April 2, 2013

As an ongoing eff ort to improve the erectibility our products, add value, and expand services; Nucor Building Systems is announcing the following roof tools that are available to aid in the erection of our roof systems:• Nucor CFR™ Roof System Power Tool: D.I. Revolution™ (6 month warranty)• Nucor CFR™ Roof System Accessory Tools (1 year warranty)• Nucor VR16 II™ Roof System Accessory Tools (1 year warranty)

Critical DatesTh e above tools are currently off ered as a buy out from your local Nucor Building Systems Plant and available on the eComponents site at: http://www.nucorbuildingsystems.com/ecomponents or by contacting your local component technician for additional information.

NBS Indiana NBS South Carolina NBS Texas NBS UtahGuy Emberton Monica Owen Bob Leonard Th ayne Smith(260) 837-9392 (803) 381-9389 (972) 551-5685 (435) 919-3164

Our CommitmentNucor Building Systems is committed to ongoing improvements in all aspects of our business. Th is change is intended to enhance our product off erings and improve our costs and competitiveness in the market place. Your input and comments are always greatly appreciated. If you have specifi c questions regarding this bulletin or any other area of our business, please contact your District Sales Manager, Customer Service Representative, or our Product Development Department.

See additional details attached.

Roof Accessory Tools off ered by Nucor

Nucor CFR™ Roof System Power Tool: D.I. Revolution™

The D.I. REVOLUTION™ performs perfect, consistent crimps at the push of a button.

This battery-powered crimper eliminates your need for an electric roof seamer on small projects, greatly reduces the manual labor required on the large ones, and is designed to make fast work of crimping and securing your project under budget and ahead of schedule.

The D.I. REVOLUTION™ completesa Nucor Roll Lock™ crimp on a Nucor CFR™ roof. If used continuously, it forms a fi nished Nucor Vise Lock® seam.

PRODUCT FEATURES:

• 19” extension shaft allows tool to be used while standing up. (Total height 34.25”)

• Variable-speed trigger.• Built-in LED work light for low-light

situations.• Over 650 in-lbs of torque for thick

materials.• More than 270 crimps per battery

charge with continuous use*.

Contact your local component technician to purchase this product or your NBS representative for more information.

STATISTICS

WEIGHT 15.5 lbs.

DIMENSIONS 12” x 15.25” x 4.25”

POWER 18V High Capacity Lithium-Ion Battery

SIZE 6.75” crimp

PURCHASE PRICE $2,999 (plus tax & shipping) Includes: D.I. REVOLUTION™, two (2) rechargeable 18V Lithium-Ion batteries, optional side handle, user guide, battery charger, storage/shipping case, and extension shaft for standup operations.

Model Number 70520

* This is under extreme conditions with very heavy gauge metal, oversized clips, additional layers of material and con-tinuous use without time for battery to recover. Average use can expect as much as 700+ crimps per battery charge.

The D.I. REVOLUTION™ performs perfect,consistent crimps at the push of a button to complete a Nucor Roll Lock™ crimp on a Nucor CFR™ roof.

Small CFR & VR16 II Hand Crimper (H8100)Used to perform the Roll Lock/Vise Lock Seam to the panel rib.

Small CFR Hand Crimper (H8150) Produces a Nucor Vise Lock 360® Crimp.Used in conjunction with the Roll Lock/Vise Lock Seam Hand Crimpers.

Standup CFR Hand Crimper (H8000)Used to perform the Roll Lock/Vise Lock Seam to the panel rib.

Standup CFR Hand Crimper (H8200) Produces a Nucor Vise Lock 360® Crimp.Used in conjunction with the Roll Lock/Vise Lock Seam Hand Crimpers.

Adjustable CFR Modularity Clamp (H7100)Used to help keep panel modularity while installing the roof.

CFR Endlap Clamp (H7200)Used in the endlap installation and the compression of the fi nished endlap seam.

Nucor CFR™ Roof System Accessory Tools

Adjustable CFR Modularity Tool (H9510) Aids in panel modularity.

Nucor VR16 II™ Roof System Accessory Tools

VR16 II Rib Clamp (H7300) Used to help keep panel modularity while installing the roof.

VR16 II Panel Hemmer (H9005) Used to hem on the low eave end of the panel when you have 0” offset clips.

Standup VR16 II Hand Crimper (H9000) Used to perform the Vise Lock Seam to the panel rib.