The Ultimate Inserter System For Advancing Productivity Series
S-4000 axial inserter machine
-
Upload
jessica-xiong -
Category
Automotive
-
view
52 -
download
0
Transcript of S-4000 axial inserter machine
Through Hole Products
Axial/Sequencer S-4000
Expandable from 20 stations to 100 stations (10 Station Increments) Speeds up to 22,000/hour Low maintenance feeder technology Dual part detection – two parts in same chain slot. Insertion Directions: 0°,90°,180°,270° Jumper Wire Feeder Support
http://www.smthelp.com
• - 22,000 CPH – Spec Speed• 13,000 CPH – “Real” Throughput Speed
• - Expandable from 20 inputs up to 100 inputs•- Jumper Wire Feeder Support, insert JW directly directly without sequencer again to save 1/3 JW.•- Low maintenance dispenser heads
• - Insertion Directions: 0°,90°,180°,270°• - Components require: 52mm Taped axial leads; • - Component lead span: 5.0mm • - Components available: Capacitor, Transistor, Diode, Resistance, Fuse, Taped axial leads components•- Lowers Cost of Ownership• Low Energy costs.•- Easy to Use User Interface• Easy operation, use Excel program and USB input. • Off-line programming available
http://www.smthelp.com
Insertion Rate 24000 pcs/hrNon Performing Rate Less than 300PPMInsert Theta Parallel 0°,90°,180°, 270°Component Span Dual span 5.0mm-20mmPCB size Max: 450mm*450mm;
Min:50mm*50mm PCB thickness 0.79-2.36mmComponent types Axial tape packed material, such as
capacitor, transistor, diode, resistor, blown fuse.
Clinch length 1.2-2.2mm(adjustable)Clinch degree 0-35°(adjustable)Station quantity 60 stations(recommended),optional(10-
100 stations)Machine size (length×width×height)
Main unit 1700mm×1300mm×1600mm
Station size(length×width×height)
510mm×1000mm×1410mm(10 stations)
Main unit weight 1500KGAuxiliary unit weight 750KG(40 stations)Power supply 220V,AC(single phase), 50/60HZ, 2.0KVA;System protection Uninterruptible power supply (UPS)
configuration, run 15 minutes after power outage
Working power 1.6KW (Energy Saving)Air pressure 0.6–0.8MPAAir consumption 0.3m³/minute
S4000 Axial Auto Insertion Machine
Axial Inserter S-4000 SpecNeighbor components parallel distance E(pitch)=5.0mmTape width: 52mmMax Component Body Length:C=16mm , Resistor:1/8W-2WAxial Lead Component Kind:Diode、Resistor、Capacitor and so on.Max body diameter D=5.0mm
http://www.smthelp.com
Axial Inserter S-4000 Spec
Hole Span:5~20mmJW Span:5~30mm
Hole Diameter = Lead Diameter + 0.48mm ±0.08mm.(0.019") (0.003")
Clinch lead angle is adjustable in a range (0°- 45°). Clinch lead length is adjustable from 1.28mm (0.050") to 1.80mm (0.071") and is measured from the center of the insertion hole to the end of the lead.
http://www.smthelp.com
• Electrical industries appliances:Air conditioner, Television, Microwave, Electric cooker, Electric kettle, Induction cooker etc.
• Vehicle industries application: Vehicle power supply, Vehicle light, Car audio etc.
http://www.smthelp.com
• Power supply appliance: Vehicle power supply, Energy saving power supply, Ballast etc.
http://www.smthelp.com
Welcome inquiry
1,Please visit : www.smthelp.com
2, Find us more: https://www.facebook.com/autoinsertion
3, Know more our team: https://cn.linkedin.com/in/smtsupplier
4, Welcome to our factory in Shenzhen China
5, Google:Auto+Insertion
6, Looking forward to your email: [email protected]
http://www.smthelp.com
Contact :JessicaEmail:[email protected]:Jessica SMT SalesPhone:+86 17773027293Website: www.smthelp.comShenzhen Southern Machinery Sales and Service Co., Ltd