Safran Risk 7
Transcript of Safran Risk 7
![Page 1: Safran Risk 7](https://reader030.fdocuments.net/reader030/viewer/2022012710/61aa5db6c71a847f1101bbbf/html5/thumbnails/1.jpg)
1
Safran Risk 7.2
SAFRAN RISK INSTALLATION GUIDE.
Copyright © 1999, 2018 Safran Software Solutions AS. All Rights reserved.
Accuracy Although every effort have been made to ensure the accuracy and completeness of this document, no
warranty, expressed or implied, is made by Safran Software Solutions AS as to the accuracy of this
publication and the features or the applicability of techniques suggested.
Copyright Notice The information provided in this manual is for informational purposes only. It may change without notice
and does not represent a commitment as to merchantability or fitness for a particular purpose by Safran
Software Solutions AS.
Safran Software Solutions provide the software described in this manual AS under a Safran License
Agreement. The software may only be used in accordance with the terms of the license agreement.
No part of this manual may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, for any purpose without the expressed written
permission of Safran Software Solutions AS.
Safran is a registered trademark of Safran Software Solutions AS.
All other trademarks are property of their respective holders.
Introduction
The purpose of the Installing Safran Risk is to familiarise you with the process of installing Safran Risk
and the structure of Safran Risk folders and file structure.
This guide is written to assist support personnel, application developers, and system integrators.
![Page 2: Safran Risk 7](https://reader030.fdocuments.net/reader030/viewer/2022012710/61aa5db6c71a847f1101bbbf/html5/thumbnails/2.jpg)
2
Installation
General Safran Risk 7.2 installation is a basic msi installation created with InstallShield.
This guide performs a normal set up with the executable file, but informs you where to pick up the clean
msi-package.
Requirements Operating System:
Windows 7 (64 bit), Windows 8 (64 bit), Windows 10 (64 bit)
Processor: 2 GHz or higher
Memory: minimum 4 GB RAM, recommended 8GB
Storage: 1GB available disk space on local hard disk for local installations.
Microsoft SQL Server 2012, Microsoft SQL Server 2014 or
Microsoft SQL Server 2012 Express SP1 LocalDB (x64) (Included in Safran Risk installation package)
Microsoft .Net 4.5 (Included in Safran Risk installation package)
Database drivers.
Microsoft Native Client 2012 (64bit) is required when connecting to a Microsoft SQL database.
(Included in Safran Risk installation package)
Administrative privileges:
The installation must be done with Admin rights on the client computer.
![Page 3: Safran Risk 7](https://reader030.fdocuments.net/reader030/viewer/2022012710/61aa5db6c71a847f1101bbbf/html5/thumbnails/3.jpg)
3
Instructions for existing Safran Risk Pre-release users
Prior to installing Safran Risk it is very important that any users who have installed a pre-release version
of Safran Risk follow these instructions:
• Export any project data that you would like to keep.
• Uninstall the existing installation from Add/Remove Programs
• Manually rename or delete the following database files from the application data folder
C:\Users\[User Name]\AppData\Roaming\Safran\Risk\SafranRisk.mdf &
C:\Users\[User Name]\AppData\Roaming\Safran\Risk\SafranRisk_log.ldf.
If you don't remove these database files you will get a Database connection error when running
Safran Risk, if this happens uninstall again from Add/Remove Programs, remove the above
database files and install again.
• Check the installation folder had been removed (by default C:\Program Files (x86)\Safran
Software Solutions\Safran Risk), if it hasn’t been removed either rename or delete this folder
before proceeding.
• Install the new Safran Risk Installation.
![Page 4: Safran Risk 7](https://reader030.fdocuments.net/reader030/viewer/2022012710/61aa5db6c71a847f1101bbbf/html5/thumbnails/4.jpg)
4
Installing Safran Risk with local database Safran Risk uses InstallShield from Flexera Software for automatic software distribution and installation.
Follow these instructions if you are installing a copy of the Safran Risk software.
To install:
1. Open Windows Explorer and browse for the Safran installation files
2. Run the installation file
3. The installation checks if you have MS SQL Native client and MS SQL Server 2012 Express
installed. If they are not click Install
4. Click Next to start installing Safran Risk
NOTE: During the installation of SQL Server the machine may reboot itself before continuing
the installation, this is a normal part of the SQL Server installation. The Safran Risk installation
will continue within a short while of the machine being restarted.
![Page 5: Safran Risk 7](https://reader030.fdocuments.net/reader030/viewer/2022012710/61aa5db6c71a847f1101bbbf/html5/thumbnails/5.jpg)
5
5. Choose if you want to install a Personal Database, and if so, whether you want to include Sample
data or if you want Server Database. If you choose Include Sample Data you would get a sample
project and a sample risk setup. If you uncheck Include Sample Data an empty database file will
be installed. Note: This dialog will not be displayed if you are updating from a previous version.
