ScanNCut and DesignNCut Accessories · NO. 3 HOME DECO PATTERN COLLECTION (CAUSB3) All designs are...
Transcript of ScanNCut and DesignNCut Accessories · NO. 3 HOME DECO PATTERN COLLECTION (CAUSB3) All designs are...
Note: For detailed instructions on the use, installation and care of these products please refer to your machine’s user manual.
ScanNCut and DesignNCut Accessories
NO. 1 QUILT PATTERN COLLECTION (CAUSB1)
All designs are created by Japanese quilter, Suzuko Koseki.
SCANNCUT CANVAS PREMIUM PACK 1 & 2 (CACVPPAC1/CACVPPAC2)
Premium Pack 1 contains: 125 patterns plus access to Enhanced Image Tracing.
Premium Pack 2 contains: 25 patterns plus activate Enhanced Image Tracing. For use with the Brother ScanNCut or DesignNCut machine.
NO. 3 HOME DECO PATTERN COLLECTION (CAUSB3)
All designs are created by Japanese designer, Pigpong, Yoko Ganaha.
NO. 2 APPLIQUÉ PATTERN COLLECTION (CAUSB2)
All designs are created by Japanese quilter, Akiko Endo.
NO. 4 3D PAPER CRAFT PATTERN COLLECTION (CAUSB4)
All designs are created by Japanese designer, Pigpong, Yoko Ganaha.
The World’s First Home and Hobby Cutting Machine with a Built-in Scanner
Brother’s most affordable electronic cutting machine
Patterns and Premium Packs
The only home and hobby cutting machine that allows you to take an image, photo or hand drawn sketch, scan it and precisely cut the shapes or outlines you want - you can even have the machine draw the scanned images for you.
See the ScanNCut in action at youtube.com/BrotherAu
See the DesignNCut in action at youtube.com/BrotherAu
From the makers of the award-winning ScanNCut, meet DesignNCut, the newest member of Brother’s electronic cutter range. Loaded with cutting-edge technology, this ultimate craft machine handles paper, fabric, felt, foam, plastic, vinyl and poster board like a pro.
WIFI READY
Meet
Note: All USB Pattern Collections are for use with the Brother ScanNCut machine. Included designs are for personal use only and may not be used for resale.
NEW!
Note: For detailed instructions on the use, installation and care of these products please refer to your machine’s user manual.
LOW TACK ADHESIVE MAT 12" X 12" (CAMATLOW)
LOW TACK ADHESIVE MAT 12” X 24” (CAMATLOW24)
Specially designed for delicate or thin paper
(like printer paper or vellum), cutting up to
305mm x 305mm or 305mm x 610mm.
For use with the Brother ScanNCut or
DesignNCut machine.
STANDARD MAT 12" X 12" (CAMATSTD12)
STANDARD MAT 12” X 24” (CAMATSTD24 )
Specially designed for a wide range of
materials, from fabrics to cardstock, cutting
up to 305mm x 305mm or 305mm x 610mm.
For use with the Brother ScanNCut or
DesignNCut machine.
SCANNING MAT 12” X 12” (CAMATS12)
SCANNING MAT 12” X 24” (CAMATS24 )
Specially designed for scanning photos, precious
documents and hand drawn designs, scanning
up to 305mm x 305mm (12” x 12”) or 305mm x
610mm (12” x 24”). Do not use for cutting. For
use with Brother ScanNCut machine.
Mats
Blades and Tools
DEEP CUT BLADE HOLDER (CAHLF1)
For use with the Brother
ScanNCut or DesignNCut
machine (Deep Cut Blade not
included).
STANDARD CUT BLADE HOLDER (CAHLP1)
For use with the Brother
ScanNCut or DesignNCut
machine (Standard Cut Blade
not included).
DEEP CUT BLADE (CABLDF1)
Let the Deep Cut Blade do the
hard work for you! This specially
designed blade was made
to cut thick materials like felt,
denim and even leather. For use
with the Brother ScanNCut or
DesignNCut machine (Deep Cut
Blade Holder not included).
STANDARD CUT BLADE (CABLDP1)
The Standard Cut Blade can
be used to cut a wide range of
both fabric and paper! For use
with the Brother ScanNCut or
DesignNCut machine (Standard
Cut Blade Holder not included).
NEW! NEW!
COLOUR PEN SET (CAPEN1)
This set includes six craft
colour pens with permanent
ink, for drawing and tracing
on paper. Pens are not
permanent on fabric. For use
with the Brother ScanNCut
or DesignNCut machine (Pen
Holder not included). Always
keep cap on when not in use.
PEN HOLDER (CAPENHL1)
For use with the Brother
ScanNCut or DesignNCut
machine (Pens not included).
