Rotary Evaporator Flayer - faraztebonline.comfaraztebonline.com/download/Labtech.pdf · ROTARY...
Transcript of Rotary Evaporator Flayer - faraztebonline.comfaraztebonline.com/download/Labtech.pdf · ROTARY...
�
ROTARY EVAPORATOR
With an innovative and ergonomic design, LabTech EV series rotary evaporator includes built-in vacuum controller, step programmable control, digital display, motorized vertical lift, timer function�and can be completed with LabTech vacuum pump and water chiller to reach top efficiency of process. Stand alone heating bath guarantees maximum safety in operations and easy maintenance.
Features � Complete solution with LabTech Rotary Evaporator, water chiller and vacuum
pump � Motorized lift � LCD Display for easy reading � Built in vacuum controller � Timer � Clockwise and counterclockwise rotation � Liquid bath suitable for both water and oil � Small footprint and compact assembly � Safe protections including automatic switch OFF in case of absence of liquid in
the bath and automatic lift up in case of power failure � PTFE/FKM sealing protection against corrosion � Best quality/price ratio on the market
� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �
e-mail: [email protected] www.labtechsrl.com
��
�
Specification of all EV series�
Model EV311 EV311PLUSEV311AD-VANCED
EV311VAC
Evaporation Volume 50-3000 ml 50-3000 ml 50-3000 ml 50-3000 ml
Rotation Speed 20-240 rpm 20-240 rpm 20-260rpm 20-260 rpm
Rotation Speed Control Adjustable control knob
Rotation Speed Display LED LCD LCD LCD
Head Tilt Angle 0-60° 0-60° 0-60° 0-60°
Rotation Motor Power 40W 40W 40W 40W
Lift up and down Motor Motor Motor Motor
Main Unit
Motorized Lift stroke 160 mm 160 mm 160 mm 160 mm
Model HB-03 HB-03PLUS
A HB-03PLUS
A HB-03PLUS
A
Temp. Range Ambient�
+180 �Ambient�
+180 �Ambient�
+180 �Ambient�
+180 �
Material SS 304 Teflon Coated
Teflon Coated
Teflon Coated
Heating Bath Temp. Control PID (LED) PID (LCD) PID (LCD) PID (LCD)
Heating Bath Temp. Accuracy ±1� (Water) ±2 �(Oil)
±1� (Water) ±2 �(Oil)
±1� (Water) ±2 �(Oil)
±1� (Water) ±2 �(Oil)
Heating Power 1300 W 1300 W 1300 W 1300 W
Diameter Heating Bath 250 mm 250 mm 250 mm 250 mm
Heating Bath
Volume Heating Bath 5 L 5 L 5 L 5 L
Timer - - Yes Yes
Clockwise/counter-clockwise rotation - - Yes Yes
Timer for clockwise/counter-clockwise Rotation
- - Yes Yes
Programmable Speed Control - - Yes Yes
Lift up when timer end - - Yes Yes
Built-in programmable vacuum control - Yes
Advanced Functions
Control on/off the vacuum pump - - - Yes
Condenser Vertical or Diagonal with 1200 cm2 condensing surface
Dimensions (LxWxH)
380mm × 340mm × 692mm (797mm for EV311VAC)
Weight 23 kg
e-mail: [email protected] www.labtechsrl.com
������������������������ ������������������ ����������� ���� �� !"��!���#$$�����%� !"��!���#�"����
�� �&� !"��!���#$$�����%&� !"��!���#�"����'()�� &����* ���+,�� �+�)�-������&�...� ���+,�� �+�)�
LABORATORY SOLUTIONS VP Vacuum Pumps
LabTech VP Vacuum pumps are totally oil free. Can be used in a multitude of applications as vacuum filtration, degassing, impregnation, drying chambers, rotary evaporators, distillation, gel dryers, gas analytical systems and roughing of wide-range turbo molecular pumps. Available with Solvent filtration system kit.
