Sadev Safco Gb

8/12/2019 Sadev Safco Gb

1/16

T E C H N I C A L C A T A L O G U E

THE SAFCOSYSTEM


2/16Tel: + 33 (0)4 50 08 39 00 - Fa x: + 33 (0)4 50 08 39 49 www.sadev.com - [email protected]

SADEV is the international expert in point fixed glass (dril-led). The company offers a wide range of fittings systemsfor the building envelope (Classic range) as well as for

interior finishing (Decor range).With more than 70 years o f experience as one of our asse ts, the compa nyputs its knowledg e of the market a nd its know-how a t your service .

Thanks to a highly competent technica l tea m, it is a lso possible to exe-cute customized components that perfectly meet the constraints of yourproject. Our personnel are attentive to your needs and will advise you inthe best choice of products for your realizations. Given that the majorityof our components are available in stock, we ensure great reactivity andspeedy deliveries.

SADEV components combine design, technical prowess and perfor-mance. Designed by an Italian designer, SADEV fittings display modern,so ft and s culpted forms that meet the dema nds of modern-da y a rchitec-ture. The ma in ma teria l used is s ta inless steel offering our acc essoriesoptimal resistance to corrosion.The ma jority of our fittings , swivels and b rackets bea r a technica l opiniondelivered by the CSTB*, which represents a genuine guarantee of reliabi-lity for each product sold.

Whether it is for the rea liza tion o f faca des, skylights, guard ra ilings or evenwindowless construction, there is always a SADEV component adapted

to your needs.

This edition of the Classic ca ta log ue is a first step b efore the distributionof documentation bringing together all of the range made for the buildingenvelope.

*French tes ting la bo ratory

E

DITO


3/16

.

.. www.sadev.com

Tel.: + 33 (0)4 50 08 39 00 - info@sa dev.c om - Fax: + 33 (0)4 50 08 39 49

HES

FC

S

S

E

THE S AFC OS YS TEM ::


4/16

THE S AFCO S YSTEM ::

01Tel.: + 33 (0)4 50 08 39 00 - Fa x: + 33 (0)4 50 08 39 49 www.sadev.com - [email protected]

THESAFCO

SYSTEM

The advantages of this system:: : Turnkey installation of a glass facade as

a 1st or 2nd building envelop.

: : Pre-engineered point supported glass faade.: : The installation of a SAFCO facade as a double skin offers

high-performance thermal and acoustical insulation.

: : Increases the energy performance.: : Sunshades integration limits solar radiation and raiseof the temperature in the building.

: : Safe and efficient System (french technical evaluation document): : A modern, transparent faade system, that is equally suitable

as a primary envelope for new or existing construction.

: : Thanks to the standardization of the different elements thatcompose the SAFCO facade, SADEV is capable of offeringyou very competitive prices.

: : Built in adjustments and installer friendly.

This turnkey point supported glas s fa ca de sys tem ca n be

used either as the first envelop of the building or as a secon-

da ry skin in the ca se of new cons truction or renova tions . The

latter case contributes to sustainable development since

significant energy savings can be made through a decrease

in heat los s a nd utiliza tion of the greenhous e effect. In ad di-

tion to energy savings, the SAFCO system provides a

smooth exterior glass rain screen to protect the primary

structure in areas with heavy annual precipitation. A final

added benefit is the creation of an additional acoustical bar-

rier s ignificantly low ering exterior noise pollution.

SAFCOSADEV point

supportedglass facade

concept


5/16



HES

FC

S

S

E

Characteristics:: : Standard height = 6.5m or 21.3 feet(please enquire for taller structures).

: : SAFCO can incorporate door openings; the systemis also suitable for building angles.

: : The standard components of this system are undertechnical approval delivered by the CSTB*.

: : The dimensioning of the glass panels are calculated by SADEVin compliance with the criteria of CSTB* specifications n 3574.

: : In addition, the structure and engineering of the SAFCO systemglass panels have been the subject of calculations validated bythe SOCOTEC inspection bureau (France). For the US, SADEV

will design the glass in accordance to local building codesand performance design criteria.

