SAP 4.7Installation Guide1
-
Upload
simran-singh -
Category
Documents
-
view
249 -
download
0
Transcript of SAP 4.7Installation Guide1
SAP 4.7 Installation Guide (Part-1)
1. System Requirement1.1. Pentium 41.2. Processor speed 2.4 Mhz or more.1.3. RAM 512 or more1.4. Hard Disk 120 GB
2. Operating System2.1. Windows NT with service pack 4 or2.2. Windows 2000 server with service pack 4
3. Operating System installation procedure.1. Install Windows 2000 Server2. Give the System Name as ERP3. Partition the Hard disk, The SAP Installation partition should be minimum
75GB free space4. Install the Motherboard Drives
4. Change the system date to future year so that SAP will run upto that date . This software will work for month from the date of installation. For example , Current Date : 12.10.2004Change the system date to 12.10.2005Grace period for SAP is 12.10.2005 +30After complete installation change system date to current date, SAP 4.7 will
run up to 12.10.2005 + 29 days with out expiry of licence.
5. Install the Network Adapter and assign an IP Address, If ur system is a Stand alone System Add Micro Soft Loop back Adapter
Start->Settings->Control Panel-> Add/Remove New hardware -> Next-> Add or Troubleshoot a device-> select Add New Device->Next->Select No, I want to select the hardware from the list->Next->select Network Adapters-> Next-> Select the Manufacturer Microsoft -> Microsoft Loop back Adapter->next -> Finish
Loop back Adapter Installation
Page 1 of 24
SAP 4.7 Installation Guide (Part-1)
Page 2 of 24
SAP 4.7 Installation Guide (Part-1)
Page 3 of 24
SAP 4.7 Installation Guide (Part-1)
Page 4 of 24
SAP 4.7 Installation Guide (Part-1)
Page 5 of 24
SAP 4.7 Installation Guide (Part-1)
Next- Finish
4. Assign IP Address
Page 6 of 24
SAP 4.7 Installation Guide (Part-1)
Page 7 of 24
SAP 4.7 Installation Guide (Part-1)
ok- ok
Check that the ipaddress is binded or not
Open the Command Prompt--- Type ipconfigIt will show the ipaddress configration
Ping the Ipaddress
Page 8 of 24
SAP 4.7 Installation Guide (Part-1)
5. Increase the Virtual Memory
Page 9 of 24
SAP 4.7 Installation Guide (Part-1)
Click on the Performance OptionPage 10 of 24
SAP 4.7 Installation Guide (Part-1)
Click on Change
Page 11 of 24
SAP 4.7 Installation Guide (Part-1)
Increase Virtual Memory to Initial Size. 2048Maximum Size 2560
Click on Set thenok - ok
6. 1st Step towards installation : Our operating system is loaded in drive C: and we want to install SAP on D: Drive
a. Create One folder named as 47ides in D:\ (D:\47ides)Copy the first CD (db1) to D:\47idesCopy the contents of 2nd to 7th CDs into D:\47IDES\db1\EXPORT1\DATAThe Size of the db1 should be 3.89GB
b. Copy the 8th CD(db2) into D:\47IDESCopy the contents of 9th to 14th th CDs into D:\47IDES\db2\EXPORT2\DATAThe Size of the db2 should be 4.25GB
c. Copy the 15th CD's db3 into D:\4.7idesCopy the 16th and 17th CD contents into D:\47ides\db3\Export3\DATAThe size of the db3 should be 1.83GB
d. Run the Oracle Setup D:\47ides\Oracle\Nt\i386\sapserver.bat
Nextnext-----Here it load the Oracle, After Installation Completed Successfully----.- Exit
Page 12 of 24
SAP 4.7 Installation Guide (Part-1)
Note :- (At the time of installation of oradba.exe , a dialog box will be pop up for installation of net8 configuration, check the check box for typical configuration of net8 click net , it will end the oracle installation)
Restart the System.
e. Run the j2sdk-1_4_1_05-windows-i586.exe from the Kernel CDIt will install java C:\j2sdk
Assign the Java paths in My Computer -> Control Panel -> System properties-Advanced Environment Variables
In the User Variable for Administrator
Click on NEW
Variable Name : JAVA_HOMEVariable Vaule : C:\J2SDK( This is Java Installed Directory)
Click OK
Under System VariableSelect Path - EditAdd C:\J2sdk\bin at the end of the existing path %SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;C:\jdk1.4\bin;
Page 13 of 24
SAP 4.7 Installation Guide (Part-1)
ok- ok
Test the Java compiler at the command prompt
C:\javac
7. SAP SETUP
Run the R3DLLINS.EXE from D:\4.7\kernel\NT\I386\NTPATCH
Run SETUP>EXE from D:\4.7\kernel\SAPINST\NT\SETUP.BAT
License Agreement Click - I Agree
Page 14 of 24
SAP 4.7 Installation Guide (Part-1)
Click on Next
It will Copy some files and it will prompt u for reboot
Page 15 of 24
SAP 4.7 Installation Guide (Part-1)
Click OK
CENTRAL INSTANCE
After Rebooting, Automatically the installation will start
Page 16 of 24
SAP 4.7 Installation Guide (Part-1)
Select SAP R/3 Enterprises 4.70 for Oracle
Click Next
License agreement - Click I Agree
Page 17 of 24
SAP 4.7 Installation Guide (Part-1)
Select Install Server Components - Click next
Give the SAP System ID “ERP”Select Instance Type - Central Instance
Page 18 of 24
SAP 4.7 Installation Guide (Part-1)
Click Next
Page 19 of 24
SAP 4.7 Installation Guide (Part-1)
Give the Instance Number “00”
Database ID - ERPHost - ERP( This is ur system Name)Click Next
Page 20 of 24
SAP 4.7 Installation Guide (Part-1)
Select the Local Installation and Click Next
Page 21 of 24
SAP 4.7 Installation Guide (Part-1)
Leave the Screen and Click Next
Give the Password (Ex: 123) For ERPADMClick Next
Page 22 of 24
SAP 4.7 Installation Guide (Part-1)
Give the Password for Service UserClick Next
Page 23 of 24
SAP 4.7 Installation Guide (Part-1)
Click Next
This will install Central InstanceIt will take 15 to 30 mins. Time
Page 24 of 24