savera overview - Teknion · 2020-01-21 · • Savera Chairs have been designed and tested for...

work chairs

seating price & application guide – September 28, 2020106

savera overview

• Savera Chairs have been designed and tested for users weighing up to 275 lbs (Swivel Tilt Task and Stool), 300 lbs (Synchro-tilt + Multi-tilt Task), 350 lbs (Guest) and 400 lbs (Savera XL)

• Savera Chairs are equipped with casters intended for use on carpeted surfaces . Use of these casters on hard surfaces could result in unexpected rolling and tipping . Casters designed for use on hard surfaces are available . If in doubt, see your dealer for appropriate selection

• Task Chair with Synchro-Tilt shown . Swivel-Tilt mechanism and Multi-Tilt Mechanism also available

Savera, classic form with comfort and performance at an exceptionally affordable price.

Statement of Line

Heavy Duty Five Star Base

Heavy Duty Synchro-Tilt Mechanism

SAVERA XL

Tension Control

2 3/8" Hard Casters are standard

Seat Height Adjustment of 4"

Mid-Back – No Arms

Mid-Back – Fixed T-Arms

Mid-Back – 2D Arms

Mid-Back – 4D Arms

High-Back – No Arms

High-Back – Fixed T-Arms

High-Back – 2D Arms

High-Back – 4D Arms

Swivel Stool – No Arms

Swivel Stool – 2D Arms

Swivel Stool – 4D Arms

XL Mid-Back – No Arms

XL Mid-Back – Standard

XL Mid-Back – Generous

Outer Back is Plastic

Back-Tilt (Not shown)

Lumbar Apex Height Adjustment of 2 3/4"

Seat Depth Adjustment of 2"

2 3/8"

Tension Control

Arm Height Adjustment 2D – 4" 4D – 4 3/4"

Standard Seat Height Adjustment of 4"

Total Arm Width Adjustment 2D – 1 1/2"

4D – 4"Five Star Base

Clearance between armrests: 20 1/2" or 23

work chairs

107seating price & application guide – September 28, 2020

Arm

Hei

ght

from

Sea

t Fi

xed

T-A

rms

7 3/

4"

2D 6

3/4

" -

10 3

/4"

4D 7

1/4

" -

12"

XL

7" -

11"

Width Between Arms Fixed T-Arms 19"2D 17 3/4" - 20 3/4" 4D 16"- 20 " XL Standard 20 1/2" XL Generous 23"

Bac

k H

eigh

t fr

om S

eat

Tas

k M

id-B

ack

20"

Tas

k H

igh-

Bac

k 26

" X

L 23

"

Ove

rall

Hei

ght

Tas

k M

ulti

-Tilt

-Mid

-Bac

k 35

1/4

"-39

1/4

"

Sync

hro-

Tilt

-Mid

-Bac

k 37

"-41

" T

ask

Mul

ti-T

ilt-H

igh-

Bac

k 39

1/4

"-43

1/4

" S

ynch

ro-T

ilt-H

igh-

Bac

k 41

"-45

" T

ask

Stoo

l 46"

-54"

XL

40"-

44"

Seat Width Task 17 3/4" XL Small 22" XL Large 22"

Back Width Task 17" XL 21"

Lumbar Apex Height Task 6 1/2" - 9 1/4" XL 9"

Seat Depth Task 16 1/2"- 18 1/2" General Use 17" XL Small Seat 17 1/2" XL Large Seat 20 1/4"

Seat

Hei

ght

from

Flo

orT

ask

Stan

dard

14

3/4"

- 18

3/4

" (M

ulti

-Tilt

15

3/4"

- 19

3/4

")

Tas

k H

igh

16"-

21"

(M

ulti

-Tilt

17"

- 22

")

Tas

k Lo

w 1

3 1/

2"-

16"

(Mul

ti-T

ilt 1

4 1/

2"-

17")

St

ool 1

9 1/

4"-

26 3

/4"

XL

17 3

/4"-

21

3/4"

