RSM Catalog

2013 – Revised 11/13/2013

RSM Distribution Catalog

Catalog RSM Distribution was established as a home based “Cottage Industry” in December 1989 in order to provide a source for

those hard to find control line products that were disappearing quickly from the local hobby shop shelves. The initial

emphasis in the early years was on items such as line clips, fuel tanks, control line engines, flying lines and similar

hardware.

By 1992 it became apparent that quality control line kits were simply unavailable. Most manufacturers were eliminating

the C/L kits, concentrating on one or two simple profiles or a selection of 1/2A basic starter kits and the balance of their

production going to R/C kits. A control line flyer who wished to build anything other than a Ringmaster, Shoestring or

one of the few kits produced by SIG was forced to obtain a set of plans and scratch build. For this reason RSM

Distribution decided to get involved in kit design and manufacturing. This decision required that the company cease being

a home-based “Cottage Industry” and concentrate full time on control line supply. An industrial unit was rented and the

company moved from the owner’s garage to a warehouse/manufacturing location.

The popularity of the VSC showed that many control line flyers enjoyed the Old Time and Classic designs, which many

of us grew up with. It was decided that RSM’s primary concentration would be in this class of kits using only “contest”

weight balsa. In this way the company could provide kits that were lightweight and capable of contest level performance.

In 2001 we invested in a laser cutter. Although the machine was very expensive it offered extreme accuracy and the

ability to make very intricate cut patterns. The result was to allow RSM to produce the finest control line kit in the

marketplace. We started with the Warburton Tony and Tucker Special in 1992 and as of July 2013 we produce over 55

kits. We plan to continue to add more kits each year.

Control line kit production automatically lead the company into producing its own line of high quality control hardware

such as wire flap & elevator horns, wing tip weight boxes, flap/elevator “Lucky Boxes”, adjustable lead out guides,

carbon fiber bellcranks, stainless steel control lines, line wrapping kits, eyelets and sleeves. RSM Distribution has

responded to the increased popularity of electric power by providing electric flight components as well as complete Sport

Level and Competition Level electric power systems.

Our company policy is to continually seek out new products that can be used by the control line flyer, stock those

products or have them manufactured if they are not available and continue to add new control line kits. RSM Distribution

promises that it will always deliver products ordered as quickly as possible.

We promise that if a product is not available at the time you order it we will tell you that it is out of stock and also that we

will tell you when we expect to receive new stock. We will never cash your check or charge your credit card until the

product is actually shipped. In addition to these promises RSM Distribution guarantees if you are not completely

satisfied with any product you purchase we will either replace the product or refund your money in full. This is the

way we have done business in the past and it is the only way we will ever do business in the future.

RSM DISTRIBUTION

21899 Heliotrope Ln

Wildomar, CA 92595

Ph: (951) 678-1406

http://www.rsmdistribution.com -- [email protected]

http://www.rsmdistribution.com/

mailto:[email protected]

2013 – Revised 11/13/2013


RSM CONTROL LINE KITS RSM Controline Products kits use only the lightest, hand selected, Contest Balsa.

All parts are machine-cut and sanded.

RSM Controline Products guarantees complete satisfaction for all our kits or your money back.

Full kits include:

full-size rolled-up, plans

complete hardware package features all contest-

grade components including:

o steel control horns

o quality bellcrank

o arrowshaft pushrod,

o adjustable leadout guide

o wing-tip weight boxes

o appropriate landing and tailwheel gear

o our famous "Lucky Boxes" for flaps and

elevators

Short kits include:

100% laser cut parts

set of plans

o The builder provides:

Hardware

Covering

sheet and stick balsa

landing gear

Newest Kits Blue Max Eternal

by Kaz Minato – Japanese World Team member

Page 6

DQ Master


Page 8

Ringmaster (take apart)

Old Time Stunt Legal

Page 21

2013 – Revised 11/13/2013


RSM Full Built-Up Kits

Page Kit Name Engine Span Sq. In. Part #

5 ‘57 Nobler .35-.40 50.5 530 GBOX

5 Adams’ Special .25-.35 48.5 470 ADAM

5 Belfry Bound .46-.60 56-1/4 720 BELFULL

5 Big Job .59-.61 54 572 BIGJ

6 Blue Bird .25-.35 42 5/8 374 BBIRD

6 Blue Max Eternal .61-.76 60 679 BMAX

6 Buccaneer Mark II .35-.46 52 536 BUCK

6 Chipmunk .34-.40 51 532 DILLCHIP

7 Chizler .35-.40 51 540 CHIZ

7 Continental .46 55 572 CONTIN

7 Cougar .35-.40 54 559 COUG

7 Crusader .35-.45 53 570 CRUS

8 Derringer 46 .46-.60 56 670 DERR

8 DQ Master .46-.61 55.5 612 DQM

8 Dragon .35-.40 50 460 DRAG

8 Electra .35-.40 54 610 ELEC

9 F-4 .35-.40 50.5 525 F-4

9 Feno .25-.30 44 388 FENO

9 Fierce Arrow .40-.46 54 917 FARROW

9 Focke Wulf TA152 .46 56 597 TA152

10 Fury .40-.46 55.5 577 FURY

10 Gladiator .35-.46 58 / 67 660 / 735 GLAD

10 Grey Ghost .35-.40 54 527 GHOST

10 Hawker Hunter .46-.61 58 7/8 660 HAWK

11 Humbug .25-.40 58 500 HUMB

11 Humongous .35-.40 54 630 HUMG

11 Hurricane .35-.40 50 570 HURK

11 Jamison Special .35-.40 50 507 JAMI

12 L. A. Heat Two .35's 65 834 HEAT

12 L. A. Warmth Two .15’s 48.75 463 WARM

12 Madman .35-.40 49 411 MAD

12 ME-109 .35 52.5 557 ME109

13 Miss Kell .35-.40 54.5 557 KELL

13 Mosquito Two .35-.40’s 58 579 MOSS

13 Neptune II .35-.40 50 536 NEP

13 Oriental Plus – Full Kit .40 Tuned Pipe 56 605 OPLUS

13 Oriental Plus – Short Kit .40 Tuned Pipe 56 605 OPSHORT

14 P-40K Tiger .40-.46 56 560 P40K

14 P-51D Mustang .46-.60 56 610 P51D

14 Pathfinder LE .51 - .65 57 650 PATH

14 Pentastar .46-.61 58 / 61 654 / 693 PENT

15 Pole Dancer .40-.46 55 3/8 570 POLE

15 Ruffy .35-.40 50 545 RUFF

15 Shark 35 .35-.40 52 554 SHARK35

15 Shark 45 .45-.61 58 7/8 686 SHAR

16 Shoestring Stunter .46-.60 58 660 SHOE

16 Skylark .35-.60 SKY

16 Space Hound .35-.40 56 626 HOUND

16 Starduster 40 .40-.46 56.5 635 STAR

2013 – Revised 11/13/2013




17 Stuka Stunter .25-.29 47.25 479 STUKA

17 Stunt King .25-.35 44 436 SKING

17 Super Ringmaster .25 - .35 42 381 SRING

17 Tempest .35-.40 54 610 TEMP

18 The Lark .35-.40 52 570 LARK

18 Thunder Gazer .61-.76 60.75 630 TG

18 Thunderbird II .35-.45 56 570 TBRD

18 Thundercloud .61-.76 60 665 CLOUD

19 Trivial Pursuit – Full Kit Piped .60 60 660 TRIV

19 Trivial Pursuit – Short Kit Piped .60 60 660 TRIVS

19 Tucker Special .35-.45 53 560 TUCK

19 Venus .35-.40 50 520 VNUS

19 Warburton Tony .35-.60 56 560 TONY

RSM Profile Kits


20 Mark 1 .35 42 462 MARK1

20 Miss Sarah .35 43 380 MISSS

20 Naughty Girl .40-.46 50.25 553 NGIRL

20 P40 Tiger .35 - .40 46 490 P40P

21 P51 -15 .15 36 291 P51-15

21 P51D Electric Electric 36 291 P15E

21 Ringmaster .25-.35 42 381 RING

21 Ringmaster (take apart)

RSM 1/2 A Kits


22 Hunter Stunter .049-.061 35 225 HUNT

22 MissAshlee .049 Reed Valve 24 125 MISSA

22 Pinto .049-.061 34 220 PINT

22 Sky Sport .049-.061 30 180 SKYS

2013 – Revised 11/13/2013



‘57 Nobler

1957 “Green Box” Version

Classic Stunter

Engine: .35 - .40

Span: 50.5”

Area: 550 sq. in.

Length 38.5”

Laser Cut Ribs and Fuselage Formers

Winner 12 Nats, 2 Worlds

RSM Price $ 139.95

Part # GBOX

Adams’ Special

Old Time Legal 1950 Design

Engine: .25 - .35

Span: 48.5”

Area: 470 sq. in.

Length: 30.25”

100% Laser Cut

RSM Price $ 139.95

Part # ADAM

Belfrey Bound

Old Time Stunt Legal by Dale Kirn

Engine: .46 - .60

Span: 56.25”

Area: 720 sq. in.

Length: 35”

100% Laser Cut

RSM Price $189.95

Part # BELFULL

Big Job

OTS Legal By Addie Naccarato

Engine .59 - .61

Span: 54”

Area 572 sq. in.

Length 32.5”

100% Laser cut

RSM Price $ 179.95

Part # BIGJ

2013 – Revised 11/13/2013


Blue Bird

Classic Legal by Charles A. Mackey

Engine: .25 - .35

Span: 42.6”

Area: 374 sq. in.

Length: 26.5”

100% Laser Cut

RSM Price $ 139.95

Part # BBIRD

Blue Max Eternal by Kaz Minato – Japanese World Team member

Engine: .61 - .76

Span: 60”

Area: 679 sq. in.

Length: 45”

Laser Cut

RSM Price $ 189.95

Part # BMAX

Buccaneer Mark II

By Allen Brickhaus

Engine: .35 - .46

Span: 52”

Area: 536 sq. in.

Length: 38”

100% Laser Cut

Accurate Rib Cutouts for Jig Construction

RSM Price $ 149.95

Part # BUCK

Chipmunk

Classic Legal by Joe Dill

Engine: .35 - .40

Span: 51”

Area: 532 sq. in.

Length: 38”

100% Laser Cut

RSM Price $ 149.95

Part # DILLCHIP

2013 – Revised 11/13/2013


Chizler

Classic Legal by Dick Mathis

Engine: .35 - .40

Span: 51”

Area: 540 sq. in.

Length: 39-1/4”

100% Laser Cut

RSM Price $ 159.95

Part # CHIZ

Continental

Classic legal by Tom Warden

Engine .46

span 55”

Area 572 sq. in.

Length 39.5”

Includes a wing jig

100% laser cut

RSM Price $ 159.95

Part # CONTIN

Cougar

Classic Legal By KENHI

Engine .35 - .40

span 54 “

Area 559 sq. in

Length 36.5 “

100% Laser cut

RSM Price $ 149.95

Part # COUG

Crusader

Classic Legal Warbird by Charles A. Mackey

Engine: .35 - .45

Span: 53”

Area: 570 sq. in.

Length: 41.75”

Tricycle Landing Gear

Sleek Styling

RSM Price $ 144.95

Part # CRUS

2013 – Revised 11/13/2013


Derringer 46

1st Place 1978 NATS & the Walker Cup

by Bob Whitely!

