RPL Staubli D100e
-
Upload
juanverengeur -
Category
Documents
-
view
320 -
download
2
Transcript of RPL Staubli D100e
-
8/13/2019 RPL Staubli D100e
1/16
-
8/13/2019 RPL Staubli D100e
2/16
-
8/13/2019 RPL Staubli D100e
3/16
3
...performance right down the line
3 diameters to support your productionThe RPL range with its clear bore combines excellentow with a compact design.RPL connectors come in three sizes and cover all theow volumes required for mould temperature control.
Free circulation of uidsThanks to the clear bore design the risk of scaleformation is eliminated and the circulation owprotected.
Strong enough for any test
Socket and plug marking
RPL 06
RPL 08
RPL 12
R E G I
S T
E R E D C O
MM U N I
T Y D
E S I G N
P A
T E N T E
D
US 7 503 592and other countries
-
8/13/2019 RPL Staubli D100e
4/16
4
Simplicity and efficiency at all levels...
Ease of connection and disconnectionThanks to the knurled locking ring making it easier to grip the plug,connection and disconnection can be done with one hand, and in recordtime.In a compact RPL connection installation a shoulder (RPL 08 andRPL 12 mm) or groove (RPL 06 mm) on the locking ring enables a tool to
be used in complete safety.
Simplied maintenanceSeal replacement is quick and easy.It is done in record time and has noeffect on your productivity.
ush tting - easy mould storage- no risk of damage to the
sockets.
slightly proud tting.
For new moulds:
For existing moulds:
Possibility of using a tool
Knurled locking ring
-
8/13/2019 RPL Staubli D100e
5/16
5
...and extended life
Performance enhancing extensionsMonobloc sturdy and rigid nickel plated brass socketextensions t easily onto the moulds.They are available in various lengths to suit all yourinstallations, and can be adjusted to match any layout.
Bridge pieces to rationalise yourassembliesReduction in the number of ow meters, easeof maintenance, reduced size, and exibility ofassembly; with their functionality our bridgepieces can enhance your performance.
Flexibility of assembly:They adjust for misalignment.
More than 300 products to cover all your needs.
-
8/13/2019 RPL Staubli D100e
6/16
6
Technical characteristics
RPL 06 RPL 08 RPL 12
Bore diameter (mm) 6 7.5 12
Max. working pressure (bar) 10 10 10
Working temperatures (C) with a Nitrile seal NBR -15 to +90C* -15 to +90C* -15 to +90C*
*For other conditions please contact us
Chart ow / pressure loss for water
0.01
0.02
0.03
0.05
0.1
0.2
0.5
1
1 2 3 5 10 20 30 50 100
V = 5 m/s
C v =
1 . 8
7
C v
= 2 . 6 8
C v
= 7 . 9 2
Flow (l/mn)
P r e s s u r e
l o s s
( b a r )
RPL 12RPL 08RPL 06
Test conditionsDirection of ow: socket plug
Construction
- Socket in nickel plated brass, with PTFE pre-applied(straight male threaded sockets)
- Plug and extension in nickel plated brass- Seal in nitrile (NBR) and other seals on request- Spring and balls in 18/8 stainless steel- RPL 06: 6 balls,
RPL 08 and 12: 8 balls.
Sockets and plugs
-
8/13/2019 RPL Staubli D100e
7/16
7
Bridge pieces
- Use with RPL 08 non threaded plug- Tube supply length: 1 metre
Construction- Calibrated work hardened brass tube.
Extended sockets
Threaded nish (RPL 08)3 lengths available in G 1/84 lengths available in G 1/4
Smooth nish- RPL 06: 1 length- RPL 08: 4 lengths- RPL 12: 3 lengths
ConstructionThick wall monobloc construction forhigh strength and stiffness.