Angle between Seat and Back Task 103˚ - 120˚XL 95˚

Overall Width Task 30" XL 31 1/2" XL Small Seat 31 1/2" XL Large Seat 31 1/2"

Overall Depth Task 30" XL Small Seat 31 1/2" XL Large Seat 31 1/2"

savera dimensions & material requirements

SINGLE UPHOLSTERED DUAL UPHOLSTERED – SEAT DUAL UPHOLSTERED – BACK COM COL COM COL COM COL [yards] [sq . ft] [yards] [sq . ft] [yards] [sq . ft]

Mid-Back 1 9 1 6 3/4 4Mid-Back (XL) 1 1/2 19 1/2 1 10 1/2 1 9 1/4High-Back 1 11 1/2 1 8 1 1/2 7 1/2

Dimensions

For Conversion to Metric, multiply dimension by 25 .4

COM/COL Material Requirement

More yardage may be required depending upon the upholstery pattern, repeat, directionality and pattern matching . Leather yield varies from 60-80% and may be affected by the quality of the COL including location and quantity of blemishes, size and shape of hide . The size of the sewing pattern and the number of units ordered may also impact yield . Always round-up to the next hide .

WEIGHTGeneral Use/Synchro-Tilt Task 40 lbsMulti-Tilt Task 67 lbsStool 41 lbsExecutive/XL 64 lbs

work chairs


savera arm adjustment features & instructions

ARM WIDTH ADJUSTMENT

ARM HEIGHT ADJUSTMENT ARM HEIGHT ADJUSTMENT

4D ARM PIVOT ADJUSTMENT 4D ARM SLIDER ADJUSTMENT

To adjust the arm width on Savera Synchro-Tilt, Multi-Tilt, Swivel-Tilt and Stool, push the lever down and slide the arm to the desired position . Push the lever up to lock the arm in place .Savera XL arms are fixed prior to shipping in either standard or generous position .

2D ARMS:To adjust the arm height, lift the small button on the outside of either arm to raise or lower it to the desired position .

4D ARMS:To adjust the arm height, press the button located behind either arm to raise or lower it to the desired position . Release the button to lock in place .

To adjust the arm cap depth position, grasp the arm cap and firmly slide forward or backward to the desired position .

To pivot the armrest, grasp the arm cap, rotate inward or outward and release at the desired position . Not available on Savera XL .

work chairs


savera synchro-tilt adjustment features & instructions

BACK TILT ADJUSTMENT TENSION CONTROL

LUMBAR HEIGHT ADJUSTMENT SEAT HEIGHT ADJUSTMENT

SEAT DEPTH ADJUSTMENT

SYNCHRO-TILT TASK:The tension-adjustment knob for the Synchro-Tilt Task chair is located in the center below the front of the seat . Leaning back, decide if the resistance of the chair is comfortable . If it is too stiff, turn the tension adjustment knob counter-clockwise . If the chair back does not provide enough resistance, rotate the knob clockwise .

SYNCHRO-TILT TASK:The tilt control paddle on the left locks the chair into four different positions . To tilt the chair, sit in the chair and unlock the paddle by pushing it down, which will release the back to free flow . To lock in position, pull the paddle up and the back will lock in position .

The seat height-adjustment paddle for Savera Synchro-Tilt, Swivel-Tilt and XL is located underneath the seat on the right side .To raise the chair, lift the paddle up, while lifting your weight from the seat, until you reach the desired height, then release . To lower the chair, lift the paddle up, allowing your weight to push the seat down until you reach the desired height, then release .The seat height-adjustment paddle for Savera Stool functions the same but the paddle is located on the left side .

See “Savera arm adjustment features and instructions” page at the beginning of this section for arm details .

The lumbar height-adjustment levers for Savera Synchro-Tilt, Multi-Tilt, Swivel-Tilt and Stool are found on both sides of the chair . Pull both levers up or down to the desired position . Savera XL does not have lumbar height adjustment .

