R&M Specialist Catalogue

Specialist CatalogueAll of your Specialist Electrical needs in one book!

Distributing throughout the Middle East, including Oman, Qatar, Iraq, Afghanistan and Bahrain, we have extensive stocking facilities in Dubai, Abu Dhabi and Iraq, with additional distributing branches in Kazakhstan and Azerbaijan. Set up to service the Caspian Region, today we successfully service major international companies with long-term contracts covering oil & gas exploration and production.

R&M is a global operator, and we are experienced in the supply of a diverse range of electrical equipment for many types of environments, actively working within the Commercial, Industrial, Marine, Oil, Gas & Petrochemical Industries, and the Pharmaceutical sectors.

R&M IntroductionThe R&M Electrical Group is one of the largest independent electrical distributors in the UK, providing a range of products and services to a worldwide customer base. Besides a number of specialist divisions and branches in the UK, R&M has overseas branches in the Caspian Region and the Middle East.

Since our formation in 1987 R&M has been stockists for some of the world’s leading electrical manufacturers. Our diverse product range and our membership of ANEW (largest independent buying group in the UK) ensures that we can supply a complete solution to our customers. As well as our UK stocking branches we have eight specialist divisions; R&M Cables in Bristol, R&M Fixings & Supports and R&M Marine Division based in Southampton, R&M Assembly and our Lighting, Hazardous Area, Projects and Exports Divisions based at our Southampton Head Office.

These specialist divisions allow R&M to offer an expert service, and worldwide delivery in all areas of electrical distribution.

Across the UK six R&M Electrical Branches operate in strategic areas offering a fully comprehensive service covering the sale and supply of commercial, industrial, marine and hazardous area electrical equipment and related products.

We are stockists for some of the world’s leading manufacturers with each Branch holding stock utilising a variety of different manufacturers, delivered to our customers by our own fleet of vehicles. As a result of this R&M, with its diverse product range can supply solutions for all your electrical needs whatever your specific application.

R&M is a company with a worldwide reach; through direct international distribution from the UK, through our joint ventures with some of the world’s leading distributors such as Wholsale Electric in the US, CNW in Australia, Siraj Naybur in Iraq and through our overseas facilities.

1 www.rm-electrical.com

Commercial - Several R&M branches have been formed to cater for the commercial sectors. By partnering with R&M on your contracts and projects we can link you with Europe’s leading manufacturers of products specified and used within the commercial building sectors.

Industrial - From heavy duty power cables, LV, MV and HV switchgear including isolators, switch fuses and distribution boards, transformers, generators, IP67 415v 3P&N plugs and sockets, industrial lighting, buzz bars, weather protected switches and sockets, surge protectors, UPS, site electrics and heavy gauge galvanised trays, baskets and ladders R&M can supply the complete range of industrial electrical products for any application both in the UK and overseas.

Marine - With our Head Office based in Southampton (home to a world-leading cruise industry, the UK’s number one port for vehicle imports and exports, and the UK’s second largest container terminal), and a branch located within Portsmouth’s dockyard, R&M are ideally placed to offer a unique and personalised service, tailored to the specific requirements of the marine, naval and cruise industries. R&M offers an account specific service for several shipping companies, each with diverse requirements. Our dedicated marine project managers specialise in the rapid supply of marine specific products, delivered to any international port, at a time that is suitable to the client. We have many years of experience in all aspects of the marine sector including ship repair, ship building and maintenance and operational support.

Oil, Gas & Petrochemical Industries - The R&M group of companies specialise in a number of major areas within the OGP sectors - Maintenance, Repair and Operational (MRO) contracts, Project Supply and Export Supply. R&M Divisions successfully service major International Oil and Gas Companies worldwide, offering our MRO customers bespoke on-line technical catalogues for use in the harshest of field environments, and the ability to interface directly with our processing systems. We have an impressive track record in supplying major onshore and offshore projects across the globe, and are experts in the supply of flameproof, hazardous area and industrial electrical equipment and cables to onshore production and refining facilities both in the UK and overseas.

Pharmaceutical - Attention to fine detail and complete cleanliness are crucial to our work in the Pharmaceutical sector. We provide electrical equipment, supplies and cables and are able to use our experience of delivering materials for hazardous and specialist areas to great effect.

[email protected] 2

Solutions for all your Electrical NeedsWith our head office in Southampton and branches with different focuses all over the UK, R&M can cover any electrical distribution requirement you may have. We’re approved stockists of products for many of the largest electrical equipment manufacturers in the world. This applies not only to cables and cable support products, but also to hazardous area equipment, lighting and electrical housing and apparatus as well.

R&M Assembly Division - Our Assembly Division, under license from manufacturers such as Cooper Crouse Hinds, Weidmuller and Hawke, are able to drill, modify and populate fully certified enclosures, control stations and junction boxes for hazardous area and industrial applications. R&M Assembly Division services a wide range of specialist industries including those in the oil, gas and petrochemical industries, food & beverage and water treatment industries, OEM’s and those requiring enclosures to withstand the most aggressive and/or outdoor environments.

Holding large stocks of stainless steel and GRP boxes we are able to reduce lead times significantly for your bespoke junction and terminal box requirements. We are also a major assembly partner for the Schneider Group and Dorman Smith and can supply fully tested LV panel and distribution boards for industrial applications, and offer a Computer Aided Design (CAD) service.

R&M Cables Division - Our Cables Division is a significant development in the extension of the service capabilities of the R&M Group. We supply all types of cables, cut to order, be it instrumentation, power, control, telecommunication or data cables. R&M has established very close relationships with many of the world’s largest cable manufacturers including Prysmian, Nexans, CCI, Draka, General Cables, Belden and many other well-known international names.

R&M Fixings & Supports Ltd - R&M’s Fixings & Supports Division aims to simplify the procurement process for the entire scope of first fix materials including containment, fixings, hangers, pipe supports and power tools to both mechanical and electrical contractors. R&M Fixings & Supports are able to offer a pre-fabricated service bespoke to our clients requirements, and shipped direct to site for installation - saving installer’s time and money. Operating nationally this specialist division has a wealth of experience of working in this field over the past twenty years.

R&M Hazardous Area EX Division - The R&M Hazardous Area EX Division supply Hazardous Area and Industrial Equipment to the Oil, Gas, Petro-Chemical and Pharmaceutical Markets. With a large stock holding of hazardous area electrical equipment, R&M has over 25 years experience in the supply of the world’s foremost manufacturers in this area, including Cooper Crouse-Hinds (CEAG), Hawke Cable Glands, Weidmuller, Peppers Cable Glands, Legrand ATX, Stahl, Chalmit, Roxtec and CSD Rise. We are also able to offer specialist training in this area.

R&M Exports Division - Throughout the world R&M Exports supply the exact electrical products needed to meet specification applications, often in harsh environments where extreme temperatures are encountered. We supply a wide range of industries and our dedicated Exports Division


[email protected] 4

has many years of experience in supporting our customers operating overseas. Exporting to over 80 countries worldwide we have gained an invaluable understanding of international supply chain management ensuring that your materials arrive on time, adequately packed and with the correct paperwork and shipping invoices.

R&M Projects Division - R&M Electrical Group has a standalone dedicated Projects Division. This division offers an exemplary project and management solution to the on-shore oil and off-shore gas, petrochemical, engineering and pharmaceutical markets. This service encompasses all aspects of project supply from initial specification assistance, tendering, project and material management, packing and logistics through to the provision of maintenance and commissioning spares. The division also has an integrated documentation department for providing all required GA drawings, test certificates and schematics and Manufacturing Record Books.

R&M Wholesale Electric LLP - Firmly established in Dubai the partnership between R&M Electrical and the USA’s Wholesale Electric Supply combine the geographic strengths and capabilities of two of the world’s leading independently owned electrical distributors to offer a service and capability that is unique in the Middle East.

R&M Wholesale Electric LLP offers the definitive solution in the distribution and supply of electrical equipment to major oil and gas, power, and construction projects across the region, whether specifications are to NEC or IEC standards, with distributing branches in Abu Dhabi we are active across the entire Middle East Region.

The Caspian Region - With a fundamental area of R&M’s business being the supply and support of electrical equipment for installation in Oil and Gas exploration and production, Petrochem and Chemical Processing, it is only natural that a substantial proportion of equipment supplied by R&M is destined for use in the Caspian Region. With this in mind, in 1998 R&M established their own Distribution Companies in Kazakhstan and Azerbaijan; we hold long term MRO agreements with a number of operators in this region and carry dedicated inventories to support this business.

R&M Group History1987 R&M Electrical Group Ltd was established in Southampton.1988 Second distribution Warehouse opened in Bournemouth, Dorset.1994 Third distribution Warehouse opened in the Naval Dockyard Portsmouth, specializing in Marine and Industrial products.1996 Fourth distribution Warehouse opened in Swansea. 1996 R&M Electrical (Export) Division launched, operating from the Head Office in Southampton. 1997 R&M Projects Division formed following continued success in securing contracts for a number of internationally recognized projects worldwide. 1998 R&M Electrical Group launch R&M Caspian Ltd their first wholly owned Foreign Company in Baku, Azerbaijan.1999 R&M launch In-house Facility for Assembly of Hazardous Area Terminal Boxes, control stations and LV distribution and Panel- boards. 2000 R&M Southampton Central was acquired to service our local commercial contractors.2001 R&M Kazakhstan LLP launched in Atyrau, Kazakhstan to offer local content and support to Oil and Gas operators in the area.2002 R&M form strategic joint venture alliance with Wholesale Electric Houston one of the largest independently owned electrical distributors in the USA to target projects globally.2003 R&M Cables Division opened in Avonmouth, maintaining large dedicated stocks of power, instrumentation and telecommunication cables. 2005 R&M Fixings Ltd opened in Southampton offering specialized distribution of containment products including fixings, cable management & supports, power tools, accessories & more.2006 R&M Neyland opened. Strategically positioned near Pembroke to service the nearby Chevron Texaco refinery, South Hook and Dragon LPG storage facilities, the Murco Refinery and the Milford Haven receiving terminal and Port. 2007 R&M open new distribution facility In Oxford to service local industry and overseas government contracts. 2008 R&M Wholesale Electric launched in Dubai UAE servicing the Middle East OGP sectors specialising in Industrial and Hazardous Area Electrical Equipment.2010 Group Turnover Exceeds 50 million GBP 2011 TSG consortium formed to service the growing Australian OGP Markets, R&M form strategic alliance with partner companies and are successful in winning major electrical contracts for the Gorgon LNG Project.

2011 R&M wins the 2011 Hampshire Business Award

2012 R&M Electical Group Ltd Celebrates its 25th Year

2012 Group Turnover Exceeds 80 million GBP

2012 R&M opens a new office in Abu Dhabi

2012 R&M Wholesale opens SIRAJ NAYBUR a new joint venture in Iraq

2012 R&M wins the Solent 250 Award for Best Exporter


Specialist Distribution Our company offers an unrivalled product range. Through our extensive distributorships and affiliation to A.N.E.W (the largest Independent Electrical Buying Group in the U.K) are able to offer The Definitive One Stop Facility to our Clients.

Over the years our sole objective has been to become specialists in what we believe to be the more interesting side of electrical distribution. In that time we have become experts in the supply of Hazardous Area and Industrial Equipment to the Oil, Gas, Petro-Chem, Marine and Pharmaceutical Markets. An integral part of this service is our ability to supply all the specialist products required to meet any contract specification anywhere in the world.

We have a team of specialised and experienced Sales Engineers that have hands on experience in dealing with the Oil, Gas and Petrochemical, industrial and commercial sectors. Our expert staff are ready to discuss your needs and keep you up to date with new ideas, products and concepts.

Our aim is to offer our clients the best products from the world’s leading manufacturers at the most competitive prices available.

beta cable management systems ltd

[email protected] 6

Contents

CABLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-18

CABLE ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . 19-28

CABLE GLANDS . . . . . . . . . . . . . . . . . . . . . . . . . . . 27-42

CABLE MANAGEMENT . . . . . . . . . . . . . . . . . . . . . 43-68

CABLE SEALING SYSTEMS . . . . . . . . . . . . . . . . . 69-73

ENCLOSURES & JUNCTION BOXES . . . . . . . . . . 74-85

FIXINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86-97

LIGHTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98-122

MOTOR CONTROL GEAR . . . . . . . . . . . . . . . . .123-144

SPECIALIST & HAZARDOUS AREA EQUIPMENT . . . 145-155

SWITCHGEAR & DISTRIBUTION . . . . . . . . . . .156-183

TERMINALS & CONNECTORS . . . . . . . . . . . . .184-190

WIRING ACCESSORIES & ANCILLARIES . . . .191-196

TECHNICAL INFORMATION . . . . . . . . . . . . . .197-221

ARMOURED POWER CABLE

ARMOURED POWER & CONTROL CABLE

FIRE PERFORMANCE CABLE

GENERAL WIRING CABLE

INSTRUMENTATION CABLE - ARMOURED

INSTRUMENTATION CABLE - UNARMOURED

MULTICORE CONTROL CABLE

RUBBER FLEXIBLE CABLE

TRI- RATED CABLE

CABLEPlease see our Technical Section for

Cable Current Capacities Chart

[email protected] 8

ARMOURED POWER CABLE694*B Armoured XLPE/LSF/SWA/LSF Steel Wire Armoured Cable (Low Smoke)

XLPE/PVC/SWA/PVC PC Steel Wire Armoured Cable

For mains distribution, underground ducts or surface installation.

Technical: • Construction: Plain annealed stranded copper conductors, cross-linked polyethylene (XLPE) insulation, low smoke and fume compound armoured bedding, steel wire armour, low smoke and fume compound sheath – black • Voltage Rating: 600/1000 Volts • Temperature Range: 0°C to +50°C for installation -15°C to +90°C for operation • Relevant Standards: BS6724 for construction BS/EN 60228 Class 2 for conductors BS/EN 60811-1-4:1995 for insulation and sheathing materials BS/EN 10257-1 for aluminium wire armour IEC 60332-1-2 for Flame Retardancy tests on a single cable IEC 60332 -2-24 (Cat C) for Flame Retardancy tests on bunched cables IEC 61034-1-2 Part 2 for smoke emission IEC 60754-1-2 for corrosive and acid gas emission test

For mains distribution, underground ducts or surface installation.

Technical: • Construction: Plain annealed stranded copper conductors, cross-linked polyethylene (XLPE) insulation, PVC bedding, galvanised steel wire armour, PVC sheath - Black • Voltage Rating: 600/1000 Volts • Temperature Range: 0°C to +50°C for installation -15°C to +90°C for operation • Relevant Standards: BS5467 for construction BS/EN 60228 Class 2 for conductors BS/EN 60811-1-4:1995 for insulation and sheathing materials BS/EN 10257-1 for galvanised steel wire armour IEC 60332-1-2:2004 for Flame Retardancy

Sold per meter. Further sizes available - please call for details. Full technical data sheet available on request


Code CMA Ref Core Conductor Colour04002C025.0XBK 6942B25 2 25.0mm² Black04002C035.0XBK 6942B35 2 35.0mm² Black04002C050.0XBK 6942B50 2 50.0mm² Black04003C025.0XBK* 6943B25 3 25.0mm² Black04003C035.0XBK 6943B35 3 35.0mm² Black04003C050.0XBK 6943B50 3 50.0mm² Black04003C070.0XBK 6943B70 3 70.0mm² Black04003C095.0XBK 6943B95 3 95.0mm² Black04004C025.0XBK 6944B25 4 25.0mm² Black

Code CMA Ref Core Conductor Colour04004C035.0XBK 6944B35 4 35.0mm² Black04004C050.0XBK 6944B50 4 50.0mm² Black04004C070.0XBK 6944B70 4 70.0mm² Black04004C095.0XBK 6944B95 4 95.0mm² Black04004C120.0XBK 6944B120 4 120.0mm² Black04004C150.0XBK 6944B150 4 150.0mm² Black04004C185.0XBK 6944B185 4 185.0mm² Black04005C025.0XBK 6945B25 5 25.0mm² Black04005C035.0XBK 6945B35 5 35.0mm² Black

Code CMA Ref Core Conductor Colour03001C095.0XBK 6941AX95 1 95.0mm² Black03001C120.0XBK 6941AX120 1 120.0mm² Black03001C150.0XBK 6941AX150 1 150.0mm² Black03001C185.0XBK 6941AX185 1 185.0mm² Black03001C240.0XBK 6941AX240 1 240.0mm² Black03001C300.0XBK 6941AX300 1 300.0mm² Black03001C500.0XBK 6941AX500 1 500.0mm² Black03002C025.0XBK 6942X25 2 25.0mm² Black03002C035.0XBK 6942X35 2 35.0mm² Black03002C050.0XBK 6942X50 2 50.0mm² Black03003C025.0XBK 6943X25 3 25.0mm² Black03003C035.0XBK 6943X35 3 35.0mm² Black

Code CMA Ref Core Conductor Colour03003C050.0XBK 6943X50 3 50.0mm² Black03003C070.0XBK 6943X70 3 70.0mm² Black03003C095.0XBK 6943X95 3 95.0mm² Black03004C025.0XBK 6944X25 4 25.0mm² Black03004C035.0XBK 6944X35 4 35.0mm² Black03004C050.0XBK 6944X50 4 50.0mm² Black03004C070.0XBK 6944X70 4 70.0mm² Black03004C095.0XBK 6944X95 4 95.0mm² Black03005C025.0XBK 6945X25 5 25.0mm² Black03005C035.0XBK 6945X35 5 35.0mm² Black03005C050.0XBK 6945X50 5 50.0mm² Black03005C095.0XBK 6945X95 5 95.0mm² Black

CABLE

www.rm-electrical.com9

ARMOURED POWER & CONTROL CABLE694*B Armoured XLPE/PVC/SWA/LSF Steel Wire Armoured Cable (Low Smoke)

694*X Armoured XLPE/PVC/SWA/PVC PC Steel Wire Armoured Cable

For mains distribution, underground ducts or surface installation.Technical: • Construction: Plain annealed stranded copper conductors, cross-linked polyethylene (XLPE) insulation, low smoke and fume compound armoured bedding, galvanized steel wire armour, low smoke and fume compound sheath – black • Voltage Rating: 600/1000 Volts • Temperature Range: 0°C to +50°C for installation -15°C to +90°C for operation • Relevant Standards: BS6724 for construction BS/EN 60228 Class 2 for conductors BS/EN 60811-1-4:1995 for insulation and sheathing materials BS/EN 10257-1 for galvanized steel wire armour IEC 60332-1-2 for Flame Retardancy tests on a single cable IEC 60332 -2-24 (Cat C) for Flame Retardancy tests on bunched cables IEC 61034-1-2 Part 2 for smoke emission IEC 60754-1-2 for corrosive and acid gas emission test

For mains distribution, underground ducts or surface installation.Technical: • Construction: Plain annealed stranded copper conductors, cross-linked polyethylene (XLPE) insulation, PVC bedding, galvanised steel wire armour, PVC sheath - black • Voltage Rating: 600/1000 Volts • Temperature Range: 0°C to +50°C for installation -15°C to +90°C for operation • Relevant Standards: BS5467 for construction BS/EN 60228 Class 2 Class 2 for conductors BS/EN 60811 -1-4:1995 for insulation and sheathing materials BS/EN 10257-1 for galvanised steel wire armour IEC 60332-1-2-:2004 for Flame Retardancy



Code CMA Ref Core Conductor Colour02002C001.5XBK 6942B 2 1.5mm² Black02002C002.5XBK 6942B 2 2.5mm² Black02002C004.0XBK 6942B 2 4.0mm² Black02002C006.0XBK 6942B 2 6.0mm² Black02002C010.0XBK 6942B 2 10.0mm² Black02002C016.0XBK 6942B 2 16.0mm² Black02003C001.5XBK 6943B 3 1.5mm² Black02003C002.5XBK 6943B 3 2.5mm² Black02003C004.0XBK 6943B 3 4.0mm² Black

Code CMA Ref Core Conductor Colour02003C006.0XBK 6943B 3 6.0mm² Black02003C010.0XBK 6943B 3 10.0mm² Black02003C016.0XBK 6943B 3 16.0mm² Black02004C001.5XBK 6944B 4 1.5mm² Black02004C002.5XBK 6944B 4 2.5mm² Black02004C004.0XBK 6944B 4 4.0mm² Black02004C006.0XBK 6944B 4 6.0mm² Black02004C010.0XBK 6944B 4 10.0mm² Black02004C016.0XBK 6944B 4 16.0mm² Black

Code CMA Ref Core Conductor Colour01002C001.5XBK 6942X 2 1.5mm² Black01002C002.5XBK 6942X 2 2.5mm² Black01002C004.0XBK 6942X 2 4.0mm² Black01002C006.0XBK 6942X 2 6.0mm² Black01002C010.0XBK 6942X 2 10.0mm² Black01002C016.0XBK 6942X 2 16.0mm² Black01003C001.5XBK 6943X 3 1.5mm² Black01003C002.5XBK 6943X 3 2.5mm² Black01003C004.0XBK 6943X 3 4.0mm² Black01003C006.0XBK 6943X 3 6.0mm² Black01003C010.0XBK 6943X 3 10.0mm² Black01003C016.0XBK 6943X 3 16.0mm² Black

Code CMA Ref Core Conductor Colour01004C001.5XBK 6944X 4 1.5mm² Black01004C002.5XBK 6944X 4 2.5mm² Black01004C004.0XBK 6944X 4 4.0mm² Black01004C006.0XBK 6944X 4 6.0mm² Black01004C010.0XBK 6944X 4 10.0mm² Black01004C016.0XBK 6944X 4 16.0mm² Black01005C001.5XBK 6945X 5 1.5mm² Black01005C002.5XBK 6945X 5 2.5mm² Black01005C004.0XBK 6945X 5 4.0mm² Black01005C006.0XBK 6945X 5 6.0mm² Black01005C010.0XBK 6945X 5 10.0mm² Black01005C016.0XBK 6945X 5 16.0mm² Black

[email protected] 10

FP 200 Gold Multicore Fire Performance Cable

6491B PVC Insulated Single Core LSF Cable

Suitable For: • Fire detection and fire alarm sytems for buildings • Voice alarm systems • Emergency lighting • Other essential service circuitsTechnical: • Construction: Plain annealed solid copper conductors, Fire resistant – LSZH silicone insulation, Aluminium backed polyester foil in touch with a tinned solid earth wire, Low smoke, zero halogen compound sheath • Voltage Rating: 300/500 Volts • Temperature Range: 0°C to +50°C for installation -40°C to +90°C for operation • Relevant Standards: BS7629-1 for construction BS/EN Class 1 for conductors *4mm² - Class 2 IEC 60332-1-2:2004 for Flame Retardancy of a single cable IEC 60332-3-24 for Flame Retardancy of bunched cables IEC 60754-1 for HCL emission tests IEC 61034-1-2 for smoke density tests BS/EN50200 & BS6387 Categories C W & Z, for fire resistance, water spray & mechanical shock tests.

General purpose cable for use in trunking and conduit. 6491B produces lower levels of smoke and corrosive gases under fire conditions when compared with 6491X.

Technical: • Construction: Plain annealed circular stranded copper conductor, LSZH sheath - green/yellow • Voltage Rating: 450/750 Volts • Temperature Range: 0°C to +50°C for installation -15°C to +90°C for operation • Relevant Standards: BS7211 for construction BS/EN 60228 Class 2 for conductors BS7655 for sheathing material IEC 60332-1-2 for Flame Retardancy Harmonised Type H07Z-K

Substitute * with Colour Code RequiredBL BLACK BR BROWN GR GREY BU BLUE EY GREEN/YELLOWFurther sizes available - please call for details. Full technical data sheet available on request

Further sizes available - please call for details. Full technical data sheet available on request

Order Code Core Conductor Colour Drum Clips55G02C001.0CRD 2 1.0mm² Red 100m AP7RED55G02C001.0CWT 2 1.0mm² White 100m AP7WHI55G02C001.5CRD 2 1.5mm² Red 100m AP7RED55G02C001.5CWT 2 1.5mm² White 100m AP7WHI55G02C002.5CRD 2 2.5mm² Red 100m AP9RED55G02C002.5CWT 2 2.5mm² White 100m AP9WHI55G02C004.0CRD 2 4.0mm² Red 100m AP11RED55G02C004.0CWT 2 4.0mm² White 100m AP11WHI

Order Code Core Conductor Colour Drum Clips55G03C001.5CRD 3 1.5mm² Red 100m AP8RED55G03C001.5CWT 3 1.5mm² White 100m AP8WHI55G03C002.5CRD 3 2.5mm² Red 100m AP10RED55G03C002.5CWT 3 2.5mm² WHI 100m AP10WHI55G04C001.5CRD 4 1.5mm² Red 100m AP9RED55G04C001.5CWT 4 1.5mm² White 100m AP9WHI55G04C002.5CRD 4 2.5mm² Red 100m AP11RED55G04C002.5CWT 4 2.5mm² White 100m AP11WH

Code CMA Ref Core Conductor Drum06001C001.5X* 6491B 1 1.5mm² 100m06001C002.5X* 6491B 1 2.5mm² 100m06001C004.0X* 6491B 1 4.0mm² 100m06001C006.0X* 6491B 1 6.0mm² 100m06001C010.0X* 6491B 1 10.0mm² 100m06001C016.0X* 6491B 1 16.0mm² Per Meter

Code CMA Ref Core Conductor Drum06001C025.0X* 6491B 1 25.0mm² Per Meter06001C035.0X* 6491B 1 35.0mm² Per Meter06001C050.0X* 6491B 1 50.0mm² Per Meter06001C070.0X* 6491B 1 70.0mm² Per Meter06001C095.0X* 6491B 1 95.0mm² Per Meter

FIRE PERFORMANCE CABLE

GENERAL WIRING CABLE

CABLE


6491X PVC Insulated Single Core CableGeneral purpose cable for use in trunking and conduit.

