Salient Projects
-
Upload
ramakrishna -
Category
Documents
-
view
143 -
download
3
Transcript of Salient Projects
Founded in 1941 by Dr. Harry A. Kuljian
Multi-Discipline Engineering/Architect firm
Arthur H. Kuljian, the founder’s son, is current President
Have Been in the Consulting Engineering Service for Over 50 Years
Main Area of Expertise Continues to be in Energy and Power Plant Engineering
2
Feasibility Study
Master Planning
Preliminary Design
Design Development
Detailed Engineering
Preparation of Construction
Specs & Construction Drawings
Bid Document Preparation and Bid Evaluation
Vendors’ Drawings Review
Inspection / Quality Control
Project Management
3
Preparation/Review of As-Built Drawings
Compilation of O&M Manuals
Warranty Period Services
Shop Inspection
Expedition
Assist in Contract Negotiations & Contract Document Preparation
Supervision of Construction, Start-Up, Testing and Commissioning
4
Alexandria, Egypt
Manama, Bahrain
Riyadh, Saudi Arabia
Kuljian (India) Ltd., India
Amman, Jordan
5
CATEGORY
6
STRENGTHPhiladelphiaUSA Office
STRENGTHSaudi, Kuwait,
Jordan & Egypt Offices
MECHANICAL
CIVIL / STRUCTURAL
ELECTRICAL
ARCHITECTURAL
C & I
CADD DESIGN / DRAFTSMEN
PROCESS
OTHERS
23
14
19
4
10
23
12
37
14
20
7
4
82105TOTAL
STRENGTHIndia Offices
81
85
49
9
12
14
5
255
Power Generation
Cogeneration
Desalination
T & D, Substations, Energy Control Centers
Air Quality Control Systems
7
8
1. Alghanim International General Trading and Contracting Co., Ltd., Kuwait
- 1500 MW Az-Zour South Combined Cycle Power Plant Project with two Combined Cycle Modify of 740 MW each, Kuwait
- Basic and Detail Engineering and Procurement Assistance Services
2. Alghanim International General Trading and Contracting Co., Ltd., Kuwait
- 5 x 160 MW Az-Zour Gas Turbine Emergency Power Plant Project 2008, Kuwait - Basic and Detail Engineering and Procurement Assistance Services
9
3. Wygen1 Thermal Power Plant, Unit 3 Project,
Wyoming
-Babcock & Wilcox, EPC Contractor
-1x90 MW Coal Fired Thermal Power Plant -Basic and Detailed Engineering and Procurement Assistance
Services
4. Wygen2 Thermal Power Plant, Unit 4 Project, Wyoming
- Black Hills Generation, Inc.- 1 x 90 MW Coal Fired Thermal Power Plant - Basic and Detailed Engineering and Procurement Assistance
Services
10
5. OEM/EPC CONTRACTOR, USA
- 9 x Frame 9FA Single Shaft Combined Cycle Power Projects in four (4) different sites in China -Basic and Detailed Engineering and Procurement Assistance Services
6. OEM/EPC CONTRACTOR, USA
- 3 x GE Frame 9FA Ras Abu Fontas Gas Turbine Power / Desalination Project in Qatar - Basic and Detailed Engineering and Procurement Assistance Services
11
7. OEM/EPC CONTRACTOR, USA
- 2160 MW (4 x 207FA) Combined Cycle Power Project, Pusan, South Korea
- Basic and Detailed Engineering and Procurement Assistance Services
8. OEM/EPC CONTRACTOR, USA
- 2 x 370 MW Combined Cycle Cogeneration Project using GE Frame 9FA Gas Turbine Units, Norway - Basic and Detailed Engineering and Procurement Assistance Services
12
9. OEM/EPC CONTRACTOR, USA
- 1 x Frame 9FA Single Shaft Combined Cycle Power Project in Italy
- Basic and Detailed Engineering and Procurement Assistance Services
10. Saba Thermal Power Project, Pakistan
- Babcock & Wilcox, EPC Contractor - 1x125 MW Oil Fired Thermal Power Plant - Basic and Detailed Engineering and Procurement Assistance Services
13
11. Samra Phase I Combined Cycle Power Project, Jordan
- Samra Electric Power Generating Company
- 300 MW Combined Cycle Plant with 2 x 100 MW Gas Turbine and 1 x100 MW Steam Turbine.