SWIVEL-TILT AND SYNCHRO-TILT-TASK:The lever is located on the left-hand side, near the front . To adjust the seat depth, lift lever up . Simultaneously lift your weight from the seat while sliding the seat forward or backward . Release the lever to lock the seat in place .

work chairs


savera XL adjustment features & instructions


SEAT HEIGHT ADJUSTMENT

SYNCHRO-TILT XL:The back tilt adjustment paddle is located underneath the seat on the left side . The back tilt adjustment provides the ability to lock the back into four different positions or leave in free flow .To tilt the chair, sit in the chair and unlock the paddle by pulling it up, which will release the back to free flow . To lock the desired position, push the paddle down and the back will lock .

SYNCHRO-TILT XL:The tension-adjustment wheel is located underneath the seat on the right side .Leaning back with the back tilt adjustment paddle in the up position, determine if the resistance of the chair is comfortable . If the resistance is too stiff, turn the tension adjustment wheel counter-clockwise . If the chair back does not provide enough resistance, turn the wheel clockwise .



work chairs


savera multi-tilt adjustment features & instructions



SEAT DEPTH ADJUSTMENT SEAT ANGLE ADJUSTMENT

The seat height adjustment paddle on the Multi-Tilt is located on the right-hand side, underneath the arm post .To raise the chair, lift the paddle up, while lifting your weight from the seat, until you reach the desired height, then release . To lower the chair, lift the paddle up, allowing your weight to push the seat down until you reach the desired height, then release .

The tension adjustment knob for the multi-tilt is located in the middle, directly under the front of the seat . Turning the knob counter-clockwise will increase the tension and clockwise will decrease the tension .

The Tilt control lever is on the right-hand side and is located at the farther back position .To lock the back, lean back to the desired angle and firmly push the lever down to engage it . To unlock and free-float, firmly pull up the lever to the horizontal position .

The paddle is located on the left-hand side, near the back . To adjust the seat depth, lift lever up . Simultaneously lift your weight from the seat while sliding the seat forward or backward . Release the lever to lock the seat in place .

The lumbar height-adjustment levers for Savera Synchro-Tilt, Multi-Tilt, Swivel-Tilt and Stool are found at the sides of the chair . Pull levers up or down to the desired position . Savera XL does not have lumbar height adjustment .

The seat angle may be infinitely adjusted when the paddle is in the horizontal position . Firmly push the lever down to lock the seat angle and pull up to the horizontal position to allow free floating .

The Forward-Tilt knob is located closest to the front . Rotate it forward and rearward to adjust the seat angle incline .

work chairs


savera swivel-tilt adjustment features & instructions



SEAT DEPTH ADJUSTMENT

SWIVEL-TILT TASK:The back-tilt control lever is located on the right near the front . To tilt the chair, sit in the chair and pull the handle outward . Leaving the handle in this position, the chair is now in free flow mode and can reach any position between upright and fully reclining . To lock (upper position only), bring chair to upright position and push the handle in .

SWIVEL-TILT TASK:The tension-adjustment knob for the swivel-tilt is located in the middle directly under the seat . Turning the knob will increase or decrease tension .


The lumbar height-adjustment levers for Savera Synchro-Tilt, Multi-Tilt, Swivel-Tilt and Stool are found at both sides of the chair . Pull both levers up or down to the desired position . Savera XL does not have lumbar height adjustment .

SWIVEL-TILT AND SYNCHRO-TILT-TASK:The lever is located on the left-hand side, near the front . To adjust the seat depth, lift lever up . Simultaneously lift your weight from the seat while sliding the seat forward or backward . Release the lever to lock the seat in place .


work chairs


savera swivel-stool adjustment features & instructions

STOOL SEAT HEIGHT STOOL FOOT RING HEIGHT

LUMBAR HEIGHT ADJUSTMENT

To raise or lower the stool’s foot ring, turn the foot ring’s knob counter clockwise to release the foot ring and adjust the ring until you reach the desired level . Turn the knob clockwise to lock in place .

To raise the chair, lift the paddle up while lifting your weight from the seat until you reach the desired level and then release to lock in place . To lower the chair, lift the paddle up allowing your weight to push the seat down to the desired level and then release to lock in place .

