ROOFTOPS - Trane€¦ · ROOFTOPS Product Presentation – October 2016 INTEGRATED plug & play...
Transcript of ROOFTOPS - Trane€¦ · ROOFTOPS Product Presentation – October 2016 INTEGRATED plug & play...
ROOFTOPS
Product Presentation – October 2016
INTEGRATED plug & play solutionIDEAL performance & lowest cost of ownershipINSTANT replacement for lower installation costs
Agenda
• The Airfinity™ Advantage• Product Range• Key Product Features• Energy saving solutions• Heat Recovery Solutions• Controls Solutions• Airfinity Solar• Contact
I means…
IDEAL performanceo Seasonal efficiency compliant with EcoDesign Lot 21o Eurovent Class A or B
INTEGRATED solutiono Compact and modular design with fully integrated controlso Designed for easy access and maintenance
INSTANT plug & playo Maximum adaptability for faster, easier, less expensive
installationso Compatible with multiple roofcurbs – without expensive adapters
or other modifications – even with a heat recovery module!
INTELLIGENT control o TRANE® software accumulating years of HVAC expertiseo Free cooling and heat recovery solutions for lower total cost of
ownership
Advantage
Easy start-up- Easy to adapt to customer installation- Airflow setting done in one minute- Use of standard components
Easy maintenance- Easy access to filtration and key components- Clogged filter detection- Alarm management- Remote control
Easy replacement- Customizable Return & supply air- Available static pressure up to 500 Pa- No roofcurb required for heat recovery module- Light weight design- Wireless technology
Value Throughout Total Lifecycle
Data according to Eurovent standard conditions
Due to Trane’s commitment to quality and environmental sustainability, the specifications, ratings and dimensions are subject to change without notice and without incurring liability
Product Range
Size – IH Models 039 049 059 064 074 084 040 050 060 065 075 085 100 110 130
Nominal airflow m3/h 8,200 10,000 11,100 12,400 15,500 16,700 8,700 10,600 12,100 13,700 15,700 16,700 19,800 21,600 25,500
Circuits / Comp. 2/2 2/2 2/2 2/2 2/2 2/2 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4
Cooling capacity kW 43 52 58 65 80.5 87.1 46 56 64 72 83 88 104 114 135
EER 3.35 3.13 2.84 2.62 3.04 2.85 3.50 3.37 3.30 3.01 3.03 2.91 3.02 2.81 2.63
Eurovent class A A B C A B A A A A A B A B C
Heating capacity kW 38 47 53 63 70.7 78.4 39 49 55 64 72 77 92 104 125
COP 3.41 3.28 3.14 3.09 3.43 3.32 3.41 3.36 3.21 3.28 3.41 3.32 3.43 3.32 3.21
Eurovent class A B C C A B A B B B A B A B B
Length mm 3020 3900 3020 3900 3900
Width mm 2250 2250 2250 2250 2250
Height mm 1575 1595 1575 1595 1900
Refrigerant type R410A
• Heat recovery module• Dehumidification• Low ambient• Dirty filter detection• Etc.
And much more!
Possible Configurations
• Electric heater• Hot water coil• Gas burner (2-stage or modulating)
Auxiliary heat
• Barometric relief damper• Exhaust Fan (ESP = 70 Pa)• High speed Exhaust Fan (ESP=140 Pa)• Return roofcurb (ESP = 250 Pa)
Building Pressurization Control
• G4 (50mm)• G4 (50mm) + F7 (100mm)• G4 (50mm) + F9 (100 mm)
Filtration• Multi-rooftop management• Tracer® Concierge• Tracer® SC• ModBus, LonTalk, BacNet
System control• Downflow*• Horizontal flow*• Multi-directional roofcurb*Convertible on-site
Airflow configurations
* Non-exhaustive and subject to change. For availability of options, please contact your Trane Sales Representative
OUTDOOR SECTION & BASEFRAME
Easy handlingLifting holes designed to avoid damaging of the unit during transportation. Unit’s robust structure also minimizes the need for packaging, reducing on-site waste after installation.
High efficiency scroll compressors in tandemDelivers high performance in part load thanks to capacity modulation. Capable of meeting future EcoDesign regulations, with SEER up to 3.5.
Easy-access panelsCan be removed easily using a common turn-key (no screws!). Prevents corrosion and missing components after service.
Dual refrigeration circuitOn top of improving capacity modulation and increasing part load efficiency, having two circuits also maximizes reliability by providing system redundancy
Electronic Expansion Valve (EEV)Thanks to its tight control and ability to operate at a lower condensing pressure, the EEV creates additional opportunities for energy savings.
Quick adaptAirfinity units are ideal for replacement jobs thanks to their compatibility with multiple roofcurbs (Trane and non-Trane)
Key Features
EC Plug FanCompact, quiet and more efficient compared to traditional axial fans. Rail system for easy access and maintenance.
Economizer with intelligent controlProvided as standard with every Airfinity™ unit, the economizer permits free cooling when conditions are favorable, saving up to 20% on annual energy consumption.
Embedded control solutionsTrane controller with embedded energy saving functionalities. Centralized control panel for easy access and service. Remote service terminal provided as an option.
High QualityAir FiltrationTwo rails for wide range of filtration up to F9, capable of meeting local regulations
Epoxy coatingHigh quality epoxy coating can be provided on fin & tube heat exchanger to prevent corrosion and extend unit lifetime
Fresh air hoodFoldable for easy transportation and installation
Sloped drain panNon-corrosive sloped drain for improved condensate management, thus preventing formation of microbial agents that lead to poor air quality.
