Sanitary and Biopharm - Flow Componentsflowcomponents.com/Brochure AlfaLaval/Fittings...

Sanitary and Biopharm

Product Data for Fittings

Our fittings are manufactured at an Alfa Laval high-capacity facilityin Guaymas, Mexico. The facility utilizes continuous flowmanufacturing practices, keeping our distribution center fullystocked with the fittings you need. ISO9002 certification ensuresthat quality and dependable manufacturing practices are in place.

Our 54,000 square foot distributioncenter in Indianapolis, Indianaprovides a centeralized source foryour fittings shipments, and allowsfor efficiencies in picking, packingand shipping your order

Our Inside Sales Departmentis comprised of talentedindividuals with years ofexpertise. They will handleyour needs quickly andefficiently.

Fittings CatalogTable of Contents

Introduction…………………………………………………………I

Connection Types………………………………………………III

Ordering Information………………………………………………IV

Technical Information………………………………………………V

Basic Dimensions………………………………………………VI

Tri-Clamp ® Fittings 1Elbows Swivel Joints

2 A12MPS…………………………………………………………….1022 Gaskets2 42MP………………………………………………………………..113 40MP / 40MO………………………………………………………11

40MPF / 40MOF……………………………………………………11Tees 40MHP………………………………………………………………11

3 A40MP-GR / A40MO-GR………………………………………….123 40MPS………………………………………………………………1244 Orifice Plates

B7RMPS…………………………………………………………….5 A80MP………………………………………………………………12 Crosses Solid End CapsB9MP………………………………………………………………..6 16AMP / 16AMO…………………………………………………..12 Ferrules AdapterL14AM……………………………………………………………….6 14MPHR…………………………………………………………….1314WMPS / 14WMO……………………………………………….6 14MPHT………………………………………………………………13BS14AM…………………………………………………………….7 A14MHC…………………………………………………………….1414WLMP / 14WLMO………………………………………………7 17MP-14……………………………………………………………..1414RMP………………………………………………………………7 17MP-15……………………………………………………………..1414MPW……………………………………………………………..8 21MP………………………………………………………………..15

22MP…………………………………………………………………16Tri-Clamps13MHLA……………………………………………………………..8 Thermometer CapsA13MO………………………………………………………………8 23BMP………………………………………………………………1613MHHM……………………………………………………………9A13MHM…………………………………………………………….9 Reducers13MW………………………………………………………………..9 B31-14MP…………………………………………………………..1713MHHS / A13MHHS Fractional…………………………………10 B32-14MP…………………………………………………………..1713MHHS / A13MHHS 3-Segment………………………………..1013MHP / A13MHP…………………………………………………10

B2CMP………………………………………………………………2FMP-14…………………………………………………………….2FMP-15…………………………………………………………….2CMP-31MP………………………………………………………..B2KMP……………………………………………………………..

B7MP………………………………………………………………..B7MPS……………………………………………………………..B7IMPS……………………………………………………………..B7RMP……………………………………………………..


Tri-Weld Fittings 18Bends ReducersB2S………………………………………………………………….19 L31…………………………………………………………………..30L2S…………………………………………………………………..19 B31…………………………………………………………………..302WCL………………………………………………………………..19 31L2CM………………………………………………………………..19 31B2CMW……………………………………………………………..20 32L2C…………………………………………………………………..20 32L2F…………………………………………………………………..20B2KS…………………………………………………………………21 Bevel Seat Fittings 33B2KMW……………………………………………………………..21 Ferrules2WK………………………………………………………………….21 14………………………..…………………………………………..342WUL………………………………………………………………..22 L14A……………………..………………………………………….34

14PRFS……………………………………………………………..34Use-Point Fittings 14R…………………………………………………………………..34B2UMPBOA………………………………………………………..22 14W………………………………………………………………….35B2UMPSOA…………………………………………………………23 14WL………………………………………………………………..35

15…………………………………………………………………….35Tees L15A…………………………………………………………………35B7WWW…………………………………………………………….23 15TRFS………………………………………………………………36B7WWM……………………………………………………………..23 15R…………………………………………………………………..36B7WWMS…………………………………………………………..24 15W……………………………………………………………………36B7IWWMS…………………………………………………………..24 15WL…………………………………………………………………36B7WMSW…………………………………………………………..24B7RWWW (1 of 2)…………………………………………………25 NutsB7RWWM…………………………………………………………..26 13H…………………………………………………………………..37B7RWWMS…………………………………………………………27

GasketsCrosses ST40…………………………………………………………………37B9WWWW…………………………………………………………..28B9RWWWW………………………………………………………..28 Solid End Caps

16A…………………………………………………………………..37End Caps16W…………………………………………………………………..29 AdaptersB16W………………………………………………………………..29 14AHR………………………………………………………………..37

14AHT………………………………………………………………..38Adapters 15AHT………………………………………………………………..3819WB………………………………………………………………..29 21…………………………………………………………………….38

22…………………………………………………………………….38

B32M………………………………………………………………..

B31M………………………………………………………………..L32…………………………………………………………………..B32…………………………………………………………………..


Other Fittings 39 Solid End Caps DC Fittings 40 16AJP………………………………………………………………..45

Ferrules15TRFDC…………………………………………………………….40 GasketsL15ADC……………………………………………………………..40 40JP………………………………………………………………….45

Gaskets IPS Schedule 5 Fittings 46DC40…………………………………………………………………40 Ferrules

14WMV……………………………………………………………..46 H-Line Fittings 41 14WLMV…………………………………………………………….46

Ferrules 14MVW……………………………………………………………..46 H-14W………………………………………………………………..41 H-15W……………………………………………………………….41 Clamps

13MHLVA……………………………………………………………46Sold End Caps A13MV………………………………………………………………47 H-16A-14……………………………………………………………41 13MHHVM…………………………………………………………..47 13MHPV……………………………………………………………..47GasketsH40……………………………………………………………………41 Miscellaneous Fittings 49

Flared Nipples HDI Fittings 42 14VA…………………………………………………………………50

FerrulesHDI-14W…………………………………………………………….42 Lap JointsHDI-15W……………………………………………………………..42 14VB…………………………………………………………………50

Solid End Caps FlangesHDI-16A-14………………………………………………………….42 38SL………………………………………………………………….50HDI-16A-15………………………………………………………….42

Pipe HangersClamps A24FCF……………………………………………………………..51HDI-13-UD…………………………………………………………..43 A24FCF-08………………………………………………………….51

B24FCF………………………………………………………………52Gaskets C24FCF……………………………………………………………..52HDI-40………………………………………………………………..43 D24FCF……………………………………………………………..53

E24FCF……………………………………………………………..53Solid End Caps16AMV……………………………………………………………….47 Wall Plates

29…………………………………………………………………….53Gaskets40MV…………………………………………………………………48 Wrenches40MVF……………………………………………………………….48 25H…………………………………………………………………..54A40MV-GR…………………………………………………………..48 H25H…………………………………………………………………54

25HA…………………………………………………………………54 John Perry Fittings 44 H25HA……………………………………………………………….54

Ferrules14PRFJP…………………………………………………………….4415TRFJP……………………………………………………………..44L14AJP………………………………………………………………44L15AJP………………………………………………………………44

Fittings Introduction

Fittings

Bio-Pharmaceutical Fittings

Features and Benefits of Bio-Pharmaceutical Fittings

Alfa Laval, the leading manufacturer and innovator for sanitary fluid handling products, is your complete source for specialized fittings and tubing required in food, dairy, beverage, biotechnology and pharmaceutical process applications. Smooth, crevice-free interiors and secure, self-aligning joints are characteristic of our Tri-Clover® brand fittings. Each offers superior corrosion-resistance and unmatched service life. Tri-Clover brand fittings are designed and manufactured to ensure dimensional accuracy and structural integrity, making them easy to install. Tri-Clamp®

and Tri-Weld® Fittings are part of Alfa Laval's product line.

Tubing, also available from Alfa Laval, is manufactured to our stringent specifications, making it a perfect match for the Tri-Weld Fittings. Choose from a complete range of tube sizes and surface finishes.

Full Traceability - Material Test Reports (MTR's) are included with each shipment. MTR's are also available in an electronic file format upon request. Permanent markings on all components allow a quick identification of all Heat numbers, Material Grade, Surface Finish Designation to the BPE Standard (SFF1 or SFF4), and Manufacturer's logo.

Alfa Laval is proud to present their line of fittings designed for use in the Pharmaceutical and Bio-Technology Industries. This line consists of Tri-Clover parts with either Tri-Weld ends suitable for use with orbital welding equipment or self-aligning Tri-Clamp end connections.

Alfa Laval offers a full line of Bio-Pharm Fittings that are manufactured in compliance with the current revision of the ASME BPE Standards. Fittings that comply with the ASME BPE are designated by the "B" prefix in the model number and the "Px" finish code at the end of the part description.

Wide Range of Surface Finish offering - Alfa Laval offers a range of Mechanical Polish as well as Electropolish finishes. Mechanical polishing is achieved by using a progressive series of abrasives, from low to high grit. This provides a consistent internal finish for optimal cleaning. Electropolishing is a further process that promotes a Chromium enriched surface layer that maximizes corrosion resistance as well as minimizing potential bacterial buildup on the surface.

Metallurgy - Incoming raw material goes through a stringent inspection process to ensure its chemistry will be ideal for both weldability and electropolishing.

Quality Control Methods - Our manufacturing facilities operate under an approved ISO 9002 quality standard. Wall thickness integrity is maintained through the use of fabrication grade minimum wall tubing for all cold-formed tubular products. After cold forming, our tube product is resized to ensure that the ovality falls within the prescribed BPE tolerances. End facing is provided with a machined square-cut method. This allows for the most accurate and consistent orbital weld result. All fittings are put through 100% visual inspection. All tolerances are inspected with calibrated equipment. Surface finish is inspected with a calibrated profilometer to ensure the Roughness average (Ra) maximum is not exceeded.

Packaging and Labeling - All BPE items are individually capped and bagged in clear 6 mil. Poly bags or shrink-wrap. All product is labeled with a bar code, product information and manufacturing date. This provides easy identification and ensures that the product arrives to the job site clean and ready for welding.

I

Fittings Introduction

II

Sanitary fittings identified with this symbol on the following pages are accepted as meeting the 3A sanitary standards by the appropriate committees of the International Association of Milk, Food and Environmental Sanitarians, U.S. Public Health Service, and Dairy Industry Committee.

Note: Catalog product presentations including cataloged dimensions, designs and specifications are representative of product availability at time of publication only. Actual geometry, dimensions, and designs are subject to design and manufacturing changes without notice.

Note: Items Identified with the 3A symbol in this catalog are authorized to carry the symbol only for those versions that have a polished ID surface of 32 microinch Ra or better (#7, #3, or biopharm finishes).

Connection Types

Clamp Fittings

l

l

l

Threaded Fittings

l

l

l

Tri-Clamp HDI-Line H-Line

A connection is made up of a plain ferrule, a clamp, and a gasket. Tees, elbows and reducers are available with Tri-Clamp connections. All three styles are in compliance with 3A standards for C.I.P. (clean in place). The three types of clamp fittings are designed for use in Food, Dairy, Pharmaceutical and Chemical Industries.

Tri-Clamp connections are the industry standard, having nueter-style ferrules to simplify design and installation.H-Line and HDI-Line male/female ferrules self-align during tightening so joints are quick and easy to assemble or take apart.H-Line uses the same series of clamps as the Tri-Clamp.

Bevel Seat John Perry DC

III

A connection is made up of a plain ferrules, a threaded ferrule, a nut and a gasket. The faces on Bevel Seat fittings are angled to create a metal to metal sealing surface. A John Perry fitting consistes of a flat-faced threaded ferrule, a flat-faced plain ferrule and a profiled gasket. These joints are particularly useful with swing connections and flow diverter panels. A DC fitting utilizes the Bevel Seat plain ferrule and a threaded ferrule with a grooved face to retain a gasket. The three types of threaded fittings are designed for use in the Food, Dairy, and Beverage processing industries. Bevel Seat Joints are in compliance with 3A standards for manual cleaning. Both John Perry and DC fittings are in compliance with 3A standards for C.I.P. (clean-in-place).

Bevel SeatJohn PerryDC

Ordering Information

When ordering, please specify the complete part number including:description, size, material and surface finish

Example:

Available in finishes: 304 - #1 and #7; 316L - #1 and #7, PC, PL, PD and PM. See Surface Finish Codes chart on page IV.

Surface Finish CodesID or Product Contact Surface

--------

32

Microinches(µ-inch)

ASME BPE Finish Code

Maximum Surface Roughness (Ra)

SFF4

SFF1

Micrometers(µm)

0.80.8

0.50.40.5

0.4

32

15

Mechanical Polished

Mechanical Polished and Electropolished

201520 SFF1

SFF4 Polished to Ra, 32µ-inch / 0.8µm

Polished to Ra, 32µ-inch / 0.8µm

PolishingMethod

UnpolishedMechanical PolishedMechanical Polished

Mechanical PolishedMechanical Polished and Electropolished

OD or ProductNoncontact Surface

UnpolishedUnpolished

B2S - 1 - 316L - 7

A - B - C - D

B2S Bend 90°, Automatic Tri-Weld

SizeDimensions

A

in mm in mm

(Size)B

Finish Code

DT-7

1

73

IV

Polished to Ra, 32µ-inch / 0.8µm

PDPC

PM

PL

UnpolishedUnpolished

A

A

ADescription Complies to the

ASME BPE Standard

Designates Compliance with 3A

CMaterial

DFinish

Technical Information

Service Rating of Tri-Clamp® Connections

Size Tube OD ½ in and ¾ in 1 in and 1½ in 2 in 2½ in 3 in 4 in 6 in

13MHLA

at 70°F -- 150 150 150 150 100 --

at 250°F -- 125 125 125 125 75 --13MHHM

at 70°F -- 500 450 400 350 300 150

at 250°F -- 300 300 200 195 150 7513MHHS

at 70°F 2200 600 550 450 350 300 --

at 250°F 1200 300 275 225 175 150 --13MHP

at 70°F -- 1500 1000 1000 1000 800 300

at 250°F -- 1200 800 800 800 600 200A13MO

at 70°F -- 500 350 300 200 100 75

at 250°F -- 250 200 150 100 100 50A13MHM

at 70°F -- 500 450 400 350 300 150

at 250°F -- 300 250 200 175 150 75

Tri-Clamp® Gasket Materials

Buna-N(U)

EPDM(E)

Fluoro-elastomer

(SFY)Silicone

(X)PTFE

(G)

70 70 70 70 ---1875 1650 1212 1340 ---

340 317 272 260 ---

-65 to 200° F -60 to 300° F -20 to 350° F -40 to 450° F -40 to 200° F

Good Good to Excellent Good to Excellent Poor to Good Good to Excellent

Fair to Good Good to Excellent Poor to Good Poor to Fair Excellent

Resistance to Fats/Oils Good to Excellent Poor Good to Excellent Poor to Good Excellent

Abrasion Resistance Excellent Good Good to Excellent Poor FairCompression Set Resistance Good Fair Good to Excellent Good to Excellent Cold Flows

(Screw tightened to maximum)

(Wing nut tightened to 25 in. lb. of torque)


(Bolts tightened to 20 ft. lb. of torque)

Temperature Range

Elongation, %

(1-3" nuts tightened to 20 in. lb., 4" to 30 in. lb.)


Alkali Resistance

V

Service Ratings* (PSI)

* Service ratings are based on hydrostatic tests using standard-molded Buna-N material gaskets, with proper installation of ferrules, assembly of joints and absence of shock pressure. Contact Alfa Laval for service of other type and material gaskets, and for ratings at higher temperatures. All ratings shown are dependent upon related components within the systems and proper installation. For temperatures above 250° F, we recommend using only 13MHP clamps. This information is only valid if Alfa Laval clamps, ferrules, and gaskets are used.

Tensile Strength, psiHardness, Shore A

Original Physical Properties

Characteristic

Acid Resistance


Sanitary Tube Information

Inches Inches Inches Gal/100 ft Lbs/100 ft Lbs/100 ft 5 fps 7 fps 10 fps1/2 0.37 0.065 0.56 30.6 35.3 1.7 2.3 3.43/4 0.62 0.065 1.57 48.2 61.3 4.7 6.6 9.4

1 0.87 0.065 3.09 65.8 91.5 9.3 13 191 1/2 1.37 0.065 7.66 100.9 164.8 23 32 462 1.87 0.065 14.27 136.1 255.1 43 60 862 1/2 2.37 0.065 22.92 171.2 362.4 69 96 1383 2.87 0.065 33.6 206.4 486.7 101 141 2024 3.834 0.083 59.97 351.8 851.9 180 252 3606 5.782 0.109 136.39 694.7 1832.2 409 573 8188 7.782 0.109 247.07 930.6 2991.1 741 1038 1482

Tube OD Tube IDWall

Thickness Volume Weight DryWeight with

Water Flow (GPM) at a Mean Velocity

2.5163.0473.5794.682

0.065 / 16 ga.0.065 / 16 ga.