Technical: • Construction: Plain annealed stranded copper conductor, PVC sheath – green/yellow • Voltage Rating: 450/750 Volts • Temperature Range: 0°C to +50°C for installation -15°C to +90°C for operation • Relevant Standards: BS6004 for construction BS/EN 60228 Class 2 for conductors BS7655 for sheathing material IEC 60332-1-2 for Flame Retardancy Harmonised Type H07-VR

Substitute * with Colour Code RequiredBL BLACK BR BROWN GR GREY BU BLUE EY GREEN/YELLOW

Code CMA Ref Core Conductor Drum05001C001.5X* 6491X 1 1.5mm² 100m05001C002.5X* 6491X 1 2.5mm² 100m05001C004.0X* 6491X 1 4.0mm² 100m05001C006.0X* 6491X 1 6.0mm² 100m05001C010.0X* 6491X 1 10.0mm² Per Meter05001C016.0X* 6491X 1 16.0mm² Per Meter

Code CMA Ref Core Conductor Drum05001C025.0X* 6491X 1 25.0mm² Per Meter05001C035.0X* 6491X 1 35.0mm² Per Meter05001C050.0X* 6491X 1 50.0mm² Per Meter05001C070.0X* 6491X 1 70.0mm² Per Meter05001C095.0X* 6491X 1 95.0mm² Per Meter

INSTRUMENTATION CABLE - ARMOURED

BS5308 (Part 1, Type 2) Collectively Screened Instrumentation Cable - Flame Retardant - ArmouredTechnical: • Construction: Plain annealed copper conductors(*), Polyethylene insulation - twisted to form a pair, collective Aluminium-polyester foil tape screen c/w tinned copper drain wire(s), Polyethylene bedding, galvanized steel wire armour, Flame Retardant PVC sheath - Black, Blue or Grey (other colours available on request). 0.5mm² and 0.75mm² versions are flexible. 1.0mm² version is stranded • Voltage Rating: 300/500 Volts • Temperature Range: -0°C to +50°C for installation -20°C to +70°C for operation • Relevant Standards: BS5308 Part 1 Type 2 for construction BS/EN 60228 Class 2 and Class 5 as appropriate for conductors BS6234 Type 03 for insulation BS6234 Type 03C for bedding BS EN 10257-1 for galvanized steel wire armour BS7655 for PVC sheath IEC 60332 - 1 for Flame Retardancy tests of a single cable IEC 60332 - 3 -24 for Flame Retardancy test of bunched cables

Code Core Conductor Colour19001P000.5CBK 1 Pair 0.5mm² Black19001P00.75CBK 1 Pair 0.75mm² Black19001P001.5CBK 1 Pair 1.5mm² Black19005P000.5CBK 5 Pair 0.5mm² Black19005P00.75CBK 5 Pair 0.75mm² Black19005P001.5CBK 5 Pair 1.5mm² Black19005P002.5CBK 5 Pair 2.5mm² Black

Code Core Conductor Colour19010P000.5CBK 10 Pair 0.5mm² Black19010P00.75CBK 10 Pair 0.75mm² Black19010P001.5CBK 10 Pair 1.5mm² Black19020P000.5CBK 20 Pair 0.5mm² Black19020P00.75CBK 20 Pair 0.75mm² Black19020P001.5CBK 20 Pair 1.5mm² Black



BS5308 (Part 1, Type 2) Individually & Collectively Screened Instrumentation Cable - Flame Retardant - Armoured

Bs5308 (Part 2, Type 2) Collectively Screened Instrumentation Cable - Flame Retardant - Armoured

Technical: • Construction: Plain annealed copper conductors, Polyethylene insulation - twisted to form a pair, Individual Aluminium-polyester foil tape screens c/w tinned copper drain wires, collective Aluminium-Polyester foil tape screen c/w tinned copper drain wire(s), Polyethylene bedding, galvanized steel wire armour, Flame Retardant PVC sheath 0.5mm² and 0.75mm² versions are flexible. 1.0mm² version is stranded • Voltage Rating: 300/500 Volts • Temperature Range: -0°C to +50°C for installation -20°C to +70°C for operation • Relevant Standards: BS5308 Part 1 Type 2 for construction BS EN 60228 Class 2 and Class 5 as appropriate for conductors BS6234 Type 03 for insulation BS6234 Type 03C for bedding BS EN 10257-1 for galvanized steel wire armour BS7655 for PVC sheath IEC 60332 -1 for Flame Retardancy tests of a single cable IEC 60332-3-24 for Flame Retardancy tests of bunched cables

Technical: • Construction: Plain annealed copper conductors, PVC insulation - twisted to form a pair(s), collective Aluminium-polyester foil tape screen c/w tinned copper drain wire(s), PVC bedding, galvanized steel wire armour, Flame Retardant PVC sheath. 0.5mm² and 0.75mm² versions are flexible. 1.0mm² version is stranded • Voltage Rating: 300/500 Volts • Temperature Range: -0°C to +50°C for installation -20°C to +70°C for operation • Relevant Standards: BS5308 Part 2 Type 2 for construction BS/EN 60228 Class 2 and Class 5 as appropriate for conductors BS7655 Type TI1 for insulation BS7655 Type TM1 for bedding BS EN 10257-1 for galvanized steel wire armour BS7655 for PVC sheath BS4066 Part 1 (IEC 60332 Part 1) for Flame Retardancy BS4066 Part 3 Category C (IEC 60332 Part 3 Category C) for Flame Retardancy

Code Core Conductor Colour19002P000.5IBK 2 Pair 0.5mm² Black19002P00.75IBK 2 Pair 0.75mm² Black19002P001.5IBK 2 Pair 1.5mm² Black19005P000.5IBK 5 Pair 0.5mm² Black19005P00.75IBK 5 Pair 0.75mm² Black19005P001.5IBK 5 Pair 1.5mm² Black



Code Core Conductor Colour20010P000.5CBK 10 Pair 0.5mm² Black20010P00.75CBK 10 Pair 0.75mm² Black20010P001.5CBK 10 Pair 1.5mm² Black20020P000.5CBK 20 Pair 0.5mm² Black20020P00.75CBK 20 Pair 0.75mm² Black20020P001.5CBK 20 Pair 1.5mm² Black



CABLE


Bs5308 (Part 2, Type 2) Individually & Collectively Screened Instrumentation Cable - Flame Retardant - Armoured

Bs5308 (Part 1, Type 1) Collectively Screened Instrumentation Cable - Flame Retardant - Unarmoured

Technical: • Construction: Plain annealed copper conductors(*), PVC insulation - twisted to form a pair(s), individual and collective Aluminium-polyester foil tape screens c/w tinned cop per drain wire(s), PVC bedding, galvanized steel wire armour, Flame Retardant PVC sheath. *0.5mm² and 0.75mm² versions are flexible. 1.0mm² version is stranded • Voltage Rating: 300/500 Volts • Temperature Range: -0°C to +50°C for installation -20°C to +70°C for operation • Relevant Standards: BS5308 Part 2 Type 2 for construction BS EN 60228 Class 2 and Class 5 as appropriate for conductors BS7655 Type TI1 for insulation BS7655 Type TM1 for bedding BS EN 10257-1 for galvanized steel wire armour BS7655 for PVC sheath BS4066 Part 1 (IEC 60332 Part 1) for Flame Retardancy BS4066 Part 3 Category C (IEC 60332 Part 3 Category C) for Flame Retardancy

Individually screened instrumentation cable available on request

Technical: • Construction: Plain annealed copper conductors(*), Polyethylene insulation - twisted to form a pair(s), collective Aluminium-polyester foil tape screen c/w tinned copper drain wire(s), Flame Retardant PVC sheath. *0.5mm² and 0.75mm² versions are flexible. 1.0mm² version is stranded • Voltage Rating: 300/500 Volts • Temperature Range: -0°C to +50°C for installation -20°C to +70°C for operation • Relevant Standards: BS5308 Part 1 Type 1 for construction BS/EN 60228 Class 2 and Class 5 as appropriate for conductors BS6234 Type 03 for insulation BS7655 for PVC sheath BS4066 Part 1 (IEC 60332 Part 1) for Flame Retardancy BS4066 Part 3 Category C (IEC 60332 Part 3 Category C) for Flame Retardancy



Code Core Conductor Colour17001P000.5CBK 1 Pair 0.5mm² Black17001P00.75CBK 1 Pair 0.75mm² Black17001P001.5CBK 1 Pair 1.5mm² Black17001Q000.5CBK 2 Pair (Quad) 0.5mm² Black17001Q00.75CBK 2 Pair (Quad) 0.75mm² Black17001Q001.5CBK 2 Pair (Quad) 1.5mm² Black17005P000.5CBK 5 Pair 0.5mm² Black17005P00.75CBK 5 Pair 0.75mm² Black


Further sizes available - please call for details. Full technical data sheet available on request. Low smoke & fume versions available.

Further sizes available - please call for details. Full technical data sheet available on request.

INSTRUMENTATION CABLE - UNARMOURED


BS5308 (Part 2, Type 1) Collectively Screened Instrumentation Cable - Flame Retardant - Unarmoured

SY Wire Braided / PVC Transparent

Individually screened instrumentation cable available on request

Technical: • Construction: Plain annealed copper conductors(*), PVC insulation - twisted to form a pair(s), collective Aluminium-polyester foil tape screen c/w tinned copper drain wire(s), PVC bedding, Flame Retardant PVC sheath *0.5mm² and 0.75mm² versions are flexible. 1.0mm² version is stranded • Voltage Rating: 300/500 Volts • Temperature Range: -0°C to +50°C for installation -20°C to +70°C for operation • Relevant Standards: BS5308 Part 2 Type 1 for construction BS/EN 60228 Class 2 and Class 5 as appropriate for conductors BS7655 Type TI1 for insulation BS7655 Type TM1 for bedding BS4066 Part 1 (IEC 60332 Part 1) for Flame Retardancy BS4066 Part 3 Category C (IEC 60332 Part 3 Category C) for Flame Retardancy

• Triple protection to resist hostile environments • Transparent PVC outer sheth • Tinned steel wire braid provides high degree of mechanical strength and electrical scrrening • Numbered cores

Technical: • Construction: Plain annealed flexible copper conductors, PVC insulated (powder lubricated), PVC bedding (extruded), galvanized steel wire braid, PVC sheath – Transparent • Voltage Rating: 300/500 Volts • Temperature Range: -5°C to +80°C for flexing -40°C to + 80°C for fixed installation • Relevant Standards: DIN VDE 0245,0281,0293,0295 for construction BS/EN 60228 Class 5 for conductors IEC 60332-1 for Flame Retardancy

Code Core Conductor Colour18001P000.5CBK 1 Pair 0.5mm² Black18001P00.75CBK 1 Pair 0.75mm² Black18001P001.5CBK 1 Pair 1.5mm² Black

Code Core Conductor Colour18005P000.5CBK 5 Pair 0.5mm² Black18005P00.75CBK 5 Pair 0.75mm² Black18005P001.5CBK 5 Pair 1.5mm² Black

Code CMA Ref Core Conductor Colour45002C00.75XCL SY 2 0.75mm² Grey45002C001.0XCL SY 2 1.0mm² Grey45002C001.5XCL SY 2 1.5mm² Grey45002C002.5XCL SY 2 2.5mm² Grey45002C004.0XCL SY 2 4.0mm² Grey45003C00.75XCL SY 3 0.75mm² Grey45003C001.0XCL SY 3 1.0mm² Grey45003C001.5XCL SY 3 1.5mm² Grey45003C002.5XCL SY 3 2.5mm² Grey45003C004.0XCL SY 3 4.0mm² Grey45003C006.0XCL SY 3 6.0mm² Grey45004C00.75XCL SY 4 0.75mm² Grey45004C001.0XCL SY 4 1.0mm² Grey45004C001.5XCL SY 4 1.5mm² Grey45004C002.5XCL SY 4 2.5mm² Grey

Code CMA Ref Core Conductor Colour45004C004.0XCL SY 4 4.0mm² Grey45004C006.0XCL SY 4 6.0mm² Grey45005C00.75XCL SY 5 0.75mm² Grey45005C001.0XCL SY 5 1.0mm² Grey45005C001.5XCL SY 5 1.5mm² Grey45005C002.5XCL SY 5 2.5mm² Grey45005C004.0XCL SY 5 4.0mm² Grey45005C006.0XCL SY 5 6.0mm² Grey45007C00.75XCL SY 7 0.75mm² Grey45007C001.0XCL SY 7 1.0mm² Grey45007C001.5XCL SY 7 1.5mm² Grey45007C002.5XCL SY 7 2.5mm² Grey45007C004.0XCL SY 7 4.0mm² Grey45007C006.0XCL SY 7 6.0mm² Grey

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

xxxx

xxxx

xxxx

xxxx

xxxxxxxxxx

Further sizes available - please call for details. Full technical data sheet available on request. Low smoke & fume versions available.


MULTICORE CONTROL CABLE

CABLE


YY - PVC/PVC GREY • Grey sheath control cable, unbraided • Numbered Cores

Technical: • Construction: Plain annealed flexible copper conductors, PVC insulation, (powder lubricated), PVC Sheath – Grey • Voltage Rating: 300/500 Volts • Temperature Range: -5°C to +80°C for flexing -40°C to +80°C for fixed installation • Relevant Standards: DIN VDE 0245,0281,0293,0295 for construction BS/EN 60228 Class 5 for conductors DIN VDE 0281 Part 1 and HD 21.1 for sheath material IEC 60332-1 for Flame Retardancy

Code CMA Ref Core Conductor Drum44002C00.75XGR YY 2 0.75mm² Grey44002C001.0XGR YY 2 1.0mm² Grey44002C001.5XGR YY 2 1.5mm² Grey44002C002.5XGR YY 2 2.5mm² Grey44002C004.0XGR YY 2 4.0mm² Grey44003C00.75XGR YY 3 0.75mm² Grey44003C001.0XGR YY 3 1.0mm² Grey44003C001.5XGR YY 3 1.5mm² Grey44003C002.5XGR YY 3 2.5mm² Grey44003C004.0XGR YY 3 4.0mm² Grey44003C006.0XGR YY 3 6.0mm² Grey44004C00.75XGR YY 4 0.75mm² Grey

Code CMA Ref Core Conductor Drum44004C001.0XGR YY 4 1.0mm² Grey44004C001.5XGR YY 4 1.5mm² Grey44004C002.5XGR YY 4 2.5mm² Grey44004C004.0XGR YY 4 4.0mm² Grey44004C006.0XGR YY 4 6.0mm² Grey44005C00.75XGR YY 5 0.75mm² Grey44005C001.0XGR YY 5 1.0mm² Grey44005C001.5XGR YY 5 1.5mm² Grey44005C002.5XGR YY 5 2.5mm² Grey44005C004.0XGR YY 5 4.0mm² Grey44005C006.0XGR YY 5 6.0mm² Grey


H07RN-F Rubber Flexible Cable to BS7919

Technical: • Construction: Plain annealed flexible copper conductors, Thermosetting rubber insulation (EL7), Thermosetting rubber outer sheath, (EM2) Black • Voltage Rating: 450/750 Volts • Temperature Range: -25°C to +90°C for operation • Relevant Standards: HD22.1/IEC 60245-4 construction, IEC 60228 Class 5 for conductors, HD22 Type EL7 for insulation, HD22 Type EM2 for sheath, IEC 60332-1 for Flame Retardancy

Code Core Conductor Drum38001C035.0XBK 1 35.0mm² 100m38001C050.0XBK 1 50.0mm² 100m38001C070.0XBK 1 70.0mm² 100m38001C095.0XBK 1 95.0mm² 100m38001C120.0XBK 1 120.0mm² 100m38001C150.0XBK 1 150.0mm² 100m38001C185.0XBK 1 185.0mm² 100m38001C240.0XBK 1 240.0mm² 100m38002C001.5XBK 2 1.5mm² 100m38002C002.5XBK 2 2.5mm² 100m38002C004.0XBK 2 4.0mm² 100m38003C001.0XBK 3 1.0mm² 100m38003C001.5XBK 3 1.5mm² 100m38003C002.5XBK 3 2.5mm² 100m38003C004.0XBK 3 4.0mm² 100m38003C006.0XBK 3 6.0mm² 100m

Code Core Conductor Drum38003C010.0XBK 3 10.0mm² 100m38003C016.0XBK 3 16.0mm² 100m38004C001.5XBK 4 1.5mm² 100m38004C002.5XBK 4 2.5mm² 100m38004C004.0XBK 4 4.0mm² 100m38004C006.0XBK 4 6.0mm² 100m38004C010.0XBK 4 10.0mm² 100m38004C016.0XBK 4 16.0mm² 100m38005C001.0XBK 5 1.0mm² 100m38005C001.5XBK 5 1.5mm² 100m38005C002.5XBK 5 2.5mm² 100m38005C004.0XBK 5 4.0mm² 100m38005C006.0XBK 5 6.0mm² 100m38005C010.0XBK 5 10.0mm² 100m38005C016.0XBK 5 16.0mm² 100m

RUBBER FLEXIBLE CABLE

Designed to provide high flexibility and have the capacity to withstand weather, oils/greases, mechanical and thermal stresses.Applications include handling equipment, mobile power supplies, worksites, stage and audio visual equipment, port areas and dams. Also for use in drainage and water treatment, cold environments and severe industrial environments.


Single Core Flexible Copper PVC Insulated CableFor use in appliances, switch relay and instrument panels for switchgear, motor starters and controllers. Flexible stranded single core copper conductor.

Technical: • 105°C PVC Insulated • To BS6231, UL and CSA approved

Substitute * with Colour Code Required BL - Black BU - Blue BR - Brown EY - Green/Yellow GR - Grey OR - Orange PI - Pink RD - Red VI - Violet WH - White YW - Yellow

Code Core Conductor Drum Size43001C000.5X* 1 0.5mm² 100m43001C00.75X* 1 0.75mm² 100m43001C001.0X* 1 1.0mm² 100m43001C001.5X* 1 1.5mm² 100m43001C002.5X* 1 2.5mm² 100m43001C004.0X* 1 4.0mm² 100m43001C006.0X* 1 6.0mm² 100m43001C010.0X* 1 10.0mm² Per Meter43001C016.0X* 1 16.0mm² Per Meter43001C025.0X* 1 25.0mm² Per Meter43001C035.0X* 1 35.0mm² Per Meter43001C050.0X* 1 50.0mm² Per Meter43001C070.0X* 1 70.0mm² Per Meter

TRI- RATED CABLE

R&M SPECIALIST CABLES DIVISIONOur Cables Division can supply all types of cables be it instrumentation, power,control, telecommunication or data cables to anywhere in the world

For more information please conatct us (details on back page)

CABLE CLEATS & CABLE FIXINGS

CABLE MARKING

CABLE BANDING

EARTHING EQUIPMENT& ACCESSORIES

JOINT & CABLEABANDONMENT KITS

CABLE JACKS & ROLLERS

CABLE ACCESSORIES

Prysmian - Bicon Multistrap™ System

Prysmian - Bicon Multicleat™ System

Trefoil Cable Diameter (mm)Code - Standard Code - Heavy Min Max377AB01 377AB51 24 34377AB02 377AB52 30 41377AB03 377AB53 37 47377AB04 377AB54 43 54377AB05 377AB55 50 60377AB06 377AB56 56 67377AB07 377AB57 63 73377AB08 377AB58 69 80- 377AB39 85 110

Trefoil Cable Diameter (mm)Code - Standard Code - Heavy Min Max378AB01 378AB51 24 34378AB02 378AB52 30 41378AB03 378AB53 37 47378AB04 378AB54 43 54378AB05 378AB55 50 60378AB06 378AB56 56 67378AB07 378AB57 63 73378AB08 378AB58 69 80- 378AB39 85 110

• Strap complete with a tensioning clip, securing pin and winding key • High corrosion resistant non-magnetic stainless steel • Intermediate restraint between Multicleats™ • May be used to bind cables together • Can be used for all types of cable routes

• Two strengths: Standard - Short circuit withstand test: 43.3kA RMS (114kA peak) Heavy Duty - Short circuit withstand test: 71.4kA RMS (184kA peak • Operating temperature: -60° to +100°C • LSF Liners available on request conforming to BS6853

• Constitutes a Multistrap™ with a base • Choice of bases: Aluminium Alloy, plain or epoxy coated, two fixings design Cast Iron, HDG or epoxy coated, two fixings design Stainless Steel, single or two fixings design

• Designed for securing cables in a single way, trefoil or bundled formation • Multistraps™ with either cast iron or stainless steel bases will survive an excursion to +1000°C for up to 2 hours

CABLE CLEATS & CABLE FIXINGS

CABLE MARKINGPartex - Markers Single Character

Code Size Range PackagingPA 02 Reel Dia 1.3 - 3.0mm, Ø 0.5 - 0.75mm2 1000 Piece ReelPA 02 Multi Dia 1.3 - 3.0mm, Ø 0.5 - 0.75mm2 1000 Piece Multi pack (5 x 200 loose)PA 02 Disc Dia 1.3 - 3.0mm, Ø 0.5 - 0.75mm2 500 Piece Compacta DiscPA 02 250 Pack Dia 1.3 - 3.0mm, Ø 0.5 - 0.75mm2 250 Piece Handy Pack (10 x 25 markers)PA1 Reel Dia 2.5 - 5.0mm, Ø 0.75 - 4.0mm2 1000 Piece ReelPA1 Multi Dia 2.5 - 5.0mm, Ø 0.75 - 4.0mm2 1000 Piece multi pack (5 x 200 loose)PA1 Disc Dia 2.5 - 5.0mm, Ø 0.75 - 4.0mm2 500 Piece Compacta DiscPA1 250 Pack Dia 2.5 - 5.0mm, Ø 0.75 - 4.0mm2 250 Piece Handy Pack (10 x25 markers)

Product Overview: •Closed, secure, marker sleeve for unconnected wires and cables •Designed for electrical, pneumatic, hydraulic etc., applications •High quality hot-foil marking •Unique profile with spring-action bellows covers a wide variety of diameters with a single marker size therefore reducing marker stock requirements •Designed to interlock when fitted, enabling easy alignment of multiple character markings •High environmental tolerance and excellent legibility

Specification: •Material: Cadmium-free soft PVC to special Partex formula •Colours: Black on white, black on yellow or to International resistor colour code, all ex-stock. Other colour combinations available to order •Print: Hot-foil stamped •Temperature: The shape is permanent between -30°C and +60°C •Properties: Self-extinguishing, good resistance to chemicals, Agamma and UV radiation •Standard Legends: 0-9, A-Z, +, -, /, earth, or blank. Special symbols available to order


CABLE ACCESSORIES


A marker designed to identify the increasing number of smaller diameter data, fibre-optic and telecommunication wires. Its revolutionary Y-profile makes it extremely easy to apply and also allows a large print area for such a small marker.

K-Type® markers are used to identify wire bundles, cables, pipes and conduits

Individual push-on characters used to identify wires and small cables permanently

•Fits cable diameters 1.0 - 2.0mm (0.2 - 0.7mm2) •Grips gently and so is ideal for delicate wires •Chevron cut means markers interlock and text is always easily readable

• Specially designed oval shaped with individual characters sliding onto a PVC carrier, which is then attached to the substrate using cable ties • Ideal for post termination applications or where retrofit is anticipated • Colour: Yellow markers with black characters (A - Z, 0 - 9 and symbols) • Standard international colour code option also available

• K-Type® markers come in one standard size to fit carrier strips that can hold from 7 to 18 markers • Material: Plasticized PVC • Temperature range: -40°C to +70°C

• Expanding profile, enabling each marker to accommodate a wide range of wire/cable sizes • Supplied either straight cut or chevron cut: the chevron cut option ensures the legends remain aligned • Standard Z-Type® markers are yellow or white with black legends • Color coded markers are also available • Resistant to sea water, fuels and oils

• 9 sizes are available covering wire diameters from1.5mm to 12.7mm (0.06 inches to 0.5 inches) • Temperature range: -45°C to +70°C • Colour: Straight: White or yellow markers with black characters (A - Z, 0 - 9 and symbols Chevron: White or yellow markers with black characters (A - Z, 0 - 9 and symbols). Color coded 0 to 9

Specification: •Material: Cadmium-free soft PVC to special Partex formula •Colours: Black on white, black on yellow or to International resistor colour code, all ex-stock. Other colour combinations available to order •Print: Hot-foil stamped •Temperature: The shape is permanent between -30°C and +60°C • Properties: Self-extinguishing, good resistance to chemicals, gamma and UV radiation •Standard Legends: 0-9, A-Z, +, -, /, earth, or blank. Special symbols available to order

Partex- PY Wire Marker

Tyco Electronics - Critchley K-Type®Markers

Tyco Electronics - Critchley Z-Type® Markers

Code For Cable Dia (mm) Marker Size Length (mm)1361/*/**/”*” 4.2 - 7.0 65 60

* - Packaging Code (1 = Reel) ** - Colour Code (4 = Yellow, 9 = White) “*” - Legend

Example Code: 136114”M”: Size 65 yellow marker with black legend “M”, reel

Carrier Strips Code Description11320000 Carrier Strip 7 Marker Capacity11310000 Carrier Strip 12 Marker Capacity11300000 Carrier Strip 18 Marker Capacity

Code - Code - For Cable For Cable Marker Code - MarkerStraight Cut Chevron Cut Dia (mm) Size (mm²) Size Applicator0615/*/**/”*” 1153/*/**/”*” 2.5 - 4.0 1.5 9 125200000616/*/**/”*” 1154/*/**/”*” 2.9 - 4.7 2.5 11 125300000617/*/**/”*” 1155/*/**/”*” 3.4 - 5.7 4.0 13 125400000618/*/**/”*” 1156/*/**/”*” 3.8 - 6.3 6.0 15 125500000620/*/**/”*” 1157/*/**/”*” 4.3 - 6.9 10.0 18 125600000622/*/**/”*” 1158/*/**/”*” 5.5 - 8.9 16.0 23 -0624/*/**/”*” 1159/*/**/”*” 7.9 - 12.7 25.0 35 -

* - Packaging Code (1 = Box, 2 = Reel) ** - Colour Code (4 = Yellow, 9 = White) “*” - Legend Example Code: 061614”M”: Size 11 yellow marker with black legend M, boxed

Code Size Range Packaging (Please Specify)PY 01 Ø 1.0 - 2.0mm, 0.2 - 0.7mm2 3mm 1000 Piece Reel / 250 Piece Handy Pack / 1000 Loose Strip Pack (5x200)


BAND-IT® - VALU-STRAP™ Plus Band

BAND-IT® - Bantam Tool

Code Size (W x T) (mm) Average Breaking Strength (Lbs)C19199 9.6 x 0.51 600C18189 12.7 x 0.51 850C17199 15.9 x 0.51 1000C16189 19.1 x 0.51 1275

Code DescriptionC07569 Bantam Tool

• 200/300 Stainless Steel • Economical and easy to install • Utilised in light duty and general use banding applications • BAND-IT® Valu-Strap offers light duty strength and can be formed to any shape and diameter • Used frequently for cable bundling, insulation, and hose bundling applications • 100’ Roll

• Use to apply BAND-IT® Band, BAND-FAST®, general use band and miscellaneous strapping • Compact, lightweight, ratchet action tool with built in cutter • 3 way handle adjusts for one or two-handed tensioning • Zinc plated for corrosion resistance • Useful in tight areas with minimal access • Designed for easy loading and removing of material

CABLE BANDINGBAND-IT® - Valuband

BAND-IT® - VALU-STRAP™ Band

Code Size (W x T) (mm) Average Breaking Strength (Lbs)C14499 12.7 x 0.64 1000C14599 15.9 x 0.64 1250C14699 19.1 x 0.64 1590

Code Size (W x T) (mm) Average Breaking Strength (Lbs)C13199 4.8 x 0.38 280C13399 9.6 x 0.38 450C13499 12.7 x 0.38 600C13599 15.9 x 0.38 750C13699 19.1 x 0.38 900

• Stainless Steel • 100’ Roll • Also available in 200’ or 300’ rolls & mill coil

• Light duty stainless steel banding used in applications ranging from strapping to bundling • Thickness: 0.015”, 0.020”, 0.025” • May be 200 or 300 series Stainless Steel, typically non-magnetic • 100’ Roll • Also available in 200’ or 300’ rolls & mill coil

CABLE ACCESSORIES


BAND-IT® - Multi Lok Ties

Panduit - Pan-Steel® Self-Locking Cable Ties – MLT Series

Code Code Max Dia TensileCoated Uncoated Size (W x T) (mm) Single Wrap (mm) Strength lbsAE6119 AE6019 6.9 x 150 33 250AE6129 AE6029 6.9 x 225 57 250AE6139 AE6039 6.9 x 300 81 250AE6149 AE6049 6.9 x 450 129 250AE6159 AE6059 6.9 x 610 180 250

Panduit - Standard Cross SectionCode - 304 SS Code - 316 SS Length (mm) Width (mm) Max Bundle (OD mm)MLT1S-CP MLT1S-CP316 127 4.6 25MLT2S-CP MLT2S-CP316 201 4.6 51MLT4S-CP MLT4S-CP316 362 4.6 102MLT6S-CP MLT6S-CP316 521 4.6 152MLT8S-CP MLT8S-CP316 679 4.6 203

• UL Listed, CE Marked, DNV Approved • Self-locking ties • Available in two widths: 0.270” & 0.470” • Fast, easy application • Install by hand or with a variety of tools

• Unique multiple locking system • Coated with Nylon 11 or uncoated styles available • 316 SS

Features • Self-locking head design speeds installation and locks into place at any length along the tie body • Provides a strong, durable method of cable bundling • Can be used in a wide range of indoor, outdoor, and under ground (including direct burial) applications • Smooth surfaces and rounded edges assures cable protection and worker safety • Available in AISI 304 stainless steel for general-purpose applications • Available in AISI 316 stainless steel for the most corrosive environments

Technical: • Material: Type 304 or 316 stainless steel • Temperature range: -112°F (-80°C) to 1000°F (538°C) • Water absorption: None • Flammability: Non-flammable • Ultraviolet resistance: Excellent • Chemical resistance: Excellent • Radiation resistance: 2 x 108 rads • Loop tensile strength range: 200-900 lbs. (890-4005N) • Fully rounded edges and smooth surfaces • Estimated outdoor service life of 40 years

The Pan-Steel® system provides a strong durable method of bundling and fastening. Stainless steel cable ties can be used in virtually all indoor, outdoor and underground (including direct burial) applications. They are especially well suited for network bundling of data and power cables. Their high strength, non-flammability, fully rounded edges and exclusive easy thread lead-in design provide the ultimate support for network cables.

BAND-IT® - AE Series 316 Stainless Steel Ties

Max Dia TensileCode Size (W x L) (mm) Single Wrap (mm) Strength LbsAE1118 6.4 x 152 38 75/300AE1128 6.4 x 229 63 75/300AE1138 6.4 x 305 86 75/300AE1148 6.4 x 457 137 75/300AE1158 6.4 x 610 185 75/300

The Reusable Stainless Steel Cable Tie • Constructed of 316 Stainless Steel with PPA571 coating • PPA 571 is resistant to stress cracking, adverse weather conditions, detergents, salt spray and typical airbourne pollutants • One-piece construction with unique buckle designs capable of double wrapping for special strength requirements and reliable installation • DNV Approved

CABLE TIES


Panduit - Light-Heavy Cross Section

Code - 304 Code - 316 Length (mm) Width (mm) Max Bundle (OD mm)MLT2LH-LP MLT2LH-LP316 201 6.4 51MLT4LH-LP MLT4LH-LP316 362 6.4 102MLT6LH-LP MLT6LH-LP316 521 6.4 152MLT8LH-LP MLT8LH-LP316 679 6.4 203

Panduit - Heavy Cross Section Code - 304 Code - 316 Length (mm) Width (mm) Max Bundle (OD mm)MLT2H-LP MLT2H-CP316 201 7.9 51MLT4H-LP MLT4H-CP316 362 7.9 102MLT6H-LP MLT6H-CP316 521 7.9 152MLT8H-LP MLT8H-CP316 679 7.9 203

Panduit - Nylon 11 Selectively Coated AISI 316 Stainless Steel Code - 316 Length (mm) Width (mm) Max Bundle (OD mm)MLTC2H-LP316 201 7.9 51MLTC4H-LP316 362 7.9 102MLTC6H-LP316 521 7.9 152MLTC8H-LP316 679 7.9 203

Standard Cross SectionCode - 316 Length (mm) Width (mm) Max Bundle (OD mm) ColourMLTFC2S-CP316 201 4.6 51 BlackMLTFC4S-CP316 362 4.6 102 BlackMLTFC6S-CP316 521 4.6 152 BlackMLTFC8S-CP316 679 4.6 203 Black

Heavy Cross SectionCode - 316 Length (mm) Width (mm) Max Bundle (OD mm) ColourMLTFC2H-LP316 201 7.9 51 BlackMLTFC4H-LP316 362 7.9 102 BlackMLTFC6H-LP316 521 7.9 152 BlackMLTFC8H-LP316 679 7.9 203 BlackOther colours available - Red, Yellow, Blue, White, Green - please call for details

Panduit - Pan-Steel® Polyester Fully Coated Cable Ties – MLTFC Series • Polyester coating available in six color options provides visual indication for easy identification in color-coding applications (heavy cross section only) • Self-locking head design speeds installation and locks into place at any length along the tie body • Polyester coating provides additional edge protection and prevents corrosion between dissimilar metals • AISI 316 stainless steel for the most corrosive environments • Available in standard, heavy, extra-heavy and super-heavy cross sections • UV resistant, low smoke, halogen-free material • Temperature tolerance -40°F (-40°C) to 302°F (150°C

CABLE ACCESSORIES


Used with standard, light-heavy, heavy and extra-heavy cross section Pan-Steel® type MLT ties, type MLTC/MLTFC coated ties, and type MLTDH double wrapped ties.