Blades and Tools
PRECISION TWEEZERS (CATWZ)
Reverse action tweezers that
open when squeezed and
close when released. Comfort
grip, durable stainless steel,
and precision tip. Ideal for
holding and positioning small
cut-outs.
SPATULA AND HOOK SET (CASPHK1 )
The Spatula will help precisely lift cut designs from the cutting mat with ease, given its thin, sleek metal shape. The angled shape of the spatula will help to minimise tearing and curling of the cut material. The Precision Hook Tool (weeder) is perfect for removing tiny cuts from paper, fabric, and other various materials. The hook (weeder) is also great for punching out negative pieces of vinyl and iron-on transfer material from the carrier sheet. Both tools can be used many times. (Note: tip of metal hook is sharp.)
SCRAPER (CASCP)
Use this versatile tool to easily
remove the cut-out from your
cutting mat or to apply cut
designs to smooth surfaces
and firmly secure them. A great
complement to the Spatula and
Hook set.
BRAYER (CABRY)
This brayer with a soft rubber
roller is perfect for securing
material firmly and evenly to
the cutting mat. It is also useful
to burnish materials such as
adhesive craft vinyl onto smooth
surfaces.
ERASABLE PEN SET (CAPEN2)
Perfect for drawing seam
allowances or temporary
markings on your fabric! Ink in
the blue pen can be erased by
water and ink in the purple pen
is designed to disappear within
2-14 days of application. For
use with the Brother ScanNCut
or DesignNCut machine. (Pen
Holder not included).
UNIVERSAL PEN HOLDER (CAUNIPHL1 )
The Universal Pen Holder allows
for more creative freedom when
drawing with the ScanNCut and
DesignNCut machine. Many pens
and writing instruments that you
already have will fit perfectly into
this new pen holder. Use with
pens with a minimum length
of 70mm and with a diameter
between 9.6mm and 11.4mm.
ScanNCut and DesignNCut Accessories
Note: For detailed instructions on the use, installation and care of these products please refer to your machine’s user manual.
NEW!NEW! NEW!
Note: For detailed instructions on the use, installation and care of these products please refer to your machine’s user manual.
RHINESTONE STARTER KIT (CARSKIT1)
This kit contains all the materials you need to create one-of-kind personalised rhinestone projects!
Kit Includes: an activation card to access 100 rhinestone patterns on ScanNCutCanvas, over 4 types of coloured hot fix rhinestones, backing board, 2 template and transfer sheets, positioning brush and pick-up tool.
This kit needs a PC or a tablet, internet access and USB memory device or Wi-Fi if in use with CM350, CM700 or CM900 or DesignNCut,
RHINESTONE TRANSFER SHEETS (CARSTS1)
This is a consumable item to create rhinestone projects for use with the Brother ScanNCut or DesignNCut machine and the Rhinestone Starter Kit (both sold separately). Store at normal room temperature, away from direct sunlight, high humidity and heat.
Includes: 7 Transfer Sheets 12” x 12” (305mm x 305mm).
Rhinestones
RHINESTONE 20SS REFILL PACK, 4.6 - 4.8MM X 200PCS
For use with the Brother ScanNCut or DesignNCut machine. Available in Multi-colour or clear
Multi-colour: CARS20M |Clear: CARS20C
RHINESTONE 6SS REFILL PACK, 1.9-2.1MM X 800PCS
This is a consumable item to create rhinestone projects for use with the Brother ScanNCut or DesignNCut machine and the Rhinestone Starter Kit (both sold separately). Available in Multi-colour or clear Multi-colour: CARS6M Clear: CARS20C
RHINESTONE 16SS REFILL PACK, 3.8-4.0MM X 400PCS
For use with the Brother ScanNCut or DesignNCut machine. Available in Multi-colour or clear
Multi-colour: CARS16M Clear: CARS16C
RHINESTONE 10SS REFILL PACK, 2.8 MM - 2.9 MM X 800 PCS
For use with the Brother ScanNCut or DesignNCut machine. Available in Black, Clear, Pink, Red, Turquoise or Yellow
Black: CARS10B Clear: CARS10C Pink: CARS10P Red: CARS10R Turquoise: CARS10T Yellow: CARS10Y
RHINESTONE SHEET SET (CARSSH1)
This is a consumable item to create rhinestone projects for use with the Brother ScanNCut or DesignNCut machine and the Rhinestone Starter Kit (both sold separately). Store at normal room temperature, away from direct sunlight, high humidity and heat.
Includes: 3 Template Sheets 12” x 12” (305mm x 305mm), 3 Transfer Sheets 12” x 12” (305 mm x 305 mm).
ScanNCut and DesignNCut Accessories
NEW!NEW!NEW!
NEW!
Note: For detailed instructions on the use, installation and care of these products please refer to your machine’s user manual.