0.9840.9841.9841.9840.065 / 16 ga.

0.065 / 16 ga.

Basic Dimensions of Tri-Clamp®

Connections for Sanitary OD-Tubing

VI

0.065 / 16 ga.0.083 / 14 ga.

0.065 / 16 ga.0.065 / 16 ga.

1.872.372.873.87

22 1/2

0.370.620.871.37

1/23/4

34

11 1/2

OD Outer Diameter

(Inches)

ID Inner Diameter

(Inches)

Wall Thickness (Inches/Gauge)

A Ferrule Face

(Inches)

ID ODA


Schedule 5 Pipe

Size OD Inches ID Inches

1/8 0.405 0.335

1/4 0.540 0.442

3/8 0.675 0.577

1/2 0.840 0.710

3/4 1.500 0.920

1 1.315 1.185

1 1/4 1.660 1.530

1 1/2 1.900 1.770

2 2.375 2.245

2 1/2 2.875 2.790

3 3.500 3.334

3 1/2 4.000 3.834

4 4.500 4.334

5 5.563 5.345

6 6.625 6.4078 8.625 8.407

Chemical Composition %

304 316L

C 0.080 0.030

MN 2.000 2.000

P 0.045 0.045

S 0.030 0.030*

Si 1.000 1.000

Cr 18.0-20.0 16.0-18.0

Ni 8.0-13.0 10.0-14.0Mo - 2.0-3.0

* The sulfur content for 316L ASME BPE fittings is 0.005-0.017% for all weld ends.

VII

Pipe Schedule and Chemical Composition

Wall Thickness

0.035

0.049

0.049

0.065

0.065

0.065

0.065

0.065

0.065

0.083

0.109

0.109

0.083

0.083

0.083

0.109

Tri-Clamp® Fittings

Page 1


Available in finishes: 304 - #7; 316L - #7, PL and PM. See Surface Finish Codes chart on page IV.

Available in finish: 304 - #7. See Surface Finish Codes chart on page IV.



2FMP-15 Threaded Bevel Seat 90° Elbow

2CMP-31MP 90° Reducing Elbow, Non-Tapered

B2CMP 90° Elbow

DT-16

2FMP-14 Plain Bevel Seat 90° Elbow

4.59108.088.9

88.969.9

5.417.22168.3

3.72

2.192.97

25.438.150.863.576.2

101.6152.4

21/2

3

3.504.2563.521/2

25.438.1

in

50.8 x 25.4 50.8 x 38.1 63.5 x 50.8

4 x 3 3 x 21/2

3 x 2 76.2 x 63.5101.6 x 76.2

108.0130.2

in mm in mm

3.504.25

3.50

5.00

Size

in

1/2

mm

12.73/4

111/2

221/2

346

69.988.9

108.04.25

2.002.753.50

19.1

A

1.631.63

in

5.006.63

Sizes and Dimensions

mm

41.341.350.8

127.0168.3266.7


Size B

10.50

A

in mm

111/2

2

25.438.150.863.576.2

101.6

2.753.504.255.00

2.00

mm

50.8

in

127.0

2.973.724.595.41

88.9108.0

69.9

mm

55.6

in

2.1975.494.5

116.7137.3183.4


Size A B

6.634 7.22168.3

in mm mm in mm

183.4137.3116.794.575.455.62.00

2.75 69.950.8

50.8

111/2

2

in mm

34

76.2101.6


Size A

3.50

127.0

B

5.006.63

5.13

21/2 x 2 2 x 11/2

2 x 1

76.2 x 50.8

127.0

50.82.002.75

108.088.9

3.50

50.869.988.988.9

2.002.75

4.25

A

B

A

B

A

A

A

B

Page 2




Available in finish: 316L - PL and PM. See Surface Finish Codes chart on page IV.

B7MPS Short Outlet Tee

DT-27

B2KMP 45° Elbow

DT-17

B7MP Equal Tee

DT-18A


Size A

in mm in mm

3/4 19.0 1.00

11/2 38.1 1.44

1/2 12.7 1.00 25.4

25.4

1 25.4 1.13 28.6

36.5

2 50.8 1.75 44.5

21/2 63.5 2.06 52.4

3 76.2 2.38 60.3

4 101.6 3.13 79.4

6 152.4 5.25 133.4


Size A B

in mm in mm

2.25 57.2

in mm

2.38 60.31/2 12.7

3/4 19.0 2.38 60.3

2.25 57.2

2.88 73.0

1 25.4 2.63 66.7 2.63 66.7

3.38 85.7

11/2 38.1

2 50.8 3.38 85.7

2.88 73.0

21/2 63.5 3.63 92.1

4.75 120.7

3 76.2 3.88 98.4

3.63 92.1

3.88 98.4

7.13 181.0

4 101.6

6 152.4 7.13 181.0

4.75 120.7


Size A B

1 25.4 2.63

in mm in mm in

1.00 25.4

mm

57.2

1.13 28.61/2 12.7

3/4 19.0 2.38 60.3

2.25

66.7

1.63 41.3

11/2 38.1 2.88 73.0

1.13 28.6

1.38 34.9

1.88 47.6

2 50.8

21/2 63.5 3.63 92.1

3.38 85.7

3 76.2 3.88 98.4

4.63 117.5

4 101.6 4.75 120.7

2.13 54.0

2.75 69.9

6 152.4 7.13 181.0

B

A

A

B

Page 3


Available in finishes: 316L - PL and PM. See Surface Finish Codes chart on page IV.


B7RMP Reducing Tee

DT-19

B7IMPS Instrument Tee

DT-29


Size A B

in mm in mmmm in

12.7 x 38.1 1/2 x 11/2

3/4 x 11/2 19.0 x 38.1 3.00

3.00

3/4 x 2 19.0 x 50.8 3.25

1 x 2

3.00 76.2 0.88 22.2

1/2 x 2 12.7 x 50.8 3.25 82.6 1.00 25.4

82.6

1.25

76.2

1.0076.2 25.4

1.13 28.6

1.13 28.6

31.8

1 x 11/2 25.4 x 38.1

11/2 x 2 38.1 x 50.8 3.25 82.6

25.4 x 50.8 3.25 82.6

2.50

in

1.50 38.1


Size A B

in mm in mm

63.5

mm

3/4 x 1/2 19.0 x 12.7

2.63 66.7

2.50 63.5

2.63 66.7

1 x 3/4 25.4 x 19.0 2.63 66.7 2.63 66.7

1 x 1/2 25.4 x 12.7

11/2 x 1/2 38.1 x 12.7 2.88 73.0

2.88 73.0

11/2 x 3/4 38.1 x 19.0 2.88 73.0

2.88 73.0

2.88 73.0

3.13 79.4

11/2 x 1 38.1 x 25.4

2 x 1/2 50.8 x 12.7 3.38 85.7

2.88 73.0

2 x 3/4 50.8 x 19.0 3.38 85.7

3.13 79.4

2 x 1 50.8 x 25.4 3.38 85.7

3.13 79.4

3.13 79.4

3.38 85.7

2 x 11/2 50.8 x 38.1

21/2 x 1/2 63.5 x 12.7 3.63 92.1

3.38 85.7

21/2 x 3/4 63.5 x 19.0 3.63 92.1

21/2 x 1 63.5 x 25.4 3.63 92.1

3.63 92.1

3.38 85.7

3.38 85.7

3.38 85.721/2 x 11/2 63.5 x 38.1

21/2 x 2 63.5 x 50.8

4 x 2 101.6 x 50.8

3.38 85.73.63 92.1

98.43.88

3 x 1 76.2 x 25.4 3.88

3.63 92.1

3 x 1/2 76.2 x 12.7

3 x 3/4 76.2 x 19.0 3.88 98.4

3.63 92.1

98.4

3.88 98.4

3.63 92.1

3.63 92.13 x 11/2 76.2 x 38.1 3.88 98.4

3.88 98.4

3 x 2 76.2 x 50.8

3 x 21/2 76.2 x 63.5 3.88 98.4

3.88 98.4

4 x 1/2 101.6 x 12.7 4.75 120.7

4.13 104.8

4 x 3/4 101.6 x 19.0 4.75 120.7

4.13 104.8

4.13 104.8

4.13 104.8

4 x 1 101.6 x 25.4

4 x 11/2 101.6 x 38.1 4.75 120.7

4.75 120.7

4.75 120.7

4.38 111.1

4.38 111.1

4.38 111.14 x 21/2 101.6 x 63.5 4.75 120.7

4.75 120.74 x 3 101.6 x 76.2

B

A

A

B

Page 4


Available in finishes: 316L - #7, PL and PM. See Surface Finish Codes chart on page IV.

B7RMPS Short Outlet Reducing Tee

DT-20

in mm


Size A B

in mm in mm

3/4 x 1/2 19.0 x 12.7 2.50 63.5

1.13 28.6

1 x 1/2 25.4 x 12.7 2.63 66.7

1.00 25.4

1.13 28.6

1.38 34.9

1 x 3/4 25.4 x 19.0

11/2 x 1/2 38.1 x 12.7 2.88 73.0

2.63 66.7

11/2 x 3/4 38.1 x 19.0 2.88 73.0

1.63 41.3

11/2 x 1 38.1 x 25.4 2.88 73.0

1.38 34.9

1.38 34.9

1.63 41.3

2 x 1/2 50.8 x 12.7

2 x 3/4 50.8 x 19.0 3.38 85.7

3.38 85.7

2 x 1 50.8 x 25.4 3.38 85.7

1.88 47.6

2 x 11/2 50.8 x 38.1 3.38 85.7

1.63 41.3

1.63 41.3

1.88 47.6

21/2 x 1/2 63.5 x 12.7

21/2 x 3/4 63.5 x 19.0 3.63 92.1

3.63 92.1

21/2 x 1 63.5 x 25.4 3.63 92.1

1.88 47.6

21/2 x 11/2 63.5 x 38.1 3.63 92.1

1.88 47.6

1.88 47.6

2.13 54.0

21/2 x 2 63.5 x 50.8

3 x 1/2 76.2 x 12.7 3.88 98.4

3.63 92.1

3 x 3/4 76.2 x 19.0 3.88 98.4

2.13 54.0

3 x 1 76.2 x 25.4 3.88 98.4

2.13 54.0

2.13 54.0

2.13 54.0

3 x 11/2 76.2 x 38.1

3 x 2 76.2 x 50.8 3.88 98.4

3.88 98.4

3 x 21/2 76.2 x 63.5 3.88 98.4

2.63 66.7

4 x 1/2 101.6 x 12.7 4.75 120.7

2.13 54.0

2.63 66.7

2.63 66.7

4 x 3/4 101.6 x 19.0

4 x 1 101.6 x 25.4 4.75 120.7

4.75 120.7

4 x 11/2 101.6 x 38.1 4.75 120.7

2.63 66.7

4 x 2 101.6 x 50.8 4.75 120.7

2.63 66.7

2.63 66.7

2.63 66.7

4 x 21/2 101.6 x 63.5

4 x 3 101.6 x 76.2 4.75 120.7

4.75 120.7

6 x 1/2 152.4 x 12.7 7.13 181.0

3.75 95.3

6 x 3/4 152.4 x 19.0 7.13 181.0

3.75 95.3

3.75 95.3

3.75 95.3

6 x 1 152.4 x 25.4

6 x 11/2 152.4 x 38.1 7.13 181.0

7.13 181.0

6 x 2 152.4 x 50.8 7.13 181.0

3.75 95.3

6 x 21/2 152.4 x 63.5 7.13 181.0

3.75 95.3

3.75 95.3

3.75 95.3

6 x 3 152.4 x 76.2

6 x 4 152.4 x 101.6 7.13 181.0

7.13 181.0

A

B

Page 5



Available in finishes: 304 - #7; 316L - #7. See Surface Finish Codes chart on page IV.

Available in finishs: 304 - #1, #7; 316L - #1, #7, PL and PM. See Surface Finish Codes chart on page IV.


Size A

in mm in mm

DT-18B

21/2 63.5 3.63

4 101.6 4.75

1/2 12.7 2.25 57.2

60.5

1 25.4 2.63 66.83/4 19.0 2.38

73.2

2 50.8 3.38 85.9

11/2 38.1 2.88

92.2

3 76.2 3.88 98.6

120.7


Size A

in mm in mm

4 101.6 1.13

11/2 38.1 1.13

1 25.4 1.13 28.6

28.6

2 50.8 1.13 28.6

28.6

3 76.2 1.13 28.6

21/2 63.5 1.13

28.6


ModelSize A

in mm in mm

10 254.0

14WMPS 1/2 12.7 0.50 12.7

0.50 12.7

1 25.4 0.50 12.73/4 19.0

0.50 12.7

2 50.8 0.50 12.7

11/2 38.1

12.7

3 76.2 0.50 12.7

21/2 63.5 0.50

15.9

6 152.4 0.75 19.0

4 101.6 0.63

38.114WMO 8 203.2 1.50 38.1

6 152.4 1.50

12 304.8 1.75

38.1

44.5

1.50

B9MP Equal Cross

L14AM Long Weld Ferrule

14WMPS / 14WMO Short Weld Ferrule

A

A

A

A

Page 6



Available in finishes: 304 - #1, #7; 316L - #1 and #7. See Surface Finish Codes chart on page IV.


14RMP Ferrule for Expanding (Recessless)


Size A

in mm in mm

44.5

1 25.4 1.753/4 19.0 1.75

44.5

1/2 12.7 1.75 44.5

44.5

2 50.8 2.25 57.2

1.7511/2 38.1

2.25 57.2

3 76.2 2.25 57.2

21/2 63.5

2.25 57.2

6 152.4 3.00 76.2

4 101.6


ModelSize A

in mm in mm

14WLMP 1 25.4 3.00 76.2

76.2

2 50.8 3.00 76.2

3.0011/2 38.1

3.00 76.2

101.63 76.2 4.00

21/2 63.5

101.614WLMO 6 152.4 6.00 152.4

4 101.6 4.00

152.4

10 254.0 6.00 152.4

8 203.2 6.00

152.412 304.8 6.00

in mm in

1.00

mm in


Size A B

25.4

mm

1 25.4

1.13 28.6

0.75 19.1

1.50 38.1

2 50.8 1.31 33.3 2.00 50.8

11/2 38.1

21/2 63.5 1.38 34.9

4.00 101.6

3 76.2 1.44 36.5

2.50 63.5

3.00 76.2

4 101.6 1.50 38.1

BS14AM Automatic Weld Ferrule

DT-22

14WLMP/14WLMO Light Tank Weld Ferrule

A

A

B

A

Page 7


in mm

1 25.411/2 38.1

2 50.821/2 63.5

3 76.2

4 101.6


Available in 304.

Available in 304.

13MHLA Light Duty Adjustable Tri-Clamp

A13MO Light Duty Tri-Clamp with T-Bolt

14MPW Tank Weld Ferrule

1.63


Size A B C

in mm in

1.16

in mmmm

29.4

1.63 41.3 1.38 34.9 1.67 42.5

41.3 0.88 22.2

1.75 44.5 1.88 47.6

3.22 81.8

1.75 44.5 2.38 60.3

2.19 55.6

2.70 68.7

4.25 108.0

1.81 46.0

2.13 54.0 3.83 97.2

2.88 73.0


Size A

in mm in mm

2 50.8 2.61

3 76.2 3.67

11/2 38.1 2.14 54.4

66.3

21/2 63.5 3.14 79.8

93.3

4 101.6 4.78 121.4


Size A

in mm in mm

2 50.8 2.61

3 76.2 3.67

11/2 38.1 2.08 52.8

66.3

21/2 63.5 3.14 79.8

93.3

4 101.6 4.78 121.4

6 152.4 6.69 169.9

8 203.2 8.69 220.7

10 254.0 10.69 271.5

12 304.8 12.69 322.3

A

B C

A

A

Page 8


** Also available with bronze or stainless steel hex nut.

Available in 304.

Available in 304.

Available in 304.

A13MHM Single Hinge Heavy Duty Tri-Clamp with Wing Nut

13MW Medium Duty Tri-Clamp with Wing Nut

13MHHM ** Double Hinge Heavy Duty Tri-Clamp with Wing Nut


Size A

in mm in mm

2 50.8 2.66

3 76.2 3.72

11/2 38.1 2.13 54.0

67.5

21/2 63.5 3.19 81.0

94.5

4 101.6 4.83 122.6

6 152.4 6.69 169.9

8 203.2 8.69 220.7

Size


A

in mm in mm

11/2 38.1 2.13 54.0

67.1

21/2 63.5 3.19 81.0

2.6450.82

94.5

4 101.6 4.81 122.2

3.7276.23

6 152.4 6.69 169.9


11/2 38.1 2.06 52.3

in mm

2 50.8 2.56

A

in mm

65.0

3 76.2 3.66

21/2

101.6 4.75 120.7

63.5 3.12 79.2

93.0

Size

4

A

Page 9


** Also available with hex nut.

Available in 304.