![Page 6: Safran Risk 7](https://reader030.fdocuments.net/reader030/viewer/2022012710/61aa5db6c71a847f1101bbbf/html5/thumbnails/6.jpg)
6
6. Accept the license agreement and click Next
![Page 7: Safran Risk 7](https://reader030.fdocuments.net/reader030/viewer/2022012710/61aa5db6c71a847f1101bbbf/html5/thumbnails/7.jpg)
7
MSI Installation If you want to deploy Safran Risk with an msi package, you need to browse to
“C:\Users\YOURACCOUNT\AppData\Local\Downloaded Installations”
In one of the folders with a cryptic numeric name, and todays date, you will find Safran Risk.msi file.
Copy and paste this file to a location for further packaging.
7. Choose where to install Safran Risk, default is
C:\Program Files (x86)\Safran Software Solutions\Safran Risk\
Click Next.
![Page 8: Safran Risk 7](https://reader030.fdocuments.net/reader030/viewer/2022012710/61aa5db6c71a847f1101bbbf/html5/thumbnails/8.jpg)
8
8. Click Install or follow instructions.
9. Safran Risk installs.
![Page 9: Safran Risk 7](https://reader030.fdocuments.net/reader030/viewer/2022012710/61aa5db6c71a847f1101bbbf/html5/thumbnails/9.jpg)
9
10. When complete, click Finish
![Page 10: Safran Risk 7](https://reader030.fdocuments.net/reader030/viewer/2022012710/61aa5db6c71a847f1101bbbf/html5/thumbnails/10.jpg)
10
Installing Safran Risk – Using a MS SQL Server Database Follow these instructions if you are installing a copy of the Safran Risk software when you want Safran
Risk to use a Microsoft SQL Server Database.
Pre-requisites:
1. An empty SQL Server database must be created for the installation to connect to
To install:
1. Open Windows Explorer and browse for the Safran installation files
2. Run the installation file
3. The installation checks if you have MS SQL Native client and MS SQL Server 2012 Express
installed. If they are not click Install
4. Click Next to start installing Safran Risk
NOTE: During the installation of SQL Server the machine may reboot itself before continuing
the installation, this is a normal part of the SQL Server installation. The Safran Risk installation
will continue within a short while of the machine being restarted.
![Page 11: Safran Risk 7](https://reader030.fdocuments.net/reader030/viewer/2022012710/61aa5db6c71a847f1101bbbf/html5/thumbnails/11.jpg)
11
5. Select Server Database.
![Page 12: Safran Risk 7](https://reader030.fdocuments.net/reader030/viewer/2022012710/61aa5db6c71a847f1101bbbf/html5/thumbnails/12.jpg)
12
6. Accept the license agreement and click Next
![Page 13: Safran Risk 7](https://reader030.fdocuments.net/reader030/viewer/2022012710/61aa5db6c71a847f1101bbbf/html5/thumbnails/13.jpg)
13
MSI Installation If you want to deploy Safran Risk with an msi package, you need to browse to
“C:\Users\YOURACCOUNT\AppData\Local\Downloaded Installations”
In one of the folders with a cryptic numeric name, and todays date, you will find Safran Risk.msi file.
Copy and paste this file to a location for further packaging.
7. Choose where to install Safran Risk, default is
C:\Program Files (x86)\Safran Software Solutions\Safran Risk\
Click Next.
![Page 14: Safran Risk 7](https://reader030.fdocuments.net/reader030/viewer/2022012710/61aa5db6c71a847f1101bbbf/html5/thumbnails/14.jpg)
14
8. Setup the connection to the database server, using the appropriate login details for the database
you are going to use and click Next (Note: This must either be an existing empty database, or an
existing Safran Project database of a compatible version)
9. Click Install or follow instructions.
![Page 15: Safran Risk 7](https://reader030.fdocuments.net/reader030/viewer/2022012710/61aa5db6c71a847f1101bbbf/html5/thumbnails/15.jpg)
15
10. Safran Risk installs.
11. When complete, click Finish
![Page 16: Safran Risk 7](https://reader030.fdocuments.net/reader030/viewer/2022012710/61aa5db6c71a847f1101bbbf/html5/thumbnails/16.jpg)
16
How to add and activate a license
In order to run Safran Risk you need to have a license. When starting Safran Risk for the first time you
get prompted if you want to add a serial number or if you want to run it as an evaluation. If you choose
to evaluate Safran Risk you are allowed to do so for 30 days. (The evaluation version is a full version)
After the evaluation period ends you need to activate the product with a serial number if you want to
continue using it.
