Roadsafe and OzTec Suspensionroadsafe.com.au/wp-content/uploads/2014/07/... · With motorsport...
Transcript of Roadsafe and OzTec Suspensionroadsafe.com.au/wp-content/uploads/2014/07/... · With motorsport...
-
4x4 Suspension
Who is OzTec Suspension?
OzTec Suspension is the brand name of a first class range of 4WD suspension components researched, developed and tested by GSA Wholesale Suspension in Australia to suit Australian conditions.
GSA Wholesale Suspension Pty Ltd is a genuine wholesale outlet owned and operated by George Shepheard who has over 40 years experience in the automotive and suspension industry.
With motorsport results to his credit such as winning three Australian Rally Championships, eight state rally championships, two Round Australia rallies in 1979 and 1995 and two Bathurst 1000 races working with such greats as Peter Brock , Jim Richards , Dick Johnson and Ed Ordynski,just to name a few, George’s experience goes without question.
OzTec shock absorber development
The Research and Development team have taken the OzTec shock absorber range a step further by developing the “Comfort” range to suit lightly loaded vehicles with minimal accessories where comfort is the priority.
Then there is the “Cargo” range of shock absorbers designed and valved to control the extra weight when steel bull bars, winches, roof racks, long range tanks and the like are fitted.
Using the latest computerised shock absorber dyno, the valve forces have been engineered to obtain the best all round suspension control resulting in improved ride quality with superior handling and braking.
So now you can select the best outcome for your customer’s particular needs.
To guarantee a high quality product good enough to carry a Lifetime Warranty, we have chosen two of the worlds most highly regarded shock absorber manufacturers; “Cofap” of Brazil and “Sachs” of Germany to manufacture our OzTec shock absorbers.
How to select from the OzTec Program
Due to the many and varied optional extras fitted to vehicles such as Bull Bars, Winches, Roof Racks and so on, the catalogue has been set out in a “menu for the vehicle” style to assist you in choosing the most appropriate shock absorbers for a given application relevant to the type of accessories fitted.
Sometimes you may need to mix and match where a vehicle has a steel bull bar and winch but carries no extra weight in the back, the choice of Cargo for the front and Comfort for the rear will usually give the best outcome of control and ride comfort.
-
4x4 Suspension
Copyright: All rights reserved. No part of this catalogue may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without permission in writing from OzTec Suspension. ABN 16101241267§= Part number still in development. � = Old reference number - while stocks last.
Product Index Vehicle Page NumberChrysler Jeep ~ Cherokee, Grand Cherokee & Wrangler 1~2 Daihatsu ~ Feroza 3Daihatsu ~ Rocky 4~6Daihatsu ~ Scat 6Ford ~ Bronco 7Ford ~ Courier 7Ford ~ F Series 8Ford ~ Maverick 9~11Ford ~ Raider 12Ford ~ Ranger 13Great Wall ~ X240 14Holden ~ Colorado 15Holden ~ Frontera 16Holden ~ Jackaroo 16~18Holden ~ Monterey 18Holden ~ Rodeo 18~21Hyundai ~ Terracan 22Isuzu ~ D-Max 22~23Isuzu ~ MU (Mysterious Utility) 23Land Rover ~ County 23~25Land Rover ~ Defender 25~26Land Rover ~ Discovery 26~27Land Rover ~ Range Rover 28Mazda ~ Bravo 29Mazda ~ BT50 30Mitsubishi ~ Challenger 31~32Mitsubishi ~ Delica 32~34Mitsubishi ~ L200,300 34~35Mitsubishi ~ Pajero 35~40Mitsubishi ~ Triton 40~44Nissan ~ Navara 44~46Nissan ~ Pathfinder 47Nissan ~ Patrol 48~52Nissan ~ Terrano & Terrano ll 53~54Suzuki ~ Sierra 55~56Suzuki ~ Vitara, 57~58Suzuki ~ Grand Vitara 58~59Toyota ~ 4 Runner 60~63Toyota ~ Hi Lux 64~68Toyota ~ Landcruiser 69~83Toyota ~ Prado 84Toyota ~ Rav4 85~86Toyota ~ Surf 86~89Numerical List ~ Shock Absorbers 90~91Numerical List ~ Steering Dampers 92Numerical List ~ Camber Correction Kits 92Landcruiser 200 Series KDSS information 93Shock mounting & measurement diagrams 94Warranty Statement OzTec Shock Absorbers 95Warranty Assessment Form 96
-
4x4 Suspension Front Rear
MAKE & MODEL
YEAR
Shock Absorber
Spring Type
Shock Mount Open~ Closed
Shock
Absorber
Spring Type
Shock Mount Open~ Closed
Copyright: All rights reserved. No part of this catalogue may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without permission in writing from OzTec Suspension. ABN 16101241267 Page 1§ = Part number still in development. � = Old reference number - while stocks last.
Chrysler Jeep Cherokee XJ Classic, Sport, Limited Standard height Coil Spring Front Leaf Spring Rear
Standard height
1995~2000
60420 Original Coil S1 /E3 568~345 60421 Original LeafE3 / E1 570~355
Cherokee XJ Classic, Sport, Limited Raised height Coil Spring Front Leaf Spring Rear
Raised 30~40mm
1995~2000
60420 Raised Coil S1 /E3 568~345 60421 Raised LeafE3 / E1 570~355
Grand Cherokee ZG,ZJ Laredo, Limited 6cyl Standard height Coil Spring Front Coil Spring Rear
1996~1999
60420 Original Coil S1 /E3 568~345 60422 Original CoilE1 / E2
545~346
Grand Cherokee WG,WJ Laredo, Limited, Overland. 2.7TD,4.0 & 4.7 V8 Std height Coil Spring Front Coil Spring Rear
1999~2004
60423 Original Coil S1 /E3 550~335 60424 Original CoilE2 / E2
595~360
Cherokee KJ Standard height Coil Spring Front Coil Spring Rear
2001~ 80103 § Original Coil S1 /E2 349~244C-Clamp Strut
50414 § Original Coil E2 / E2 560~344
Cherokee KJ Raised height Coil Spring Front Coil Spring Rear
Raised 40~50mm
2001~ 80103 § Raised Coil S1 /E2 349~244C-Clamp Strut
50414 § Raised Coil E2 / E2 560~344
-
4x4 Suspension Front Rear
MAKE & MODEL
YEAR
Shock Absorber
Spring Type
Shock Mount Open~ Closed
Shock
Absorber
Spring Type
Shock Mount Open~ Closed
Copyright: All rights reserved. No part of this catalogue may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without permission in writing from OzTec Suspension. ABN 16101241267 Page 2§ = Part number still in development. � = Old reference number - while stocks last.
Chrysler Jeep continued Wrangler TJ Standard height Coil Spring Front Coil Spring Rear
1996~2005
60420 Original Coil S1 /E3 568~345 50410 Original CoilE3 / E2 495~305
Wrangler TJ Raised height Coil Spring Front Coil Spring Rear
Raised 30~40mm
1996~2005
60420 Raised Coil S1 /E3 568~345 50411 Raised CoilE3 / E2 525~300
-
4x4 Suspension Front Rear
MAKE & MODEL
YEAR
Shock Absorber
Spring Type
Shock Mount Open~ Closed
Shock
Absorber
Spring Type
Shock Mount Open~ Closed
Copyright: All rights reserved. No part of this catalogue may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without permission in writing from OzTec Suspension. ABN 16101241267 Page 3§ = Part number still in development. � = Old reference number - while stocks last.
Daihatsu Feroza F300 Standard height Comfort Adj’ Torsion Bar front Leaf spring rear
Standard height
10/88~1992
50031 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 344~226 50260 Original Leaf
S1 / E1 491~304
Feroza F300 Raised height Comfort Adj’ Torsion Bar front Leaf spring rear
Raised 30~40mm
10/88~1992
50031 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 344~226 50260
Raised Leaf S1 / E1 491~304
Feroza Wide Track F310 Standard height Comfort Adj’ Torsion Bar front Leaf spring rear
Standard height
1992~1997
50031 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 344~226 50116 Original Leaf
S1 / S1 470~272
Feroza Wide Track F310 Raised height Comfort Adj’ Torsion Bar front Leaf spring rear
Raised 30~40mm
1992~1997
50031 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 344~226 50116 Raised Leaf
S1 / S1 470~272
-
4x4 Suspension Front Rear
MAKE & MODEL
YEAR
Shock Absorber
Spring Type
Shock Mount Open~ Closed
Shock
Absorber
Spring Type
Shock Mount Open~ Closed
Copyright: All rights reserved. No part of this catalogue may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without permission in writing from OzTec Suspension. ABN 16101241267 Page 4§ = Part number still in development. � = Old reference number - while stocks last.
Daihatsu continued Rocky Hard Top Diesel F70 SWB, F75 LWB Standard height Comfort
50260 Original Leaf S1 / E1 491~304Leaf spring front Leaf spring rear Standard height
1984~08/93
Steering Damper 40011E2 / E2 575~395
50260 Original Leaf S1 / E1 491~304
Rocky Hard Top Diesel F70 SWB, F75 LWB Raised height Comfort50260 Raised Leaf S1 / E1 491~304Leaf spring front Leaf spring rear
Raised 40~50mm
1984~08/93
Steering Damper 40011E2 / E2 575~395
50260 Raised Leaf S1 / E1 491~304
Rocky Hard Top Diesel F70 SWB, F75 LWB Raised height Cargo50260 Raised Leaf S1 / E1 491~304Leaf spring front Leaf spring rear
Raised 40~50mm
1984~08/93
Steering Damper 40011E2 / E2 575~395
50260 Raised Leaf S1 / E1 491~304
Rocky Hard Top Petrol F80 SWB, F85 LWB Standard height Comfort50260 Original Leaf S1 / E1 491~304Leaf spring front Leaf spring rear
Standard height
1984~08/93
Steering Damper 40011E2 / E2 575~395
50260 Original Leaf S1 / E1 491~304
Rocky Hard Top Petrol F80 SWB, F85 LWB Raised height Comfort50260 Raised Leaf S1 / E1 491~304Leaf spring front Leaf spring rear
Raised 40~50mm
1984~08/93
Steering Damper 40011E2 / E2 575~395
50260 Raised Leaf S1 / E1 491~304
-
4x4 Suspension Front Rear
MAKE & MODEL
YEAR
Shock Absorber
Spring Type
Shock Mount Open~ Closed
Shock
Absorber
Spring Type
Shock Mount Open~ Closed
Copyright: All rights reserved. No part of this catalogue may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without permission in writing from OzTec Suspension. ABN 16101241267 Page 5§ = Part number still in development. � = Old reference number - while stocks last.
