Safety Induction Training

You are about to undergo

Safety Induction Training

Please enjoy your seat and pay

attention carefully

Potential Hazards at WorkplaceHazard is anything that can

cause harm

Potential Hazards at Workplacea. Fall from

height,

deephole

trap into deep hole

Potential Hazards at Workplacea. Fall from

height, trap into deep

hole, fall into

sea

Potential Hazards at Workplaceb.

Cut, stabbe

d,and lacerated by sharp

objects/tools

Potential Hazards at Workplacec.

Fire,

electric shock and explosion

Potential Hazards at Workplaced. Falling

object, crushed by heavy

object,

Potential Hazards at Workplaced. Falling

object, crushed by heavy

object, entangled by rotating machines/parts, hit by moving vehicles

Potential Hazards at Workplacee. Exposure of harsh weather as storm,

heavy rain, sun heatRain

Guys, its rain now. Stop the activity and go

shelteringOh.. Its so hot today.. I need more drink water,

otherwise I will get dehydration

Potential Hazards at Workplacef. Bitten by noxious animals or insects as

snake, scorpion, and bee/wasp

My tail and tweezers, they are

so noxious ..

My bite is even more noxious then yours…

Be careful of my stings too …

Potential Hazards at Workplaceg. Exposure to noise, radiation, and

poisonous materials

Drt!!! Drt!!! Drt!!! Drt!!! drt!!!!

Exposure to excessive noise for

long period may lead to injury of hearing system

Controlling HazardsHazards are controllable

Controlling Hazardsa. Engineering control Installation of proper scaffolding (proper flat-form,

handrails, ladder, bracing, jack-plate, etc.)

Controlling Hazardsa. Engineering control Use of safe ladder. Never use defect ladder or drum

while working

Controlling Hazardsa. Engineering control Furthermore, when personnel must use long I ladder

make sure there is another person to hold the ladder or make sure the ladder secured to fix structure

Assign one person to hold the ladder

Secure to fix structure

Controlling Hazardsa. Engineering control Cover of hole/opening. Every hole/opening with

hazard of people fall into it must be covered properly.

I must cover this hole / opening

properly, otherwise people will fall into

it

Controlling Hazardsa. Engineering control Installation of safety barrier means to isolate the

hazard and to keep people away from the hazard.

Hey, you have to stay

outside the barrier

Ups.. Sorry

Controlling Hazardsb. Arrangement of Equipments and

Materials on the Safe Place and Safe Manner

Example: Acetylene tanks must be place on upright position and be secured to fix structure as rack.


Materials on the Safe Place and Safe Manner Example: Bend all protruding nails on waste of woods to prevent foot punctured by nails.

For our own safety, we must bend all

this protruding nails

Ouch… I forgot to bend that nail. Now, my foot punctured

by nail

Are you OK? Let me help you


Materials on the Safe Place and Safe Manner Materials laid down in unsafe place may endanger employees in the vicinity


Materials on the Safe Place and Safe Manner Live cable must be with proper insulation, proper connection, grounding, and to be arrange in such way to avoid trailing cable. When necessary, post warning signs in the vicinity.


Materials on the Safe Place and Safe Manner Flammable materials must be stored in separate room that free from spark of fire or excessive heat and with sufficient ventilation. Storage must be posted with warning sign “flammable materials”, prohibition sign “no smoking”, and Material Safety Data Sheet (MSDS).


Materials on the Safe Place and Safe Manner Harmful substances to be stored in separate room with restricted access and completed with warning sign and MSDS

Only competent and authorized person may deal with harmful substances.

Controlling Hazardsc. Provision of safety signs in the

strategic area of the Workplace Prohibition sign: white background, circular red border with

diagonal cross bar, black symbol.

No Smoking

Prohibition sign means that particular action is prohibited in the area.


strategic area of the Workplace Warning sign: triangle shape, yellow background, black

border, and black symbol. Warning sign means to warn attendance about potential

hazard that may happen in the vicinity


strategic area of the Workplace Mandatory sign: round shape, blue background, and white

symbol Mandatory sign means that action must be done as mandated by the sign.

Controlling Hazardsd. Use of proper Personal Protective

Equipment (PPE). Safety Helmet, means to protect head from impact caused

by falling object, moving object, and etc.

Safety helmet must be worn properly at all time while personnel present on the premises

Helmet is very

Important


Equipment (PPE). Safety Shoes is steel toe shoes means to protect feet from

falling object, sharp object, impact, insect, chemical, and etc.

Safety shoes must be properly worn at all time while on the premises.

Safety Shoes


Equipment (PPE). Safety belt / body harness is a mean of falling protection. In

case personnel fall from height, safety belt / body harness will catch the person. Personnel working at a place 2 meters high or more and with hazard of falling person, must use safety belt / body harness.

2m

Safety belt / body harness


Equipment (PPE). Another example of safe use of safety belt / body harness.

Anchor safety belt to fix structure, do not anchor it to unfix structure.

Correct Method Incorrect Method


Equipment (PPE). Working at height without safety belt / body harness is very

dangerous.

>2m

Unsafe action(no safety belt)


Equipment (PPE). Use of face shield for cutting and grinding work. Face shield

means to protect face from spark of fire or flying-broken cutting / grinding disk.

So, remember to use face shieldwhile grinding or cutting

I didn’t wear face shield while grinding. Suddenly the disk broken and hit my face. Look at my face, it

so badly injured.


Equipment (PPE). Welding work requires welder to use welding mask, welding

gloves, welding apron, and smoke mask (if necessary).Welding mask

Apron

Welding clothes

Welding gloves

No apron

No welding mask

No welding gloves


Equipment (PPE). When exposed to excessive noise, personnel must use ear

plug / ear muff to reduce the noise to acceptable level.