- Design, Engineering, Procurement Assistance, Engineering Review,Shop Inspection, Supervision of Construction, Start-Up, Testing and Commissioning
12. Rehab Power Plant Combined Cycle Project, Jordan - Central Electricity Generating Company, Client- 300 MW Combined Cycle Plant with 2 x 100 MW Gas Turbine and 1 x100 MW Steam Turbine.
- Design, Engineering, Procurement Assistance, Engineering Review,Shop Inspection, Supervision Contractor, Start-Up, Testing and Commissioning
14
13. Gama Power Systems, Tynagh, Ireland
- 400 MW Tynagh Combined Cycle Power Project, Ireland
- Basic and Detailed Engineering and Procurement Assistance
Services
14. Daelim Industrial Co., Ltd., Korea
- 170 MW BASF-YPC Combined Cycle Power Plant in Nanjing,
China withThree (3) Gas Turbine Generating (GE 6581B),
Three (3) HRSGs, One (1)xtraction/Induction/Conducting Type
Steam Turbine - Basic and Detailed Engineering Review and Procurement Asistance Services
15
15. Egyptian Electricity Authority, Egypt
- Damietta Combined Cycle Plant 3 x 300 MW capacity each
module consisting of 2 gas turbines of each rated around 100
MW and 1 steam turbine around 100 MW, Egypt
- Basic and Detailed Engineering and Procurement Assistance Services
16. Daelim Engineering Co., Ltd., Seoul, Korea
- 330 MW Kayakulam Combined Cycle Power Plant in Kayakulam, Kerala, India
- Basic and Detailed Engineering and Procurement Assistance
Services
16
17. National Thermal Power Corporation, India
- 630 MW Gandhar Combined Cycle Power Station including 3 Gas
Turbine Units each about 150 MW, 3 HRSGS & 1 Steam Turbine
Generator
- Basic and Detailed Engineering and Procurement Assistance Services
18. Samra Phase II Combined Cycle Power Project, Jordan
- Samra Electric Power Generating Company - 300 MW Combined Cycle Plant with 2 x 100 MW Gas Turbine and 1 x100 MW Steam Turbine.- Design, Engineering, Procurement Assistance, Engineering Review,
Shop Inspection, Supervision of Construction, Start-Up, Testing and Commissioning
17
19. DVC, Services India, India – Services provided for GE, USA Turnkey Contractor - Maithon Gas Turbine Project 3 x 30 MW in India with Provision for Conversion to Combined Cycle Plant, India - Basic and Detailed Engineering Review and Procurement Assistance Services
20. GSES, EPC Contractor, India
- 230 MW Combined Cycle Power Project in Samalkot, A.P., India
- Basic and Detailed Engineering Review and Procurement Assistance
Services
18
21. AES Kelamitissa, Sri Lanka- 160 MW Combined Cycle Power Project in Colombo, Sri Lanka - Basic and Detailed Engineering and Procurement Assistance
Services
22. Rehabilitation of Shoaiba I and Shuqaiq Thermal Power Plant,
Saudi Arabia
- Saline Water Conversion Corporation
- Retrofitting of Dust Collection Equipment and other systems to burn heavy fuel oil
- Review of Detailed Design and Supervision of Construction, Start-Up, Testing and Commissioning
19
23. Syracuse Combined Cycle Cogeneration Project, New York
- Kamine Development Corporation
- 79 MW Combined Cycle Plant using 55 MW Gas Turbine and 24 MW Extraction Condensing Steam Turbine for Supplying Steam to New York State Fairground to Meet the Heat Demand
- Review of Basic and Detailed Engineering Work
20
24. Beaver Falls Combined Cycle Cogeneration Project, New York
- Kamine Development Corporation
- 79 MW Combined Cycle Power Plant with 55 MW Gas Turbine and 24 MW Extraction Condensing Steam Turbine - Review of Basic and Detailed Engineering Work
25. Qurrayah Thermal Power Station Phase II, SCEC, Eastern Region Saudi Arabia
- Saudi Consolidated Electric Company, Saudi Arabia- 2x625 MW Crude Oil/Natural Gas Fired Thermal Power- 3x1.06 MGD MSF Desalination Plant for Plant Make-Up Water- Review of Detailed Design & Drawings, Shop Inspection, Supervision