Engine: .46-.60

Span: 56”

Area: 670 sq. in.

Length: 43-1/2”

Full Canopy

Formed Landing Gear

RSM Price $ 179.95

Part # DERR

DQ Master


Engine: .46-.61

Span: 55.5”

Area: 612 sq. in.

Length: 41.8”

Laser Cut

RSM Price $ 144.95

Part # DQM

Dragon

Old Time Stunt Legal J.C. Yates

Engine .35-.40

Span: 50”

Area: 460 sq. in.

Length: 31”

Laser Cut Kit

1st in OTS – Ignition at the

Vintage Stunt Championships 2002!

RSM Price $ 139.95

Part # DRAG

Electra

Precision Stunter by Dick Williams

Top 10 1963 NATS!

Engine: .35 - .40

Span: 54”

Area: 610 sq. in.

Length: 38”

Classic Legal

RSM Price $ 144.95

Part # ELEC

2013 – Revised 11/13/2013


F-4

By Bill Suarez

Engine: .35 - .40

Span: 50 1/2"

Area: 525 sq. in.

Rib Cut Outs for Jig

Laser Cut

Features 6 degree Anhedral Stab

RSM Price $ 169.95

Part # F-4

Feno

1955 Classic Design by Ted Goyet

Engine: .25 - .30

Span: 44”

Area: 388 sq. in.

Length: 29.5”

100% Laser Cut

RSM Price $ 139.95

Part # FENO

Fierce Arrow

Classic Legal 1957 Design

By Wild Bill Netzeband

Engine: .40 - .46

Span: 54”

Area: 917 sq. in.

Length: 32”

Weight: 44 oz.

100% Laser Cut

RSM Price $ 149.95

Part # FARROW

Focke Wulf TA152 By Keith Trostle

Engine .46

span 56 “

Area 597 sq. in.

Length 38.5”

Classic Legal

100% Laser cut

RSM Price $ 179.95

Part # TA152

2013 – Revised 11/13/2013


Fury

By Lou Wolgast

Engine .40 - .46

span 55.5”

Area 577 sq. in.

Length 38”

Classic Legal

Laser cut

RSM Price $ 149.95

Part # FURY

Gladiator

Classic Legal by Dennis Shauer

Engine: .35 - .46

Two versions included in one kit

.35 Version

Span: 58”

Area: 660 sq. in.

Stab/Elevator: 25"

.46 Version

Span: 67"

Area: 735 sq. in.

Stab/Elevator: 29"

100% Laser Cut

Accurate Rib Cut Outs for Jig Construction

RSM Price $ 159.95

Part # GLAD

Grey Ghost

Larry Scarinzi’s Classic Stunter

Engine: .35 - .40

Span: 54”

Area: 527 sq. in.

Length: 31.5”

100% Laser Cut

Formed Wire Gear


RSM Price $ 149.95

Part # GHOST

Hawker Hunter

Bob Whitely’s 1969 Classic

Engine: .46 - .61

Span 58 7/8”

Area 660 Sq. In.

Length 47.5”

100% Laser Cut Parts


RSM Price $ 189.95

Part # HAWK

2013 – Revised 11/13/2013


Humbug

Classic Legal – By “Wild Bill” Netzeband

Engine: .25 - .40

Span: 58”

Area: 500 sq. in.

Length: 29.5”

Weight: 44 oz.

100% Laser Cut

RSM Price $ 139.95

Part # HUMB

Humongous

Old Time Stunt Legal by Ted Snow

Engine: .35 - .40

Span: 54”

Area: 630 sq. in.

Length: 32-3/4”

Designed by Ted Snow in Sept. 1949

RSM Price $ 139.95

Part # HUMG

Hurricane

Semi-Scale Warbird by Jack Sheeks

Engine: .40 - .46

Span: 50”

Area: 570 sq. in.

Length: 39-1/2”

Warbird favorite!

RSM Price $ 144.95

Part # HURK

Jamison Special

Old Time Stunt Legal by Bud Jamison

Flown at the 1947 NATS!

Engine: .35 - .40

Span: 50”

Area: 507 sq. in.

Length: 32”

1st, 2

nd & 3

rd in OTS at the 2000 NATS!

RSM Price $ 139.95

Part # JAMI

2013 – Revised 11/13/2013


L.A. Heat

Twin Engine Stunt by Bob Whitely

Top 10 1987 NATS!

Engine: Two .35’s

Span: 65”

Area: 834 sq. in.

Length: 53”


RSM Price $ 199.95

Part # HEAT

L. A. Warmth

Pat King’s Twin Stunter

Inspired by Bob Whitely’s L.A. Heat

Engine: Two .15’s

Span: 48.75”

Area: 436 sq. in.

Length: 41.25”

100% Laser Cut


RSM Price $ 149.95

Part # WARM

Madman

Old Time Stunt by J.C. Yates

Engine: .35 - .40

Span: 49”

Area: 411 sq. in.

Length: 31.25”

100% Laser Cut


RSM Price $ 139.95

Part # MAD

ME-109

By Charles A. Mackey

Engine: .35

Span: 52.5”

Area: 557 sq. in.

Length: 34”

Classic Legal

Published September, 1958 in American Modeler

100% Laser Cut

RSM Price $139.95

Part # ME109

2013 – Revised 11/13/2013


Miss Kell

By Bob Whitely

Engine: .35 - .40

Span: 54.5”

Area: 557 sq. in.

Length: 37”

100% Laser Cut


RSM Price $ 149.95

Part # KELL

Mosquito

Semi-Scale Twin by Jack Sheeks

Engine: Two .35 -.40’s

Span: 58”

Area: 579 sq. in.

Length: 37.75”

100% Laser Cut

RSM Price $199.95

Part # MOSS

Neptune II

By Jim Ebejer

Engine .35 - .40

Span 50”

Area 536 sq. in.

Length 35.75 “

Classic Legal “I BEAM”

Laser cut

RSM Price $ 169.95

Part # NEP

Oriental Plus

Dee Rice’s New Tuned Pipe Stunter

Engine: .40 Tuned Pipe

Span: 56”

Area: 605 sq. in.

100% Laser Cut

Accurate rib cut outs for jig construction

Classic “Oriental” styling

RSM Full Kit Price $189.95 - Part # OPLUS

RSM Short Kit Price $149.95

Part # OPSHORT

2013 – Revised 11/13/2013


P-40K Tiger

Modern Stunter by Pat Johnston

RSM’s WARBIRD SERIES!

Engine: .40 - .46

Span: 53.25”

Area: 560 sq. in.

Length: 39.5”

RSM Price $ 159.95

Part # P40K

P-51D Mustang

SEMI-SCALE FULL STUNT!

Engine: .46 - .60

Span: 56”

Area: 610 sq. in.

Length: 39”

Designed by Pat Johnston & Eric Rule

Semi-Scale Precision Stunter

RSM Price $ 159.95

Part # P51D

Pathfinder LE

Precision Aerobatic Stunter

by Gordan Delaney

Engine: .51 - .65

Span: 57”

Area: 650 sq. in.

Length: 49”

100% Laser Cut

RSM Price $ 189.95

Part # PATH

Pentastar

By Lou Wolgast

Engine: .46 or .61

Two versions included in one kit

.46 version

Span: 58”

Area: 654 sq. in.

.61 version

Span: 61"

Area: 693 sq. in.

Carbon Fibre Bell Crank


Laser Cut Parts

RSM Price $ 189.95

Part # PENT

2013 – Revised 11/13/2013


Pole Dancer

By John Ashford

Engine: .40 - .46

Span: 55 3/8"

Area: 570 sq. in.

Length: 43"


Laser Cut Parts

RSM Price $ 149.95

Part # POLE

Ruffy

Classic Stunt Legal by Lew McFarland

Engine .35 - .40

Span: 50”

Area: 545 sq. in.

Length: 34.25”

Laser Cut Kit

RSM Price $ 139.95

Part # RUFF

Shark 35

By Lew MacFarland

Engine .35 - .40

Span 52”

Area 554 sq. in.

Length 40 “

Classic Legal

Laser cut

RSM Price $ 144.95

Part # SHARK35

Shark 45

by Lew McFarland

AUTHENTICATED NATS CHAMP!

Engine: .45 - .61

Span: 58 7/8”

Area: 686 sq. in.

Length: 41.75”

Tricycle Gear

Classic Legal

RSM Price $ 169.95

Part # SHAR

2013 – Revised 11/13/2013


Shoestring Stunter

Modern Stunter by Bob Whitely

Engine: .46 - .60

Span: 58”

Area: 660 sq. in.

Laser Cut Ribs and Fuselage Formers

RSM Price $ 199.95

Part # SHOE

Skylark

Competitive Precision Stunter

3 Versions in one kit!

Engine: .35 - .60

Builds as either “35”, “46” or “60” version

Classic Legal (46 & 35 versions)

46 version flown in 1958

35 version kitted in 1962

Span: (46 version) 56.5”

Area: (46 version) 614 sq. in.

Length: (all versions) 39.75”

Full-size plans signed by Ed Southwick

Laser Cut Ribs

RSM Price $ 179.95

Part # SKY

Space Hound

By Juri Sirotkin

Engine .35 - .40

Span 56 “

Area 626 sq. in.

Length 39.5”

Classic Legal

Laser cut

RSM Price $ 149.95

Part # HOUND

Starduster 40

By Ed Capitanelli

Engine .40 - .46

Span 56.5”

Area 635 sq. in.

Length 41”

Modern Stunt

RSM Price $ 159.95

Part # STAR

2013 – Revised 11/13/2013


Stuka Stunter

Designed in 1951 by Don Still

Engines .25 - .29

Span 47.25”

Area 479 Sq. In.

Length 33.25”



Old Time Legal

RSM Price $ 139.95

Part # STUKA

Stunt King

Published in 1950 by Bill Winter

Engine: .25 - .35

Span: 44”

Area: 436 sq. in.

Length: 29.5”

100% Laser Cut

RSM Price $134.95

Part # SKING

Super Ringmaster

Engine .25 - .35

Span 42”

Length 24.5”

Area 381 sq. in.

Classic Legal

Laser cut

RSM Price $ 134.95

Part # SRING

Tempest

Classic Legal Stunter by Bart Klapinski

1st Place 1967 NATS!

Engine: .35 - .40

Span: 54”

Area: 610 sq. in.

Length: 39”


Classic Legal

RSM Price $ 139.95

Part # TEMP

2013 – Revised 11/13/2013


The Lark

Classic Legal by Charles A. Mackey

Authenticated CLASSIC LEGAL!

Engine: .35 - .40

Span: 52”

Area: 570 sq. in.

Length: 39.75”

Popular Kit!

RSM Price $ 144.95

Part # LARK

Thunder Gazer

By David Fitzgerald

Engine: .61 - .76

Span 60.75"

Area 630 Sq. In.

10.5" Nose Moment

18.5" Tail Moment

24.75" Stabilizer Span

4" Carbon Fibre Bell Crank

Laser Cut Parts

Rib Cut Outs for Jig Construction

RSM Price $ 224.95

Part # TG

Thunderbird II

Classic Legal 1959 Version Stunter by Bob Palmer

Engine: .35 - .45

Span: 56”

Area: 570 sq. in.

Length: 39”

Autographed Full-Size Plans

Aluminum Landing Gear

RSM Price $ 139.95

Part # TBRD

Thunder Cloud

By John Ashford

Engine: .61 - .76

Span: 60"

Area: 665 sq. in.