-
8/13/2019 RPL Staubli D100e
8/16
C
A
D
B
E G
F
8
Straight socket male thread, PTFE pre-applied
Model FthreadDimensions (mm) Part-numbers
without coloured ringA B C D E G Allen key
RPL 06
R 1/8 17 18.5 7.5 14 28.5 1.5 6 RPL 06.1150
NPT 1/8 17 18.5 7 14 28.5 1.5 6 RPL 06.1250
R 1/4 17 15.5 11 14 28.5 1.5 6 RPL 06.1151
NPT 1/4 17 - 11 - 29.5 1.5 6 RPL 06.1251
RPL 08
R 1/8 21 22 8 17.5 32 1.5 6 RPL 08.1150
NPT 1/8 21 22 7 17.5 32 1.5 1/4 RPL 08.1250
R 1/4 21 21 10 17.5 33 1.5 8 RPL 08.1151
NPT 1/4 21 21 11 17.5 33 1.5 5/16 RPL 08.1251
R 3/8 21 11 11 - 24 1.5 8 RPL 08.1152
NPT 3/8 21 11 11 - 24 1.5 5/16 RPL 08.1252
RPL 12
R 3/8 32 28 11 25 41 2 10 RPL 12.1152
NPT 3/8 32 28 11 25 41 2 3/8 RPL 12.1252
R 1/2 32 28 14 25 44 2 14 RPL 12.1153
NPT 1/2 32 28 14 25 44 2 9/16 RPL 12.1253
R 3/4 32 13 16.5 - 32 2 14 RPL 12.1154NPT 3/4 32 13 14 - 32 2 9/16 RPL 12.1254
Proud socket Flush socket
Model Tapping A E J Min. F Min. G I Allen key Recommendedtightening torque (N m)
RPL 06
G 1/8 17 20 10 18.5 20.5 29.5 6 15
NPT 1/8 17 22 10 18.5 22.5 31.5 1/4 15
G 1/4 17 18 13 18.5 18.5 30.5 6 30
NPT 1/4 17 20 13.5 18.5 20.5 33 1/4 30
RPL 08
G 1/8 21 23 10 22.5 24 33 6 15
NPT 1/8 21 25.5 10 22.5 25.5 35 1/4 15
G 1/4 21 22 12 22.5 23 34 8 30
NPT 1/4 21 24 12 22.5 23.5 35.5 5/16 30
G 3/8 21 12 13 22.5 13 25 8 30
NPT 3/8 21 14 13 22.5 14 27 5/16 30
RPL 12
G 3/8 32 29 13 33.5 30 42 10 50
NPT 3/8 32 33 13 33.5 33 46 3/8 50
G 1/2 32 30 15 33.5 31 45 14 50
NPT 1/2 32 35 15 33.5 34.5 51 9/16 50G 3/4 32 15 18 33.5 20 36 14 50
NPT 3/4 32 17.5 18 33.5 17.5 36.5 9/16 50
J Minimum
E
A
I
G
F M i n i m u m
R 1/8* = G 1/8 co.
Chamfer the corners of the mould 0.3 x 0.3
Installation dimensions for the socket in the mould
With blue ring add /KB to the part number With red ring add /KR to the part number
-
8/13/2019 RPL Staubli D100e
9/16
-
8/13/2019 RPL Staubli D100e
10/16
-
8/13/2019 RPL Staubli D100e
11/16
11
A
i
C
B
A
i
B
D
C
A
i
B
D
C
A
C
B
j
i
Straight plug for hose
Plug 90 for hose
Plug 135 for hose
Straight plug for self-locking hose
ModelDimensions (mm) Part-numbers
with a black ringi A B C
RPL 06 8 17 55 23 RPL 06.6808
RPL 08
6 20 66 28 RPL 08.6806
8 20 66 28 RPL 08.6808
10 20 66 28 RPL 08.6810
12.5 20 66 28 RPL 08.6812
RPL 12 13 28 78 33 RPL 12.6813
16 28 78 33 RPL 12.6816
ModelDimensions (mm) Part-numbers
with a black ringi A B C D
RPL 08
6 20 48.5 28 23.5 RPL 08.6806/RE 8 20 48.5 23 23.5 RPL 08.6808/RE
10 20 48.5 23 10 RPL 08.6810/RE
12.5 20 48.5 28 10 RPL 08.6812/RE
RPL 12 13 28 75.5 33 27 RPL 12.6813/RE
16 28 75.5 33 27 RPL 12.6816/RE
ModelDimensions (mm) Part-numbers
with a black ringi A B C D
RPL 08
6 20 43 28 21 RPL 08.6806/RO
8 20 43 23 21 RPL 08.6808/RO
10 20 43 23 21 RPL 08.6810/RO
12.5 20 43 28 21 RPL 08.6812/RO
RPL 12 13 28 72 33 24 RPL 12.6813/RO
16 28 72 33 24 RPL 12.6816/RO