• Cable tie side entry for immediate positioning of tie and tool • One hand operation – lightweight • Easy removal of excess tie • Tool tension is controlled by installer – twist action cut-off • Rugged, lightweight, easy-to-operate pliers-type tool provides mechanical advantage

Used to secure wires and cables in pre-drilled panels, cabinets or frames. Can be used when only one side of the panel is accessible. The mount is inserted into a pre-drilled hole and locks in place which speeds installation due to the elimination of a screw.

• 304 Stainless Steel • No tapping required • Used where only one side of the panel is accessible • Nothing to assemble • For use with standard, light-heavy and heavy cross section Pan-Steel® Ties

Code DescriptionMPWM-H56-Q Stainless Steel Push-Winged Tie Mount

Code DescriptionMTM2H-Q Stainless Steel Two-Way Mount

Code DescriptionST2MT Installation ToolKT2MG Replacement Tension Gripper

Code DescriptionGS4MT Installation ToolK4MTG Replacement Tension GripperK4M-BLD Replacement Cutter Blade

Panduit - Tie Mount - Push-winged - Stainless Steel

Panduit - Tie Mount - Two-Way - Stainless Steel

Panduit - Installation Tool

Panduit - Installation Tool - Hand Operated

For use with standard, light-heavy and heavy cross section Pan-Steel® Ties. Two-way mount allows stainless steel cable ties to be inserted from either of two sides providing a low profile attachment with only 1 hole for maximum holding and stability.

• 304 Stainless Steel • Allows stainless steel cable ties to be inserted from either of two sides • Low profile • Single hole center mounting for maximum holding and stability • Maximum screw head height .09 inch (2.3mm)

Used with standard, light-heavy, and heavy stainless steel cross section type MLT ties, type MLTC/MLTFC coated ties, and type MLTDH double wrapped ties.

• Single handle operation for fast installation • Cable tie side entry for immediate positioning of tie and tool • Controlled tension, fully adjustable • Easy removal of excess tie • Qualified product listed per SAE Standard MS90387-3 • Automatically tensions and cuts off tie when predetermined tension is reached, providing more reliable and consistent installations • Installs standard .18 inch (4.6mm), light-heavy .25 inch (6.4mm) and heavy .31 inch (7.9mm) cross section ties

CABLE TIE MOUNTS


EARTHING EQUIPMENT & ACCESSORIESFurse - Earth Bars

Furse - Earth Rods - Copperbond

Furse - Earth Bars with Twin Disconnecting Links

Furse - Earth Bar Insulator

Furse - Earth Bonds

Code Description Dims (L x W x H) (mm)LK245-6 6 Way 400 x 90 x 90LK245-8 8 Way 500 x 90 x 90LK245-10 10 Way 650 x 90 x 90LK245-12 12 Way 750 x 90 x 90LK245-14 14 Way 850 x 90 x 90LK245-16 16 Way 950 x 90 x 90LK245-18 18 Way 1050 x 90 x 90

Code Description Dims (L x W x H) (mm)LK245-20 20 Way 1200 x 90 x 90LK245-22 22 Way 1300 x 90 x 90LK245-24 24 Way 1400 x 90 x 90LK245-26 26 Way 1500 x 90 x 90LK245-28 28 Way 1650 x 90 x 90LK245-30 30 Way 1750 x 90 x 90

DimsCode Description (L x W x H) (mm)LK207-6 6 Way 550 x 90 x 96LK207-8 8 Way 650 x 90 x 96LK207-10 10 Way 800 x 90 x 96

DimsCode Description (L x W x H) (mm)LK207-12 12 Way 900 x 90 x 96LK207-14 14 Way 1000 x 90 x 96 LK207-20 20 Way 1350 x 90 x 96

Code - Nominal LengthThreaded Rod Dia (mm)RB205 5⁄8” 1200RB210 5⁄8” 1500RB235 5⁄8” 3000RB335 3⁄4” 3000

Code - Nominal LengthUn-threaded Rod Dia (mm)RB005 9.0mm 1200RB107 12.7mm 1500RB203 14.2mm 1200

FittingsCode DescriptionCG270 5⁄8” CouplingCG370 3⁄4” Coupling

Code DescriptionST200 5⁄8” Driving StudST300 3⁄4” Driving Stud

Code DescriptionCG177 12.7mm CouplingCG277 14.2mm Coupling

Code DescriptionST107 12.7mm Driving head

Code DescriptionIN005 With 2 Studs and 3 Nuts

Code DescriptionIN013 Insulator Only

Code DescriptionBN175 Copper Pipe Bond 50 - 200mmBN505 Flexible Copper Braid Bond - 25 x 0.5mm, 200mm Hole CentresBN510 Flexible Copper Braid Bond - 25 x 0.5mm, 400mm Hole Centres

• Plastic channel base is entirely corrosion proof • Light and easy to handle • Pre-drilled fixing holes for ease of installation

• Swan-Neck accessory, to facilitate the main earth bar connection • Furse can manufacture special earth bars and disconnecting links to meet individual requirements

• Molecular bonded 99.9% pure electroytic copper on low carbon steel core • High tensile strength • Copper thickness a minimum of 250 microns

Furse - Earth Rods - Stainless Steel

Code DescriptionRS005 Stainless Steel Rod - 16mm Dia x 1200mmST010 15mm Driving StudSP010 15mm SpikeRS005-KIT Stainless Steel Rod Kit (2 x Rods, Coupling Dowel, Drive Stud, Spike)

• Used to overcome problems caused by galvanic corrosion which can take place between dissimilar metals buried in close proximity • Highly resistant to corrosion

CABLE ACCESSORIES


Furse - Earth Rod Clamps

Furse - Inspection Pit - Concrete

Furse - Inspection Pit - Light Weight

Furse - Tape Conductors

Code DescriptionPT005 Concrete Inspection Pit

Code DescriptionPT205 Grey Inspection Pit

Code DescriptionCSCAK/1 Accomodates Cable Diameter 12 - 18mm²CSCAK/2 Accomodates Cable Diameter 18 - 25mm²CSCAK/3 Accomodates Cable Diameter 25 - 42mm²CSCAK/4 Accomodates Cable Diameter 42 - 55mm²CSCAK/5 Accomodates Cable Diameter 56 - 81mm²

Code Description Colour Dims (W x H)mmTC030 Bare Copper Tape x 25m - 40 x 3TC110 PVC Covered Copper Tape x 25m Green 25 x 3TC111-FU PVC Insulated Copper Tape x 25m Green & Yellow 25 x 3

Code Description Nominal Rod Dia Max. ConductorCR105 Rod to Tape Clamp (Type A) 1⁄2”/12.7mm 26 x 12mmCR105 Rod to Tape Clamp (Type A) 5⁄8”/6mm 26 x 12mmCR105 Rod to Tape Clamp (Type A) 3⁄4”/20mm 26 x 10mmCR515* Rod to Cable Clamp (Type G) 5⁄8”/16mm 16 - 70mm²CR520* Rod to Cable Clamp (Type G) 3⁄4”/20mm 35 - 95mm²CR525 Rod to Cable Clamp (Type G) 1”/25mm 70 - 120mm²CR205 Rod to Cable Lug Clamp (Type B) 3⁄8”/9.5mm CopperbondCR215 Rod to Cable Lug Clamp (Type B) 5⁄8”/16mm Copperbond* Suitable for use with 8mm Ø solid circular copper conductor

• Corrosion resistant, high conductivity and mechanical strength • High Strength copper alloy bodies and screws - no commercial brass is used

• Pit Weight 30kg, load rating 4,500kg • Suitable for most types of earthing and lighting protection installations • Not suitable for use in areas where high load, small wheel vehicles are used. The Lightweight inspection pit (PT205) is recommended for this type of application

• Lightweight pit weight 1.8kg, and is load rated to 5,000kg. • Lockable lid • Integral Earth bar available as an optional extra • Manufactured from high-performance polymer, the lightweight pit is UV stable and chemically resistant

3M - Cable Abandoment KitsComplete solution to abandon cables either temporarily or permanently. Environmental sealing and mechanical protection is provided using 3M Cold Shrink Technology, eliminating the need for heat and special tools, making a quick, simple and reliable installation. 3M Cold ShrinkTM cable abandonment kits are supplied in complete kit form to enable to abandonment of live power cables (up to 3.3kV), either temporarily or permanently.

Designed for: Single & multi core LV power cables up to and including 1.9/3.3kV.Cable types including XLPE/PVC Insulation, with or without lead sheath and/or armour. Suitable for ship wiring and offshore cables

Suitable for use in Zone 1 & 2 in Hazardous Areas

JOINT & CABLE ABANDONMENT KITS


Code DescriptionSH506W Gel Insulated Straight Joint 0.6/1kV Kit Up To 5 Cores from 1.5 to 6mm²SH525W Gel Insulated Straight Joint 0.6/1kV Kit Up To 4 Cores from 6 to 16mm²SH0325W Gel Insulated Straight Joint 3 Core c/w 3P 6Amp Terminal BlockSH0310W Gel Insulated Straight Joint 3 Core c/w 3P 13Amp Terminal BlockSH0316W Gel Insulated Straight Joint 3 Core c/w 3P 30Amp Terminal Block

3M - LV Cable Jointing Kits

Wiska - Shark®Water Tight Insulated Joints

Cross Sectional Area (mm²) MaximumCode 1 Core 2 Core 3 Core 4 Core Ø (mm)LVI-1/2-C NA 1.5 - 6 1.5 - 6 1.5 - 6 25LVI-1/3-C NA Oct-25 10 10 32LVI-1/3 50 - 70 NA NA NA 32LVI-1/4 95 - 150 35 16 - 25 16 - 25 36LVI-1/5 185 - 240 50 - 70 35 - 50 35 - 50 45LVI-1/6 300 - 630 95 - 150 70 - 95 70 54LVI-1/7 500 - 800 185 - 240 120 - 185 95 - 150 64LVI-1/8 NA 300 - 400 240 - 400 185 - 300 77

•One part mould construction - Quick simple installation •Top seal & fixing clips - Reduced chance of leakage •Range taking foam seals - No taping or sawing •Fully integrated resin delivery - Safer, cleaner installation

•Complete with 3M 2 part resin •Rated up to and including 1.9/3.3kV • Ideal for general purpose street lighting & service cable jointing

Gel insulated straight through joints for steel wire armoured or unarmoured PVC, XLPE, EPR cables.Features: •Re-enterable •No mixing and casting resins •Fast and easy installation •Reduced numbers of tools needed • Inter and non-toxic materials •No shelf life

Technical: •Flame protection: Glow wire test 750°C acc. To EN 60695-2-11 •Temperature range: -25°C to +50°C •Material: Polypropylene, reinforced glass fibre •Straight jointing 3 - 5 x 1.5 - 6mm²

CABLE JACKS AND ROLLERS

Min Drum Max DrumCode Description Capacity Diameter (mm) Diameter (mm)CDJ3 2 Jack legs and Spindle 3 Tonne 1060 1600 CDJ6 2 Jack legs and Spindle 6 Tonne 1360 1900

Min Drum Max DrumCode Description Capacity Diameter (mm) Diameter (mm)CDJH-3 Jack, Cable Drum 3 Tonne 3 Tonne 800 2500 Hydraulic, c/w SpindleCDJH-6 Jack, Cable Drum 6 Tonne 6 Tonne 880 3000 Hydraulic, c/w Spindle

SWA - Screw Jack Set

SWA - Hydraulic Jacks

•Screw type cable drum jacks are manufactured from fabricated steel •Fully approved - test certificates available on request •Spindles supplied with the jacks are manufactured from high quality steel bar •Lock-in collars can be provided on request

Code Description Max Cable CapacityTRP125 Cable Roller 125mm Diameter

SWA - Cable Rollers •Zinc plated •Suitable for cable up to 125mm dia

CMP CABLE GLANDS - INDUSTRIAL

HAWKE CABLE GLANDS - HAZARDOUS AREA

HAWKE CABLE GLANDS -INDUSTRIAL

HAWKE CABLE GLANDS - NORTH AMERICAN SERIES

PEPPERS CABLE GLANDS - HAZARDOUS AREA

PEPPERS CABLE GLANDS - INDUSTRIAL

WISKA CABLE GLANDS - HAZARDOUS AREA

RAXTON CABLE GLAND ACCESSORIES - Exd

RAXTON CABLE GLAND ACCESSORIES - Exe

CABLE GLANDS

Please see our Technical Section for Cable Gland & Cable Cleat Selection Charts

Pages 218-220

CMP - A2 SOLO LSF Industrial Cable Gland

CMP - BW Industrial Cable Gland

CMP - CW Industrial Cable Gland

Features: • Brass indoor cable gland • For use with all types of Single Wire Armour (SWA) cable • Providing mechanical cable retention and electrical continuity via armour wire termination • EMC Tested

Technical: • Certification: BS 6121:Part 1:2005 • Cable Gland Material: Brass, Electroless Nickel Plated Brass, Stainless Steel, Aluminium • Cable Type: Single Wire Armour (SWA), Aluminium Wire Armour (AWA) • Armour Clamping: Two Part Armour Lock

Features: • Brass indoor and outdoor cable gland kit for use with all types of Unarmoured cable • Providing a seal on the cable outer sheath • Provides both a sealing function and also mechanical cable retention • EMC Tested • Gland kit includes CMP SOLO LSF (Low Smoke & Fume) Halogen free shrouds & seals

Technical: • Certification: BS 6121:Part 1:1989, EN 50262:1999 • Operating Temperature Range: -60°C to +150°C • Ingress Protection Rating: IP66, IP67, IP68 • Deluge Protection Compliance: DTS01 : 91 • Cable Gland Material: Brass, Electroless Nickel Plated Brass, Stainless Steel, Aluminium • Seal Material: CMP SOLO LSF

Features: • Brass indoor and outdoor cable gland • For use with all types of Single Wire Armour (SWA) cable • Providing mechanical cable retention and electrical continuity via armour wire termination • EMC Tested

Technical:• Certification: BS 6121:Part 1:1989, EN 50262:1999• Operating Temperature Range: -60°C to +150°C• Ingress Protection Rating: IP66• Cable Gland Material: Brass, Electroless Nickel Plated Brass, Stainless Steel, Aluminium• Seal Material: CMP Formulated Thermoplastic Elastomer

Code20S16A2LSF2RA20A2LSF2RA20SA2LSF2RA25A2LSF2RA32A2LSF2RA40A2LSF2RA

Size (mm)20/162020 (S Type)253240

Code50A2LSF2RA50SA2LSF2RA63A2LSF2RA63SA2LSF2RA75A2LSF2RA75SA2LSF2RA

Size (mm)5050 (S Type)6363 (S Type)7575 (S Type)

Code Size (mm)20BW1AA 2020SBW1AA 20 (S Type)25BW1AA 2532BW1AA 32

Code Size (mm)40BW1AA 4050BW1AA 5050SBW1AA 50 (S Type)63BW1AA 63

Cable Gland Kit for use with all types of SWA cable, including 2 Brass Glands, 2 Steel Locknuts, 2 Brass Earth Tags and 2 PVC Shrouds for sizes up to and including 32mm. For sizes 40mm and above each kit includes 1 of each component.

Code Size (mm)20S16CW1RA 20/1620CW1RA 2020SCW1RA 20 (S Type)25CW1RA 25

Code Size (mm)32CW1RA 3240CW1RA 4050CW1RA 5063CW1RA 63

CMP CABLE GLANDS - INDUSTRIAL

Gland kit for use with all types of SWA cable including 2 Brass Glands, 2 Steel Locknuts, 2 Brass Earth Tags and 2 PVC Shrouds for sizes up to and including 32mm. For sizes 40mm and above each kit includes 1 of each component.


CABLE GLANDS


CMP - E1W Industrial Cable Gland

Hawke - 501/421 Cable Gland

Features: • Brass indoor and outdoor cable gland for use with Single Wire Armour (SWA) cable • Providing an environmental seal on the cable inner sheath and the cable outer sheath • EMC Tested

Technical: • Certification: BS 6121:Part 1:1989, EN 50262:1999 • Operating Temperature Range: -60°C to +150°C • Ingress Protection Rating: IP66 • Cable Gland Material: Brass, Electroless Nickel Plated Brass, Stainless Steel, Aluminium • Seal Material: CMP Formulated Thermoplastic Elastomer • Armour Clamping: Detachable Armour Cone & AnyWay Universal Clamping Ring • Sealing Technique: CMP Inner Displacement Seal & Unique CMP “LRS” TM Outer Load Retention Seal • Sealing Area(s): Cable Inner Bedding & Outer Cable Sheath

Features: • Provides a seal on the outer cable sheath • Intended for use on non-armoured elastomer and plastic insulated cables • May be used with braided cable where the braid and the cables outer sheath pass into the enclosure (the braid must be suitably terminated inside the enclosure)

Technical: • Flameproof Exd and Increased Safety Exe. ex logoII 2 GD ExtD A21 • Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22 • Suitable for use in Gas Groups IIA, IIB and IIC • Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529 & NEMA 4X • Deluge protection to DTS01 • Operating Temperature Range: -60°C to +100°C • Construction and Test Standards: EC/EN 60079-0, IEC EN 60079-1, IEC/EN 60079-7, IEC/EN 61241-0 and IEC/EN 61241-1

Material & Finishes: Brass (standard) - Nickel Plated Brass - 316 SS or Aluminium - Brass NPT entries are Nickel Plated as standard

Code Size (mm)20S16E1W1RA 20S/1620SE1W1RA 20 (S Type)20E1W1RA 2025SE1W1RA 25 (S Type)

Code Size (mm)25E1W1RA 2532E1W1RA 3240E1W1RA 4050E1W1RA 50

Code Size (mm)50SE1W1RA 50 (S Type)63SE1W1RA 63 (S Type)63E1W1RA 63

Code Size (mm)501/421/Os 20 (SS Type)501/421/O 20 (S Type)501/421/A 20

Code Size (mm)501/421/B 25501/421/C 32501/421/C2 40

Code Size (mm)501/421/D 50501/421/E 63501/421/F 75

HAWKE CABLE GLANDS - HAZARDOUS AREA

Full range of accessories and hazardous area glands available - please call for details


Hawke - 501/423 Cable Gland

Hawke - 501/453/RAC Cable Gland

Features: • Two independent seals on non-armoured elastomer and plastic insulated cables. The first is a flameproof seal on the inner or outer cable sheath, with an additional IP seal on the outer sheath • Provides superior cable retention to standard unarmoured cable glands, with seal at two independent points • May be used with braided cable where the braid and the cables outer sheath pass into the enclosure (the braid must be suitably terminated inside the enclosure) • Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22 • Suitable for use in Gas Groups IIA, IIB and IIC

Technical: • Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X • Deluge protection to DTS01 • Operating Temperature Range: -60°C to +100°C • Flameproof Exd and Increased Safety Exe. ex logoII 2 GD ExtD A21 • Baseefa Certificate No. Baseefa06ATEX0056X • IECEx Certificate No. IECEx BAS 06.0013X • Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, IEC/ EN60079-7, IEC/EN 61241-0 and IEC/EN 61241-1

Code Size (mm)501/423/Os 20 (SS Type)501/423/O 20 (S Type)501/423/A 20501/423/B 25501/423/C 32501/423/C2 40

Code Size (mm)501/423/D 50501/423/E 63501/423/F 75501/423/D 50501/423/E 63501/423/F 75

Code Size (mm)501/453/RAC/Os 20 (SS Type)501/453/RAC/O 20 (S Type)501/453/RAC/A 20501/453/RAC/B 25501/453/RAC/C 32

Code Size (mm)501/453/RAC/C2 40501/453/RAC/D 50501/453/RAC/E 63501/453/RAC/F 75

Features: • Outdoor or indoor use • For use with single wire armour ‘W’, wire braid ‘X’ and steel tape armour ‘Z’ elastomer and plastic insulated cables • Provides armour clamping using one clamping arrangement for all armour/braid types • Provides a seal on the cables inner sheath • Deluge protection option available • Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer sheath • Flameproof Exd and Increased Safety Exe • Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22 • Suitable for use in Gas Groups IIA, IIB and IIC

Technical: • Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X • Deluge protection to DTS01 (Deluge seal optional) • Operating Temperature Range: -60°C to +80°C • II 2 GD ExtD A21 • Baseefa Certificate No. Baseefa06ATEX0056X • IECEx Certificate No. IECEx BAS 06.0013X • Construction and Test Standards: IEC/EN 60079-0, IEC/ EN 60079-1, IEC/EN 60079-7, IEC/EN 61241-0 and IEC/EN 61241-1

CABLE GLANDS


Hawke - 501/453 Universal Cable Gland

Hawke - ICG 653 Universal Cable Gland

Code Size (mm)501/453/UNIV/Os 20 (SS Type)501/453/UNIV/O 20 (S Type)501/453/UNIV/A 20501/453/UNIV/B 25501/453/UNIV/C 32

Code Size (mm)501/453/UNIV/C2 40501/453/UNIV/D 50501/453/UNIV/E 63501/453/UNIV/F 75

Code Size (mm)ICG653/UNIV/Os 20 (SS Type)ICG653/UNIV/O 20 (S Type)ICG653/UNIV/A 20ICG653/UNIV/B 25ICG653/UNIV/C 32

Code Size (mm)ICG653/UNIV/C2 40ICG653/UNIV/D 50ICG653/UNIV/E 63ICG653/UNIV/F 75

Features: • Outdoor or indoor use • For use with single wire armour ‘W’, wire braid ‘X’ and steel tape armour ‘ Z’ elastomer and plastic insulated cables • Provides armour clamping using one clamping arrangement for all armour/braid types • Provides a diaphragm seal on the cables inner sheath which will not damage cable that has ‘cold flow’ characteristics • Provides an outer deluge seal to prevent moisture ingress to the cable armour/braid • Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer sheath • Flameproof Exd and Increased Safety Exe • Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22 • Suitable for use in Gas Groups IIA, IIB and IIC

Technical: • Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X • Deluge Protection to DTS01 • Operating Temperature Range: -60°C to +80°C • Exd IIC Gb, Exe IIC Gb, ExnR IIC Gc, Extb IIIC Db • Baseefa Certificate No. Baseefa06ATEX0057X. For sizes Os - F • Baseefa Certificate No. Baseefa06ATEX0056X For sizes G - J • IECEx Certificate No. IECEx BAS 06.0014X. For sizes Os - F • IECEx Certificate No. IECEx BAS 06.0013X. For Sizes G - J • Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7, IEC/EN 60079-15, IEC/EN 61241-0 and IEC/EN 61241-1

Outdoor or indoor useFor use with single wire armour ‘W’, wire braid ‘X’ and steel tape armour ‘Z’ elastomer and plastic insulated cablesFor particular use with:-a) Cables that are not effectively filled, compact and/or circular, have tape bedding or have hygroscopic fillersb) Cables that exhibit ‘cold flow’ characteristicsc) Enclosures containing an ignition source in gas group IIC areas or containing an ignition source in a Zone 1 area and exceeding 2 litres in volume

Features: • Provides a barrier seal between the individual insulated cores within the cable and prevents entry of the product of an explosion into the cable • Assembly of the cable gland compresses and distributes the compound evenly to create a barrier seal at the point of entry into the enclosure • The compound chamber may be separated from the cured compound to ensure that the chamber has been effectively filled If required, external voids can be repaired • Provides armour clamping, using one clamping arrangement for all armour/braid types • Provides an outer deluge seal to prevent moisture ingress to the cable armour/braid • Provides cable retention and low smoke and fume, zero halogen seal onto the cables outer sheath • Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22 • Suitable for use in Gas Groups IIA, IIB and IIC

Technical: • Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X • Deluge protection to DTS01 • Operating Temperature Range: -60°C to +80°C • Exd IIC Gb, Exe II Gb, Extb IIIC Db • Baseefa Certificate No. Baseefa06ATEX0058X • IECEx Certificate No. IECEx BAS 06.0015X • Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7, IEC/EN 61241-0 and IEC/EN 61241-1


Features: • Provides a barrier seal between the individual insulated cores within the cable and prevents entry of the products of an explosion into the cable • Assembly of the cable gland compresses and distributes the compound evenly to create a barrier seal at the point of entry into the enclosure • The compound chamber may be separated from the cured compound to ensure that the chamber has been effectively filled If required, external voids can be repaired • Provides armour clamping, using one clamping arrangement for all armour/braid types • Provides a seal and an electrical bond on the cables lead inner sheath • Provides an outer deluge seal to prevent moisture ingress to the cable armour/braid • Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer sheath • Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22 • Suitable for use in Gas Groups IIA, IIB and IIC

Technical: • Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X • Deluge protection to DTS01 • Operating Temperature Range: -60°C to +80°C • Flameproof Exd and Increased Safety Exe ex logoII 2 GD ExtD A21 • Baseefa Certificate No. Baseefa06ATEX0058X • IECEx Certificate No. IECEx BAS 06.0015X • Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7, IEC/EN 61241-0 and IEC/EN 61241-1 • Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7, IEC/EN 61241-0 and IEC/EN 61241-1

Full range of accessories available - please call for details

Hawke - ICG 653 Universal L Cable Gland

Code Size (mm)ICG653/UNIV/Os/L 20 (SS Type)ICG653/UNIV/O/L 20 (S type)ICG653/UNIV/A/L 20ICG653/UNIV/B/L 25ICG653/UNIV/C/L 32

Code Size (mm)ICG653/UNIV/C2/L 40ICG653/UNIV/D/L 50ICG653/UNIV/E/L 63ICG653/UNIV/F/L 75

Code Size (mm)121/Os/M20 20 (SS type)121/O/M20 20 (S type)121/A/M20 20121/B/M25 25121/C/M32 32

Code Size (mm)121/C2/M40 40121/D/M50 50121/E/M63 63121/F/M75 75

Outdoor or indoor useFor use with single wire armour ‘W’, wire braid ‘X’ and steel tape armour ‘Z’ elastomer and plastic insulated cables with a lead inner sheathFor particular use with:-a) Cables that are not effectively filled, compact and/or circular, have tape bedding or have hygroscopic fillersb) Cables that exhibit ‘cold flow’ characteristicsc) Enclosures containing an ignition source in gas group IIC areas or containing an ignition source in a Zone 1 area and exceeding 2 litres in volume

HAWKE CABLE GLANDS - INDUSTRIAL

Hawke - 121 Cable GlandFeatures: • Outdoor or indoor use • For use with non-armoured elastomer and plastic insulated cables • Provides a cable retention seal onto the cables outer sheath • Construction and test standards: EN 50262 BS 6121 Part 1 Type A2

Technical: • Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529 • Deluge protection to DTS01 • Operating Temperature Range: -60°C to +100°C


CABLE GLANDS



Code Size (mm)151/RAC/Os/M20 20 (SS type)151/RAC/O/M20 20 (S type)151/RAC/A/M20 20151/RAC/B/M25 25151/RAC/C/M32 32

Code Size (mm)151/RAC/C2/M40 40151/RAC/D/M50 50151/RAC/E/M63 63151/RAC/F/M75 75

Code Size (mm)153/RAC/Os/M20/L 20 (SS type)153/RAC/O/M20/L 20 (S type)153/RAC/A/M20/L 20153/RAC/B/M25/L 25153/RAC/C/M32/L 32

Code Size (mm)153/RAC/C2/M40/L 40153/RAC/D/M50/L 50153/RAC/E/M63/L 63153/RAC/F/M75/L 75

Hawke - 151/RAC Cable Gland

Hawke - 153/RAC/L Cable Gland

Features: • Outdoor or indoor use • For use with single wire armour ‘W’, wire braid ‘X’, aluminium strip armour ‘Y’ and steel tape armour ‘Z’ elastomer and plastic insulated cables • Provides armour clamping using one clamping arrangement for all armour/braid types • Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer sheath

Features: • Outdoor or indoor use • For use with single wire armour ‘W’, wire braid ‘X’, aluminium strip armour ‘Y’ and steel tape armour ‘Z’ elastomer and plastic insulated cables with a lead inner sheath • Provides armour clamping using one clamping arrangement for all armour/braid types • Provides a seal and an electrical bond on the cables lead inner sheath • Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer sheath

Technical: • Ingress Protection: IP66 to IEC/EN 60529 • Deluge protection to DTS01 (Deluge seal optional) • Operating Temperature Range: -60°C to +100°C • Construction and test standards: EN 50262, BS 6121 : Part 1 Type CW, CX, CY and CZ

Technical: • Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X. • Deluge protection to DTS01 (Deluge seal optional). • Operating Temperature Range: -60°C to +80°C. • Construction and test standards: EN 50262, BS 6121 : Part 1 Type E2W, E2X, E2Y and E2Z.


