GOOD-Sample VLSI Interview Questions With Answers for a Fresher Part-1 - Technology@Tdzire
sample ques vlsi
-
Upload
subir-maity -
Category
Documents
-
view
212 -
download
0
description
Transcript of sample ques vlsi
1) Design a CMOS inverter circuit of following parameters: VT0n= 0.6V, µnCox= 60µA/V2, (W/L)n= 8,
VT0p = -0.7V, µpCox = 25µA/V2, (W/L)p=12.Supply voltage = 3.3 volt. Channel length of both
transistor is 0.8µm. Determine (Wn/Wp) ratio so that switching threshold voltage of inverter circuit
Vth=1.4 volt.
2) A company has access to a CMOS fabrication process with the following device parameters listed
below:
µnCox=120 µA/V2, µpCox=60 µA/V
2, L=0.6µm for both NMOS and PMOS, VT0n=0.8V, VT0p= -1.0V,
Combined load capacitance value= 300fF and Wmin= 1.2µm.Design a CMOS inverter by determining
channel width Wn and Wp of NMOS and PMOS transistors such that propagation delay times tPHL ≤
0.2ns and tPLH ≤ 0.15ns.
3) Find the region of operation for the transistor M4 and M5 in the given configuration. All the
transistors have identical sizes. Assume VDD = 2.5 V, and VTn = 0.4 V, W = 1μm, L = 0.25 μm,
kn’ = 115 μA/V2.