Add a serial number to activate Safran Risk
1. Start Safran Risk
2. Choose “I have a serial number and want to activate Safran Risk” and click Continue.
3. Enter Serial number, name, email address and click Continue
![Page 17: Safran Risk 7](https://reader030.fdocuments.net/reader030/viewer/2022012710/61aa5db6c71a847f1101bbbf/html5/thumbnails/17.jpg)
17
4. Click Continue to start activating Safran Risk
![Page 18: Safran Risk 7](https://reader030.fdocuments.net/reader030/viewer/2022012710/61aa5db6c71a847f1101bbbf/html5/thumbnails/18.jpg)
18
5. Safran Risk is activating
6. Activation Completed click Continue
![Page 19: Safran Risk 7](https://reader030.fdocuments.net/reader030/viewer/2022012710/61aa5db6c71a847f1101bbbf/html5/thumbnails/19.jpg)
19
7. Safran Risk starts for the first time
![Page 20: Safran Risk 7](https://reader030.fdocuments.net/reader030/viewer/2022012710/61aa5db6c71a847f1101bbbf/html5/thumbnails/20.jpg)
20
Important Information for users with an expired trial license
If you have previously installed and activated Safran Risk using a trial license, and this trial license has
now expired, you should follow these instructions to re-activate Safran Risk.
The first time you run Safran Risk after installing or upgrading to the V7.2 release users with an expired
license will be taken to the screen below (Figure 1).
PLEASE LEAVE THE BOX ABOVE ‘APPLY KEY’ EMPTY AND DO NOT CLICK ‘APPLY KEY’, INSTEAD SIMPLY
CLICK ON THE ‘ACTIVATE AGAIN’ BUTTON HIGHLIGHTED IN THE SCREENSHOT.
Figure 1
Clicking ‘Activate again’ will take you to the main Safran Risk activation screen (Figure 2) where you can
enter the Serial Number you have been provided with along with the additional user information.
![Page 21: Safran Risk 7](https://reader030.fdocuments.net/reader030/viewer/2022012710/61aa5db6c71a847f1101bbbf/html5/thumbnails/21.jpg)
21
Once this information has been entered ‘Continue’ will be enabled, clicking on this will take you through
to completing the activation process.
Figure 2
![Page 22: Safran Risk 7](https://reader030.fdocuments.net/reader030/viewer/2022012710/61aa5db6c71a847f1101bbbf/html5/thumbnails/22.jpg)
22
Licensing Networked edition
After Safran Risk is installed you will find a “SR7.lic” file in “%appdata%\Safran\Lic\Risk” folder.
For licensing to work for all users on the network, you need to move the SR7.lic file to a network share
where all users of Safran Risk have access to it. Users will need “write” permission to the SR7.lic file.
In addition, every Safran Risk client will need to have the path to the location of SR7.lic in the registry.
(See Registry Settings for example.)
The license file is activated by the first user. This way all the users use the same activated license file
eliminating the need for multiple activations.
Let’s say a company has purchased 10 licenses of Safran Risk. The correct way of setting up such an
environment is as follows:
Copy the license file (SR7.lic) to a file share where all Safran users have R/W access
Distribute (install) the software to the clients
Configure the registry for all the users (see “Registry Settings”)
Run software to activate License on file server
![Page 23: Safran Risk 7](https://reader030.fdocuments.net/reader030/viewer/2022012710/61aa5db6c71a847f1101bbbf/html5/thumbnails/23.jpg)
23
Activating the license
The License requires one activation. After the initial activation, each user will automatically register in
the license file ticking of licenses as they register.
Registry Settings
We highly recommend that you use the UNC path when setting the License path. We have used
\\10.10.2.1 as an example below, you need to adjust that according to your systems. The path must be
the same for all users.
32 bit
[HKEY_LOCAL_MACHINE\SOFTWARE \Safran Software Solutions\Safran Risk]
"License"="\\10.10.2.1\Safran\Risk\SR7.lic"
64 bit
[HKEY_LOCAL_MACHINE\SOFTWARE \Wow6432Node\Safran Software Solutions\Safran Risk]
"License"="\\10.10.2.1\Safran\Risk\SR7.lic"
Grace period “Roaming”
If for any reason a user loses the connection to the license file, the software will continue working for 30
days counting from the last successful connection to the license file. After this period the user needs to
reconnect to the original license file to continue using the software.
This is maintained by the license file “RiskLocal7.lic” located in “%appdata%\Safran\Lic\Risk” folder.
Users must have read/write access to this file.
![Page 24: Safran Risk 7](https://reader030.fdocuments.net/reader030/viewer/2022012710/61aa5db6c71a847f1101bbbf/html5/thumbnails/24.jpg)
24
Contact Safran Software Solutions AS. Submit a request online: https://support.safran.com/
When entering our support site the first time you should choose Sign In. When on the Sign In page
choose New to Safran Support. You will then become a registered Safran Support user with a username
and password for future Sign In’s to the site.
Email address: [email protected]
Telephone: +47 40 00 47 07