Daihatsu continuedRocky Hard Top Petrol F80 SWB, F85 LWB Raised height Cargo
50260 Raised Leaf S1 / E1 491~304Leaf spring front Leaf spring rear Raised 40~50mm
1984~08/93
Steering Damper 40011E2 / E2 575~395
50260 Raised Leaf S1 / E1 491~304
Rocky Hard Top F78,F85 (IFS) Standard height Comfort Adj’ Torsion Bar front Coil spring rear
Standard height
5/93~ 50041 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 398~262 51280 Original Coil
S1 / E2 630~360
Rocky Hard Top F78,F85 (IFS) Raised height Comfort Adj’ Torsion Bar front Coil spring rear
Fr: Raised 20~30mm Rr: Raised 30~40mm
5/93~ 50041 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 398~262 51280 Raised Coil
S1 / E2 630~360
Rocky Tray Back Diesel F77 Standard height Comfort50260
Original Leaf S1 / E1 491~304
Leaf spring front Leaf spring rear
Standard height
1984~08/93
Steering Damper 40011E2 / E2 575~395
50111 Original Leaf E1 / S1 480~290
Rocky Tray Back Diesel F77 Raised height Comfort50260
Raised Leaf S1 / E1 491~304
Leaf spring front Leaf spring rear
Raised 40~50mm
1984~08/93
Steering Damper 40011E2 / E2 575~395
60080 Raised Leaf E1 / S1 585~350
-
4x4 Suspension Front Rear
MAKE & MODEL
YEAR
Shock Absorber
Spring Type
Shock Mount Open~ Closed
Shock
Absorber
Spring Type
Shock Mount Open~ Closed
Copyright: All rights reserved. No part of this catalogue may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without permission in writing from OzTec Suspension. ABN 16101241267 Page 6§ = Part number still in development. � = Old reference number - while stocks last.
Daihatsu continued Rocky Tray Back Diesel F77 Raised height Cargo
50260 Raised Leaf S1 / E1 491~304Leaf spring front Leaf spring rear Raised 40~50mm
1984~08/93
Steering Damper 40011E2 / E2 575~395
60080 Raised Leaf E1 / S1 585~350
Rocky Tray Back F87 Petrol Standard height Comfort50260 Original Leaf S1 / E1 491~304Leaf spring front Leaf spring rear
Standard height
1984~08/93
Steering Damper 40011E2 / E2 575~395
50111 Original Leaf E1 / S1 480~290
Rocky Tray Back F87 Petrol Raised height Comfort50260 Raised Leaf S1 / E1 491~304Leaf spring front Leaf spring rear
Raised 40~50mm
1984~08/93
Steering Damper 40011E2 / E2 575~395
60080 Raised Leaf E1 / S1 585~350
Rocky Tray Back F87 Petrol Raised height Cargo50260 Raised Leaf S1 / E1 491~304Leaf spring front Leaf spring rear
Raised 40~50mm
1984~08/93
Steering Damper 40011E2 / E2 575~395
60080 Raised Leaf E1 / S1 585~350
Scat F10,F20,F50,F60 Standard height ComfortLeaf spring front Leaf spring rear
Standard height
8/75~1984
50110 Original Leaf E1 / E1 520~318 50110 Original LeafE1 / E1 520~318
-
4x4 Suspension Front Rear
MAKE & MODEL
YEAR
Shock Absorber
Spring Type
Shock Mount Open~ Closed
Shock
Absorber
Spring Type
Shock Mount Open~ Closed
Copyright: All rights reserved. No part of this catalogue may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without permission in writing from OzTec Suspension. ABN 16101241267 Page 7 § = Part number still in development. � = Old reference number - while stocks last.
Ford Bronco Standard height (Twin shock front suspension) Coil spring front Leaf spring rear
1980~1989
60701 Original Coil S1 / E2 398~262 50062 Original Leaf E1 / E2 585~353
Bronco Standard height (Quad shock front suspension) 60701 Behind axle
S1 / E2 398~262
Coil spring front Leaf spring rear
1980~1989
50260 Forward of axle
Original Coil
S1 / E1 491~304
50062 Original Leaf E1 / E2 585~353
Courier Standard height Comfort 60641* * Top mount to chassis reinforcing bracket required on models 02/99 onward
Adj’ Torsion Bar
Wheel Align’ Req’ if height altered
S1 / E2 368~240
Adj’ Torsion Bar front Leaf spring rear
Standard height
1987~2005
Chassis bracket 32012* *Required on models 02/99 onward
1 Kit
60250 Original Leaf E1 / E2 630~380
Courier Standard height Cargo 60641* * Top mount to chassis reinforcing bracket required on models 02/99 onward
Adj’ Torsion Bar
Wheel Align’ Req’ if height altered
S1 / E2 368~240
Adj’ Torsion Bar front Leaf spring rear
Standard height
1987~2005
Chassis bracket 32012* *Required on models 02/99 onward
1 Kit
60251 Original Leaf E1 / E2 630~380
Courier Raised height Comfort 60641* * Top mount to chassis reinforcing bracket required on models 02/99 onward
Adj’ Torsion Bar
Wheel Align’ Req’ if height altered
S1 / E2 368~240
Adj’ Torsion Bar front Leaf spring rear
Fr:Raised 20~30mm Rr:Raised 30~40mm
1987~2005
Chassis bracket 32012* *Required on models 02/99 onward
1 Kit
60250 Raised Leaf E1 / E2 630~380
Courier Raised height Cargo 60641* * Top mount to chassis reinforcing bracket required on models 02/99 onward
Adj’ Torsion Bar
Wheel Align’ Req’ if height altered
S1 / E2 368~240
Adj’ Torsion Bar front Leaf spring rear
Fr:Raised 20~30mm Rr:Raised 30~40mm
1987~2005
Chassis bracket 32012* *Required on models 02/99 onward
1 Kit
60251 Raised Leaf E1 / E2 630~380
-
4x4 Suspension Front Rear
MAKE & MODEL
YEAR
Shock Absorber
Spring Type
Shock Mount Open~ Closed
Shock
Absorber
Spring Type
Shock Mount Open~ Closed
Copyright: All rights reserved. No part of this catalogue may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without permission in writing from OzTec Suspension. ABN 16101241267 Page 8 § = Part number still in development. � = Old reference number - while stocks last.
Ford continued F100 (1/2 Ton) Standard height Leaf spring front Leaf spring rear
1977~1979
60775 Original Leaf S1 / E2 495~305 60145 Comfort 60146 Cargo
Original Leaf S1 / E2 615~365
F100 Standard height (Twin shock front suspension) Coil spring front Leaf spring rear
1980~1992
60701 Original Coil S1 / E2 398~262 50062 Original Leaf E1 / E2 585~353
F100 Standard height (Quad shock front suspension) 60701 Behind axle
S1 / E2 398~262
Coil spring front Leaf spring rear
1980~1993
50260 Forward of axle
Original Coil
S1 / E1 491~304
50062 Original Leaf E1 / E2 585~353
F150 (1/2 Ton) Standard height Leaf spring front Leaf spring rear
1977~1979
60775 Original Leaf S1 / E2 495~305 60145 Comfort 60146 Cargo
Original Leaf S1 / E2 615~365
F150 Standard height (Twin shock front suspension) Coil spring front Leaf spring rear
1980~1992
60701 Original Coil S1 / E2 398~262 50062 Original Leaf E1 / E2 585~353
F150 Standard height (Quad shock front suspension) 60701 Behind axle
S1 / E2 398~262
Coil spring front Leaf spring rear
1980~1993
50260 Forward of axle
Original Coil
S1 / E1 491~304
50062 Original Leaf E1 / E2 585~353
F250 Standard height (Quad shock rear suspension) 50726 Outside of Chassis Rail
E1 / E2 700~420
Leaf spring front Leaf spring rear
2001~ 50062 Original Equip E1 / E2 585~353
60257 Inside of Chassis Rail
Original Leaf
E1 / E2 765~482
-
4x4 Suspension Front Rear
MAKE & MODEL
YEAR
Shock Absorber
Spring Type
Shock Mount Open~ Closed
Shock
Absorber
Spring Type
Shock Mount Open~ Closed
Copyright: All rights reserved. No part of this catalogue may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without permission in writing from OzTec Suspension. ABN 16101241267 Page 9 § = Part number still in development. � = Old reference number - while stocks last.
Ford continuedMaverick Y60 SWB 2 Door Wagon Raised height Comfort
60301* *When fitting this long travel shock with any spring it is the installers responsibility to ensure the springs are trapped.
Raised Coil S2 / S2 520~320
40031 ~8/89
E2 / E1 577~346
Coil spring front Coil spring rear
4.2 Litre Petrol or Diesel: Alloy Bull bar No heavy accessories Raised 40~50mm
1988~2/94
Steering Damper
40041 9/89~
S1 / S1 486~291
60221* *When fitting this long travel shock with any spring it is the installers responsibility to ensure the springs are trapped.
Raised Coil E1 / E1 630~380
Maverick Y60 SWB 2 Door Wagon Raised height Cargo 60302* *When fitting this long travel shock with any spring it is the installers responsibility to ensure the springs are trapped.
