RUTGERS INTELLIGENT TRANSPORTATION SYSTEMS INSPECTION AND MAINTENANCE SOFTWARE (RITSIMS)...
-
Upload
edmund-stephens -
Category
Documents
-
view
213 -
download
0
Transcript of RUTGERS INTELLIGENT TRANSPORTATION SYSTEMS INSPECTION AND MAINTENANCE SOFTWARE (RITSIMS)...
RUTGERS INTELLIGENT TRANSPORTATION
SYSTEMS INSPECTION AND MAINTENANCE
SOFTWARE(RITSIMS)
03.12-13.200803.12-13.2008
NJDOT TRAINING CASE STUDY
Inspection for a CCTV:
1. Pre-Construction Electric Service
2. Service Poles and Electrical Feed
Inspection
• A new CCTV equipment is to be installed at I-287 Intersection on Route 1.
•It should be checked if it satisfies the inspection criteria.
Inspection
• The trainer checks the location and details of the camera at the office and consults his supervisor.
• With his laptop or tablet PC, and/or printed documents, he is ready to for the site inspection.
User Manual (How to Open RITSIMS?)
• Find the RITSIMS.exe on your desktop and just click on the application.
User Manual (How to Open RITSIMS?)
• As an alternative, locate the RITSIMS software folder.
• Find the MTSOFT.exe and just click on the application.
User Interface
User Manual (User Name and Password)
Select user1 as Username
Write 1234 for Password
User Manual (Starting the Applications)
Select “Start Inspection or Maintenance Applications”
User Manual (Equipment Selection)
Select “Closed Circuit
Television Systems”
User Manual (Option Selection)
Select “Inspection”
Option
User Manual (Location Selection)
Select EquipmentLocation
User Manual (Previous History Check)
As this is the first time
inspection, observe that there is no previous history.Click on “NEXT”
User Manual (Equipments)
Select “Preconstructi
on Electric Service”.Click on “START
APPLICATION”
User Manual (Questions)
Answer the eight
questions as instructed in
your handout
User Manual (Questions)
Then, click on “Next Component”
User Manual (Equipments)
Select “Service Poles and Electrical
Feed”.Click on “START
APPLICATION”
User Manual (Questions)
Answer the five
questions as instructed in
your handout
User Manual (Questions)
Click on “Exit” to see
the Final Report
User Manual (Inspection Report)
See the inspection report and
write comments if
needed!
User Manual (Inspection Report)
Change the “FAIL” answers
to “PASS”! When finished, click on “END”.
User Manual (Inspection Report)
Click on “SAVE AND CLOSE”!
Maintenance for the same CCTV:
Conduit and Cables
Maintenance • It has been a month since the installation and acceptance of the new CCTV equipment.
•It now should be checked if it works properly through the preventive maintenance checklists.
Maintenance• The trainer is getting ready for the preventive maintenance checks for the CCTV equipment.
• With his laptop or tablet PC, and/or printed documents, he is ready to for the site maintenance checks.
User Manual (How to Open RITSIMS?)
• Find the RITSIMS.exe on your desktop and just click on the application.
User Manual (How to Open RITSIMS?)
• As an alternative, locate the RITSIMS software folder.
• Find the MTSOFT.exe and just click on the application.
User Manual (User Name and Password)
Select user1 as Username
Write 1234 for Password
User Manual (Starting the Applications)
Select “Start Inspection or Maintenance Applications”
User Manual (Equipment Selection)
Select “Closed Circuit
Television Systems”
User Manual (Option Selection)
Select “Maintenanc
e”Option
User Manual (Previous History Check)
Observe the previous
inspection performed.
Click on “NEXT”
User Manual (Options/Components)
Select “Preventive/Routine”Maintenance
Option.Select “CCTV Conduit and
Cables”Click on “START APPLICATION”
User Manual (Questions)
Answer the eight
questions as instructed in
your handout
User Manual (Questions)
Then, click on “Exit” to See the
Final Report
User Manual (Maintenance Report)
See the maintenance
report and write
comments if needed!
User Manual (Maintenance Report)
Change the “Not
Completed” Answers to
“Completed”! When finished, click on “END”.
User Manual (Maintenance Report)
Click on “SAVE AND CLOSE”!
Database Synchronization – Updating Master
Database
User Manual (User Name and Password)
Select user1 as Username
Write 1234 for Password
User Manual (Database Synchronization)
Select “Update Master Database”
User Manual (Database Synchronization)
Select “Inspection
Master Database”
User Manual (Database Synchronization)
Locate the Master Database Fileand Click on it
User Manual (Database Synchronization)
Select “Maintenanc
e Master Database”
User Manual (Database Synchronization)
Locate the Master Database Fileand Click on it
User Manual (Database Synchronization)
Select “Copy to Master Database”
User Manual (Database Synchronization)
Observe the transferred records. Click on “Close”.
History Checks/Queries
User Manual (User Name and Password)
Select user1 as Username
Write 1234 for Password
User Manual (History Option)
Select “History”
option
User Manual (History Option)
Select “Inspection
History”, and Click on “LOAD”
User Manual (History Option)
Select the Inspection
Details, and Click on “GET INSPECTION
REPORT”
User Manual (History Option)
You can make changes for the questions any
time if necessary