Runway DIY Portable peplum steps xs
10
click through for the steps to DIY Portable Peplum
description
Transcript of Runway DIY Portable peplum steps xs
click through for the steps to
DIY Portable Peplum
start by laying down your fabric -
.5 yards wide and a length that is
about your waist x2.
apply some fabric glue down
each of the short sides & fold
over to prevent fraying.
fold in half length-wise with the
wrong side of the fabric facing out.
glue along the inside of the
band along the dotted line.
once the glue is dry, flip
the band right-side-out.
slide the belt in flat along
the top of the band.
secure with a dab of glue
on the inside of the X.
fold fabric toward the
buckle to create pleats.
secure each pleat with glue on
the fabric and a stitch through
both sides right beneath the belt.
runwaydiy.com