Rolli the ghost indicator - PrusaPrinters · 2019-10-28 · 1 hrs 2 pcs f 0.20 mm k 0.40 mm h PLA 4...
3
1 hrs 2 pcs f 0.20 mm k 0.40 mm h PLA 4 g d MK3/S Summary This is Rolli the Hausgeist or enclosure ghost actually. 3D Printers > Other Accessories indicator halloween extruder Rolli the ghost rolling its eyes over extruder loading actions: "https://www.youtube.com/embed/UHgFGE_-Slk" There are two files: One for the white parts including the face, teeth and irises for Rolli. One for the black parts including the back cover and the eye balls. You need an 8x5mm magnet to connect Rolli to your extruder Motors rotator. You'll find them on Amazon or you can support a Maker and buy it here. 1. Glue the magnet into the white gear. Superglue works best for me. 2. Put it through the black backplate and try if it moves freely when put onto the Extruder Motor. 3. Glue the irises into the eyeballs 3DWatsch Rolli the ghost indicator VIEW IN BROWSER updated 28. 10. 2019 | published 28. 10. 2019
Transcript of Rolli the ghost indicator - PrusaPrinters · 2019-10-28 · 1 hrs 2 pcs f 0.20 mm k 0.40 mm h PLA 4...
1 hrs
2 pcs
f
0.20 mm
k
0.40 mm
h
PLA
4 g
d
MK3/S
Summary
This is Rolli the Hausgeist or enclosure ghost actually.
3D Printers > Other Accessories
indicator halloween extruder
Rolli the ghost rolling its eyes over extruder loading actions:
"https://www.youtube.com/embed/UHgFGE_-Slk"
There are two files: One for the white parts including the face, teeth andirises for Rolli. One for the black parts including the back cover and theeye balls.
You need an 8x5mm magnet to connect Rolli to your extruder Motorsrotator. You'll find them on Amazon or you can support a Maker and buy it here.
1. Glue the magnet into the white gear. Superglue works best for me.2. Put it through the black backplate and try if it moves freely when put
onto the Extruder Motor. 3. Glue the irises into the eyeballs
3DWatsch
Rolli the ghostindicator
VIEW IN BROWSER
updated 28. 10. 2019 | published 28. 10. 2019
Print Files (.gcode) DOWNLOAD ALL FILES
467.4 KB
0.28 hrs f 0.20 mm k 0.40 mm h PLA 2.10 g d MK3/S
updated 20. 10. 2019
563.4 KB
0.28 hrs f 0.20 mm k 0.40 mm h PLA 2.00 g d MK3/S
updated 20. 10. 2019
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
152.7 KBupdated 20. 10. 2019
187.4 KBupdated 20. 10. 2019
4. Put the eyeballs onto the backplate and snap the face onto thebackplate
5. Again, make sure everything moves nicely.6. Snap Rolli onto the extruder motor7. Let Rolli do it's spooky magic
I hope you enjoy it :)
This remix is based on
NEMA (extruder) motor rotation indicator
by Petclaud
white_parts_face_iris_teeth_02mm_pla_mk3s_17m.gcode
black_parts_backplate_gears_02mm_pla_mk3s_17m.gcode
white_parts_face_iris_teeth.stl
black_parts_backplate_gears.stl
2.7 MBupdated 28. 10. 2019
License
This work is licensed under a Creative Commons (International License)
Public Domain
✔ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition
rolli.stp