Length: 46.5"


Laser Cut Parts

RSM Price $ 189.95

Part # CLOUD

2013 – Revised 11/13/2013


Trivial Pursuit

Precision Aerobatic Stunter

by Ted Fancher

Engine: Piped .60

Span: 60”

Area: 660 sq. in.

Length: 48”

100% Laser Cut

RSM Full Kit Price $199.95

Part # TRIV

RSM Short Kit Price $159.95

Part # TRIVS

Tucker Special

Classic Legal Precision Stunter

NATS CONTEST WINNER!

Engine: .35 - .45

Span: 53”

Area: 560 sq. in.

Length: 35”

Formed Landing Gear

RSM Price $ 144.95

Part # TUCK

Venus

OTS Legal by Jim Ebejer

Engine: .35 - .40

Span: 50”

Area: 520 sq. in.

Length: 38.8”

100% Laser Cut

OTS Legal

RSM Price $ 149.95

Part # VNUS

Warburton Tony

Classic Legal Warbird Stunter

Engine: .35 - .60

Span: 56”

Area: 560 sq. in.

Length: 37”

Classic Legal as seen in the 3/63 American Modeler

mag

1ST

PLACE ‘63 BRITISH NATS!

RSM Price $ 139.95

Part # TONY

2013 – Revised 11/13/2013


RSM Profile Kits

Mark 1

Profile Stunter for Beginners by Eric Rule

Engine: .35

Span: 42”

Area: 462 sq. in.

Profile Fuselage

Adjustable Tank Mount

RSM Price $ 89.95

Part # MARK1

Miss Sarah

Profile Sport/Stunt - “COSMIC WIND”

Engine: .19 - .35

Span: 43”

Area: 380 sq. in.

Profile Fuselage

Quick to build!

Classic Legal

RSM Price $ 79.95

Part # MISSS

Naughty Girl

By John Ashford

Engine: .40 - .46

Span: 50.25"

Area: 553 sq. in.

Length: 42 7/8"


Laser Cut Parts

RSM Price $ 119.95

Part # NGIRL

P-40 Tiger

Competitive Profile Stunter

RSM’s WARBIRD SERIES!

Engine: .35 - .40

Span: 46”

Area: 490 sq. in.

Length: 36”

1/2” Profile Fuselage

Formed Landing Gear

Ply Doublers

RSM Price $ 99.95

Part # P40P

2013 – Revised 11/13/2013


P-51 Mustang

Ron Burn’s Profile Mustang

Engines .15 - .20

Span 36”

Area 291 Sq. In.

Length 25.75”



RSM Price $79.95

Part # P51-15

Electric P-51D Mustang

Electric Flight Without the

High Price or Problems

Engine: electric

Span 36"

Area 291 Sq. In.

Length 25-3/4"



Package includes kit + motor, speed controller,

Timer/sequencer, battery & prop. All programming is

complete. Just "plug & play"

RSM Price $179.95

Part # P51E

Ringmaster


Engine .19 - .35

Span: 42”

Area: 381 sq. in.

Length: 24.25”

Laser Cut Kit

RSM Price $ 79.95

Part # RING



Engine .19 - .35

Span: 42”

Area: 381 sq. in.

Length: 24.25”

Laser Cut Kit

RSM Price $ 89.95

Part # TARING

2013 – Revised 11/13/2013


RSM 1/2 A C/L Kits

Hunter Stunter

Precision 1/2A Stunter Designed by Eric Rule

Engine: .049 - .061

Span 35”

Area: 225 sq. in.

Length 21”

Formed Landing Gear

100% Laser Cut

Flies the complete stunt pattern

RSM Price $ 74.95

Part # HUNT

Miss Ashlee

Sport and Stunt for 1/2 A Power

.049-.051 FUN!

Engine: .049 Reed Valve

Span: 24”

Area: 125 sq. in.

Length: 16-3/4”

Fun Flyer!

RSM Price $ 44.95

Part # MISSA

Pinto

Large Precision Stunter for 1/2A Power

by Dee Rice

FLYS COMPLETE PATTERN

Engine: .049 - .061

Span: 34”

Area: 220 sq. in.

Length: 21”

Formed Landing Gear

Laser Cut Kit

RSM Price $ 74.95

Part # PINT

Sky Sport

By Larry Renger

Engine .049 - .061

Span 30”

Area 180 sq. in.

Length 21”

Modern Stunt Profile

Balloon Tank included

1” Main Wheels included

Tail Wheel Skid included

Laser cut

RSM Price $ 79.95

Part # SKYS

2013 – Revised 11/13/2013


RSM Combo Deals with Engine and Plane Kit

Mark 1 Profile

Mark 1 Profile with Stock Fox 35,

Includes Tank, Wheels, glue, Handle,

Lines, Clips

Regular price: 273.58

Combo price: 219.95

Part # COM1

Electric P-51D Mustang

Electric Flight Without the

High Price or Problems

Package includes kit + motor, speed controller,

Timer/sequencer, battery & prop. All programming is

complete. Just "plug & play"

RSM Price $179.95

Part # P51E


With electric power package

The venerable RINGMASTER can be taken apart for

easy transportation. Electric Powered, it can be

carried on a commercial aircraft.

The only “Flip the switch and fly” system on the

market. Power package which includes prop, motor,

speed controller, KR Governor & Battery is fully

bench tested and comes ready to install.

RSM Price $249.99

Part # TARINGPKG

2013 – Revised 11/13/2013


Electric Control Line

General Description Electric Control Line (ECL) is simply a new and different way to power our models. Years ago when modelers

switched from ignition to glow engines they did so because glow engines offered significant advantages.

Electric motors now offer similar advantages to the modern modeler.

Benefits Anyone who has flown precision aerobatics knows that a consistent engine run is essential to top performance.

When your engine fails to give you a perfect run you find yourself wasting valuable practice time. When this

happens at a contest you are forced to take an “attempt” or you end up with a terrible score.

The major advantage of electric power is that your motor run is exactly the same flight after flight. No more

wasted flights due to a bad engine run equals more quality practice time! No more bad scores due to poor needle

settings! No more need to change the needle setting between your first and second flight!

A couple of additional benefits to electric control line are:

1) The C/G does not change during the flight as there is no fuel being drawn out of the nose of the model.

2) No hot exhaust so no requirement to fuel proof the model makes for a lighter model (improved

horsepower to weight ratio).

3) No need to wipe down the model after each flight so no more worry about fuel soaking.

4) The engine sound is all but eliminated which allows you to fly in areas you could never do so in the past.

This opens up all kinds of parks for our use.

Electric powered models have been used successfully in stunt at both the national and international level. This

quiet revolution has all but taken over in R/C pattern at the top level. Prices of batteries, motors, and ESC’s

(Electronic Speed Controllers) are now at the level where it costs around the same as flying glow engines. The

battery technology has already been improved to allow for over 200 good flights from around the 50 or 60 of a

few years ago. It is now cheaper to fly electric than glow.

For more information on Electric Control Line please visit our website at

www.rsmdistribution.com

http://www.rsmdistribution.com/

2013 – Revised 11/13/2013


Competition Level Brushless Motors

Description Part # Price

Hacker A30-10XL

Compare to .46 glow power.

Includes backmount, prop adapter and all screws.

3.5mm gold bullet connectors are provided

Peak Watts: 700

kV(RPM/V):900

Weight:6.30 oz

Shaft Diameter: 5.00mm

Operating Current: 30A

Peak Current:42A

A30 79.99

Hacker A30-8 XL Motor.

Compare to .35-.40 Glow Power.


3.5mm gold bullet connectors are provided

Peak Watts: 700

kV(RPM/V):1100

Weight:6.30 oz



Peak Current:45A

A30-8XL 79.99

A20-26M Hacker Motor.

Compare to .061 Glow Power.

Included are 2 prop adapters, plywood and aluminum motor mounts,

screws and 2 spare shafts. The motor uses a standard 3mm output

shaft.

Peak Watts: 150

kV(RPM/V):1130

Weight:1.48 oz


Peak Current:15A

A20-26M 47.99

Hacker A20-12XL


Includes mounting hardware and 2 spare shafts.

Please note - A20-XL Motors do not include backmount parts

Peak Watts: 300

kV(RPM/V):1000

Weight:2.95 oz



Peak Current:35A

HACKER

A20-1 57.99

Hacker A30-12M V2

Compare to .25 Glow Power


3.5mm gold bullet connectors are provided.

Peak Watts: 400

kV(RPM/V):1370

Weight:4.00 oz



Peak Current:35A

HACKER

A30-1 59.99

Hacker A50-12S


Peak Watts: 1700

kV(RPM/V):492

Weight:12.32 oz



Peak Current:70A

HACKER

A50-1 129.99

2013 – Revised 11/13/2013


Sport Level Brushless Motor


L2210 Brushless Motor - 1230 KV.


Bell style motor.

Kv: 1230 rpm/v

Voltage:7.4~11.1v (2~3s)

Max Current: 14A

Max Power: 150W

Shaft Size : 3mm

Weight: 50g

L2210-1230 29.99

KDA 22-20L Brushless Motor - 1050 KV.


Kv (rpm/v) 1050

Weight (g) 85

Max Current (A) 25

Power(W) 250

KDA A22-20L 39.99

KDA A36-12M Brushless Motor - 1370 KV.


Kv (rpm/v) 1370

Weight (g) 116

Max Current (A) 35

Power(W) 380

A36-12M 49.99

KDA A36-8XL Brushless Motor - 1000 KV.


Kv (rpm/v) 1000

Weight (g) 190

Max Current (A) 45

Power(W) 550

KDA A36-8XL 59.99

KDA A36-10XL Brushless Motor - 900 KV.


Kv (rpm/v) 900

Weight (g) 190

Max Current (A) 42

Power(W) 785

KAD A36-10XL 59.99

KDA K50-12S Brushless Motor.


Kv (rpm/v) 620

Weight (g) 285

Max Current (A) 55

KDA A50-12S 89.99

Speed Controllers Description Part # Price

50 Amp Hacker X55 Pro Speed Controller

With Heli Governor Mode ESP 89.99

70 Amp Hacker X70 Pro Speed Controller

With Heli Governor Mode X70SB 95.99

20 Amp ESC with BEC. Comes with all connectors soldered on. Perfect

for use with KR Governor for C/L flight.

Weight: 18g

Size: 28x2x8mm

Constant Current: 20A

Max. Current: 30A (for 10 seconds)

Input: 2-4s Li-Po ; 5-12s Ni-XX

BEC: Max. 2A@5V

20A ESC 19.99

ESC by ZTW 30 AMP with BEC. Comes with all connectors soldered

on. Use with KR Governor for C/L flight.

Weight: 28g with cable

Size: 40x28x8mm




BEC: Max. 3A@5V

30A ESC 39.99

2013 – Revised 11/13/2013


Speed Controllers Description Part # Price

ESC 50 Amp by ZTW with SBEC. Comes with all connectors soldered

on. Use with KR Governor for C/L flight.