Available in 304.

Available in 304.

Available in 304.

A12MPS Swivel Joint

13MHHS / A13MHHS** Fractional Tri-Clamp with Wing Nut

13MHHS / A13MHHS 3-Segment Heavy Duty Tri-Clamp with Wing Nut

13MHP / A13MHP High Pressure Tri-Clamp


Size A

in mm

3/4 19.0 1.13 28.6

in mm in mm

11/2 38.1 2.13 54.0

67.5

21/2 63.5 3.19 81.0

2 50.8 2.66

94.5

4 101.6 4.83 122.6

3 76.2 3.72

mm


Size A

in mm

2 50.8 2.58

3 76.2 3.64

11/2 38.1 2.05 52.0

65.5

21/2 63.5 3.11 79.0

92.5

4 101.6 4.73 120.3

6 152.4 6.63 168.4

in mm in mm

11/2 38.1 1.98 50.4

63.9

21/2 63.5 3.05 77.4

2 50.8 2.52

in mm

ASize


in

101.6

3 76.2


Size A

90.9

4 4.69 119.1

3.58

A

A

A

A

Page 10


Available in E, G, SFY, U and X. See gasket material chart on page V

Available in E, G, N, SFY, SFYW, U, UW and X. See gasket material chart on page V

Available in E, SFY, U, UW and X. See gasket material chart on page V

Available in E and SFY. See gasket material chart on page V

40MPF / 40MOF Flanged Gasket

40MHP High Pressure Gasket

42MP Fractional Gasket

40MP / 40MOGasket

Size

in mm

1/2 12.7

3/4 19.0

ModelSize

in mm

40MP 1 25.4

11/2 38.1

2 50.8

21/2 63.5

3 76.2

4 101.640MO 6 152.4

8 203.2

10 254.0

12 304.8

ModelSize

in mm

11/2 38.1

40MPF 1 25.4

2 50.8

21/2 63.5

76.2

4 101.6

152.4

8 203.2

Size

10 254.0

12 304.8

in mm

40MOF 6

3

1 25.40

Page 11


Available in GR. See gasket material chart on page V

U

Available in U. See gasket material chart on page V

Available in E, SFY, U. See gasket material chart on page V

* Orifice Plate is delivered with a 1/8" pilot hole.

in mm

3/4 19.011/2 38.1

2 50.821/2 63.5

3 76.2

4 101.6

6 152.4

8 203.2

10 254.0

12 304.8

Available in finishes: 304 - #1, #7; 316L - #1, #7, PL and PM. See Surface Finish Codes chart on page IV.

A80MP Orifice Plate - 316L

16AMP / 16AMO Solid End Cap

A40MP-GR/A40MO-GR Teflon Envelope Gasket

40MPS 10-Mesh Screen Gasket

ModelSize

in mm

A40MP 1 25.4

11/2 38.1

2 50.8

21/2 63.5

3 76.2

4 101.6A40MO 6 152.4

Size

in mm

11/2 38.1

2 50.8

21/2 63.5

3 76.2

4 101.6

63.5

3 76.2

Size

in mm

11/2 38.1

2 50.8

21/2

ModelSize

Dimensions

A B

in mm in mm

0.25 6.4

24.9

1.98 50.4

63.9

3.05 77.4

16AMP 0.19 4.8 0.98

0.25 6.4 2.52

0.25 6.4 3.58

0.25 6.4

90.9

119.1

0.44 11.1 6.58 167.1

0.25 6.4 4.69

162.4

0.44 11.1 8.58 217.9

16AMO 0.44 11.1 6.39

319.50.56 14.3 12.58

A

B

Page 12



in mm

1 25.411/2 38.1

2 50.821/2 63.5

3 76.2

4 101.6

Available in finishes: 304 - #7; 316L. See Surface Finish Codes chart on page IV.

14MPHR Rubber Hose Adapter

14MPHT Tygon Hose Adapter

SizeDimensions

A

in mm in mm

1/2 x 3/8 12.7 x 9.7 1.50

3/4 x 1/4 19.0 x 6.4 1.50

1/2 x 1/4 12.7 x 6.4 1.50 38.1

38.1

1/2 x 1/2 12.7 x 12.7 1.50 38.1

38.1

3/4 x 3/8 19.0 x 9.7 1.50 38.1

3/4 x 1/2 19.0 x 12.7 1.50 38.1

3/4 x 3/4 19.0 x 19.0 1.50 38.1

1 x 1 25.4 x 25.4 1.69 42.9

11/2 x 11/2 38.1 x 38.1 1.69 42.9

2 x 2 50.8 x 50.8 2.31 58.7

21/2 x 21/2 63.5 x 63.5 2.00 50.8

3 x 3 76.2 x 76.2 3.11 79.0

4 x 4 101.6 x 101.6 3.41 86.5

4.50


Size A B C

in mm in

1.00

in mmmm

25.4

4.50 114.3 1.38 34.9 1.50 38.1

114.3 0.88 22.2

4.50 114.3 1.88 47.6

3.00 76.2

4.50 114.3 2.38 60.3

2.00 50.8

2.50 63.5

4.00 101.6

4.50 114.3

4.63 117.5 3.83 97.2

2.88 73.0

A

Page 13


Available in 304.

Available in finish: 304 #7. See Surface Finish Codes chart on page IV.

Available in finish: 304 #7. See Surface Finish Codes chart on page IV.

17MP-15 Threaded Bevel Seat Adapter

A14MHC Sanitary Hose Clamp for Tygon Hose Adapter

17MP-14 Plain Bevel Seat Adapter

Sizes

Hose OD

in mm

1.125 28.6

1.250 31.8

1.375 34.9

1.500 38.1

1.750 44.5

1.875 47.6

2.000 50.8

2.125 54.0

2.250 57.2

2.375 60.3

2.500 63.5

2.625 66.7

2.750 69.9

3.000 76.2

3.250 82.6

3.500 88.9

3.750 95.3

4.000 101.6

4.250 108.0

4.500 114.3

5.000 127.0


Size A

in mm in mm

11/2 38.1 3.00

21/2 63.5 3.50

1 25.4 3.00 76.2

76.2

2 50.8 3.00 76.2

88.9

3 76.2 3.75 95.3

4 101.6 4.00 101.6


Size A

in mm in mm

11/2 38.1 1.72

21/2 63.5 1.84

1 25.4 1.69 42.9

43.7

2 50.8 1.72 43.7

46.8

3 76.2 1.91 48.4

4 101.6 2.34 59.5

A

A

Page 14



21MP Male NPT Adapter in mm


Size A B

in mm in mm

1/2 x 1/8 12.7 x 3.2 2.00 50.8

0.60 15.2

0.40 10.2

0.59 15.01/2 x 1/4 12.7 x 6.4 2.00 50.8

0.78 19.8

1/2 x 3/8 12.7 x 9.5

1/2 x 1/2 12.7 x 12.7 2.00 50.8

2.00 50.8

1/2 x 3/4 12.7 x 19.0 2.00 50.8

0.59 15.0

3/4 x 1/8 19.0 x 3.2 2.00 50.8

0.79 20.1

0.40 10.2

0.60 15.2

3/4 x 1/4 19.0 x 6.4

3/4 x 3/8 19.0 x 9.5 2.00 50.8

2.00 50.8

3/4 x 1/2 19.0 x 12.7 2.00 50.8

0.98 25.0

3/4 x 3/4 19.0 x 19.0 2.00 50.8

0.78 19.8

0.79 20.1

0.69 17.5

1 x 3/4 25.4 x 19.0

1 x 1 25.4 x 25.4 2.25 57.2

2.19 55.6

11/2 x 11/4 38.1 x 31.8 2.44 61.9

0.55 13.9

11/2 x 11/2 38.1 x 38.1 2.44 61.9

0.70 17.9

0.72 18.3

0.72 18.3

11/2 x 3/4 38.1 x 19.0

11/2 x 1 38.1 x 25.4 2.31 58.7

2.19 55.6

11/2 x 2 38.1 x 50.8 2.63 66.7

0.75 19.1

2 x 11/2 50.8 x 38.1 2.47 62.7

0.72 18.3

0.75 19.1

1.14 29.0

2 x 2 50.8 x 50.8

21/2 x 2 63.5 x 50.8 3.13 79.4

2.66 67.5

21/2 x 21/2 63.5 x 63.5 3.28 83.3

1.30 32.9

3 x 3 76.2 x 76.2 3.50 88.9

1.38 34.9

1.20 30.6

4 x 4 101.6 x 101.6 3.81 96.8

A

B

Page 15




22MP Female NPT Adapter

23BMP Thermometer Cap


Size A

in mm in mm

1/2 x 1/4 12.7 x 6.4 1.50

1/2 x 1/2 12.7 x 12.7 1.50

1/2 x 1/8 12.7 x 3.2 1.25 31.8

38.1

1/2 x 3/8 12.7 x 9.5 1.50 38.1

38.1

1/2 x 3/4 12.7 x 19.0 1.62 41.1

3/4 x 1/8 19.0 x 3.2 1.25 31.8

3/4 x 1/4 19.0 x 6.4 1.50 38.1

3/4 x 3/8 19.0 x 9.5 1.50 38.1

3/4 x 1/2 19.0 x 12.7 1.50 38.1

3/4 x 3/4 19.0 x 19.0 1.62 41.1

1 x 3/4 25.4 x 19.0 1.63 41.3

1 x 1 25.4 x 25.4 1.63 41.3

11/2 x 11/4 38.1 x 31.8 2.25 57.2

11/2 x 11/2 38.1 x 38.1 2.25 57.2

11/2 x 3/4 38.1 x 19.0 1.63 41.3

11/2 x 1 38.1 x 25.4 1.63 41.3

2 x 11/2 50.8 x 38.1 1.69 42.9

2 x 2 50.8 x 50.8 2.34 59.5

21/2 x 11/2 63.5 x 38.1 1.69 42.9

21/2 x 2 63.5 x 50.8 1.41 35.7

21/2 x 21/2 63.5 x 63.5 2.09 53.2

3 x 3 76.2 x 76.2 2.19 55.6

4 x 4 101.6 x 101.6 2.66 67.5


Size A B

in mm in mm in mm

No

Tap

ped

Ho

le

1 & 11/2 38.1

2 50.8

21/2 63.5

1.98 50.4 0.63 15.9

2.52 63.9 0.63 15.9

3.05 77.4 0.63 15.9

3 76.2 3.58 90.9

4 101.6 4.69 119.1

25.4 x 12.7 1.98 0.63 15.9

3.58

0.63 15.9

0.63 15.9

3.05 77.5

0.63 15.91.98

1 x 1/2

64.0 0.63 15.92 x 3/4 50.8 x 19.0 2.52

50.3

11/2 x 3/4 38.1 x 19.0 50.3

0.63 15.9

90.9 0.63 15.9

0.63 15.9

3 x 3/4

4 x 3/4 101.6 x 19.0 4.69 119.1

76.2 x 19.0

Tap

ped

wit

h N

PT

T

hre

ads

21/2 x 3/4 63.5 x 19.0

A

B

A

Page 16




DT-21

B32-14MP Eccentric Reducer

DT-21

B31-14MP Concentric Reducer


Size A

in mm in mm

1 x 1/2 25.4 x 12.7 2.50

11/2 x 1/2 38.1 x 12.7 3.50

3/4 x 1/2 19.0 x 12.7 2.00 50.8

63.5

1 x 3/4 25.4 x 19.0 2.00 50.8

88.9

11/2 x 3/4 38.1 x 19.0 3.00 76.2

11/2 x 1 38.1 x 25.4 3.00 76.2

2 x 3/4 50.8 x 19.0 5.00 127.0

2 x 1 50.8 x 25.4 5.00 127.0

2 x 11/2 50.8 x 38.1 3.00 76.2

21/2 x 11/2 63.5 x 38.1 5.00 127.0

21/2 x 2 63.5 x 50.8 3.00 76.2

3 x 11/2 76.2 x 38.1 7.00 177.8

3 x 2 76.2 x 50.8 5.00 127.0

3 x 21/2 76.2 x 63.5 3.00 76.2

4 x 2 101.6 x 50.8 9.13 231.8

4 x 21/2 101.6 x 63.5 9.13 231.8

4 x 3 101.6 x 76.2 5.13 130.2

6 x 3 152.4 x 76.2 7.50 190.5

6 x 4 152.4 x 101.6 7.63 193.7

Size A

in mm in mm

1 x 1/2 25.4 x 19.0 2.50

11/2 x 1/2 38.1 x 19.0 3.50

3/4 x 1/2 19.0 x 12.7 2.00 50.8

1 x 3/4 25.4 x 12.7 2.00 50.8

11/2 x 3/4 38.1 x 12.7 3.00 76.2

11/2 x 1 38.1 x 25.4 3.00 76.2

2 x 1 50.8 x 25.4 5.00 127.0

2 x 11/2 50.8 x 38.1 3.00 76.2

21/2 x 11/2 63.5 x 38.1 5.00 127.0

21/2 x 2 63.5 x 50.8 3.00 76.2

3 x 11/2 76.2 x 38.1 7.00 177.8

3 x 2 76.2 x 50.8 5.00 127.0

3 x 21/2 76.2 x 63.5 3.00 76.2

4 x 2 101.6 x 50.8 9.13 231.8

6 x 4 152.4 x 101.6

130.2

181.04 x 21/2 101.6 x 63.5 7.13

4 x 3 101.6 x 76.2 5.13

6 x 3 152.4 x 76.2

88.9

63.5


193.7

190.57.50

7.63

A

A

Page 17

Tri-Weld® Fittings

Page 18

Tri-Weld® Fittings

Available in finishes: 304 - #1, #7; 316L - #1, #3, #7, PC, PL, PD and PM. See Surface Finish Codes chart on page IV.

Available in finishes: 304 - #1, #7; 316L - #1, #3 and #7. See Surface Finish Codes chart on page IV.

Available in finishes: 304 - #1, #7; 316L - #1 and #7. See Surface Finish Codes chart on page IV.


211/2

1

43

21/2

50.838.125.4

101.676.263.5

4.062.942.06

8.316.315.19

103.274.652.4

211.1160.3131.8 5.69

6.818.94

2.563.444.56

in mm

227.0173.0144.5115.987.365.1


L2CM Bend 90°, Tri-Clamp

Size A B

in mm in mm

95.376.257.238.1

228.6152.4114.3

1.502.253.003.754.506.009.00

63.576.2

101.6152.4

25.438.150.8

346

111/2

221/2


2WCL Bend 90°, No Tangent in

Size A

mm mmin

103.274.652.4

211.1160.3131.85.19

6.318.31

2.062.944.06

4

25.438.150.863.576.2

101.6

11/2

221/2

3

L2S Bend 90°

Size A

in mm in mm

1

76.276.2


139.7120.795.376.2

292.1203.2158.86.25

8.0011.50

3.003.754.755.50

3.003.00

38.125.419

12.7

101.676.263.550.8

6 152.4

221/2

34

1/2

3/4

111/2

B2S Bend 90°, Automatic Tri-Weld

Size A

DT-7

in mm in mm

A

A

A

A

A

B

A

Page 19

Tri-Weld® Fittings


Available in finishes: 304 - #7. See Surface Finish Codes chart on page IV.

Available in finishes: 304 - #7. See Surface Finish Codes chart on page IV.

121.492.969.9

242.1183.4153.26.0

7.29.5

2.83.74.8103.2

74.652.4

211.1160.3131.85.19

6.318.31

2.062.944.06

63.576.2

101.6

25.438.150.8

mm

111/2

221/2

34


L2F Bend 90°, Plain Bevel Seat

Size A B

in mm in mm in

153.2183.4242.1

69.992.9

121.44.83.72.8

9.57.26.0131.8

160.3211.1

52.474.6

103.25.196.318.31

2.062.944.06

4

25.438.150.863.576.2

101.6

mm in mm

111/2

221/2

3

168.3


L2C Bend 90°, Threaded Bevel Seat

Size A B

in mm in

6.63

41.341.350.869.988.9

108.0127.0

2.753.504.255.00

1.631.632.0076.2

76.276.2

158.8139.7120.795.3

8.00 203.2

3.754.755.506.25

3.003.003.00

A B

in mm in mm

101.6

in

Size

mm

38.150.863.576.2

12.719.025.4

21/2

111/2

2

34


B2CMW Bend 90°, Tri-Clamp x Automatic Tri-Weld

DT-12

1/2

3/4

A

B

A

B

A

B

Page 20

Tri-Weld® Fittings



Available in finishes: 316L - #1 and #7. See Surface Finish Codes chart on page IV.

