue de l’Opéra - 75001 Paris - France +33 1 83 64 18 40
UpSlide UK Ltd - 9182131 - Level 39 - One Canada Square - Canary Wharf - London E14 5AB - UK +44 203 725 7589
UpSlide Inc. - 1460 Broadway, New York - NY 10036 - USA +1 929 238 4346
www.upslide.net
21 | 23
Fig. 35: New Detection Method Settings
Next step is to tell SCCM to install UpSlide for All Users on the computer.
Go to User Experience, and on Installation Behavior select Install for System.
Fig. 36: User Experience Settings
UpSlide | SCCM Deployment
UpSlide SAS - R.C.S. Paris 791 925 753 300018 - 20, avenue de l’Opéra - 75001 Paris - France +33 1 83 64 18 40
UpSlide UK Ltd - 9182131 - Level 39 - One Canada Square - Canary Wharf - London E14 5AB - UK +44 203 725 7589
UpSlide Inc. - 1460 Broadway, New York - NY 10036 - USA +1 929 238 4346
www.upslide.net
22 | 23
The last step of this guide is to add the dependencies to VSTO and .NET Runtime packages configured
earlier in this guide.
On Dependencies Tab Add two dependencies to .NET Runtime Applications and VSTO Application.
Fig. 37: Dependencies Configuration
Click on OK. The UpSlide package is now successfully configured and ready to be pushed to users.
PARIS
20, Avenue de l’Opéra,
75001 Paris
LONDON
Level 39, One Canada Square,
Canary Wharf,
London, E14 5AB
NEW YORK
1460 Broadway, New York,
NY 10036