Technical: • Suitable for use in: - Class 1, Division 1, Gas Groups A, B, C and D - Class 1, Zone 2, Gas Groups IIA, IIB and IIC - AExd IIC and AExe II Class 1, Zone 2 • Flameproof Exd, Increased Safety Exe ex logoII 2 GD and Restricted Breathing ExnR ex logoII 3G • Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC • Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X • Deluge protection to DTS01

• Operating Temperature Range: -50°C to +60°C (UL) and -60°C to +80°C (ATEX / IECEx) • UL Certificate E84941 • Sira Certificate No: Sira 06ATEX1295X • IECEx Certificate No: IECEx Sir 060082X • Construction and Test Standards: UL 2225, IEC/EN 60079-0, IEC/EN 60079-1, EC/EN 60079-7, IEC/EN 60079-15, IEC/EN 61241-0 and IEC/EN 61241-1 • Note: 753 cable glands are supplied dual ATEX/UL marked as standard

Code Size (Inch“)711/A ½711/B ¾711/C 1711/C2 1 ¼

Code Size (Inch“)711/D 2711/E 2 ½711/F 3

Code Size (Inch“)753/Os ½753/O ½753/A ½753/B ¾753/C 1

Code Size (Inch“)753/C2 1 ¼753/D 2753/E 2 ½753/F 3

Technical: • UL Listing No: E84940 • Suitable for use in: - Class 1, Division 1, Gas Groups A, B , C and D - Class 1, Zone 2, Gas Groups IIA, IIB and IIC - AExd IIC and AExe II Class 1, Zone 2 • Flameproof Exd, Increased Safety Exe ex logoII 2 GD and Restricted Breathing ExnR ex logoII 3G • Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC • Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X

• Deluge protection to DTS01 • Operating Temperature Range: -50°C to +60°C (UL) and -60°C to +80°C (ATEX / IECEx) • Sira Certificate No: Sira 06ATEX1295X • IECEx Certificate No: IECEx Sir 060082X • Construction and Test Standards: UL 2225, IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7, IEC/EN 60079-15, IEC/EN 61241-0 and IEC/EN 61241-1 • Note: 711 cable glands are supplied dual ATEX/UL marked as standard

HAWKE GLANDS - NORTH AMERICAN SERIES

Hawke - 711 Cable Gland/Connector


Features: • Outdoor or indoor use • For use with continuous corrugated aluminum, Metal Clad (MCHL) cable • Provides 360° armour grounding which is fully inspectable • Grounding device remains in contact with the cable when disassembled for inspection • Provides a barrier seal between the individual insulated cores within the cable and prevents entry of the products of an explosion into the cable

• Assembly of the cable gland/connector compresses and distributes the compound evenly to create a barrier seal at the point of entry into the enclosure • Provides an outer deluge seal to prevent moisture ingress to the cable armour and enclosure. Deluge seal is coloured red to indicate hazardous locations product • Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer jacket

Features: • Outdoor or indoor use • Provides a barrier seal between the individual insulated conductors within the cable and prevents entry of the products of an explosion into the cable • Assembly of the cable gland/connector compresses and distributes the compound evenly to effect a barrier seal at the point of entry into the enclosure

• For use with braid armoured marine shipboard jacketed or non-jacketed cable • Provides an outer deluge seal to prevent moisture ingress to the cable armour and enclosure. Deluge seal is coloured red to indicate hazardous locations product • Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer jacket


CABLE GLANDS


Example of Order Code: CR-1BCK1/NP/20/050NPT

Prefix CR Type of gland featuring “CROCLOCK®”, single orientation clamping 1 1 Neoprene Seals (1) - Silicone (3) - Neoprene/Lead (2) - Silicone/Lead (4) B B Brass (B) - Stainless Steel (S)Options R Reduced bore seal C PVC Shroud (C) - PCP Shroud (P) - LSOH Shroud (3) K OR V Locknut, Earth Tag & Nylon (K) or Fibre (V) IP Washer S Including serrated washer 1 Quantity per kit NP Nickel Plated (NP) - Zinc Plated (ZP)Sizes 20 Gland shell size 050NPT 1/2”NPT entry thread

Code Size (Inch“)755/Os ½755/O ½755/A ½755/B ¾755/C 1

Code Size (Inch“)755/C2 1 ¼755/D 2755/E 2 ½755/F 3

Technical: • Suitable for use in: - Class 1, Division 2, Gas Groups A, B , C and D - Class 1, Zone 2, Gas Groups IIA, IIB and IIC - AExd IIC and AExe II Class 1, Zone 2 • Flameproof Exd, Increased Safety Exe ex logoII 2 GD and Restricted Breathing ExnR ex logoII 3G • Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC • Ingress Protection: IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X • Deluge protection to DTS01

• Operating Temperature Range: -50°C to +60°C (UL) and -60°C to + 80°C (ATEX / IECEx) • UL Listing No: E84940 • Sira Certificate No: Sira 06ATEX1295X • IECEx Certificate No: IECEx Sir 060082X • Construction and Test Standards: UL 2225, IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7, IEC/EN 60079-15, IEC/EN 61241-0 and IEC/EN 61241-1 • Note: 755 cable glands are supplied dual ATEX/UL marked as standard


Peppers - CR1 Croclock® Series Cable Gland

Features: • Outdoor or indoor use • Provides a barrier seal between the individual insulated conductors within the cable and prevents entry of the products of an explosion into the cable • Assembly of the cable gland/connector compresses and distributes the compound evenly to create a barrier seal at the point of entry into the enclosure

• For use with armoured jacketed cable, as permitted by the NEC • Provides an outer deluge seal to prevent moisture ingress to the cable armour and enclosure. Deluge seal is coloured red to indicate hazardous locations product • Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer jacket

Features: • Designed for Steel Wire, Wire Braid, and Steel Tape armoured cable types • Provides an Ex d flameproof seal and is also certified Ex e increased safety • The CR1 has an integral O-ring seal to provide a full IP68 seal • Available in nickel plated brass and as an option in 316SS

• Certified to both North American and International applications • Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC • Features “CROCLOCK®”, a unique non reversible multi clamping system for wire (W), braid (X) and tape (Z) armoured cables • Available Sizes: M20-M100

Technical: • IP Rating: IP66 & IP68 (25 metres - 30 minutes), NEMA 4X & DTS01 1991 • Operating Temperature: Neoprene Seals -20°C to +85°C, Silicone Seals -60°C to +180°C • Materials: Brass or Stainless Steel

• Plating: Nickel - Zinc • Construction and Test Standards: EN 60079-0, EN 60079-1, EN 60079-7, EN 60079-15, EN 61241-0, EN 61241-1, IEC 60079-0, IEC 60079-1, IEC 60079-7, IEC 61241-0, IEC 61241-1 & IEC 60529


PEPPERS CABLE GLANDS - HAZARDOUS AREA


Example of Order Code: CR-CBCK1/NP/20/M20

Prefix CR-C Type of gland featuring “CROCLOCK®”, single orientation clamping, Compound (Barrier) Inner Seal & Silicone Elastomeric Outer Seal 2 For Lead Sheath CablesOptions B Brass (B) / Stainless Steel (S) R Reduced bore seal C PVC Shroud (C) - PCP Shroud (P) - LSOH Shroud (3) K or V Locknut, Earth Tag & Nylon (K) or Fibre (V) IP Washer S Including serrated washer 1 Quantity per kit NP Nickel Plated (NP) - Zinc Plated (ZP)Sizes 20 Gland shell size M20 M20 entry thread

Example of Order Code: A2LBFCK1/NP/20/050NPTPrefix A Type of gland featuring controlled displacement sealing 2 Neoprene Seals (2) - Silicone (3) - Neoprene/Lead (1) - Silicone/Lead (4) L Peppers lightweight design B Brass (B) / Stainless Steel (S) / Aluminium (A) F Multiple CertificationOptions C PVC Shroud (C) - PCP Shroud (P) - LSOH Shroud (3) K OR V Locknut & Nylon (K) or Fibre (V) IP Washer T Including earth tag S Including serrated washer 1 Quantity per kit NP Nickel Plated (NP) - Zinc Plated (ZP)Sizes 20 Gland shell size 050NPT 1/2”NPT entry thread

Single compression for any cable.

Peppers - CRC Croclock® Series Cable Gland

Peppers - Type A Cable Gland

Features: • Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22, Group I Mining, Gas Groups IIA, IIB, IIC and Dust Groups IIIA, IIIB, IIIC • Provides a compound barrier Ex d & IP seal on the cable inner cores, eliminating damage to cables that exhibit “cold flow” characteristics and an environmental seal on the outer sheath • Innovative barrier chamber provides a cable acceptance that is on average 17% greater than other designs

• Features “CROCLOCK®”, a unique non reversible multi clamping system for wire (W), braid (X) and tape (Z) armoured cables and Peppers T-1000, the sealing compound that enables a quick and easy installation • The gland maintains IP66 & IP68 to 100 metres and is deluge proof without the use of an additional seal or deluge boot

Features: • Provide a controlled pull resistant environmental displacement seal on the cable outer sheath, minimising damage to cables that exhibit “cold flow” characteristics • Maintaining IP66 & IP68 to 35 metres

• Deluge proof without the use of an additional seal or deluge boot • Supplied with an IP O-ring seal as standard on metric entry threads • Options are available for use with LSOH cables and extreme temperature applications

Technical: • IP Rating: IP66 & IP68 (100 metres - 7 Days), NEMA 4X & DTS01 1991 • Temperature: -60°C to +135°C • Materials: Brass or Stainless Steel • Plating: Nickel - Zinc

• Construction and Test Standards: EN 60079-0, EN 60079-1, EN 60079-7, EN 60079-15, EN 60079-31, IEC 60079-0, IEC 60079-1, 60079-7, IEC 60079-15, IEC 60079-31 & IEC 60529 • Compound: Peppers T-1000 Sealing Compound

Technical: • IP Rating: IP66 & IP68 (30 metres - 7 Days) • Operating Temperature: Neoprene Seals -30°C to +105°C Silicone Seals -70°C to +200°C

• Materials: Brass, Stainless Steel or Aluminium • Plating: Nickel - Zinc

PEPPERS CABLE GLANDS - INDUSTRIAL

CABLE GLANDS


Single compression for armoured cables

Double compression for armoured cables

Example of Order Code: C1WBECK1/NP/20/050NPTPrefix C Type of gland featuring armour specific clamping 1 Neoprene Seals (1) - Silicone (3) W SWA (W) / SWB (X) or STA (Z) B Brass (B) / Stainless Steel (S) IE Integral Earth E Ex e CertificationOptions R Reduced bore seal C PVC Shroud (C) - PCP Shroud (P) - LSOH Shroud (3) K OR V Locknut, Earth Tag & Nylon (K) or Fibre (V) IP Washer S Including serrated washer 1 Quantity per kit NP NP Nickel Plated (NP) - Zinc Plated (ZP)Sizes 20 Gland shell size 050NPT 1/2”NPT entry thread

Example of Order Code: E1WBFCK1/NP/20/050NPTPrefix E Type of gland featuring armour specific clamping 1 Neoprene Seals (1) - Silicone (3) - Neoprene/Lead (2) - Silicone/Lead (4) W SWA (W) / SWB (X) or STA (Z) B Brass (B) / Stainless Steel (S) IE Integral Earth F Multiple CertificationOptions R Reduced bore seal C PVC Shroud (C) - PCP Shroud (P) - LSOH Shroud (3) K OR V Locknut, Earth Tag & Nylon (K) or Fibre (V) IP Washer S Including serrated washer 1 Quantity per kit NP NP Nickel Plated (NP) - Zinc Plated (ZP)Sizes 20 Gland shell size 050NPT 1/2”NPT entry thread

Peppers - Type C Cable Gland

Peppers - Type E Cable Gland

Features: • Suitable for cables that exhibit “cold flow” characteristics, whilst providing an IP66 environmental seal on the cable outer sheath • Detachable armour specific clamping system for wire (W), braid (X) or tape (Z) armoured cables • “IE” version allows the gland to be used with HV cables where the fault load is greater than 10.4kA • Options are available for use with LSOH cables and extreme temperature applications

Features: • Certified Flameproof Ex d, Increased Safety Ex e & Restricted Breathing Ex nR • Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC • They provide a controlled Ex d & IP seal on the cable inner sheath and an environmental seal on the outer sheath and a detachable armour specific clamping system for wire (W), braid (X) or tape (Z) armoured cables

• Tested to IP66 and IP68 to 35 metres • Available with an IP O-ring seal on metric entry threads • “IE” version allows the gland to be used with HV cables where the fault load is greater than 10.4kA • Options are available for use with lead sheath, LSOH cables and extreme temperature applications

Technical: • IP Rating: IP66 • Operating Temperature: Neoprene Seals -30º° to +105º° Silicone Seals -70°C to +200°C

• Materials: Brass or Stainless Steel • Plating: Nickel - Zinc • Construction and Test Standards: EN50262, BS6212 & IEC60529

Technical: • IP Rating: IP66 & IP68 (35 metres - 7 days), NEMA 4X • Operating Temperature: Neoprene Seals -20°C to +85°C Silicone Seals -60°C to +180°C

• Materials: Brass or Stainless Steel • Plating: Nickel - Zinc • Construction and Test Standards: EN50262, BS6212 & IEC60529


Features: • Condensation water is reduced to a minimum • You can easily replace your standard cable gland with VentGLAND® • VentGLAND® is part of the WISKA SPRINT cable gland system and so can be combined with a variety of sealing inserts and cup nuts

Features: • Provide a means of connection between dissimilar thread forms or sizes • Standard adaptors have a hexagonal body • Where space is a critical factor adaptors can be offered with a round body with a diameter equal to the across flats dimension of the standard item

Features: • Effectively reduce the threaded entry diameter of an enclosure to accept a gland or fitting with a smaller thread • Reducers may also be supplied to accept smaller glands of alternative threads forms • Standard item has a hexagonal head • Where space is a critical factor reducers with a circular head can be offered having a diameter equal to the across flats dimension of the hexagonal head

Code Size (mm)EMSVG 20 20EMSVG 25 25EMSVG 32 32

Code Size (mm)EMSVG 40 40EMSVG 50 50EMSVG 63 63

Technical: • Protection class to EN 60 529: IP 68 to 0,6 bar • Protection class to DIN 40 050-T9: IP 69K • Temperature range: -40°C to 100°C , interm. up to approx. 120°C • Material: - Cable gland: brass nickel-plated - Clamping cage: polyamide - Gasket: EPDM - Membrane: ePTFE • Equipment: - A micro-porous, liquid-tight and breathable ePTFE membrane as an integrated element of the cable gland - Maximimum traction relief through WISKA patent lamella - Seal-tight to enclosure rack through additional EPDM sealing ring - Same sealing range on all SPRINT-glands - Also available with reduction insert, multiple sealing insert, special sealing insert and dust-protection gasket

WISKA CABLE GLANDS - HAZARDOUS AREA

RAXTON CABLE GLAND ACCESSORIES - Ex d

Wiska - VentGLAND® Sprint Cable Gland

Raxton - Ex d Adaptors

Raxton - Ex d Reducers

Instead of various ventilation or heating solutions, VentGLAND® offers you cable gland and pressure compensation in one. The cable gland has an integrated ePTFE membrane which literally lets the casing breathe and thus equalizes pressure differences. Condensation water is reduced to a minimum while dirt and water still can not penetrate the housing.

Please refer to our technical section on page 211 for thread identification and part numbering system

Available in brass, plastic and stainless steel. Full range of accessories available - please call for details

CABLE GLANDS


• A comprehensive range of Stopping Plugs designed to close any unused entries in electrical equipment without revoking existing certification • The range covers five design types: - Tamper Proof Plug Type CF: Inserted from the outside with the allen key towards the enclosure and then tightened from the inside to leave a flush finish to prevent unauthorised removal - RX Plug Type CB: Inserted with the allen key pointing away from the box and tightened from the outside - Hexagon Head Plug Type CK: Inserted from the outside and fastened by means of a spanner ,They can be fitted with a washer to increase the IP rating of the assembly - Dome Head Plug Type CQ: Can be offered as an alternative to the Hexagon Headed version - Hollow Hexagon Head Plug Type CY: A hollow version of the Hexagon Head Plug but still with Exd/Exe certification

Features: • Provide a means of connection between dissimilar thread forms or sizes • Certified Adaptors should be used following the basic rules in line with good engineering practice; - No more than one conversion Adaptor should be used at one time on any given cable entry - Stopping Plugs should be fitted directly into unused entries of the equipment and not into an Adaptor • Supplied with a hexagonal body as standard • Where space is a critical factor Adaptors with a round body can be offered the diameter is equal to the across flat dimensions of the hexagonal body • Nylon Adaptors are produced with a round body • Ex e Adaptors are supplied fitted with an ‘O’ ring to maintain the IP integrity of the installation

Technical - Ex d Accessories: • Quality: - SIRA (0518) 02 ATEX M207 - Bureau Veritas BS EN ISO 9001:2008 • Thread specification: - Isometric (ISO) to BS3643:1981 & ISO 965 Pts 1 & 3 - Imperial (ET) to BS31:1940 (1979) - National Pipe Thread (NPT) to ANSI/ASME:1983 - British Standard Pipe (BSP) to BS21:1985 - Pg to DIN 40430:1971 • Materials: - Brass: BS2874: 1985 CZ121 - Mild Steel: BS970 PT3 230M07 - Stainless Steel: BS970 PT3 316 S11 - Aluminium: BS1474/1 6082 T4 or T6 - Aluminium Bronze: BS1400 1985 AB2 or BS2874:1986 CA104 • Approvals: - Exd Reducers: - Sira 10ATEX1225X - IECEx SIR 07.0010X - CSA 200455-1003277 - GOST РОСС GB.ГБ06.В01060 - INMETRO NCC 12.0764U

• Plating: - Nickel, Electro Zinc, Zinc Passivated, Chromatised, Electroless Nickel and Anodised • Approvals - Exd Adaptors: - Sira 10ATEX1225X - IECEx SIR 07.0010X - CSA 200455-1003277 - GOST РОСС GB.ГБ06.В01060 - INMETRO NCC 12.0764U • Approvals - Exd Stopping Plugs: - Sira 10ATEX1224X - IECEx SIR 07.0009X - CSA 200455-1003277 - GOST РОСС GB.ГБ06.В01060 - INMETRO NCC 12.0764U • Temperature: These items are classified as a components and are therefore not given a temperature rating

Raxton - Ex d Stopping Plugs

Raxton - Ex e Adaptors

RAXTON CABLE GLAND ACCESSORIES - Ex e



Features: • Effectively reduce the threaded entry diameter of an enclosure to accept a gland or fitting with a smaller thread • Reducers may also be supplied to accept smaller glands of alternative threads • Following the basic rules in line with good engineering practices; - No more than one Reducer should be used at any one time - Stopping Plugs should be fitted directly into unused entries of the equipment and not into a Reducer • Brass Reducers are supplied with a hexagonal head as standard • Where space is a critical factor Adaptors with a circular head can be offered with a diameter equal to the across flats dimension of the hexagonal head • Nylon Reducers are designed with a circular head • Supplied with an ‘O’ ring to maintain the IP integrity of the installation

Features: • Designed to close any unused entries in electrical equipment • Available either with a mushroom head or a hexagonal head • Supplied complete with an ‘O’ ring to ensure that the IP rating of the installation is maintained • Raxton Plugs should be fitted directly into any tapped or untapped entry in the enclosure - mushroom headed plugs are fastened by means of an allen key

Raxton - Ex e Reducers

Raxton - Ex e Stopping Plugs

Technical - Ex e Accessories: • Quality: - SIRA (0518) 02 ATEX M207 - Bureau Veritas BS EN ISO 9001:2008 • Thread specification: - Isometric (ISO) to BS3643:1981 & ISO 965 Pts 1 & 3 - Imperial (ET) to BS31:1940 (1979) - National Pipe Thread (NPT) to ANSI/ASME:1983 - British Standard Pipe (BSP) to BS21:1985 - Pg to DIN 40430:1971 • Materials: Brass: - BS2874: 1985 CZ121 - Mild Steel: BS970 PT3 230M07 - Stainless Steel: BS970 PT3 316 S11 - Aluminium: BS1474/1 6082 T4 or T6 - Aluminium Bronze: BS1400 1985 AB2 or BS2874:1986 CA104 - Nylon: 30% Glass filled Nylon 66 - Brass: BS2874: 1985 CZ121 • Approvals - Adaptors: - Sira 10ATEX1225X - IECEx SIR 07.0010X - GOST РОСС GB.ГБ06.В01060 - INMETRO NCC 12.0764U • Approvals - Reducers: - Sira 10ATEX1225X - IECEx SIR 07.0010X - GOST РОСС GB.ГБ06.В01060 - INMETRO NCC 12.0764U

• Approvals - Stopping Plugs: - SIRA10ATEX1224X (metallic) - SIRA10ATEX1225X (nylon) - SIRA00ATEX1073U - IECExSIR07.0009X (metallic) - IECExSIR10.0164U (nylon) - GOST РОСС GB.ГБ06.В01060 - INMETRO NCC 12.0764U • Plating: - Nickel, Electro Zinc, Zinc Passivated, Chromatised, Electroless Nickel and Anodised • Temperature: - The item is classified as a component and is therefore not given a temperature rating - ‘O’ ring -50°c to 100°c - Nylon -20°c to 60°c • Independently tested to IP68


CABLE LADDER

CABLE LADDER ACCESSORIES

CABLE LADDER - GRP

CABLE TRAY

CABLE TRAY ACCESSORIES - Unistrut®

CABLE TRAY ACCESSORIES - Vantrunk

CABLE TRAY - STEEL WIRE BASKET

CABLE TRAY - uPVC

CHANNEL SUPPORT SYSTEMS

CHANNEL ACCESSORIES - Unistrut®

CHANNEL ACCESSORIES - Metsec

CHANNEL ACCESSORIES - Unifoot

CONDUIT - FLEXIBLE

CONDUIT - FLEXIBLE CONDUITACCESSORIES

CONDUIT - STEEL CONDUIT & ACCESSORIES

TRUNKING - LIGHTING

WIRE DUCTING

CABLE MANAGEMENTPlease see our Technical Section for

Cable Management Load Ratings

CABLE LADDER

Unistrut® - Cable Ladder

Vantrunk - Speedway Cable Ladder

Hot dipped galvanised cable ladder

3M Lengths

Hot dipped galvanised cable ladder. 6m lengths available on request

Code - Light 3m U10L310HGU10L315HGU10L320HGU10L330HGU10L340HGU10L345HGU10L350HG

Code - Medium 3m-U12L315HGU12L320HGU12L330HGU12L340HGU12L345HGU12L350HG

Code - Heavy 3m-U15L315HGU15L320HGU15L330HGU15L340HGU15L345HG-

Size (mm)100150200300400450500

Code - MediumSW4/SL3/150/GASW4/SL3/300/GASW4/SL3/450/GASW4/SL3/600/GASW4/SL3/750/GASW4/SL3/900/GA

Code - HeavySW5/SL3/150/GASW5/SL3/300/GASW5/SL3/450/GASW5/SL3/600/GASW5/SL3/750/GASW5/SL3/900/GA

Code - Extra HeavySW6/SL3/150/GASW6/SL3/300/GASW6/SL3/450/GASW6/SL3/600/GASW6/SL3/750/GASW6/SL3/900/GA

Size (mm)150300450600750900

6M LengthsCode - Light 6m U10L610HGU10L615HGU10L620HGU10L630HGU10L640HGU10L645HGU10L650HG

Code - Medium 6mU12L610HGU12L615HGU12L620HGU12L630HG-U12L645HG-

Code - Heavy 6m-U15L615HGU15L620HGU15L630HG-U15L645HGU15L650HG

Size (mm)100150200300400450500

CABLE LADDER ACCESSORIES

Unistrut® - Cable Ladder 90° Flat BendsHot dipped galvanised cable ladder

Code - Light Code - Medium Code - Heavy Size (mm)U10FB15/90/30HG U12FB15/90/30HG U15FB15/90/30HG 150U10FB30/90/30HG U12FB30/90/30HG U15FB30/90/30HG 300U10FB40/90/30HG - - 400U10FB45/90/30HG U12FB45/90/30HG U15FB45/90/30HG 450U10FB50/90/30HG - - 500U10FB60/90/30HG U12FB60/90/30HG U15FB60/90/30HG 600


CABLE MANAGEMENT


Unistrut® - Cable Ladder Equal Tees

Unistrut® - Cable Ladder Equal Crossover

Unistrut® - Cable Ladder 90° Internal Riser

Unistrut® - Cable Ladder 90° External Riser

Hot dipped galvanised

Other radius available - substitute “30” with 45/60/75/90 for 450mm/600mm/750mm/900mm radius







Code - Light Code - Medium Code - Heavy Size (mm) Radius (mm)U10LT15/15/30HG U12LT15/15/30HG U15LT15/15/30HG 150 300U10LT20/20/30HG - - 200 300U10LT30/30/30HG U12LT30/30/30HG U15LT30/30/30HG 300 300U10LT40/40/30HG - - 400 300U10LT45/45/30HG U12LT45/45/30HG U15LT45/45/30HG 450 300U10LT50/50/30HG - - 500 300U10LT60/60/30HG U12LT60/60/30HG U15LT60/60/30HG 600 300

Code - Light Code - Medium Code - Heavy Size (mm) Radius (mm)U10EC15/15/30PG U12EC15/15/30PG U15EC15/15/30PG 150 300U10EC30/30/30PG U12EC30/30/30PG U15EC30/30/30PG 300 300U10EC45/45/30PG U12EC45/45/30PG U15EC45/45/30PG 450 300U10EC50/50/30PG - - 500 300U10EC60/60/30PG U12EC60/60/30PG U15EC60/60/30PG 600 300

Code - Light Code - Medium Code - Heavy Size (mm) Radius (mm)U10IR10/90/30HG - - 100 300U10IR15/90/30HG U12IR15/90/30HG U15IR15/90/30HG 150 300U10IR20/90/30HG - - 200 300U10IR30/90/30HG U12IR30/90/30HG U15IR30/90/30HG 300 300U10IR40/90/30HG - - 400 300U10IR45/90/30HG U12IR45/90/30HG U15IR45/90/30HG 450 300U10IR50/90/30HG - - 500 300U10IR60/90/30HG U12IR60/90/30HG U15IR60/90/30HG 600 300

Code - Light Code - Medium Code - Heavy Size (mm) Radius (mm)U10OR10/90/30HG - - 100 300U10OR15/90/30HG U12OR15/90/30HG U15OR15/90/30HG 150 300U10OR20/90/30HG - - 200 300U10OR30/90/30HG U12OR30/90/30HG U15OR30/90/30HG 300 300U10OR40/90/30HG - - 400 300U10OR45/90/30HG U12OR45/90/30HG U15OR45/90/30HG 450 300U10OR50/90/30HG - - 500 300U10OR60/90/30HG U12OR60/90/30HG U15OR60/90/30HG 600 300


Vantrunk - Speedway Cable Ladder 90° Flat Elbows

Vantrunk - Speedway Cable Ladder Equal Crossover

Vantrunk - Speedway Cable Ladder 90° Internal Riser


Replace *with raidus required





Code - Medium Code - Heavy Code - Extra Heavy Size (mm)SW4/FE90/100/*/GA SW5/FE90/100/*/GA SW6/FE90/100/*/GA 100SW4/FE90/150/*/GA SW5/FE90/150/*/GA SW6/FE90/150/*/GA 150SW4/FE90/200/*/GA SW5/FE90/200/*/GA SW6/FE90/200/*/GA 200SW4/FE90/300/*/GA SW5/FE90/300/*/GA SW6/FE90/300/*/GA 300SW4/FE90/400/*/GA SW5/FE90/400/*/GA SW6/FE90/400/*/GA 400SW4/FE90/450/*/GA SW5/FE90/450/*/GA SW6/FE90/450/*/GA 450SW4/FE90/500/*/GA SW5/FE90/500/*/GA SW6/FE90/500/*/GA 500

Code - Medium Code - Heavy Code - Extra Heavy Size (mm)SW4/C/100/*/GA SW5/C/100/*/GA SW6/C/100/*/GA 100SW4/C/150/*/GA SW5/C/150/*/GA SW6/C/150/*/GA 150SW4/C/200/*/GA SW5/C/200/*/GA SW6/C/200/*/GA 200SW4/C/300/*/GA SW5/C/300/*/GA SW6/C/300/*/GA 300SW4/C/400/*/GA SW5/C/400/*/GA SW6/C/400/*/GA 400SW4/C/450/*/GA SW5/C/450/*/GA SW6/C/450/*/GA 450SW4/C/500/*/GA SW5/C/500/*/GA SW6/C/500/*/GA 500

Code - Medium Code - Heavy Code - Extra Heavy Size (mm)SW4/IR90/100/*/GA SW5/IR90/100/*/GA SW6/IR90/100/*/GA 100SW4/IR90/150/*/GA SW5/IR90/150/*/GA SW6/IR90/150/*/GA 150SW4/IR90/200/*/GA SW5/IR90/200/*/GA SW6/IR90/200/*/GA 200SW4/IR90/300/*/GA SW5/IR90/300/*/GA SW6/IR90/300/*/GA 300SW4/IR90/400/*/GA SW5/IR90/400/*/GA SW6/IR90/400/*/GA 400SW4/IR90/450/*/GA SW5/IR90/450/*/GA SW6/IR90/450/*/GA 450SW4/IR90/500/*/GA SW5/IR90/500/*/GA SW6/IR90/500/*/GA 500


Vantrunk - Speedway Cable Ladder 90° External RiserHot dipped galvanised

Code - Medium Code - Heavy Code - Extra Heavy Size (mm)SW4/OR90/100/*/GA SW5/OR90/100/*/GA SW6/OR90/100/*/GA 100SW4/OR90/150/*/GA SW5/OR90/150/*/GA SW6/OR90/150/*/GA 150SW4/OR90/200/*/GA SW5/OR90/200/*/GA SW6/OR90/200/*/GA 200SW4/OR90/300/*/GA SW5/OR90/300/*/GA SW6/OR90/300/*/GA 300SW4/OR90/400/*/GA SW5/OR90/400/*/GA SW6/OR90/400/*/GA 400SW4/OR90/450/*/GA SW5/OR90/450/*/GA SW6/OR90/450/*/GA 450SW4/OR90/500/*/GA SW5/OR90/500/*/GA SW6/OR90/500/*/GA 500

CABLE MANAGEMENT


Vantrunk - Speedway Cable Ladder Equal Tees



• Corrosion Resistant Composite Technology • Specifically designed for harsh and corrosive environments • Material: Polyester resin • Construction of fittings: 316 stainless steel bolts and assembly plates • Heavy duty

Code - Medium Code - Heavy Code - Extra Heavy Size (mm)SW4/ET/100/*/GA SW5/ET/100/*/GA SW6/ET/100/*/GA 100SW4/ET/150/*/GA SW5/ET/150/*/GA SW6/ET/150/*/GA 150SW4/ET/200/*/GA SW5/ET/200/*/GA SW6/ET/200/*/GA 200SW4/ET/300/*/GA SW5/ET/300/*/GA SW6/ET/300/*/GA 300SW4/ET/400/*/GA SW5/ET/400/*/GA SW6/ET/400/*/GA 400SW4/ET/450/*/GA SW5/ET/450/*/GA SW6/ET/450/*/GA 450SW4/ET/500/*/GA SW5/ET/500/*/GA SW6/ET/500/*/GA 500

CABLE TRAY

CABLE LADDER - GRP

Unistrut® - Light Duty Cable TrayCode - HDG Code - PG Width (mm) Length (m)TULL050/10HG TULL050/10PG 50 3TULL075/10HG TULL075/10PG 75 3TULL100/10HG TULL100/10PG 100 3TULL150/10HG TULL150/10PG 150 3TULL225/10HG TULL225/10PG 225 3TULL300/15HG TULL300/15PG 300 3TULL450/15HG TULL450/15PG 450 3TULL600/20HG TULL600/20PG 600 3TULL750/20HG TULL750/20PG 750 3TULL900/20HG TULL900/20PG 900 3

Schneider - GNLN Range of GRP Cable Ladder

Code Width (mm) Height (mm) Length (m) Cover Ref GNLN150 150 150 3 GCL150 200 150 3 GCL200GNLN300 300 150 3 GCL300GNLN400 400 150 3 GCL400GNLN450 450 150 3 GCL450GNLN600 600 150 3 GCL600GNLN750 750 150 3 GCL750GNLN900 900 150 3 GCL900Full range of accessories and sizes available - please call for details

COME AND VISIT ONE OF OUR BRANCHESFor all of your cable management needs under one roof.