Weight: 45g with cable

Size: 58x31x11mm




BEC: Max. [email protected] Switching DC-DC

50A ESC 49.99

70 Amp ESC by ZTW with BEC

For use with the KR Governor Timer ZTW70 69.99

Batteries Description Part # Price

Battery 3300 mAh 4 cell 14.8 Volt by Thunder Power complete with balancer plug and Deans

Connector TP3300 99.99

Battery 3300 MaH LiPo 4 Cell 14.8V 25C by Longre Power with Deans Connector and Balance

Plug. Perfect for the RSM .46 System. LP3300-4S 69.99

Battery 3300 MaH 3 Cell 25C LiPo by Longre Power complete with Deans Connector and

Balance Plug. Perfect for the RSM 35-40 System. LP3300-3S 49.99

Battery 2200 mAh 3 cell 11.1 volt 25C LiPo by Longre Power complete with balancer plug and

Deans Connector. Perfect for the RSM 15 System. LP2200 29.99

Battery 3 Cell 1300 mAh 30C. Weight 3.75 oz. Perfect for RSM .061 System AM13003S 24.99

Propellers For Electrics Description Part # Price

APC 9X6 Electric Prop Standard Pitch APC9E 3.50

APC 9X6 Electric Prop Reverse Pitch (Pusher) APC9X6 3.50

APC 10X7 Electric Prop Perfect for the RSM 35-40 System APC10X7E 3.95 APC 12-6 Electric Prop Reverse Pitch APC12EP 5.95

APC style 11 x 5.5 Electric Prop Pusher - Reverse Pitch -Perfect for the

RSM .35-.40 Electric System APC1155 4.75

APC Style 14 x 7 Electric Pusher Prop Reverse Pitch - Perfect for RSM

.65-74 System APC1470EP 11.99

APC Style 7X5 Electric Pusher Prop Reverse Pitch - Perfect for the

RSM .061 Electric Power System APC7X5EP 3.50

APC Style 8X4 Electric Pusher Prop Reverse Pitch APC84EP 3.54

APC Style 12 X 5.5 Wide Electric Pusher Prop Reverse Pitch - Perfect

for RSM .46 Electric System ASPC1255WEP 6.99

2013 – Revised 11/13/2013


Timer/Sequencers Description Part # Price

KR Governor ver.1.2. Controls RPM, Flight Time and Start delay.

Allows use of lower priced ESC to reduce cost. Gives flight

performance similar to high priced tuned pipe system. Instant stop in

event of prop jam protects your system from burn out. For use with

Version 1.0 Program Stick.

KR1 35.00

KR Governor ver.2, with Horizontal Pins & On/Off Switch. Controls

RPM, Flight Time and Start delay. Allows use of lower priced ESC to

reduce cost. Gives flight performance similar to high priced tuned pipe

system. Instant stop in event of prop jam protects your system from

burn out.

Most customers use this configuration for built-up fuselages.

KR GOV-H 42.50

KR Governor ver.2, with Vertical Pins & On/Off Switch. Controls

RPM, Flight Time and Start delay. Allows use of lower priced ESC to

reduce cost. Gives flight performance similar to high priced tuned pipe

system. Instant stop in event of prop jam protects your system from

burn out.

Most customers use this configuration for profile fuselages.

KR GOV-V 42.50

KR governor ver .2 with Retracts. The governor will allow you to equip

your model with retractable landing gear. Computer chip controls entire

flight plus the retracts. You will require a switch with this product.

Please add KR Switch.

KR GOV-R 39.99

KR Governor Activator Switch. For use in turning the ECL system on

and off. KRSWITCH 5.00

KR Governor Programmer Unit. For use with the KR Governor Ver.1

or Ver.1.2. Set Flight Time, RPM, Start Delay Time plus Power

Increase during Maneuvers. Simple to use at the flying field. KRPROG 15.00

KR Governor Program Stick Ver.2. Sets Flight Time, RPM, Start Delay

and Power Increase. For use with the KR Governor ver.2. Complete

with easy to read instruction manual. Simple to use at home or at the

flying field.

KRPROG2 15.00

KR Governor Ver .2 with Switch & Programmer KRPKG 49.50 HUBIN FM8-A (RSM) Simple RPM and Time adjustments

Pre Set for 9100 RPM, Soft Start Flight timed for 6 min 20 sec

Soft Stop Push Button extends through fuselage TMR1 30.00

KR Governor Activator Switch. For use in turning the ECL system on

and off. Great for Profile Models KRBUTTON 5.00

KR Governor designed for use with Profile Models. Pins are curved to

take up less space. Start Button instead of a Switch KRGOV-P 47.50

2013 – Revised 11/13/2013


ESC Program Cards Description Part # Price

ESC Program Card for KDA (Saker) ESC.

Although our ESC's are fully programmed for C/L flight when we ship

them you may wish to change the settings.

This programming card works with all of the models of KDA (Saker)

Speed Controllers that we carry.

It provides a quick easy way to set all of the speed controller

programming options at the same time.

To use this programming card you simply set the jumper pins to the

desired ESC parameter values and then plug the card into the control

lead on your ESC and attach a motor to the output leads of the speed

controller. When you power up the controller with the motor battery,

the ESC will download and store the new values into it's internal

memory. After you hear one short beep from the motor, the program is

loaded and you can unplug the motor battery from the speed controller.

Now you can remove the program card and plug the control lead back

into the KR Governor

KDACARD 9.99

ESC Program Card for ZTW ESC.

Although our ESC's are fully programmed for C/L flight when we ship

them you may wish to change the settings.

This programming card works with all of the models of ZTW Speed

Controllers that we carry.

It provides a quick easy way to set all of the speed controller

programming options at the same time.

To use this programming card you simply set the jumper pins to the

desired ESC parameter values and then plug the card into the control

lead on your ESC and attach a motor to the output leads of the speed

controller. When you power up the controller with the motor battery,

the ESC will download and store the new values into it's internal

memory. After you hear one short beep from the motor, the program is

loaded and you can unplug the motor battery from the speed controller.

Now you can remove the program card and plug the control lead back

into the KR Governor.

ZTWCARD 9.99

2013 – Revised 11/13/2013


Battery Chargers/Misc. Description Part # Price

Thunder Power TP6-10C

Input Power: 11-16V DC 10Amp at maximum charge rate

Memory for each Battery type

Charge battery type: LiPoly/NiMH/NiCd/Pb/A123 Charge voltage and cells:

LiPoly battery: 1 - 6 cells CC to CV change voltage: 4.1 V/cell

Full Charge Voltage 4.2 V/Cell

NiMh, NiCd Battery: 1 - 14 cells, Pb(SLA) battery: 6V/12V/24V ,A123

Battery: 1 - 6 cells

TP610C 119.95

Imax B6 AC Dual Power Charger

AC 100~240v or 12V DC input

Microprocessor controlled

Individual cell balancing

Charges Li-ion, LiPo, LiFe, Ni-Cd, NiMH, and PB batteries

Input voltage monitoring. (Protects car batteries at the field)

Data storage (Store up to 5 packs in memory)

Battery break in and cycling

Ni-MH/NiCd cells: 1~15

Li-ion/Poly cells: 1~6

Pb battery voltage: 2~20v

IMB6AC 74.99

Hacker USB Interface programmer for Windows LINK 14.99

Deans Connector Male (2) WSD1302 3.59

Deans Connector Female (2) WSD1303 2.69

Safe Charging Bag for your Lipo Battery

Protect your family and home from the hazard of lipo charging.

This lipo-guard is a fireproof bag, designed to stop and contain the fire caused

by incorrectly or poorly functioning lipos, especially during charging.

We urge all customers to always practice extreme caution when charging and

never leave a charging battery unattended.

This pack is the small size. It is 18x22cm. It will fit three 2200mah 3S1P packs

comfortably.

The LP-Guard is made from a fibreglass woven fabric. Similar to fireproof suits

worn by some firefighters

CHGBAG 7.99

Battery Checker

Battery Capacity Controllor. LED readout of capacity in Li-Po battery at a

glance. Also checks balance of each cell. Small and compact it fits in your field

box.

BATTCHECK 24.95

2013 – Revised 11/13/2013


Electric Control Line Systems

Complete systems from RSM Distribution are flight tested. They come with all connectors installed. Flight parameters are

fully programmed. Just mount, flip the switch and fly. No set up or computer is required to operate.

Competition Level


RSM 061 Electric Power System

Equal to .061 Glow Power. Hacker A20-34S motor, 12 AMP ESC, KR Governor, 910 mAh 3S 25C Battery & 6x5.5

prop. Comes with all programming installed.

RSM061SYSC 169.99


Equal to .15 Glow Power. Hacker A20-12XL motor, 30 AMP ESC, KR Governor, 2200 mAh 3S 25C Battery & 9x6

Pusher prop. Comes with all programming installed.

RSM15SYSC 220.99


Equal to .25 Glow Power. Hacker A30-12M motor, 50 AMP ESC, KR Governor, 3300 mAh 3S 25C Battery & 10x7


RSM25SYSC 224.99


Equal to .35 - .40 Glow Power Hacker A30-8XL motor, 50 AMP ESC, KR Governor, 3300 mAh 3S 25C Battery & 11x5.5


RSM35SYSC 274.99


Equal to .46 Glow Power Hacker A30-10XL motor, 70 AMP ESC, KR Governor, 3300 mAh 4S 25C Battery & 12x6


RSM46SYSC 329.99

RSM 61-74 Electric Power System

Equal to .61 - .74 Glow Power Hacker A50-12S motor, 70 AMP ESC, KR Governor, 3900 mAh 6S 25C Battery & 14x7


RSM6174SYSC 424.99

2013 – Revised 11/13/2013


Sport Level Description Part # Price


Equal to .061 Glow Power. Includes KDA A20-26M Motor, 20 Amp Speed Controller, KR Timer/Sequencer, 1300 mAh 3

cell Battery & 8 x 5 Prop. Comes with all programming installed.

RSM061SYS 139.99


Equal to .15 Glow Power. Includes KDA A22-20L Motor, 30 Amp Speed Controller, KR Timer/Sequencer, 2200 mAh 3

cell Battery & 9 x 6 PusherProp. Comes with all programming installed.

RSM15SYS 139.99


Equal to .25 Glow Power. KDA A30-12M Motor, 40 AMP ESC, KR Governor, 3300 MaH 3 cell Lipo Battery, 10 x 7

Pusher Prop. Fully Programmed Ready to Fly

RSM25SYS 184.99


Equal to .35 - .40 Glow Power KDA A30-8XL Motor, 45 AMP ESC, KR Governor, 3300 MaH 3 cell Lipo Battery, 11 x 5.5

Pusher Prop. Fully Programmed Ready to Fly

RSM35SYS 186.99


Equal to .46 Glow Power Includes KDA A30-10XL Motor, 45 Amp Speed Controller, Timer/Sequencer, 3300 mAh 4

cell 25C Battery & Prop. Comes with all programming installed.

RSM46SYS 244.99

RSM 61-74 Electric Power System

Equal to .61 - .74 Glow Power Includes KDA-K5012S-620 Motor, 70 Amp Speed Controller, Timer/Sequencer, 4000 mAh 6

cell 35C Battery & 14x7 Prop. Comes with all programming installed.

RSM6174SYS 314.99

Electric Packages Description Part # Price

Electric Powered P51-D Profile. Profile Aerobatic Stunter powered by RSM 15

Electric System.

Equal to .15 glow power.

Package includes Kit, Electric Motor, Speed

Controller, KR Governor, Switch & Battery.

All programming necessary to fly the

complete AMA Stunt Pattern. Fully field

tested by stunt flyers.

P15E 179.95

The venerable RINGMASTER can be taken

apart for easy transportation. Electric

Powered, it can be carried on a commercial

aircraft.

