SANDWICH PANEL CONTAINER TECHNICAL SPECIFICATIONS

PRODUCTION Special production sandwich panel living containers

MATERIAL Metal material between 2mm and 4mm + box profile

PRODUCTION DIMENSIONS

Container frame dimension

3600x1200x2500 mm(wxlxh)

METAL PARTS Zinc coated steel-DIN EN 10142-00

Building dimension after assembling

3600x12000x2500 mm(wxlxh)

CEMENT BOARD DIN EN 634-2-EQV-B1 Fire class resistant

Page no : 1

Package type Flatpack POLYSTYRENE FOAM (EPS) DIN EN 13163-E1 Fire class resistant

TECHNICAL DATA

Earthquake conditions

1st Degree earthquake conditions

TRANSMISSION COEFFICIENT OF EXTERNAL WALL

0,034 kcal/mh°C

Climate conditions

Suitable for 3rd climate zone

ROOF TRANSMISSION COEFFICIENT

0,034 kcal/mh°C

Snow load 100 Kg/m²FLOOR HEAT TRANSFER COEFFICIENT

K:0.68 kcal/mh°C

Wind speed 102 Km/hCHASSIS LOADING CAPACITY

200 Kg/m²

FLOOR SystemSpecial shaped metal materials with roolform and cutting/bend machines. Preparation is with welding in the Factory, and installation is with self tapping screw

Page no : 2

Floor coating 40mm and 30 dansite sandwich panel fixed to 10mm cement board

Bathroom Floor covering (Only included models)

2.5 mm thick PVC vinyl

Main floor covering

2.5 mm thick PVC vinyl

WALLS System 50mm thick 30mm kg/m3 Special shaped EPS filled sandwich panel

Outer surface covering

Ral 9006 electrostatic painted steel sheet.

Inner surface covering

Ral 9006 electrostatic painted steel sheet.

Wall Insulation

50 mm thick 30 kg/m³ polystyrene foam (EPS) E1 fire class fire resistant, full thermal insulation, healthy and safety is guaranteed by our materials.

Page no : 3

ROOF

Roof system 50mm thick 30kg/m3 sandwich panel with EPS insulation.

Roof insulation

50 mm thick 30 kg/m³ polystyrene foam (EPS) E1 fire class resistant, full thermal insulation, healthy and safety is guaranteed by our materials.

Outer surface covering

Ral 9006 electrostatic powder painted steel sheet.

Inner surface covering

Ral 9006 electrostatic powder painted steel sheet.

DOORS

External door Made of 40 mm thick sandwich panel. Frame is PVC profile

Internal door (Only included models)

American panel doors

Page no : 4

Bathroom door (Only included models)

American panel doors

WINDOWS

Main 90x110 cm PVC window. Windows are single wing and open toward inside

Frame PVC frames

Bathroom Window (Only included models)

60x40 cm PVC window. Windows are single wing and open toward upside

Glass 4+11+4 mm Double glazing

Page no : 5

PAINTING

Exterior Sandwich panel sheets are painted with Ral 9006 electrostatic powder paint

Metal parts All metal parts are painted with Ral 9005 electrostatic powder paint

ELECTRIC INSTALLATIONS

System On the plaster

Page no : 6

CablesElectric power 2000 W 220 Volt. Socket cable 3x2,5 NYM, Lightening cables 2x1,5 NYM TSE certified first class brands

Ventilation Only includedmodels)

Air ventilation for the Bathroom or Kitchen sink.

Lighting fixtures

TSE certified first class round shaped glob armatures

Plugs and switches

TSE certified first class switch and socket is available in each room. Fuse box and circuit breakeris included.

Page no : 7

SANITARY INSTALLATIONS (ONLY INCLUDED MODELS)

System On the plaster

Sanitary fittings

TSE certified first class brands

Closet &Shower Tray & Shower Curtain & Wash Basin & Paper Holder & Soap Holder & Mirror

TSE certified first class brands

Clean water pipes

TSE certified first class brands

Page no : 8

Waste water pipes

TSE certified first class brands

PACKAGE SystemThe corner beams, top and bottom frame, wall and roof panels, door and window, electricity and equipments will be collected as a flatpack box.

SHIPPING System The lifting operation will be completed via specially shaped brackets and columns.

Page no : 9