of Construction, Start-Up, Testing & Commissioning
21
26. Swedieh Power Station for C. Itoh Ltd., Syria
- 5x30 MW (site rated, GE Frame 6) Gas Turbine Project - Basic and Detailed Engineering and Procurement Assistance
27. Damage Assessment Study & Detailed Cost Estimate
- 350 MW Coal Fired Power Plant at Ford Rouge, Michigan Plant - Recent Biggest Industrial Loss Claim in United States
22
28. Riffa’a Phase I Gas Turbine Power Plant Rehabilitation, Bahrain
- Ministry of Electricity
- 5x50 MW Siemens Gas Turbine Units
- Rehabilitation of I&C Systems, Excitation and Starting Systems
- Repair of Stack Foundation - Design, Engineering, Procurement Assistance, Engineering Review, Shop Inspection, Supervision of Construction, Start-Up, Testing and Commissioning
23
29. Singrauli Thermal Power Project, India - National Thermal Power Corporation (World Bank funded)
- 2x500 MW Coal Fired Thermal Power Plant- Design, Engineering and Procurement Assistance
30. KHIC, Korea - Hallim Gas Turbine Project of 30 MW Capacity in Korea- Basic and Detailed Engineering and Procurement Assistance
Services
24
31. KEMCO/James River Corporation, USA
- Milford Combined Cycle Cogeneration Plant with 30 MW Gas Turbine and 230,000 lbs/hr Steam in Waste Heat Recovery Boiler for Process use and 5 MW Steam Turbine Operation in Combined Cycle Mode in Milford, New Jersey, USA - Basic and Detailed Engineering and Procurement Assistance Services
32. General Electric, USA - Combined Cycle Power Project in the USA for a Third Developer / Turnkey Contractor in the USA. The Project Consisted of 79 MW (GE Frame 7) Gas Turbine and 27 MW Steam Turbine Extraction Condensing Type. - Basic and Detailed Engineering and Procurement Assistance Services
25
33. Pratt & Whitney Windsor, CT, USA - Reference Plant Design using Pratt & Whitney FT-8 Units (25 MW each) for Simple and Combined Cycle Power Generation
- Basic and Detailed Engineering and Procurement Assistance Services
26
34. Ministry of Electricity and Water, Muscat, Sultanate of Oman - Rusail Power Station Phase II Extension in Sultanate of Oman with 3 x 100 (ISO) Gas Turbines (GE Frame 9) and one (1) 106 MW Condensing Steam Turbine using Air Cooled Condenser, 3 Waste Heat Recovery Boilers each Generating 150t/HR., HP Steam at 900 PSIG, 900F and 15 T/hr L.P. Steam, Oman - Design, Engineering, Procurement Assistance, Engineering Review, Shop Inspection, Supervision of Construction, Start-Up, Testing and Commissioning
27
35. Public Electricity Corporation, Yemen - 300 MW Marib Phase I Gas Turbine Power Project, Yemen
- Design, Engineering, Procurement Assistance, Engineering Review, Shop Inspection, Supervision of Construction, Start-Up, Testing and Commissioning
36. Hidroelectrica del Cantabrico, S.A., Spain
- Castejon 400 MW Combined Cycle Power Project in Navarra, Spain. The project includes 2 x 130 MW Gas Turbines and 1 x 140 MW Steam Turbine - Design, Engineering, Procurement Assistance, Engineering Review, Shop Inspection, Supervision of Construction, Start-Up, Testing and Commissioning
28
37. Public Electricity Corporation, Yemen
- 400 MW Marib Phase II Gas Turbine Power Project, Yemen - Design, Engineering, Procurement Assistance, Engineering Review, Shop Inspection, Supervision of Construction, Start-Up, Testing and Commissioning
38. Public Electricity Corporation, Yemen
- 400 MW Mabar Gas Turbine Power Project in Yemen - Design, Engineering, Procurement Assistance, Engineering Review, Shop Inspection, Supervision of Construction, Start-Up, Testing and Commissioning
29
39. Shoaiba Stage II, Phase I, Thermal Power Plant Project, Saudi Arabia
- Saudi Electricity Company – Western Region
- 3x400 MW Oil Fired Thermal Power Plant - Review of Detailed Design & Drawings, Shop Inspection, Supervision of Construction, Start-Up, Testing & Commissioning