: : Tested for guard railing applications.: : The SAFCO components (posts and brackets) are available in stock

in raw aluminum. Clear Anodize, RAL powder coat and painted finishesare available on request.

Note: if your choice is made using S3007 spiders, it is possible to havethem painted the same color as the posts.

*French testing laboratory

What is it all about exactly?It is a simple turnkey solution for the constructionof your glass facade.

The system includes aluminum posts as well asthe lower and upper brackets to anchor the poststo the building main structure.

Depending on your aesthetic and technical crite-

ria, we select the models of hardware, bolts, andspiders that suit your project best.

SADEV will then provide the drawings for thefacade, material take off, and deliver the entirepackage ready to install.


6/16

Presentation of the facade components supplied by SADEV:

Articulated bolts:All these parts have been subjected to a technical evaluation document (availableon request). Technical information for each product is available in the articulatedbolts chapter of the SADEV Classic technical catalog.

S 3000 S 3001 S 3007 S 3003 S 3006

The spiders:All these parts have been subjected to a technical evaluation document (availableon request). Technical information for each product is available in the spiders chapterof the SADEV Classic technical catalog.

The gaskets:To be placedbetween the glasspanels or betweenthe wall and theglass, they ensurewaterproofing,thermal and acousticinsulation.

Glass panel:Designed for single or insulated glass panels (DGU).

MONOLITHIC ORLAMINATED GLASS

INSULATEDGLASS

INSULATEDGLASS



THESAFCO

SYSTEM

A

SSESME

NT

TECHNICAL

A

SSESME

NT

TECHNICAL

R 1001 R 1003 R 1006 R 1001A R 1039


7/16



HES

FC

S

S

E

The integrationof sunshades:Sunshades enable the pene-tration of indirect light intoyour building to reduce glareand modulate heat gain.

The sunshades can be offe-

red as part of a completeSAFCO facade or as a stan-dalone system without glasson existing structures.

The system is highly engineered and incorporates built in vertical andhorizontal adjustments. The blades angels can be easily set to adesired position during the assembly process.

The entire system is assembled on the back of the SAFCO posts.The components that form the sunshade system are made of alumi-num and are offered in the same color op tions as the SAFCO struc-ture.


8/16



Configuration:

THESAFCO

SYSTEM

SADEV provides a pre-engineered turnkey faade solution,ready to install. Calculations valid within the following criteria:- Maximal wind load = 1000 Pascals- Maximum glass height = 1.6 m- Maximum glass width = 2 m- Maximum faade height = 6.5 m

In case these conditions would not be fulfilled, a design calculation should be carried out.Consult us.

Different configurations are available accordingto the faade height:

2 glasseshigh

3 glasseshigh

4 glasseshigh

5 glasseshigh


9/16



Components of the SAFCO system:

Dimensions:

HES

FC

S

S

E

Reference: X

S3000 115 mm

S3001 80 mm

S3003 92 mm

S3006 105 mm

S3007 105 mm

Details:

Connecting brackets

Bolts

Spiders

Covers

Posts

Adjustments:

1 - Unlimited vertical adjustment

2 - Horizontal adjustments +/- 3 mm

3 - Horizontal adjustments on theconnecting brackets +/- 7 mm

4 - Depth adjustment +/- 10 mmwith a standard bolts


10/16



THESAFCO

SYSTEM

Sunshades on a SAFCO facade:

Details:

Sunshades

Sunshade support structure

Toothed brackets for orientation

Runners

Posts

Adjustments:1 - Unlimited vertical adjustment

2 -Angle adjustments every 15

3 - Free horizontal adjustment

Dimensions:

SAFCO sunshades are mounted directly on the posts (225mm) of the SAFCO facade. The adjustment of the angle of theblades is done during assembly and cannot be modified without dismounting the blades. This model cannot be motorized.