Unistrut® - Medium Duty Cable Tray

Unistrut® - Heavy Duty Cable Tray

Code - HDG Code - PG Width (mm) Length (m)TUML050/10HG TUML050/10PG 50 3TUML075/10HG TUML075/10PG 75 3TUML100/10HG TUML100/10PG 100 3TUML150/10HG TUML150/10PG 150 3TUML225/10HG TUML225/10PG 225 3TUML300/15HG TUML300/15PG 300 3TUML450/15HG TUML450/15PG 450 3TUML600/20HG TUML600/20PG 600 3TUML750/20HG TUML750/20PG 750 3TUML900/20HG TUML900/20PG 900 3

Code - HDG Code - PG Width (mm) Length (m)TUHL050/10HG TUHL050/10PG 50 3TUHL075/10HG TUHL075/10PG 75 3TUHL100/10HG TUHL100/10PG 100 3TUHL150/10HG TUHL150/10PG 150 3TUHL225/10HG TUHL225/10PG 225 3TUHL300/15HG TUHL300/15PG 300 3TUHL450/15HG TUHL450/15PG 450 3TUHL600/20HG TUHL600/20PG 600 3TUHL750/20HG TUHL750/20PG 750 3TUHL900/20HG TUHL900/20PG 900 3

Vantrunk - Medium Duty Cable TrayCode - HDG Code - PG Width (mm) Length (m)MR/SL3/50/GA MR/SL3/50/PG 50 3MR/SL3/75/GA MR/SL3/75/PG 75 3MR/SL3/100/GA MR/SL3/100/PG 100 3MR/SL3/150/GA MR/SL3/150/PG 150 3MR/SL3/200/GA MR/SL3/200/PG 200 3MR/SL3/225/GA MR/SL3/225/PG 225 3MR/SL3/300/GA MR/SL3/300/PG 300 3Also available in Stainless Steel - please contact us for further details

Vantrunk - Heavy Duty Cable TrayCode - HDG Code - PG Width (mm) Length (m)HR/SL3/50/GA HR/SL3/50/PG 50 3HR/SL3/75/GA HR/SL3/75/PG 75 3HR/SL3/100/GA HR/SL3/100/PG 100 3HR/SL3/150/GA HR/SL3/150/PG 150 3HR/SL3/200/GA HR/SL3/200/PG 200 3HR/SL3/225/GA HR/SL3/225/PG 225 3HR/SL3/300/GA HR/SL3/300/PG 300 3Also available in Stainless Steel - please contact us for further details

CABLE MANAGEMENT


Unistrut® - Equal Tee

Unistrut® - Flexible Riser

Code - LightTULT050HGTULT075HGTULT100HGTULT150HGTULT225HGTULT300HGTULT450HGTULT600HGTULT750HGTULT900HG

Code - MediumTUMT050HGTUMT075HGTUMT100HGTUMT150HGTUMT225HGTUMT300HGTUMT450HGTUMT600HGTUMT750HGTUMT900HG

Code - Heavy TUHT050HGTUHT075HGTUHT100HGTUHT150HGTUHT225HGTUHT300HGTUHT450HGTUHT600HGTUHT750HGTUHT900HG

Size (mm)5075100150225300450600750900

Code - LightTULAR050HGTULAR075HGTULAR100HGTULAR150HGTULAR225HGTULAR300HGTULAR450HGTULAR600HGTULAR750HGTULAR900HG

Code - MediumTUMAR050HGTUMAR075HGTUMAR100HGTUMAR150HGTUMAR225HGTUMAR300HGTUMAR450HGTUMAR600HGTUMAR750HGTUMAR900HG

Code - Heavy TUHAR050HGTUHAR075HGTUHAR100HGTUHAR150HGTUHAR225HGTUHAR300HGTUHAR450HGTUHAR600HGTUHAR750HGTUHAR900HG

Size (mm)5075100150225300450600750900

Also available in Pre Galv - Please substitute PG for HG when ordering


74.5

W

B

W

CABLE TRAY ACCESSORIES - Unistrut®Unistrut® - 90º & 45º Flat Bends

Code - 90º LightTULB050/90HGTULB075/90HGTULB100/90HGTULB150/90HGTULB225/90HGTULB300/90HGTULB450/90HGTULB600/90HGTULB750/90HGTULB900/90HG

Code - 90º MediumTUMB050/90HGTUMB075/90HGTUMB100/90HGTUMB150/90HGTUMB225/90HGTUMB300/90HGTUMB450/90HGTUMB600/90HGTUMB750/90HGTUMB900/90HG

Code - 90º Heavy TUHB050/90HGTUHB075/90HGTUHB100/90HGTUHB150/90HGTUHB225/90HGTUHB300/90HGTUHB450/90HGTUHB600/90HGTUHB750/90HGTUHB900/90HG

Size (mm)5075100150225300450600750900

Code - 45º LightTULB050/45HGTULB075/45HGTULB100/45HGTULB150/45HGTULB225/45HGTULB300/45HGTULB450/45HGTULB600/45HGTULB750/45HGTULB900/45HG

Code - 45º MediumTUMB050/45HGTUMB075/45HGTUMB100/45HGTUMB150/45HGTUMB225/45HGTUMB300/45HGTUMB450/45HGTUMB600/45HGTUMB750/45HGTUMB900/45HG

Code - 45º Heavy TUHB050/45HGTUHB075/45HGTUHB100/45HGTUHB150/45HGTUHB225/45HGTUHB300/45HGTUHB450/45HGTUHB600/45HGTUHB750/45HGTUHB900/45HG

Size (mm)5075100150225300450600750900


BW

74.5

C

W

74.5

B


Unistrut® - Equal Crossover

Code - LightTULX050HGTULX075HGTULX100HGTULX150HGTULX225HGTULX300HGTULX450HGTULX600HGTULX750HGTULX900HG

Code - MediumTUMX050HGTUMX075HGTUMX100HGTUMX150HGTUMX225HGTUMX300HGTUMX450HGTUMX600HGTUMX750HGTUMX900HG

Code - Heavy TUHX050HGTUHX075HGTUHX100HGTUHX150HGTUHX225HGTUHX300HGTUHX450HGTUHX600HGTUHX750HGTUHX900HG

Size (mm)5075100150225300450600750900


BW

74.5

Unistrut® - Cable Tray Reducers Light Duty

Unistrut® - Cable Tray Reducers Medium Duty



W2

C

W1

W2

CW1

CodeTUMSR075/050HGTUMSR100/050HGTUMSR100/075HGTUMSR150/050HGTUMSR150/075HGTUMSR150/100HGTUMSR225/075HGTUMSR225/100HGTUMSR225/150HGTUMSR300/100HGTUMSR300/150HGTUMSR300/225HGTUMSR450/100HGTUMSR450/150HG

Size (mm)75 to 50100 to 50100 to 75150 to 50150 to 75150 to 100225 to 75225 to 100225 to 150300 to 100300 to 150300 to 225450 to 100450 to 150

CodeTUMSR450/225HGTUMSR450/300HGTUMSR600/150HGTUMSR600/225HGTUMSR600/300HGTUMSR600/450HGTUMSR750/225HGTUMSR750/300HGTUMSR750/450HGTUMSR750/600HGTUMSR900/300HGTUMSR900/450HGTUMSR900/600HGTUMSR900/750HG


CodeTULSR075/050HGTULSR100/050HGTULSR100/075HGTULSR150/050HGTULSR150/075HGTULSR150/100HGTULSR225/075HGTULSR225/100HGTULSR225/150HGTULSR300/100HGTULSR300/150HGTULSR300/225HGTULSR450/100HGTULSR450/150HG


CodeTULSR450/225HGTULSR450/300HGTULSR600/150HGTULSR600/225HGTULSR600/300HGTULSR600/450HGTULSR750/225HGTULSR750/300HGTULSR750/450HGTULSR750/600HGTULSR900/300HGTULSR900/450HGTULSR900/600HGTULSR900/750HG


CABLE MANAGEMENT


Unistrut® - Cable Tray Reducers Heavy DutyAlso available in Pre Galv - Please substitute PG for HG when orderingCode TUHSR075/050HGTUHSR100/050HGTUHSR100/075HGTUHSR150/050HGTUHSR150/075HGTUHSR150/100HGTUHSR225/075HGTUHSR225/100HGTUHSR225/150HGTUHSR300/100HGTUHSR300/150HGTUHSR300/225HGTUHSR450/100HGTUHSR450/150HG


CodeTUHSR450/225HGTUHSR450/300HGTUHSR600/150HGTUHSR600/225HGTUHSR600/300HGTUHSR600/450HGTUHSR750/225HGTUHSR750/300HGTUHSR750/450HGTUHSR750/600HGTUHSR900/300HGTUHSR900/450HGTUHSR900/600HGTUHSR900/750HG


W2

C

W1

CABLE TRAY ACCESSORIES - VantrunkVantrunk - Equal CrossoverAlso available in Pre Galv and Stainless Steel - please contact us for further details

Code - Medium Code - Heavy Size (mm)MR/EC/50/GA HR/EC/50/GA 50MR/EC/75/GA HR/EC/75/GA 75MR/EC/100/GA HR/EC/100/GA 100MR/EC/150/GA HR/EC/150/GA 150MR/EC/200/GA HR/EC/200/GA 200MR/EC/225/GA HR/EC/225/GA 225MR/EC/300/GA HR/EC/300/GA 300

Vantrunk - Equal TeeAlso available in Pre Galv and Stainless Steel - please contact us for further details

Code - Medium Code - Heavy Size (mm)MR/ET/50/GA HR/ET/50/GA 50MR/ET/75/GA HR/ET/75/GA 75MR/ET/100/GA HR/ET/100/GA 100MR/ET/150/GA HR/ET/150/GA 150MR/ET/200/GA HR/ET/200/GA 200MR/ET/225/GA HR/ET/225/GA 225MR/ET/300/GA HR/ET/300/GA 300

BUILD A BRACKET AT R&M FIXINGSPre-fabrication is the largest contributor to reducing costs and saving time, as well as improving quality and reducing defects on site. R&M Fixings & Supports present to you Build a Bracket - the online product configurator for all your pre-fabrication needs. Go to the website below for more information

www.buildabracket.com


Vantrunk - Cable Tray Reducers Medium Duty

Vantrunk - Cable Tray Reducers Heavy Duty

Also available in Pre Galv and Stainless Steel - please contact us for further details


Code Size (mm)MR/RS/75/50/GA 75 to 50MR/RS/100/50/GA 100 to 50MR/RS/100/75/GA 100 to 75MR/RS/150/50/GA 150 to 50MR/RS/150/75/GA 150 to 75MR/RS/150/100/GA 150 to 100MR/RS/200/50/GA 200 to 50MR/RS/200/75/GA 200 to 75MR/RS/200/100/GA 200 to 100MR/RS/200/150/GA 200 to 150MR/RS/225/50/GA 225 to 50

Code Size (mm)MR/RS/225/75/GA 225 to 75MR/RS/225/100/GA 225 to 100MR/RS/225/150/GA 225 to 150MR/RS/225/200/GA 225 to 200MR/RS/300/50/GA 300 to 50MR/RS/300/75/GA 300 to 75MR/RS/300/100/GA 300 to 100MR/RS/300/150/GA 300 to 150MR/RS/300/200/GA 300 to 200MR/RS/300/225/GA 300 to 225

Code Size (mm)HR/RS/75/50/GA 75 to 50HR/RS/100/50/GA 100 to 50HR/RS/100/75/GA 100 to 75HR/RS/150/50/GA 150 to 50HR/RS/150/75/GA 150 to 75HR/RS/150/100/GA 150 to 100HR/RS/200/50/GA 200 to 50HR/RS/200/75/GA 200 to 75HR/RS/200/100/GA 200 to 100HR/RS/200/150/GA 200 to 150HR/RS/225/50/GA 225 to 50

Code Size (mm)HR/RS/225/75/GA 225 to 75HR/RS/225/100/GA 225 to 100HR/RS/225/150/GA 225 to 150HR/RS/225/200/GA 225 to 200HR/RS/300/50/GA 300 to 50HR/RS/300/75/GA 300 to 75HR/RS/300/100/GA 300 to 100HR/RS/300/150/GA 300 to 150HR/RS/300/200/GA 300 to 200HR/RS/300/225/GA 300 to 225

Vantrunk - 90° Flat Elbows

Vantrunk - 45° Flat Elbows



Code - Medium Code - Heavy Size (mm)MR/FE90/50/GA HR/FE90/50/GA 50MR/FE90/75/GA HR/FE90/75/GA 75MR/FE90/100/GA HR/FE90/100/GA 100MR/FE90/150/GA HR/FE90/150/GA 150MR/FE90/200/GA HR/FE90/200/GA 200MR/FE90/225/GA HR/FE90/225/GA 225MR/FE90/300/GA HR/FE90/300/GA 300

Code - Medium Code - Heavy Size (mm)MR/FE45/50/GA HR/FE45/50/GA 50MR/FE45/75/GA HR/FE45/75/GA 75MR/FE45/100/GA HR/FE45/100/GA 100MR/FE45/150/GA HR/FE45/150/GA 150MR/FE45/200/GA HR/FE45/200/GA 200MR/FE45/225/GA HR/FE45/225/GA 225MR/FE45/300/GA HR/FE45/300/GA 300

CABLE MANAGEMENT


Vantrunk - Variable RiserAlso available in Pre Galv and Stainless Steel - please contact us for further details

CABLE TRAY - STEEL WIRE BASKETCablofil - CF 54 Series Wire Cable TrayAdditional finishes and size available. Please call for details.Code - HDGCF54/50GCCF54/100GCCF54/150GCCF54/200GCCF54/300GCCF54/400GCCF54/450GCCF54/500GCCF54/600GCCF54/700GC

Code - EZPCF54/50EZCF54/100EZCF54/150EZCF54/200EZCF54/300EZCF54/400EZCF54/450EZCF54/500EZCF54/600EZCF54/700EZ

Size HxW (mm)54x5054x10054x15054x20054x30054x40054x45054x50054x60054x700

Length (m)3333333333

Code - Medium Code - Heavy Size (mm)MR/VR/50/GA HR/VR/50/GA 50MR/VR/75/GA HR/VR/75/GA 75MR/VR/100/GA HR/VR/100/GA 100MR/VR/150/GA HR/VR/150/GA 150MR/VR/200/GA HR/VR/200/GA 200MR/VR/225/GA HR/VR/225/GA 225MR/VR/300/GA HR/VR/300/GA 300

Cablofil - CF 30 Series Wire Cable Tray

Pemsa - Rejiband® Mesh Tray

Additional finishes and size available. Please call for details.

Full range of finishes, sizes and accessories available - please call for details

Code - HDGCF30/50GCCF30/100GCCF30/150GCCF30/200GCCF30/300GCCF30/400GCCF30/450GCCF30/500GCCF30/600GC

Code - EZPCF30/50EZCF30/100EZCF30/150EZCF30/200EZCF30/300EZCF30/400EZCF30/450EZCF30/500EZCF30/600EZ

Size HxW (mm)30x5030x10030x15030x20030x30030x40030x45030x50030x600

Length (m)333333333

Code - Bycro Size (HxW) (mm) Length (m)60221100 35 x 100 360221150 35 x 150 360221200 35 x 200 360221300 35 x 300 360222060 60 x 60 360222100 60 x 100 360222150 60 x 150 360222200 60 x 200 360222300 60 x 300 360222400 60 x 400 360222600 60 x 600 3

Code - HDG Size (HxW) (mm) Length (m)60231100 35 x 100 360231200 35 x 200 360231300 35 x 300 360232060 60 x 60 360232100 60 x 100 360232150 60 x 150 360232200 60 x 200 360232300 60 x 300 360232400 60 x 400 360232500 60 x 500 360232600 60 x 600 3


Code Description FinishCE25EZ Clamp, Central Hanger EZPCE30EZ Clamp, Central Hanger EZPCE40EZ Clamp, Central Hanger EZPCAAEZ Standard Coupling Kit - 4 Part Kit

Code - Light Width (mm) Height (mm)LT50-2 50 25LT75-2 75 25LT100-2 100 20LT150-2 150 20LT200-2 200 20LT300-2 300 20

Code - Medium Width (mm) Height (mm)MT50-5 50 50MT75-5 75 50MT100-5 100 50MT150-5 150 50

Cablofil - Wire Cable Tray Clamps

Schneider - Cable Tray uPVC

Additional finishes and size available. Please call for details.

Available in Pre Galvanized, Hot Dip Galvanized and Stainless Steel

Colour - Grey (White available on request - please call for details)

CAAEZ

CABLE TRAY - uPVC

CHANNEL SUPPORT SYSTEMSUnistrut® - Channel

Metsec - Channel

SingleCode - Plain Code - Slotted Width (mm) Height (mm) Length (m)P1000X3** P1000TX3** 41 41 3P1000X6** P1000TX6** 41 41 6P3300X3** P3300T10X3** 41 21 3P3300X6** P3300T10X6** 41 21 6

Code - Accessories Description Dimensions (mm)MR50030 Reducer 500 - 300MT30010END Stop End, Cable Tray 300 x 100MTC100 Cover, Cable Tray Medium Duty 100 x 50 x 3mMTC150 Cover, Cable Tray Medium Duty 150 x 50 x 3m

Single - Pre GalvCode - Plain Code - Slotted Width (mm) Height (mm) Length (m)MS4125PG3 MS4125PG3S11 41 41 3MS4125PG6 MS4125PG6S11 41 41 6MS2125PG3 MS2125PG3S11 41 21 3MS2125PG6 MS2125PG6S11 41 21 6

Back to BackCode - Plain Code - Slotted Width (mm) Height (mm) Length (m)P1001X3** P1001TX3** 41 83 3P1001X6** P1001TX6** 41 83 6P1001TX3** P3301T10X3** 41 41 3P1001TX6** P3301T10X6** 41 41 6

Back to Back - Pre GalvCode - Plain Width (mm) Height (mm) Length (m)MS4125PG3C2 41 41 3MS4125PG6C2 41 41 6MS2125PG3C2 41 83 3MS2125PG6C2 41 83 6

For Finish replace ** with - PG - Pre Galv / HDG - Hot Dip Galv / SS - Stainless Steel

HDG Available

Wide range of accessories available - please call for details

CABLE MANAGEMENT


Unistrut® - Flat Fittings

Unistrut® - Angle Fittings

Unistrut® -90° Angle Fittings

Unistrut® - Wing Fittings

Unistrut® - U Fittings

Code Description Size FinishP1019 1 Hole Plate M6/M8 HDGP1020 1 Hole Plate M10/M12 HDGP1065 2 Hole Plate 89mm Length HDGP1066 3 Hole Plate 120mm Length HDGP1067 4 Hole Plate 160mm Length HDGP1036 3 Hole Plate 90X90mm HDGP1031 4 Hole Plate 138X90mm HDG

Code Description Angle FinishP1546 2 Hole Angle Fitting 45° HDGP2097 2 Hole Angle Fitting 60° HDGP2095 2 Hole Angle Fitting 75° HDGP2101 2 Hole Angle Fitting 30° HDGP2103 2 Hole Angle Fitting 15° HDGP1186 2 Hole Angle Fitting 45° HDGP2108 2 Hole Angle Fitting 60° HDGP2106 2 Hole Angle Fitting 75° HDGP1074 4 Hole Angle Fitting 45° HDG

Code Description Angle FinishP1026 2 Hole Bracket 90° HDGP1068 2 Hole Bracket 90° HDGP1325 4 Hole Bracket 90° HDGP1346 3 Hole Bracket 90° HDGP1359 4 Hole Bracket 90° HDGP1727 5 Hole Bracket 90° HDG

Code Description FinishP2348-S1 2+9 Hole Wing Bracket HDGP2348-S2 2+12 Hole Wing Bracket HDGP2346 8 Hole Wing Bracket HDGP2223 4 Hole Wing Bracket HDG

Code Description FinishP4047 U Shaped Bracket HDGP1047 U Shaped Bracket HDGP1737 U Shaped Bracket HDGP1043 U Shaped Bracket HDG

P1019

P1546

P1359P1346

P2223

P1325

P2346

P1068

P2348-S2

P1026

P2348-S1

P4047 P1047 P1737 P1043

P1067

P1020

P2101

P1036

P1065

P2106 P1074

P1066

P1031

P1727

Unistrut® - CHANNEL ACCESSORIES


Metsec - Flat Fittings

Unistrut® - Z Fittings

Unistrut® - Channel Base Fittings

Unistrut® - Channel Nuts BZP

METSEC - CHANNEL ACCESSORIES

Code Description Size FinishMSF501/06 Square Plate M6 HDGMSF501/08 Square Plate M8 HDGMSF501/10 Square Plate M10 HDGMSF501/12 Square Plate M12 HDGMSF502 2 Hole Plate - HDGMSF503 3 Hole Plate - HDGMSF504 4 Hole Plate - HDGMSF505 5 Hole Plate - HDGMSF506 3 Hole L Bracket - HDGMSF507 4 Hole Tee Bracket - HDGMSF509 Delta 4 Hole Flat Plate - HDG

Code Description FinishP4045 Z SHAPED BRACKET HDGP1045 Z SHAPED BRACKET HDGP1453 Z SHAPED BRACKET HDGP1347 Z SHAPED BRACKET HDG

Code Description FinishP2072-S1 Channel Base Fitting HDGP2073 Channel Base Fitting HDGP2072A Channel Base Fitting HDG

Long Spring Short Spring No Spring SizePNL06ZP PNS06ZP PNP06ZP M6PNL08ZP PNS08ZP PNP08ZP M8PNL10ZP PNS10ZP PNP10ZP M10PNL12ZP PNS12AZP PNP12ZP M12

Metsec - Angle Fittings

45°Specify

Specify 45°

Code Description FinishMSA612 Welded Angle Bracket, 4 Hole HDGMSA614 Obtuse Angle Bracket, Small 2 Hole HDGMSA615 Obtuse Angle Bracket, Large 2 Hole HDGMSA616 Acute Angle Bracket, 2 Hole HDGMSA617 Obtuse Angle Bracket, Tee 4 Hole HDG

P4045

P2073 P2072AP2072-S1

PNL06ZP

MSF501/08MSF502

MSF503

MSF504MSF505

MSF506 MSF507

PNS06ZP PNP06ZP

P1045 P1453 P1347

MSA612 MSA614 MSA615 MSA616 MSA617

CABLE MANAGEMENT


Metsec - 90° Angle FittingsCode Description Angle FinishMSA600 2 Hole Bracket 90° HDGMSA601 2 Hole Bracket 90° HDGMSA602 3 Hole Bracket 90° HDGMSA603 3 Hole Bracket 90° HDGMSA604 3 Hole Bracket 90° HDGMSA605 4 Hole Bracket 90° HDGMSA606 4 Hole Bracket 90° HDGMSA607 Left Hand 4 Hole Bracket 90° HDGMSA608 Right Hand 4 Hole Bracket 90° HDGMSA609 Tee 4 Hole Bracket 90° HDGMSA610 Delta Large 4 Hole Bracket 90° HDGMSA611 Delta Small 3 Hole Bracket 90° HDG

Metsec - Z Fittings

Metsec - Channel Base Fittings

Uni-foot - H-Frame Set

Metsec - Channel Spring Nuts BZP

Code Description FinishMSZ701 Single Z Bracket HDGMSZ702 Double Z Bracket HDGMSZ700 Shallow Z Bracket HDG

Code Description FinishMBP304 Single Fix HDGMBP305 Double Fix HDGMBP306 Double Channel 4 Hole HDGMBP307 Single Delta 6 Hole HDGMBP308 Double Delta 6 Hole HDG

Long Spring Short Spring No Spring SizeMLN06 MSN06 MPN06 M6MLN08 MSN08 MPN08 M8MLN10 MSN10 MPN10 M10MLN12 MSN12 MPN12 M12

MSZ700

MSB304

MPN06MSN06

MLN06

MSB305 MSB306 MSB307 MSB308

MSA600 MSA601 MSA602

MSA603

MSA604 MSA605 MSA606

MSA607

MSA608

MSA609

MSA610 MSA611

MSZ701 MSZ702

CHANNEL ACCESSORIES

This system can be used to support small & large ducting, pipe work or electrical containment. All the components come complete in a box, simply add your own lengths of strut to create the size of H-frame you require.

H-Frame Set Includes - 2 x Unifoot 305mm x 305mm Feet, 2 x Anti Vibration Pads, 2 x Angled Brackets, 4 x M10 Bolts, 4 x M10 Channel Nuts

Length (mm) Width (mm) Height (mm) Load (Kg)305 305 75 100


CONDUIT - FLEXIBLEFlexicon - FU Pre-Galv Flexible Conduit • Pre-Galv, helically wound, flexible conduit. Colour zinc, self colour • High mechanical strength • Highly flexible • Temperature Range: -100°C to +300°C • IP rating: IP40 with standard fittings • Inherent Low Fire Hazard Product

Code - 10m Code - 25m Code - 50m Outside ø (mm) Inside ø (mm) Bend Rad (mm) Nom SizeFU10-10M FU10-25M FU10-50M 9 6.8 25 10FU12-10M FU12-25M FU12-50M 13 10.2 30 12FU16-10M FU16-25M FU16-50M 16 13 40 16FU20-10M FU20-25M FU20-50M 20.5 16.9 45 20FU25-10M FU25-25M FU25-50M 25 21.1 55 25FU32-10M FU32-25M - 32 28.1 70 32Larger Sizes Are Available

Flexicon - FSU Pre-Galv PVC Coated Conduit

Code - 10m Code - 25m Code - 50m Outside ø (mm) Inside ø (mm) Bend Rad (mm) Nom SizeFSU16B-10M FSU16B-25M FSU16B-50M 17 13 40 16FSU20B-10M FSU20B-25M FSU20B-50M 21.5 16.9 45 20FSU25B-10M FSU25B-25M FSU25B-50M 26 21.1 55 25FSU32B-10M FSU32B-25M - 34 28.1 70 32

• Pre-Galv, helically wound, flexible steel conduit with PVC coating • Colour black. Grey or orange on request • High mechanical strength • Highly flexible • IP rating: IP54 with standard fittings • IP65 with type C compression fittings • Temperature range: -15°C to +70°C • Low Fire Hazard version available • Nickel plated brass

Kopex - Liquid Tight Conduits/LT-PVC General Flexible

Code 10m Code 20m Code 30m Conduit Size (mm) Inside Dia. (mm)FLB0110 - FLB0130 10 6.2FLB0210 - FLB0230 12 10FLB0310 - FLB0330 16 12.5FLB0410 - FLB0430 20 16FLB0510 - FLB0530 25 21FLB0610 - FLB0630 32 26FLB0710 FLB0720 - 40 34.8FLB0810 FLB0820 - 50 40.4FLB0910 FLB0920 - 63 51.6

• Temp rating, -25°C to +105°C • Flame Propogation - Flame dies in 30 seconds after ignition source is removed • Black

Uni-foot - UnifootThe Uni-Foot was designed to support all of the different means of outdoor electrical equipment. It is a flexible product that allows the installer to create their own solutions in any number of situations. The Uni-Foot is made from 100% recycled heavy duty PVC so it is strong and durable in all weather conditions.