Double skin panelDouble wall and thick glass wool insulation provided as standard with all units, for higher indoor air quality.
INDOOR SECTIONKey Features
SOLUTIONS
Heat Recovery Utilizes leading rotary wheel technology Light and compact without need for additional roofcurb Plug & play solution – easy on-site installation Designed by TRANE for optimized performance at typical applications Reliable technology, even in extreme winter conditions
Tracer Concierge™ Ideal for retail applications Change HVAC and lighting schedules using one interfaceMake allowable temperature and humidity set point changes Receive notification of HVAC unit conditions or problems User-friendly display panel allows limited adjustments Compatible with wireless technology
Free Cooling & Fresh Air Management Managed by Trane controller for maximum energy savings Comparative Enthalpy control measures both temperature and
humidity to determine favorable conditions for free cooling Up to 100% fresh air management
See video: https://youtu.be/YAWt0QIJo-o
Energy Savings
Fresh Air & Free Cooling
Thanks to the Economizer, provided as standard on all Airfinity™ units, you can take full advantage of outdoor conditions while utilizing fresh air, in order to reduce your operating costs.
ModBus-driventechnology for easy integrationinto BMS
• Adjustable minimum fresh air %or• Intelligent fresh air management (Free Cooling)
• Dry Bulb Control (∆°C)or• Enthalpy control (∆kJ/kg)or
• Demand ventilation control, based on:• CO2 level in the room• Occupied/Unoccupied mode• Morning warm-up• Etc.
PL Eff% = Up to 15% gain
Efficiency Gain
-10dB
Lower Noise 95% of time
• Prevent cold shower effect• Less air stratification when using
auxiliary heat• No rubber dust due to Belt wearing• Limited vibrations• Airflow setting on front panel for quick
start-up and commissioning• Reduced starting amps (compliant
with textile ducts)• Lower weight / lower installation cost
Comfort& Reliability
Modulating Airflow
For a typical retail application, your rooftop unit will run in part load more than 95% of the time.
That’s why we integrated EC plug fans with modulating airflow as a standard on all Airfinity™ units, so that you can maximize comfort and efficiency… especially at part load conditions!
MODULE
Principle
Trane’s Heat Recovery Module (HRM) utilizes the enthalpy wheel, thanks to its capability to transfer both sensible heat and moisture. While the wheel rotates through the two air streams, it absorbs sensible heat and moisture from the hot, humid air stream and releases it into the cooler, drier air stream.
* 30% of nominal airflow
Model Size 041 048 058 067 077 085 100 115 133
Dry efficiency, ε (%) 81 80 78 77 75 73 71 76 74
Wheel diameter (mm) 1200 1200 1200 1200 1200 1200 1200 1500 1500
Airflow through the wheel* (m3/s) 2340 2740 3310 3820 4400 4850 5700 6560 7600
Performance data Typical application (30% fresh air)
Heat Recovery
MODULE
Convenient
o Plug & Play: main unit pre-configured in the factoryo Quick installation: No additional roofcurb required!o Light and compact: for easy transportation and handling
Efficient
o High ROI: Typical return on investment of 2 to 3 yearso Tight insulation: Double sheet metal skino Free cooling: thanks to bypass damper and controls
Reliable
o Freeze protection for low ambient applicationso Easy access to key componentso Pressure drop sensor through the module
1
2
Heat Recovery
MODULE
Bypass damper (for up to 100% fresh air circulation and free cooling)
EnthalphicRotary Wheel
Exhaust fan
Barometric relief damper
Fresh air filter
Temperature sensors(protection against frost)
Fresh air hood
Heat Recovery
Comprehensive Controls Offering
• Remotemonitoring and control
• Alarm and eventreporting
• Trendinganalytics
BasicTracer Concierge™
Tracer SC
CH536 Unit controller
THS04 User interface
• Manage HVAC settings and schedule
• Manage lighting schedules
• Make allowable temperature and humidity set point changes
• Alarm push notifications
• Temperature and airflow control
• Fresh air management• Free cooling and heat
recovery control• Auxiliary heating control• LONTalk, ModBus,
BacNet
• Temperature and humidity setpointadjustment
• Fresh air management
Valu
e
• BACnet• Web-based• Mobile app
• Read and modifyunit parameters
• Alarmmanagement
• Remote unit control
• Can be mountedinside the building
Installation size
• BACnet• Mobile app
• Optional display
• Manage HVAC settings and schedule
• Make allowable temperature and humidity set point changes
• Alarm push notifications
Advanced
PGD Service terminal
Single unit Single zone Multiple zones
Airfinity Solar Solutions
Building
Exported power
Imported power
DCPV
generation
Electriccabinet
Electricmeter
By installing solar panels to power your HVAC equipment, you can reduce your carbon emissions and peak time electricity consumption.
At the same time you can put unexploited rooftop space to good use while protecting your operation from future electricity price fluctuations.
Airfinity Solar Solutions
Building
Exported power
Imported power
DCPV
generation
Electriccabinet
Electricmeter
• Value solution: Designed for high performance, easy installation and trouble-free operation in combination with the Trane Airfinity™ rooftop
• Complete package: You no longer need to think about your PV installation and HVAC equipment separately. Trane can provide you with the complete package, ensuring you have the optimum design for your installation.
• Independent and reliable: The system is designed to be entirely based on self-consumption, which means you can eliminate the heavy bureaucratic load traditionally associated with these kinds of systems.
• Ideal for BREAAM / LEED building certification: Increase the value of your property by using completely renewable and sustainable technologies
Contact your Trane Representative today for a simulation!