TECHNICAL PARAMETERS
Model Electrical Voltage
Power (W)
Max. Flow rate (l/min)
Structure Vacuum Pressure (absolute)
Noise Level Weight
VP30 220V/50Hz 80 30 Two ports 163mBar 58dB 2,5kg
VP32 220V/50Hz 80 30 Two ports 163mBar 50dB 2,5kg
VP50 220V/50Hz 100 50 Two ports 63mBar 50dB 6.0kg
For any questions on LabTech Vacuum Pumps, please write to [email protected]
Oil-free diaphragm pump Rugged, compact design Portable alloy aluminium case Low noise and vibration Two ports structure for different flow rate and pressure requirements High vacuum efficiency
GM Series Diaphragm Vacuum Pump GM-0.20, GM-0.33II, GM-0.33III, GM-0.50, GM-0.50II, GM-1.00. GM series diaphragm vacuum pump has the features of continuous oil free pumping, low noise level, higher efficiency, long lifetime. They were developed especially for laboratory operations. It satisfies the highest expectations in terms of precision, reliability and ease of use.This series of products have the features of more advanced design, wider working range, longer operating life and they are mainly used in medicinal products analysis, tenuously chemical engineering, biochemical pharmacy, mechanical test, teaching and scientific research, investigating and solving criminal case, etc.
They are also the ideal products to be used with sophisticated analytical apparatus together, such as high-accuracy chromatogram apparatus and revolve to evaporate instrument.
GM-0.20 GM-0.33II
GM-0.33III
GM-0.50 GM-0.50II
GM-1.00
Parameters:
Type GM-0.20 GM-0.33II GM-0.33III
Speed of Evacuation (l/m) 12 20 20
Extreme limit pressure �300 mbar �200 mbar �50 mbar
Dimensions (L x B x H) (mm) 195×98×156 235×140×210 282×130×210
Power (w) Single phase.75 200 250
Airscoop aperture (mm) �6 �6 �6
Temp. of working environment ( ) 7—40 7—40 7—40
Working temperature of pump body <55 <55 <55
noise DB <50 <50 <50
Pump Head Nylon PTFE coated PTFE coated
Diaphragm HNBR HNBR HNBR
Valves HNBR HNBR HNBR
Weight (Kg) 4 7.5 10
Type GM-0.50 GM-0.50II GM-1.00
Speed of Evacuation (l/m) 30 30 60
Extreme limit pressure �200 mbar �50 mbar �200 mbar
Dimensions (L x B x H) (mm) 215×165×270 282×130×210 282×155×210
Power (w) 200 250 250
Airscoop aperture (mm) �6 �6 �6
Temp. of working environment ( ) 7—40 7—40 7—40
Working temperature of pump body <55 <55 <55
noise DB <50 <50 <50
Pump Head PTFE coated PTFE coated PTFE coated
Diaphragm HNBR HNBR HNBR
Valves HNBR HNBR HNBR
Weight (Kg) 8 10 9 Application Examples
� Vacuum filtration � Filtration Unit � Vacuum distillation � Vacuum drying � On rotary evaporators � To extract and transfer gases � Gel drying
Features
� It can be in service under the condition of no working medium (no oil) and will not produce any pollution.
Moreover, air in the exchange bin is filtered to maintain clean.
� New technologies and materials are used in production for smooth operation and guarantee the ideal vacuum
and high rate of air flow.
� It operates with minimal friction, heat production, and no friction exhausts. The diaphragm is made of Nitrile
Rubber, which resists the corrosion and has long operating life.
� The self-cooling air draft system is designed in the body. This system can keep the machine continuously
running for 24 hours.
� The system can be regulated by pressure to meet the requirements of vacuum or controllable steady air stream
within certain range.
� Brand name components including the axletrees are used to maintain steady running, low noise and high
operating efficiency.
Vacuum Controller
LabTech Vacuum Controller is an electronic vacuum controller for rotary evaporator; it is light, compact and extremely easy to use. Commonly used solvents have different boiling points and vacuum evaporation levels and if the vacuum is not properly controlled, there is a risk of the evaporation being either too rapid or too slow, thus reducing recovery of vapors. To optimize the whole process it is necessary to connect an electronic vacuum controller to the pump to achieve correct vacuum in the system for all types of evaporation.
Specification:
Digital vacuum controller managed by microprocessorLCD displayVacuum control precision: 1kPaVacuum control range: 0.2kPa~100kPaProgrammable vacuum control (different vacuum pressure with different holding time)Internal gas discharge valve ensure high efficient and stable vacuum controlBuilt-in anticorrosive vacuum sensor with high precisionFully anticorrosion designAlarm when the vacuum control fail to reach to the desired valueDimension: 200LX200WX125HmmWeight:2.5Kg
LabTech Ltd. 89 October Hill Road, Suite 5A Tel: +1 508 893 8966/3515 New Englander Industrial Park, Fax +1 508 893 8967 Holliston, MA 01746 U.S.A. Email: [email protected] Web: www.labtechgroup.com
IN YOUR COUNTRY:
Refrigerated/Heating Circulator
LabTech refrigerate and heating circulator is the best option for cooling of small heating apparatus and equipments with low temperature requirements. It has been widely used in kinds of fields such as optical, lifescience and physical industry etc.