Length (mm) Width (mm) Height (mm) Load (Kg)250 150 100 100

CABLE MANAGEMENT


Kopex - Liquid Tight Conduit/LT-T LFH Limited Fire Hazard Flexible

Code 10m Code 20m Code 30m Conduit Size (mm) Inside Dia. (mm)FLT0310 - FLT0330 16 12.5FLT0410 - FLT0430 20 16FLT0510 - FLT0530 25 21FLT0610 - FLT0630 32 26FLT0710 FLT0720 - 40 34.8FLT0810 FLT0820 - 50 40.4FLT0910 FLT0920 - 63 51.6

• Temp rating, -25°C to +90°C • Flame Propogation - Flammability temperature index: 290°C • Oxygen Index: 35, Toxicity Index (NES 713) 1.5 Halogen Acid Evolution (BS6425 pt1) zero. Ozone resistance (ASTM 470) Pass • LUL Fully Compliant (E1042A6), MOD to NES518: Issue 3, DEF Stan 61-12 (part 31) Issue 1 • Black

Flexicon - FU Fixed Fitting Type M IP40

Code Size (mm) FinishFU16-M16-M 16 BrassFU20-M20-M 20 BrassFU25-M25-M 25 BrassFU32-M32-M 32 Brass Larger Sizes Are Available

• Fixed external thread • Nickel plated brass • Two part fitting comprising shell and body with external shell • Fitting can be inserted into knockout and secured with a locknut

FLEXIBLE CONDUIT ACCESSORIES

Kopex - Pliable Conduit, Screenforce Type T, Covered Metallic

Code 10m Code 20m Code 30m Conduit Size (mm) Inside Dia. (mm)PHT0310 - PHT0330 16 11.6PHT0410 - PHT0430 20 14.6PHT0510 - PHT0530 25 20.4PHT0610 PHT0620 - 32 26.7PHT0710 PHT0720 - 40 32.8PHT0810 PHT0820 - 50 45.3PHT0910 PHT0920 - 63 56.3

• Temp. Rating, -25°C to +90°C • Flame Propogation - Flame dies in 30 seconds after ignition source is removed • EMC Screening level: 94dB at 1MHz with C12, 106dB at 1MHz with C18 • LUL Fully Compliant. MOD NES 518:Issue 3, DEF STAN 61-12 (Part 31) Issue 1 • Black


Flexicon - FU Plain Hole Connectors Type P IP40

Flexicon - FU Swivel Fitting Type S IP40

Code Size (mm) FinishFU16-P 16 BrassFU20-P 20 BrassFU25-P 25 BrassFU32-P 32 Brass Larger Sizes Are Available

Code Size (mm) FinishFU16-M16-S 16 BrassFU16-M20-S 20 BrassFU20-M20-S 20 BrassFU25-M25-S 25 BrassFU32-M32-S 32 Brass Larger Sizes Are Available

• Plain hold connector nickel plated brass • Two part fitting comprising shell and body without thread • The body is fitted through the opposite side of the entry to the conduit and acts as a locking device also providing a smooth entry bush

• Swivel external thead nickel plated brass • Two part fitting comprising shell and body • External thread swivels about the main body • Can be used with threaded entries, or knockout secured with a lock nut

Flexicon - FSU Swivel Fitting Type S IP54

Code Size (mm) FinishFSU16-M16-S 16 BrassFSU16-M20-S 20 BrassFSU20-M20-S 20 BrassFSU25-M25-S 25 BrassFSU32-M32-S 32 BrassLarger Sizes Are Available

Code Size (mm) FinishFSU16-M16-M 16 BrassFSU20-M20-M 20 BrassFSU25-M25-M 25 BrassFSU32-M32-M 32 BrassLarger Sizes Are Available

• Swivel external thead nickel plated brass • Two part fitting comprising shell and body • External thread swivels about the main body • Can be used with threaded entries, or knockout secured with a lock nut

Flexicon - FSU Fixed Fitting Type M IP54 • Fixed external thread • Nickel plated brass • Two part fitting comprising shell and body with external shell • Fitting can be inserted into knockout and secured with a locknut

CABLE MANAGEMENT


Flexicon - FSU Plain Hole Connectors Type P IP54

Code Size (mm) FinishFSU16-P 16 BrassFSU20-P 20 BrassFSU25-P 25 BrassFSU32-P 32 Brass Larger Sizes Are Available

• Plain hold connector nickel plated brass• Two part fitting comprising shell and body without thread• The body is fitted through the opposite side of the entry to the conduit and acts as a locking device also providing a smooth entry bush

Flexicon - Contractor Pack

Code Description SizeFSU-CP20B Contractor Pack M20

• Steel - PVC coating - black IP54• 10 metres of Pre-Galv with PVC coating FSU20• Temperature range -15°C to +70°C• Self Extinguishing• High Mechanical Strength

• Highly Flexible• 5 x M20 fixed fittings• 5 x M20 swivel fittings• 10 x steel locknuts

• Superscreen Types T, H, S • Fixed straight, brass • Accepted by Lloyds Register of Shipping for suitable applications • IP Rating - IP66 & 67

Kopex - C18 Type Connectors

Male Connector Female Connector Conduit Size (mm) QuantityBGM0303 BTM0303 16 25BGM0404 BTM0404 20 25BGM0505 BTM0505 25 10BGM0606 BTM0606 32 5BGM0707 BTM0707 40 5BGM0808 BTM0808 50 2BGM0909 BTM0909 63 1

Steel ConduitCode - Galv Code - Black Size (mm) Length (m)SC20GA-3 SC20BE -3 20 3 SC25GA-3 SC25BE -3 25 3

CONDUIT AND ACCESSORIES - STEEL


Bend - Inspection

Galv Black Size (mm)ELB-INS20G ELB-INS20BE 20ELB-INS25G ELB-INS25BE 25

Box - Angle

Galv Black Size (mm)BA20G BA20BE 20BA25G BA25BE 25

Box - Back Outlet

Galv Black Size (mm)BBO20G BBO20BE 20

Box - H

Galv Black Size (mm)BH20G BH20BE 20BH25G BH25BE 25

Box - Intersection

Galv Black Size (mm)BC20G BC20BE 20BC25G BC25BE 25

Box Lids & GasketsBox LidGalv Black SizeLIDGALV LIDBE CircularGasketGalv MaterialGASK Rubber

Box - Loopin

Galv Size BOX-LOOP 1 Hole K/O

Box - Tee

Galv Black Size (mm)BTEE20G BTEE20BE 20BTEE25G BTEE25BE 25

Box - Terminal Back Outlet

Galv Black Size (mm)BTB20G BTB20BE 20

Box - Terminal

Galv Black Size (mm)BT20G BT20BE 20BT25G BT25BE 25

Box - Through

Galv Black Size (mm)BTH20G BTH20BE 20BTH25G BTH25BE 25

Box - U

Galv Black Size (mm)UB20G UB20BE 20UB25G UB25BE 25

Box - YGalv Black Size (mm)YB20G YB20BE 20YB25G YB25BE 25

Couplers - SolidGalv Black Size (mm)CPL20G CPL20BE 20CPL25G CPL25BE 25

CABLE MANAGEMENT


Boxes - AdaptableCode Size (mm) AB331.5GA 75 X 75 X 37.5AB332GA 75 X 75 X 50AB333GA 75 X 75 X 75AB441.5GA 100 X 100 X 37.5AB442GA 100 X 100 X 50

Code Size (mm)AB443GA 100 X 100 X 75AB662GA 150 X 150 X 50 AB663GA 150 X 150 X 75AB963GA 225 X 150 X 75AB993GA 225 X 225 X 75

Bush - BrassCode Description Size MBB20S Male Brass Bush - Short 20mmMBB25S Male Brass Bush - Short 25mmMBB32S Male Brass Bush - Short 32mmMBB1.5S Male Brass Bush - Short 1 1/2”MBB2S Male Brass Bush - Short 2”MBB20L Male Brass Bush - Long 20mmMBB25L Male Brass Bush - Long 25mmMBB32L Male Brass Bush - Long 32mm

Code Description Size MBB1.5L Male Brass Bush - Long 1 1/2”MBB2L Male Brass Bush - Long 2”FBB20 Female Brass Bush 20mmFBB25 Female Brass Bush 25mmFBB32 Female Brass Bush 32mmFBB1.5 Female Brass Bush 1 1/2”FBB2 Female Brass Bush 2”

Crampets - Flat

Galv Black Size (mm)CRAM20G CRAM20BE 20CRAM25G CRAM25BE 25

Dome Covers

Galv Black Size (mm)DC20G DC20BE 20

Hooks - Male

Galv Black Size (mm)HK20G HK20BE 20

Hook Plates

Galv Black Size (mm)H-PLG H-PLBE 20

Jack Chain (10m)

Galv Black Size JC0 JC0B No. 8JC1 JC1B No.10

Galv Black SizeL-N16G - 16mmL-N20G L-N20BE 20mmL-N25G L-N25BE 25mmL-N32G L-N32BE 32mmL-N1.5G L-N1.5BE 1 1/2”L-N2G L-N2BE 2”

Locknuts

Lockrings (Milled Edge)Code Finish Size L-R20 BZP 20mmL-R25 BZP 25mmL-R32 BZP 32mmL-R1.5 BZP 1.5”L-R2 BZP 2”

Nipples - ScrewedGalv Length (mm) Size (mm)NIP20 - 20NIP25 - 25NIP20L 300 20NIP25L 300 25


Trench - Pre-Galv Lighting Trunking

Trench - Pre-Galv Lighting Trunking Components

Code Description Size WxD (mm)LT1.0G-3.66 Lighting Trunking - 3.66m 50x50LTGC Lighting Trunking Galv Cover - 2m 50LTPC Lighting Trunking Plastic Cover - 2m 50

Code Description Size WxD (mm)LA90T 90 Degree Flat Bend 50x50LA90I 90 Degree Internal Bend 50x50LA90E 90 Degree External Bend 50x50LAFT Flat Tee 50x50LA4WI Four Way Intersection 50x50LATH10 Stirrup Hanger 10mm Hole 50x50LAFS Fitting Suspension Units 50LASE Stop Ends 50x50LAOF Outlet Flange 50LALC Long Coupler 50x50

TRUNKING - LIGHTING

LA90TLA90I

LA90E

LAFT LA4WI

LAOFLASE

Saddles - Distance

Galv Black Size (mm)DIST-S20G DIST-S20BE 20DIST-S25G DIST-S25BE 25

Saddles - Spacer BarGalv Black Size (mm)SBS20G SBS20BE 20SBS25G SBS25BE 25

TRS Stuffing Gland

Plugs - Slotted

Tee - Inspection

Reducers - Hex

Galv TRS20TRS25TRS32

Finish BrassBrassBrass

Size (mm)202532

Galv SB20 SB25

Finish BrassBrass

Size (mm)2025

Galv Black Size (mm)T-INS20G T-INS20BE 20T-INS25G T-INS25BE 25

Galv RED20-25RED20-32RED25-32

Size (mm)25-2032-2032-25

CABLE MANAGEMENT


Unistrut® - Single Compartment Trunking

Unistrut® - Trunking 90º External Cover Bend

Unistrut® - Trunking Stop End

Unistrut® - Trunking 90º Internal Cover Bend

Unistrut® - Trunking Top Cover Square Tee Joint

Unistrut® - Trunking Crossover

Pre Galv steel trunking. Each trunking length is supplied with connector, cover and fixings. Twin & three compartment trunking available on request. Many other sizes are available on request.

Pre-Galv. Many other sizes are available on request.





CodeUMG22UMG33UMG44UMG66

Width (mm)5075100150

Depth (mm)5075100150

Length (m)3333

Code Size WxD (mm)UMG22CGL 50x50UMG33CGL 75x75UMG44CGL 100x100UMG66CGL 150x150

Code Size WxD (mm)UMG22E 50x50UMG33E 75x75UMG44E 100x100UMG66E 150x150

Code Size WxD (mm)UMG22BGL 50x50UMG33BGL 75x75UMG44BGL 100x100UMG66BGL 150x150

Code Size WxD (mm)UMG22AST 50x50UMG33AST 75x75UMG44AST 100x100UMG66AST 150x150

Code Size WxD (mm)UMG22AGX 50x50UMG33AGX 75x75UMG44AGX 100x100UMG66AGX 150x150

Unistrut® - Trunking 90º Top Cover BendPre-Galv. Many other sizes are available on request.

Code Size WxD (mm)UMG22AGL 50x50UMG33AGL 75x75UMG44AGL 100x100UMG66AGL 150x150

Unistrut® - Trunking External Cover Tee Unistrut® - Trunking Internal Cover TeePre-Galv. Many other sizes are available on request.


Code Size WxD (mm)UMG22CGT 50x50UMG33CGT 75x75UMG44CGT 100x100UMG66CGT 150x150

Code Size WxD (mm)UMG22BGT 50x50UMG33BGT 75x75UMG44BGT 100x100UMG66BGT 150x150


Betaduct - Noryl Wiring Duct

Betaduct - PVC Wiring Duct - Closed Slot

The Noryl Betaduct range is free from toxic halogens, has excellent low smoke characteristics and high operating temperatures. Noryl Betaduct is recommended for areas when human life or electronic components are at risk.

Features: • For use when bundles, cables and wires need supporting in control panels, distribution boards and switchgear • Designed and specified for installations in hazardous applications such as rail, underground, marine, mass transit and military applications • Widely used in petrochemical plants and off shore oil and gas installations and accommodation modules • Available in open slot in 6 sizes with 19mm slot pitching and 8mm slot width • Colour - BlackTechnical: • Material: Self-Extinguishing, Noryl Extra, Halogen-Free • Service Temperature: -30˚C to +120˚C • Flammability: UL94 V-0 Rated Material. BS 476 Part 7 Class I (Y) • Standards: UL and Lloyds Register. Base slots to DIN 43659

Closed slot PVC Betaduct provides a lightweight self extinguishing cable trunking with excellent rigidity and performance characteristics. It has excellent cable retention with enhanced protection for installers.

Features: • Available in 25 sizes • Supplied with lid • For use when bundles, cables and wires need supporting in control panels, distribution boards and switchgear • Ideal for all panel building applications • Available in Grey (RAL7030), White & Black

Technical: • Material: Self-extinguishing PVC • Temperature Range: -15˚C to +60˚C • Flammability: UL94 V-O Rated Material • Certification: Base Slots to DIN 43659, RoHS, CSA, UL and Lloyds Register Approved

Code - Code - Code - Nominal Size Nominal SizeOpen Slot Closed Slot Solid Wall Inner (WxH) (mm) External (WxH) (mm)23461000 23451000 - 25 x 37.5 29 x 3823462000 23452000 23472000 25 x 50 29 x 5423463000 23453000 23473000 25 x 75 29 x 7923464000 23454000 23474000 50 x 50 54 x 5423465000 23455000 23475000 50 x 75 54 x 7923466000 23456000 23476000 75 x 75 80 x 80

Nominal Size Nominal SizeCode - Black Code - Grey Inner (WxH) (mm) External (WxH) (mm)9000000 10460011 15 x 15 17 x 179500000 10460018 19 x 50 25 x 539010000 10460021 25 x 20 29 x 239510000 10460022 25 x 37.5 29 x 419030000 10460023 25 x 50 29 x 549040000 10460024 25 x 75 29 x 799530000 10460025 25 x 100 30 x 1059540000 10460032 37.5 x 37.5 37.5 x 37.59550000 10460033 37.5 x 50 41 x 549560000 10460034 37.5 x 75 39 x 799570000 10460035 37.5 x 100 43 x 1059380000 10460051 50 x 25 54 x 289590000 10460052 50 x 37.5 54 x 41

Nominal Size Nominal SizeCode - Black Code - Grey Inner (WxH) (mm) External (WxH) (mm)9060000 10460053 50 x 50 54 x 549070000 10460054 50 x 75 55 x 799620000 10460055 50 x 100 56 x 1059630000 10460072 75 x 37.5 78 x 419640000 10460073 75 x 50 78 x 549090000 10460074 75 x 75 80 x 809660000 10460075 75 x 100 80 x 1059680000 10460103 100 x 50 107 x 549690000 10460104 100 x 75 107 x 809700000 10460105 100 x 100 107 x 1059710000 10460106 100 x 125 107 x 1309400000 10460124 125 x 75 131 x 78

WIRE DUCTING

CABLE MANAGEMENT


Betaduct - PVC Wiring Duct - Narrow Slot

Betaduct - PVC Wiring Duct - Open Slot

Narrow slot PVC Betaduct provides a lightweight self extinguishing cable trunking with excellent rigidity and performance characteristics. Ideal for use with slimmer terminal blocks where more access is required. It improves appearance of panels with cables out in best position.

Features: • Available in 20 sizes with 10mm slot pitching • Supplied with lid • Available in Grey (RAL7030), White, Black & Blue


Open Slot PVC Betaduct provides a lightweight self-extinguishing cable trunking with excellent rigidity and performance characteristics. For use when bundles, cables and wires need supporting in control panels, distribution boards and switchgear. Ideal for all panel building applications.

Features: • Wide fingers give additional cable support and terminated wires can be re-routed easily • Available with 20mm slot pitch, 8mm slot width in 23 sizes • Supplied with lid • Available in Grey (RAL7030), White, Black & Blue


Nominal Size Nominal SizeCode - Black Code - Grey Inner (WxH) (mm) External (WxH) (mm)10490018 10470018 19 x 50 25 x 5310490022 10470022 25 x 37.5 29 x 4110490023 10470023 25 x 50 29 x 5410490024 10470024 25 x 75 29 x 7910490025 10470025 25 x 100 30 x 10510490032 10470032 37.5 x 37.5 41 x 4110490033 10470033 37.5 x 50 41 x 5410490034 10470034 37.5 x 75 39 x 7910490035 10470035 37.5 x 100 43 x 10510490052 10470052 50 x 37.5 54 x 41

Nominal Size Nominal SizeCode - Black Code - Grey Inner (WxH) (mm) External (WxH) (mm)10490053 10470053 50 x 50 54 x 5410490054 10470054 50 x 75 55 x 7910490055 10470055 50 x 100 56 x 10510490072 10470072 75 x 37.5 80 x 4110490073 10470073 75 x 50 78 x 5410490074 10470074 75 x 75 80 x 8010490075 10470075 75 x 100 80 x 10510490103 10470103 100 x 50 107 x 5410490104 10470104 100 x 75 107 x 8010490105 10470105 100 x 100 107 x 104

Nom Size Nom SizeCode - Black Code - Grey Code - White In (WxH) (mm) Ext (WxH) (mm)9800000 10450018 - 19 x 50 25 x 539810000 10450022 23610400 25 x 37.5 29 x 419130000 10450023 23610500 25 x 50 29 x 549140000 10450024 23610600 25 x 75 29 x 799830000 10450025 23610700 25 x 100 30 x 1059840000 10450032 23610900 37.5 x 37.5 41 x 419850000 10450033 23611000 37.5 x 50 41 x 549860000 10450034 23611100 37.5 x 75 39 x 799870000 10450035 23611200 37.5 x 100 43 x 1059880000 10450051 23611300 50 x 25 54 x 289890000 10450052 23611400 50 x 37.5 54 x 419160000 10450053 23611500 50 x 50 54 x 54

Nom Size Nom SizeCode - Black Code - Grey Code - White In (WxH) (mm) Ext (WxH) (mm)9170000 10450054 23611600 50 x 75 55 x 799920000 10450055 23611700 50 x 100 56 x 1059930000 10450072 23611800 75 x 37.5 80 x 419940000 10450073 23611900 75 x 50 78 x 549190000 10450074 23612000 75 x 75 80 x 809960000 10450075 23612100 75 x 100 80 x 10590980000 10450103 23612400 100 x 50 107 x 549990000 10450104 23612500 100 x 75 107 x 8010000000 10450105 23612600 100 x 100 107 x 10410010000 10450106 23613000 100 x 125 107 x 1309410000 10450124 23612900 125 x 75 131 x 78


Betaduct - PVC Wiring Duct - Solid WallSolid Wall PVC Betaduct provides a lightweight self-extinguishing cable trunking with excellent rigidity and performance characteristics. Solid wall design fully encloses cables providing maximum protection.

Features: • Available in 25 sizes • Available in Grey (RAL7030) & Black • Supplied with lid • Ideal for use where little or no breakouts are required when bundles, cables and wires need supporting in control panels, distribution boards and switchgear • Ideal for all panel building applicationsTechnical: • Material: Self-extinguishing PVC • Temperature Range: -15˚C to +60˚C • Flammability: UL94 V-O Rated Material • Certification: Base Slots to DIN 43659, RoHS, CSA, UL and Lloyds Register Approved Nominal Size Nominal SizeCode - Black Code - Grey Inner (WxH) (mm) External (WxH) (mm)9200000 10480011 15 x 15 17 x 1710100000 10480018 19 x 50 25 x 539210000 10480021 25 x 20 29 x 2310110000 10480022 25 x 37.5 29 x 419230000 10480023 25 x 50 29 x 549240000 10480024 25 x 75 29 x 7910130000 10480025 25 x 100 30 x 10510140000 10480032 37.5 x 37.5 37.5 x 37.510150000 10480033 37.5 x 50 41 x 5410160000 10480034 37.5 x 75 39 x 7910170000 10480035 37.5 x 100 43 x 10510180000 10480051 50 x 25 54 x 2810190000 10480052 50 x 37.5 54 x 41

Nominal Size Nominal SizeCode - Black Code - Grey Inner (WxH) (mm) External (WxH) (mm)9260000 10480053 50 x 50 54 x 549270000 10480054 50 x 75 55 x 7910220000 10480055 50 x 100 56 x 10510230000 10480072 75 x 37.5 78 x 4110240000 10480073 75 x 50 78 x 549290000 10480074 75 x 75 80 x 8010260000 10480075 75 x 100 80 x 10510280000 10480103 100 x 50 107 x 5410290000 10480104 100 x 75 107 x 8010300000 10480105 100 x 100 107 x 10510310000 10480106 100 x 125 107 x 1309420000 10480124 125 x 75 131 x 78

WIRE DUCTING - ACCESSORIESBetaduct - PVC Wiring Duct - Dividers

Betaduct - PVC Wiring Duct - Dividers

Betaduct - PVC Wiring Duct - Lids

2m Lengths

Code - Black Code - Grey Duct Height (mm)10380000 10450008 3510390000 10450009 5010400000 10450010 75

Code Description18580000 Riveter18570000 Side Cutters

Code Description10500000 Rivets 10440000 Insulating Washers

2m LengthsCode - Grey Code - Black Code - Blue Code - White Width (mm)10450001 9310000 - - 15- 9310019 - 23620019 1910450002 9330000 9336000 23620003 2510450003 9320000 10456003 23620004 37.510450004 9340000 9346000 23620005 5010450005 9350000 9356000 23620006 7510450006 9360000 10456006 23620007 10010450007 9370000 - 23620008 125

FLEXIBLE CABLE & PIPE SEALS - CSD

FLEXIBLE CABLE &PIPE SEALS - ROXTEC

FRAMES - REGULAR - ROUND

CABLE SEALING SYSTEMS

FLEXIBLE CABLE AND PIPE SEALS - CSDCSD - RISE Duct Sealing System

CSD - RISE Insert Sleeves

Code - Gas & Water Tight Code - Fire, Gas & Water Tight Duct Size (mm)RISEDUCTSEAL100WG RISEDUCTSEAL100F 100RISEDUCTSEAL110WG RISEDUCTSEAL110F 110RISEDUCTSEAL125WG RISEDUCTSEAL125F 125RISEDUCTSEAL150WG RISEDUCTSEAL150F 150RISEDUCTSEAL160WG RISEDUCTSEAL160F 160RISEDUCTSEAL180WG RISEDUCTSEAL180F 180RISEDUCTSEAL200WG RISEDUCTSEAL200F 200RISEDUCTSEAL225WG RISEDUCTSEAL225F 225RISEDUCTSEAL250WG RISEDUCTSEAL250F 250RISEDUCTSEAL300WG RISEDUCTSEAL300F 300

Code Size12/6X160 12/6 x 160mm 14/8X160 14/8 x 160mm 16/10X160 16/10 x 160mm 18/12X160 18/12 x 160mm 20/14X160 20/14 x 160mm 22/16X160 22/16 x 160mm 27/19X160 27/19 x 160mm 31/23X160 31/23 x 160mm

Code Size35/27X160 35/27 x 160mm 39/31X160 39/31 x 160mm 46/36X160 46/36 x 160mm 52/42X160 52/42 x 160mm 58/48X160 58/48 x 160mm 64/54X160 64/54 x 160mm 70/60X160 70/60 x 160mm FIWA Sealant Cartridge (310ml)

The RISE Duct Seal is a multi-cable and pipe transit sealing system, delivering proven technology and lifetime performance.

It provides an effective and simple solution to all fireproof, gas tight and water tight duct sealing requirements.

It consists of only two components: RISE rubber insert sleeves, used to guarantee cable separation and as a backing for the sealant layer, and FIWA sealant, a high quality silicone based, fire resistant, water repellent sealant which consequently makes the system quick and easy to install.

Using the CSD fire resistant RISE insert sleeves at a length of 160mm and applying sealant to both faces of the opening, will provide a fire stopping seal.

When exposed to heat or flame, the advanced rubbers used within the system will resist heat and flame, assuring total conduit sealing protection against fire, heat, toxic and corrosive gases.

Features: • Ensures DSEAR compliance even in heavily filled cable ducts • Easy re-entry for adding, removing or replacing cables • Provides 50 years protection with no maintenance • High levels of water and gas tightness • Up to four hours fire protection when using the RISE fire resistant sleeves - FRR/LEHF • Quick and easy to install in both horizontal and vertical dutcs • No frame required • Seals ducts when there is running water • Suitable for Trefoil and large power cables • Resistant to Methane, Hydrogen Sulphide and Chlorine • Resistant to submersion in petrol, diesel and transformer oils • Complies with ATEX standards

Technical: • Certification: - Lloyds Register - 1.5 & 2.5 Bar pressure tests with multiple services passing through the conduit - TNO Laboratory - Age Tested to prove sealing performance for 50 years - TNO Laboratory - Submersion test in petrol and diesel oils - TNO Laboratory - Resistance to salt laden atmospheres and solar radiation - BS EN1366-3 Fire Test - 4 hour fire protection - DEF Stan 02-711 - Low Smoke Index - DEF Stan 02-713 - Low Toxicity Index - ISO4589-3 - High Temperature Index - ISO4589-2 - High Oxygen Index

• Certified Pressure Resistance - 2.5 bar • 4 Hours fire protection




FLEXIBLE CABLE & PIPE SEALS - ROXTEC

Roxtec - RM Modules

No of For Cable/Pipe External DimensionsCode - With Core Module Cables/Pipes Diameter (mm) (H x W x D) (mm) Weight (kg)RM00100151000 RM 15 1 3.0 - 11.0 15 x 15 x 60 0.01 - 0.02RM00115401000 RM 15w40 3 3.5 - 10.5 15 x 40 x 60 0.04 - 0.05RM00100201000 RM 20 1 4.0 - 14.5 20 x 20 x 60 0.02 - 0.04RM00120401000 RM 20w40 2 3.5 - 16.5 20 x 40 x 60 0.04 - 0.07RM00100301000 RM 30 1 10.0 - 25.0 30 x 30 x 60 0.04 - 0.08RM00100401000 RM 40 1 21.5 - 34.5 40 x 40 x 60 0.07 - 0.14RM00140101000 RM 40/10-32 1 9.5 - 32.5 40 x 40 x 60 0.07 - 0.14RM00100601000 RM 60 1 28.0 - 54.0 60 x 60 x 60 0.13 - 0.33RM00160201000 RM 60/24-54 1 24.0 - 54.0 60 x 60 x 60 0.13 - 0.33RM00100901000 RM 90 1 48.0 - 71.0 90 x 90 x 60 0.39 - 0.72RM00101201000 RM 120 1 67.5 - 99.0 120 x 120 x 60 0.62 - 1.25

Code - Solid Compensation Modules Module External Dims (H x W x D) (mm) Weight (kg)RM00305241000 RM 5/0x24 5 x 120 x 60 0.06RM00310121000 RM 10/0x12 10 x 120 x 60 0.12RM00300151000 RM 15/0 15 x 15 x 60 0.02RM00300201000 RM 20/0 20 x 20 x 60 0.04RM00300301000 RM 30/0 30 x 30 x 60 0.08RM00300401000 RM 40/0 40 x 40 x 60 0.15RM00300601000 RM 60/0 60 x 60 x 60 0.33

The Roxtec sealing system is developed to protect life and assets. It is adaptable to cables and pipes of different sizes. The certified solutions are used to ensure safety, efficiency and operational reliability in a wide range of projects worldwide.