Fabric Applications and Sheets
IRON-ON FABRIC APPLIQUÉ CONTACT SHEET 36” X 18.5” 1 SHEET (CASTBL1)
Iron-on permanent sheet, used to cut fabrics for Appliqué with the Brother ScanNCut or DesignNCut machine. Iron the contact sheet on to your fabric, remove the backing paper and press onto the standard mat, then cut your Appliqué design. Do not use on textured fabrics that cannot be ironed.
STENCIL SHEET 12” X 24” 1 SHEET (CASTCL1)
Use to create stencils with the Brother ScanNCut machine or DesignNCut machine. Reusable and self-adhesive. Affix cut stencil designs directly to desired projects. For best results, use on smooth surfaces. Great for home décor, paper projects, and fabric art!
HIGH TACK ADHESIVE FABRIC SUPPORT SHEET 12” X 12” 4 SHEETS (CASTBL2)
The high tack support sheet is applied to the standard mat for extra support and to protect the mat when cutting fabric used for piecing and patchwork projects. For use with the Brother ScanNCut or DesignNCut machine.
ADHESIVE CRAFT VINYL ROLLS
For use with the Brother ScanNCut or DesignNCut machine. 1 roll, 12 inches x 6 feet. Available in white, black, silver, gold, red, blue or plum.White: CAVINYLWTBlack: CAVINYLBKSilver: CAVINYLSRGold: CAVINYLGDRed: CAVINYLRDBlue: CAVINYLBEPlum: CAVINYLPM
ADHESIVE CRAFT VINYL 10 SHEETS (CAVINYLMP)
For use with the Brother ScanNCut or DesignNCut machine. Assorted colours, 12 x 12 inches
TRANSFER PAPER (CAVINYLTPG)
For use with the Brother ScanNCut or DesignNCut machine. Use with the Brother adhesive craft vinyl. 1 roll, 12 inches x 6 feet. Printed grid for easy alignment of vinyl cut designs. Clear material for easy placement onto most surfaces.
Great for
Appliqué
RhinestonesVinyl
1 Roll 12 inches x 6 feetThickness: 3.0 mil
Transfer Paper
Transfer PaperProject Idea: Working with Vinyl Life is Beautiful Canvas.
For full instructions, visit www.ScanNCut.com.
/BrotherScanNCutUSA
• Printed grid for easy alignment
of vinyl cut designs!• Clear material for easy placement onto most surfaces!
• For use with ScanNCut Adhesive
Craft Vinyl to create your own
one-of-a kind signs, stencils,
glass etchings, home décor and
so much more!
1
3
5
2
4
6
For more information, visit ScanNCut.com
or call 1-800-4-A-BROTHER.
Item # CAVINYLTPG
Distributed by Brother International Corporation
200 Crossing Boulevard, Bridgewater, NJ 08807
Made in USA
Images for illustration purposes only.
• Removable• Indoor/Outdoor use• Great for creating your own one-of-a kind signs, stencils,
glass etchings, car decals, ornaments, home décor and so much more!
1 Roll 12 inches x 6 feetThickness: 3.0 mil
AdhesiveCraft Vinyl
Adhesive Craft VinylThis Adhesive Craft Vinyl is removable on most
surfaces. Adhere to glass, plastic, metal, walls,
and virtually any nonporous surfaces with
ease. Use the gridded transfer paper for
application (sold separately).Project Idea:For full instructions, visit www.ScanNCut.com.
1
3
5
2
4
6
For more information, visit ScanNCut.com
or call 1-800-4-A-BROTHER.
Distributed by Brother International Corporation
200 Crossing Boulevard, Bridgewater, NJ 08807
Made in USA
Images for illustration purposes only.
/BrotherScanNCutUSA
NEW!NEW! NEW!
Note: For detailed instructions on the use, installation and care of these products please refer to your machine’s user manual.
ScanNCut and DesignNCut Accessories
PRINTABLE STICKER STARTER KIT (CAPSKIT1)
This kit contains all the materials you need to create and personalise your own one-of-a-kind stickers and labels!
The kit includes: an activation card to access 100 template images on ScanNCutCanvas (plus the ability to create your own stickers and labels). Includes: 3 A4 Printable Stickers 8.3” x 11.7” (210mm x 297mm), 3 A4 Laminate Sheets 8.3” x 11.7” (210mm x 297mm), Scraper, Lifter and Instruction Guide. This kit needs a PC or a tablet, internet access and USB memory device or Wi-Fi if in use with CM350, CM700 or CM900 or DesignNCut. For inkjet printers only.
PRINTABLE STICKER SHEET SET (CAPSS1)
This is a consumable item to create printable sticker projects for use with Brother ScanNCut or DesignNCut machine and the Printable Sticker Kit (both sold separately).
Includes: 7 A4 Printable Stickers 8.3" x 11.7" (210 mm x 297 mm), 7 A4 Laminate Sheets 8.3" x 11.7" (210 mm x 297 mm). For inkjet printers only.