The only “Flip the switch and fly” system on

the market. Power package which includes

prop, motor, speed controller, KR Governor &

Battery is fully bench tested and comes ready

to install.

TARINGPKG 249.99

2013 – Revised 11/13/2013


Building Supplies

Plans for RSM Kits All RSM plans are printed on white bond paper using a plotter.

They come rolled in a shipping tube.

Profile Stunters Name Description Pages Price Part #

Mark 1 Beginner Trainer for .35 by Eric Rule 1 15.00 M1PLN

Miss Ashlee 1/2A Profile for Cox Baby Bee 1 10.00 MAPLN

Miss Sarah “Cosmic Wind” Profile for .35 1 15.00 MSPLN

OTS Ringmaster Ringmaster by M. Kania 1 15.00 RGPLN

P40 Warhawk Precision Profile for .35 by Eric Rule 1 15.00 P40PLN

P51-15 Profile Stunter for .15 by Ron Burn 1 15.00 P15PLN

Old Time Legal Name Description Pages Price Part #

Adams’ Special 1950 Stunter by Frank Adams 1 15.00 ADPLN

Belfrey Bound Dale Kirn’s “Bat like” Stunter 1 15.00 BBPLN

Big Job Adie Naccarato’a Big Job 1 15.00 BJOBPLN

Dragon J.C. “Madman” Yates’ design 1 15.00 DGPLN

Humongeous 1949 design by Ted Snow 1 15.00 HUPLN

Jamison Nats Winner by Bud Jamison 1 15.00 JMPLN

Madman J.C. “Madman” Yates design 1 15.00 MADPLN

OTS Ringmaster Matt Kania’s Profile 1 15.00 RGPLN

Stuka Don Still’s design 1 15..00 STPLN

Stunt King Stunt King 1 15.00 SKINGPLN

Venus Venus by Jim Ebejar 1 15.00 VNPLN

Classic Legal Stunters Name Description Pages Price Part #

Blue Bird Charlie Mackey’s First Published Design 1 15.00 BBDPLN

Chipmunk By Joe Dill 1 15.00 CHIPPLN

Continental Continental by Tom Warden 1 15.00 CONTPLN

Cougar Cougar Stunter 1 15.00 COUGPLN

Crusader Twin Boom for .35 by Charles Mackey 1 15.00 CRPLN

Electra Nats Winner by Dick Williams for .35 1 15.00 ELPLN

Feno 1959 design by Ted Goyet for .25 1 15.00 FNPLN

Fierce Arrow “Wild Bill” Netzeband’s Delta Wing 1 15.00 FAPLN

Fury Fury by Lew Wolgast 1 15.00 FURYPLN

Gladiator By Dennis Shauer 1 15.00 GLADPLN

Grey Ghost Grey Ghost by Larry Scarinzi 1 15.00 GHSTPLN

Hawker Hunter 1969 Classic by Bob Whitely 1 20.00 HAWPLN

Humbug Classic Stunter by “Wild Bill” 1 15.00 HUMPLN

Lark Classic Legal for .35 by Charles Mackey 1 15.00 LKPLN

ME 109 ME 109 by Charles Mackey 1 15.00 ME109PLN

Miss Sarah “Cosmic Wind” Profile for .35 1 15.00 NEPPLAN

Neptune II Classic “I-beam” by Jim Ebejer 1 15.00 MSPLN

Nobler 1957 “Green Box” Nobler Classic Legal 1 15.00 NOPLN

Pinto 1/2A Precision by Dee Rice 1 10.00 PIPLN

2013 – Revised 11/13/2013


Classic Legal Stunters Name Description Pages Price Part #

Ruffy Lew MacFarland’s Nats Winner for .35 1 15.00 RUPLN

Shark 35 by Lew MacFarland 1 15.00 SHR35PLAN

Shark 45 Nats Winner by Lew MacFarland for .46 or

.60

1 15.00 SKPLN

Skylark Ed Southwick’s Classic Winner for .35 or

.46

1 15.00 SYPLN

Space Hound Space Hound 1 15.00 HNDPLN

Super Ringmaster Super Ringmaster 1 15.00 SRNGPLN

T Bird II Bob Palmer’s 1959 Nats Winner for .35 1 15.00 TBPLN

Tempest Nats Winner by Bart Klapinski for .35 1 15.00 TMPLN

Tony 1963 British Nats Winner by Frank

Warburton

1 15.00 TYPLN

Tucker Special Nats Winner by Bob Tucker for .35 1 15.00 TKPLN

Modern Stunters Name Description Pages Price Part #

Buccaneer II Buccaneer Mark II by Allen Brickhaus 1 15.00 BUCPLN

Derringer 46 Nats Winner by Bob Whitely for .46 1 15.00 DRPLN

Hunter Stunter 1/2A Precision Stunter by Eric Rule 1 10.00 HTPLN

Hurricane Semi Scale for .35 by Jack Sheeks 1 15.00 HKPLN

L.A. Heat Twin Engine by Bob Whitely 1 20.00 LAPLN

L.A. Warmth Twin .15 inspired by Bob Whitely’s L.A.

Heat

1 20.00 WARMPLN

Miss Kell Miss Kell by Bob Whitely 1 15.00 KELLPLN

Mosquito Twin Engine by Jack Sheeks 1 20.00 MOSSIEPLAN

Oriental Plus by Dee Rice for .40 Tuned Pipe 1 15.00 OPPLN

P40K Precision Stunter for .40 by Pat Johnston 1 15.00 P4KPLN

P51D Precision Stunter for .46 by Eric Rule 1 15.00 P51PLN

Pentastar 46 Lou Wolgast's 46 sized Pentastar 1 15.00 PENPLN

Pentastar 61 Lou Wolgast's 61 sized Pentastar 1 20.00 PENPLN60

Shoestring 2000 Bob Whitely’s 2000 Nats Model .50 tuned

pipe

1 20.00 SHPLN

Starduster Starduster by Ed Capitanelli 1 15.00 STARPLN

Thunder Gazer David Fitzgerald's World Champion 1 20.00 TGPLN

All laser cut part outlines 1 20.00 TGPARTS

Assembly drawings including pictures of

take apart assemblies

1 20.00 TGDWG

Set of all three drawings 1 45.00 TGSET

Trivial Pursuit Ted Fancher’s Special Edition .60 tuned

pipe

1 20.00 TPPLN

2013 – Revised 11/13/2013


Laser Cut Rib Sets from Hobby Fastener Kits Description Part # Price

“Adams’ Special” Rib Set ADMRIB 29.99

“Belfry Bound” Rib Set BELRIB 39.99

“Big Job” Rib Set BJOBRIB 29.99

“Blue Bird” Rib Set BBRDRIB 29.99

“Buccaneer” Rib Set BUCRIB 39.95

“Chipmunk Rib Set CHIPRIB 34.95

“Continental” Rib Set CONTRIB 39.95

“Cougar” Rib Set COUGRIB 39.95

“Derringer 46” Rib Set DERRIB 29.99

“Dragon” Rib Set DRAGRIB 29.95

“Electra” Rib Set ELECRIB 29.99

“Feno” Rib Set FNRIB 29.99

“Fierce Arrow” Rib Set FARIB 29.99

“Fury” Ribs FURYRIB 39.95

“Gladiator” Rib Set GLADRIB 34.95

“Green Box Nobler” Rib Set NOBRIB 29.99

“Grey Ghost” Rib Set GHSTRIB 39.95

“Hawker Hunter” Rib Set HAWKRIB 39.99

“Humbug” Rib Set HBUGRIB 29.99

“Humongous” Rib Set HUMRIB 29.99

“Hunter Stunter” Rib Set HTRRIB 19.99

“Jamison Special” Rib Set JAMRIB 29.99

“L.A. Heat” Rib Set LARIB 39.99

“L.A. Warmth” Ribs WARMRIB 39.95

“Mackey Crusader” Rib Set CRURIB 29.99

“Mackey Lark” Rib Set LARKRIB 29.99

“Madman” Rib Set MADRIB 29.99

“Mark 1” Rib Set MARKRIB 29.99

“ME 109” Ribs MERIB 39.95

“Miss Ashlee” Rib Set ASHRIB 19.99

“Miss Kell” Ribs KELLRIB 39.95


“Miss Sarah” Rib Set SARRIB 29.99

“Mosquito” Rib Set MOSSIERIB 29.99

“Neptune II” Rib Jig NEPJIG 5.99

“Oriental Plus” Rib Set OPLUSRIB 39.99

“Oriental” Rib Set ORRIB 29.99

“OTS Ringmaster” Rib Set RINRIB 29.99

“P40” Profile Rib Set P40RIB 29.99

“P40K Tiger” Rib Set P40KRIB 29.99

“P51-15” Rib Set P15RIB 29.99

“P51D Mustang” Rib Set P51DRIB 29.99

“Pathfinder LE” Rib Set PATHRIB 34.99

“Pentastar” Rib Set PENRIB 34.99

“Pinto” Rib Set PINRIB 19.99

“Ruffy” Rib Set RUFRIB 34.99

“Shark 35” Rib Set SHAR35RIB 29.99

“Shark 45” Rib Set SHARRIB 34.99

“Sheeks Hurricane” Rib Set HURKRIB 29.99

“Skysport” Rib Set SKYRIB 34.99

“Starduster 40” Ribs STARRIB 39.95

“Stills Stuka” Rib Set STURIB 29.99

“Ta-152” Rib Set TARIB 34.99

“Tempest” Rib Set TEMRIB 29.99

“Thunderbird II” Rib Set TBRIB 29.99

“Trivial Pursuit” Rib Set TPRIB 39.99

“Tucker Special” Rib Set TUCKRIB 29.99

“Venus” Rib Set VENRIB 29.99

“Warburton Tony” Rib Set TONYRIB 29.99

“Yates Dragon” Rib Set DRARIB 34.99

Southwick “Skylark” Rib Set SKYRIB 34.99

Whitely “Shoestring” Rib Set SHOERIB 39.99

Wheel Pants and Strut Covers Description Part # Price

“Crusader” Trike Wheel Pants WPCRUS 21.99

“Derringer 46” Strut Covers WPDER 7.99

“Electra” Strut Covers WPELEC 7.99

“Hurricane” Strut Covers WPHURK 7.99

“L.A. Heat” Strut Covers WPHEAT 7.99

“Lark” Wheel Pants WPLARK 14.99

“Nobler” Strut Covers WPNOB 7.99

“P40K” Strut Covers WPP40K 7.99


“P51D Mustang” Strut Covers WPP51D 7.99

“Pinto” Wheel Pants WPPINTO 12.99

“Shark 45” Strut Covers WPSHAR 7.99

“Shoestring” Wheel Pants WPSHOE 14.99

“Tempest” Strut Covers WPTEMP 7.99

“Tucker Special” Wheel Pants WPTUCK 14.99

“Warburton Tony” Strut Covers WPTONY 7.99

2013 – Revised 11/13/2013


Wheels

Dave Brown Wheels If you are putting the wheels into wheel pants the Lectra-Lite are a perfect choice!

Lectra-Lite wheels are approximately 2/3 the thickness of the regular Lite-Flite wheels.