Sealing modules for use with Roxtec frames.

• Adaptable sealing modules for (0.118”-3.898”) OD cables and pipes 3.0-99.0 mm • A Roxtec sealing module consists of two halves, and has removable layers and a center core. • Thanks to this technology called Multidiameter™, one single module can seal a cable or pipe over a span of several different diameters simply by peeling layers from the module halves. This ensures a perfect fit. • For use with Group RM components • The Roxtec modules are used together with a frame and a compression unit

R&M WEBSITE TECHNICAL AREAThe technical area of R&M’s website is specifically designed to focus on the diverse specialist markets supplied by R&M. This area has particular relevance to those working in hazardous areas, both in the international and domestic markets.

Please go to www.rm-electrical.com to visit our technical area.


CABLE SEALING SYSTEM FRAMESRoxtec - Regular Frames - G Range

Roxtec - Regular Frames - S Range

Code - Primed Frame Ex Dims Mild Steel Frame Openings (H x W x D) (mm)G002000000112 G 2 x 1 Primed 1 221 x 241 x 60G002000000212 G 2 x 2 Primed 2 233 x 383 x 60G002000000312 G 2 x 3 Primed 3 233 x 514 x 60G002000000412 G 2 x 4 Primed 4 233 x 644 x 60G004000000112 G 4 x 1 Primed 1 280 x 241 x 60G004000000212 G 4 x 2 Primed 2 292 x 383 x 60G004000000312 G 4 x 3 Primed 3 292 x 514 x 60G004000000412 G 4 x 4 Primed 4 292 x 644 x 60G004000000512 G 4 x 5 Primed 5 292 x 775 x 60G004000000612 G 4 x 6 Primed 6 292 x 905 x 60

Code - Primed Frame Ex Dims Mild Steel Frame Openings (H x W x D) (mm)G006000000112 G 6 x 1 Primed 1 338 x 241 x 60G006000000212 G 6 x 2 Primed 2 350 x 383 x 60G006000000312 G 6 x 3 Primed 3 350 x 514 x 60G006000000412 G 6 x 4 Primed 4 350 x 644 x 60G006000000512 G 6 x 5 Primed 5 350 x 775 x 60G006000000612 G 6 x 6 Primed 6 350 x 905 x 60G008000000112 G 8 x 1 Primed 1 398 x 241 x 60G008000000212 G 8 x 2 Primed 2 410 x 383 x 60G008000000312 G 8 x 3 Primed 3 410 x 514 x 60G008000000412 G 8 x 4 Primed 4 410 x 644 x 60

Code - Primed Frame Ex Dims Mild Steel Frame Openings (H x W x D) (mm) SS01000000112 S 1 x 1 Primed 1 121 x 80 x 60S002000000112 S 2 x 1 Primed 1 121 x 141 x 60S002000000212 S 2 x 2 Primed 2 121 x 271 x 60S002000000312 S 2 x 3 Primed 3 121 x 402 x 60S002000000412 S 2 x 4 Primed 4 121 x 532 x 60S002000000512 S 2 x 5 Primed 5 121 x 663 x 60S002000000612 S 2 x 6 Primed 6 121 x 793 x 60SS03000000112 S 3 x 1 Primed 1 180 x 80 x 60S004000000112 S 4 x 1 Primed 1 180 x 141 x 60

Code - Primed Frame Ex Dims Mild Steel Frame Openings (H x W x D) (mm) S004000000212 S 4 x 2 Primed 2 180 x 271 x 60S004000000312 S 4 x 3 Primed 3 180 x 402 x 60S004000000412 S 4 x 4 Primed 4 180 x 532 x 60S004000000512 S 4 x 5 Primed 5 180 x 663 x 60S004000000612 S 4 x 6 Primed 6 180 x 793 x 60S004000000712 S 4 x 7 Primed 7 180 x 924 x 60S004000000812 S 4 x 8 Primed 8 180 x 1054 x 60S004000000912 S 4 x 9 Primed 9 180 x 1185 x 60Available in acid proof stainless steel and aluminium

The Roxtec G frame is a flanged metal frame available with a single opening or in combinations with several openings in width and/or height.

The Roxtec S frame is a metal frame without flange, intended for welding to the construction. It is available as a single opening frame, or in combinations with several openings in width and/or height.

Features: • For use with Group RM components • Attachment by bolting, casting or welding • Casting mould accessory available • GE extension frame accessory available • Available in acid proof stainless steel and aluminium

Technical: • Fire: A-Class, EI 60/120, UL1479 • Water pressure: 4 bar • Gas pressure: 2.5 bar • For an EMC-solution we recommend G frames in galvanised mild steel or acid proof stainless steel

Features: • For use with Group RM components • Attachment by welding • SE PPS accessory available for plastic pipe seals

Technical: • Fire: A-Class, H-Class • Water pressure: 4 bar • Gas pressure: 2.5 bar

For an EMC-solution we recommend S frame in stainless steel

Code Frame For Hole Diameter (mm)R000001001018 R 100 Galv 100 - 102R000001251018 R 125 Galv 125 - 127R000001271018 R 127 Galv 127 - 129R000001501018 R 150 Galv 150 - 152R000002001018 R 200 Galv 200 - 202

Code Description External Dim (mm)AWK0001201018 Wedge Kit Galv - 120 Wedge/Stayplates/Wedge Clip/Lubricant 120ARW0001201018 Wedge 120 Galv 120 4.724 0.8 1.764 120ARW0000601018 Wedge 60 Galv 60 2.362 0.4 0.882 605ARW000001851 Wedge 20LR 120 Galv 120

Features: • Supplied with a net installed on the back side as protection during horizontal installations (except R 70 and R 75) • The frame can be cut open for installation around existing cables or pipes • For use with RM modules • Pipe sleeve accessory available • Galvanised

Technical: • Fire: A-Class, H-Class, EI 60/120, UL1479 • Water pressure: 4 bar • Gas pressure: 2.5 bar

The Roxtec Wedge is used in frames with a rectangular packing space without built-in compression. Compresses and seals the installation of cables, pipes, modules and stayplates.

• For use with Group RM frames and components • Wedge r20 available for SRC r20 frames

Roxtec - Round Frames - R Range

Roxtec - Wedge/Wedge Kits

For the SRC r40 Version please call for details


Roxtec - Regular Frames - SRC Range

Code - Primed Frame Ex Dims (mm) Mild Steel Frame Openings (H x W x D)SRC4000020112 SRC 4 x 1 R20 Primed 1 180 x 141 x 60SRC4000020212 SRC 4 x 2 R20 Primed 2 180 x 271 x 60SRC4000020312 SRC 4 x 3 R20 Primed 3 180 x 402 x 60SRC4000020412 SRC 4 x 4 R20 Primed 4 180 x 532 x 60SRC4000020512 SRC 4 x 5 R20 Primed 5 180 x 663 x 60SRC4000020612 SRC 4 x 6 R20 Primed 6 180 x 793 x 60SRC6000020112 SRC 6 x 1 R20 Primed 1 238 x 141 x 60SRC6000020212 SRC 6 x 2 R20 Primed 2 238 x 271 x 60SRC6000020312 SRC 6 x 3 R20 Primed 3 238 x 402 x 60

Code - Primed Frame Ex Dims (mm) Mild Steel Frame Openings (H x W x D)SRC6000020412 SRC 6 x 4 R20 Primed 4 238 x 532 x 60SRC6000020512 SRC 6 x 5 R20 Primed 5 238 x 663 x 60SRC6000020612 SRC 6 x 6 R20 Primed 6 238 x 793 x 60SRC8000020112 SRC 8 x 1 R20 Primed 1 298 x 141 x 60SRC8000020212 SRC 8 x 2 R20 Primed 2 298 x 271 x 60SRC8000020312 SRC 8 x 3 R20 Primed 3 298 x 402 x 60SRC8000020412 SRC 8 x 4 R20 Primed 4 298 x 532 x 60SRC8000020512 SRC 8 x 5 R20 Primed 5 298 x 663 x 60SRC8000020612 SRC 8 x 6 R20 Primed 6 298 x 793 x 60

The Roxtec SRC frame has rounded corners to reduce stress concentration in load bearing structures. This reduces the risk of cracks around the transit.

Features: • Available in two standard versions: SRC r20 & SRC r40 • For use with Group RM components • Attachment by welding

Technical: • Fire: A-Class, H-Class • Water pressure: 4 bar • Gas pressure: 2.5 bar


ENCLOSURES - RITTAL®

ENCLOSURES - SCHNEIDER

ENCLOSURES - WEIDMULLER

JUNCTION BOXES -HAZARDOUS AREA

JUNCTION BOXES - FULLY POPULATED HAZARDOUS AREA

ENCLOSURES & JUNCTION BOXES



ENCLOSURES - RITTAL®Rittal® - AE Range of Compact Enclosures - Sheet Steel

Rittal® - KL Range of Terminal Boxes

A successful enclosure range for wall and pole mounting. A secure locking system, foamed-on gasket and knife-edge perimeter ensure NEMA protection ratings. Features include cold rolled steel body, steel doors, mounting panels and pre-installed cable entry panels.AE enclosures are available in stainless or sheet steel. It can be specified with the protection category IP 69K. Various other protection categories are available, depending on the design: IP 66, IP 56, IP 55, NEMA 12 and NEMA 4.

Terminal boxes with screw-fastened lid and profile strips with mounting holes on both sides for the installation of cross rails or mounting plate.

Other sizes, finishes and a full range of accessories available - please call for details


Features: • Door enclosures, may be swapped to opposite side (except AE1032.500 and AE1035.500) • Cold rolled steel body, steel doors, mounting panels and pre-installed cable entry panels • Supply Includes: Enclosure of all-round solid construction, Single-door: 1 gland plate, Twin-door: 2 gland plates in the enclosure base & 3-point lock system

Technical: • Enclosure Material: Sheet steel • Door Material: Sheet steel, all-round foamed-in PU seal • Enclosure and door surface finish: Dipcoat primed, powder-coated in textured RAL 7035 on the outside • Mounting plate: Zinc-plated • Protection: IP66 – NEMA 4 except certain models with double doors IP 55 – NEMA 12

Features: • Cover may be opened and securely locked in a flash, with the new quick-action screw • 1/4 turn instead of thread ensures correct contact pressure of the seal • Electrophoretic dipcoat priming and powder coating – reliable surface protection thanks to even coating in all the corners and edges • Supply includes enclosure, cover with all-round foamed-in PU seal and cover screws, including plastic bushes • Available in stainless steel - please call for details

Technical: • Enclosure Material: Sheet steel • Door Material: Sheet steel, all-round foamed-in PU seal • Enclosure and door surface finish: Dipcoat primed, powder-coated in textured RAL 7035 on the outside • Protection: IP66 without gland plate, NEMA 4 and IP55 with gland plate, NEMA 12 • Protection: IP66 – NEMA 4 except certain models with double doors IP 55 – NEMA 12

Code Size (W x H x D) (mm) AE 1032.500 200 x 300 x 120AE 1035.500 200 x 300 x 155AE 1033.500 300 x 300 x 210AE 1034.500 300 x 400 x 210AE 1030.500 380 x 300 x 155AE 1031.500 380 x 300 x 210AE 1380.500 380 x 380 x 210

Code Size (W x H x D) (mm) AE 1038.500 380 x 600 x 210AE 1045.500 400 x 500 x 210AE 1050.500 500 x 500 x 210AE 1350.500 500 x 500 x 300AE 1057.500 500 x 700 x 250AE 1039.500 600 x 380 x 210AE 1060.500 600 x 600 x 210

Code Size (W x H x D) (mm) AE 1076.500 600 x 760 x 210AE 1058.500 600 x 800 x 250AE 1077.500 760 x 760 x 210AE 1073.500 760 x 760 x 300AE 1180.500 800 x 1000 x 300AE 1280.500 800 x 1200 x 300

Code Dimensions (W x H x D) (mm)KL 1501.510 300 x 150 x 120 KL 1502.510 200 x 200 x 120 KL 1503.510 300 x 200 x 120


Rittal® - KS Range of Plastic Enclosures (Without Viewing Window)

Rittal® - TS8 Baying Enclosure System (Single Door)

Enclosure of solid all-round construction, R/H Door hinge, door hinge may be swapped to opposite site by rotating the enclosure, mounting plate, all-round foamed-in PU seal in the door, twin seal on the top and bottom edges of the door (integral rain protection).

Comprehensive line of industrial grade enclosures and accessories to fit any environment. Its ingenious design principle – proven a million times over – has turned it into a classic. Thanks to a host of innovative details, this system is a flexible, cost-effective and secure enclosure solution. Rittal® TS8 Baying System Industrial Enclosures provide a complete, customizable housing solution for switchgear and electrical equipment. These fully rated enclosures support a wide range of accessories and cooling products to keep valuable equipment safely secured and functioning in inhospitable environments.



Features: • C sections for infinitely variable mounting plate depth adjustment, and to create several mounting levels • Twin seal on the top and bottom edges of the door in all enclosures, thanks to the integral rain protection strip • Mounting inserts for threaded inserts in the door and in the rear panel of the enclosure, for simple installation • Available with viewing window on request

Technical: • Material: Enclosure and door - Fibreglass-reinforced unsaturated polyester Mounting plate - Sheet steel • Protection: IP 66 to EN 60 529/10.91, Complies with NEMA 4x

Features: • Designed for use in some of the world’s most demanding environments • 16-fold tubular frame and multi-level mounting capabilities provide unsurpassed strength and exceptional durability • Zinc plated mounting panel is constructed from durable 11-gauge sheet steel to support weight loads up to 1,500 lbs. • 25mm hole pattern provides maximum space utilization for mounting a wide range of components, cable management accessories, and hardware • Symmetrical frame allows enclosure to be bayed side-by-side, back-to-back, or neatly placed in a corner • Unique 4-point locking system and foamed-in-place polyurethane gasket create a perfect seal every time you close the door • Dipcoat-primed and finished in a textured, light gray powder-coat to provide long-lasting quality and corrosion resistance • Cable entry gland plates on the bottom provide easy wiring and cable access • cULus Type 12 protection rated • NEMA 12 protection rated • Supply Includes: Enclosure frame with doors, 3mm double-bit lock insert, Mounting and gland plates, Rear panel, Roof plate & EyeboltsTechnical: • Material: Enclosure frame, roof, rear panel and gland plates - Sheet steel, 1.5mm Door - Sheet steel, 2.0mm Mounting plate - Sheet steel 3.0 • Surface finish: Enclosure frame: Dipcoat primed Door, roof and rear panel: Dipcoat primed, powder-coated in textured RAL 7035 on the outside • Protection: IP 55 to EN 60 529, NEMA 12 is met

Code Size (W x H x D) (mm) KS 1423.500 200 x 300 x 150KS 1432.500 250 x 350 x 150KS 1434.500 300 x 400 x 200KS 1444.500 400 x 400 x 200KS 1446.500 400 x 600 x 200

Code Size (W x H x D)(mm) KS 1453.500 500 x 500 x 300KS 1466.500 600 x 600 x 200KS 1468.500 600 x 800 x 300KS 1480.500 800 x 1000 x 300KS 1400.500 1000 x 1000 x 300

Code Size (W x H x D) (mm) TS 8084.500 1000 x 1800 x 400TS 8606.500 600 x 2000 x 600TS 8608.500 600 x 2000 x 800

Code Size (W x H x D) (mm) TS 8605.500 600 x 2000 x 500TS 8685.500 600 x 1800 x 500TS 8845.500 800 x 1400 x 500



Schneider - Spacial S3D Wall-Mounting Steel Enclosures

Schneider - Spacial S3X Wall-Mounting Stainless Steel Enclosures

Schneider’s Spacial S3D is designed to protect your equipment in most indoor installations with harsh & dirty environments, such as machines, manufacturing plants, logistics centres etc.

These enclosures have been specially designed for the chemical, oil and food and beverage industries, among others, which are particularly demanding in terms of hygiene and resistance to corrosion. Available in AISI 304L or AISI 316L Versions (with Scotch-Brite® brushed finish)

Code - with Dimensions Code - PlainMounting Plate (W x H x D)(mm) Mounting PlateNSYS3D3215P 200 X 300 X 150 NSYMM32NSYS3D3315P 300 X 300 X 150 NSYMM33NSYS3D3420P 400 X 300 X 200 NSYMM43NSYS3D4315P 300 X 400 X 150 NSYMM43NSYS3D4320P 300 X 400 X 200 NSYMM43NSYS3D4420P 400 X 400 X 200 NSYMM44NSYS3D5420P 400 X 500 X 200 NSYMM54NSYS3D5425P 400 X 500 X 250 NSYMM54

Code - with Dimensions Code - PlainMounting Plate (W x H x D)(mm) Mounting PlateNSYS3D5520P 500 X 500 X 200 NSYMM55NSYS3D6420P 400 X 600 X 200 NSYMM65NSYS3D6425P 400 X 600 X 250 NSYMM64NSYS3D6620P 600 X 600 X 200 NSYMM66NSYS3D6625P 600 X 600 X 250 NSYMM66NSYS3D8625P 600 X 800 X 250 NSYMM86NSYS3D8830P 600 X 800 X 300 NSYMM86NSYS3D10830P 800 X 1000 X 300 NSYMM108

Code - with Dimensions Code - PlainMounting Plate (W x H x D)(mm) Mounting PlateNSYS3X3215H 200 x 300 x 150 NSYMM32NSYS3X3315H 300 x 300 x 150 NSYMM33NSYS3X4315H 300 x 400 x 150 NSYMM43NSYS3X4320H 300 x 400 x 200 NSYMM43NSYS3X4420H 400 x 400 x 200 NSYMM44NSYS3X5420H 400 x 500 x 200 NSYMM54

Code - with Dimensions Code - PlainMounting Plate (W x H x D)(mm) Mounting PlateNSYS3X6420H 400 x 600 x 200 NSYMM64NSYS3X7525H 500 x 700 x 250 NSYMM75NSYS3X4620H 600 x 400 x 200 NSYMM64NSYS3X6625H 600 x 600 x 250 NSYMM66NSYS3X8625H 600 x 800 x 250 NSYMM86NSYS3X8830H 800 x 800 x 300 NSYMM88

Features: • Range of 54 dimensions available • Available with plain or transparent doors, with or without mounting plate • A broad range of accessories to conform to all your applications • C/w Cable-gland plate as standard

Technical: • Protection: IP66 for single-door enclosures and IP55 for two door enclosures • Resistance to mechanical impacts: IK 10 plain door and IK 08 glazed door • Wall-mounting enclosure supplied with 3-mm double-bar lock as standard • Polyurethane door gasket • Colour: RAL 7035 grey; Finish: Structured • Fire class: M0

Features: • 304L Stainless Steel Version available with plain or glazed door (Securit® glass, 4mm thick) Please call for details • Standard lock with 3-mm double-bar lock (chrome-plated zamak)

Technical: • Protection rating of IP 66 for all single enclosures with single door and glazed door, IP 55 for the double door enclosures, according to IEC 60529 • Resistance to external mechanical impacts: – IK 10 for the solid-door enclosures – IK 08 for the glazed-door enclosures • Polyurethane gasket • Certifications: IEC 62208 - UL 508A - CAN/CSA 22 • Outdoor installation: compliant with IEC 62208 regarding type tests specified in §9.12 (resistance to ultra-violet (UV) radiation) and §9.13 (resistance to corrosion)



ENCLOSURES - SCHNEIDER


Schneider - Thalassa PLM Polyester Wall-Mounting Enclosures

Schneider - Thalassa TBP Thermoplastic Industrial Enclosures

Designed for energy distribution and control in Energy Infrastructures and Industry markets, indoor or outdoor use, in harsh conditions and environments and to avoid electrical risks. ATEX version for potentially explosive atmosphere (surface areas) available.

Polycarbonate for enhanced impact resistance and for outdoor applications or applications directly exposed to UV. Polycarbonate certified UL.

Code - Code - Dimensions PlainPlain Door Transparent Door (W x H x D)(mm) Mount PlateNSYPLM43 NSYPLM43T 330 x 430 x 200 NSYMM43NSYPLM54 NSYPLM54T 430 x 530 x 200 NSYMM54NSYPLM64 NSYPLM64T 436 x 647 x 250 NSYMM64

Code - Code - Dimensions PlainPlain Door Transparent Door (W x H x D)(mm) Mount PlateNSYPLM75 NSYPLM75T 536 x 747 x 300 NSYMM75NSYPLM86 NSYPLM86T 636 x 847 x 300 NSYMM86NSYPLM108 NSYPLM108T 852 x 1056 x 350 NSYMM108

Code - Low Cover Dimensions (W x H x D)(mm)NSYTBP885 89 x 89 x 54NSYTBP1397 93 x 138 x 72NSYTBP11116 116 x 116 x 62NSYTBP16128 121 x 164 x 87NSYTBP19128 121 x 192 x 87NSYTBP24198 194 x 241 x 87

Code - High Cover Dimensions (W x H x D)(mm)NSYTBP191610H 164 x 192 x 105NSYTBP241910H 194 x 241 x 107NSYTBP241912H 194 x 241 x 127NSYTBP292412H 241 x 291 x 128

Features: • Monobloc wall-mounting enclosure made from polyester reinforced with fibreglass, moulded by hot compression, RAL 7032 grey colour • Plane and transparent tempered-glass door versions available • Locking device outside the sealed area, guaranteeing the tightness of IP 66 over time • 8 dimensions from 310x215x160mm up to 1056x852x350mm • Bosses for fixation points are moulded, inserts included • 2 locks with double-bar insert or 1 lock with 3 action points • Version with metallic or bakelite mounting plate • ATEX black colour version, plain doorTechnical: • Protection: IP66 according to IEC 60529 • Resistance to external mechanical impacts:– Plain door enclosures IK 10 (20 joules) – Glazed door enclosures IK 08 (5 joules) according to IEC 62262 • Door opening angle: 180° • Total insulation suitable to produce class II assemblies • Self-extinguishibility: HB40 classified and 960º test withstanding • Certification of compliance with IEC62208 enclosure standard • UL/CUL certification

Features: • Large range of dimensions • High or low, opaque cover (transparent cover available - please call for details) Low Cover - suitable for boxes 54 to 128mm deep with 10-20mm covers High Cover - suitable for boxes 94 to 168mm deep with 40 to 80mm covers • Lockable • Colour: – Body: RAL 7035 grey – Cover: RAL 7035 grey or tinted transparent • Anti-condensation valves available as an accessory, prevent the build-up of moisture inside the box Technical: • IK 08 (5J) according to IEC 62262 • Glow wire resistance: 960 °C • Usage temperature: –25 °C to +80 °C • Installation temperature: –15 °C to +60 °C • Certified according to UL 508A. • IP 66 according to IEC 60529 • NEMA 44X according to Nema 250

• Class II according to IEC 61140 • Outdoor installation: compliant with IEC 62208 regarding type tests specified in §9.12 (resistance to ultra-violet (UV) radiation) and §9.13 (resistance to corrosion). It is always advisable to install a canopy to avoid water stagnation on the upper part of the enclosure • Insulating, halogen-free plastic materials • Resistance to chemical and atmospheric agents





Schneider - Thalassa TBS Thermoplastic Industrial EnclosuresABS enclosures for conventional applications (IK 07) with the usual constraints.

Code - Low Cover Dimensions (W x H x D)(mm)NSYTBS885 89 x 89 x 54NSYTBS11116 116 x 116 x 62NSYTBS1397 93 x 138 x 72NSYTBS16128 121 x 164 x 87NSYTBS19128 121 x 192 x 87NSYTBS24198 194 x 241 x 87

Code - High Cover Dimensions (W x H x D)(mm)NSYTBS191610H 164 x 192 x 105NSYTBS241910H 194 x 241 x 107NSYTBS241912H 194 x 241 x 127NSYTBS292412H 241 x 291 x 128

Features: • Large range of dimensions • High or low, opaque cover (transparent cover available - please call for details) Low Cover - suitable for boxes 54 to 128mm deep with 10-20mm covers High Cover - suitable for boxes 94 to 168mm deep with 40 to 80mm covers • Lockable • Colour: – Body: RAL 7035 grey – Cover: RAL 7035 grey or tinted transparent • Anti-condensation valves available as an accessory, prevent the build-up of moisture inside the box

Technical: • IK 07 (2J) according to IEC 62262 • Glow wire resistance: 650 °C according to IEC 60695-2-11 • Usage temperature: –25 °C to +60 °C • Installation temperature: –15 °C to +40 °C • Outdoor installation: compliant with IEC 62208 regarding type tests specified (resistance to ultra violet (UV) radiation) and (resistance to corrosion). It is always advisable to install a canopy to avoid water stagnation on the upper part of the enclosure • IP 66 according to IEC 60529 • NEMA 44X according to Nema 250 • Class II according to IEC 61140 • Insulating, halogen-free plastic materials • Resistance to chemical and atmospheric agents

R&M ASSEMBLY DIVISIONAssembly and Modifications of Enclosures for Hazardous Area and Industrial [email protected]


Weidmuller - Klippon® K - Aluminium EnclosureKlippon® K series enclosures can be used in a variety of applications, e.g. for mounting terminals, switches, power supplies, operational and display elements or electronic modules.

Technical Ex: • Enclosure material: High quality aluminium alloy (Al-Si12) • IP protection class: IP 66, IP 67 • Earthing outside: Earthing studs, M4 • Installation mounting: Flexible DIN rail mounting • Enclosure mounting:Direct mounting with optional mounting brackets (from a size of 120 x 122 x 81 Klippon® K 41) • Impact resistance: 7J • Gasket material: Silicone (VMQ) • Temperature range: -50 °C…+135 °C • Certification: ATEX Certificate: KEMA 02ATEX2088 U • Empty Enclosure - Ex ATEX Marking: II 2 G Ex e II IP66/IP67

Technical Standard: • Enclosure material: High quality aluminium alloy (Al-Si12) • IP protection class: IP 66, IP 67 and IP 68 • Installation mounting: Flexible DIN rail mounting • Enclosure mounting: Direct mounting with optional mounting brackets (from a size of 120 x 122 x 81 Klippon® K 41) • Impact resistance: 10J • Gasket material: Chloroprene / Silicone (VMQ) • Temperature range: -40 °C…+80 °C with chloroprene gasket /-50 °C…+135 °C with silicone gasket

Features: • 19 different sizes • Available in two surface finishes – un-painted and painted (please call for details on painted version) • Mounting holes not within the sealed area • Fastening thread to attach mounting rails and plates • Closed moulded gasket (no glue seam) • High IP protection up to IP 68 • Moulded silicone gasket for applications with high temperatures

• Alloy is resistant to salt water • Approved according to the latest international standards (e.g. ATEX, cULus, GOST) • Silicone moulded seal (CR moulded seal available)

ENCLOSURES - WEIDMULLER

Code - Ex Description Dims (L x W x D) (mm) 9526840000 K 1 Enclosure 70 x 70 x 459526860000 K 2 Enclosure 70 x 100 x 459526870000 K 21 Enclosure 80 x 125 x 579526880000 K 3 Enclosure 70 x 165 x 459526890000 K 31 Enclosure 80 x 175 x 579526900000 K 32 Enclosure 80 x 250 x 559526910000 K 4 Enclosure 82 x 130 x 729526920000 K 41 Enclosure 120 x 122 x 819526930000 K 5 Enclosure 130 x 170 x 909526940000 K 51 Enclosure 120 x 220 x 819526950000 K 52 Enclosure 160 x 160 x 919526960000 K 6 Enclosure 160 x 200 x 1009526970000 K 61 Enclosure 160 x 260 x 919526980000 K 7 Enclosure 160 x 350 x 1009526990000 K 71 Enclosure 230 x 280 x 111

Code - Standard Description Dims (L x W x D) (mm) 1939560000 K 1 Enclosure 70 x 70 x 451939580000 K 2 Enclosure 70 x 100 x 451939590000 K 21 Enclosure 80 x 125 x 571939600000 K 3 Enclosure 70 x 165 x 451939610000 K 31 Enclosure 80 x 175 x 571939620000 K 32 Enclosure 80 x 250 x 551939630000 K 4 Enclosure 82 x 130 x 721939640000 K 41 Enclosure 120 x 122 x 811939650000 K 5 Enclosure 130 x 170 x 901939660000 K 51 Enclosure 120 x 220 x 811939670000 K 52 Enclosure 160 x 160 x 911939690000 K 6 Enclosure 160 x 200 x 1001939700000 K 61 Enclosure 160 x 260 x 911939710000 K 7 Enclosure 160 x 350 x 1001939730000 K 71 Enclosure 230 x 280 x 111



Weidmuller - Klippon® POK - Polyester EnclosureThe Klippon® POK range is based on a high-quality glass fibre reinforced polyester enclosure which represents an economical solution for electrical connections. The enclosures are ideal wherever corrosion resistance, impact resistance and a high IP protection class are required.

