SAMTEC Automotive Software & Electronics PRODUCT ... automotive software & electronics gmbh...

download SAMTEC Automotive Software & Electronics PRODUCT ... automotive software & electronics gmbh reserves

of 36

  • date post

    17-Mar-2020
  • Category

    Documents

  • view

    1
  • download

    1

Embed Size (px)

Transcript of SAMTEC Automotive Software & Electronics PRODUCT ... automotive software & electronics gmbh...

  • 2016

    SAMTEC Automotive Software & Electronics

    PRODUCT CATALOG

    AUTOMOTIVE www.samtec.de

  • Date: March 2016

    DISCLAIMER

    The information contained in this catalog corresponds to the technical status at the time of printing and is passed on with the best of our knowledge. The information in this catalog is in no event a basis for warranty claims or contractual agreements concerning the described products and may especially not be deemed as warranty concerning the quality and durability pursuant to Sec. 443 German Civil Code. samtec automotive software & electronics gmbh reserves the right to make any alterations to this catalog without prior notice. The actual design of products may deviate from the information contained in the catalog if technical alterations and product improvements so require. In any cases, only the proposal made by samtec automotive software & electronics gmbh for a concrete application or product will be binding. All mentioned product names are either registered or unregistered trademarks of their respective owners. Errors and omissions excepted. This catalog has been made available to our customers and interested parties free of charge. It may not, in part or in its entirety, be reproduced in any form without our prior consent. All rights reserved.

    CONTACT

    samtec automotive software & electronics gmbh Einhornstr. 10, D-72138 Kirchentellinsfurt - Germany Phone +49-7121-9937-0 Telefax +49-7121-9937-177 Internet www.samtec.de E-mail info@samtec.de

    LEGAL NOTICE

    samtec automotive software & electronics gmbh Managing directors: René von Stillfried, Dr. Wolfgang Trier Registered office: Kirchentellinsfurt Commercial register: Stuttgart, HRB 224968

    2

    PUBLICATION DETAILS

  • Dear readers, Many of you already know us! You deploy electronic control units, we provide you with the diagnostic solutions. Whether for ECU networks in vehicles, for test benches or for ECU production, we offer you the right products and expertise.

    Our customers are mainly OEM and ECU manufacturers in the automotive industry. They deploy our hard- and software products in development departments, use our residual bus simulations with concurrent diagnostics at engine test benches or assembly inspection lines, but also for holistic WLAN-based production lines and even to a complete aftermarket service tester.

    Since the merger with the Softing AG, our customers not only appreciate our growth as a company, but mainly our unique innovative product lines and our broad know-how in the automotive segment.

    With combined forces, together with our parent company, we are currently developing new products in the area of software as well as in a new concerted hardware portfolio. Our main focus here is on our expertise in the commercial vehicle sector but also in the production of vehicles and ECUs.

    As confirmed by our growth, our customers are confident that our tools and solutions can be holistically applied in all areas for development, production and service departments. The benefits of a single tool chain in the automotive segment of the Softing AG have been expanded through the close cooperation with our sister companies. Especially convincing to our customers and employees are the interlocking solutions of customized software applications, diagnostic run-time systems and optimized hardware products for all diagnostic use cases.

    We are looking forward to your visit!

    Yours René von Stillfried Managing director, samtec automotive software & electronics gmbh

    Kirchentellinsfurt, March 2016

    3

    PREFACE

  • 4

  • Diagnostics DTS .............................................................................................22 samDia ........................................................................................24 Softing TDX .................................................................................26 OTX Studio ..................................................................................28

    VCF ..............................................................................................18 VCF Features and Modules ........................................................21

    Communication Technology VIN|ING 1000 ...............................................................................8 HSC Family ..................................................................................10 HSX Family ..................................................................................12 HSX Modules ..............................................................................14 HSX Heavy Duty ..........................................................................15 Resident Block Sequencer ..........................................................16 samPDU API ................................................................................17

    Product Overview Hardware Features .......................................................................6 Supported Protocols ....................................................................7

    Test Systems Electric Testing ...........................................................................29

    Measurement Technology SMT .............................................................................................30 μ-Series .......................................................................................31

    Engineering Services EPTS ...........................................................................................32 samtec expertise ........................................................................33