Raised Coil S2 / S2 520~320
40031 ~8/89
E2 / E1 577~346
Coil spring front Coil spring rear
4.2 Litre Petrol or Diesel: Steel Bull bar & Winch. Towing, roof rack. Constant heavy load. Raised 40~50mm
1988~2/94
Steering Damper
40041 9/89~
S1 / S1 486~291
60221* *When fitting this long travel shock with any spring it is the installers responsibility to ensure the springs are trapped.
Raised Coil E1 / E1 630~380
Maverick Y60 LWB 4 Door Wagon Raised height Comfort 60301* *When fitting this long travel shock with any spring it is the installers responsibility to ensure the springs are trapped.
Raised Coil S2 / S2 520~320
40031 ~8/89
E2 / E1 577~346
Coil spring front Coil spring rear
4.2 Litre Petrol or Diesel: Alloy Bull bar No heavy accessories Raised 40~50mm
1988~2/94
Steering Damper
40041 9/89~
S1 / S1 486~291
60340* *When fitting this long travel shock with any spring it is the installers responsibility to ensure the springs are trapped.
Raised Coil E1 / E1 664~407
-
4x4 Suspension Front Rear
MAKE & MODEL
YEAR
Shock Absorber
Spring Type
Shock Mount Open~ Closed
Shock
Absorber
Spring Type
Shock Mount Open~ Closed
Copyright: All rights reserved. No part of this catalogue may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without permission in writing from OzTec Suspension. ABN 16101241267 Page 10 § = Part number still in development. � = Old reference number - while stocks last.
Ford continued Maverick Y60 LWB 4 Door Wagon Raised height Cargo
60302* *When fitting this long travel shock with any spring it is the installers responsibility to ensure the springs are trapped.
Raised Coil S2 / S2 520~320
40031 ~8/89
E2 / E1 577~346
Coil spring front Coil spring rear
4.2 Litre Petrol or Diesel: Steel Bull bar & Winch. Towing, roof rack. Constant heavy load. Raised 40~50mm
1988~2/94
Steering Damper
40041 9/89~
S1 / S1 486~291
60311* *When fitting this long travel shock with any spring it is the installers responsibility to ensure the springs are trapped.
Raised Coil E1 / E1 664~407
Maverick Y60 LWB 4 Door Wagon Raised 100mm (4”) *May not be legal for road use*
60902* *When fitting this long travel shock with any spring it is the installers responsibility to ensure the springs are trapped.
Raised Coil +100mm
S2 / S2 560~340
40031 ~8/89
E2 / E1 577~346
Coil spring front Coil spring rear
4.2 Litre Petrol or Diesel: Raised 100mm** For extreme off road use only May require modification to brake hoses, diff breathers etc All responsibility rests with vehicle owner/operator.
1988~2/94
Steering Damper
40041 9/89~
S1 / S1 486~291
60911* *When fitting this long travel shock with any spring it is the installers responsibility to ensure the springs are trapped.
Raised Coil +100mm
E1 / E1 720~450
Maverick Y60 Coil Cab Chassis Raised height Comfort 60301* *When fitting this long travel shock with any spring it is the installers responsibility to ensure the springs are trapped.
Raised Coil S2 / S2 520~320
40031 ~8/89
E2 / E1 577~346
Coil spring front Coil spring rear
4.2 Litre Petrol or Diesel: Alloy Bull bar No heavy accessories Raised 40~50mm
1988~1997
Steering Damper
40041 9/89~
S1 / S1 486~291
60340* *When fitting this long travel shock with any spring it is the installers responsibility to ensure the springs are trapped.
Raised Coil E1 / E1 664~407
-
4x4 Suspension Front Rear
MAKE & MODEL
YEAR
Shock Absorber
Spring Type
Shock Mount Open~ Closed
Shock
Absorber
Spring Type
Shock Mount Open~ Closed
Copyright: All rights reserved. No part of this catalogue may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without permission in writing from OzTec Suspension. ABN 16101241267 Page 11 § = Part number still in development. � = Old reference number - while stocks last.
Ford continued Maverick Y60 Coil Cab Chassis Raised height Cargo
60302* *When fitting this long travel shock with any spring it is the installers responsibility to ensure the springs are trapped.
Raised Coil S2 / S2 520~320
40031 ~8/89
E2 / E1 577~346
Coil spring front Coil spring rear
4.2 Litre Petrol or Diesel: Bull bar & Winch. Towing. Constant heavy load. Raised 40~50mm
1988~1997
Steering Damper
40041 9/89~
S1 / S1 486~291
60311* *When fitting this long travel shock with any spring it is the installers responsibility to ensure the springs are trapped.
Raised Coil E1 / E1 664~407
Maverick Y60 Coil Cab Chassis Raised 100mm (4”) *May not be legal for road use* 60902* *When fitting this long travel shock with any spring it is the installers responsibility to ensure the springs are trapped.
Raised Coil +100mm
S2 / S2 560~340
40031 ~8/89
E2 / E1 577~346
Coil spring front Coil spring rear
4.2 Litre Petrol or Diesel: Raised 100mm** For extreme off road use only
1988~1997
Steering Damper
40041 9/89~
S1 / S1 486~291
60911* *When fitting this long travel shock with any spring it is the installers responsibility to ensure the springs are trapped.
Raised Coil +100mm
E1 / E1 720~450
Maverick Y60 Leaf Cab Chassis Standard height All60781 Original Leaf S1 / E1 495~305
40031 ~8/89
E2 / E1 577~346
Leaf spring front Leaf spring rear
4.2 Litre Petrol or Diesel: Standard height
1988~2/94
Steering Damper
40041 9/89~
S1 / S1 486~291
60351 Original Leaf E1 / S1 655~391
Maverick Y60 Leaf Cab Chassis Raised height All60121* *Anti inversion shackle required with this P/No
Raised Leaf S1 / E1 550~335
40031 ~8/89
E2 / E1 577~346
Leaf spring front Leaf spring rear
4.2 Litre Petrol or Diesel: Raised 40mm approx’
1988~2/94
Steering Damper
40041 9/89~
S1 / S1 486~291
60351 Raised Leaf E1 / S1 655~391
-
4x4 Suspension Front Rear
MAKE & MODEL
YEAR
Shock Absorber
Spring Type
Shock Mount Open~ Closed
Shock
Absorber
Spring Type
Shock Mount Open~ Closed
Copyright: All rights reserved. No part of this catalogue may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without permission in writing from OzTec Suspension. ABN 16101241267 Page 12 § = Part number still in development. � = Old reference number - while stocks last.
Ford continuedRaider 4 Door Wagon Standard height Comfort Adj’ Torsion Bar front Leaf spring rear
Standard height.
1991~1997
60641 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 368~240 60250 Original Leaf
E1 / E2 630~380
Raider 4 Door Wagon Standard height Cargo Adj’ Torsion Bar front Leaf spring rear
Standard height.
1991~1997
60641 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 368~240 60251 Original Leaf
E1 / E2 630~380
Raider 4 Door Wagon Raised height Comfort Adj’ Torsion Bar front Leaf spring rear
Fr. Raised 20~30mm Rr. Raised 40~50mm
1991~1997
60641 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 368~240 60250 Raised Leaf
E1 / E2 630~380
Raider 4 Door Wagon Raised height Cargo Adj’ Torsion Bar front Leaf spring rear
Fr. Raised 20~30mm Rr. Raised 40~50mm
1991~1997
60641 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 368~240 60251 Raised Leaf
E1 / E2 630~380
-
4x4 Suspension Front Rear
MAKE & MODEL
YEAR
Shock Absorber
Spring Type
Shock Mount Open~ Closed
Shock
Absorber
Spring Type
Shock Mount Open~ Closed
Copyright: All rights reserved. No part of this catalogue may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without permission in writing from OzTec Suspension. ABN 16101241267 Page 13 § = Part number still in development. � = Old reference number - while stocks last.
Ford continuedRanger Standard height Comfort
60641*
* Top mount to chassis reinforcing bracket required on all models when fitting heavy duty shock absorbers
Adj’ Torsion Bar
Wheel Align’ Req’ if height altered
S1 / E2 368~240
Adj’ Torsion Bar front Leaf spring rear Standard height
2006~2010
Chassis bracket 32012 1 Kit
60250 Original Leaf E1/ E2 630~380
Ranger Standard height Cargo 60641*
* Top mount to chassis reinforcing bracket required on all models when fitting heavy duty shock absorbers
Adj’ Torsion Bar
Wheel Align’ Req’ if height altered
S1 / E2 368~240
Adj’ Torsion Bar front Leaf spring rear Standard height
2006~2010
Chassis bracket 32012 1 Kit
60251 Original Leaf E1/ E2 630~380
Ranger Raised height Comfort 60641*
* Top mount to chassis reinforcing bracket required on all models when fitting heavy duty shock absorbers
Adj’ Torsion Bar
Wheel Align’ Req’ if height altered
S1 / E2 368~240
Adj’ Torsion Bar front Leaf spring rear Fr:Raised 20~30mm Rr:Raised 30~40mm
2006~2010
Chassis bracket 32012 1 Kit
60250 Raised Leaf E1/ E2 630~380
Ranger Raised height Cargo 60641*
* Top mount to chassis reinforcing bracket required on all models when fitting heavy duty shock absorbers
Adj’ Torsion Bar
Wheel Align’ Req’ if height altered
S1 / E2 368~240
Adj’ Torsion Bar front Leaf spring rear Fr:Raised 20~30mm Rr:Raised 30~40mm
2006~2010
Chassis bracket 32012 1 Kit
60251 Raised Leaf E1/ E2 630~380
-
4x4 Suspension Front Rear
MAKE & MODEL
YEAR
Shock Absorber
Spring Type
Shock Mount Open~ Closed
Shock
Absorber
Spring Type
Shock Mount Open~ Closed
Copyright: All rights reserved. No part of this catalogue may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without permission in writing from OzTec Suspension. ABN 16101241267 Page 14 § = Part number still in development. � = Old reference number - while stocks last.