The lumbar height-adjustment levers for Savera Synchro-Tilt, Swivel-Tilt and Stool are found at the sides of the chair . Pull levers up or down to the desired position . Savera XL does not have lumbar height adjustment .


work chairs


N S A YSavera – Synchro-Tilt Task Chair

FEATURES• Standard pneumatic cylinder provides height adjustment of 4"• Seat depth adjustment of 2"• Lumbar height adjustment of 2 3/4"• Back-tilt can be locked in four positions or left free flow• Frame, five star base and outer back are plastic• Synchro-tilt 3:1 ratio• Tension control• Hard casters are standard and are well suited for soft flooring such as carpeting• Soft casters are available for use on hard flooring, such as wood, concrete, or tileNOTESNot all configurations are available as Xpress . Please see Xpress catalogue and/or specification software for details .

Xpress

Fixed T-Arm

2D Arm

4D Arm

Size

F Mid-Back

H High-Back

Arm Style

N No Arms

F Fixed T-Arms

W 2D Height and Width-Adjustable T-Arms

Q 4D Width, Height and Depth-Adjustable T-Arms with Pivoting Arm Caps

Mechanism Style

1 Standard

Upholstery/Back Style

P Single Upholstered

Seat Upholstery

Finish

Fabric

Leather

Seat Depth Adjustment

N No Seat Depth Adjustment

S With Seat Depth Adjustment

Cylinder Style

1 Standard

2 High

3 Low

Base Finish

E Ebony

Casters/Glides (Optional)

~ Casters, Hard

A Casters, Soft

B Glides, Hard

C Glides, Soft

Other Options

~ Not Fully Assembled

F Fully Assembled

PRODUCT OPTIONS

DESCRIPTION PRICE COM/ COL/MID-BACK (F) Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10

No Arms 688 717 748 780 808 839 869 900 932 1036Fixed T-Arms 789 820 849 880 909 940 971 1001 1033 11372D Height and Width-Adjustable T-Arms 820 849 880 910 940 971 1001 1033 1063 11684D Width, Height and Depth-Adjustable T-Arms 853 883 913 943 973 1004 1035 1066 1096 1202

Leather Leather Leather Leather LA LB LC LD

No Arms 904 935 1029 1060Fixed T-Arms 1005 1036 1130 11622D Height and Width-Adjustable T-Arms 1037 1068 1162 11924D Width, Height and Depth-Adjustable T-Arms 1070 1100 1194 1225

If Seat Depth Adjustment (S) is specified add 63 If Soft Casters (A) are specified add 21 If Hard Glides (B) are specified add 21 If Soft Glides (C) are specified add 33 If Fully Assembled (F) is specified add 4

Pricing is continued on the following pages.

NSAY F 1 N P L207 S 1 E F

SAMPLE ORDER CODE

work chairs


N S A YSavera – Synchro-Tilt Task Chair

(Continued)

Xpress

DESCRIPTION PRICE COM/ COL/HIGH-BACK (H) Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10



No Arms 972 1011 1132 1172Fixed T-Arms 1073 1113 1234 12732D Height and Width-Adjustable T-Arms 1105 1145 1266 13054D Width, Height and Depth-Adjustable T-Arms 1137 1177 1299 1338If Seat Depth Adjustment (S) is specified add 63 If Soft Casters (A) are specified add 21 If Hard Glides (B) are specified add 21 If Soft Glides (C) are specified add 33 If Fully Assembled (F) is specified add 4

work chairs


N S A XSavera XL – Synchro-Tilt Task Chair

FEATURES• Standard pneumatic cylinder provides height adjustment of 4"• Synchro-tilt 3:1 ratio• Seat and back inner construction are plywood• Frame, five star base and outer back are plastic• Tension control• Frame, five star base and outer back are plastic• Hard casters are standard and are well suited for soft flooring such as carpeting• Soft casters are available for use on hard flooring, such as wood, concrete, or tileNOTESStandard vs Generous Arms: Arms are the same height adjustable style, width clearance is 20 1/2" for Standard and 23" for Generous . Arm placement is done by plant prior to shipping . Single Upholstered: The same fabric is applied to the seat and inside back .