RH25-6A
RH25-12A RH40-12A
Features Both internal and external circulation functions are available Support both refrigerating and heating function Robust and reliable – designed for years of trouble-free service PID precise temperature control technique High and low temp. protection functions Large LCD display Temp. setting from -25 to +100 and -45 to +100 Temp. control accuracy ±0.05 Compact design with large bath volume Drain port is easily accessed
Specification
For any questions on LabTech Refrigerated/Heating Circulator, please send email to [email protected]
Accessory
Bath Bracket In order to facilitate user application, customized bath brackets are available.
Application
LabTech SrlVia fatebenefratelli 1/5, Tel: +39 035 576614 24010 Sorisole (BG), Fax: +39 035 4729414Italy Email: [email protected]
Web: www.labtechsrl.com
Model RH40-12A RH25-12A RH25-6A Temperature range -40 ~100 -25 ~100 -25 ~100
Temperature control mode PID(LCD) PID(LCD) PID(LCD) Temperature stability 0.05 0.05 0.05
Display resolution 0.1 0.1 0.1Heating power 2000w 2000w 2000w
550W@20 650W@20 200W@20500W@0 500W@0 150W@0
400W@-20 100W@-20 30W@-20Refrigeration capacity
100W@-35Pump capacity 6L/min@ 0.4bar 6L/min@ 0.4bar 6L/min@ 0.4bar
Reservior capacity 12L 12L 6L Bath Dimension 280x150x150mm 280x150x150mm 130x150x130mm
Overall Dimensions (L W H mm 400×550×728mm 400×550×728mm 235×445×620mm
Weight 59Kg 59Kg 34Kg
Rotary evaporator Distillation Calorimeter Fermenter Refractometer
Electrophoresis chamber Polarimeter Photometer Viscometer Rheometer ……
• Large heating surface. Fast and uniform heating. • Microprocessor chip for precise temperature control. • Constant heating and no electromagnetic interference. • Special high resistant coatings prevent corrosion and
guarantee long life. • Compact design combined with an elegant look.
HEATING SOLUTIONS Hotplates
LabTech EH and EG hotplates are designed to meet laboratory daily heating requirements. Their unique features include different digital temperature controller and anticorrosive or aluminium heating surface.
• Large heating surface. Fast and uniform heating. • Microprocessor chip for precise temperature
control. • Constant heating and no electromagnetic
interference. • Special high resistant coatings prevent corrosion
and guarantee long life. • Innovative design with stand-alone temperature
control box.
������������������������ ������������������ ����������� ���� �� !"��!���#$$�����%� !"��!���#�"����
�� �&� !"��!���#$$�����%&� !"��!���#�"����'()�� &����* ���+,�� �+�)�-������&�...� ���+,�� �+�)�
EH LINE TECHNICAL PARAMETERS
Model EH-20A Plus EH-20B EH-20D EH-35A Plus EH-35B
Heating Power 2000W
Power Supply 230V-50/60Hz
Temp. Control Mode Switch (digital display)
PID (digital display)
PID (digital display)
Switch (digital display) PID (digital display)
Temp. Stability �5°C �1� ±0.2°C �5°C ±2°C
Heating Mode Electrothermal Component
Temp. Range Ambient ~ 200� Ambient ~ 350°C
Material Aluminium alloy with anticorrosive coating Aluminium alloy and stainless steel
Corrosion-resistant Excellent Good
Continuing Working Time >48 hours
Heating Area 400×300mm
Dimensions(L�W�H) 400×300×120mm 400×300×150mm
Weight 18Kg
EG LINE TECHNICAL PARAMETERS
Model EG-20A
Plus EG-20B EG-35A Plus EG-35B
Heating Power 3000W
Power Supply 230V-50/60Hz
Temp. Control Mode Switch (digital display)
PID (digital display)
Switch (digital display) PID (digital display)
Temp. Stability �5°C �2� �5°C ±2°C
Heating Mode Electrothermal Component
Temp. Range Ambient ~ 200� Ambient ~ 350°C
Material Aluminium alloy with anticorrosive coating Aluminium alloy and stainless steel
Corrosion-resistant Excellent Good
Continuing Working Time >48 hours
Heating Area 600×400mm
Dimension(L�W�H) 600×400×110mm
Weight 30Kg
For any question on LabTech Hotplates, please write to [email protected]
Hotplate Magnetic Stirrer
Features of ES35A and ES35A-Pro