Great Wall X240 4 Door Wagon Standard height Comfort Adj’ Torsion Bar front Coil spring rear
Fr. Standard Hgt Rr. Standard Hgt
2010~ 60691 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 398~262 50282 Original Coil
S1 / E2 515~325
X240 4 Door Wagon Raised height Comfort Adj’ Torsion Bar front Coil spring rear
Fr. Raised 20~30mm Rr. Raised 20~30mm
2010~ 60691 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 398~262 50282 Raised Coil
S1 / E2 515~325
-
4x4 Suspension Front Rear
MAKE & MODEL
YEAR
Shock Absorber
Spring Type
Shock Mount Open~ Closed
Shock
Absorber
Spring Type
Shock Mount Open~ Closed
Copyright: All rights reserved. No part of this catalogue may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without permission in writing from OzTec Suspension. ABN 16101241267 Page 15§ = Part number still in development. � = Old reference number - while stocks last.
Holden Colorado Standard height ComfortAdj’ Torsion Bar Front Leaf Rear
Standard height
2008~ 60691 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 398~262 60330 Original Leaf
E1 / E1 560~340
Colorado Standard height CargoAdj’ Torsion Bar Front Leaf Rear
Standard height
2008~ 60691 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 398~262 60332 Original Leaf
E1 / E1 560~340
Colorado Raised height ComfortAdj’ Torsion Bar Front Leaf Rear
Fr. Raised 20~30mm Rr. Raised 40~50mm
2008~ 60691 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 398~262 60060B Raised Leaf
E1 / E1 595~363
Colorado Raised height CargoAdj’ Torsion Bar Front Leaf Rear
Fr. Raised 20~30mm Rr. Raised 40~50mm
2008~ 60691 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 398~262 60061B Raised Leaf
E1 / E1 595~363
Frontera 2 Door 4 Cylinder Standard height ComfortAdj’ Torsion Bar front Coil Rear
Standard height
1995~1999
50041 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 398~262 50202 Original Coil
E2 / E1 495~312
-
4x4 Suspension Front Rear
MAKE & MODEL
YEAR
Shock Absorber
Spring Type
Shock Mount Open~ Closed
Shock
Absorber
Spring Type
Shock Mount Open~ Closed
Copyright: All rights reserved. No part of this catalogue may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without permission in writing from OzTec Suspension. ABN 16101241267 Page 16§ = Part number still in development. � = Old reference number - while stocks last.
Holden continuedFrontera 2 Door 4 Cylinder Raised height ComfortAdj’ Torsion Bar front Coil Rear
Fr. Raised 20~30mm Rr. Raised 30~40mm
1995~1999
50041 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 398~262 50202 Raised Coil
E2 / E1 495~312
Frontera 4 Door V6 Standard height ComfortAdj’ Torsion Bar front Coil Rear
Standard height
1999~2004
50041 Adj’ Torsion Bar
Wheel Align’ Req’ if height altered
S1 / E2 398~262 50250
Original Coil S1 / E2
491~304
Frontera 4 Door V6 Raised height ComfortAdj’ Torsion Bar front Coil Rear
Fr. Raised 20~30mm Rr. Raised 30~40mm
1999~2004
50041 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 398~262 50250
Raised Coil S1 / E2
491~304
Jackaroo UBS13,UBS16 Standard height ComfortAdj’ Torsion Bar front Leaf Rear
Standard height
1981~10/86
50031 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 344~226 60060B Original Leaf
E1 / E1 595~363
Jackaroo UBS13,UBS16 Standard height CargoAdj’ Torsion Bar front Leaf Rear
Standard height
1981~10/86
50031 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 344~226 60061B Original Leaf
E1 / E1 595~363
-
4x4 Suspension Front Rear
MAKE & MODEL
YEAR
Shock Absorber
Spring Type
Shock Mount Open~ Closed
Shock
Absorber
Spring Type
Shock Mount Open~ Closed
Copyright: All rights reserved. No part of this catalogue may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without permission in writing from OzTec Suspension. ABN 16101241267 Page 17§ = Part number still in development. � = Old reference number - while stocks last.
Holden continued Jackaroo UBS13,UBS16 Raised height ComfortAdj’ Torsion Bar front Leaf Rear
Fr. Raised 20~30mm Rr. Raised 40~50mm
1981~10/86
50031 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 344~226 60060B Raised Leaf
E1 / E1 595~363
Jackaroo UBS13,UBS16 Raised height CargoAdj’ Torsion Bar front Leaf Rear
Fr. Raised 20~30mm Rr. Raised 40~50mm
1981~10/86
50031 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 344~226 60061B Raised Leaf
E1 / E1 595~363
Jackaroo UBS17,UBS55 Standard height AllAdj’ Torsion Bar front Leaf Rear
Standard height
11/86~03/92
50031 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 344~226 51290 Original Leaf
S1 / E1 630~360
Jackaroo UBS17,UBS55 Raised height AllAdj’ Torsion Bar front Leaf Rear
Fr. Raised 20~30mm Rr. Raised 40~50mm
11/86~03/92
50031 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 344~226 51290 Raised Leaf
S1 / E1 630~360
-
4x4 Suspension Front Rear
MAKE & MODEL
YEAR
Shock Absorber
Spring Type
Shock Mount Open~ Closed
Shock
Absorber
Spring Type
Shock Mount Open~ Closed
Copyright: All rights reserved. No part of this catalogue may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without permission in writing from OzTec Suspension. ABN 16101241267 Page 18§ = Part number still in development. � = Old reference number - while stocks last.
Holden continuedJackaroo Inc Monterey UBS69 Standard heightAdj’ Torsion Bar front Coil Rear
Standard height
04/92~2004
60691 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 398~262 60101
Original Coil E2 / E1
510~318
Jackaroo Inc Monterey UBS69 Raised heightAdj’ Torsion Bar front Coil Rear
Fr. Raised 20~30mm Rr. Raised 40~50mm
04/92~2004
60691 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 398~262 60101 Raised Coil
E2 / E1 510~318
Rodeo KB40,KBD40 Standard height ComfortAdj’ Torsion Bar front Leaf Rear
Standard height
1979~1980
50031 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 344~226 60060B Original Leaf
E1 / E1 595~363
Rodeo KB40,KBD40 Standard height CargoAdj’ Torsion Bar front Leaf Rear
Standard height
1979~1980
50031 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 344~226 60061B
Original Leaf E1 / E1
595~363
Rodeo KB40,KBD40 Raised height ComfortAdj’ Torsion Bar front Leaf Rear
Fr. Raised 20~30mm Rr. Raised 40~50mm
1979~1980
50031 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 344~226 60060B
Raised Leaf E1 / E1
595~363
-
4x4 Suspension Front Rear
MAKE & MODEL
YEAR
Shock Absorber
Spring Type
Shock Mount Open~ Closed
Shock
Absorber
Spring Type
Shock Mount Open~ Closed
Copyright: All rights reserved. No part of this catalogue may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without permission in writing from OzTec Suspension. ABN 16101241267 Page 19§ = Part number still in development. � = Old reference number - while stocks last.
Holden continuedRodeo KB40,KBD40 Raised height CargoAdj’ Torsion Bar front Leaf Rear
Fr. Raised 20~30mm Rr. Raised 40~50mm
1979~1980
50031 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 344~226 60061B Raised Leaf
E1 / E1 595~363
Rodeo KB28,KB41~ Standard height ComfortAdj’ Torsion Bar Front Leaf Rear
Standard height
1980~07/88
50031 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 344~226 60060B Original Leaf
E1 / E1 595~363
Rodeo KB28,KB41~ Standard height CargoAdj’ Torsion Bar Front Leaf Rear
Standard height
1980~07/88
50031 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 344~226 60061B Original Leaf
E1 / E1 595~363
Rodeo KB28,KB41~ Raised height ComfortAdj’ Torsion Bar Front Leaf Rear
Fr. Raised 20~30mm Rr. Raised 40~50mm
1980~07/88
50031 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 344~226 60060B Raised Leaf
E1 / E1 595~363
Rodeo KB28,KB41~ Raised height CargoAdj’ Torsion Bar Front Leaf Rear
Fr. Raised 20~30mm Rr. Raised 40~50mm
1980~07/88
50031 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 344~226 60061B Raised Leaf
E1 / E1 595~363
-
4x4 Suspension Front Rear
MAKE & MODEL
YEAR
Shock Absorber
Spring Type
Shock Mount Open~ Closed
Shock
Absorber
Spring Type
Shock Mount Open~ Closed
Copyright: All rights reserved. No part of this catalogue may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without permission in writing from OzTec Suspension. ABN 16101241267 Page 20§ = Part number still in development. � = Old reference number - while stocks last.
Holden continuedRodeo TFS & R7,R9 Standard height ComfortAdj’ Torsion Bar Front Leaf Rear
Standard height
08/88~02/03
50041* * Can use 60mm body option if clearance allows. Check clearance at outer tie rod before fitting.
60691
Adj’ Torsion Bar
Wheel Align’ Req’ if height altered
S1 / E2 398~262 60060B Original Leaf
E1 / E1 595~363
Rodeo TFS & R7,R9 Standard height CargoAdj’ Torsion Bar Front Leaf Rear
Standard height
08/88~02/03
50041* * Can use 60mm body option if clearance allows. Check clearance at outer tie rod before fitting.
60691
Adj’ Torsion Bar
Wheel Align’ Req’ if height altered
S1 / E2 398~262 60061B
Original Leaf E1 / E1
595~363
Rodeo TFS & R7,R9 Raised height ComfortAdj’ Torsion Bar Front Leaf Rear
Fr. Raised 20~30mm Rr. Raised 40~50mm
08/88~02/03
50041* * Can use 60mm body option if clearance allows. Check clearance at outer tie rod before fitting.
