Sand Casting By. Introduction Sand casting is the oldest form of casting and is still widely used...

19
Sand Casting By

TAGS:

Transcript of Sand Casting By. Introduction Sand casting is the oldest form of casting and is still widely used...

Page 1: Sand Casting By. Introduction Sand casting is the oldest form of casting and is still widely used today. Mould core.

Sand CastingBy

Page 2: Sand Casting By. Introduction Sand casting is the oldest form of casting and is still widely used today. Mould core.

Introduction Sand casting is the oldest form of casting

and is still widely used today.

Mould core

Page 3: Sand Casting By. Introduction Sand casting is the oldest form of casting and is still widely used today. Mould core.

Materials Steel and aluminium are the metals most

commonly used.

SteelAluminium

Page 4: Sand Casting By. Introduction Sand casting is the oldest form of casting and is still widely used today. Mould core.

Features of sand casting Always made of metals e.g. Steel and

Aluminium. Split lines made from mould. Before product is dispatched product may

have runners, risers and feeders.

Feeder

Riser

Runner

Page 5: Sand Casting By. Introduction Sand casting is the oldest form of casting and is still widely used today. Mould core.

Uses of sand casting There are many things made by sand

casting E.G. Wall plaques, Nut Crackers, clamps.

Page 6: Sand Casting By. Introduction Sand casting is the oldest form of casting and is still widely used today. Mould core.

Process

1Mould

Page 7: Sand Casting By. Introduction Sand casting is the oldest form of casting and is still widely used today. Mould core.

2

Page 8: Sand Casting By. Introduction Sand casting is the oldest form of casting and is still widely used today. Mould core.

3Dolly

Page 9: Sand Casting By. Introduction Sand casting is the oldest form of casting and is still widely used today. Mould core.

4

Page 10: Sand Casting By. Introduction Sand casting is the oldest form of casting and is still widely used today. Mould core.

5Sprue Pins

Page 11: Sand Casting By. Introduction Sand casting is the oldest form of casting and is still widely used today. Mould core.

6

Page 12: Sand Casting By. Introduction Sand casting is the oldest form of casting and is still widely used today. Mould core.

7

Page 13: Sand Casting By. Introduction Sand casting is the oldest form of casting and is still widely used today. Mould core.

8

Page 14: Sand Casting By. Introduction Sand casting is the oldest form of casting and is still widely used today. Mould core.

9

Page 15: Sand Casting By. Introduction Sand casting is the oldest form of casting and is still widely used today. Mould core.

10

Page 16: Sand Casting By. Introduction Sand casting is the oldest form of casting and is still widely used today. Mould core.

11

Page 17: Sand Casting By. Introduction Sand casting is the oldest form of casting and is still widely used today. Mould core.

12

Page 18: Sand Casting By. Introduction Sand casting is the oldest form of casting and is still widely used today. Mould core.

13

Page 19: Sand Casting By. Introduction Sand casting is the oldest form of casting and is still widely used today. Mould core.

Sand Casting


Green sand mould

Green sand mould

Sand Casting Presentation

Sand Casting Presentation

Sand casting of metals - Gating system for sand casting mould

Sand casting of metals - Gating system for sand casting mould

Comparative study of eutectic Al-Si alloys manufactured by ... · comparative study was performed with two different casting techniques: permanent casting with steel mould and sand

Comparative study of eutectic Al-Si alloys manufactured by ... · comparative study was performed with two different casting techniques: permanent casting with steel mould and sand

1.2 CASTING PROCESSES E M C Sand Casting · 1.2 CASTING PROCESSES EXPENDABLE MOLD CASTING Sand Casting The next figure illustrates the basic production steps in sand casting: Patterns

1.2 CASTING PROCESSES E M C Sand Casting · 1.2 CASTING PROCESSES EXPENDABLE MOLD CASTING Sand Casting The next figure illustrates the basic production steps in sand casting: Patterns

Sand Casting

Sand Casting

Special Casting Processes. Shell Casting Investment Casting Centrifugal Casting Die Casting Ceramic Mould CO2 Moulding.

Special Casting Processes. Shell Casting Investment Casting Centrifugal Casting Die Casting Ceramic Mould CO2 Moulding.

H. Sand Casting Types Of Sand Mold Uses and Advantages Disadvantages of Sand Casting.

H. Sand Casting Types Of Sand Mold Uses and Advantages Disadvantages of Sand Casting.

2. Sand Casting

2. Sand Casting

sand casting - Foundry Gatefoundrygate.com/upload/artigos/sand_casting.pdf · Video of sand casting . .

sand casting - Foundry Gatefoundrygate.com/upload/artigos/sand_casting.pdf · Video of sand casting . .

ByA. Die casting B. Electroslag casting C. Centrifugal casting D. Precision casting 1. This process involves use of a mould made of dried silica sand and phenolic resin mixture 2.

ByA. Die casting B. Electroslag casting C. Centrifugal casting D. Precision casting 1. This process involves use of a mould made of dried silica sand and phenolic resin mixture 2.

Die Casting mold and samples · Die Casting mold and samples H T Mould (China) Limited. H T Mould (China) Limited. H T Mould (China) Limited. H T Mould (China) Limited. Die Casting

Die Casting mold and samples · Die Casting mold and samples H T Mould (China) Limited. H T Mould (China) Limited. H T Mould (China) Limited. H T Mould (China) Limited. Die Casting

Sand Casting and Aluminium Casting Practice

Sand Casting and Aluminium Casting Practice

Vol. 4, Issue 1, January 2015 Overall Productivity ... · ... die casting, investment die casting (wax pattern), centrifugal casting, permanent mould casting, sand casting, etc. out

Vol. 4, Issue 1, January 2015 Overall Productivity ... · ... die casting, investment die casting (wax pattern), centrifugal casting, permanent mould casting, sand casting, etc. out

1 Sand Casting

1 Sand Casting

M TECH: METALLURGICAL AND MATERIALS ENGINEERING · properties of powders and measurement techniques. ... Foundry techniques such as sand casting, Permanent mould casting, Investment

M TECH: METALLURGICAL AND MATERIALS ENGINEERING · properties of powders and measurement techniques. ... Foundry techniques such as sand casting, Permanent mould casting, Investment

Casting. Sand Casting is a process that has been around for over 5000 years. The process itself is fairly simple. A pattern is pressed into a sand mould.

Casting. Sand Casting is a process that has been around for over 5000 years. The process itself is fairly simple. A pattern is pressed into a sand mould.

Green Sand Casting

Green Sand Casting

Casting Defects - Sand Mold, Metal Casting

Casting Defects - Sand Mold, Metal Casting

Cupola Furnance, Sand Casting, CO2 Casting

Cupola Furnance, Sand Casting, CO2 Casting