40. Shoaiba Stage II, Phase II Thermal Power Plant Project, Saudi Arabia
- Saudi Electricity company - Western Region- 3 x 400 MW Oil Fired Thermal Power Plant- Review of Detailed Design & Drawings, Shop Inspection,
Supervision of Construction, Start-Up, Testing & Commissioning
30
41. Al-Jubail Phase II Power/Desalination Project, Saudi Arabia
- Saline Water Conversion Corporation- 10 x 137 MW Oil/Natural Gas Fired Thermal Power- 40 x 6.25 MIGD MSF Desalination- Design, Engineering, Procurement Assistance, Engineering Review,
Shop Inspection, Supervision of Construction, Start-Up, Testing and Commissioning
31
42. Combined Cycle Plant, Hawaii
- IPP Client- 200 MW Cogeneration Project: 2 x 75 MW Gas Turbines and 1x50 MW Steam Turbine, 2 Unfired Multi-Pressure Heat Recovery Boilers
- Review of Detailed Design & Drawings, Supervision of Construction, Start-Up, Testing & Commissioning
43. QATALUM COMBINED CYCLE PLANT, Qatar- Doosan, Korea (EPC contractor)- 1200 MW Combined Cycle Plant- Basic and detailed engineering, procurement assistance and site
supervision
32
The Kuljian Corporation has built up substantial experience in power plant engineering, having been responsible for over 300 electric generating plants completed or in progress, with a total capacity exceeding 30,000 MW.
Highlights of Kuljian's power generating experience:
Steam Power Plants (completed or in progress)
• 4 Units rated at 600 MW• 4 Units rated at 500 MW• 35 Units rated 200 through 499 MW • 63 Units rated 100 MW through 199 MW• 100 Units rated up to 99 MW
33
Boiler and Heating Installations
• 40 Units up to 25,000 lbs/hr• 160 Units 25,000 to 50,000 lbs/hr• 140 Units 51,000 to 100,000 lbs/hr• 100 Units over 100,000 lbs/hr
Combustion Turbine Installations
• 20 Units over 50 MW• 50 Units rated 20 MW through 49 MW• 45 Units rated up to 19 MW
34
Fuel Handling/Combustion Systems
The above power generation systems can be classified by their primary fuels:
- Coal Fired Systems - Lignite, Anthracite, Bituminous, Sub-bituminous, Culm - Oil Fired Systems - All liquid fuels including crude oil - Gas Fired Systems
GE International Power Systems
ABB Energy Ventures ABB Susa American Cyanamid ARCO Armstrong World Industries Atlantic Electric Babcock & Wilcox Boeing Defense & Space Bristol-Myers Squibb Bucknell University Ciba Geigy City of Vineland
College of New Jersey Congoleum Corporation Conoco Global Power Delmarva Power and Light DGS Drexel University Ewing Cole General Chemical Gilbane IUP Kamine Kraft Lehigh University
35
Marsulex Mobil Oil Nabisco Ogden Energy Pfizer PECO PA Department of
Transportation Rutgers University Siemens Westinghouse Sterling Winthrop Stevens Institute of
Technology Synergics Tastykake
Temple University Turbo Power & Marine US State Department University of Pennsylvania Victor F. Weaver, Inc. Western Farmers Electric
Cooperative Westinghouse Electric
Corporation Wyeth-Ayerst Wyeth-Lederle Yale University
36
African Development Bank Daelim Engineering, Korea Egyptian Electrical Authority Halla Engineering and Heavy
Industries, Korea Itochu Jordan Electricity Authority Korea Construction Company Maharashtra State Electricity
Board, India Ministry of Electricity &
Water, U.A.E. Ministry of Electricity &
Water, Oman
Ministry of Electricity & Water, Bahrain
Ministry of Finance & Economic Planning, Sudan
National Thermal Power Corporation, India
Syrian Public Establishment of Electricity for Generation & Transmission
Saline Water Conversion Corporation, Saudi Arabia
Saudi Consolidation Electricity Company
Electricity Generating Authority of Thailand
37
38
- Primavera & Primavision are our computerized network scheduling and report generation programs.
