ROTO Cleanwater - Water tanks for burial | Рото-БГ чиста вода - Резервоари...

water

, ISO 9001

Rainwater tanks

Drinking water tanks

Rainwater equipment

2

Benefits of using rainwater tanks 1. ROTO rainwater tanks are distinguished by requiring sim-

ple and cost efficient INSTALLATION, maintenance and cleaning.

2. The use of these tanks will reduce the use of water from thewater distribution system and consequently SAVE costs inutility services up to €50 per month.

3. By collecting rainwater you can contribute to the PROTEC-TION OF THE ENVIRONMENT as the use of drinking wateris reduced in this way. It also improves one’s water sup-ply strategy and reduces one’s dependence on the waterdistribution system. The tanks are designed mostly for do-mestic use in households that do not have their own waterdistribution connection.

4. WATER SUPPLY – enables own water supply and helps withwatering gardens in dry periods when it is prohibited touse the water distribution system for such purposes.

5. SOFT WATER – rainwater is soft water, low in the calciumwhich causes limescale, and therefore very suitablefor washing textiles.

6. RAINWATER IS BETTER FOR GARDEN WATERING – Rainwa-ter is rich in nutrients and does not contain chlorine, whichmeans it is more suitable for watering flowers and plantsthan regular watering from the distribution system.

Save up to 65 litres of valuable drinking water per dayAs with many other things today, the use of water is affected by measures tailored to care for the environment and reduce costs.Over the years, the use of water has constantly been on the increase. At the moment, the average daily water consumption is 130 litres per person, and that is mostly highly valuable drinking water! Only 2-3% of drinking water is used for cooking or drinking.When taking a bath, for instance, one uses three times the quantity of hot water when taking a shower.

98% of our water requirements need not be covered by drinking waterSlovenia is abundant in high-quality drinking water. However, in 98% of cases, our requirements could be covered by non-drinking water (e.g. toilet flushing, washing machines, watering gardens and green surfaces, car washing, etc.). In a single day, one person could save up to 65 litres of valuable drinking water used for their water requirements just by replacing it with rainwater.

The ROTO Group comprises 10 companies with manufacturing facilities located in four European countries. The company is in private ownership and has been active in the domestic market as well as foreign markets for over 35 years as a successful manufacturer of plastic material products with the reputation of a reliable business partner.

The production of over 4,000 products with a volume capacity of up to 25m3 and the annual processing of over 3 million ki-los of polymers make ROTO one of the leading European com-panies using the rotomoulding manufacturing technology. Companies in the Group have recorded a 20% annual growth in revenues, which is the result of constant product develop-ment, investments in the update of manufacturing capacities, and good sales results recorded in all continents of the world.Through our own product development department and manufacture, we keep expanding our offering, and develop-ing new products every year. On average, we generate two new products every week.

The Roto Group’s competitive advantages are based on differ-entiation and flexibility, innovation brought to the marketing strategy, and good technological support offered to custom-ers. We fill in the market gap occurring when a product is, at its stage of life cycle development, translated into mass produc-tion. Through functional design we increase the added value of our products and we also increase the quality of manufac-ture, offer sales services, fit plastic products with components that offer an integral solution to the problems tackled by our customers, and use intelligent materials and modern technol-ogies in the process of manufacture.

Water well - decorative extension

code dimensions (w x h)

6131 800 x 8003830010987216

Water tank - 1000 L, free-standing

code dimensions (w x h)

6295 1150 x 650 x 16003830050770618

360 L code dimensions (w x h)

6243 800 x 10703830010987209


6245 420 x 5403830010982457


6246 550 x 7403830010982464


6247 700 x 8603830010982471


6320 750 x 16003830050772056

Rainwater tanks (50 L to 1,000 L)

3

Water collection requires:1. Water collection surface – a roof or natural well.2. Collecting pipes (rain gutter) – rainwater is supplied from

the roof through rain gutters and to the collecting pipeconnected to the tank. The collecting pipe should be bigenough to allow the collected water to run to the sand trapand the filter.

3. A sand trap – to catch fine gravel, leaves and sand.4. A supply pipe leading from the sand trap to the water tank5. A filter – this dictates cost efficient maintenance, allows

for a simple cleaning process with no side effects. Requiresconstant and intense maintenance to avoid great water loss.All water flowing from the roof to the tank should be filtered.No additional filtering is required after that.