39.747.663.595.3

15.923.831.8

0.630.941.251.561.882.503.75

63.576.2

101.6152.4

25.438.150.8

111/2

221/2

346

2WK Bend 45°, No Tangent

Size A

in mm in mm

79.4


2.33.1114.3

3.634.50

25.425.428.636.544.552.4

92.1

1.41.82.1

60.3

1.01.01.1

57.257.257.263.5

85.776.2

2.252.503.003.38

3

11/2

221/2

4

25.438.150.863.576.2

101.6

1

B

in mm

3/4

12.719

2.252.25

B2KMW Bend 45°, Tri-Clamp x Automatic Tri-Weld

DT-13

Size A

in mm in mm

1/2

114.3158.8


6.25152.44.50

63.576.285.792.1

57.257.257.2

2.252.252.252.503.003.383.63

6

12.719.025.438.150.863.576.2

101.6

221/2

34

1/2

3/4

111/2

B2KS Bend 45°, Automatic Tri-Weld

DT-8

Size


A

in mm in mm

A

A

45°

B

A

45°

Page 21

Tri-Weld® Fittings


in mm in mm in mm

3.75 95.3 4.50 114.3 5.00 127.03.75 95.3 4.50 114.3 5.00 127.04.50 114.3 6.00 152.4 6.00 152.44.50 114.3 6.00 152.4 6.00 152.44.50 114.3 6.00 152.4 6.13 155.65.00 127.0 6.00 152.4 6.75 171.55.00 127.0 6.00 152.4 6.75 171.55.00 127.0 6.00 152.4 7.00 177.85.00 127.0 6.00 152.4 6.75 171.55.75 146.1 7.50 190.5 7.75 196.95.75 146.1 7.50 190.5 7.75 196.95.75 146.1 7.50 190.5 7.94 201.65.75 146.1 7.50 190.5 7.75 196.95.75 146.1 7.50 190.5 8.13 206.46.50 165.1 9.00 228.6 8.75 222.36.50 165.1 9.00 228.6 8.75 222.36.50 165.1 9.00 228.6 9.00 228.66.50 165.1 9.00 228.6 8.81 223.86.50 165.1 9.00 228.6 8.75 222.36.50 165.1 9.00 228.6 9.13 231.88.50 215.9 12.00 304.8 11.25 285.88.50 215.9 12.00 304.8 11.25 285.88.50 215.9 12.00 304.8 11.56 293.78.50 215.9 12.00 304.8 11.44 290.58.50 215.9 12.00 304.8 11.25 285.88.50 215.9 12.00 304.8 11.63 295.38.50 215.9 12.00 304.8 11.63 295.3


4 x 3

4 x 14 x 11/2

4 x 24 x 21/2

3 x 23 x 21/2

4 x 1/2

4 x 3/4

3 x 1/2

3 x 3/4

3 x 13 x 11/2

21/2 x 3/4

21/2 x 121/2 x 11/2

21/2 x 2

2 x 3/4

2 x 12 x 11/2

21/2 x 1/2

11/2 x 1/2

11/2 x 3/4

11/2 x 12 x 1/2

1 x 1/2

1 x 3/4

38.1 x 19.038.1 x 12.725.4 x 19.025.4 x 12.7

50.8 x 25.450.8 x 19.050.8 x 12.738.1 x 25.4

63.5 x 25.463.5 x 19.063.5 x 12.750.8 x 38.1

76.2 x 19.076.2 x 12.763.5 x 50.863.5 x 38.1

76.2 x 63.576.2 x 50.876.2 x 38.176.2 x 25.4

DT-23101.6 x 76.2101.6 x 63.5101.6 x 50.8101.6 x 38.1101.6 x 25.4101.6 x 19.0101.6 x 12.7

2WUL Bend 180°, No Tangent


Size A B CB2UMPBOA Bottom Outlet Use-Point Fitting in mm

21/2

34

111/2

2 50.838.125.4

101.676.263.5

3.002.251.50

6.004.503.75

76.257.238.1

152.4114.395.3

in mm in mm


ASize

B

CA

Page 22

Tri-Weld® Fittings

D

in mm in mm in mm in mm

3.75 95.3 4.50 114.3 3.88 98.4 1.25 31.84.50 114.3 6.00 152.4 4.88 123.8 1.75 44.54.50 114.3 6.00 152.4 4.75 120.7 1.75 44.55.00 127.0 6.00 152.4 5.63 142.9 1.75 44.55.00 127.0 6.00 152.4 5.50 139.7 1.75 44.55.00 127.0 6.00 152.4 5.25 133.4 1.75 44.55.75 146.1 7.50 190.5 6.50 165.1 1.75 44.55.75 146.1 7.50 190.5 6.25 158.8 1.75 44.55.75 146.1 7.50 190.5 6.00 152.4 2.25 57.26.50 165.1 9.00 228.6 7.50 190.5 2.25 57.26.50 165.1 9.00 228.6 7.25 184.2 2.25 57.26.50 165.1 9.00 228.6 7.00 177.8 2.25 57.26.50 165.1 9.00 228.6 6.75 171.5 2.25 57.28.50 215.9 12.00 304.8 10.00 254.0 - -8.50 215.9 12.00 304.8 9.75 247.7 - -8.50 215.9 12.00 304.8 9.50 241.3 - -8.50 215.9 12.00 304.8 9.25 235.0 - -8.50 215.9 12.00 304.8 9.00 228.6 - -