11/16



HES

FC

S

S

E

Sunshades on posts (existing facade):

Details:

Sunshades

Sunshade support structure

Toothed brackets for orientation

Runners

Posts

Adjustments:1 - Unlimited vertical adjustment

2 -Angle adjustments every 15

3 - Free horizontal adjustment

Dimensions:

The SAFCO sunshade is a set of posts (145 mm) and sunshade blades that are mounted on an existing facade.The angle adjustment of the blades is made during assembly and cannot be adjusted without dismounting the blades.This model cannot be motorized.This model cannot be equipped with a SAFCO facade; the posts are not resistant enough.


12/16



THESAFCO

SYSTEM

The SAFCO SystemProject name: Your phone number: DISCOUNT Your fax:

Customer name: Interlocutor : Date :

Request for an estimate:

Price request

Order

Dimensional information:(space between wall and panels):.....................

Aesthetic information:

Colors: Unfinished natural aluminum (choice of finishing) RAL paint N...Anodization

Dimensioning of the glass panels: Unimportant (best price relation per m)

Horizontal layout. Vertical layout. Squared layout

Sunshade options: Yes No

Choice of fittings: Choice of spiders(the S3007 can be paintedin the same RAL asthe structure):

Sites exposed to corrosion (seaside, etc..)requiring special surface treatment of components.

Choice of fittings:

Geo localization information:

Characteristics and parameters of your project:

S 3000 S 3001

S 3007 S 3003 S 3006

H

HH

Please fill in the indispensable information here below, without whichwe cannot calculate your facade:Country: City:

Normal pressure (ELS): Pa or PSF (US) Ultimate pressure (ELU): Pa or PSF (US) Normal site Exposed site (seaside, etc..)

Case n1 Case n2 Case n3 Case n4

R 1001 R 1003 R 1006

R 1001A R 1039


13/16



HES

FC

S

S

E

Custom-built configuration1 & 2 - Corner post

3 - Strut

4 - External gangway

5 - Safety rail (tension rods)

2 3

4

5

1


14/16



THESAFCO

SYSTEM

ARCHITECTURAL GLASS SYSTEMS


15/16Pa ge 1

Terms of salesARTICLE 1: ACCEPTANCE OF ORDERS

We are not bound by offers, commitments made by our

employees or verbal or written orders except in the

case of a written confirmation, or shipment of mer-

chandise on our part.

ARTICLE 2: TOLERANCE AFTER DELIVERY

Delivery of our supplies, products and merchandise is

always carried out according to the usual practises of

the profession, whether concerning quantities or the

quality and norms of the product.

ARCTICLE 3: DELIVERIES

3.1 Delivery is carried out by the transfer of merchan-

dise, either directly to the client, or via a consignor or a

carrier chosen by us with the lowest cost, with no res-

ponsibility on our part. In all cases, the merchandise is

transferred at the risk and peril of the client.

3.2 Insurance against breakage, theft or loss is provi-

ded only upon written request by the client who shall

pay us the necessary sum in advance for the payment

of resulting premiums, fees and duties.

3.3 We reserve the right to invoice the client a fixed

amount pertaining to the cost of transport for small

orders.

3.4 In the case of delay, damage or loss of all or some

of the transported merchandise and products, it is the

clients own responsibility to find solutions.

3.5 Claims made on the characteristics, quality, quan-

tity or weight of the delivered merchandise or a discre-

pancy with its dispatch note or delivery slip, shall be

put in writing before 15 days after the date of reception

of the merchandise without prejudice to the measures

that need to be taken with regard to the carrier- this 15

day deadline being sufficient time for the client to carry

out the necessary qualitative and quantitative controls

of the delivered merchandise.

3.6 All increase in charges, duties, taxes and stamp

duties calculated, based on the cost or volume of the

merchandise, occurring after contracting with the

client, is the responsibility of the purchaser, even if the

sale is considered to be duties paid

ARTICLE 4: DELIVERY DATE

The delivery dates mentioned in our documents are

only indicative values and only apply when all the

conditions of sale are agreed by both parties. Delivery

dates do not engage the responsibility of our company,

unless otherwise stipulated, in an agreement signed by

all parties.