60691
Adj’ Torsion Bar
Wheel Align’ Req’ if height altered
S1 / E2 398~262 60060B Raised Leaf
E1 / E1 595~363
Rodeo TFS & R7,R9 Raised height CargoAdj’ Torsion Bar Front Leaf Rear
Fr. Raised 20~30mm Rr. Raised 40~50mm
08/88~02/03
50041* * Can use 60mm body option if clearance allows. Check clearance at outer tie rod before fitting.
60691
Adj’ Torsion Bar
Wheel Align’ Req’ if height altered
S1 / E2 398~262 60061B Raised Leaf
E1 / E1 595~363
-
4x4 Suspension Front Rear
MAKE & MODEL
YEAR
Shock Absorber
Spring Type
Shock Mount Open~ Closed
Shock
Absorber
Spring Type
Shock Mount Open~ Closed
Copyright: All rights reserved. No part of this catalogue may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without permission in writing from OzTec Suspension. ABN 16101241267 Page 21§ = Part number still in development. � = Old reference number - while stocks last.
Holden continuedRodeo RA Standard height ComfortAdj’ Torsion Bar Front Leaf Rear
Standard height
2003~2008
60691 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 398~262 60330 Original Leaf
E1 / E1 560~340
Rodeo RA Standard height CargoAdj’ Torsion Bar Front Leaf Rear
Standard height
2003~2008
60691 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 398~262 60332
Original Leaf E1 / E1
560~340
Rodeo RA Raised height ComfortAdj’ Torsion Bar Front Leaf Rear
Fr. Raised 20~30mm Rr. Raised 40~50mm
2003~2008
60691 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 398~262 60060B Raised Leaf
E1 / E1 595~363
Rodeo RA Raised height CargoAdj’ Torsion Bar Front Leaf Rear
Fr. Raised 20~30mm Rr. Raised 40~50mm
2003~2008
60691 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 398~262 60061B Raised Leaf
E1 / E1 595~363
-
4x4 Suspension Front Rear
MAKE & MODEL
YEAR
Shock Absorber
Spring Type
Shock Mount Open~ Closed
Shock
Absorber
Spring Type
Shock Mount Open~ Closed
Copyright: All rights reserved. No part of this catalogue may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without permission in writing from OzTec Suspension. ABN 16101241267 Page 22§ = Part number still in development. � = Old reference number - while stocks last.
Hyundai Terracan Standard height Comfort Adj’ Torsion Bar Front Coil Rear
Standard height
2002~ 50031 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 344~226 60122 Original Coil
S1 / E1 550~335
Terracan Raised height Comfort Adj’ Torsion Bar Front Coil Rear
Fr. Raised 20~30mm Rr. Raised 30~40mm
2002~ 50031 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 344~226 60122 Raised Coil
S1 / E1 550~335
Isuzu D-Max Standard height ComfortAdj’ Torsion Bar Front Leaf Rear
Standard height
2008~ 60691 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 398~262 60330
Original Leaf E1 / E1
560~340
D-Max Standard height CargoAdj’ Torsion Bar Front Leaf Rear
Standard height
2008~ 60691 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 398~262 60332
Original Leaf E1 / E1
560~340
-
4x4 Suspension Front Rear
MAKE & MODEL
YEAR
Shock Absorber
Spring Type
Shock Mount Open~ Closed
Shock
Absorber
Spring Type
Shock Mount Open~ Closed
Copyright: All rights reserved. No part of this catalogue may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without permission in writing from OzTec Suspension. ABN 16101241267 Page 23§ = Part number still in development. � = Old reference number - while stocks last.
Isuzu continued D-Max Raised height ComfortAdj’ Torsion Bar Front Leaf Rear
Fr. Raised 20~30mm Rr. Raised 40~50mm
2008~ 60691 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 398~262 60060B Raised Leaf
E1 / E1 595~363
D-Max Raised height CargoAdj’ Torsion Bar Front Leaf Rear
Fr. Raised 20~30mm Rr. Raised 40~50mm
2008~ 60691 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 398~262 60061B Raised Leaf
E1 / E1 595~363
MU (Mysterious Utility) UCS55WD~ Standard height or raisedAdj’ Torsion Bar Front Leaf Rear
Standard height & Raised with re-set rear O.E. springs
~1997 50031 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 344~226 60060B Original Leaf
E1 / E1 595~363
Land RoverCounty 110 Petrol Wagon Standard height Coil Spring Front Coil Spring Rear
110” Wheelbase
Standard height
1983~1991
60801 Original Coil S2 / S2 560~340 60811 Original Coil E1 / S2 560~340
-
4x4 Suspension Front Rear
MAKE & MODEL
YEAR
Shock Absorber
Spring Type
Shock Mount Open~ Closed
Shock
Absorber
Spring Type
Shock Mount Open~ Closed
Copyright: All rights reserved. No part of this catalogue may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without permission in writing from OzTec Suspension. ABN 16101241267 Page 24§ = Part number still in development. � = Old reference number - while stocks last.
Land Rover continuedCounty 110 Petrol Wagon Raised height Coil Spring Front Coil Spring Rear
110” Wheelbase
Raised 40~50mm
1983~1991
60801 Raised Coil S2 / S2 560~340 60811 Raised CoilE1 / S2 560~340
County 110 Diesel Wagon Standard height Coil Spring Front Coil Spring Rear
110” Wheelbase
Standard height
1983~1991
60801 Original Coil S2 / S2 560~340 60811 Original Coil E1 / S2 560~340
County 110 Diesel Wagon Raised height Coil Spring Front Coil Spring Rear
110” Wheelbase
Raised 40~50mm
1983~1991
60801 Raised Coil S2 / S2 560~340 60811
Raised Coil E1 / S2 560~340
County 110 Diesel Cab Chassis Standard heightCoil Spring Front Coil Spring Rear
110” Wheelbase
Standard height
1983~1991
60801 Original Coil S2 / S2 560~340 60811 Original Coil E1 / S2 560~340
-
4x4 Suspension Front Rear
MAKE & MODEL
YEAR
Shock Absorber
Spring Type
Shock Mount Open~ Closed
Shock
Absorber
Spring Type
Shock Mount Open~ Closed
Copyright: All rights reserved. No part of this catalogue may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without permission in writing from OzTec Suspension. ABN 16101241267 Page 25§ = Part number still in development. � = Old reference number - while stocks last.
Land Rover continuedCounty 110 Diesel Cab Chassis Raised heightCoil Spring Front Coil Spring Rear
110” Wheelbase
Raised 40~50mm
1983~1991
60801
Raised Coil S2 / S2 560~340 60811 Raised Coil
E1 / S2 560~340
Defender 110 Wagon Incl’ TD5 Standard heightCoil Spring Front Coil Spring Rear
110” Wheelbase
Standard height
1992~ 60801 Original Coil S2 / S2 560~340 60811 Original Coil E1 / S2 560~340
Defender 110 Wagon Incl’ TD5 Raised heightCoil Spring Front Coil Spring Rear
110” Wheelbase
Raised 40~50mm
1992~ 60801 Raised Coil S2 / S2 560~340 60811 Raised CoilE1 / S2 560~340
Defender 110 Cab Chassis Incl’ TD5 Standard heightCoil Spring Front Coil Spring Rear
110” Wheelbase
Standard height
1992~ 60801 Original Coil S2 / S2 560~340 60811 Original Coil E1 / S2 560~340
Defender 110 Cab Chassis Incl’ TD5 Raised heightCoil Spring Front Coil Spring Rear
110” Wheelbase
Raised 40~50mm
1992~ 60801 Raised Coil S2 / S2 560~340 60811 Raised CoilE1 / S2 560~340
-
4x4 Suspension Front Rear
MAKE & MODEL
YEAR
Shock Absorber
Spring Type
Shock Mount Open~ Closed
Shock
Absorber
Spring Type
Shock Mount Open~ Closed
Copyright: All rights reserved. No part of this catalogue may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without permission in writing from OzTec Suspension. ABN 16101241267 Page 26§ = Part number still in development. � = Old reference number - while stocks last.
Defender 130 Cab Chassis Incl’ TD5 Standard heightCoil Spring Front Coil Spring Rear
127” Wheelbase
Standard height
1993~1999
60801 Original Coil S2 / S2 560~340 60811 Original Coil E1 / S2 560~340
Defender 130 Cab Chassis Incl’ TD5 Raised height ComfortCoil Spring Front Coil Spring Rear
127” Wheelbase
Raised 40~50mm
1993~1999
60801 Raised Coil S2 / S2 560~340 60811 Raised CoilE1 / S2 560~340
Defender 130 Cab Chassis Incl’ TD5 Raised height CargoCoil Spring Front Coil Spring Rear
127” Wheelbase
Bull Bar & Winch Constant Heavy Load Raised 40~50mm
1993~1999
60801 Raised Coil S2 / S2 560~340 60811 Raised Coil E1 / S2 560~340
Discovery Series 1 including MA Standard height60801
Original Coil S2 / S2 560~340
Coil Springs Front Coil Springs Rear
Standard height
1989~07/99
Steering Damper 40051
S1 / S1 508~307
60811
Original Coil E1 / S2 560~340
Discovery Series 1 including MA Raised height60801
Raised Coil S2 / S2 560~340
Coil Springs Front Coil Springs Rear
Raised 40~50mm
1989~07/99
Steering Damper 40051
S1 / S1 508~307
60811
Raised Coil E1 / S2 560~340
-
4x4 Suspension Front Rear
MAKE & MODEL
YEAR
Shock Absorber
Spring Type
Shock Mount Open~ Closed
Shock
Absorber
Spring Type
Shock Mount Open~ Closed
Copyright: All rights reserved. No part of this catalogue may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without permission in writing from OzTec Suspension. ABN 16101241267 Page 27§ = Part number still in development. � = Old reference number - while stocks last.