    5

    TABLE OF CONTENT

  • HARDWARE FEATURES VIN|ING 1000 HSC HSX HSX HD

    FlexRay/Controller - - up to 4 -

    CAN High-Speed/Channels up to 2 up to 4 up to 8 1

    CAN Fault-Tolerant/Channels 1* 1* up to 5 -

    CAN Single Wire/Channels - - up to 5 -

    CAN Truck to Trailer/Channels - - up to 3 -

    K-Line ISO 9141/Channels 2 up to 4 2 2

    LIN/Channels 1 - 2 -

    SAE J1708 / J1587 - -

    Datalogger - -

    MVCI PDU-API

    SAE J2534 Pass-Thru

    USB Interface

    Ethernet Interface - -

    WLAN Interface - -

    DoIP - -

    SD Card Slot - - -

    Internal Storage* - - -

    Digital I/O up to 2 up to 2 3 3

    Analog Inputs up to 2 up to 2 3 3

    Firmware Update

    Rugged Casing

    Integrated OBD Connector - - -

    Hardware Features

    * = optional

    COMMUNICATION TECHNOLOGY

    6

  • PROTOKOLLE VIN|ING 1000 HSC HSX HSX HD

    CAN Analyzer 1 1 1 1

    CAN Direct UDS (ISO 14229) T T T/S T/S KWP 2000 on CAN (ISO 14230-3 on ISO 15765-2) T T T/S T/S ISOTP (ISO 15765-2) GMLAN X4400 T T T/S T/S SAE J1939 TP 1.6 T T T/S T/S TP 2.0 T T T/S T/S CCP T T T T XCP on CAN T T T/• T/•

    FLEXRAY FlexRay Direct UDS on AUTOSAR FrTP T/S UDS on ISO 10681-2 T/S UDS on OEM TP T/S AUTOSAR FrTp ISO 10681-2 XCP on FlexRay T/•

    K-LINE Analyzer UART Direct T KWP 2000 on K-Line (ISO 14230-3 on ISO 14230-2) T T T/S T KW 500 T T T T KW 71 / KW 1281 T T T/S T CARB T T T/S T DS2 • • • • H99B • • • • FREE • • • •

    OTHER J1708 / 1587 LIN 1.3 LIN 2.0 LIN 2.1 UDS on LIN UDS on Ethernet (DoIP, ISO 13400) T • XCP on Ethernet • Ethernet UDP

    BLOCK SEQUENCER Resident •

    = Feature available T = Tester (Stimulator) available S = Simulator available

    • = Feature planned 1 = The CAN analyzer function is operated

    through the CAN direct driver.

    Software interfaces The standardized D-PDU API (ISO 22900-2) supports the most important communication protocols: UDS (ISO 14229), KWP 2000 (ISO 14230, ISO 15765) and SAE J1939. The VCI can also be used as an alternative Pass-Thru device in accordance with SAE J2534. Together with the diagnostic tool set DTS from Softing, it is possible to implement a complete solution in accordance with MCD-3D standard ISO 22900-3 with ODX technology.

    Supported Protocols

    COMMUNICATION TECHNOLOGY

    7

  • VIN|ING 1000 Compact base interface (VCI) for vehicle electronics

    The sturdy metal housing of the VIN|ING 1000 VCI is designed for harsh manufacturing and repair shop environments as well as for customer-specific projects at ECU manufacturers. This VCI is particularly suitable for mobile service applications thanks to its compact design and the fact that it offers Blue- tooth or USB as the interface to the PC and CAN and K-Line as the interface to the vehicle.

    DIAGNOSTIC SYSTEM ARCHITECTURE The samtec VCIs are suitable for operation with the standard- ized D-PDU API and with the VCI Communication Framework (VCF). These interfaces enable complete and transparent inte- gration into customer-specific diagnostic applications (OEM/ TIER1) – also in combination with the Softing DTS diagnostic tool set (ODX/OTX).

    ▲ Fig.: VIN|ING 1000

    AREAS OF APPLICATION ■ Mobile applications for vehicle development

    and service (aftermarket) ■ Fast and secure ECU programming ■ Customer specific variants for diagnostic or service

    testers with own branding ■ Designed for automobiles and utility vehicles

    BENEFITS ■ Modern, cost-effective base VCI ■ Multiple independent communication channels:

    CAN, K-Line and LIN ■ Real time execution of vehicle bus protocols directly

    on the interface guarantees fast reaction time and reliable real time behaviour independent from the PC operat