ARTICLE 5: AFTER SALES RESPONSIBILIT IES

5.1 In the case of delivery of damaged goods, our res-

ponsibility is limited to the obligation of replacing the

merchandise or reimbursing the amount invoiced to the

client; at the exclusion of all forms of damages and

interests.

5.2 Any reimbursement of all defective merchandise

will be made by all means available to us: credit note,

cheque etc. It shall be subject to prior payment of all

outstanding invoices by the client and the said client

shall respect his prior contractual agreements, espe-

cially those resulting in the current general conditions

of sale.

5.3 The client requesting a replacement or a reimbur-

sement of an amount of damaged merchandise shall

make the said products or materials available for pos-

sible inspection and expert assessment. In the case of

negligence, our responsibility can not be brought into

question.

5.4 Sadev products need a followed up and regular

maintenance device (cleaning once a year). At this

occasion, a point shall be made on the aging of the

products and all suspicious signs shall be reported to

SADEV (abnormal oxidation, defective montage etc.).

ART ICL E 6: CAUSES OF MODIFICATIONS OF

AGREED CONDITIONS

6.1 In the case where one or more modifications of theclients situation would unfavourably influence the client

credit that we have accorded to him, we reserve the

right to unilaterally cancel the current contract and /or

demand new guarantees.

6.2 For all contracts made with the client, the client

credit which we consented to provide shall be limitedto the initial agreed contract. In consequence, if the

client makes additional orders while the initial contract

is not fully paid, in such a way that this new situation

unfavourably modifies client credit that we consented

to provide, we reserve the right to demand new gua-

rantees from the client or to demand anticipated pay-

ment of his obligations in order to recreate a favourable

client credit with our company.

6.3 If the agreed deal involves more than one delivery

and if the client refuses an expected delivery or he

does not pay the totality of the contractual payment

obligations as contained in the invoice that we have

sent him, the whole deal is CANCELLED. In conse-

quence, the client cannot refuse any demand for com-

pensation with regard to our delivery required, which

then becomes null and void. Furthermore, the vendor

may, according to a common agreement between the

parties, exercise the option of requesting payment of allsums due by referring to the initial order and the

contract agreed to by all parties. Therefore, all sums

due concerning the order in question and all other

nature of sums due to us by the said client become

immediately payable, irrespective of the previously

agreed contractual conditions; without any formal

notice on our part, or further discussion.

6.4 In the case of late payment or partial payment of

instalments, except in the case of prior written agree-

ment from us, deliveries are suspended until entire pay-

ment of the total sum due is made; including the capi-

tal and interest; and the agreement made between the

parties is cancelled.

6.5 In the case of non respect of any of the obligations

from the agreement or the present general conditions

of sale, we reserve the right to cancel the intervening

sale(s) which shall come into effect ten days after

reception of a registered letter, if no action is takenbeforehand.

ARTICLE 7: PAYMENTS

7.1 Payments are made out to us, and sent to our bil-

ling address.

7.2 Respect of the contractual payment terms is impe-

rative. Unless otherwise stipulated, our invoices shall

be paid 30 calendar days from the date of dispatch of

the merchandise. In the case of payment by bill of

exchange, the purchaser is obliged to return the effects

sent to him within 7 days.

7.3 According to the law No 92.1442 concerning late

payment in the case where the sums due have not

been paid at the agreed date, penalties for late pay-

ment of an amount equal to one and a half times the

legal rate of interest- shall be applied to said sums due,

and shall be calculated until full and complete pay-

ment.7.4 In the case of late payment or partial payment of

the fixed amount due, we reserve the right to suspend

deliveries until payment of the sums due, including the

capital and interest.

7.5 According to a common agreement between par-

ties, a surcharge of EUR 150 will be applied for each

unpaid account receivable.

7.6 If the financial situation of our client is not satisfac-

tory, we reserve the right to demand new guarantees

and cancel the contract.

