Russ Housley

Founder of Vigil Security, LLC

IETF Chair

Wireless@VT

1 June 2011

Emerging Wireless Internet Standards

Internet Engineering Task Force

“We make the net work” The mission of the IETF is to produce high

quality, relevant technical and engineering documents that influence the way people design, use, and manage the Internet in such a way as to make the Internet work better. These documents include protocol standards, best current practices, and informational documents of various kinds. [RFC 3935]

IETF Open Standards

While the mission of the IETF is to make the Internet work better, no one is “in charge” of the Internet. Instead, many people cooperate to make it work. Each person brings a unique perspective of the Internet, and this diversity sometimes makes it difficult to reach consensus. Yet, when consensus is achieved, the outcome is better, clearer, and more strongly supported than the initial position of any participant.

Making the Internet Better

Challenges from wireless devicesScalability – allow the Internet to support every person and device on the planetMobility – keep your connection and applications wherever you go and while you are going

Scalability

Internet of Things:Trillions of Nodes

Internet Fringe:Billions of Nodes

Internet Core:Millions of Nodes

Growth from:•Phones•Logistics•Transportation•Smart Metering•Personal Sensors•Building Automation•Industrial Automation

Internet of Things: IETF Scope

General-purpose technology (IPv6) Suitable routing mechanisms “IP over X” specifications Transport protocols and middleware Operational considerations

Not in IETF scope due to lack of expertise: Link layers, specific applications, specific

network architectures, policy issues, …

Constrained Nodes in theInternet of Things

Node: CPU with a few MHz, ~10 KB RAM,~100 KB Flash/ROM

Network: ~100 Kbit/s, high loss, high linkvariability, very limited packet size

Often battery operated, so must sleep a lot(mW • (1.0–(99.9 %)) = μW)

Example: CC2420 Sleep: 20 μA Idle: 426 μA Receive: 18.8 mA Transmit: 8.5 – 17.7 mA

IETF Working Groups (1 of 2)

6LoWPAN: IPv6 (L2 / L3 interface) for low power, low data rate radio communication (already defined IP over IEEE 802.15.4)

MANET and ROLL: IPv6 routing solutions for ad hoc networks and low power and lossy networks (LLNs), respectively

CoRE: COAP, a light weight UDP-based protocol for sensor networks

IETF Working Groups (2 of 2)

EMAN: energy measurement and management framework and MIBs

LWIG: Light-weight implementation guidance Not a profile or a new protocol Explains what μIP and other small implementations

can do to ensure small footprint

RFC 4944: IPv6 over IEEE 802.15.4

RFC 4944 provides a number of functions beyond the L2 / L3 interface to enable mapping from the IPv6 to IEEE802.15.4:Adapting packet sizesHeader compressionNeighbor discoveryPower conservationRouting topologies for mesh of devices

Routing Protocol for Low Power and Lossy Networks (RPL)

borderrouter

A distance vector routing protocol Builds Directed Acyclic Graphs (DAGs) Optimized for low-energy networks Allows building routed

networks of “things”

12

Constrained Application Protocol (CoAP) Light-weight, HTTP-like protocol Runs on UDP and supports multicast HTTP-COAP mapping

Mobility

Mobile Devices More and more capabilities: voice, video, email,

instant messaging, web browsing, geo-location

Mobile Networks Ships, trains, and planes (and soon automobiles)

Critical system using Internet protocols Connect passenger’s mobile and portable

devices

Internet Mobility Early IETF mobility work was largely done by

researchers, seeing relatively little deployment 3GPP2 and CDMA networks used Mobile IP

Today’s cellular networks use many IETF standards

Some new capabilities coming, but not too many Multiple Interfaces (MIF) with Multipath TCP

(MPTCP) is an example Avoid specialized protocols in different places Goal: one interoperable mobile Internet

Many Pieces Working Together

Internet

AccessNetwork

AccessRouter

AccessRouter

AccessPoint

Movement

AccessPoint

AccessPoint

AccessNetwork

AccessRouter

AccessPoint

Layer 2Mobility

(Not IETF)

LocalMobility

(NETLMM)

GlobalMobility

(MIP)

IETF Working Groups

MIP4, MIP6, and NETLMM: Mobile IP MIPSHOP: Performance, signaling and

handoff optimization for Mobile IP MIF: multiple simultaneous network

attachments HIP: a method of separating the end-point

identifier and locator roles of IP addresses MPTCP: Multipath TCP uses multiple

paths during a regular TCP session

Mobile IP

Mobile IPv4 is specified in RFC 3344 Mobile IPv6 is specified in RFC 3775 and

RFC 3776 Mobility allows a node to continue using its

“permanent” home address as it moves around the Internet, including maintenance of active TCP connections and UDP port bindings

Multiple Interfaces A host with multiple interfaces must select:

default router address DNS server interface for packet transmission

Some configuration objects are: global to the node local to the interface related to a particular prefix

Multipath TCP

Complements MIF – preparing for mobile end hosts with multiple radios

Allow devices to shift between links Pick to most energy efficient network connection

to increase battery life Pick “cheaper” access Avoid outages or congestion Might also pool bandwidth from multiple paths

MIF & MPTCP Example (1)

MobileNode

Server

Mo

vem

en

t

MIF & MPTCP Example (2)

MobileNode

Server

Mo

vem

en

t

MIF & MPTCP Example (3)

MobileNode

Server

Mo

vem

en

t

And Maybe …

MobileNode

Server

Mo

vem

en

t

Invitation to Participate

IETF uses an open standards process Everyone is invited to participate Even if unable to attend the face-to-face

meetings, join mail list discussions One Internet

Open standards for a global Internet Maximum interoperability Add capabilities for mobile devices Avoid specialized protocols in different places

Thank You

Russ Housley

Phone: +1 703 435 1775

Email: housley@vigilsec.com