Lite-Flite Wheels Description Part # Price

1-1/2” Treaded DB5715 4.50

1-3/4” Treaded DB5717 5.25

2” Treaded DB5720 5.50

2-1/4” Treaded DB5722 5.75

2-1/2” Treaded DB5725 6.25

2-3/4” Treaded DB5727 6.75

3” Treaded DB5730 7.25

Lectra-Lite Wheels Description Part # Price

1-3/4” Narrow Treaded DB5817 5.25

2” Narrow Treaded DB5820 5.50

2-1/4” Narrow Treaded DB5822 5.75

Tailwheels Description Part # Price

3/4” Plastic Tailwheel SH451 1.75

3/4” Aluminum Hub Rubber

Tread

DU75TW 2.25

1” Aluminum Hub Rubber

Tread

DU100TW 2.40

1-1/4” Aluminum Hub Rubber

Tread

DU125TW 2.55

Landing Gear

Profile Main & Tailwheel Gear Description Part # Price

Long Duralloy Gear - fits

Twister and similar models

PLGL 13.99

Short Duralloy Gear - fits

Ringmaster - Flight Streak

and similar models

PLGS 11.95

1/8” Wire with clips &

eyelet

BM011 2.99

Profile Tailwheel Mount PTWM 1.95

Built-Up Main & Tailwheel Gear Description Part # Price

1/8” Grooved Block Mount

Pkg

LGM18 2.99

Fuse. Mount Duralloy Gear

– Large

BULG-L 13.99

1/8” Wire Wing Mount Gear BM016 3.99

Trike “Shark” 1/8 Wire Gear BM022 5.99

Trike “L.A. Heat” 1/8 Wire

Gear

BM023 5.99

Trike “Tempest” 1/8 Wire

Gear

BM024 5.99

Full Body Tailwheel Gear FTWM 2.99

2013 – Revised 11/13/2013


Canopies from Hobby Fasteners Kits Description Part # Price

“Adams’ Special” Canopy ADMCAN 7.99

“Blue Bird” Canopy BBRDCAN 7.99

“Chipmunk” Canopy CHIPCAN 8.99

“Cougar” Canopy COUGCAN 7.99

“Derringer” Jet Canopy CDER 12.99

“Fierce Arrow” Canopy FACAN 7.99

“Green Box Nobler” Canopy NOCAN 5.99

“Grey Ghost” Canopy GHOSTCAN 3.99

“Hawker Hunter” Canopy HHCAN 12.99

“Hunter Stunter” Canopy HSCAN 5.99

“Hurricane” Canopy HURCAN 7.99

“Jamison Special” Canopy JAMICAN 5.99

“L.A. Heat” Canopy WC813 9.99

“L.A. Warmth” Canopy WARMCAN 7.99

“Mackey Crusader” Canopy WC807 5.99

“Mackey Lark” Canopy LARKCAN 7.99

“Madman” Canopy MADCAN 7.99

“ME-109” Canopy CANME 7.99

“Miss Kell” Canopy KELLCAN 7.99

“Mosquito” Canopy MOSSCAN 12.99


“Neptune II” Canopy NEPCAN 7.99

“Oriental Plus” Canopy OPLUSCAN 7.99

“P40K” Canopy P40KCAN 12.99

“P51D” Canopy WC809 7.99

“Pathfinder LE” Canopy PATHCAN 12.99

“Pinto” Canopy CS005 5.99

“Ruffy” Canopy RUFFCAN 7.99

“Shark 35” Canopy SHR35CAN 5.99

“Shark 45” Canopy SHARCAN 5.99

“Shoestring” Canopy SHOECAN 12.99

“Skylark” Canopy CANSKY 7.99

“Space Hound” Canopy HOUNDCAN 11.99

“Stills Stuka” Canopy STCAN 8.99

“Ta-152” Canopy TACAN 12.99

“Tempest” Canopy TEMPCAN 12.99

“Thunderbird” Canopy TBCAN 7.99

“Tony” Canopy TONYCAN 12.99

“Trivial Pursuit” Canopy TPCAN 7.99

“Venus” Canopy VENCAN 7.99

Covering Materials

Chinese Silk - The finest quality with a much tighter weave than ordinary silk. This means that you will use less dope to

fill this silk, which will result in a lighter finish. Polyspan is a polyester tissue that is waterproof and much stronger than silkspan. Finishing methods are similar to silk

and silkspan

Chinese Silk


Light Silk 48” X 36” LS002 12.99

Silk Span Description Part # Price

Light weight Silkspan OO 2.05

Medium weight Silkspan GM 2.35

Polyspan


Polyspan covering 12ft X 20” roll PSPAN 18.00

2013 – Revised 11/13/2013


Miscellaneous Building Supplies

Heat Shrink Tubing Description Part # Price

1/16” – 5 pieces HF435 1.49

3/32” – 5 pieces HF436 1.49

1/8” – 5 pieces HF437 1.49

3/16” – 4 pieces HF438 1.49

1/4” – 4 pieces HF439 1.49

3/8” – 4 pieces HF440 1.49

Assorted sizes

(2 pieces each size)

HF441 4.50

1/16” X 18” – 2 pieces HF435B 2.50

3/32” X 18” – 2 pieces HF436B 2.50

1/8” X 18” – 2 pieces HF437B 2.50

3/16” X 18” – 2 pieces HF438B 2.50

Carbon Fiber Tapes, Mats, and Strips Description Part # Price

3/10 oz per Sq Yard Mat – 36”x36” CFMAT1 16.99

Razor Blades Description Part # Price

Single Edge Razor Blade #9 – 8 pack HF400 1.29

Mounting Tools and Balsa Gauge Description Part # Price

RSM Balsa Gauge GAUGE $3.99

RSM Engine Mounting Tool for OS

35-40 FP & LA 35-40 & 46 OSMNT $2.99

RSM Engine Mounting Tool for ST

40 & 46 ST46MNT $2.99


G 51 51MNT $2.99


60 ST60MNT $2.99

Control Horns


Laser Cut 1/8” Elevator Horns SHORN .99

Laser Cut 3/16” Elevator Horns RHORN .99

“T” Style Nylon Medium

(2 pack)

SH221 .75

RSM 3/32” Flap Horn (3 hole) HF332-3 7.49

RSM 1/8” Flap Horn (3 hole) HF18-3 7.49

RSM 3/32” Elevator Horn HF332-2 7.49

RSM 1/8” Elevator Horn HF18-2 7.49

3/32” Wire Horn “Lucky” Boxes HFLB332 2.75

1/8” Wire Horn “Lucky” Boxes HFLB18 2.75

Cyanoacrylate Glue (CYA) Description Part # Price

1 oz Thin CyA HFCA1 4.99



1 oz Gap Filling CyA HFCAG1 4.99



1 oz Extra Thick CyA HFCAT1 4.99



2 oz Accelerator with Pump HFCAAC2 4.99

8 oz Accelerator Refill HFCAAC8 9.99

1 oz Replacement Bottle HFBOT1 .95

2 oz Replacement Bottle HFBOT2 1.49

Replacement Bottle Cap HFCAP .99

8” CyA Applicator – 12 pack DB8100 6.99

Lead Weights and Weight Boxes Description Part # Price

1/4 oz with mounting hole – 6 SH561 375

3 oz strip in 1/4 oz snap offs – 2 HF280 5.49

Adjustable Wing Tip Weight Box

Uses SH561 ¼ oz weights

HFWTB 3.99

Music Wire Description Part # Price

3/32” x 36” Long MW332 1.10

1/8” x 36” Long MW18 1.15

Bellcranks


Fox 2” Aluminum FX86778 8.00

Nylon 3” HF1001 2.99

Fox 3” Aluminum FX86779 8.00

Sig 4” Nylon SH754 7.50

4” Nylon Suspended Bellcrank HF1002 9.99

4” Carbon Fiber, Suspended

Bellcrank

HF1003 19.99

Pushrods


Single 30” Pushrod System HF549 5.95

1/4” x 30” Glass fiber Pushrod CB1 4.50

2013 – Revised 11/13/2013


Control Line Engines

Stock Engines


Magnum .15 XLS Engine MAG15 89.95

OS 25 LA C/L OSLA25 94.99

OS 46 LA C/L OSLA46 109.95

Engine Accessories

Tongue and Tube Mufflers Description Part # Price

Tongue Muffler for Fox 35 & OS40 TMUF 19.95

Tongue Muffler for Brodak .25 & .40 TMUFB 21.95

Tongue Muffler for OS 35S, K&B 40 &

OS 25 FP

TMUFOS35S 21.95

Tongue Muffler for Super Tigre 46-

51&60

TMUFST 21.95

Tube Muffler for Fox 35 & OS35-40FP TUBEFX 39.95

Tube Muffler for LA.46 TUBELA46 39.95

Tongue Muffler for Fox 35 & OS40 TMUF 19.95

Tongue Muffler for Brodak .25 & .40 TMUFB 21.95

Tongue Muffler for OS 35S, K&B 40 &

OS 25 FP

TMUFOS35S 21.95

Tongue Muffler for Super Tigre 46-

51&60

TMUFST 21.95

Glow Plugs

Fireball Glow Plugs


Standard Long Plug S20L 3.49

Standard Short Plug S20S 3.49

R/C Long Plug with Idle Bar S20RCL 3.95

R/C Short Plug with Idle Bar S20RCS 3.95

Extra Hot Long Plug H30L 3.49

Extra Hot Short Plug H30S 3.49

Super Cool High Nitro Long

Plug

SC10L 3.95

Super Cool High Nitro Short

Plug

SC10S 3.95

2013 – Revised 11/13/2013


Fox Parts Description Part # Price

Hemi Head for Fox .35 designed by

Larry Foster

LJ35H 34.95

Backplate Stuffer for Fox .35 FX13511H 19.25

Laser cut Custom Back Plate Gasket FX35BP 1.99

Standard Piston & Liner for Fox .35 FX35050 65.50

Crankshaft for Fox .35 FX35170 26.00

Crankshaft Stud for Fox .40 FX40185 3.50

Thrust Washer for Fox .35 FX35220 15.80

Prop Washer for Fox .35 FX35230 6.00

Crankcase for Fox .35 FX35100 36.40

Standard Muffler for Fox .35 FX9225 20.95

Venturies Description Part # Price

Delrin Venturi for

OS .35-.40 FP

VENOS 9.99

Delrin Venturi for OS LA .46 VENLA46 11.99

Delrin True Venturi for

SuperTigre 46

VENST46 16.99

Delrin True Venturi for

SuperTigre 60

VENST60 16.99

Delrin Venturi for OS LA 25 VENLA25 9.99

Delrin Venturi for Magnum .15 VENXLS 19.99

Needle Valves Description Part # Price

Super Tigre .51 Needle Valve

Assembly (Fits Fox .35)

STNVA 9.99

Super Tigre Long Needle STNV 2.99


Assembly (fits OS .40FP)

STNVA46 14.99


Assembly

STNVA60 16.99

Prop Shaft Extensions Description Part # Price

10-32 x1/2 Prop Extension FX90410 8.00

10-32 x 3/4 Prop Extension FX90411 8.00

1/4-28 x 1/2 Prop Extension FX90412 8.00




Mounting Pads and Templates Description Part # Price

Phenolic Engine Mounting Pads (2) HFEP 1.99

RSM Engine Mounting Tool for

OS 35-40 FP & LA 35-40 & 46

OSMNT 2.99

RSM Engine Mounting Tool for

ST 40 & 46

ST46MNT 2.99

RSM Engine Mounting Tool for ST G

51

51MNT 2.99


60

ST60MNT 2.99

Screw and Gasket Sets Description Part # Price

Laser Cut Custom Back Plate

Gasket for Fox .35

FX35BP 1.99

"Back Plate Gasket" for LA .25 LAS25BP 1.99

"Back Plate Gasket Kit" for LA

.25

LAS25BPK 5.75

"Back Plate Gasket Kit" for LA

.46

LAS46GK 3.95

Screws & Gasket Set for

Fox .35

FX35SG 3.99

Gasket Set for ST 60 ST60G 3.99

Socket Head Bolt Set for

Fox .35

FX35SH 2.99

2013 – Revised 11/13/2013


Propellers RSM Propellers

CNC machined on a 3 axis router to insure that both blades are identical

High quality finish applied to resist fuel deterioration

Smooth prop face combined with thin blade reduces load on engine

Efficient airfoil shape


RSM Propeller 9-6 RSM0906 5.99



RSM Propeller 12-5.5 RSM1255 7.25

RSM Propeller Test Data

CNC machined on a 3 axis router to insure that both blades are identical

High quality finish applied to resist fuel deterioration

Smooth prop face combined with thin blade reduces load on engine

Efficient airfoil shape

20 thousands of an inch undercamber to increase thrust

Pitch of Props

Using a Prather Pitch Gauge we measured Stations 7 & 10 (which is the area that the propeller uses to create thrust) to

determine the actual pitch.