MINI PRINTABLE STICKER SET (CAPSSMINI)
Print your favorite images, and then cut and create your own design stickers and labels! Great for crafters, small businesses, and home use. Now in postcard size – a great size for printing photos and turning them into stickers!
Includes: 7 Printable Stickers 3.9” x 5.8” (100mm x 148mm) and 7 Laminate Sheets x 3.9” x 5.8” (100mm x 148mm).
For use with Brother ScanNCut machine or DesignNCut machine and Printable Sticker Starter Kit (sold separately). For inkjet printers only.
Printable Sticker Kit with Lamination
STAMP STARTER KIT(CASTPKIT1)
This kit contains everything you need to create one-of-a kind clear stamps!
Includes: 3 Stamp Sheets: 6” x 8” (150mm x 200mm, acrylic block with grid 3” x 4” (75mm X 100mm), activation card with access to 50 stamp patterns and ability to create your own designs and instruction sheet. This kit needs a PC or a tablet, internet access and USB memory device or Wi-Fi if in use with CM350, CM700 or CM900 or DesignNCut machine.
STAMP SHEETS (CASTPS1)
This is a consumable item to create stamp projects for use with the Brother ScanNCut or DesignNCut machine and the Stamp Starter Kit (both sold separately).
Includes: 3 stamp sheets: 6” x 8” (150mm x 200mm). For best results, use the Standard Mat and Standard Blade.
ACRYLIC STAMP BLOCK SET (CASTPBLS1)
This Stamp Block Set allows more freedom in the size options of the silicone stamp material you cut. Positioning your design on paper and other surfaces is made easier with this set and you can use silicone stamp material, craft foam and rubber to make one-of-a-kind stamped projects. Includes: 1 acrylic piece with grid: 2” x 3” (50mm x 75mm), 1 acrylic piece with grid: 2” x 6” (50mm x 152mm). For use with Brother ScanNCut or DesignNCut machine and Brother Stamp Starter Kit and Stamp Sheets (both sold separately).
Stamp Kits
EMBOSSING STARTER KIT# (CAEBSKIT1)
The ScanNCut Embossing Starter Kit provides all of the materials you need to create an embossing effect on paper and metal. Now, there are so many possibilities to create unique projects with both line embossing and region embossing functions. OKit Includes: 1 embossing mat 12” x 9.5”, 1 embossing tool holder, 2 embossing tools, 1 silver metal sheet 7.9” x 6.1”, 1 brass metal sheet 7.9” x 6.1”, 1 template sheet 12” x 12”, 1 scanning support sheet 12” x 12” and activation card for access to 50 embossing patterns on ScanNCutCanvas plus instruction guide.
EMBOSSING TEMPLATE SHEETS (CAEBSTS1)
Use these template sheets with the “Region Embossing” function to create dimensional embossed designs on paper. Once a template design is created, it can be used many times.
Includes: 3 pieces of 12” x12” (305mm x 305mm) template sheets. For use with the Brother ScanNCut and the Embossing Starter Kit (sold separately).
EMBOSSING MAT (CAEBSMAT1)
Made of special material specifically for ScanNCut or DesignNCut embossing. Use with the “Line Embossing” function to create beautiful dimensional projects.
Includes: 12” x 9.5” (305mm x 241mm) mat. This mat holds a variety of papers and metal sheets, just apply the Embossing Mat directly to the Standard Mat or Middle Tack Adhesive Mat of your ScanNCut or DesignNCut machine. For use with the Brother ScanNCut or DesignNCut and the Embossing Starter Kit (sold separately).
EMBOSSING SILVER METAL SHEETS (CAEBSSMS1)
Use these silver metal sheets to create unique embossing projects, from greeting cards to home décor items. Includes: 2 pieces of 7.9” x 6.1” (200mm x 155mm) metal sheets. Each metal piece is protected by self-adhesive sheets on the front and back to avoid damage to the scanner glass,embossing tool and silver colour metal. Metal sheet is made of aluminium. For use with either the Brother ScanNCut or DesignNCut machine and the Embossing Starter Kit (sold separately).
EMBOSSING BRASS METAL SHEETS (CAEBSBMS1)
Use these brass coloured copper sheets to create unique embossing projects, from greeting cards to home decor items. Includes: 2 pieces of 7.9”×6.1” (200mm x 155mm) brass coloured copper sheets. Each sheet is protected by self-adhesive sheets on the front and back to avoid damage to the scanner glass, embossing tool and brass coloured copper sheet. For use with the Brother ScanNCut or DesignNCut machine and the Embossing Starter Kit (sold separately).
Specifications subject to change without notice
www.brother.com.au/brotheraustralia
Contact :
Embossing Kits and Tools
# Only the line embossing function is available for the DesignNCut machine. Both the line embossing and region embossing functions are available for the ScanNCut machine