Size

F Mid-Back

Mechanism Style

1 Standard

Arm

N No Arms

S Standard

G Generous

Upholstery Style


Back Upholstery Finish

Fabric

Leather

Seat Upholstery Finish

(For Dual)

Fabric

Leather

Seat Depth

S Small

L Large

Cylinder Style

1 Standard

Base Finish

E Ebony


~ Casters, Hard

A Casters, Soft

B Glides, Hard

C Glides, Soft

PRODUCT OPTIONS

SAMPLE ORDER CODE

NSAX F 1 S P L 1 E A

DESCRIPTION PRICE COM/ COL/ Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10

No Arms 1307 1348 1390 1432 1473 1514 1556 1596 1638 1780Standard 1427 1468 1510 1552 1592 1633 1675 1716 1758 1901Generous 1427 1468 1510 1552 1592 1633 1675 1716 1758 1901


No Arms 1728 1796 1997 2065Standard 1846 1913 2116 2184Generous 1846 1913 2116 2184If Soft Casters (A) are specified add 21 If Hard Glides (B) are specified add 21 If Soft Glides (C) are specified add 33

L207

work chairs


N S A MSavera Multi-Tilt Task Chair

FEATURES• Standard pneumatic cylinder provides height adjustment of 4"• Seat depth adjustment of 2"• Lumbar height adjustment of 2 3/4"• Allows for independent adjustment of the back angle and seat tilt . Includes forward

seat tilt and lock and infinite position seat tilt lock• Frame, five star base and outer back are plastic• Center-tilt action• Tension control• Hard casters are standard and are well suited for soft flooring such as carpeting• Soft casters are available for use on hard flooring, such as wood, concrete, or tileNOTESSingle Upholstered: The same fabric is applied to the seat and inside back .Not all configurations are available as Xpress . Please see Xpress catalogue and/or specification software for details .Seat depth adjustment is included as a standard feature .


No Arms 817 847 878 909 938 968 999 1029 1061 1166Fixed T-Arms 919 949 979 1009 1039 1070 1100 1131 1162 12674D Width, Height and Depth Pivot Arms 983 1013 1042 1073 1102 1134 1164 1195 1226 13312D Height and Width-Adjustable T-Arms 949 979 1009 1040 1070 1100 1131 1162 1193 1297


No Arms 1034 1064 1158 1190Fixed T-Arms 1135 1166 1259 12914D Width, Height and Depth Pivot Arms 1199 1230 1324 13542D Height and Width-Adjustable T-Arms 1167 1197 1291 1322

COM/ COL/HIGH-BACK (H) Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10

No Arms 844 874 903 935 965 996 1026 1057 1089 1193Fixed T-Arms 945 975 1004 1036 1066 1097 1128 1158 1190 12944D Width, Height and Depth Pivot Arms 1008 1039 1068 1099 1097 1161 1192 1223 1252 13572D Height and Width-Adjustable T-Arms 975 1006 1036 1066 1097 1128 1158 1190 1220 1325


No Arms 1101 1140 1262 1302Fixed T-Arms 1202 1243 1364 14034D Width, Height and Depth Pivot Arms 1267 1307 1428 14672D Height and Width-Adjustable T-Arms 1234 1274 1396 1435

Size

F Mid-Back

H High-Back

Mechanism Style

1 Standard

Arm Style

N No Arms

F Fixed T-Arm

W Width and Height-Adjustable T-Arms

Q 4D Width, Height and Depth pivot arm

Upholstery Back Style



Fabric


Fabric

Cylinder Style

1 Standard - 4" range

2 Higher (taller) - 5" range

3 Lower (shorter) - 3" range

Base Finish

E Ebony


~ Casters, Hard

A Casters, Soft

B Glides, Hard

C Glides, Soft

Assembled

F Fully Assembled

PRODUCT OPTIONS

SAMPLE ORDER CODE

NSAM F 1 N P 1 E A F

If Soft Casters (A) are specified add 21 If Hard Glides (B) are specified add 21 If Soft Glides (C) are specified add 33