10” Prop 11” Prop

Station 7 5.5 5.9

Station 10 5.2 4.8

Static Testing

We compared the RSM 10” prop against the Rev-Up 10-6 EW and the George Aldrich Custom Special 10-6. Engine used

was a Hunter .19 diesel. This engine was chosen to determine how much the test props would load down the engine.

Optimum engine performance was obtained for each prop tested.

Prop Tested RPM

Achieved

Static Thrust

Rev-Up 10-6 EW 7400 28 oz

Aldrich 10-6

Custom

7400 28 oz

RSM 10-6 8600 36 oz

This test showed that the RSM prop had 20% more static thrust while not loading down the engine.

2013 – Revised 11/13/2013


Prop Wrenches and Reamers Description Part # Price

Fox 4-Way Prop Wrench FX70104 15.95

Fox 4-Step Reamer FX70201 12.00

Fox 7-8mm Reamer FX70202 12.00

Fox 10mm Reamer FX70203 12.00

Spinners

Aluminum Description Part # Price

1-3/4” – weight 8/10 oz VOR175 20.95

2” – weight 1-1/10 oz VOR200 21.95

2-1/4” – weight 1-1/2 oz VOR225 22.95

1-3/4” Needle Nose VOR175N 26.95

2” Needle Nose VOR200N 27.95

2-1/4” Needle Nose VOR225N 29.95

1/4-28 adapter nut short NUT1 5.95

1/4-28 adapter nut long NUT2 5.95

Carbon Fiber Description Part # Price

1-3/4” (42mm) CF175 29.99

2” (52mm) CF200 32.99

2-1/4” (58mm) CF2125 37.99

Plastic Color Size Part # Price

White 1-1/2” SH15-1 3.89

1-3/4” SH175-1 4.39

2” SH20-1 4.99

2-1/4” SH225-1 5.79

Black 1-1/2” SH15-2 3.89

1-3/4” SH175-2 4.39

2” SH20-2 4.99

2-1/4” SH225-2 5.79

Red 1-1/2” SH15-3 3.89

1-3/4” SH175-3 4.39

2” SH20-3 4.99

2-1/4” SH225-3 5.79

Color Size Part # Price

Blue 1-1/2” SH15-4 3.89

1-3/4” SH175-4 4.39

2” SH20-4 4.99

2-1/4” SH225-4 5.79

Yellow 1-1/2” SH15-5 3.89

1-3/4” SH175-5 4.39

2” SH20-5 4.99

2-1/4” SH225-5 5.79

Fuel Lines, Filters, and Fillers

In-Line Fuel Filters Description Part # Price

“Crap Trap” Filter SU187 4.90

Fuel Filler Syringes Description Part # Price

5 oz Monoject Syringe HF679 11.95

High Heat Silicone Fuel Line Description Part # Price

.062 I.D. Silicone Fuel Line 2 ft FLM2 3.49

.062 I.D. Silicone Fuel Line 25 ft FLM25 34.95

2013 – Revised 11/13/2013


Tanks

If you have an application that requires a special tank, please contact our office at

(951) 678-1406 to discuss your needs.

Profile Uniflow (HF Style) 2” Wide X 1” High

Capacity Length Part # Price

2 oz. 2 in. HF200U 12.00

2.5 oz. 2 1/2 in. HF250U 12.00

3 oz. 3 in. HF300U 12.00

3.5 oz. 3 1/2 in. HF350U 12.00

4 oz. 4 in. HF400U 12.00

4.5 oz. 4 1/2 in. HF450U 12.00

5 oz. 5 in. HF500U 12.00

5.5 oz. 5 1/2 in. HF550U 12.00

Built-up Uniflow Slide In (BU Style) All plumbing forward

2” Wide X 1” High


2.5 oz 2 1/2 in. GRW250BU 12.00

3 oz 3 in. GRW300BU 12.00

3.5 oz 3 1/2 in. GRW350BU 12.00

4 oz 4 in. GRW400BU 12.00

4.5 oz 4 1/2 in. GRW450BU 12.00

5 oz 5 in. GRW500BU 12.00

5.5 oz 5 1/2 in. GRW550BU 12.00

6 oz 6 in. GRW600BU 12.00

6.5 oz 6 1/2 in. GRW650BU 12.00

7 oz 7 in. GRW700BU 12.00

Profile Standard Vent (S Style) 2-3/16” Wide X 1-7/16” High


3 oz 2.25 in. GRW300S 11.00

3.5 oz 2.65 in. GRW350S 11.00

4 oz 3.05 in. GRW400S 11.00

4.75 oz 3.45 in. GRW475S 11.00

5.25 oz 3.90 in. GRW525S 11.00

Snub-Nose Uniflow (U Style) 2-1/4” Wide X 1-1/4” High

Designed for short nosed ships like a Flight Streak,

Ringmaster or Buster


2 oz 1.40 in. GRW200U 11.00

2.5 oz 1.875 in. GRW250U 11.00

3 oz 2.25 in. GRW300U 11.00

3.5 oz 2.65 in. GRW350U 11.00

4 oz 3.05 in. GRW400U 11.00

4.75 oz 3.45 in. GRW475U 11.00

2013 – Revised 11/13/2013


Built-up Uniflow Slide In (WU Style) 2” Wide X 1” High


3 oz 3 in. GRW300WU 12.00

3.5 oz 3 ½ in. GRW350WU 12.00

4 oz 4 in. GRW400WU 12.00

4.5 oz 4 ½ in. GRWG50WU 12.00

5 oz 5 in. GRW500WU 12.00

5.5 oz 5 ½ in. GRW550WU 12.00

6 oz 6 in. GRW600WU 12.00

6.5 oz 6 ½ in. GRW650WU 12.00

7 oz 7 in. GRW700WU 12.00

Old Time Stunt Uniflow 2” Wide X 1” High

Specially Designed for Upright Engines


2.5 oz 2 1/2 in. OTS250 12.00

3 oz 3 in. OTS300 12.00

3.5 oz 3 1/2 in. OTS350 12.00

4 oz 4 in. OTS400 12.00

Chicken Hopper Style (C Style)


2 oz 1.40 in. GRW200C 17.99

3.25 oz 2.25 in. GRW325C 17.99

3.75 oz 2.65 in. GRW375C 17.99

4.25 oz 3.05 in. GRW425C 17.99

5 1/8 oz 3.45 in. GRW5125C 17.99

5.75 oz 3.90 in. GRW575C 17.99

Balloon Tanks For 1/2A Description Capacity Part # Price

Balloon Tank for

1/ 2 A

1.75 oz BALL 5.95

Balloon Tank Kit -- BALLKIT 2.95

Tank Accessories Description Part # Price

Tank Vent Caps (6) GRWTVC 1.99

Fuselage Vent Tubes GRWFVT 4.95

2013 – Revised 11/13/2013


Handles and Lines

Control Line Handles Description Part # Price

“Renger” 1/2A Handle R12A 9.99

“Renger” .15 Handle R15A 11.99

1/2A Handle with Lines SH544 3.30

Expert Level w/Length and

Spacing Adjustments

HFPRO 34.95

Replacement Safety Thong THONG 1.99

Replacement Wooded Grip HFWOOD 11.99

Replacement Front Bar (includes

Cable)

HFBAR 20.99

Replacement Handle Cable HFCABLE 6.95

Handle Grip Tape HGTAPE 4.95

.016" Copper Wrapping Wire HF601 1.05

Line Wrapping Set - Wire +

Eyelets

HF602 1.99

Line Connectors Description Part # Price

Slide Style 15# 1/2A Clip (4) CONS 1.25

Slide Style 22# A-B Clip (4) CONM 1.50

Line Connector, Squeeze Style 80#

C-D Clip 4 pack

CLCON112 4.99

Line Connector, Squeeze Style

100# C-D Clip (4)

CLCON114 5.99

Line Reels Description Part # Price

4" Plastic Line Reel CLR 3.99

Stainless Steel Line Clips MLC .99

Eyelets & Crimp Sleeves for Lines Description Part # Price

Bag of 25 Line Eyelets HF600 2.99

Chrome Plated Brass Sleeves

for.012-.018 Wire (50)

HFSL052 5.49

Chrome Plated Brass Sleeves

for.018-.027 Wire (50)

HFSL071 7.99

Leadout Wire Sets Description Part # Price

1/2A Leadout Wire Kit .021 X 4' HF021-4 2.25

C-D Leadout Wire Kit .027 X 6' HF027-6 3.25

C-D Leadout Wire Kit .027 X 12' HF027-12 3.95

Adjustable Leadout Guide Wood LOG1 4.25

Twin Adjustable Leadout Guide LOG2 4.95

Adjustable Wing Tip Weight Box HFWTB 3.99

Stainless Steel Control Lines All control lines are not identical! Don't be fooled by lines that “fly smoother". If you reduce the diameter of the lines they

will "fly smoother". RSM Distribution guarantees that our line will measure at least the minimum necessary diameter

required by AMA rules!