Magnetic stirrer with modern design Stainless steel plates or porcelain enamel heating surfaces Precise analogical stirrer speed control High electronic insulation degree (IP42) and external brushless motor guarantee long service time Separate safety circuit automatically stop heating when temperatures exceed 350°C
Features of ES35B and ES35B-Pro
New stir technology unit for unsupervised operations Stirrer bar breakaway function Easy-to-read backlit LCD display High accuracy heating/stirring controls Stainless steel plates or porcelain enamel heating surfaces for excellent chemical resistance Separate adjustable safety circuits External PT1000 temperature probe option
ES35A ES35A-Pro
ES35B ES35B-Pro
������������������������ ������������������ ����������� ���� �� !"��!���#$$�����%� !"��!���#�"����
�� �&� !"��!���#$$�����%&� !"��!���#�"����'()�� &����* ���+,�� �+�)�-������&�...� ���+,�� �+�)�
TECHNICAL PARAMETERS
ES35B / ES35B-Pro ES35A / ES35A-Pro Power [W] 550 530
Max. stirring volume�lt of H2O) 20 20
Motor type External rotor brushless motor
External rotor brushless motor
Motor rating input [W] 18 18 Motor rating output [W] 10 10 Speed range [rpm] 100-1500 0-1500 Speed display LCD Scale Speed display accuracy [rpm] 1 --
Material Porcelain enamel (B-Pro) Stainless steel (B)
Porcelain enamel (A-Pro) Stainless steel(A)
Heating plate dimension [mm] �135 �135 Heating power [W] 500 500
Heating rate (1lt of H2O�[K/min] 6 6
Heating Temperature Range [�] RT-340 RT-340
Temperature display LCD Analog Scale
Temperature display accuracy [�] 0.1 -
Control accuracy of heating
temperature [�] 1 -
Adjustable safety circuit
(heating plate)[�] 100-350 adjustable -
Control accuracy of heating temperature with external
temperature sensor [�] 0.2 -
External temperature sensor (Option)
PT1000 -
Dimension [mm] 280×160×85 280×160×85 Weight [kg] 2.8 2.8 Permissible ambient temperature
[�] 5-40 5-40
Permissible relative humidity 80% 80% Protection class acc. to DIN EN60529
IP42 IP42
������������������������ ������������������ ����������� ���� �� !"��!���#$$�����%� !"��!���#�"����
�� �&� !"��!���#$$�����%&� !"��!���#�"����'()�� &����* ���+,�� �+�)�-������&�...� ���+,�� �+�)�
LABORATORY SOLUTIONS ES Hotplate Stirrers
LabTech ES Hotplates Magnetic Stirrers are designed to provide high quality, space saving heating-stirring system for routine applications. Compact case design and PTFE coating guarantee long life-span. Electronics are sealed to protect sensitive components from hard environments and reduce maintenance time and costs.
TECHNICAL PARAMETERS
Model Electrical Voltage
Power (W)
Max.Temp. (°C)
Stability (°C)
Working dimensions
Surface Material
Max. Stirring Volume
ES20A 220V/50Hz 450 220° ±8° Ø 120mm Anticorrosive PTFE coating
5 Litres
ES30A 220V/50Hz 450 350° ±8° Ø 120mm Stainless Steel
5 Litres
For any questions on LabTech Hotplate Stirrers, please write to [email protected]
High level heating and stirring performances
Stirring speed from 0 to 2000 rpm, with smooth and rapid speed changes
Quiet direct drive motor/magnet system
Advanced safety and easy to clean features
Compact design and light weight
FAST
DigiBlockSolutions in Sample Preparation
COST EFFECTIVECLEAN ACCURATESIMPLEFAST
ED54EHD20EHD36
DigiBlock: your partner in metal digestion
DigiBlock digestion systems provide clean, economical, effi cient digestions.DigiBlock heating surface is made of graphite or stainless steel protected by PTFE.DigiBlock can accommodate as many as 54 graduated tubes and can operate from ambient temperature up to 415°C.LabTech off ers a complete range of hotblock digestion systems to suit customers needs:
DigiBlock complies with the highest international standards to perform EPA approved methods.DigiBlock use low cost, disposable digestion tubes to speed up and simplify the digestion process.The digestion tubes are clean, with no detectable background contaminants and do not require washing with acids prior to use.Diff erent sizes disposable tubes are available to meet your laboratory needs.