L207

Fixed T-Arm

2D Arm

4D Arm

work chairs


N S A WSavera – Swivel-Tilt General Use Chair

FEATURES• Standard pneumatic cylinder provides height adjustment of 4"• Seat depth adjustment of 2"• Lumbar height adjustment of 2 3/4"• Back-tilt locks in the upright position• Frame, five star base and outer back are plastic• Swivel-tilt• Tension control• Hard casters are standard and are well suited for soft flooring such as carpeting• Soft casters are available for use on hard flooring, such as wood, concrete, or tileNOTESSingle Upholstered: The same fabric is applied to the seat and inside back .Not all configurations are available as Xpress . Please see Xpress catalogue and/or specification software for details .

Xpress

Fixed T-Arm

2D Arm

4D Arm

Size

F Mid-Back

H High-Back

Arm Style

N No Arms

F Fixed T-Arms



Mechanism Style

1 Standard

Upholstery Style


Back Upholstery

Finish

Fabric

Leather

Seat Upholstery

Finish (For Dual)

Fabric

Leather

Seat Depth Adjustment

N No Seat Depth Adjustment

S With Seat Depth Adjustment

Cylinder Style

1 Standard

2 High

3 Low

Base Finish

E Ebony


~ Casters, Hard

A Casters, Soft

B Glides, Hard

C Glides, Soft

Other Options


F Fully Assembled

PRODUCT OPTIONS

SAMPLE ORDER CODE




No Arms 839 869 963 995Fixed T-Arms 940 971 1064 10962D Height and Width-Adjustable T-Arms 971 1001 1095 11274D Width, Height and Depth-Adjustable T-Arms 1003 1034 1128 1158

COM/ COL/HIGH-BACK (H) Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10



No Arms 906 945 1067 1106Fixed T-Arms 1008 1048 1168 12082D Height and Width-Adjustable T-Arms 1038 1078 1198 12394D Width, Height and Depth-Adjustable T-Arms 1071 1111 1231 1271If Seat Depth Adjustment (S) is specified add 63 If Soft Casters (A) are specified add 21 If Hard Glides (B) are specified add 21 If Soft Glides (C) are specified add 33 If Fully Assembled (F) is specified add 4

NSAW H W1 P N 3 E FA101

work chairs


N S A DSavera – Swivel Stool

FEATURES• Standard pneumatic cylinder provides height adjustment of 8" travel• Swivels 360˚• Frame, five star base and outer back are plastic• Hard casters are standard and are well suited for soft flooring such as carpeting• Soft casters are available for use on hard flooring, such as wood, concrete, or tileNOTESSingle Upholstered: The same fabric is applied to the seat and inside back .

Size

F Mid-Back

Mechanism Style

1 Standard

Arm Style

N No Arms



Upholstery Style



Fabric

Leather


(For Dual)

Fabric

Leather

Base Finish

E Ebony


~ Casters, Hard

A Casters, Soft

B Glides, Hard

C Glides, Soft

Other Options (Optional)


F Fully Assembled

PRODUCT OPTIONS

SAMPLE ORDER CODE

NSAD F 1 W P E F

DESCRIPTION PRICE COM/ COL/ Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10

No Arms 724 757 791 825 859 893 926 958 992 11062D Height and Width-Adjustable T-Arms 869 902 936 968 1002 1036 1069 1101 1134 12514D Width, Height and Depth-Adjustable T-Arms 905 938 972 1004 1038 1072 1105 1137 1171 1288


No Arms 945 976 1070 11012D Height and Width-Adjustable T-Arms 1093 1123 1215 12474D Width, Height and Depth-Adjustable T-Arms 1129 1158 1251 1283If Soft Casters (A) are specified add 21 If Hard Glides (B) are specified add 21 If Soft Glides (C) are specified add 33 If Fully Assembled (F) is specified add 4

A101

savera overview - Teknion · 2020-01-21 · • Savera Chairs have been designed and tested for...

Documents

Transcript of savera overview - Teknion · 2020-01-21 · • Savera Chairs have been designed and tested for...