The System Allows:
- Developing Bar Chart and Logic Networking broken down to any level of detail.
- Determining the actual progress and forecasting of latest completion dates.
- Maintaining and updating the database for drawings and documents
- Monthly progress report including initial preparation and subsequent updating of project schedule
Mechanical Engineering
Electrical Engineering
Instrumentation and Control Engineering
Civil and Structural Engineering
Post-Contract Services
Site Placement of Engineers
39
40
• Heat Balance and Optimization using State of the Art Software Packages
• Development and Preparation of Plot Plan and Equipment Arrangement
• System Design and Sizing Calculations
• Preparation of P&ID’s for Major Systems like Fuel Gas, Fuel Oil, Steam, Feed, Condensate, Cooling Water, De-Mineralized Water, Compressed Air, Waste Effluent, Fire Protection, etc.
• Selection/Sizing, Specification and Bid Evaluation of Mechanical Equipment Pertaining to Balance of Plant Scope
41
• Development and Preparation of Piping and Equipment General Arrangements, Piping Isometrics Showing Support and Hardware
• Surge/Transient Analysis of Major Fluid Systems
• Flexibility Analysis of Piping and Code Compliance Report
• Pipe Support System Design and Detail Drawings of Hangers/Supports
• Preparation and Updating of Bill of Material for Piping, Valves, Specialties and Other Hardware
• Insulation and Painting Schedule
• Plant HVAC and Plumbing
42
• Electrical System Design, Load Flow & Short Circuit Analysis
• Preparation of Electrical Equipment Layout for Power Island and Switchyard
• Grounding Design and Details
• Cable Sizing, Cable Schedule and Interconnection Engineering for Power Island and BOP
• Electrical Equipment Selection & Sizing \ Preparation of Procurement Specification and Bid Evaluation
• Lighting Design and Calculation
• Relay Setting and Coordination
Electrical Engineering
43
• Preparation of Logic Diagrams and Control Loop Diagrams for Power Island Systems and Supporting Utilities for Analog and Digital Controls
• Preparation of DCS I/O List and Detail Instrument List for the Plant
• Selection, Preparation of Specification and Bid Evaluation of DCS, Control Valves, Measuring Devices, Process Transmitter and Switches, CEMS, SWAS, etc.
• Technical Review of all Subcontract Packages including Configuration Drawings for DCS
• Coordination to Interface GTG, STG, HRSG, Boilers & BOP Equipment with Plant DCS
• Preparation of Layout Drawings for Control Equipment
• Preparation of Installation, Cable Schedule, JB Schedule, etc.
Technical Review of Sub-Contractor’s Package
Field Assistance During Mechanical Erection and Commissioning
As-Built Drawings and Documents
Shop Inspection, Testing and Quality Assurance
Quality Assurance Services During Erection
Project Schedule Monitoring
46
Experienced Project Team
Corporate Commitment
Satisfied Clientele
Repeat Orders
Trust
47
The Kuljian CorporationEngineers • Architects • ConsultantsPhiladelphia, Pennsylvania
48