Fields of application
Food and Feed Environmental
Pharmaceutical Biochemistry
Clinical Paint chips
Sample preparation procedures account for approximately 85% of the time associated with atomic spectroscopy analysis.Quality, easy of use and speed are key factors in today’s analytical lab.
» Higher throughput of samples » Uniform temperature across the block » Minimum radiant heat loss » Reduced contamination » Cost savings by disposable digestion tubes
High energy effi ciency and top thermal insulation of electronics and heating block, allow all DigiBlock units to save electric power and have low operation costs.Graphite or PTFE coated stainless steel heating blocks eliminate metallic contamination of samplesand protect DigiBlock units from acid corrosion.All DigiBlock units include racks for sample handlingand a tube basic set (according to the model).
Stand alone
Stand alone
iTouch Terminal
iTouch Terminal
Plug and PlayIdeal for 1 step temperature rampsCompact and DurableLow electric power consumptionNo metal contaminationPC interface option
TFT 4.5 inch colour touch screen displayMethods storage capabilityExternal temperature sensor (optional)Real time temperature and data monitoring Limit temperature alarmsUp to 15 heating steps programmablePID Temperature controlFactory-stored methods
Includes all the advantages provided by the stand alone confi guration. LabTech iTouch terminal off ers all DigiBlock users an unique and innovative tool to match the most demanding control needs throu-ghout the entire sample digestion process.LabTech iTouch software provides a user-friendly con-trol of the sample digestion process with automatic and real-time monitoring of sample parameters.
DigiBlock confi guration options
Digestion Tubes
Racks
Model Electrical Power(Watts)
Max. Temp.(°C)
Accuracy(°C)
TubesN°
Heating blockmaterial
Dimensions(W*D*H mm)
Weight(Kg)
ED16S 220V/50Hz 1000 210° ± 0.2° 16 (100ml) Aluminium Alloy PTFE coated 390*380*190 22
ED36S 220V/50Hz 1400 210° ± 0.2° 36 (50ml) Aluminium Alloy PTFE coated 420*420*190 23
ED54 220V/50Hz 3000 240° ± 1° 54 (50ml) Graphite 536*398*290 42
EHD20 220V/50Hz 2800 415° ± 1° 20 (100ml) Graphite 408*353*290 26
EHD36 220V/50Hz 3000 415° ± 1° 36 (50ml) Graphite 398*398*290 35
LabTech Srl - Via Fatebenefratelli, 1/5 - 24010 Sorisole (BG) - ItalyTel: +39 035 576614 - Fax: +39 035 4729414www.labtechsrl.com - email: [email protected] Di
giBl
ock/
02/2
012
In your country:
P/N Material Max Temp. High Diameter Volume
GC-16 Glass 450°C 120mm 42mm 100ml
GC-20 Glass 450°C 170mm 42mm 100ml
GC-36-L Glass 450°C 180mm 30mm 50ml
GC-36-S Glass 450°C 120mm 30mm 50ml
SC36 PP 130°C 105mm 30mm 50ml
TF-16 PTFE 210°C 125mm 42mm 100ml
TF-20 PTFE 210°C 165mm 42mm 100ml
TF-36 PTFE 210°C 125mm 30mm 50ml
P/N Material Dimensions (mm)
Diameterof holes
Quantityof holes
BKS-16 Stainless Steel 270×270×80 44mm 16
BKS-20 Stainless Steel 310×260×70 44mm 20
BKS-36 Stainless Steel 495×146×190 32mm 18
BKT-36 PTFE Coated 281×150×100 32mm 18
BKT-36S Stainless Steel 270×150×100 32mm 18
BKT-54 PTFE Coated 260×150×100 32mm 18
All models can be confi gured with iTouch terminal
Accessories
Technical Specifi cations