BivaNarrow web rotogravure printing linePaper and film

The easy way to reach quality for flexible packaging.Cantilever type design, side accessSleeve type impression rollersShell type engraved cylindersLight weight inking parts

MAIN SPECIFICATIONS• Web width: 680 - 820 mm• Print repeat: 300 to 800 mm• Adapted dryers• Printing speed 400-600 m/min

❱ Web width: 680 - 820 mm❱ Production speed: 400-600 m/min

e-AtenaPaper and board

The reference in the tobacco packaging for paper and boardInnovations, high productivity and quality printingA large range of unwinders, special processes (hot foil and hologram stamping, UV curing, …) and finishing units to complete the gravure press (rewinder, sheeter, rotary die cutter, label cutter…) MAIN SPECIFICATIONS• Web width: 660 - 850 mm• Print repeat: 360 to 760 mm • Production speed: up to 250 m/min

EQUIPMENT & OPTIONS

• e- RDC : Rotary die cutter (cut crease emboss unit)

• LC : Label cutter• ROTOFOIL: Foil stamping machine• Stackers, Rejector, Sheeter SH, Rewinder

RW, Rotary Creaser RC, Rotary Puncher RP...

❱ Web width: 660-850 mm❱ Production speed: 250 m/min❱ In line Rotary Die Cutter e-RDC

EQUIPMENT & OPTIONS

• Preheating device• Corona treater• Adapted dryers • Turning bar• Electrostatic assistance• Viscosity control• Video inspection system

rotogravure printing presses

Laminastar 4Solventless lamination

Laminawax 2Wax, hotmelt coating, wax lamination

Laminastar combi compactMultiprocess coating and laminating line

Laminastar combiMultiprocess coating and laminating line

40 years of experience in solvent free lamination with two versions : - Laminastar 4 compact construction with single shaftless unwind and rewind stations - Laminastar 2 with non-stop unwinder and rewinder for high productivity

MAIN SPECIFICATIONS• Web width: 870 – 1070 – 1370 mm• Coating width: 850 – 1050 – 1350 mm• Production speed up to 400 m/min

A productive multi-purpose compact laminator to meet the requirements of converters who have to use several lamination processes.

MAIN SPECIFICATIONS• Web width: 850 - 1050 - 1350 mm• 6 m long drying tunnel• Production speed: 400 m/min depending on the process• Unwinder and rewinder reel diameter: 1000 mm

Laminawax 2 a must for wax and hotmelt coatingsHigh technology and sturdy construction for intensive use

MAIN SPECIFICATIONS• Web width: 800 – 1300 mm• Mechanical speed: 350 m/min• production speed up to 300 m/min• 3 cooling cylinders• Motioned through 4 Servo motors• Multiple web leads to carry out all applications.

A multi-purpose laminator to meet converters expectations for various and intensive use.

MAIN SPECIFICATIONS• Web width: 850 mm up to 1550 mm• 6 m to 12 m long modular drying tunnel• Possibility of in-line triplex lamination• Production speed: up to 600 m/min depening on process and dryer length• Unwinder and rewinder reel diameter: 1000 or 1300 mm

coaters and laminators

ServalCompact and cantilever

Panthere 4Center rewinder - Versatility and high performances

Leopard lmaCenter rewinder - Single turret rewinder

The SERVAL is compact slitter-rewinder with two rewinding shafts designed for narrow web gravure, flexo or offset printers. It is equipped with three AC motors and electronic web tension control. Its cantilever construction provides very good access for reel loading and unloading.

MAIN SPECIFICATIONS• web width: 680 – 820 mm• Unwind diameter: 800 mm• Minimum slit: 20 mm• Rewind diameter: 2 x 610 mm• Production speed: up to 500 m/min

The TIGRE is an automatic double turret slitter rewinder.It is the high productivity slitter rewinder with 25 seconds stops between two cycles. This slitter rewinder is available with numerous options for the unwinder, the slitting section, the rewinding and the unloading. Several unloading systems are available for small or large rolls, light or heavy ones.

MAIN SPECIFICATIONS• Web width: 800 up to 1600 mm• Unwind diameters: 1000 – 1300 – 1500 – 1800 mm• Minimum slit: 20 mm• Rewind diameter: 2 x 600 and 2 x 800 mm• Production speed: 600 – 800 m/min• Downtime between two cycles 25 seconds

The PANTHERE is a well known slitter-rewinder to many converters all over the world. It is highly appreciated for its rewinding capacity of diameter 800 mm, its easy adjustment and the quality of its production. The machine’s performance level and quality are widely recognised, along with its high reliability.

MAIN SPECIFICATIONS• Web width: 800 up to 1600 mm• Unwind diameters: 1000 – 1300 – 1500 – 1800 mm• Minimum slit: 20 mm• Rewind diameters: 2 x 800 or 2 x 1000 mm• Production speed: 600 – 800 m/min

The LEOPARD LMA is an automatic single turret slitter rewinder. It enables high productivity for non-stretchable and regular thickness substrates such as PET, OPP, foils, non-woven and laminates.

MAIN SPECIFICATIONS• Web width: 800 up to 1600 mm• Unwind diameters: 1000 – 1300 – 1500 – 1800 mm• Minimum slit: 50 mm• Rewind diameter: 700 or 1000 mm• Production speed: 600 m/min• Downtime less than 30 seconds

TigreCenter rewinder - Double turret rewinder

slitter rewinders

The DCM SLEEVE is the market reference with more than 500 machines worldwide.The machine is available in two web widths and five versions to meet productivity and budget needs. The modular concept enables later upgrades.

MAIN SPECIFICATIONS• Web width: 610 - 810 mm• Unwind diameters: 600 – 800 mm, single, double or non-stop stations• Lay flat sleeve widths: 15 up to 300 or 400 mm• Rewind diameter: 600 mm, single or non-stop stations• Production speed: 500 m/min• Adjustable forming plates• Solvent flow linked to the machine speed

The SLEEVECUT is a finishing machine primarily dedicated to shrink sleeve labels. The machine enables to:- Sheet sleeves- Perforate (registered cross and “T”

perforation) and sheet sleeves- Perforate and rewind (with optional

rewinder) sleeves- Sheet paper labels- Sheet PSL on liner.

MAIN SPECIFICATIONS• Web or sleeve width: 400 mm • Unwind diameter: 600 mm • Cut format: 20 up to 400 mm• Max speed: 400 c/min or 40 m/min

MAIN SPECIFICATIONS• Web width: 400 mm (16 inches)• Reels diameter: 610 mm (24 inches)• Control speed up to: 400 m/min• Cantilever construction• Automatic edge guide with

integrated oscillation operating in both ways

• Automatic re-reeling cycle• Automatic stop at defective area

shrink sleeve converting machines

Sleeve non-stopSleeve forming with non-stop unwinder and non-stop rewinder

Sleevecut 4Sleeve and label cutter

Babycat 4Sleeve inspectionand doctoring

Sleeve autoSleeve forming with non-stop rewinder

The must in quality control for sleeve and regular rolls:- Web width accuracy- Edge alignment- Tension control- Print quality- Print orientation- Core change- Roll split

SleeveSleeve forming

Tél.

: 01 3

4 89

30

54 -

Impr

imé

en F

ranc

e 05

/201

6