Land Rover continuedDiscovery Series 2 Standard heightCoil Springs Front Coil Springs Rear Including vehicles with “Active Cornering Control”
Standard height
08/99~ 60840 §
Original Coil E2 / E3 575~365 60841 §
Original Coil eye / eye
Discovery Series 2 Raised heightCoil Springs Front Coil Springs Rear Including vehicles with “Active Cornering Control”
Raised 40~50mm
08/99~ 60840 §
Raised Spring E2 / E3 60841 §
Raised Spring eye / eye
Discovery Series 2 (Air Springs rear) Standard heightCoil Springs Front Air Springs Rear Including vehicles with “Active Cornering Control”
Standard height
08/99~ 60840 §
Original Coil E2 / E3 575~365 60841 §
Original Equip Air Bellows
eye / eye
-
4x4 Suspension Front Rear
MAKE & MODEL
YEAR
Shock Absorber
Spring Type
Shock Mount Open~ Closed
Shock
Absorber
Spring Type
Shock Mount Open~ Closed
Copyright: All rights reserved. No part of this catalogue may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without permission in writing from OzTec Suspension. ABN 16101241267 Page 28§ = Part number still in development. � = Old reference number - while stocks last.
Land Rover continued Range Rover Series 1 Standard height
60801
Original Coil S2 / S2 560~340
2&4 Door Coil Springs Front Coil Springs Rear
Standard height
1970~05/95
Steering Damper 40051
S1 / S1 508~307
60811
Original Coil E1 / S2 560~340
Range Rover Series 1 Raised height All60801
Raised Coil S2 / S2 560~340
2&4 Door Coil Springs Front Coil Springs Rear
Raised 40~50mm
1970~05/95
Steering Damper 40051
S1 / S1 508~307
60811
Raised Coil E1 / S2 560~340
Range Rover Series 1 Classic (Air Springs) Standard height60801
Original Equip Air Bellows
S2 / S2 560~340Classic 3.9 Litre V8
Air Suspension
10/92~05/95
Steering Damper 40051
S1 / S1 508~307
60811
Original Equip Air Bellows
E1 / S2 560~340
Range Rover Series 2 (Air Springs) Standard height4.0 & 4.6 Litre HSE Air Suspension
05/95~2001
60860 §
Original Equip Air Bellows
eye / eye 60861 §
Original Equip Air Bellows
eye / eye
-
4x4 Suspension Front Rear
MAKE & MODEL
YEAR
Shock Absorber
Spring Type
Shock Mount Open~ Closed
Shock
Absorber
Spring Type
Shock Mount Open~ Closed
Copyright: All rights reserved. No part of this catalogue may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without permission in writing from OzTec Suspension. ABN 16101241267 Page 29§ = Part number still in development. � = Old reference number - while stocks last.
Mazda Bravo B2500,2600 Standard height Comfort
60641* * Top mount to chassis reinforcing bracket required on models 02/99 onward
Adj’ Torsion Bar
Wheel Align’ Req’ if height altered
S1 / E2 368~240
Adj’ Torsion Bar front Leaf spring rear
Standard height
1987~2006
Chassis bracket* *Required on models 02/99 onward
32012**Required on models 02/99 onward
1 Kit Per Vehicle
60250 Original Leaf E1/ E2 630~380
Bravo B2500,2600 Standard height Cargo 60641* * Top mount to chassis reinforcing bracket required on models 02/99 onward
Adj’ Torsion Bar
Wheel Align’ Req’ if height altered
S1 / E2 368~240
Adj’ Torsion Bar front Leaf spring rear
Standard height
1987~2006
Chassis bracket* *Required on models 02/99 onward
32012**Required on models 02/99 onward
1 Kit Per Vehicle
60251 Original Leaf E1/ E2 630~380
Bravo B2500,2600 Raised height Comfort 60641* * Top mount to chassis reinforcing bracket required on models 02/99 onward
Adj’ Torsion Bar
Wheel Align’ Req’ if height altered
S1 / E2 368~240
Adj’ Torsion Bar front Leaf spring rear
Fr:Raised 20~30mm Rr:Raised 30~40mm
1987~2006
Chassis bracket* *Required on models 02/99 onward
32012**Required on models 02/99 onward
1 Kit Per Vehicle
60250 Raised Leaf E1/ E2 630~380
Bravo B2500,2600 Raised height Cargo 60641* * Top mount to chassis reinforcing bracket required on models 02/99 onward
Adj’ Torsion Bar
Wheel Align’ Req’ if height altered
S1 / E2 368~240
Adj’ Torsion Bar front Leaf spring rear
Fr:Raised 20~30mm Rr:Raised 30~40mm
1987~2006
Chassis bracket* *Required on models 02/99 onward
32012**Required on models 02/99 onward
1 Kit Per Vehicle
60251 Raised Leaf E1/ E2 630~380
-
4x4 Suspension Front Rear
MAKE & MODEL
YEAR
Shock Absorber
Spring Type
Shock Mount Open~ Closed
Shock
Absorber
Spring Type
Shock Mount Open~ Closed
Copyright: All rights reserved. No part of this catalogue may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without permission in writing from OzTec Suspension. ABN 16101241267 Page 30§ = Part number still in development. � = Old reference number - while stocks last.
Mazda continued BT50 Standard height Comfort
60641* * Top mount to chassis reinforcing bracket required on all models when fitting heavy duty shock absorbers
Adj’ Torsion Bar
Wheel Align’ Req’ if height altered
S1 / E2 368~240
Adj’ Torsion Bar front Leaf spring rear
Standard height
2006~
Chassis bracket 32012 1 Kit Per Vehicle
60250 Original Leaf E1/ E2 630~380
BT50 Standard height Cargo 60641* * Top mount to chassis reinforcing bracket required on all models when fitting heavy duty shock absorbers
Adj’ Torsion Bar
Wheel Align’ Req’ if height altered
S1 / E2 368~240
Adj’ Torsion Bar front Leaf spring rear
Standard height
2006~
Chassis bracket 32012 1 Kit Per Vehicle
60251 Original Leaf E1/ E2 630~380
BT50 Raised height Comfort 60641* * Top mount to chassis reinforcing bracket required on all models when fitting heavy duty shock absorbers
Adj’ Torsion Bar
Wheel Align’ Req’ if height altered
S1 / E2 368~240
Adj’ Torsion Bar front Leaf spring rear
Fr:Raised 20~30mm Rr:Raised 30~40mm
2006~
Chassis bracket 32012 1 Kit Per Vehicle
60250 Raised Leaf E1/ E2 630~380
BT50 Raised height Cargo 60641* * Top mount to chassis reinforcing bracket required on all models when fitting heavy duty shock absorbers
Adj’ Torsion Bar
Wheel Align’ Req’ if height altered
S1 / E2 368~240
Adj’ Torsion Bar front Leaf spring rear
Fr:Raised 20~30mm Rr:Raised 30~40mm
2006~
Chassis bracket 32012 1 Kit Per Vehicle
60251 Raised Leaf E1/ E2 630~380
-
4x4 Suspension Front Rear
MAKE & MODEL
YEAR
Shock Absorber
Spring Type
Shock Mount Open~ Closed
Shock
Absorber
Spring Type
Shock Mount Open~ Closed
Copyright: All rights reserved. No part of this catalogue may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without permission in writing from OzTec Suspension. ABN 16101241267 Page 31§ = Part number still in development. � = Old reference number - while stocks last.
Mitsubishi Challenger (Series 1) Standard height Comfort Adj’ Torsion Bar front Leaf spring rear
Standard height
1998~07/00
60671 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 344~226 50110 Original Leaf
E1 / E1 520~318
Challenger (Series 1) Standard height Cargo Adj’ Torsion Bar front Leaf spring rear
Standard height
1998~07/00
60671 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 344~226 60100 Original Leaf
E1 / E1 520~325
Challenger (Series 1) Raised height Comfort Adj’ Torsion Bar front Leaf spring rear
Fr:Raised 20~30mm Rr:Raised 30~40mm
1998~07/00
60671 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 344~226 60330 Raised Leaf
E1 / E1 560~340
Challenger (Series 1) Raised height Cargo Adj’ Torsion Bar front Leaf spring rear
Fr:Raised 20~30mm Rr:Raised 30~40mm
1998~07/00
60671 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 344~226 60332 Raised Leaf
E1 / E1 560~340
Challenger (Series 2) Standard height All Adj’ Torsion Bar front Coil spring rear
Standard height
07/00~2005
60671 Adj’ Torsion Bar
Wheel Align’ Req’ if height altered
S1 / E2 344~226 60090 Original Coil
E1 / E2 525~333
-
4x4 Suspension Front Rear
MAKE & MODEL
YEAR
Shock Absorber
Spring Type
Shock Mount Open~ Closed
Shock
Absorber
Spring Type
Shock Mount Open~ Closed
Copyright: All rights reserved. No part of this catalogue may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without permission in writing from OzTec Suspension. ABN 16101241267 Page 32§ = Part number still in development. � = Old reference number - while stocks last.
Mitsubishi continued Challenger (Series 2) Raised height All Adj’ Torsion Bar front, Coil spring rear
Fr:Raised 20~30mm Rr:Raised 30~40mm
07/00~2005
60671 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 344~226 60090 Raised Coil
E1 / E2 525~333
Delica Van(L300) (Second hand import) L35G, L037G Standard height Comfort Adj’ Torsion Bar front Leaf spring rear
Standard height
1983~05/86
60661 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E3 344~226 60330 Original Leaf
E1 / E1 560~340
Delica Van (L300) (Second hand import) L35G, L037G Standard height Cargo Adj’ Torsion Bar front Leaf spring rear
Standard height
1983~05/86
60661 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E3 344~226 60332 Original Leaf
E1 / E1 560~340
Delica Van (L300) (Second hand import) L35G, L037G Raised height Comfort Adj’ Torsion Bar front Leaf spring rear
Fr:Raised 20~30mm Rr:Raised 30~40mm
1983~05/86
60661 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E3 344~226 60060B Raised Leaf
E1 / E1 595~363
-
4x4 Suspension Front Rear
MAKE & MODEL
YEAR
Shock Absorber
Spring Type
Shock Mount Open~ Closed
Shock
Absorber
Spring Type
Shock Mount Open~ Closed
Copyright: All rights reserved. No part of this catalogue may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without permission in writing from OzTec Suspension. ABN 16101241267 Page 33§ = Part number still in development. � = Old reference number - while stocks last.
