Rugged Connectivity – Networking Devices for IoT-Applications
-
Upload
men-mikro-elektronik-gmbh -
Category
Devices & Hardware
-
view
172 -
download
3
Transcript of Rugged Connectivity – Networking Devices for IoT-Applications
Textmasterformat bearbeiten
Second Level
Third Level– Fourth Level
Fifth Level
February 17, 2017
Rugged Connectivity –Networking Devices for IoT-Applications
317.02.2017
Robust Network Devices
Scalable and application-ready
Box PC or ½ 19” system
Standard hardware based on Built-to-Order
Rugged design compliant to EN 50155 and e-mark
417.02.2017
NM50 – Mobile Gateway & WLAN Access Point
Freescale PowerPC QorIQ P1013, 800 MHz
Aluminum housing with IP30 protection
-40°to +85°C operating temperature
Ultra wide range power supply input, with interruption class S2
Electrically isolated
Compliant to EN 50155
Compliant to ISO 7637-2
517.02.2017
NM10/NM30 – Rugged 8-Port Ethernet Switch
Managed or unmanaged 8-port rugged Ethernet switch
Fast or Gb BASE-T Ethernet via M12 connectors on the front panel
PoE+ Power Sourcing Equipment (PSE ), up to 60 W output power
Special switch protocols including Quality of Service (QoS)
Up to 4096 VLANs
Redundancy and flow control
Rugged aluminium enclosure with IP40 protection
617.02.2017
NH30 – Half 19" Managed Gb Ethernet Switch
Compact 25 Port, managed rugged Layer 2/3 Gigabit Ethernet switch solution
29 Gbit/s carrier grade TCAM switching matrix and firmware
Single or redundant power supplies or uninterruptible power supply (AC or DC)
Support for up-to six line cards with Fiber, RJ45 or M12 connectors
PoE+ / non-PoE power sourcing Ethernet ports in mixed configuration
Standard Ring and Protection Switching/Ring Protocols
System supervision
717.02.2017
BL50W/BL70W – Wireless In-Vehicle Box PC
AMD Embedded G-Series or Intel Core i7 CPU
Wireless functions via 4 PCI Express Mini Card slots each with dual SIM
GPS/GLONASS interface
3 flexible slots for IBIS, RS232, RS422/485 or CAN
Compliant to EN 50155
Compliant to ISO 7637-2