Braided Control Lines on 4" Reel Description Part # Price

.008 Control Line 35' Long CL008X2-35 8.60











Bulk Line on Reel Description Part # Price

.015 Braided Line X 1,000 Feet CL015B 69.99

.018 Braided Line X 1,000 Feet CL018B 69.95

Twin Adjustable Leadout Guide LOG2 4.95

Adjustable Wing Tip Weight Box HFWTB 3.99

2013 – Revised 11/13/2013


Hardware

Aircraft Hex Nuts Size Description Part # Price

2-56 bag of 25 HF1 1.15

bag of 100 HF1A 3.50

4-40 bag of 25 HF2 1.15


6-32 bag of 25 HF3 1.15


8-32 bag of 25 HF4 1.15


T-Handle Socket Drive Wrench Fits socket size Part # Price

4-40 HF450 4.95

6-32 HF451 4.95

M2 HF460 4.95

M2.5 HF461 4.95

M3 HF462 4.95

Sheet Metal Screws Size Description Part # Price

#2 X 1/2 bag of 25 HF180 .99

bag of 100 HF180A 2.99

#4 X 3/8 bag of 25 HF188 .99

bag of 100 HF188A 2.99

#4 X 1/2 bag of 25 HF189 .99

bag of 100 HF189A 2.99

#4 X 3/4 bag of 25 HF190 .99

bag of 100 HF190A 2.99

#6 X 1/2 bag of 25 HF191 .99

bag of 100 HF191A 2.99

#6 X 3/4 bag of 25 HF192 .99

bag of 100 HF192A 2.99

#8 X 1/4 bag of 25 HF193 .99

bag of 100 HF193A 2.99

#8 X 1/2 bag of 25 HF194 .99

bag of 100 HF194A 2.99

#8 X 3/4 bag of 25 HF195 .99

bag of 100 HF195A 2.99

Heat-Treated Propeller Nuts

(2 pack)


1/4-28 HFPN1 1.99

5/16-24 HFPN2 1.99

M5-0.8 HFPN3 1.99

M6-1.0 HFPN4 1.99

M7-1.0 HFPN5 1.99

M8-1.25 HFPN6 1.99

Blind Nuts Size Description Part # Price

4-40 bag of 25 HF20 2.99

bag of 100 HF20A 8.99

6-32 bag of 25 HF21 3.35

bag of 100 HF21A 9.99

8-32 bag of 25 HF22 3.35

bag of 100 HF22A 9.99

10-32 bag of 25 HF23 3.35

bag of 100 HF23A 9.99

1/4-20 bag of 25 HF24 3.35

bag of 100 HF24A 9.99

Mounting Bolt Sets Round Head Bolts

With Nuts and Washers

Size Part # Price

4-40 X 1-1/4 HF127 1.10

6-32 X 1-1/4 HF128 1.10

Round Head Bolts

With Nuts and Washers

Size Part # Price

4-40 X 1-1/4 HF127 1.10

6-32 X 1-1/4 HF128 1.10

2013 – Revised 11/13/2013


Socket Head Bolts Size Description Part # Price

2-56 X 1/4 bag of 25 HF71 4.65

bag of 100 HF71A 13.99

2-56 X 3/8 bag of 25 HF72 4.65

bag of 100 HF72A 13.99

2-56 X 1/2 bag of 25 HF73 4.65

bag of 100 HF73A 13.99

4-40 X 1/4 bag of 25 HF74 2.35

bag of 100 HF74A 6.99

4-40 X 3/8 bag of 25 HF75 2.35

bag of 100 HF75A 6.99

4-40 X 1/2 bag of 25 HF76 2.35

bag of 100 HF76A 6.99

4-40 X 3/4 bag of 25 HF77 2.35

bag of 100 HF77A 6.99

4-40 X 1 bag of 25 HF78 4.65

bag of 100 HF78A 13.99

4-40 X 1-1/4 bag of 25 HF79 4.65

bag of 100 HF79A 13.99

Size Description Part # Price

4-40 X 1-1/2 bag of 25 HF80 4.65

bag of 100 HF80A 13.99

6-32 X 1/4 bag of 25 HF81 2.35

bag of 100 HF81A 6.99

6-32 X 1/2 bag of 25 HF82 2.35

bag of 100 HF82A 6.99

6-32 X 3/4 bag of 25 HF83 2.35

bag of 100 HF83A 6.99

6-32 X 1 bag of 25 HF84 2.35

bag of 100 HF84A 6.99

6-32 X 1-1/4 bag of 25 HF85 4.65

bag of 100 HF85A 13.99

6-32 X 1-1/2 bag of 25 HF86 4.65

bag of 100 HF86A 13.99

8-32 X 1-1/2 bag of 25 HF87 2.35

bag of 100 HF87A 6.99

Round Head Bolts complete with nuts


2-56 X 3/16 bag of 25 HF49 1.99

bag of 100 HF49A 6.99

2-56 X 3/8 bag of 25 HF50 1.99

bag of 100 HF50A 6.99

2-56 X 1/2 bag of 25 HF51 1.99

bag of 100 HF51A 6.99

2-56 X 3/4 bag of 25 HF52 1.99

bag of 100 HF52A 6.99

2-56 X 1 bag of 25 HF53 1.99

bag of 100 HF53A 6.99

4-40 X 1/4 bag of 25 HF54 1.99

bag of 100 HF54A 6.99

4-40 X 1/2 bag of 25 HF55 1.99

bag of 100 HF55A 6.99

4-40 X 3/4 bag of 25 HF56 1.99

bag of 100 HF56A 6.99


4-40 X 1 bag of 25 HF57 1.99

bag of 100 HF57A 6.99

4-40 X 1-1/4 bag of 25 HF58 1.99

bag of 100 HF58A 6.99

4-40 X 1-1/2 bag of 25 HF59 1.99

bag of 100 HF59A 6.99

6-32 X 1/2 bag of 25 HF60 1.99

bag of 100 HF60A 6.99

6-32 X 3/4 bag of 25 HF61 1.99

bag of 100 HF61A 6.99

6-32 X 1 bag of 25 HF62 1.99

bag of 100 HF62A 6.99

6-32 X 1-1/4 bag of 25 HF63 1.99

bag of 100 HF63A 6.99

6-32 X 1-1/2 bag of 25 HF64 1.99

bag of 100 HF64A 6.99

2013 – Revised 11/13/2013


Stainless Steel 10 per bag

Size Part # Price

4-40 Hex Nuts HFS2 1.99

4-40 X 1/4 Socket Cap Head HFS74 2.49





4-40 X 1 Socket Cap Head HFS79 2.49

4-40 X 1-1/4 Socket Cap Head HFS80 2.49

4-40 X 1/4 Flat Head Socket Cap HFS89 2.49





4-40 X 1 Flat Head Socket Cap HFS94 2.49

Washers Size Description Part # Price

# 2 Flat Washer bag of 25 HF30 .69

bag of 100 HF30A 1.99




bag of 100 HF32A 1.99


bag of 100 HF33A 1.99

# 2 Lock Washer bag of 25 HF40 .69

bag of 100 HF40A 1.99


bag of 100 HF41A 1.99


bag of 100 HF42A 1.99


bag of 100 HF43A 1.99

Metric Socket Cap Head

10 per bag

Size Part # Price

M3-0.5 X 6 Socket Cap Head HFM75 1.99








M3-0.5 X 6 Socket Cap Flat Head HFM89 1.99













Nylon Bolts bags of 10


6-32 X 1 Binder Head HF495 1.99

10-24 X 1-1/2 Binder Head HF496 1.99




1/4-20 X 1 Binder Head HF501 1.99

1/4-20 x 1-1/2 Binder Head HF502 1.99

1/4-20 x 2 Binder Head HF503 1.99

1/4-20 x 1 Flat Head HF510 2.50

1/4-20 x 1-1/2 Flat Head HF511 2.50

Nylon Flat Washers Size Description Part # Price

# 4 bag of 25 HF520 .79

bag of 100 HF520A 2.49

# 6 bag of 25 HF521 .79

bag of 100 HF521A 2.49

# 8 bag of 25 HF522 .79

bag of 100 HF522A 2.49

# 10 bag of 25 HF523 .79

bag of 100 HF523A 2.49

Nylon Lock Nuts Size Description Part # Price

4-40 bag of 25 HF11 1.99

bag of 100 HF11A 5.50

6-32 bag of 25 HF12 1.99

bag of 100 HF12A 5.50

8-32 bag of 25 HF13 1.99

bag of 100 HF13A 5.50

2013 – Revised 11/13/2013


Nylon Cable Ties

Color Size Description Part # Price

White 4"

20/Bag HF101-WHT 1.50

100/Bag HF101-WHT-A 3.99

8" 20/Bag HF111-WHT 1.99

100/Bag HF111-WHT-A 7.99

11" 20/Bag HF113-WHT 2.50

100/Bag HF113-WHT-A 10.99

15" 20/Bag HF115-WHT 3.99

100/Bag HF115-WHT-A 14.99

Black 4"

20/Bag HF101-BLK 1.50

100/Bag HF101-BLK-A 3.99

8" 20/Bag HF111-BLK 1.99

100/Bag HF111-BLK-A 7.99

11" 20/Bag HF113-BLK 2.50

100/Bag HF113-BLK-A 10.99

15" 20/Bag HF115-BLK 3.99

100/Bag HF115-BLK-A 14.99

Blue 4"

20/Bag HF101-BLU 1.50

100/Bag HF101-BLU-A 3.99

8" 20/Bag HF111-BLU 1.99

100/Bag HF111-BLU-A 7.99

11" 20/Bag HF113-BLU 2.50

100/Bag HF113-BLU-A 10.99

15" 20/Bag HF115-BLU 3.99

100/Bag HF115-BLU-A 14.99

Green 4"

20/Bag HF101-GRN 1.50

100/Bag HF101-GRN-A 3.99

8" 20/Bag HF111-GRN 1.99

100/Bag HF111-GRN-A 7.99

11" 20/Bag HF113-GRN 2.50

100/Bag HF113-GRN-A 10.99

15" 20/Bag HF115-GRN 3.99

100/Bag HF115-GRN-A 14.99

Red 4"

20/Bag HF101-RED 1.50

100/Bag HF101-RED-A 3.99

8" 20/Bag HF111-RED 1.99

100/Bag HF111-RED-A 7.99

11" 20/Bag HF113-RED 2.50

100/Bag HF113-RED-A 10.99

15" 20/Bag HF115-RED 3.99

100/Bag HF115-RED-A 14.99

Color Size Description Part # Price

Yellow 4"

20/Bag HF101-YEL 1.50

100/Bag HF101-YEL-A 3.99

8" 20/Bag HF111-YEL 1.99

100/Bag HF111-YEL-A 7.99

11" 20/Bag HF113-YEL 2.50

100/Bag HF113-YEL-A 10.99

15" 20/Bag HF115-YEL 3.99

100/Bag HF115-YEL-A 14.99

Orange 4”

20/Bag HF101-ORG 1.50

100/Bag HF101-ORG-A 3.99

8” 20/Bag HF111-ORG 1.99

100/Bag HF111-ORG-A 7.99

11” 20/Bag HF113-ORG 2.50

100/Bag HF113-ORG-A 10.99

15” 20/Bag HF115-ORG 3.99

100/Bag HF115-ORG-A 14.99

Purple 4”

20/Bag HF101-PUR 1.50

100/Bag HF101-PUR-A 3.99

8” 20/Bag HF111-PUR 1.99

100/Bag HF111-PUR-A 7.99

11" 20/Bag HF113-PUR 2.50

100/Bag HF113-PUR-A 10.99

15” 20/Bag HF115-PUR 3.99

100/Bag HF115-PUR-A 14.99

Fluor.

Green 4”

20/Bag HF101-FGN 1.50

100/Bag HF101-FGN-A 3.99

8” 20/Bag HF111-FGN 1.99

100/Bag HF111-FGN-A 7.99

11” 20/Bag HF113-FGN 2.50

100/Bag HF113-FGN-A 10.99

15” 20/Bag HF115-FGN 3.99

100/Bag HF115-FGN-A 14.99

Fluor.

Yellow 4”

20/Bag HF101-FYL 1.50

100/Bag HF101-FYL-A 3.99

8” 20/Bag HF111-FYL 1.99

100/Bag HF111-FYL-A 7.99

11” 20/Bag HF113-FYL 2.50

100/Bag HF113-FYL-A 10.99

15” 20/Bag HF115-FYL 3.99

100/Bag HF115-FYL-A 14.99

RSM Catalog

Documents

Transcript of RSM Catalog