Mitsubishi continuedDelica Van (L300) (Second hand import) L35G, L037G Raised height Cargo Adj’ Torsion Bar front Leaf spring rear
Fr:Raised 20~30mm Rr:Raised 30~40mm
1983~05/86
60661 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E3 344~226 60061B Raised Leaf
E1 / E1 595~363
Delica Van (L300) (Second hand import) P2#W/V, P35W, P45V Standard height Adj’ Torsion Bar front Leaf spring rear
Standard height
06/86~06/94
60661 Adj’ Torsion Bar Original Equip’
Wheel Align’ Req’ if height altered
S1 / E3 344~226 60094 Original Leaf
E1 / S1 485~305
Delica Van (L400) (S/H’ import) PD4, PD5 Std Height: Models Without Electric ADJ shocks Adj’ Torsion Bar frontCoil spring rear
Standard height
06/94~ 60671 Adj’ Torsion Bar
Wheel Align’ Req’ if height altered
S1 / E2 344~226 60205
Original Coil E1 / E1 630~380
Delica Van (L400) (S/H’ import) PD4, PD5 Std Height: Models With Electric ADJ shocks Adj’ Torsion Bar frontCoil spring rear
Standard height
06/94~ 60671 �
Adj’ Torsion Bar
Wheel Align’ Req’ if height altered
S1 / E2 344~226 60026 �
Original Coil S1 / E2 615~363
� Note: This shock absorber is not adjustable but can be used to replace original electronically adjustable shock absorber
Delica Van (L400) (S/H’ import) PD4,PD5 Raised Height: Models Without Electric ADJ shocks Adj’ Torsion Bar frontCoil spring rear
Raised 40~50mm
06/94~ 60671
Adj’ Torsion Bar
Original Equip’
Wheel Align’ Req’ if height altered
S1 / E2 344~226 60205
Raised Coil E1 / E1 630~380
-
4x4 Suspension Front Rear
MAKE & MODEL
YEAR
Shock Absorber
Spring Type
Shock Mount Open~ Closed
Shock
Absorber
Spring Type
Shock Mount Open~ Closed
Copyright: All rights reserved. No part of this catalogue may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without permission in writing from OzTec Suspension. ABN 16101241267 Page 34§ = Part number still in development. � = Old reference number - while stocks last.
Mitsubishi continued Delica Van (L400) (S/H’ import) PD4,PD5 Rsd Height: Models With Electric ADJ shocks Adj’ Torsion Bar frontCoil spring rear
Raised 40~50mm
06/94~ 60671 �
Adj’ Torsion Bar
Wheel Align’ Req’ if height altered
S1 / E2 344~226 60026 �
Raised Coil S4 / E2 615~363
� Note: This shock absorber is not adjustable but can be used to replace original electronically adjustable shock absorber
L200 Ute MA, MB, MC, MD Standard height Comfort Adj’ Torsion Bar front Leaf spring rear
Standard height
1981~1987
60661 Adj’ Torsion Bar
Wheel Align’ Req’ if height altered
S1 / E3 344~226 60330 Original Leaf
E1 / E1 560~340
L200 Ute MA, MB, MC, MD Standard height Cargo Adj’ Torsion Bar front Leaf spring rear
Standard height
1981~1987
60661 Adj’ Torsion Bar
Wheel Align’ Req’ if height altered
S1 / E3 344~226 60332 Original Leaf
E1 / E1 560~340
L300 Van SA, SB, SC, SD, SE Standard height Comfort Adj’ Torsion Bar front Leaf spring rear
Standard height
1983~10/86
60661 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E3 344~226 50110 Original Leaf
E1 / E1 520~318
L300 Van SA, SB, SC, SD, SE Standard height Cargo Adj’ Torsion Bar front Leaf spring rear
Standard height
1983~10/86
60661 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E3 344~226 60100 Original Leaf
E1 / E1 520~325
-
4x4 Suspension Front Rear
MAKE & MODEL
YEAR
Shock Absorber
Spring Type
Shock Mount Open~ Closed
Shock
Absorber
Spring Type
Shock Mount Open~ Closed
Copyright: All rights reserved. No part of this catalogue may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without permission in writing from OzTec Suspension. ABN 16101241267 Page 35§ = Part number still in development. � = Old reference number - while stocks last.
Mitsubishi continuedL300 Van SA, SB, SC, SD, SE Raised height Comfort Adj’ Torsion Bar front Leaf spring rear
Fr:Raised 20~30mm Rr:Raised 30~40mm
1983~10/86
60661 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E3 344~226 60330 Raised Leaf
E1 / E1 560~340
L300 Van SA, SB, SC, SD, SE Raised height Cargo Adj’ Torsion Bar front Leaf spring rear
Fr:Raised 20~30mm Rr:Raised 30~40mm
1983~10/86
60661 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E3 344~226 60332 Raised Leaf
E1 / E1 560~340
Pajero SWB NA~NG (L042G, L043G, L044G) Standard height Comfort 60661 Adj’ Torsion Bar
Wheel Align’ Req’ if height altered
S1 / E3 344~226
Adj’ Torsion Bar front Leaf spring rear
Standard height
1983~1991
Steering Damper 40071E1 / E1 538~328
60330 Original Leaf E1 / E1 560~340
Pajero SWB NA~NG (L042G, L043G, L044G) Standard height Cargo 60661 Adj’ Torsion Bar
Wheel Align’ Req’ if height altered
S1 / E3 344~226
Adj’ Torsion Bar front Leaf spring rear
Standard height
1983~1991
Steering Damper 40071E1 / E1 538~328
60332 Original Leaf E1 / E1 560~340
-
4x4 Suspension Front Rear
MAKE & MODEL
YEAR
Shock Absorber
Spring Type
Shock Mount Open~ Closed
Shock
Absorber
Spring Type
Shock Mount Open~ Closed
Copyright: All rights reserved. No part of this catalogue may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without permission in writing from OzTec Suspension. ABN 16101241267 Page 36§ = Part number still in development. � = Old reference number - while stocks last.
Mitsubishi continuedPajero SWB NA~NG (L042G, L043G, L044G) Raised height Comfort
60661 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E3 344~226
Adj’ Torsion Bar front Leaf spring rear
Fr:Raised 20~30mm Rr:Raised 30~40mm
1983~1991
Steering Damper 40071E1 / E1 538~328
60060B Raised Leaf E1 / E1 595~363
Pajero SWB NA~NG (L042G, L043G, L044G) Raised height Cargo 60661 Adj’ Torsion Bar
Wheel Align’ Req’ if height altered
S1 / E3 344~226
Adj’ Torsion Bar front Leaf spring rear
Fr:Raised 20~30mm Rr:Raised 30~40mm
1983~1991
Steering Damper 40071E1 / E1 538~328
60061B Raised Leaf E1 / E1 595~363
Pajero LWB NA~NG (L047G, L048G, L049G) Standard height Comfort 60661 Adj’ Torsion Bar
Wheel Align’ Req’ if height altered
S1 / E3 344~226(Excl’ V6 & ITD)
Adj’ Torsion Bar front Leaf spring rear
Standard height
1983~1991
Steering Damper 40071E1 / E1 538~328
60330 Original Leaf E1 / E1 560~340
Pajero LWB NA~NG (L047G, L048G, L049G) Standard height Cargo 60661 Adj’ Torsion Bar
Wheel Align’ Req’ if height altered
S1 / E3 344~226(Excl’ V6 & ITD)
Adj’ Torsion Bar front Leaf spring rear
Standard height
1983~1991
Steering Damper 40071E1 / E1 538~328
60332 Original Leaf E1 / E1 560~340
-
4x4 Suspension Front Rear
MAKE & MODEL
YEAR
Shock Absorber
Spring Type
Shock Mount Open~ Closed
Shock
Absorber
Spring Type
Shock Mount Open~ Closed
Copyright: All rights reserved. No part of this catalogue may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without permission in writing from OzTec Suspension. ABN 16101241267 Page 37§ = Part number still in development. � = Old reference number - while stocks last.
Mitsubishi continued Pajero LWB NA~NG (L047G, L048G, L049G) Raised height Comfort
60661 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E3 344~226(Excl’ V6 & ITD)
Adj’ Torsion Bar front Leaf spring rear
Fr:Raised 20~30mm Rr:Raised 30~40mm
1983~1991
Steering Damper 40071E1 / E1 538~328
60060B Raised Leaf E1 / E1 595~363
Pajero LWB NA~NG (L047G, L048G, L049G) Raised height Cargo 60661 Adj’ Torsion Bar
Wheel Align’ Req’ if height altered
S1 / E3 344~226(Excl’ V6 & ITD)
Adj’ Torsion Bar front Leaf spring rear
Fr:Raised 20~30mm Rr:Raised 30~40mm
1983~1991
Steering Damper 40071E1 / E1 538~328
60061B Raised Leaf E1 / E1 595~363
Pajero LWB NF~NG Coil Rear (L141,144,146,149G) Standard height Comfort 60661 Adj’ Torsion Bar
Wheel Align’ Req’ if height altered
S1 / E3 344~226V6 & ITD
Adj’ Torsion Bar front Coil spring rear
Standard height
1988~1991
Steering Damper 40071E1 / E1 538~328
60091 Original Coil E1 / E2 510~318
Pajero LWB NF~NG Coil Rear (L141,144,146,149G) Raised height Comfort 60661 Adj’ Torsion Bar
Wheel Align’ Req’ if height altered
S1 / E3 344~226V6 & ITD
Adj’ Torsion Bar front Coil spring rear
Fr:Raised 20~30mm Rr:Raised 30~40mm
1988~1991
Steering Damper 40071E1 / E1 538~328
60091 Raised Coil E1 / E2 510~318
-
4x4 Suspension Front Rear
MAKE & MODEL
YEAR
Shock Absorber
Spring Type
Shock Mount Open~ Closed
Shock
Absorber
Spring Type
Shock Mount Open~ Closed
Copyright: All rights reserved. No part of this catalogue may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without permission in writing from OzTec Suspension. ABN 16101241267 Page 38§ = Part number still in development. � = Old reference number - while stocks last.