63.560.3

92.185.773.066.7

3.884.75 120.7

98.4

2.632.883.383.63

50.847.6 2.38

2.50

79.473.060.354.0

104.885.7

1.882.002.132.382.883.133.384.13

12.719.025.438.150.863.576.2

101.6

1/2

3/4

111/2

221/2

34

B7WWM Tri-Clamp Outlet Equal Tee

Size A B

in mm in mm in mm

104.8142.9


104.8142.9

101.6152.4

60.373.079.485.7

47.650.854.0

3.38

5.634.13

2.132.382.883.13

50.847.6 1.88

2.00

79.473.060.354.0

85.73.384.135.63

1.882.002.132.382.883.13

25.438.150.8

76.263.5

12.719.0

11/2

13/4

1/2

DT-9A

B

in mm

643

21/2

2

mm


A

in mm

50.8 x 19.038.1 x 25.438.1 x 19.0

B7WWW Equal Tee

Size

in mm

25.4 x 19.0

63.5 x 38.163.5 x 25.450.8 x 38.150.8 x 25.4

76.2 x 50.8

76.2 x 25.4 76.2 x 38.1

63.5 x 50.8

101.6 x 50.8101.6 x 38.1101.6 x 25.4 76.2 x 63.5

101.6 x 76.2101.6 x 63.5

4 x 11/2

4 x 24 x 21/2

4 x 3

3 x 11/2

3 x 23 x 21/2

4 x 1

21/2 x 121/2 x 11/2

3 x 121/2 x 2

in

B2UMPSOA Side Outlet Use-Point Fitting

DT-23

1 x 3/4

11/2 x 3/4

11/2 x 12 x 3/4

2 x 12 x 11/2


Size A B C

C

D

A

B

B

A

A

B

Page 23

Tri-Weld® Fittings



in mm

1/2 12.7

3/4 19.0

1 25.411/2 38.1

2 50.821/2 63.5

3 76.2

4 101.6


69.92.75

22.2

25.4

28.6

34.9

41.3

47.6

54.0

1.38

1.63

1.88

2.13

0.88

1.00

1.1354.0

50.8

47.6

85.7

79.4

73.0

60.3

4.13 104.8

2.38

2.88

3.13

3.38

1.88

2.00

2.1354.0

50.8

47.6

85.7

79.4

73.0

60.3

4.13 104.8

2.38

2.88

3.13

3.38

1.88

2.00

2.13

in mm

C

in mm

38.1

B7WMSW Tri-Clamp x Tri-Weld Equal Tee

DT-25


Size A

in mm

B

1.25

1.50

22.2

25.4

25.4

28.6

28.6

31.8

1.00

1.00

1.13

1.13

63.5 0.88

63.5

63.5

69.9

69.9

69.9

69.9

38.1 x 50.8

2.50

2.75

2.50

2.75

2.75

2.50

2.75

1 x 2

11/2 x 2

12.7 x 38.1

12.7 x 50.8

19.0 x 38.1

19.0 x 50.8

25.4 x 38.1

25.4 x 50.8

3/4 x 11/2

1/2 x 2

3/4 x 2

1 x 11/2

B

in mm


B7IWWMS Instrument Tee

DT-28

Size A

in mm in mm

1/2 x 11/2

69.995.3

2.753.75

25.428.628.634.941.347.654.0

1.381.631.882.13

1.001.131.13

85.7104.8142.9

4.135.63

47.650.854.060.373.079.4

2.382.883.133.38

1.882.002.13

6

63.5

101.6152.4

76.2


21/2

34

19.012.7

25.438.150.8

DT-15

mm in mm

1/2

3/4

111/2

2

B7WWMS Tri-Clamp Short Outlet Equal Tee

Size A B

in mm in

B

A

A

B

CA

B

Page 24

Tri-Weld® Fittings


130.2

130.2

130.2

130.2

130.2

130.2

130.2

130.2

5.13

5.13

92.1

92.1

92.1

92.1

98.4

98.4

98.4

5.13

5.13

5.13

5.13

142.9

142.9

3.63

3.63

3.88

3.88

5.13

3.88

5.13

142.9

142.9

142.9

142.9

5.63

5.63

104.8

104.8

104.8

104.8

104.8

104.8

104.8

5.63

5.63

5.63

5.63

152.4 x 76.2

152.4 x 101.6

4.13

4.13

4.13

4.13

4.13

5.63

5.63

152.4 x 25.4

152.4 x 38.1

152.4 x 50.8

152.4 x 63.5

6 x 3

6 x 4

101.6 x 12.7

101.6 x 19.0

101.6 x 25.4

101.6 x 38.1

101.6 x 50.8

101.6 x 63.5

101.6 x 76.2

6 x 1

6 x 11/2

6 x 2

6 x 21/2

3.63

3.63

6 x 1/2

6 x 3/4

152.4 x 12.7

152.4 x 19.0

142.9

142.9

4 x 3

4 x 1/2

4 x 3/4

4.13

4.13

50.8

60.3

73.0

73.0

73.0

66.7

66.7

60.3

60.3

54.0

54.0

66.7

79.4

73.0

73.0

66.7

3.13

3.13

3.13

79.4

2.88

2.88

2.88

3.13

2.63

79.4

79.4

79.4

79.4

2.63

2.88

2.88

2.38

2.38

2.63

2.63

2.00

2.13

2.13

2.38

85.7

85.7

85.7

85.7

79.4

79.4

85.7

79.4

73.0

73.0

79.4

79.4

60.3

60.3

73.0

73.0

50.8

54.0

54.0

60.3

3.38

3.38 85.7

3.13

3.13

4 x 1

4 x 11/2

4 x 2

4 x 21/2

3.38

3.38

3.38

3.38

3.13

3.13

3.13

3.13

2.88

2.88

2.88

3.13

76.2 x 50.8

76.2 x 63.5

2.00

2.13

2.13

2.38

2.38

2.38

2.88

76.2 x 12.7

76.2 x 19.0

76.2 x 25.4

76.2 x 38.1

63.5 x 19.0

63.5 x 25.4

63.5 x 38.1

63.5 x 50.8

50.8 x 19.0

50.8 x 25.4

50.8 x 38.1

63.5 x 12.7

3 x 2

3 x 21/2

19.0 x 12.7

25.4 x 12.7

25.4 x 19.0

38.1 x 12.7

38.1 x 19.0

38.1 x 25.4

50.8 x 12.7

21/2 x 2

3 x 1/2

3 x 3/4

3 x 11/2

3 x 1

21/2 x 1/2

21/2 x 3/4

21/2 x 1

21/2 x 11/2

2 x 3/4

2 x 1/2

2 x 11/2

2 x 1

in in mm


B7RWWW (1 of 2) Reducing Tee

Size A B

in mm mm

DT-10

3/4 x 1/2

1 x 1/2

1 x 3/4

11/2 x 1/2

11/2 x 3/4

11/2 x 1

B

A

Page 25

Tri-Weld® Fittings


66.7

66.7

63.5

79.4

73.0

73.0

73.0

85.7

79.4

79.4

79.4

92.1

92.1

85.7

85.7

111.1

104.8

104.8

92.1

92.1

4.38

4.38 111.1

111.1

3.63

4.13

4.13

4.38

3.38

3.63

3.63

3.63

3.13

3.13

3.38

3.38

2.88

2.88

3.13

3.13

2.50

2.63

2.63

2.88

4.13 104.8

4.13 104.8

4.13 104.8

4.13 104.8

4.13 104.8

3.38 85.7

3.38 85.7

3.38 85.7

3.38 85.7

3.13 79.4

3.13 79.4

2.88 73.0

3.13 79.4

2.88 73.0

2.88 73.0

60.3

2.38 60.3

2.88 73.0

2.00 50.8

2.13 54.0

2.13 54.0

2.38 60.3

2.38

76.2 x 63.5

101.6 x 50.8

101.6 x 63.5

101.6 x 76.2

101.6 x 38.1

101.6 x 25.4

63.5 x 50.8

76.2 x 50.8

76.2 x 38.1

76.2 x 25.4

50.8 x 25.4

50.8 x 38.1

63.5 x 25.4

63.5 x 38.1

38.1 x 19.0

38.1 x 25.4

50.8 x 12.7

50.8 x 19.0

19.0 x 12.7

25.4 x 12.7

25.4 x 19.0

38.1 x 12.7

4 x 2

4 x 21/2

4 x 3

3 x 2

3 x 21/2

4 x 1

4 x 11/2

21/2 x 11/2

3 x 1

21/2 x 2

3 x 11/2

2 x 3/4

2 x 1

2 x 11/2

21/2 x 1

3/4 x 1/2

1 x 1/2

1 x 3/4

11/2 x 1/2

11/2 x 1

11/2 x 3/4

2 x 1/2

mm

Size B7RWWM Tri-Clamp outlet Reducing Tee


in mm in in mm

BA

A

B

Page 26

Tri-Weld® Fittings

63.5 x 12.7

63.5 x 25.4

76.2 x 63.5


1.13

1.38

1.38

1.38

28.6

25.41.00

1.13

34.9

34.9

34.9

28.6

1.63

1.63

1.63

1.63 41.3

41.3

41.3

41.3

1.88

47.6

47.6

47.6

47.6

47.6

1.88

1.88

1.88

1.88

2.13

54.0

54.0

54.0

54.0

54.0

2.13

2.13

2.13

2.13

66.7

66.7

54.0

2.63

2.13

66.7

66.7

66.7

66.7

95.3

95.3

95.3

66.7

95.3

95.3

95.3

95.3

95.3

2.63

2.63

2.63

2.63

3.75

3.75

3.75

2.63

2.63

3.75

3.75

3.75

3.75

142.9 3.75

142.9

142.9

142.9

142.9

104.8

104.8

142.9

142.9

142.9

104.8

104.8

104.8

104.8

85.7

85.7

85.7

104.8

79.4

85.7

85.7

85.7

79.4

79.4

79.4

79.4

73.0

73.0

73.0

73.0

54.0

60.3

60.3

60.3

2.13

50.8

54.0

2.38

2.38

2.38

2.13

2.88

2.88

2.88

2.88

3.13

3.13

3.13

3.13

3.38

3.38

3.38

3.13

4.13

3.38

3.38

3.38

4.13

4.13

4.13

4.13

5.63

5.63

4.13

4.13

5.63

5.63

5.63

5.63

5.63

5.63

152.4 x 50.8

152.4 x 63.5

152.4 x 76.2

152.4 x 101.6

152.4 x 12.7

152.4 x 19.0

152.4 x 25.4

152.4 x 38.1

101.6 x 38.1

101.6 x 50.8

101.6 x 63.5

101.6 x 76.2

76.2 x 50.8

101.6 x 12.7

101.6 x 19.0

101.6 x 25.4

76.2 x 12.7

76.2 x 19.0

76.2 x 25.4

76.2 x 38.1

50.8 x 38.1

63.5 x 19.0

63.5 x 38.1

63.5 x 50.8

38.1 x 25.4

50.8 x 12.7

50.8 x 19.0

50.8 x 25.4

25.4 x 12.7

25.4 x 19.0

38.1 x 12.7

38.1 x 19.0

3/4 x 1/2

mm

B

in mm

19.0 x 12.7 2.00

11/2 x 3/4

11/2 x 1/2

1 x 3/4

1 x 1/2

2 x 1

2 x 3/4

2 x 1/2

11/2 x 1

21/2 x 1

21/2 x 3/4

21/2 x 1/2

2 x 11/2

3 x 3/4

3 x 1/2

21/2 x 2

21/2 x 11/2

3 x 2

3 x 21/2

3 x 11/2

3 x 1

4 x 11/2

4 x 1

4 x 3/4

4 x 1/2

6 x 1/2

4 x 3

4 x 21/2

4 x 2

DT-146 x 4

6 x 3

6 x 21/2

6 x 2

6 x 11/2

6 x 3/4

6 x 1

B7RWWMS Tri-Clamp Short Outlet Reducing Tee


in mm

Size A

in

B

A

Page 27

Tri-Weld® Fittings



54.0

50.8

60.3

60.3

60.3

54.0

73.0

66.7

66.7

66.7

66.7

79.4

79.4

73.0

73.0

92.1

92.1

79.4

79.4

98.4

98.4

98.43.88

3.88

3.88

3.13

3.13

3.63

3.63

2.88

2.88

3.13

3.13

2.63

2.63

2.63

2.88

2.38

2.38

2.38

2.63

2.00

2.13

2.1354.0

54.0

50.8

73.0

60.3

60.3

60.3

79.4

73.0

73.0

73.0

85.7

85.7

79.4

79.4

104.8

104.8

85.7

85.7

104.8

104.8

104.84.13

4.13

4.13

3.38

3.38

4.13

4.13

3.13

3.13

3.38

3.38

2.88

2.88

2.88

3.13

2.38

2.38

2.38

2.88

2.00

2.13

2.13

101.6 x 50.8

101.6 x 76.2

101.6 x 63.5

76.2 x 50.8

76.2 x 63.5

101.6 x 25.4

101.6 x 38.1

63.5 x 38.1

63.5 x 50.8

76.2 x 25.4

76.2 x 38.1

50.8 x 19.0

50.8 x 25.4

50.8 x 38.1

63.5 x 25.4

4 x 3

19.0 x 12.7

25.4 x 12.7

25.4 x 19.0

38.1 x 12.7

38.1 x 19.0

38.1 x 25.4

50.8 x 12.7

4 x 1

4 x 11/2

4 x 2

4 x 21/2

21/2 x 2

3 x 1

3 x 11/2

3 x 21/2

3 x 2

2 x 1

2 x 11/2

21/2 x 1

21/2 x 11/2

3/4 x 1/2

1 x 1/2

1 x 3/4

11/2 x 1/2

11/2 x 3/4

11/2 x 1

2 x 1/2

2 x 3/4

B9RWWWW Reducing Cross

Size A B

in mm in mm in mm

3.384.13 104.8

85.7

2.132.382.883.13

50.847.6 1.88

2.00

79.4

60.354.0

73.0

3.384.13 104.8

85.776.2101.6

1.882.002.132.382.883.13

25.438.150.863.5

12.719

11/2

1

1/2

3/4

43

221/2


DT-9B

Size A B

in mm in mm in

B9WWWW Equal Cross


79.4

47.650.854.0

mm

60.373.0

A

B

B

A

Page 28

Tri-Weld® Fittings




21/2

2

11/2

1

76.2

101.64

3

25.4

38.1

50.8

63.5

2.50

2.31

1.81

1.75

65.12.56

44.5

46.0

58.7

63.5

41.3

44.51.75

1.633/4 19.0

mm in

Size A

mm

33.31.3112.71/2


19WB Male NPT Adapter in

82.6

101.6

108.04.25

4.00

47.6

52.4

69.9

76.2

1.81

1.81 46.0

46.0

3.00

2.75

2.06

1.88

3.2576.2

101.6

152.4

25.4

38.1

50.8

63.5

DT-30

1/2

3/4

1

11/2

2

21/2

3

4

B16W End Cap, Automatic Weld

Size A

in mm in mm

8


6

12.7

19.0

in

25.438.150.863.576.2

111/2

2

321/2

64

16W End Cap


Size A

mminmm

101.6152.4203.2 2.63

2.251.501.251.000.750.560.38 9.5

14.319.125.431.838.157.266.7

A

A

Page 29

Tri-Weld® Fittings


Available in finishes: 316L - PC, PL, PD and PM. See Surface Finish Codes chart on page IV.

127.0

139.7

101.6

114.3

133.4

184.2

184.2

127.0

190.5

235.0

139.7

190.5

196.9

247.7

298.5

139.7

254.0

254.0

9.75

7.75

10.00

10.00

9.25

7.50

5.50

11.75

7.25

5.25

7.50

5.50

5.50

5.00

5.00

7.25

25.4 x 19.0

25.4 x 12.7

19.0 x 12.7 4.00

4.50

4.00

50.8 x 25.4

50.8 x 19.0

38.1 x 25.4

38.1 x 12.7

38.1 x 19.0

76.2 x 63.5

76.2 x 50.8

63.5 x 50.8

50.8 x 38.1

63.5 x 38.1

76.2 x 38.1

152.4 x 76.2

101.6 x 76.2

101.6 x 63.5

101.6 x 50.8

6 x 4 152.4 x 101.6

4 x 2

4 x 21/2

4 x 3

6 x 3

21/2 x 2

3 x 11/2

3 x 2

3 x 21/2

2 x 3/4

2 x 1

2 x 11/2

21/2 x 11/2

1 x 3/4

11/2 x 1/2

11/2 x 3/4

11/2 x 1

3/4 x 1/2

1 x 1/2

101.6

DT-11A

Size A


in mm in mm

101.6

50.8

B31 Concentric Reducer, Automatic Weld

152.4

50.8

120.7

50.8

152.4

203.2

50.8

101.6

139.7

139.7

101.64.00

5.50

5.50

4.00

2.00

8.00

6.00

2.00

4.75

2.00

6.00

2.00

4.00

63.5 x 38.1

50.8 x 38.1

50.8 x 25.4

38.1 x 25.4

76.2 x 63.5

76.2 x 50.8

76.2 x 38.1

63.5 x 50.8

152.4 x 76.2

101.6 x 76.2

101.6 x 63.5

101.6 x 50.8

6 x 4 152.4 x 101.6

4 x 2

4 x 21/2

4 x 3

6 x 3

11/2 x 1

2 x 1

2 x 11/2

21/2 x 11/2

21/2 x 2

3 x 11/2

3 x 2

3 x 21/2


L31 Concentric Reducer

Size

in mm

A

mmin

A

A

Page 30

Tri-Weld® Fittings



101.6

50.8

101.6

50.8

101.6

50.8

101.6

152.4

203.2

50.8

5.50

5.50

139.7

139.7

2.00

8.00

6.00

4.00

2.00

4.00

2.00

4.00

50.8 x 25.4

38.1 x 25.4 2.00

4.00

76.2 x 50.8

63.5 x 50.8

63.5 x 38.1

50.8 x 38.1

101.6 x 76.2

101.6 x 63.5

101.6 x 50.8

76.2 x 63.5

152.4 x 101.6

152.4 x 76.2

4 x 21/2

4 x 3

6 x 3

6 x 4

21/2 x 2

3 x 2

3 x 21/2

4 x 2

11/2 x 1

2 x 1

2 x 11/2

21/2 x 11/2

L32 Eccentric Reducer


Size A

mminmmin

101.6

114.3

76.2

88.9

152.4

101.6

152.4

101.6

108.0

158.8

203.2

108.0

161.9

212.7

263.510.38

8.38

6.38

4.25

8.00

6.25

4.25

4.00

6.00

4.00

6.00

3.50

3.00

4.50

4.0038.1 x 19.0

38.1 x 12.7

25.4 x 19.0

25.4 x 12.7

63.5 x 38.1

50.8 x 38.1

50.8 x 25.4

38.1 x 25.4

76.2 x 63.5

76.2 x 50.8

76.2 x 38.1

63.5 x 50.8

101.6 x 76.2

101.6 x 63.5

101.6 x 50.84 x 2

4 x 21/2

4 x 3

21/2 x 2

3 x 11/2

3 x 2

3 x 21/2

11/2 x 1

2 x 1

2 x 11/2

21/2 x 11/2

1 x 1/2

1 x 3/4

11/2 x 1/2

11/2 x 3/4

3/4 x 1/2 19.0 x 12.7 3.00 76.2

B31M Concentric Reducer, Tri-Clamp x Automatic Tri-Weld

DT-26

Size


A

mminmmin

A

A

Page 31

Tri-Weld® Fittings

Available in finishes: 316L - PC, PL, PD and PM. See Surface Finish Codes chart on page IV.


4 x 3 101.6 x 76.2 6.38 161.9

4 x 21/2 101.6 x 63.5 8.38 212.7

4 x 2 101.6 x 50.8 10.38 263.5

3 x 21/2 76.2 x 63.5 4.25 108.0

3 x 2 76.2 x 50.8 6.25 158.8

3 x 11/2 76.2 x 38.1 8.00 203.2

21/2 x 2 63.5 x 50.8 4.25 108.0

21/2 x 11/2 63.5 x 38.1 6.00 152.4

2 x 11/2 50.8 x 38.1 4.00 101.6

38.1 x 25.4 4.00 101.6

2 x 1 50.8 x 25.4 6.00 152.4

114.3

38.1 x 19.0 4.00 101.6

38.1 x 12.7 4.50

19.0 x 12.7 3.00 76.2

88.9

25.4 x 19.0 3.00 76.2

25.4 x 12.7 3.50

in mm in mm

Size A

6 x 3 152.4 x 76.2 10.00

6 x 4 152.4 x 101.6 10.00

4 x 21/2 101.6 x 63.5 9.75

4 x 3 101.6 x 76.2 7.75

3 x 21/2 76.2 x 63.5 5.50

4 x 2 101.6 x 50.8 11.75

3 x 11/2 76.2 x 38.1 9.25

3 x 2 76.2 x 50.8 7.50

21/2 x 11/2 63.5 x 38.1 7.25

21/2 x 2 63.5 x 50.8 5.50

2 x 1 50.8 x 25.4 7.25

2 x 11/2 50.8 x 38.1 5.25

11/2 x 3/4 38.1 x 19.0 5.00

11/2 x 1 38.1 x 25.4 5.00

19.0 x 12.7 4.00

1 x 3/4 25.4 x 19.0 4.00

1 x 1/2 25.4 x 12.7 4.50

11/2 x 1/2 38.1 x 12.7 5.50


196.9

254.0

254.0

190.5

139.7

298.5

247.7

133.4

184.2

139.7

235.0

139.7

127.0

127.0

184.2

101.6

114.3

101.6

B32M Eccentric Reducer, Tri-Clamp x Automatic Tri-Weld

DT-26B


3/4 x 1/2

1 x 1/2

1 x 3/4

11/2 x 3/4

11/2 x 1/2

11/2 x 1

B32 Eccentric Reducer, Automatic Weld

DT-11B

Size A

mminmmin

3/4 x 1/2

A

A

Page 32

Bevel Seat Fittings

Page 33

Bevel Seat Fittings


0.75 19.0 0.50 12.7 0.88 22.2 1.00 25.40.88 22.0 0.63 15.9 1.38 34.9 1.50 38.10.97 24.6 0.69 17.5 1.88 47.6 2.00 50.81.06 27.0 0.75 19.0 2.38 60.3 2.50 63.51.13 28.6 0.81 20.6 2.88 73.0 3.00 76.21.25 31.8 0.94 23.8 3.83 97.2 4.00 101.6





14PRFS Plain Short Weld Ferrule

14R Plain Ferrule for Expanding

14 Plain Recessed Weld Ferrule

L14A Plain Long Weld Ferrule

25.4

1.31238.1

Size

18.3

1

11/2

2

21.4

0.75

23.0

A

0.911.22 31.0

1.751.75

0.84

0.69

0.720.72

1.125 28.6

1.4371.50

1.375

21/2

in

1

11/2

2

34

76.20101.60

A

25.40

38.1050.8063.50

mm

B C


Size D

21/2

34

111/2

2

A


in mmmmin

Size

63.576.2

101.6

25.4

38.150.8

44.544.5

1.381.501.501.75 44.5

38.1

11/2

in

Size A

in mm mm

17.518.3

1

38.134.9

76.2101.6


25.4

38.150.863.5

221/2

34

B


in mm in mm in mm

21/2

34

50.863.576.2

101.6 38.136.5

1.001.50

19.0

2.002.503.00

33.334.9

4.00 101.676.263.550.838.125.4

A

A

Page 34

Bevel Seat Fittings

in mm

1 25.411/2 38.12 50.8

21/2 63.53 76.24 101.6




0.81 20.6 0.50 12.7 0.88 22.2 1.00 25.40.88 22.2 0.63 15.9 1.38 34.9 1.50 38.11.03 26.2 0.69 17.5 1.88 14.6 2.00 50.81.13 28.6 0.75 19.0 2.38 60.3 2.50 63.51.25 31.8 0.81 20.6 2.88 73.0 3.00 76.21.38 34.9 0.94 23.8 3.83 97.2 4.00 101.6


Available in finishes: 304 - #7; 316 - #7. See Surface Finish Codes chart on page IV.

15 Threaded Recessed Weld Ferrule

L15A Threaded Long Weld Ferrule

14W Plain Tank Weld Ferrule

14WL Plain Light Tank Weld Ferrule

60.3

89.7

70.677.8

C D

1.751.75

34.938.1

97.2

1.88

3.832.882.38

47.660.373.0

64.3

109.5

2.5063.5 2.75

25.4

50.8

C


in mm in mm in

ASize B

mm

29.422.20.8842.5

1.25

55.668.681.8

108.03.222.702.191.671.16

34.92.382.532.78

1.38

3.063.534.31

Size


A

in mm in mm

111/2

221/2

34

38.1

4.003.0076.2

101.6

2.252.00 50.8

57.263.569.976.2

101.6

11/2

2

Size

in mm

A B


4 101.6

21/2

3

38.1

76.263.5

1

50.8

25.4

Size A

mm


in mm in

21/2

1.381.501.50

25.438.150.8

34

111/2

263.5

38.144.544.5

1.7576.2

44.5101.6

A

B C

A

A

Page 35

Bevel Seat Fittings

Available in finishes: 304 - #7; 316 - #7. See Surface Finish Codes chart on page IV.


in mm

1 25.411/2 38.12 50.8

21/2 63.53 76.24 101.6



15W Threaded Tank Weld Ferrule

15WL Threaded Light Tank Weld Ferrule

15TRFS Threaded Short Weld Ferrule

15R Threaded Ferrule for Expanding

50.8

4.00

2.502.75

44.544.546.054.0

Size B

2.13

mm

38.141.3

63.5

3.00

1.751.751.81

101.6

1.63

A

38.141.341.3


76.23101.6

76.2

38.150.8

101.6

1.503.004.00

18.318.321.4

4

221/2

3

0.720.720.840.910.53

11/2

Size A

in mm in mm


0.6925.4 17.51

23.013.5

1 0.81

2.0011/2

221/2

34.91.381.13

B


in mm in mm in mm

Size A

1.00

4

38.150.8

25.4

63.576.2

1.63

2.50 63.5

25.438.1

20.628.6 1.50

in

0.881.38

in

1.631.50 31.8

44.5

mm

1.75

97.2

C

in

22.2 1.2534.9

mm

1.882.382.883.83

47.6

73.060.3

2.31 58.773.085.7

108.03.382.88

4.25


Size A

in mm in mm

111/2

2.002.25

50.8

50.8

63.5

25.438.1

63.557.2

69.92

321/2

476.2

101.676.2

101.6

A

B C

A

A

Page 36

Bevel Seat Fittings

Available in 304.

Available in NEO and G. See gasket material chart on page V



16A Plain Solid End Cap

14AHR Plain x Rubber Hose Adapter

13H Bevel Seat Nut

ST40 Gasket (Snap Tite)

4.00

38.150.863.576.2

101.6

1.502.002.503.0088.9

101.6

6.942.312.343.504.00

76.2101.64

3

mm

Size A

63.521/2

176.258.759.5

B

in

11/2

238.150.8

38.150.8


in mm in mm

B

in

1.28 32.530.21.19

0.910.971.06

33.3

1.50 38.1

2.913.44

Size

in mm

111/2

3

2

A

in mm


mm

1.812.41

25.438.150.863.576.2

91.3106.4

23.024.627.0

4.19

46.061.176.2

Size

in mm

3.59

101.6

21/2

4 5.44

21/2

138.1

3.00

211/2

1 25.4

63.5

Size A

76.2101.64

3

111/2

221/2

3


in mm in mm

1.311.842.38

4

25.438.150.863.576.2

101.6 4.50 114.387.373.860.346.8

Page 37

Bevel Seat Fittings





21 Threaded x Male NPT Adapter

22 Threaded x Female NPT Adapter

14AHT Plain x Tygon Hose Adapter

15AHT Threaded x Tygon Hose Adapter

0.670.75

15.213.913.917.119.1

55.057.2

53.259.5

55.62.192.09

25.4 x 25.4

38.1 x 38.150.8 x 50.863.5 x 63.576.2 x 76.2

11/2 x 11/2

2 x 221/2 x 21/2

3 x 3

in mm

1 x 1 2.17 0.60


Size A B

in mm in mm

16.718.319.129.030.6

0.6657.261.967.583.388.9

3.28

2.2525.4 x 25.4

38.1 x 38.150.8 x 50.863.5 x 63.576.2 x 76.2

1 x 1

Size A B

3 x 3

in mm in mm

3.50

mm

34

124.6132.6

76.2101.6


25.438.150.863.576.2

101.6

123.0

119.1119.9119.9

2.50

1.502.00

3.004.00

4.694.724.72

5.22

4.844.91

221/2 63.5

38.125.4

50.8

in

111/2


Size A B

mminmm

221/2

34 132.6

111/2

25.4

in mm

101.676.263.550.838.125.4


Size A B

mminmmin

124.6

2.340.552.250.55

1.502.002.503.004.00

1.00

in

119.1 1.004.69

1.20

0.720.751.14

11/2 x 11/2

2 x 22.442.66

21/2 x 21/2

101.6 5.22

123.0119.9119.9

76.263.550.8 4.72

4.84

38.1

in

4.91

4.72

mm

A

B

A

B

Page 38

Other Fittings

Page 39

DC Fittings

Available in finishes: 304 - #7; 316L #7. See Surface Finish Codes chart on page IV.