6. A polyethylene tank – The tank can be fitted with a finefilter, a connection, spill-over system, vacuuming system and, ifrequired, connection pipes that can be used on multiple tanks.

Did you know?Rainwater can be used for all household requirements except as drinking water or in food preparation. The above figures show that a household will normally use only 2% of drinking water for actual drinking or cooking, which means rainwater can be used for all other purposes. Rainwater can be used for gardening, laundry washing, dish washing, car washing, as toilet water, etc.

The average daily water consumption is 130 litres per person

Baths / showers 45 litres

Loundry washing14 litres

Toiletwater

40 litres

Gardening 10 litres

Other cleaning 8 litres

Cooking / drinking 3 litres

Dish washing 7 litres

Car washing 3 litres

How do we determine the size of the water tank?Gardening: 2,000 L or 3,000 L

Gardening, car washing and toilet water: 5,000 L

Gardening, car washing, toilet water and washing machine: 8,000 L

Gardening, car washing, toilet water, washing machine and dishwasher: 12,000 L

Gardening, car washing, toilet water, washing machine, dishwasher, showers: 20,000 L


6703 2310 x 12503830050771165


6249 2310 x 16103830010982495


6701 2310 x 23303830050771141


6700 2310 x 30203830050771134

Code Volume Length Width Heightmin

Heightmax

6703 3500 L 2310 2310 1250 1450

6249 5000 L 2310 2310 1610 1810

6701 7500 L 2310 2310 2330 2530

6700 10000 L 2310 2310 3020 3220

L

Š

H m

inH m

ax

4

Vertical tanks – capacity from 3,500 L to 10,000 L

About rainwater tanks

• The average daily water consumption is 130 litres per person.• At least 50% of the daily quantity used in households could

be replaced by rainwater. This way, a 4-member householdcould save 95,000 litres of drinking water per year.

• The tanks are made of polyethylene material, which is suit-able for storing drinking water.

• The thickness of the tank wall is from 6 to 12 mm. Owing toexcellent statics characteristics and wall thickness, the tank isresistant to the outdoor wear and tear caused by soil pressureand diverse weather conditions, and has a very long life cycle.

• When the water tank is used on grounds with high levels ofgroundwater it should be fitted with steel clamps which arethen anchored to a concrete surface.

• According to the Maribor Institute of Public Health, the tankmaterial is suitable for storing drinking water or edibles.

• The tanks are made of original (non-recycled) material. A pol-yethylene tank can be fully recycled.

• A telescopic extension allows simple access to the filter andtank interior. Its adjustability allows adaptation of the tank’sheight according to the trench depth.

• The tank is closed with a plastic cover. If the tank is placedunder the ground, it should be sealed with a cover that canhold a point source pressure of up to 600 kg.

Best Construc-tion Industry Achievements Award – the 12,000 L polyethylene tank.

500 L code dimensions (l x w x h)

6225 1090 x 860 x 11703830010981863


6272 1987 x 1800 x 20503830010989333


6238 1600 x 1060 x 1460 3830010985816


6273 2480 x 1800 x 20503830010981313


6254 2680 x 2310 x 23503830010987063


6250 3760 x 2310 x 23503830010981849


6543 1960 x 1260 x 17103830010982068


6274 2880 x 1800 x 20503830010981429


Heightmax

6225 500 L 1085 860 1170 -

6238 1000 L 1600 1060 1460 -

6543 2000 L 1960 1260 1710 -

6272 3500 L 1987 1800 2050 2500

6273 5000 L 2480 1800 2050 2500

6274 6000 L 2880 1800 2050 2500

6254 8000 L 2680 2310 2350 2830

6250 12000 L 3760 2310 2350 2830L

WH m

inH m

ax

5

Tanks in the capacity of 500 L to 12,000 L – for entrenchment into the ground

40000 Lcode dimensions (l x w x h)

6237 11320 x 2310 x 23503830043917198


6242 13840 x 2310 x 23503830043917204


6257 6280 x 2310 x 23503830010989098


6235 8800 x 2310 x 23503830043917181


Heightmax

6257 20000 L 6280 2310 2350 2830

6235 30000 L 8800 2310 2350 2830

6237 40000 L 11320 2310 2350 2830

6242 50000 L 13840 2310 2350 2830

L

H m

axH

min

W

6

Tanks in the capacity of 12,000 L to 50,000 L – for entrenchment into the ground

7

ApplicationThe fully automated system makes sure you use rainwater in the house and gar-den, as toilet water, for the dishwasher and washing machine, for car washing, etc.

