RWD AXLE BEARINGS u Chapter 7 u Page 164 l Classroom Manual u Page 300 l Lab Manual...

9
RWD AXLE BEARINGS Chapter 7 Page 164 Classroom Manual Page 300 Lab Manual C B C A U T O M O T I V E R K

Transcript of RWD AXLE BEARINGS u Chapter 7 u Page 164 l Classroom Manual u Page 300 l Lab Manual...

Page 1: RWD AXLE BEARINGS u Chapter 7 u Page 164 l Classroom Manual u Page 300 l Lab Manual CBCAUTOMOTIVERKCBCAUTOMOTIVERK.

RWD AXLE BEARINGS

Chapter 7 Page 164

Classroom Manual Page 300

Lab Manual

CBC AUTOMOTIVE RK

Page 2: RWD AXLE BEARINGS u Chapter 7 u Page 164 l Classroom Manual u Page 300 l Lab Manual CBCAUTOMOTIVERKCBCAUTOMOTIVERK.

FULL-FLOATING AXLE

Definition - axle bearing is on the outside of the axle housing.

No weight is on the axle shaft. Used on 3/4 ton and larger trucks,

and four wheel drive front axles. If axle breaks wheel will not come

off.

CBC AUTOMOTIVE RK Page 165 C

Page 3: RWD AXLE BEARINGS u Chapter 7 u Page 164 l Classroom Manual u Page 300 l Lab Manual CBCAUTOMOTIVERKCBCAUTOMOTIVERK.

SEMI-FLOATING AXLES

Definition - axle bearing is inside the axle housing.

Weight of vehicle is on the axle shaft.

If the axle breaks the wheel will come off.

CBC AUTOMOTIVE RK Page 165 C

Page 4: RWD AXLE BEARINGS u Chapter 7 u Page 164 l Classroom Manual u Page 300 l Lab Manual CBCAUTOMOTIVERKCBCAUTOMOTIVERK.

BEARING STYLES

Three styles of RWD solid axle bearings. Ball Axle Bearing Straight-Roller Axle Bearings Tapered-Roller Axle Bearings

Lubricated from differential or packed with wheel bearing grease at time of installation.

Page 166-167C

CBC

AUTOMOTIVE RK

Page 5: RWD AXLE BEARINGS u Chapter 7 u Page 164 l Classroom Manual u Page 300 l Lab Manual CBCAUTOMOTIVERKCBCAUTOMOTIVERK.

BALL AXLE BEARINGS

Held in place by metal retainer bolted to the end of the axle housing.

Seal is inside of the axle bearing.

CBC

AUTOMOTIVE RK

Page 166 Figure 7-46

Page 6: RWD AXLE BEARINGS u Chapter 7 u Page 164 l Classroom Manual u Page 300 l Lab Manual CBCAUTOMOTIVERKCBCAUTOMOTIVERK.

STRAIGHT-ROLLER

CBC

AUTOMOTIVE RK

Held in place by a C-Clip in the differential case.

Seal is on the outside of the bearing.

Bearing is lubed from differential.

Page 7: RWD AXLE BEARINGS u Chapter 7 u Page 164 l Classroom Manual u Page 300 l Lab Manual CBCAUTOMOTIVERKCBCAUTOMOTIVERK.

TAPERED-ROLLER Held in place by metal retainer

bolted to the end of the axle housing.

CBC

AUTOMOTIVE RK

Two seals one inside of bearing, one outside.

Page 8: RWD AXLE BEARINGS u Chapter 7 u Page 164 l Classroom Manual u Page 300 l Lab Manual CBCAUTOMOTIVERKCBCAUTOMOTIVERK.

IRS AXLE SHAFTS

Two types of independent suspension: Swing Axle

Single Joint Camber changes with suspension travel.

Independent Rear Suspension Camber does not change with suspension

travel. Two Joints

Axle bearings are similar to FWD.

CBC

AUTOMOTIVE RK

Page 168-169C

Page 9: RWD AXLE BEARINGS u Chapter 7 u Page 164 l Classroom Manual u Page 300 l Lab Manual CBCAUTOMOTIVERKCBCAUTOMOTIVERK.

MAINTENANCE

Use correct lube type: GL-1, GL-2, GL-3, GL-4, GL-5.

Posi-traction differentials require a Limited-slip additive.

Transaxles may require: Gear oil Motor oil ATF

CBC

AUTOMOTIVE RK

Page 169C