Available in U. See gasket material chart on page V

Note: The DC connection uses a standard Bevel Seat "plain" end and the standard 13H Hex Nut.

DC40 Gasket

15TRFDC Threaded Short Weld Ferrule

L15ADC Threaded Long Weld Ferrule

in

Size A

mmin

21/2

3

4

mm

26.2

23.0

22.2

0.72

0.75

4 101.6

1.03

0.88

0.91

mm in


Size A

63.5

38.1 1.50

44.51.751.75

44.5


11/2

2

mm

38.1

50.8

18.3

19.1

76.2

101.6

in

4

11/2

221/2

38.138.144.51.75

1.50

in mm

3 76.2101.6

Sizes

50.863.5

3

38.1

50.8

63.5

76.2

1½

2

2½

Page 40

H-Line Fittings




Available in X and U. See gasket material chart on page V

Note: The H-Line connection uses the Tri-Clamp® Clamp. See pages 10-12

H-16A-14 Male Solid End Cap

This connection utilizes a standard Tri-Clamp clamp.

H40 Gasket mm

4

25.4

H-14W Male Short Weld Ferrule

H-15W Female Short Weld Ferrule

38.150.863.576.2101.6

Sizes

in

111/2

221/2

3

41.354.066.779.4

104.0

1.6350.863.577.0

2.002.503.03

2.132.63

mm

38.150.863.576.2

101.6

2

B

21/2

34

ASize

in

11/2

in mm in mm

34 101.6

25.425.41.0076.2

25.41.0050.8221/2 63.5

Size

in mm

1 25.4

25.425.4

1.00

11/2 38.1

A

in mm

25.425.425.4


111/2

2

25.438.150.8

1.001.00

Size

in mm

90.5

21/2

43

63.576.2

1.00

3.134.09

1.00 25.4

4.69 119.13.56


1.00

1.00


101.6

25.4

A

in

1.00

1.00

1.00

mm

25.425.4

Page 41

HDI-Line Fittings





HDI-14W Male Short Ferrule

HDI-16A-15 Female Solid End Cap

HDI-16A-14 Male Solid End Cap

HDI-15W Female Short Ferrule

19.823.826.229.431.034.1

0.780.94

Size

in mm

A

in mm

4

63.576.2

101.6

25.438.150.82

21/2

3

1

in mm

31.034.1

A


19.823.826.2

0.780.941.03

25.438.150.863.576.2

1

11/2

221/2

101.634


Size A

in mm in mm

11/2

2

Size

11/2

in mm

21/2

34

38.150.863.576.2

101.6

2.002.663.313.884.88

50.867.584.198.4

123.8

in

1.752.252.753.314.31

69.984.1

109.5

Size

mmin

38.150.8

76.2101.6


B

mm

44.557.2

11/2

A

in

2.00

mm

50.8

3.884.88

2 2.66

43

21/2 63.5

1.161.221.34

29.4

123.8

in

B

mm

1.752.252.75

4.31

44.557.269.984.1

109.53.31

1.22

1.031.16

1.34

67.584.198.4


3.31

Page 42

HDI-Line Fittings

Available in finish: 304. See Surface Finish Codes chart on page IV.

Available in E, U, G, and SFY. See gasket material chart on page V

HDI-13-UD Clamp

Size A

in mm in mm

11/2


221/2

38.150.863.5

34

76.2101.6

105.6130.2

2.222.973.594.165.13

56.475.491.3

Sizes

in mmHDI-40 Gasket

1

211/2

21/2

43 76.2

101.6

25.438.150.863.5

Page 43

John Perry Fittings





L14AJP Plain Long Weld Ferrule

L15AJP Threaded Long Weld Ferrule

14PRFJP Plain Short Weld Ferrule

15TRFJP Threaded Short Weld Ferrule

17.517.519.121.422.226.2

0.84

4

25.438.150.863.576.2

101.6

A

in mm in mm

2

Size

1

21/2

34

11/2

221/2

3

25.438.150.8


111/2

0.630.66

15.916.6

A

in mm in mm

Size

0.660.780.810.91

0.69

20.623.0

19.816.6


63.576.2

101.6

0.881.03

0.750.69

11/2 1.502

21/2

34


in mm in mm

Size A

1.751.75

38.150.863.576.2

101.6

38.138.144.544.544.5

1.501.75

11/2 1.38

2

21/2

3

4


in mm in mm

Size A

1.75

1.75

38.1

50.8

63.5

76.2

101.6

38.1

34.9

38.1

44.5

44.5

1.50

1.50

Page 44

John Perry Fittings


Available in E, U, G and SFY. See gasket material chart on page V

16AJP Plain Solid End Cap

40JP Gasket


Size A B

in mm in mm in mm

1 0.44 1.3125.411/2

221/2

363.576.2

101.6

38.150.8

0.500.530.560.63

14.315.9

11.112.713.5

2.842.382.913.444.504

63.5

33.372.260.373.887.3

114.30.69 17.5

Sizes

in mm

111/2

2

34

25.438.150.8

76.2101.6

21/2

Page 45

IPS Schedule 5 Fittings



in mm in mm in mm

1.63 41.3 1.19 30.1 1.53 38.91.63 41.3 1.77 45.0 2.11 53.61.75 44.5 2.25 57.0 2.59 65.91.75 44.5 2.71 68.7 3.11 79.01.81 46.0 3.33 84.7 3.56 90.52.13 54.0 4.33 110.1 4.56 115.9


Available in finish: 304. See Surface Finish Codes chart on page IV.** For the 1" - 2½" Schedule 5 clamps and caps, use standard Tri-Clamp clamp or cap for the next larger nominal OD size. (eg. Use 13MHHM-2-S for 1½" Schedule 5 Ferrules.)

13MHLVA Clamp mm

133.4

14WLMV** Tri-Clamp Light Tank Weld Ferrule

14MVW** Tri-Clamp Tank Weld Ferrule

4.25

221/2

IPS Nominal Sizein inches


1

11/2

34

4

3

6.008

A

152.4

76.276.276.2

101.6101.6

76.23.004.004.00

21/2

34

A

11/2

3.00

0.50 12.7

0.500.50

12.712.712.7

6.00

3.00

68

1.50

23.00

in



1

11/2

in mm

0.50

AIPS Nominal Size

in inches

221/2

34

14WMV** Tri-Clamp Short Weld Ferrule

B

A

0.50

1.50

5.25


38.138.1

6

1

mm

12.70.63 15.9

152.4


in

108.0


C

A

A

A

B C

A

Page 46






16AMV** Tri-Clamp Solid End Cap

** For the 1" - 2½" Schedule 5 clamps and caps, use standard Tri-Clamp® clamp or cap for the next larger nominal OD size. (eg. Use 13MHHM-2-S for 1½" Schedule 5 Ferrules.)

4

13MHHVM** Heavy Duty Tri-Clamp with Wing Nut

13MHPV** High Pressure Tri-Clamp

A13MV** Light Duty Tri-Clamp with T-Bolt



A

185.9

4.225.227.326

8

in mm

4 132.6107.23



131.65.18

A


in mm

346 185.97.32

108.2

236.71012

290.6341.4

11.4413.44


A

in mm

3

5.264.26

9.32

133.6

IPS Nom Sizein inches

3

4

8

6

11.2

11.2

0.38 9.7

0.44

mm in


in mm

A

182.9

130.3

104.90.31 7.9

7.20

B

0.44

4.81 122.2

4.13

5.13

233.79.20

A

A

A

A

B

Page 47


Available in U and G. See gasket material chart on page V

Available in U and X. See gasket material chart on page V

Available in GR. See gasket material chart on page V

A40MV-GR Tri-Clamp Teflon Envelope Gasket

40MV Tri-Clamp Gasket

40MVF Tri-Clamp Flanged Gasket

Sizes

21/2


111/2

2

81012

8

Sizes


6

111/2

2

Sizes

21/2

34


2346

1012

346

Page 48

Miscellaneous Fittings

Page 49



Available in finishes: 304 - #1, #7; 316L #1, #7, PL and PM. See Surface Finish Codes chart on page IV.

in mm in mm

3.50 88.9 0.38 9.7

3.87 98.3 0.38 9.7

4.25 108.0 0.38 9.5

5.00 127.0 0.38 9.5

6.00 152.4 0.44 11.1

7.00 177.8 0.44 11.1

7.50 190.5 0.50 12.7

9.00 228.6 0.50 12.7

11.00 279.4 0.56 14.3

Available in finishes: 304; Carbon Steel. See Surface Finish Codes chart on page IV.

* Bolt holes are 1/8" larger in diameter than recommended bolt.

38SL Slip-on Flange

Drilling and OD match ASA B 16.5-150 lb. Steel Flange Standard, MSS SP-42 150 lb. Corrosion Resistant Valve Standard and ASA B16.1-125 lb. Cast Iron Flange Standard.

14VA Flared Nipple

14VB Lap Joint Stub End

8 - 7/8


9 1/2

Bolt CircleNumber and

Diameter (in) of Bolt Holes*

4 3/4

5 1/2

6

7 1/2

4 - 3/4

8 - 3/4

B

4 - 3/4

4 - 3/4

3 1/8

3 7/8

4 - 5/8

4 - 5/8

A

1/2 12.7

Size

in mm

152.4

101.6

76.2

63.5

50.8

38.1

4

6

21/2

3

2 3/8

2 3/4

4 - 5/8

4 - 5/8

19.0

25.4

11/2

2

3/4

1

88.9 8.633.50

92.2104.9127.0157.26.19

5.004.133.63

219.2

42.942.950.873.22.88

2.001.691.69

2.50

50.850.850.850.863.563.563.563.5101.6

152.4

2.002.002.002.002.502.502.50

46

12.719.0

25.438.150.863.576.2

11/2

221/2

3

mm

1/2

3/4

1

B

in mmin in mm

5.637.75

66.776.2


ASize


2.503.253.75

1.631.751.50

25.4

4.38

41.344.538.150.8

2.633.00

57.2

50.863.5

in

111/2

221/2

4

B

in mm

44.51.75

Size

38.1

A

mm in mm

63.582.6

196.9142.9111.195.3

32.002.2576.2

101.6152.46

A

B

Page 50


Available in SFY and U. See gasket material chart on page V

Insert Replacements for A24FCF Hinged Pipe Hanger


A24FCF Hinged Pipe Hanger Size Interchangeability


A24FCF-3-SA24FCF-4-SA24FCF-6-S

A24FCF-11/2-08A24FCF-11/2-08

2 to 11/2"3 to 21/2"

A24FCF-1-08A24FCF-1-08

11/2 to 1"2 to 1"

Order Inserts:To Decrease Size:

A24FCF-2-08A24FCF-2-08

11/2 to 2"21/2 to 3"

A24FCF-11/2-08A24FCF-2-08

1 to 11/2"1 to 2"

Order Inserts:To Increase Size:

A24FCF-11/2-08

Uses Insert No.

A24FCF-1-08

115.94.564.00

7.59

4.565.69

101.6115.9

144.5

A24FCF-11/2-SA24FCF-2-S

Tube OD

Hanger No.

A24FCF-1-S

152.4192.8 6.00

50.863.576.2

101.64.003.002.502.00

101.64.004.00 25.4

38.11.001.5011/2

2

25.4

50.838.1

1

152.4

21/2

346

63.576.2

101.6

101.6

mmin

B


A

in mm

Size

in mm

A24FCF Hinged Pipe Hanger

A24FCF-21/2-S

A24FCF-11/2-08A24FCF-2-08

A24FCF-2-08A24FCF-2-08A24FCF-6-08

Page 51




B24FCF and C24FCF Pipe Hanger Size Interchangeability


Insert Replacements for B24FCF & C24FCF Ceiling Pipe Hangers

B24FCF Two Piece Pipe Hanger

C24FCF Two-Piece Pipe Hanger with Threaded Connector in mm

101.6

76.2

21/2

2

4

3

1/2

3/4

1

11/2 38.1

25.4

19.0

12.7

63.5

50.8

4.75

5.25

6.25

2.69

3.25

4.25

3.75

68.32.69

108.0

95.3

82.6

68.3

158.8

133.4

120.7 2.50

3.00

4.00

12.70.50

50.8

38.1

25.4

19.10.75

1.00

1.50

2.00

101.6

76.2

63.5

in mm

Size A B

in mm

76.2101.6


4.00158.86.255.253

38.1

63.550.8

1.000.750.50 12.7

19.125.4

95.3

3.00

108.0120.7133.4

2.502.001.50

4.7563.576.2

101.64

38.150.82

21/2

mm

12.7

Size

1/2

4.253.753.25

B

2.692.69

68.368.3

82.6


in mmin mm in

A

3/4

1 25.411/2

19.0

Available in sizes 1/2, 3/4, 1, 11/2, 2, 21/2, 3, & 4"

To Increase Size:

1/2 to 3/4"

Order Inserts:To Decrease Size:

Each model B24FCF and C24FCF hanger requires two inserts. (1/2 and 3/4" sizes require one.) Standard Material is Buna. Order by size as shown below:

B24FCF-size-02

B24FCF-3/4-02

Order Inserts:

B24FCF-1/2-023/4 to 1/2"

Page 52


Available in 304.

Available in 304.

Available in 304.