OperationThis is a pre-prepared and built-in pump system ready to be connected to the building. A magnetic valve alternates the water source from the rainwater tank to the water distribution system if necessary (e.g. when the tank runs out of water), always giving priority to the tank water. The system is upgraded with a provisional tank used for the water distribution sys-tem as the latter is prohibited from being directly burdened with pressure pumps. The pump is cooled by means of cold wa-ter, which cannot be heard in other rooms.

Household rainwater use systems

HOUSEHOLD SET

Components:1. Household pump set (3 versions):• Grundfos (code 9137) - flow: 3 m3/h; max. pressure level: 15 m,

max. service pressure: 7.5 bar; input power: 660 W• DAB Active - Switch (code 9138) - flow: 4.8 m3 / h;

max. pressure level: 42.2 m, max. service pressure: 6 bar; input power: 880 W

• DAB - Aquaprof Top (code 9139) -flow: 4.8 m3 / h max. pressure level: 57.7 m, max. service pressure: 6 bar; input power: 1200 W

2. Provisional tank (used for system security purposes, so the water dis-tribution network is not burdened).

3. A float switch fitted with a15-metre cable.

4. A 15-metre vacuuming tubewith a float bleed.

5. A stainless filter and non-return valve.

6. Mixing valve.

Pressure line

Connection for the water distribution system

Vacuuming line

2

2

1

1

3

8

ApplicationThe garden set comprises a high-quality dip pump fitted with a pressure switch (water is under pressure as the tap is opened/user is connected). It is suitable for gardening purposes, car washing and basic domestic application in holiday homes.

OperationThe pump constantly carries current and is ready for use. The user only needs to open a tap.

Components:1. A small garden shaft to which the watering pipe is connected.2. Dip pump: DAB Divertion 1000, fitted with a pressure switch

(max. flow: 5.7 m3/h; max. pumping level: 36 m; input power: 900 W; weight: 11 kg, 7-metre electric cable).

3. Pressure pipe placed between the pump and the shaft.

Rainwater use systems for gardening

GARDEN SET

code dimensions (w x h) ean code

6592 Ø 400 x 1000 3830010989548

code dimensions (w x h) ean code

6635 Ø 400 x 1000 38300109875136595 Ø 600 x 1000 3830043917570

code dimensions

1280302 Ø 501280304 Ø 1101280305 Ø 1251280303 Ø 160

38300109895793830010989586

3830043917549

383001098959321

4

3

5

• It cleans water before it flows into the tank. • A stainless grid is inserted in the plastic

shaft to extract leaves and twigs from water before it flows into the tank.

• The filter is closed with a plastic cover.

• It cleans the water of sand and dust collected from the roof before it flows into the tank.

• A telescopic extension allows adjustment of height according to excavation depth.

• Linking element between the rain gutter and inflow pipes leading to the tank.

9

Rainwater tank accessories

Components: 1. Plastic inflow/outflow tube – Ø 110 m2. Self-cleaning filter3. Spill-over sink4. Slow inflow5. Installation into the tank

Shaft filter

Seals for smooth-surface PVC/PP pipes

Water level meter (code 6556)

Additional tank extension (code 6357), Ø 600 x 600

Cover (code 9132), Ø 600

Rain gutter filter (code 6552)

Filter set (code 6248) Rain gutter shaft (code 7095)

(Channel) Ø 250 x 600

Sand trap with cover

• Rain gutter filter is designed for free-standing water tanks.

• Can be driven over, for personal vehicles of up to 600 kg in point source pressure.

DN 110, 125, 160 mm

• Water level measurement in tanks• Wireless and remote water level display by ten grades• Up to 300-meter range• Simple to install, no cable installation required• Battery charge• Long-life batteries.

3830010987223

3830010986349

ROTO-BGBlagoevgrad, Bulgaria tel: +359 (0) 897 056460 [email protected]

distributor:

Alibunar

Murska Sobota

Vinica

Ivanić Grad

ROTO Cleanwater - Water tanks for burial | Рото-БГ чиста вода - Резервоари...

Documents

Transcript of ROTO Cleanwater - Water tanks for burial | Рото-БГ чиста вода - Резервоари...