ModelDimensions (mm) Part-numbers
with a black ringi A B C j
RPL 083/8 20 62 24.5 19.5 RPL 08.6810/CN
1/2 20 69 29 23.5 RPL 08.6813/CN
RPL 121/2 28 74 29 23.5 RPL 12.6813/CN
5/8 28 81.5 36.5 27 RPL 12.6816/CN
With blue ring add /KB to the part number With red ring add /KR to the part number
With blue ring add /KB to the part number With red ring add /KR to the part number
With blue ring add /KB to the part number With red ring add /KR to the part number
With blue ring add /KB to the part number With red ring add /KR to the part number
-
8/13/2019 RPL Staubli D100e
12/16
12
A
B
i
j
D
C
A
B
i j
D
C
A
B
F
A
B
C
F
A
B
D
C
F
Plug 90 for self-locking hose
Plug 135 for self-locking hose
Straight plug female thread
Plug 90 female thread
Plug 135 female thread
ModelDimensions (mm) Part-numbers
with a black ringi A B C D j
RPL 083/8 20 48.5 24.5 23.5 19.5 RPL 08.6810/CN/RE
1/2 20 48.5 29 25.5 23.5 RPL 08.6813/CN/RE
RPL 121/2 28 75.5 29 30.5 23.5 RPL 12.6813/CN/RE
5/8 28 75.5 36.5 30 27 RPL 12.6816/CN/RE
ModelDimensions (mm) Part-numbers
with a black ringi A B C D j
RPL 083/8 20 43 24.5 21 19.5 RPL 08.6810/CN/RO
1/2 20 43 29 23 23.5 RPL 08.6813/CN/RO
RPL 12
1/2 28 72 29 27.5 23.5 RPL 12.6813/CN/RO
5/8 28 72 36.5 27 27 RPL 12.6816/CN/RO
ModelDimensions (mm) Part-numbers
with a black ringF A B
RPL 08G 1/4 20 48.5 RPL 08.6101
NPT 1/4 20 48.5 RPL 08.6201
RPL 12G 1/2 28 61 RPL 12.6103
NPT 1/2 28 63 RPL 12.6203
Model FthreadDimensions (mm) Part-numbers
with a black ringA B C E
RPL 08G 1/4 20 48.5 16.5 31 RPL 08.6101/RE
NPT 1/4 20 60.5 15 38.9 RPL 08.6201/RE
RPL12 G 3/8 28 75.5 20 52.9 RPL 12.6102/RENPT 3/8 28 75.5 20 52.9 RPL 12.6202/RE
Model FthreadDimensions (mm) Part-numbers
with a black ringA B C D
RPL 08G 1/4 20 43 14 27.5 RPL 08.6101/RO
NPT 1/4 20 57.5 14.5 28.5 RPL 08.6201/RO
RPL12G 3/8 28 72 17 33 RPL 12.6102/RO
NPT 3/8 28 72 17 33 RPL 12.6202/RO
With blue ring add /KB to the part number With red ring add /KR to the part number
With blue ring add /KB to the part number With red ring add /KR to the part number
With blue ring add /KB to the part number With red ring add /KR to the part number
With blue ring add /KB to the part number With red ring add /KR to the part number
With blue ring add /KB to the part number With red ring add /KR to the part number
-
8/13/2019 RPL Staubli D100e
13/16
13
B
A
C
RPL 08 Bridge
ModelDimensions (mm) Part-numbers
with a black ringA B C
90 plugRPL 08 20 59 17
RPL 08.6000/RE
Tube Tube, supply length = 1 m R 113 910 00
Max. admissible offset allowed = Nominal distance between centres x 0.02
Machining of the endsTube preparation
Tube lengthL = (Nominal distance between centres -10) 0.5
E.g.: if the nominal between centres distanceis 100 mmL = (100 - 10) 0.5 = 90 0.5
Nominal distance between centres 0.5(min. between centres = 35)