7.7 The agreed prices take into account monetary and

economic conditions, and the price of raw materials at

the time. We reserve the right to bill all or part of the

transaction at different prices, according to the varia-

tions these conditions may undergo, whether it be

before the order is made or during the execution of the

transaction. Our prices are always based on the valid

market price at the moment of the presentation of theoffer or registration of the order; and can be reapprai-

sed in the case of modifications of said price.

ARTICLE 8: QUALITY AND QUALITY CONTROL OF

DELIVERED PRODUCTS

8.1 Except in the case of a specific request made by theclient, being subject to a written agreement between

the parties, concerning the special quality of the pro-

ducts or certain defined controls of quality applied to

the products; the sold merchandise have a standard,

habitual, market quality.

8.2 All information concerning quality, the chemical

composition, the characteristics and physical properties

etc of the sold merchandise are simply informative and

do not, under any circumstances, imply any form of

guarantee by the vendor; unless stipulated otherwise.

ARTICLE 9: PURCHASING CONDITIONS OF THE

CLIENT

9.1 Making an order, or confirming an order implies full

acceptance of the present general conditions of sale

WITHOUT reserve by the client. Therefore the client

expresses that he is FULLY AWARE of the present

general conditions of sale.9.2 In consequence, the client or purchaser concerned

by the present conditions of sale RENOUNCES his own

conditions of sale; irrespective of the terms, and speci-

fically in the case where he has addressed us condi-

tions of sale or other documents containing similar pro-

visions which are contrary to our own conditions of sale,

unless the said provisions are part of a special written

agreement signed by the parties that allows the waiver

of these terms.

ARTICLE 10: RESERVATION OF TITLE

We sell under reservation of title-without exception- all

products, materials and merchandise that we commer-

cialize.

We maintain ownership of delivered merchandise, as a

guarantee on present and future accounts receivable

that we impose on our buyer until complete payment by

the latter of the sums due.Our right of ownership extends to new products from

the transformation of merchandise under reservation of

title. The buyer manufactures the new product for us (at

the exclusion of his own reservation of title). He cannot

therefore, make any claims against us.

If other suppliers, having themselves an extended reser-

vation of title, are implicated in the transformation of

merchandise, we become co-owners with them of the

final product at the exclusion of the purchaser, added

value included.

Our share of the ownership of the new goods shall cor-

respond to a percentage of the billing value of our mer-

chandise over the total billing value of other products,

under reservation of title in the transformation process.

The purchaser immedia tely assigns his accounts rece i-

vable as well as all related rights to us, as a guarantee

from the resale of the merchandise under reservation of

title; corresponding to our present and future deliveries,within the limits of our participation in the co-ownership.

As long as the purchaser respects the contractua l obl i-

gations, he has the right to resell the merchandise deli-

vered under reservation of title and he may himself pro-

ceed to the collection of assigned claims. In the case of

late payment or well-founded doubts regarding sol-

vency or financial credibility of the purchaser, we have

the right to recover the assigned claims ourselves and

take back the delivered merchandise under reservation

of title; while only a formal document will allow cancel-

lation of the contract.

ARTICLE 11: ATTRIBUTION OF JURISDICTION

Attribut ion of jurisdiction is made exclus ively to the tri-

bunals of ANNECY, even in the case of multiple defen-

dants; all of which is an essential condition in the frame-

work of our business activity. Acceptance of regulations

or payment outside ANNECY, does not lead to substi-tution, or derogation of this clause.


16/16

NRDC

AnnecyTGI41018728000020-Ndegestion96b812-APE285C

-SADEVe

stunemarquedposedeSBIngnierie.

05/2010.

Crditsphotos:SADEV/Marguerat/IDEA-CONCEPTION

:future-creation.com.

Documentnonco

ntractuel.

Tel.: +33 (0)4 50 08 39 00 Fax: +33 (0)4 50 08 39 49 E-mail: [email protected]

www.sadev.c om

SADEV Schweiz AGTel : +41 (0) 62 892 40 13Fax : +41 (0) 62 892 40 14

[email protected]

SADEV USA Inc.Tel: +1 319 524 5600Fax: +1 319 524 [email protected]

Sadev Safco Gb

Documents

Transcript of Sadev Safco Gb