29 Wall Plate

D24FCF PVC Pipe Hanger

46.0

mmin mm in

B

mm in mm

1.061.061.311.561.81

63.5

E24FCF PVC Pipe Hanger with Threaded Connection

76.2101.6

25.438.150.8

Size A

1.311.56

1.061.0625.4

38.1

127.0152.4177.8

5.006.00

127.0127.0127.0

5.005.005.00

7.00

34

25.438.150.863.576.2

101.6

111/2

221/2


Size A

in mm in mm

90.5100.0

71.4

3.9433.3

2.31

34

71.4

4.565.56 141.3

115.9

2.812.813.56

27.027.0

58.746.039.7

111/2

221/2

141.3


in mm in

58.7 5.564

71.471.490.5

115.9100.0

4.56

27.027.033.339.7 3.94

3.562.812.81

in mm

50.821/2

76.2101.6 2.31

1.81

2


Size A B

63.5

111/2

3

AA

Page 53


in mm in mm in mm

1.86 47.2 2.47 62.7 12.38 314.3

2.47 62.7 3.06 77.8 14.00 355.6

3.06 77.8 3.66 92.9 18.00 457.2

in mm in mm in mm

2.47 60.5 3.06 77.7 11.81 300.0

25H Wrench for Bevel Seat Nut, Single End

H25H Wrench for Bevel Seat Nut, Single End Short Handle

25HA Wrench for Bevel Seat Nut, Double End

H25HA Wrench for Bevel Seat Nut, Double End Short Handle

279.4

2 x 11/2

mm

Size

in

252.5

B C

108.0

B

50.8 x 38.1


25.4

3 76.2

111/2

221/2

62.747.21.86

2.4777.7

in

11/2 x 1 38.1 x 25.4


Size A

2 x 11/2 50.8 x 38.1

11.12

mm

A

21/2 x 2 63.5 x 50.8

3.064.2563.5

50.838.1

C

282.4

6.888.509.009.94

228.6215.9174.8

0.0

inin mm mm in mm

533.4

B


5.48

444.5381.0323.9

23.25 590.6

12.7515.0017.5021.00108.0

139.3

2.473.063.664.25

62.777.892.963.5

76.2

50.8

101.6

11/2

221/2

3

38.1

4


in mm in mm in mm

Size A B

1 25.4 1.86 11.0047.2

Size A

Page 54

IndexBy Description

Description Family ProdType Model Page No.10 Mesh Screen Gasket Tri-Clamp Gaskets Tri-Clamp 40MPS 12180 - No Tangent, "Long Radius" Tri-Weld Bends Tri-Weld 2WUL 223-Segment Clamp Tri-Clamp Clamps Other Connections 13MHHS 103-Segment Clamp Tri-Clamp Clamps Other Connections A13MHHS 103-Segment Clamp Tri-Clamp Clamps Tri-Clamp 13MHHS 103-Segment Clamp Tri-Clamp Clamps Tri-Clamp A13MHHS 1045 - Clamp x Weld, Long Tangent Tri-Clamp Bends Tri-Clamp B2KMW 2145 - Long Tangent Weld Bend Tri-Weld Bends Tri-Weld B2KS 2145 - No Tangent, "Long Radius" Tri-Weld Bends Tri-Weld 2WK 2145 - Tri-Clamp Tri-Clamp Bends Tri-Clamp B2KMP 390 - Clamp x Weld Tri-Clamp Bends Tri-Clamp L2CM 1990 - Clamp x Weld Tri-Weld Bends Tri-Weld L2CM 1990 - Clamp x Weld, Long Tangent Tri-Clamp Bends Tri-Clamp B2CMW 2090 - Clamp x Weld, Long Tangent Tri-Weld Bends Tri-Weld B2CMW 2090 - Clamp x Weld, Long Tangent Tri-Weld Bends Tri-Weld B2KMW 2190 - Long Tangent Weld Bend Tri-Weld Bends Tri-Weld B2S 1990 - No Tangent, "Long Radius" Tri-Weld Bends Tri-Weld 2WCL 1990 - Non-Tapered Reducing Tri-Clamp Bends Tri-Clamp 2CMP-31MP 290 - Plain x Tri-Clamp Tri-Clamp Bends Tri-Clamp 2FMP-14 290 - Threaded x Tri-Clamp Bevel Seat Bends Bevel Seat 2FMP-15 290 - Threaded x Tri-Clamp Tri-Clamp Bends Tri-Clamp 2FMP-15 290 - Tri-Clamp Tri-Clamp Bends Tri-Clamp B2CMP 290 - Weld Bend Tri-Weld Bends Tri-Weld L2S 1990 - Weld x Plain Bevel Seat Bevel Seat Bends Bevel Seat L2F 2090 - Weld x Plain Bevel Seat Tri-Weld Bends Tri-Weld L2F 2090 - Weld x Threaded Bevel Seat Bevel Seat Bends Bevel Seat L2C 2090 - Weld x Threaded Bevel Seat Tri-Weld Bends Tri-Weld L2C 20Bevel Seat Nut Bevel Seat Nuts Bevel Seat 13H 37Bevel Seat Nut Bevel Seat Nuts Other Connections 13H 37Bevel Seat Plain Cap Bevel Seat Caps Bevel Seat 16A 37Bevel Seat Wrench, double end Wrenches Misc. Fittings 25HA 54Bevel Seat Wrench, long handle Wrenches Misc. Fittings 25H 54Bevel Seat Wrench, short double end Wrenches Misc. Fittings H25HA 54Bevel Seat Wrench, short handle Wrenches Misc. Fittings H25H 54Bolted Hanger for Field Welding Hangers Misc. Fittings B24FCF 52Bolted Hanger w/ PVC Insert Hangers Misc. Fittings D24FCF 53Bolted Hanger with Threaded Stud Hangers Misc. Fittings C24FCF 52Bottom Outlet Use Point Use-Point Fittings Tri-Weld B2UMPBOA 22Clamp Run Instrument Tee Tri-Clamp Tees Tri-Clamp B7IMPS 4Concentric - Clamp x Long Tangent Tri-Clamp Reducers Tri-Clamp B31M 31Concentric Reducer, No Tangent Tri-Weld Reducers Tri-Weld L31 30Concentric, Long Tangent Tri-Weld Reducers Tri-Weld B31 30Concentric, Tri-Clamp Tri-Clamp Reducers Tri-Clamp B31-14MP 17Cross, Long Tangent Tri-Weld Crosses Tri-Weld B9WWWW 28Cross, Tri-Clamp Tri-Clamp Crosses Tri-Clamp B9MP 6Cross, Tri-Clamp Tri-Clamp Tees Tri-Clamp B9MP 6DC Gasket DC Gaskets Other Connections DC40 40DC Threaded Weld Ferrule DC Ferrules Other Connections L15ADC 40Double Hinge Clamp Tri-Clamp Clamps Other Connections 13MHHM 9Double Hinge Clamp Tri-Clamp Clamps Tri-Clamp 13MHHM 9

IndexBy Description

Description Family ProdType Model Page No.Double Hinge Sch. 5 Clamp Sched. 5 Clamps IPS Sched. 5 13MHHVM 47Eccentric - Clamp x Long Tangent Tri-Clamp Reducers Tri-Clamp B32M 32Eccentric Reducer, No Tangent Tri-Weld Reducers Tri-Weld L32 31Eccentric, Long Tangent Tri-Weld Reducers Tri-Weld B32 32Eccentric, Tri-Clamp Tri-Clamp Reducers Tri-Clamp B32-14MP 17Equal Tee, Long Tangent Tri-Weld Tees Tri-Weld B7WWW 23Equal Tee, Tri-Clamp Tri-Clamp Tees Tri-Clamp B7MP 3Equal Tee, Weld x Clamp Outlet Tri-Clamp Tees Tri-Clamp B7WWM 23Equal Tee, Weld x Clamp Outlet Tri-Weld Tees Tri-Weld B7WWM 23Ferrule for Expanding Tri-Clamp Ferrules Tri-Clamp 14RMP 7Ferrule HDI Female Short HDI Ferrules Other Connections HDI-15W 42Ferrule HDI Male Short HDI Ferrules Other Connections HDI-14W 42Ferrule H-Line Female Short H Line Ferrules Other Connections H-15W 41Ferrule H-Line Male Short H Line Ferrules Other Connections H-14W 41Flanged Type 2 Gasket Tri-Clamp Gaskets Tri-Clamp 40MOF 11Flanged Type 2 Gasket Tri-Clamp Gaskets Tri-Clamp 40MPF 11Flanged Type 2 Gasket, Sch. 5 Sched. 5 Gaskets IPS Sched. 5 40MVF 48Flared Nipple Flanges / Stub Ends Misc. Fittings 14VA 50Flared Nipple Flanges / Stub Ends Tri-Weld 14VA 50Fractional Clamp Tri-Clamp Clamps Tri-Clamp 13MHHS Fractional 10Fractional Clamp Tri-Clamp Clamps Tri-Clamp A13MHHS Fractional 10Fractional TC Gasket Tri-Clamp Gaskets Tri-Clamp 42MP 11H Line Gasket H Line Gasket Other Connections H40 41H Line Male Cap H Line Caps Other Connections H-16A-14 41Hanger Insert Hangers Misc. Fittings A24FCF-08 51Hanger w/ PVC Insert & Threaded Stud Hangers Misc. Fittings E24FCF 53HDI Clamp With Wing Nut HDI Clamps Other Connections HDI-13UD 43HDI Female End Cap HDI Caps Other Connections HDI-16A-15 42HDI Gasket HDI Gaskets Other Connections HDI-40 43HDI Male End Cap HDI Caps Other Connections HDI-16A-14 42Heavy Wall Tank Ferrule Tri-Clamp Ferrules Tri-Clamp 14MPW 8Heavy Wall Tank Ferrule, Schd. 5 Sched. 5 Ferrules IPS Sched. 5 14MVW 46High Pressure Clamp Tri-Clamp Clamps Other Connections 13MHP 10High Pressure Clamp Tri-Clamp Clamps Other Connections A13MHP 10High Pressure Clamp Tri-Clamp Clamps Tri-Clamp 13MHP 10High Pressure Clamp Tri-Clamp Clamps Tri-Clamp A13MHP 10High Pressure Clamp Schd. 5 Sched. 5 Clamps IPS Sched. 5 13MHPV 47High Pressure Gasket, 1" only Tri-Clamp Gaskets Tri-Clamp 40MHP 11Hinged Hanger with Inserts Hangers Misc. Fittings A24FCF 51Hose Clamp Hose Clamp Misc. Fittings A14MHC 14Insert for D24FCF-PVC Hanger Hangers Misc. Fittings D24FCF-PVC Insert 53Instrument Tee, Weld Run Tri-Clamp Tees Tri-Clamp B7IWWMS 24Instrument Tee, Weld Run Tri-Weld Tees Tri-Weld B7IWWMS 24John Perry Gasket John Perry Gaskets Other Connections 40JP 45JP Plain End Cap John Perry Caps Other Connections 16AJP 45JP Plain Weld Ferrule John Perry Ferrules Other Connections L14AJP 44JP Plain Weld Ferrule, Short John Perry Ferrules Other Connections 14PRFJP 44JP Threaded Weld Ferrule John Perry Ferrules Other Connections L15AJP 44JP Threaded Weld Ferrule, Short John Perry Ferrules Other Connections 15TRFJP 44

IndexBy Description

Description Family ProdType Model Page No.Lap Joint Flange Flanges / Stub Ends Misc. Fittings 38SL 50Lap Joint Stub End Flanges / Stub Ends Misc. Fittings 14VB 50Lap Joint Stub End Flanges / Stub Ends Tri-Weld 14VB 50Light Toggle Clamp Tri-Clamp Clamps Other Connections 13MHLA 8Light Toggle Clamp Tri-Clamp Clamps Tri-Clamp 13MHLA 8Light Toggle Clamp, Sch. 5 Sched. 5 Clamps IPS Sched. 5 13MHLVA 46Medium Weight Clamp Tri-Clamp Clamps Other Connections 13MW 9Medium Weight Clamp Tri-Clamp Clamps Tri-Clamp 13MW 9Orifice Plate Gasket Tri-Clamp Gaskets Tri-Clamp A80MP 12Plain Bevel Seat x Rubber Hose Bevel Seat Adapters Bevel Seat 14AHR 37Plain Bevel Seat x Tygon Hose Bevel Seat Adapters Bevel Seat 14AHT 38Plain Ferrule for Expanding Bevel Seat Ferrules Bevel Seat 14R 34Plain Heavy Wall Tank Ferrule Bevel Seat Ferrules Bevel Seat 14W 35Plain Light Tank Ferrule Bevel Seat Ferrules Bevel Seat 14WL 35Plain Weld Ferrule Bevel Seat Ferrules Bevel Seat L14A 34Plain Weld Ferrule, Recessed Bevel Seat Ferrules Bevel Seat 14 34Plain Weld Ferrule, Short Bevel Seat Ferrules Bevel Seat 14PRFS 34Reducing Cross, Long Tangent Tri-Weld Crosses Tri-Weld B9RWWWW 28Reducing Tee, Long Tangent Tri-Weld Tees Tri-Weld B7RWWW 25Reducing Tee, Tri-Clamp Tri-Clamp Tees Tri-Clamp B7RMP 4Reducing Tee, Weld x Clamp Outlet Tri-Clamp Tees Tri-Clamp B7RWWM 26Reducing Tee, Weld x Clamp Outlet Tri-Weld Tees Tri-Weld B7RWWM 26Short Outlet Reducing, Tri-Clamp Tri-Clamp Tees Tri-Clamp B7RMPS 5Short Outlet Reducing, Weld x Clamp Outlet Tri-Clamp Tees Tri-Clamp B7RWWMS 27Short Outlet Reducing, Weld x Clamp Outlet Tri-Weld Tees Tri-Weld B7RWWMS 27Short Outlet Tee, Tri-Clamp Tri-Clamp Tees Tri-Clamp B7MPS 3Short Outlet Tee, Weld x Clamp Outlet Tri-Clamp Tees Tri-Clamp B7WWMS 24Short Outlet Tee, Weld x Clamp Outlet Tri-Weld Tees Tri-Weld B7WWMS 24Short Weld DC Ferrule DC Ferrules Other Connections 15TRFDC 40Side Outlet Use Point Use-Point Fittings Tri-Weld B2UMPSOA 23Single Hinge Clamp Tri-Clamp Clamps Other Connections A13MHM 9Single Hinge Clamp Tri-Clamp Clamps Tri-Clamp A13MHM 9Snap Tite Bevel Seat Gasket Bevel Seat Gaskets Bevel Seat ST40 37Standard Type 1 Gasket Tri-Clamp Gaskets Tri-Clamp 40MO 11Standard Type 1 Gasket Tri-Clamp Gaskets Tri-Clamp 40MP 11Standard Type 1 Gasket, Sch. 5 Sched. 5 Gaskets IPS Sched. 5 40MV 48Swivel Joint Tri-Clamp Clamps Tri-Clamp A12MPS 10Tank Welding Ferrule, Light Tri-Clamp Ferrules Tri-Clamp 14WLMO 7Tank Welding Ferrule, Light Tri-Clamp Ferrules Tri-Clamp 14WLMP 7Tank Welding Ferrule, Light Schd. 5 Sched. 5 Ferrules IPS Sched. 5 14WLMV 46T-Bolt Clamp Tri-Clamp Clamps Other Connections A13MO 8T-Bolt Clamp Tri-Clamp Clamps Tri-Clamp A13MO 8T-Bolt Clamp, Sch. 5 Sched. 5 Clamps IPS Sched. 5 A13MV 47Tee, Weld x Clamp x Weld Outlet Tri-Clamp Tees Tri-Clamp B7WMSW 24Tee, Weld x Clamp x Weld Outlet Tri-Weld Tees Tri-Weld B7WMSW 24Teflon Envelope Type 3 Gasket Tri-Clamp Gaskets Tri-Clamp A40MO 12Teflon Envelope Type 3 Gasket Tri-Clamp Gaskets Tri-Clamp A40MP 12Teflon Envelope Type 3 Gasket, Sch. 5 Sched. 5 Gaskets IPS Sched. 5 A40MV 48Thermometer Cap Tri-Clamp Caps Tri-Clamp 23BMP 16Threaded Bevel Seat x NPT Female Bevel Seat Adapters Bevel Seat 22 38

IndexBy Description

Description Family ProdType Model Page No.Threaded Bevel Seat x NPT Male Bevel Seat Adapters Bevel Seat 21 38Threaded Bevel Seat x Tygon Bevel Seat Adapters Bevel Seat 15AHT 38Threaded Ferrule for Expanding Bevel Seat Ferrules Bevel Seat 15R 36Threaded Heavy Wall Tank Ferrule Bevel Seat Ferrules Bevel Seat 15W 36Threaded Light Tank Ferrule Bevel Seat Ferrules Bevel Seat 15WL 36Threaded Weld Ferrule Bevel Seat Ferrules Bevel Seat L15A 35Threaded Weld Ferrule, Recessed Bevel Seat Ferrules Bevel Seat 15 35Threaded Weld Ferrule, Short Bevel Seat Ferrules Bevel Seat 15TRFS 36Tri-Clamp Cap Tri-Clamp Caps Tri-Clamp 16AMO 12Tri-Clamp Cap Tri-Clamp Caps Tri-Clamp 16AMP 12Tri-Clamp Cap, Schd. 5 Sched. 5 Caps IPS Sched. 5 16AMV 47Tri-Clamp Weld Ferrule Tri-Clamp Ferrules Tri-Clamp L14AM 6Tri-Clamp x NPT Female NPT Adapters IPS Sched. 5 22MP 16Tri-Clamp x NPT Female Tri-Clamp Adapters Tri-Clamp 22MP 16Tri-Clamp x NPT Male NPT Adapters IPS Sched. 5 21MP 15Tri-Clamp x NPT Male Tri-Clamp Adapters Tri-Clamp 21MP 15Tri-Clamp x Plain Bevel Seat Tri-Clamp Adapters Tri-Clamp 17MP-14 14Tri-Clamp x Rubber Hose Tri-Clamp Adapters Tri-Clamp 14MPHR 13Tri-Clamp x Threaded Bevel Seat Tri-Clamp Adapters Tri-Clamp 17MP-15 14Tri-Clamp x Tygon Hose Tri-Clamp Adapters Tri-Clamp 14MPHT 13Wall Plate Wall Plate Misc. Fittings 29 53Weld Cap, Long Tangent Tri-Weld Caps Tri-Weld B16W 29Weld Cap, Short Tri-Weld Caps Tri-Weld 16W 29Weld Ferrule, Long Tangent Tri-Clamp Ferrules Tri-Clamp BS14AM 7Weld Ferrule, Short Tri-Clamp Ferrules Tri-Clamp 14WMO 6Weld Ferrule, Short Sch. 5 Sched. 5 Ferrules IPS Sched. 5 14WMV 46Weld x NPT Male NPT Adapters IPS Sched. 5 19WB 29