L 0.5
Simultaneous connectionand disconnection of the 2 plugs
RPL 08.6000/RE plug
RPL 08 socket
17
4 2
. 6
3 7
. 7
Max. offset allowed
Ra 1.6
12 Min.
15 Min.
R 5 R 0 .5
1 5
Area Ra 1.6
Length 11 0.1
8 M a x .
1 1
0 . 1
9
. 9
-
8/13/2019 RPL Staubli D100e
14/16
-
8/13/2019 RPL Staubli D100e
15/16
15
Installation of the sockets extenders into the mould
L2
G
F M i n i
C
F *
30
One piece socket extender
Mould
Cavity
Ensure cleanliness of your circuit Part-number
Packaging: box of 100 dust caps
Construction: yellow polyethyleneRPL 08.8500/100
Packaging: sachets of 10
We reserve the right to make changes to our products without advanced warning.
Packaging: sachets of 25 red or blue collars with the same number
How to build your part-number
R 213 8 collar Collar colour Collar number
Commonpart
R 213 8
13 Hose outside 13 to 17 mm Blue Collar 7
Red Collar 3
from 0 to 9
17 Hose outside 17 to 24 mm
24 Hose outside 24 to 28 mm
E.g.: R 213 8 13 7 0 R 213 813 70 (Blue collar 13 engraved - 0)
R 213 8 24 3 5 R 213 824 35 (Red collar 24 engraved - 5)
Replacement Nitrile seal for plug
Colour identication collar for hose
Protective dust cap for socket
Model Part-numbers
RPL 06 R 603 507 11
RPL 08 R 600 007 11
RPL 12 R 600 011 10
-
8/13/2019 RPL Staubli D100e
16/16
Stubli units Connectors distributors
International sales coordinationStubli Faverges - BP 70 - F - 74210 FavergesTel.: +33 (0) 4 50 65 67 97 - Fax: +33 (0) 4 50 65 60 69e mail: [email protected] is a trademark of Stubli International AG, registered in Switzerland and other countries.
www.staubli.com
Belgium Tel.: +32 (0) 56 36 40 [email protected]
Czech Republic,Slovakia, HungaryTel.: +420 466 616 [email protected]
FranceTel.: +33 (0)1 69 93 25 [email protected]
Germany, AustriaTel.: +49 (0) 921/[email protected]
Italy Tel.: +39 (0) 362/[email protected]
PolandTel.: +48 42 636 85 [email protected]
PortugalTel.: +351 22 978 39 56/[email protected]
RomaniaTel.: [email protected]
RussiaTel.: + 7 812 [email protected]
SpainTel.: +34 937 205 [email protected]
SwitzerlandTel.: +41 (0) 43/244 22 [email protected]
United KingdomTel.: +44 (0) 1952 671 [email protected]
BrazilTel.: +55 (0) 11 2348 [email protected]
North America (USA, Canada, Mexico)Tel.: +1 864/[email protected]
ChinaTel.: +86 571 [email protected]
Hong KongTel.: +852-2366 [email protected]
JapanTel.: +81 6 6889 [email protected]
SingaporeTel.: +65 / 6266 [email protected]
South KoreaTel.: +82 53 753 [email protected]
TaiwanTel.: +886-2-2568 [email protected]
TurkeyTel.: +90 212/472 13 [email protected]
Stubli, 13/12/2011
D 1
0 0
. 0 8 e
C