Mitsubishi continuedPajero LWB NF~NG Coil Rear (L141,144,146,149G) Raised height Cargo (MPAJ11)
60661 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E3 344~226V6 & ITD
Adj’ Torsion Bar front Coil spring rear
Fr:Raised 20~30mm Rr:Raised 30~40mm
1988~1991
Steering Damper 40071E1 / E1 538~328
60091 Raised Coil E1 / E2 510~318
Pajero SWB NH-NL Coil Rear (V64W,V65W,V68W) Standard height All All Engine options
Adj’ Torsion Bar front Coil spring rear
Standard height
1991~05/00
60671 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 344~226 60771 Original Coil
S1 / E2 495~305
Pajero SWB NH-NL Coil Rear (V64W,V65W,V68W) Raised height All All Engine options
Adj’ Torsion Bar front Coil spring rear
Fr:Raised 20~30mm Rr:Raised 30~40mm
1991~05/00
60671 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 344~226 60771 Raised Coil
S1 / E2 495~305
Pajero LWB NH-NL Coil Rear (V74W,V75W,V78W) Standard height All All Engine options
Adj’ Torsion Bar front Coil spring rear
Standard height
1991~05/00
60671 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 344~226 60771 Original Coil
S1 / E2 495~305
Pajero LWB NH-NL Coil Rear (V74W,V75W,V78W) Raised height All All Engine options
Adj’ Torsion Bar front Coil spring rear
Fr:Raised 20~30mm Rr:Raised 30~40mm
1991~05/00
60671 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 344~226 60771 Raised Coil
S1 / E2 495~305
-
4x4 Suspension Front Rear
MAKE & MODEL
YEAR
Shock Absorber
Spring Type
Shock Mount Open~ Closed
Shock
Absorber
Spring Type
Shock Mount Open~ Closed
Copyright: All rights reserved. No part of this catalogue may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without permission in writing from OzTec Suspension. ABN 16101241267 Page 39§ = Part number still in development. � = Old reference number - while stocks last.
Mitsubishi continuedPajero Base Van LWB NH-NJ (Leaf Rear)(V12,V32,V34,V36) Standard height Comfort Base Model 4Cyl Adj’ Torsion Bar front Leaf spring rear
Standard height
1991~11/96
60671 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 344~226 60330 Original Leaf
E1 / E1 560~340
Pajero Base Van LWB NH-NJ (Leaf Rear) (V12,V32,V34,V36) Standard height Cargo Base Model 4Cyl Adj’ Torsion Bar front Leaf spring rear
Standard height
1991~11/96
60671 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 344~226 60332 Original Leaf
E1 / E1 560~340
Pajero Base Van LWB NH-NJ (Leaf Rear) (V12,V32,V34,V36) Raised height Comfort Base Model 4Cyl Adj’ Torsion Bar front Leaf spring rear
Fr:Raised 20~30mm Rr:Raised 30~40mm
1991~11/96
60671 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 344~226 60060B Raised Leaf
E1 / E1 595~363
Pajero Base Van LWB NH-NJ (Leaf Rear) (V12,V32,V34,V36) Raised height Cargo Base Model 4Cyl Adj’ Torsion Bar front Leaf spring rear
Fr:Raised 20~30mm Rr:Raised 30~40mm
1991~11/96
60671 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 344~226 60061B Raised Leaf
E1 / E1 595~363
-
4x4 Suspension Front Rear
MAKE & MODEL
YEAR
Shock Absorber
Spring Type
Shock Mount Open~ Closed
Shock
Absorber
Spring Type
Shock Mount Open~ Closed
Copyright: All rights reserved. No part of this catalogue may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without permission in writing from OzTec Suspension. ABN 16101241267 Page 40§ = Part number still in development. � = Old reference number - while stocks last.
Mitsubishi continuedPajero LWB NM ~NT V6 Petrol & Turbo Diesel Wagon Standard height All Coil spring front, Coil spring rear Standard height
05/00~2010
80105 § Original Equip S1 / E2 487~333Shock with spring seat
60831 § Original Equip S1 / E2
Pajero LWB NM ~NT V6 Petrol & Turbo Diesel Wagon Raised height All Coil spring front Coil spring rear Raised 40~50mm
05/00~2010
80105 §
Raised Coil
Wheel Align’ Req’ if height altered
S1 / E2 487~333
Shock with spring seat
60831 §
Raised Coil
Wheel Align’ Req’ if height altered
S1 / E2
Triton ME,MF,MG,MH Standard height Comfort Adj’ Torsion Bar front Leaf spring rear
Standard height
1987~1993
60661 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E3 344~226 60200 Original Leaf
E1 / E1 630~380
Triton ME, MF, MG, MH Standard height Cargo Adj’ Torsion Bar front Leaf spring rear
Standard height
1987~1993
60661 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E3 344~226 60201 Original Leaf
E1 / E1 630~380
Triton ME, MF, MG, MH Raised height Comfort Adj’ Torsion Bar front Leaf spring rear
Fr:Raised 20~30mm Rr:Raised 30~40mm
1987~1993
60661 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E3 344~226 60320 Raised Leaf
E1 / E1 664~407
-
4x4 Suspension Front Rear
MAKE & MODEL
YEAR
Shock Absorber
Spring Type
Shock Mount Open~ Closed
Shock
Absorber
Spring Type
Shock Mount Open~ Closed
Copyright: All rights reserved. No part of this catalogue may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without permission in writing from OzTec Suspension. ABN 16101241267 Page 41§ = Part number still in development. � = Old reference number - while stocks last.
Mitsubishi continuedTriton ME, MF, MG, MH Raised height Cargo Adj’ Torsion Bar front Leaf spring rear
Fr:Raised 20~30mm Rr:Raised 30~40mm
1987~1993
60661 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E3 344~226 60321 Raised Leaf
E1 / E1 664~407
Triton MJ Standard height Comfort Adj’ Torsion Bar front Leaf spring rear
Standard height
1993~11/96
60661 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E3 344~226 60200 Original Leaf
E1 / E1 630~380
Triton MJ Standard height Cargo Adj’ Torsion Bar front Leaf spring rear
Standard height
1993~11/96
60661 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E3 344~226 60201 Original Leaf
E1 / E1 630~380
Triton MJ Raised height Comfort Adj’ Torsion Bar frontLeaf spring rear
Fr:Raised 20~30mm Rr:Raised 30~40mm
1993~11/96
60661 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E3 344~226 60320 Raised Leaf
E1 / E1 664~407
Triton MJ Raised height Cargo Adj’ Torsion Bar frontLeaf spring rear
Fr:Raised 20~30mm Rr:Raised 30~40mm
1993~11/96
60661 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E3 344~226 60321 Raised Leaf
E1 / E1 664~407
-
4x4 Suspension Front Rear
MAKE & MODEL
YEAR
Shock Absorber
Spring Type
Shock Mount Open~ Closed
Shock
Absorber
Spring Type
Shock Mount Open~ Closed
Copyright: All rights reserved. No part of this catalogue may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without permission in writing from OzTec Suspension. ABN 16101241267 Page 42§ = Part number still in development. � = Old reference number - while stocks last.
Mitsubishi continuedTriton MK Standard height Comfort Adj’ Torsion Bar front Leaf spring rear
Standard height
11/96~2006
60671 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 344~226 60200 Original Leaf
E1 / E1 630~380
Triton MK Standard height Cargo Adj’ Torsion Bar front Leaf spring rear
11/96~2006
60671 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 344~226 60201 Original Leaf
E1 / E1 630~380
Triton MK Raised height Comfort Adj’ Torsion Bar front, Leaf spring rear
Fr:Raised 20~30mm Rr:Raised 30~40mm
11/96~2006
60671 Adj’ Torsion Bar Wheel Align’ Req’ if height altered
S1 / E2 344~226 60320 Raised Leaf
E1 / E1 664~407
Triton MK Raised height Cargo Adj’ Torsion Bar front Leaf spring rear
Fr:Raised 20~30mm Rr:Raised 30~40mm
11/96~2006
60671 Adj’ Torsion Bar 112041370 L @ 27.5mm
Wheel Align’ Req’ if height altered
S1 / E2 344~226 60321 Raised Leaf
E1 / E1 664~407
-
4x4 Suspension Front Rear
MAKE & MODEL
YEAR
Shock Absorber
Spring Type
Shock Mount Open~ Closed
Shock
Absorber
Spring Type
Shock Mount Open~ Closed
Copyright: All rights reserved. No part of this catalogue may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage or retrieval system, without permission in writing from OzTec Suspension. ABN 16101241267 Page 43§ = Part number still in development. � = Old reference number - while stocks last.
Mitsubishi continuedTriton ML~MN Standard height Comfort Coil front Leaf spring rear
Standard height
07/06~2010
80104 Original Equip S1 / E2 427~314Shock with spring seat
60330 Original Leaf E1 / E1 560~340
Triton ML~MN Standard height Cargo Coil front Leaf spring rear
Bull Bar & Winch
Standard height
07/06~2010
80104 Original Equip S1 / E2 427~314Shock with spring seat
60332 Original Leaf E1 / E1 560~340
Triton ML~MN Raised height Comfort Coil front Leaf spring rear
Fr:Raised 30mm Rr:Raised 30mm
07/06~2010
80104 Raised Coil
Wheel Align’ Req’ if height altered
S1 / E2 427~314
Shock with spring