Ear plug


Equipment (PPE). When exposed to excessive noise, personnel must use ear

plug / ear muff to reduce the noise to acceptable level.

Ear muff


Equipment (PPE).Use of proper hand gloves to protect hands

from injury. When hand gloves

get defected, change it with the

new one

OK Sir


Equipment (PPE).When working on or over water, wear life

jacket

Life jacket will keep you floating when you fall in to water

Its easier for your buddy to help you if you use life jacket


Equipment (PPE). When driving, fasten your seat belt. To see why seat

belt is important to you, take a look at this….

So.. Remember to use seat belt while driving!!!

Controlling Hazardse. Periodic Safety Training and Safety

CampaignSafety induction

is held for new personnel prior to work on site. Personnel undergone induction to be informed about hazards on site, hazards control, site safety regulation, emergency response, and etc.

Indoor Safety Induction Outdoor Safety Induction


CampaignToolbox meeting is held daily to maintained awareness of personnel, conducted by supervisor or safety officer attended by a group of workers.


CampaignSafety Mass Meeting is a monthly meeting conducted by MES and attended by all subcontractors personnel. Management shall give general safety talk on the meeting.

Remember to work safely at

all time

Our objective is zero accident


CampaignFire Fighting Training


CampaignFirst Aid Training


CampaignThe Best Safety Performance - Subcontractor is subcontractor that performed the best safety implementation on site. Reward given to the subcontractor by Safety Committee

The Best Safety Performance – Subcontractor(Period of January 2009) The Best Safety Performance – Subcontractor

(Period of February 2009)

Congratulation!Pak Sujadi

Thank you Pak Patrick

Site Safety RegulationRegulation for better

performance

Site Safety Regulationa. Every personnel must commence

work in safe manner, never try to work in unsafe manner that may endanger him self, other people, equipments and materials. My friend, don’t

ascend the ladder with one hand!!.

U should not bring any

material while ascending

Oh…help!! I am

falling !!

Site Safety Regulationb. Every personnel must obey Health and

Safety Regulation at Workplace and make sure to pay attention to safety signs in the area before commencing task.

Guys, remember to follow work method and site safety

regulation. We have to remind each other to work safely. I don’t want anyone of us get

accident. We come here safe, we go home safe.

Site Safety Regulationc. Every personnel is prohibited to fight,

gamble, steal, consume liquor and illegal drug.

Breaching this regulation shall impact to immediate dismissal from site project.

Site Safety Regulationd. Every personnel is prohibited to carry

any gun or weapon to work place.

And also not allowed to bring any

such weapon like this

We, workers, are not

allowed to carry gun to work area

Site Safety Regulatione. It is prohibited to any body to operate

any equipments / heavy equipments without authorization from his employer. Only competent person will be authorized to operate equipments / heavy equipments.

Sorry Sir, you are not allowed to operate the

heavy equipment

Hmm.. I want to operate

this heavy equipment but I don’t have any

license

Site Safety Regulationf. Every personnel is obligated to report

unsafe condition, near-miss, and incident/accident to supervisor or safety officer. Investigation will be carried out based on your report to take necessary prevention of the same occurrence in the future.

Sir, this sling is defect,

really unsafe

OK lets change it with the

good one

Site Safety Regulationg. Every personnel is obligated to keep

work area clean and tidy. Wasting garbage elsewhere is prohibited.

I will make this area clean at all time. Garbage brings

hazards to our health.

Site Safety Regulationh. Every personnel is prohibited to

smoking in workplace. Smoking is only allowed in designated smoking area.

Site Safety Regulation When you need to go smoking, please

go to designated smoking area

Site Safety Regulation

i. Every personnel should drive or ride any vehicle in project area with maximum speed 25 km/h.

Violation and Disciplinary ActionViolation is indicator of lack awareness

Violation and Disciplinary action

MES Management committed to encourage all personnel on the premises to comply with site safety violation. Necessary efforts such safety trainings, safety campaigns, safety awards, and safety inspections have been taken and will be kept continue.

Next necessary step to be taken by MES Management is to take disciplinary action against those who violate site safety regulation.

Every body from top management to the workers should take it seriously. Safety is every body responsibility.

Violation and Disciplinary action

First Violation Disciplinary Action

Second Violation Disciplinary Action

Third Violation Disciplinary Action

Reprimand

1st Warning Letter and 2 days suspension

2nd Warning Letter and 5 days suspension

Fourth Violation Disciplinary Action

Dismissal form project

End of Induction Training Should you need more information,

please contact safety team. We will be please to assist you.

Safety Contact

I Gede Sumantra, MES, (081379454399) R Bagus Teguh KW, MES, (0813

90565309) Dodi Achmad, SSP, (0812 20707786) Dodi Fahrodi, SSP, (0812 25592702) Lukman, SSP (0815 73565567) Ali Efendi, SWI, (0813 25373846) Muklish, SWI, (0852 31149115) Siswoyo, GEOTEC, (0815 53103042) Hendra Permana, CEM, (0856

93610638) Sony Setiawan, ACSET, (0813

90758455) Krismantomo, INDOMIX, (0813

90484651) Gilang Grishnanda, SKS, (0856

1948468) Adi Wijaya, KYUEI, (0813 57952420)

Emergency Contact

Hospital Bangsri (0291 771097) Hospital Kartini (0291 591175) Police Station Bangsri (0291771110) Police Station Jepara (0291 591110) Military Quarters Bangsri (0291 771003)

Safety Induction Training

Documents

Transcript of Safety Induction Training