Runout & Total Run out
2
Circular runout The radial oscillation must not be greater than 0.1 mm in each plane of measurement during a complete rotation around the axis AB. Tolerance zone control
-
Upload
rambir-kaushik -
Category
Documents
-
view
327 -
download
6
description
Runout & Total Run out
Transcript of Runout & Total Run out
Circular runout
The radial oscillation must not be greater than 0.1 mm in each plane of measurement during a complete rotation around the axis AB.
Tolerance zone
control
Total runout
Tolerance zone
The total radial oscillation must not be greater than 0.1 mm in each point of the specified surface during multiple rotations around the reference axis AB, with relative axial displacement between the workpiece and the measuring instrument
control