IndexBy Model

Model Description Family ProdType Page No.14 Plain Weld Ferrule, Recessed Bevel Seat Ferrules Bevel Seat 3415 Threaded Weld Ferrule, Recessed Bevel Seat Ferrules Bevel Seat 3521 Threaded Bevel Seat x NPT Male Bevel Seat Adapters Bevel Seat 3822 Threaded Bevel Seat x NPT Female Bevel Seat Adapters Bevel Seat 3829 Wall Plate Wall Plate Misc. Fittings 5313H Bevel Seat Nut Bevel Seat Nuts Bevel Seat 3713H Bevel Seat Nut Bevel Seat Nuts Other Connections 3713MHHM Double Hinge Clamp Tri-Clamp Clamps Other Connections 913MHHM Double Hinge Clamp Tri-Clamp Clamps Tri-Clamp 913MHHS 3-Segment Clamp Tri-Clamp Clamps Other Connections 1013MHHS 3-Segment Clamp Tri-Clamp Clamps Tri-Clamp 1013MHHS Fractional Fractional Clamp Tri-Clamp Clamps Tri-Clamp 1013MHHVM Double Hinge Sch. 5 Clamp Sched. 5 Clamps IPS Sched. 5 4713MHLA Light Toggle Clamp Tri-Clamp Clamps Other Connections 813MHLA Light Toggle Clamp Tri-Clamp Clamps Tri-Clamp 813MHLVA Light Toggle Clamp, Sch. 5 Sched. 5 Clamps IPS Sched. 5 4613MHP High Pressure Clamp Tri-Clamp Clamps Other Connections 1013MHP High Pressure Clamp Tri-Clamp Clamps Tri-Clamp 1013MHPV High Pressure Clamp Schd. 5 Sched. 5 Clamps IPS Sched. 5 4713MW Medium Weight Clamp Tri-Clamp Clamps Other Connections 913MW Medium Weight Clamp Tri-Clamp Clamps Tri-Clamp 914AHR Plain Bevel Seat x Rubber Hose Bevel Seat Adapters Bevel Seat 3714AHT Plain Bevel Seat x Tygon Hose Bevel Seat Adapters Bevel Seat 3814MPHR Tri-Clamp x Rubber Hose Tri-Clamp Adapters Tri-Clamp 1314MPHT Tri-Clamp x Tygon Hose Tri-Clamp Adapters Tri-Clamp 1314MPW Heavy Wall Tank Ferrule Tri-Clamp Ferrules Tri-Clamp 814MVW Heavy Wall Tank Ferrule, Schd. 5 Sched. 5 Ferrules IPS Sched. 5 4614PRFJP JP Plain Weld Ferrule, Short John Perry Ferrules Other Connections 4414PRFS Plain Weld Ferrule, Short Bevel Seat Ferrules Bevel Seat 3414R Plain Ferrule for Expanding Bevel Seat Ferrules Bevel Seat 3414RMP Ferrule for Expanding Tri-Clamp Ferrules Tri-Clamp 714VA Flared Nipple Flanges / Stub Ends Misc. Fittings 5014VA Flared Nipple Flanges / Stub Ends Tri-Weld 5014VB Lap Joint Stub End Flanges / Stub Ends Misc. Fittings 5014VB Lap Joint Stub End Flanges / Stub Ends Tri-Weld 5014W Plain Heavy Wall Tank Ferrule Bevel Seat Ferrules Bevel Seat 3514WL Plain Light Tank Ferrule Bevel Seat Ferrules Bevel Seat 3514WLMO Tank Welding Ferrule, Light Tri-Clamp Ferrules Tri-Clamp 714WLMP Tank Welding Ferrule, Light Tri-Clamp Ferrules Tri-Clamp 714WLMV Tank Welding Ferrule, Light Schd. 5 Sched. 5 Ferrules IPS Sched. 5 4614WMO Weld Ferrule, Short Tri-Clamp Ferrules Tri-Clamp 614WMV Weld Ferrule, Short Sch. 5 Sched. 5 Ferrules IPS Sched. 5 4615AHT Threaded Bevel Seat x Tygon Bevel Seat Adapters Bevel Seat 3815R Threaded Ferrule for Expanding Bevel Seat Ferrules Bevel Seat 3615TRFDC Short Weld DC Ferrule DC Ferrules Other Connections 4015TRFJP JP Threaded Weld Ferrule, Short John Perry Ferrules Other Connections 4415TRFS Threaded Weld Ferrule, Short Bevel Seat Ferrules Bevel Seat 3615W Threaded Heavy Wall Tank Ferrule Bevel Seat Ferrules Bevel Seat 3615WL Threaded Light Tank Ferrule Bevel Seat Ferrules Bevel Seat 3616A Bevel Seat Plain Cap Bevel Seat Caps Bevel Seat 3716AJP JP Plain End Cap John Perry Caps Other Connections 45

IndexBy Model

Model Description Family ProdType Page No.16AMO Tri-Clamp Cap Tri-Clamp Caps Tri-Clamp 1216AMP Tri-Clamp Cap Tri-Clamp Caps Tri-Clamp 1216AMV Tri-Clamp Cap, Schd. 5 Sched. 5 Caps IPS Sched. 5 4716W Weld Cap, Short Tri-Weld Caps Tri-Weld 2917MP-14 Tri-Clamp x Plain Bevel Seat Tri-Clamp Adapters Tri-Clamp 1417MP-15 Tri-Clamp x Threaded Bevel Seat Tri-Clamp Adapters Tri-Clamp 1419WB Weld x NPT Male NPT Adapters IPS Sched. 5 2921MP Tri-Clamp x NPT Male Tri-Clamp Adapters Tri-Clamp 1521MP Tri-Clamp x NPT Male NPT Adapters IPS Sched. 5 1522MP Tri-Clamp x NPT Female Tri-Clamp Adapters Tri-Clamp 1622MP Tri-Clamp x NPT Female NPT Adapters IPS Sched. 5 1623BMP Thermometer Cap Tri-Clamp Caps Tri-Clamp 1625H Bevel Seat Wrench, long handle Wrenches Misc. Fittings 5425HA Bevel Seat Wrench, double end Wrenches Misc. Fittings 542CMP-31MP 90 - Non-Tapered Reducing Tri-Clamp Bends Tri-Clamp 22FMP-14 90 - Plain x Tri-Clamp Tri-Clamp Bends Tri-Clamp 22FMP-15 90 - Threaded x Tri-Clamp Tri-Clamp Bends Tri-Clamp 22FMP-15 90 - Threaded x Tri-Clamp Bevel Seat Bends Bevel Seat 22WCL 90 - No Tangent, "Long Radius" Tri-Weld Bends Tri-Weld 192WK 45 - No Tangent, "Long Radius" Tri-Weld Bends Tri-Weld 212WUL 180 - No Tangent, "Long Radius" Tri-Weld Bends Tri-Weld 2238SL Lap Joint Flange Flanges / Stub Ends Misc. Fittings 5040JP John Perry Gasket John Perry Gaskets Other Connections 4540MHP High Pressure Gasket, 1" only Tri-Clamp Gaskets Tri-Clamp 1140MO Standard Type 1 Gasket Tri-Clamp Gaskets Tri-Clamp 1140MOF Flanged Type 2 Gasket Tri-Clamp Gaskets Tri-Clamp 1140MP Standard Type 1 Gasket Tri-Clamp Gaskets Tri-Clamp 1140MPF Flanged Type 2 Gasket Tri-Clamp Gaskets Tri-Clamp 1140MPS 10 Mesh Screen Gasket Tri-Clamp Gaskets Tri-Clamp 1240MV Standard Type 1 Gasket, Sch. 5 Sched. 5 Gaskets IPS Sched. 5 4840MVF Flanged Type 2 Gasket, Sch. 5 Sched. 5 Gaskets IPS Sched. 5 4842MP Fractional TC Gasket Tri-Clamp Gaskets Tri-Clamp 11A12MPS Swivel Joint Tri-Clamp Clamps Tri-Clamp 10A13MHHS 3-Segment Clamp Tri-Clamp Clamps Other Connections 10A13MHHS 3-Segment Clamp Tri-Clamp Clamps Tri-Clamp 10A13MHHS Fractional Fractional Clamp Tri-Clamp Clamps Tri-Clamp 10A13MHM Single Hinge Clamp Tri-Clamp Clamps Other Connections 9A13MHM Single Hinge Clamp Tri-Clamp Clamps Tri-Clamp 9A13MHP High Pressure Clamp Tri-Clamp Clamps Other Connections 10A13MHP High Pressure Clamp Tri-Clamp Clamps Tri-Clamp 10A13MO T-Bolt Clamp Tri-Clamp Clamps Other Connections 8A13MO T-Bolt Clamp Tri-Clamp Clamps Tri-Clamp 8A13MV T-Bolt Clamp, Sch. 5 Sched. 5 Clamps IPS Sched. 5 47A14MHC Hose Clamp Hose Clamp Misc. Fittings 14A24FCF Hinged Hanger with Inserts Hangers Misc. Fittings 51A24FCF-08 Hanger Insert Hangers Misc. Fittings 51A40MO Teflon Envelope Type 3 Gasket Tri-Clamp Gaskets Tri-Clamp 12A40MP Teflon Envelope Type 3 Gasket Tri-Clamp Gaskets Tri-Clamp 12A40MV Teflon Envelope Type 3 Gasket, Sch. 5 Sched. 5 Gaskets IPS Sched. 5 48A80MP Orifice Plate Gasket Tri-Clamp Gaskets Tri-Clamp 12

IndexBy Model

Model Description Family ProdType Page No.B16W Weld Cap, Long Tangent Tri-Weld Caps Tri-Weld 29B24FCF Bolted Hanger for Field Welding Hangers Misc. Fittings 52B2CMP 90 - Tri-Clamp Tri-Clamp Bends Tri-Clamp 2B2CMW 90 - Clamp x Weld, Long Tangent Tri-Clamp Bends Tri-Clamp 20B2CMW 90 - Clamp x Weld, Long Tangent Tri-Weld Bends Tri-Weld 20B2KMP 45 - Tri-Clamp Tri-Clamp Bends Tri-Clamp 3B2KMW 45 - Clamp x Weld, Long Tangent Tri-Clamp Bends Tri-Clamp 21B2KMW 90 - Clamp x Weld, Long Tangent Tri-Weld Bends Tri-Weld 21B2KS 45 - Long Tangent Weld Bend Tri-Weld Bends Tri-Weld 21B2S 90 - Long Tangent Weld Bend Tri-Weld Bends Tri-Weld 19B2UMPBOA Bottom Outlet Use Point Use-Point Fittings Tri-Weld 22B2UMPSOA Side Outlet Use Point Use-Point Fittings Tri-Weld 23B31 Concentric, Long Tangent Tri-Weld Reducers Tri-Weld 30B31-14MP Concentric, Tri-Clamp Tri-Clamp Reducers Tri-Clamp 17B31M Concentric - Clamp x Long Tangent Tri-Clamp Reducers Tri-Clamp 31B32 Eccentric, Long Tangent Tri-Weld Reducers Tri-Weld 32B32-14MP Eccentric, Tri-Clamp Tri-Clamp Reducers Tri-Clamp 17B32M Eccentric - Clamp x Long Tangent Tri-Clamp Reducers Tri-Clamp 32B7IMPS Clamp Run Instrument Tee Tri-Clamp Tees Tri-Clamp 4B7IWWMS Instrument Tee, Weld Run Tri-Clamp Tees Tri-Clamp 24B7IWWMS Instrument Tee, Weld Run Tri-Weld Tees Tri-Weld 24B7MP Equal Tee, Tri-Clamp Tri-Clamp Tees Tri-Clamp 3B7MPS Short Outlet Tee, Tri-Clamp Tri-Clamp Tees Tri-Clamp 3B7RMP Reducing Tee, Tri-Clamp Tri-Clamp Tees Tri-Clamp 4B7RMPS Short Outlet Reducing, Tri-Clamp Tri-Clamp Tees Tri-Clamp 5B7RWWM Reducing Tee, Weld x Clamp Outlet Tri-Clamp Tees Tri-Clamp 26B7RWWM Reducing Tee, Weld x Clamp Outlet Tri-Weld Tees Tri-Weld 26B7RWWMS Short Outlet Reducing, Weld x Clamp Outlet Tri-Clamp Tees Tri-Clamp 27B7RWWMS Short Outlet Reducing, Weld x Clamp Outlet Tri-Weld Tees Tri-Weld 27B7RWWW Reducing Tee, Long Tangent Tri-Weld Tees Tri-Weld 25B7WMSW Tee, Weld x Clamp x Weld Outlet Tri-Clamp Tees Tri-Clamp 24B7WMSW Tee, Weld x Clamp x Weld Outlet Tri-Weld Tees Tri-Weld 24B7WWM Equal Tee, Weld x Clamp Outlet Tri-Clamp Tees Tri-Clamp 23B7WWM Equal Tee, Weld x Clamp Outlet Tri-Weld Tees Tri-Weld 23B7WWMS Short Outlet Tee, Weld x Clamp Outlet Tri-Clamp Tees Tri-Clamp 24B7WWMS Short Outlet Tee, Weld x Clamp Outlet Tri-Weld Tees Tri-Weld 24B7WWW Equal Tee, Long Tangent Tri-Weld Tees Tri-Weld 23B9MP Cross, Tri-Clamp Tri-Clamp Crosses Tri-Clamp 6B9MP Cross, Tri-Clamp Tri-Clamp Tees Tri-Clamp 6B9RWWWW Reducing Cross, Long Tangent Tri-Weld Crosses Tri-Weld 28B9WWWW Cross, Long Tangent Tri-Weld Crosses Tri-Weld 28BS14AM Weld Ferrule, Long Tangent Tri-Clamp Ferrules Tri-Clamp 7C24FCF Bolted Hanger with Threaded Stud Hangers Misc. Fittings 52D24FCF Bolted Hanger w/ PVC Insert Hangers Misc. Fittings 53D24FCF-PVC Insert Insert for D24FCF-PVC Hanger Hangers Misc. Fittings 53DC40 DC Gasket DC Gaskets Other Connections 40E24FCF Hanger w/ PVC Insert & Threaded Stud Hangers Misc. Fittings 53H-14W Ferrule H-Line Male Short H Line Ferrules Other Connections 41H-15W Ferrule H-Line Female Short H Line Ferrules Other Connections 41H-16A-14 H Line Male Cap H Line Caps Other Connections 41H25H Bevel Seat Wrench, short handle Wrenches Misc. Fittings 54

IndexBy Model

Model Description Family ProdType Page No.H25HA Bevel Seat Wrench, short double end Wrenches Misc. Fittings 54H40 H Line Gasket H Line Gasket Other Connections 41HDI-13UD HDI Clamp With Wing Nut HDI Clamps Other Connections 43HDI-14W Ferrule HDI Male Short HDI Ferrules Other Connections 42HDI-15W Ferrule HDI Female Short HDI Ferrules Other Connections 42HDI-16A-14 HDI Male End Cap HDI Caps Other Connections 42HDI-16A-15 HDI Female End Cap HDI Caps Other Connections 42HDI-40 HDI Gasket HDI Gaskets Other Connections 43L14A Plain Weld Ferrule Bevel Seat Ferrules Bevel Seat 34L14AJP JP Plain Weld Ferrule John Perry Ferrules Other Connections 44L14AM Tri-Clamp Weld Ferrule Tri-Clamp Ferrules Tri-Clamp 6L15A Threaded Weld Ferrule Bevel Seat Ferrules Bevel Seat 35L15ADC DC Threaded Weld Ferrule DC Ferrules Other Connections 40L15AJP JP Threaded Weld Ferrule John Perry Ferrules Other Connections 44L2C 90 - Weld x Threaded Bevel Seat Bevel Seat Bends Bevel Seat 20L2C 90 - Weld x Threaded Bevel Seat Tri-Weld Bends Tri-Weld 20L2CM 90 - Clamp x Weld Tri-Clamp Bends Tri-Clamp 19L2CM 90 - Clamp x Weld Tri-Weld Bends Tri-Weld 19L2F 90 - Weld x Plain Bevel Seat Bevel Seat Bends Bevel Seat 20L2F 90 - Weld x Plain Bevel Seat Tri-Weld Bends Tri-Weld 20L2S 90 - Weld Bend Tri-Weld Bends Tri-Weld 19L31 Concentric Reducer, No Tangent Tri-Weld Reducers Tri-Weld 30L32 Eccentric Reducer, No Tangent Tri-Weld Reducers Tri-Weld 31ST40 Snap Tite Bevel Seat Gasket Bevel Seat Gaskets Bevel Seat 37

Alfa Laval in brief.

Alfa Laval is a leading global providerof specialized products and engineeredsolutions. Our equipment, systems andservices are dedicated to helpingcustomers to optimize the performance oftheir processes. Time and time again. Wehelp our customers to heat, cool, separateand transport products such as oil, water,chemicals, beverages, foodstuff, starchand pharmaceuticals. Our worldwideorganization works closely with customersin almost 100 countries to help them stayahead.

Our U.S.-based sanitary group offers AlfaLaval and Tri-Clover fluid handling andheat transfer equipment. Since 1919, Tri-Clover has been the leading supplier ofprocessing equipment to the sanitary flowindustry in North America. Part of AlfaLaval since 1986, Tri-Clover’s sales andmarketing functions were consolidatedwithin the overall Alfa Laval organizationin December 2000, creating theundisputed global leader in this industry.Tri-Clover remains a key brand within AlfaLaval.

ESE00014EN 0210

How to contact Alfa LavalContact details for all countriesare continually updated on our website.Please visit www.alfalaval.comto access the information directly.

Sanitary and Biopharm - Flow Componentsflowcomponents.com/Brochure AlfaLaval/Fittings...

Documents

Transcript of Sanitary and Biopharm - Flow Componentsflowcomponents.com/Brochure AlfaLaval/Fittings...