Technical - Ex: • Enclosure material: Glass fibre-reinforced polyester to DIN 16913 with added graphite • Surface Colour: Black, similar to RAL 9011 • IP Rating: IP66 • Equipment mounting: M4 to M6 threaded bushes • Enclosure mounting: 4 holes for M4 to M6 screw • Impact Resistance: 7J • Gasket material: Silicone (VMQ) • Temperature range: -55 °C…+100 °C • Flammability: UL94 V0 • Certification: ATEX Certificate: KEMA 02ATEX2078 U (Empty Enclosure - Ex) ATEX Marking: II 2 GD Ex e II

Technical - Standard: • Enclosure material: Glass fibre-reinforced polyester to DIN 16913 • Surface Colour: Grey, similar to RAL7001 • IP Rating: IP66 • Equipment mounting: M4 to M6 threaded bushes • Enclosure mounting: 4 holes for M4 to M6 screws • Impact Resistance: 7J • Gasket material: Chloroprene • Temperature range: -40 °C…+90 °C • Flammability: UL94 V0

Features: • For use in hazardous area and industrial applications • 17 sizes and 2 versions • Stainless Steel lid screws • Fixing holes located outside the sealed area

• Threaded holes for mounting rails • Extremely robust and impact resistant due to the high amount of glass fibre • Approved to the latest international standards (e.g. ATEX, cULus, GOST)

Code - Ex Description Dims (L x W x D) (mm) 9510210000 POK 1 Enclosure 75 x 80 x 569510220000 POK 2 Enclosure 75 x 110 x 559510320000 POK 3 Enclosure 75 x 160 x 559510330000 POK31 Enclosure 75 x 190 x 559510340000 POK 32 Enclosure 75 x 230 x 559510230000 POK 4 Enclosure 120 x 122 x 919510240000 POK 5 Enclosure 120 x 220 x 919510250000 POK 51 Enclosure 160 x 160 x 909510260000 POK 6 Enclosure 160 x 260 x 909510270000 POK 7 Enclosure 160 x 360 x 909510350000 POK71 Enclosure 160 x 560 x 909510280000 POK 8 Enclosure 250 x 255 x 1209510290000 POK 9 Enclosure 250 x 400 x 1209510300000 POK 91 Enclosure 250 x 600 x 1209510310000 POK 10 Enclosure 405 x 400 x 1209510360000 POK 11 Enclosure 250 x 255 x 1609510370000 POK 12 Enclosure 250 x 400 x 160

Code - Standard Description Dims (L x W x D) (mm) 1277200000 POK 1 Enclosure 75 x 80 x 561277300000 POK 2 Enclosure 75 x 110 x 551277400000 POK 3 Enclosure 75 x 160 x 551565400000 POK31 Enclosure 75 x 190 x 559510510000 POK 32 Enclosure 75 x 230 x 551277500000 POK 4 Enclosure 120 x 122 x 911277600000 POK 5 Enclosure 120 x 220 x 911565410000 POK 51 Enclosure 160 x 160 x 901277700000 POK 6 Enclosure 160 x 260 x 901277800000 POK 7 Enclosure 160 x 360 x 909510520000 POK71 Enclosure 160 x 560 x 901565420000 POK 8 Enclosure 250 x 255 x 1201565430000 POK 9 Enclosure 250 x 400 x 1209510470000 POK 91 Enclosure 250 x 600 x 1201565440000 POK 10 Enclosure 405 x 400 x 1209510530000 POK 11 Enclosure 250 x 255 x 1609510540000 POK 12 Enclosure 250 x 400 x 160


Weidmuller - Klippon® STB - Stainless Steel (Sheet Steel) EnclosureIdeally suited for the energy and process industry and transportation. Enclosures in this series comply with international standards such as EN 62208 and EN 60079-0/7 (ATEX).

Code - Mirror-Polished Description Dimensions (L x W x D) (mm)1002690000 STB 1 Enclosure 120 x 120 x 801002750000 STB 1.1 Enclosure 150 x 120 x 801002740000 STB 2 Enclosure 150 x 150 x 901002730000 STB 2.1 Enclosure 190 x 150 x 901002720000 STB 3 Enclosure 190 x 190 x1001002710000 STB 4 Enclosure 250 x 250 x 1201002700000 STB 5 Enclosure 160 x 380 x 1201002760000 STB 6 Enclosure 250 x 400 x 130

Code - Elctro-Polished Description Dimensions (L x W x D) (mm)1058810000 STB 1 Enclosure 120 x 120 x 801058820000 STB 1.1 Enclosure 150 x 120 x 801058830000 STB 2 Enclosure 150 x 150 x 901058840000 STB 2.1 Enclosure 190 x 150 x 901058850000 STB 3 Enclosure 190 x 190 x1001058860000 STB 4 Enclosure 250 x 250 x 1201058880000 STB 5 Enclosure 160 x 380 x 1201058870000 STB 6 Enclosure 250 x 400 x 130

Technical (Stainless Steel Sheet Steel): • Enclosure material: Stainless steel 1.4404 (316L) 1.50 mm • Surface finish: Mirror-polished, electropolished • IP protection class: IP 66 • Earthing: Enclosure base part: internal E External M6 stainless steel Lid: M6 x 12 stainless steel • Installation mounting: Welded C-profile rail • Enclosure attachment: 2 external mounting feet with 8 mm holes • Lid opening: Completely removable lid with 4 x M5 screws • Impact resistance: 7J ATEX • Gasket material: Silicone -60 °C…+100 °C (120 °C on request) • Certification: (Empty Enclosure - S/S) - ATEX / IECEx certificate: IBExU 07ATEX1147 U / IECEx IBE09.0018U ATEX / IECEx marking: T II 2 G Ex e II C Gb, T II 2 D Ex tb IIIC Db IP66

Features: • Available in stainless steel or in steel sheet (please call for details) • Higher temperature resistant seals than the standard • Flexible options when mounting the internal rail • The gasket is protected against compression; this ensures that a permanent and secure seal is maintained • Earth studs in the lid and in the enclosure base • Mirror-polished or electropolished stainless steel 1.4404 (316L) or powder coated steel sheet 1.0330 • Fitted with a welded, internal C-profile rail (TAS 20) and mounting feet • Laser cut weld seams • Approved according to the latest international norms (e.g. ATEX, cULus, GOST)



Weidmuller - Klippon® TB MH - Multi Hinge EnclosureStainless steel enclosures for use in industrial and in explosive hazard areas. The Klippon® TB enclosure series features excellent performance characteristics, even under the most difficult environmental conditions, and also comply with the stricter requirements of explosive hazard areas found in the process or power generation industries.

Further sizes available and Quarter Lock (QL) range also available - please call for details

Code - 1 Code - 2 Code - 3 Code - 4 DimensionsGland Plate Gland Plates Gland Plates Gland Plates Description (L x W x D) (mm)1194560000 1194570000 1194580000 1194590000 TB10 Enclosure 229 x 152 x 1331194610000 1194620000 1194630000 1194640000 TB10A Enclosure 260 x 260 x 1501194660000 1194670000 1194680000 1194690000 TB10A Enclosure 260 x 260 x 2001194710000 1194720000 1194730000 1194740000 TB11 Enclosure 306 x 306 x 1501194760000 1194770000 1194780000 1194790000 TB11 Enclosure 306 x 306 x 2001194810000 1194820000 1194830000 1194840000 TB11A Enclosure 350 x 260 x 1501194860000 1194870000 1194880000 1194890000 TB11A Enclosure 350 x 260 x 200

Technical: • Certification (Empty Enclosure): ATEX certificate: KEMA 10ATEX0046 U, ATEX marking: II 2 G Ex e llC Gb, II 2 D Ex tb lllC Db IP66/67, IECEx certificate: IECEx KEM 10.0015U, IECEx marking: Ex e IIC Gb, Ex tb IIIC Db IP66/67 • Gland plates: 1 - 4 (fixed with M6 hexagon head screws with 10 mm heads), optionally without a gland plate • Gland plate thickness: 3 mm (other thickness of up to 20 mm are available on request) • Equipped for a padlock: Removable padlock fitting, for additional product security with an optional padlock (article number: 0905680000) • Earthing outside: Continuous M10 brass earth stud (optionally with stainless-steel earth stud) • Installation mounting: 4 or 6 mounting bolts with M6 threaded holes to attach the mounting plate or mounting rail • Enclosure attachment: 4 welded mounting feet with 11-mm holes (2 slotted and 2 cross-shaped openings) • Lid opening: Lid can be fully removed without the use of tools, can be fitted on both sides, lid opening angle: 130° • Earthing inside: Enclosure base and lid: welded M6 stainless steel earth studs • Cover attachment: 4 hinges and M6 hex-head screws(AF 10) with slot • Enclosure material: Stainless steel 1.4404 (316L) 1.5 mm • Surface finish: Electropolished • IP protection class: IP66 / IP67 • NEMA protection classes: 3, 4x, 12 • Impact resistance: 7 J ATEX applications, 10 J industrial applications • Gasket material: Silicone • Operating temperature range: -60 °C…+135 °C • Torque - lid and gland plate screws: 2.5 Nm

Features: • Available in 12 sizes and 3 standard depths • Equipped with up to 4 gland plates • The gasket is protected against compression • Completely removable padlock tab • Cover lock outside the sealed zone • Improved temperature performance • IP66/IP67 protection • Lid can be removed without a tool • Earth studs in enclosure cover and bottom section • Welded mounting feet • International approvals


JUNCTION BOXES - HAZARDOUS AREACEAG - GHG791….. Range of Ex Junction Boxes

Feel - Range 2000 Ex e Junction Boxes

Full range of mounting plates available - please call for details

Technical: • Marking to 94/9/EC: II 2 G Ex dem ia II, IIC / II 2 D Ex tD A21 IP66 T80 °C • EC-Type Examination Certificate: PTB 00 ATEX 3108 • IECEx certification of conformity: IECEx BKI 07.0034 • Marking accd. to IECEx: Ex e II T6 / Ex ia IIC T6 • Ex tD A21 IP66 T58 °C: • Permissible ambient temperature: –20 °C to +40 °C / –55 °C to +40 °C (option) • Rated voltage: 690 V / 550 V1) • Rated current depends on terminal cross section: • Connecting terminals: Max. 4 x 4 mm²/PE 4 x 2.5 mm² (multi-wire) Max. 2 x 6 mm²/PE 4 x 4 mm² (solid-wire) or 2 x 6 mm² + 1 x 2.5 mm² • Insulation class: I • Degree of protection: IP66 • Enclosure material: Polyamide

Technical: • Certificate No.: Sira 99ATEX3179 • Protection: EEx e IIC T6 T55°C, EEx e IIC T6 T65°C • Ambient Temerature: -60°C to +40°C (T6)*, -60°C to +55°C (T6)** • Power Dissipation Limit: 7.6* & 5.0** Watts @ T6 • Ingress Protection: IP66 • Material: Grey Cast Iron (EN 1561) Stainless Steel on request • Finish: Hot Dipped Galvanised, Zinc spray, Epoxy resin or Paint on request* = Dependant on Terminal Load

Features: • Robust junction box made of plastic and light alloy • Fitted with pillar terminals for cable of up to 6mm² • Practical orientated housing form allows for a problem-free access to the connection terminals for installation • Certified blanking plugs supplied with the junction box

• Wire and cable entries in the sizes M25 or M32 for Ø 8 – 17 mm or Ø 12 – 21 mm respectively • For cable with armouring there are junction boxes available with internal metal clamps or light alloy versions allowing for screw joints

Features: • Suitable for Zones 1 and Zone 2 (Gases) and Zones 21 and 22 (Dusts) • Explosion Protected • Weatherproof • Sira certified under directive 94/9/EC (ATEX) for Group II, Category 2, G and D • Product complies with standards EN 50014, EN 50019 and EN 50281-1-1

Code Description Dimensions (L x W x H) (mm) GHG 791 0101 R0019 Junction Box, 4 x Ex-e, 1 x PE Terminals, 4 x M20 Cable Gland 81.5 x 100 x 61GHG 791 0102 R0007 Junction Box, 6 x Ex-e, 2 x PE Terminals, 4 x M32 Cable Gland 117.5 x 113.5 x 73.5

Code - 20mm Code - 25mm Description2001 2051 1 Way - West Entry Position2002 2052 2 Way - West and East Entry Position2003 2053 3 Way - West, East and South Entry Position2004 2054 4 Way - West, East, South and North Entry Position2005 2055 Angle Box - West and South Entry PositionStandard entries are 20mm and 25mm ISO metric. 1.5mm pitch. Alternative entries are available upon request - Please call for details


Hawke - PL6 Series Exe Junction Boxes - Fully Populated

Technical: • Baseefa Certificate No. Baseefa06ATEX0117X • IECEx Certificate No. IECEx BAS 06.0028X • Construction and test standards IEC/EN 60079-0, IEC/EN 60079-7 and IEC/EN 61241-0 and IEC/EN 61241-1 • Ingress Protection: IP66 and IP67 to IEC/EN 60529 • Deluge protection: DTS01 • Operating temperature range: -60°C to +75°C

• Temperature class and ambient: T6 40°C • Materials and finishes: Glass reinforced polyester natural black finish • Flame Retardant to IEC 92.1 Clause 2.38

Features: • Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22 • The ultimate in robust GRP construction • Anti-static properties • Corrosion resistant stainless steel lid fixing screws with nylon retaining washers

• External mounting feet • Durable captive moulded silicone gasket • Stainless steel EXE rating label • Supplied complete with: steel earth continuity plate 1 x M20 offset tapped entry per face (entries not plugged)

Code Description Dims (W x H x D) (mm)PL612 Standard Fully Populated 120 x 120 x 74PL615 Standard Fully Populated 150 x 150 x 94PL626 Unpopulated 260 x 160 x 106

Feel - Range 9000 Ex E Junction Boxes

Technical: • Certificate No.: Sira 02ATEX3111 • Protection: EEx e II T6 T85OC / EEx e II T5 T100OC / EEx e II T3 T150OC • Ambient Temerature: -40OC to +50OC (T6) / -40OC to +55OC (T5) / -40OC to +130OC (T3)

• Power Dissipation Limit: 7.2W • Ingress Protection: IP66 • Material: Glass Reinforced Polyester, Fire Retardant • Finish: Matt Black

Features: • Suitable for Zones 1 and Zone 2 (Gases) and Zones 21 and 22 (Dusts) • Explosion Protected • Weatherproof • Sira certified under directive 94/9/EC (ATEX) for Group II, Category 2, G and D • Product complies with standards EN 50014, EN 50019 and EN 50281-1-1

Code - 20mm Code - 25mm Description9001 9051 1 Way - West Entry Position9002 9052 2 Way - West and East Entry Position9003 9053 3 Way - West, East and South Entry Position9004 9054 4 Way - West, East, South and North Entry Position9005 9055 Angle Box - West and South Entry PositionStandard entries are 20mm and 25mm ISO metric. 1.5mm pitch. Alternative entries are available upon request - Please call for details


Feel - Range 3000 Ex d Junction Boxes

Technical: • Certificate No.: Sira 00ATEX1124 • Protection: EEx d IIC T6 T55°C, EEx d IIC T5 T65°C • Ambient Temerature: -20°C to +40°C (T6), -20°C to +55°C (T5) • Power Dissipation Limit: 7.0 Watts @ T6, 5.0 Watts @ T5

• Ingress Protection: IP66 • Material: Grey Cast Iron (EN 1561) Stainless Steel on request • Finish: Hot Dipped Galvanised, Zinc spray, Epoxy resin or Paint on request

Features: • Suitable for Zones 1 and Zone 2 Hazardous Areas and Zones 21 and 22 • Explosion Protected • Weatherproof • Sira certified under directive 94/9/EC (ATEX) for Group II, Category 2, G and D • Product complies with standards EN 50014, EN 50018 and EN 50281-1-1

Code - Code - 20mm 25mm Description3001 3051 1 Way - West Entry Position3002 3052 2 Way - West and East Entry Position3003 3053 3 Way - West, East and South Entry Position

Code - Code - 20mm 25mm Description3004 3054 4 Way - West, East, South and North Entry Position3005 3055 Angle Box - West and South Entry Position

Standard entries are 20mm and 25mm ISO metric. 1.5mm pitch. Alternative entries are available upon request - Please call for details

JUNCTION BOXES - FULLY POPULATED HAZARDOUS AREA

FIXINGS

ANCHORS

NUTS, BOLTS & WASHERS

PLASTERBOARD & CAVITY FIXINGS

SCREWS

SITE CONSUMABLES

FIXINGS


ANCHORS

Anchor - Drop In

Anchor Setting Tool - Drop In

Anchor Bolts - Heavy Duty (Loose Bolts)

Anchor Bolts - Heavy Duty (Projecting Bolts)

Anchor Bolts - Heavy Duty (Shields)

Anchor - Ramnut (For Potted Ceilings/Blocks)

Code Size PackedNON06 M6 100NON08 M8 100NON10 M10 100NON12 M12 100

Code Size PackedNONST06 M6 100NONST08 M8 100NONST10 M10 100NONST12 M12 100

Code Size Drill Size (mm) PackedRAMLB0610 M6 x 10mm 10 1RAMLB0625 M6 x 25mm 10 1RAMLB0810 M8 x 10mm 14 1RAMLB0825 M8 x 25mm 14 1RAMLB1010 M10 x 10mm 16 1RAMLB1025 M10 x 25mm 16 1

Code Size Drill Size (mm) PackedRAMPB0610 M6 x 10mm 10 1RAMPB0625 M6 x 25mm 10 1RAMPB0815 M8 x 15mm 14 1RAMPB0840 M8 x 40mm 14 1RAMPB1010 M10 x 10mm 16 1RAMPB1025 M10 x 25mm 16 1

Code Size (mm) Drill Size (mm) PackedRAMSA06 6 10 1RAMSA08 8 14 1RAMSA10 10 16 1RAMSA12 12 20 1

Code Size PackedCAVRN08 M8 x 50mm 100CAVRN10 M10 x 50mm 100


Through Bolt - Zinc Plated

Chemical Anchor Resin

Code Size PackedTB06055 M6 x 55mm 1TB06085 M6 x 85mm 1TB08050 M8 x 50mm 1TB08090 M8 x 90mm 1TB10060 M10 x 60mm 1TB10075 M10 x 75mm 1TB10090 M10 x 90mm 1TB12070 M12 x 70mm 1TB12100 M12 x 100mm 1TB12140 M12 x 140mm 1

Code Description PackedCAPRG Grey Polyester Resin 1CAPRGUN Resin Dispensing Gun 1CAPRN Nozzles 1

NUTS, BOLTS & WASHERS

Bolts - H.T. Set Screws BZPCode Size PackedSETZ06012 M6 x 12mm 100SETZ06016 M6 x 16mm 100SETZ06020 M6 x 20mm 100SETZ06025 M6 x 25mm 100SETZ06030 M6 x 30mm 100SETZ06040 M6 x 40mm 100SETZ06050 M6 x 50mm 100SETZ08016 M8 x 16mm 100SETZ08020 M8 x 20mm 100SETZ08025 M8 x 25mm 100SETZ08030 M8 x 30mm 100SETZ08035 M8 x 35mm 100SETZ08040 M8 x 40mm 100SETZ08050 M8 x 50mm 100SETZ08060 M8 x 60mm 100SETZ08100 M8 x 100mm 100SETZ10020 M10 x 20mm 100SETZ10025 M10 x 25mm 100SETZ10030 M10 x 30 mm 100SETZ10035 M10 x 35mm 100SETZ10040 M10 x 40mm 100SETZ10050 M10 x 50mm 100SETZ10060 M10 x 60mm 100SETZ10070 M10 x 70mm 100

Code Size PackedSETZ10080 M10 x 80mm 100SETZ10100 M10 x 100mm 100SETZ12025 M12 x 25mm 100SETZ12030 M12 x 30mm 100SETZ12040 M12 x 40mm 100SETZ12050 M12 x 50mm 100SETZ12080 M12 x 80mm 100SETZ12100 M12 x 100mm 100

FIXINGS


Bolts & Nuts - XOX BZP

Nuts - Brass

Code Size PackedXOX12060 12 x 60mm 100XOX12065 12 x 65mm 100XOX12075 12 x 75mm 100XOX12110 12 x110mm 100XOX12130 12 x 130mm 100XOX12150 12 x 150mm 100XOX16060 16 x 60mm 100XOX16070 16 x 70mm 100XOX16080 16 x 80mm 100XOX16100 16 x 100mm 100XOX16130 16 x 130mm 100XOX16160 16 x 160mm 100

Code Size PackedNUTB035 M3.5 100NUTB04 M4 100NUTB06 M6 100NUTB08 M8 100NUTB10 M10 100

Nuts - BZPCode Size PackedNUTZ04 M4 100NUTZ05 M5 100NUTZ06 M6 100NUTZ08 M8 100NUTZ10 M10 100NUTZ12 M12 100NUTZ16 M16 100NUTZ20 M20 100

Nuts - Wedge Nuts Code Size PackedWNUT06 M6 100WNUT08 M8 100WNUT10 M10 100


Thread Converters - BZP

Set Bolts - Brass

Code Size Packed10M12F M10 Male M12 Female 10012M10F M12 Male M10 Female 100

Code Size PackedSETB0612 M6 x 12mm 100SETB0616 M6 x 16mm 100SETB0620 M6 x 20mm 100SETB0625 M6 x 25mm 100SETB0635 M6 x 35mm 100SETB0825 M8 x 25mm 100SETB0835 M8 x 35mm 100SETB0840 M8 x 40mm 100SETB1025 M10 x 25mm 100SETB1035 M10 x 35mm 100SETB1040 M10 x 40mm 100

Studding Connectors - BZP

Threaded Rod - BZP

Code Size PackedSTUDC06 M6 1STUDC08 M8 1STUDC10 M10 1STUDC12 M12 1

Code Size PackedSTUDZ306 M6 x 3M Length LTHSTUDZ308 M8 x 3M Length LTHSTUDZ310 M10 x 3M Length LTHSTUDZ312 M12 x 3M Length LTH

Nuts & Bolts - RoofingCode Size PackedROOF6012 M6 x 12mm 100ROOF6016 M6 x 16mm 100ROOF6020 M6 x 20mm 100ROOF6025 M6 x 25mm 100ROOF6030 M6 x 30mm 100ROOF6040 M6 x 40mm 100ROOF6050 M6 x 50mm 100ROOF6060 M6 x 60mm 100ROOF6080 M6 x 80mm 100ROOF6100 M6 x 0mm 100ROOF8025 M8 x 25mm 100ROOF8030 M8 x 30mm 100

FIXINGS


Washer - Brass Self Colour

Washer - Penny BZP

Washer - Internal Shakeproof BZP

Washer - Spring BZP

Code Size PackedWASB04 M4 100WASB06 M6 100WASB08 M8 100WASB10 M10 100WASB12 M12 100

Code Size PackedWASP0620 M6 x 20mm 100WASP0625 M6 x 25mm 100WASP0630 M6 x 30mm 100WASP0640 M6 x 40mm 100WASP0825 M8 x 25mm 100WASP0830 M8 x 30mm 100WASP1025 M10 x 25mm 100WASP1030 M10 x 30mm 100

Code Size PackedWASSH06 M6 100WASSH08 M8 100WASSH10 M10 100WASSH12 M12 100WASSH20 M20 100WASSH25 M25 100

Code Size PackedWASSP04 M4 100WASSP06 M6 100WASSP08 M8 100WASSP10 M10 100WASSP12 M12 100WASSP16 M16 100

Washer - Flat BZPCode Size PackedWASF04 M4 100WASF06 M6 100WASF08 M8 100WASF10 M10 100WASF12 M12 100


PLASTERBOARD & CAVITY FIXINGS

Cavity Screw Anchors

Cavity Fixings

Screw Anchor Fixing Tool

Code Size (mm) Hole Size (mm) PackedCAVSA432 3 - 11 8 100CAVSA438 10 - 16 8 100CAVSA537 8 - 13 8 100CAVSA552 3 - 16 10 100CAVSA565 19 - 32 10 100CAVSA637 8 - 13 10 100CAVSA652 3 - 16 13 100CAVSA665 19 - 32 13 100

Code Description PackedCAVRDM Redidrive Cavity Fixings 100CAVRDMR Metal Cavity Fixing 100

Code Description PackedCAVSATOOL HMZ2 Cavity Fixing Tool 1

Spring TogglesCode Size (mm) Hole Size (mm) PackedCAVTOG5 5 14 100CAVTOG6 6 14 100

Washer - Square Plate BZPCode Size PackedWASSQ1050 M10 x 50mm 100WASSQ1250 M12 x 50mm 100WASSQ1650 M16 x 50mm 100

FIXINGS


SCREWS

Machine Screw - Steel Zinc Plated Pan Head Slot

Machine Screw - Brass Pan Head Slot

Machine Screw - Brass Nickle Plated Raised Countersunk Slot

Code Size PackedMSZPS412 M4 x 12mm 100MSZPS416 M4 x 16mm 100MSZPS430 M4 x 30mm 100MSZPS512 M5 x 12mm 100MSZPS520 M5 x 20mm 100MSZPS525 M5 x 25mm 100MSZPS530 M5 x 30mm 100MSZPS540 M5 x 40mm 100MSZPS612 M6 x 12mm 100MSZPS620 M6 x 20mm 100MSZPS625 M6 x 25mm 100MSZPS630 M6 x 30mm 100MSZPS640 M6 x 40mm 100MSZPS650 M6 x 50mm 100

Code Size PackedMSBP406 M4 x 6mm 100MSBP410 M4 x 10mm 100MSBP412 M4 x 12mm 100MSBP416 M4 x 16mm 100MSBP420 M4 x 20mm 100MSBP425 M4 x 25mm 100MSBP440 M4 x 40mm 100MSBP450 M4 x 50mm 100

Code Size (mm) PackedMSBRA3512 3.5 x 12 100MSBRA3525 3.5 x 25 100MSBRA3530 3.5 x 30 100MSBRA3535 3.5 x 35 100MSBRA3540 3.5 x 40 100MSBRA3550 3.5 x 50 100MSBRA3560 3.5 x 60 100MSBRA3575 3.5 x 75 100

Self Drill Screw (8mm AF) TEK Hexagon HeadCode Size PackedSDSH04213 4.2 x 13 100SDSH08019 5.5 x 19 100SDSH08022 5.5 x 22 100SDSH08025 5.5 x 25 100SDSH08032 5.5 x 32 100SDSH08038 5.5 x 38 100SDSH08045 5.5 x 43 100SDSH08050 5.5 x 51 100SDSH08060 5.5 x 60 100SDSHSOC 8mm AF Magnetic Socket Bit 1SDSHSOC10 10mm AF Magnetic Socket Bit 1


Wood Screw - Brass Round Head Slot

Woodscrew - BZP Countersunk Pozi Twinthread

Self-Tapping Screw - BZP Pan Head Pozi

Code Size PackedWBRS06050 6 X ½” 100WBRS06100 6 X 1” 100WBRS08100 8 X 1” 100WBRS08150 8 X 1½” 100WBRS08200 8 X 2” 100WBRS10150 10 X 1 ½” 100

Code Size PackedWCP06075 6 x ¾” 100WCP06100 6 x 1” 100WCP06150 6 x 1½” 100WCP08075 8 x ¾” 100WCP08100 8 x 1” 100WCP08125 8 x 1¼” 100WCP08150 8 x 1½” 100WCP08175 8 x 1¾” 100WCP08200 8 x 2” 100WCP08250 8 x 2½” 100WCP08300 8 x 3” 100WCP10100 10 x 1” 100WCP10125 10 x 1¼” 100WCP10150 10 x 1½” 100WCP10200 10 x 2” 100WCP10250 10 x 2½” 100WCP10300 10 x 3” 100WCP10400 10 x 4” 100

Code Size PackedPKPP06037 6 x 3/8” 100PKPP06100 6 x 1” 100PKPP06125 6 x 1¼” 100PKPP06150 6 x 1½” 100PKPP08050 8 x ½” 100PKPP08100 8 x 1” 100PKPP08125 8 x 1¼” 100PKPP08150 8 x 1½” 100PKPP10075 10 x ¾” 100PKPP10100 10 x 1” 100PKPP10200 10 x 2” 100

Self Tapping Screw - BZP Pan Head Countersunk PoziCode Size PackedPKCP06050 6 x ½” 100PKCP06100 6 x 1” 100PKCP06150 6 x 1½” 100PKCP08050 8 x ½” 100PKCP08075 8 x ¾” 100PKCP08100 8 x 1” 100PKCP08150 8 x 1½” 100PKCP10075 10 x ¾” 100PKCP10100 10 x 1” 100PKCP10200 10 x 2” 100

FIXINGS


SITE CONSUMABLES

Auger Bits

Drill Bits - SDS Masonry

Drill Bits HSS - Metric

Code Size (mm) PackedAUG120 20 x 100 1AUG125 25 x 100 1AUG220 20 x 230 1AUG225 25 x 230 1AUG232 32 x 230 1

Code Size (mm) PackedDRIJL010 1.0 1DRIJL020 2.0 1DRIJL025 2.5 1DRIJL030 3.0 1DRIJL032 3.2 1DRIJL033 3.3 1DRIJL035 3.5 1DRIJL040 4.0 1DRIJL042 4.2 1DRIJL045 4.5 1DRIJL050 5.0 1DRIJL055 5.5 1DRIJL060 6.0 1DRIJL065 6.5 1DRIJL070 7.0 1DRIJL075 7.5 1DRIJL080 8.0 1DRIJL085 8.5 1DRIJL090 9.0 1DRIJL095 9.5 1

Code Size (mm) PackedDRIJL100 10.0 1DRIJL105 10.5 1DRIJL110 11.0 1DRIJL115 11.5 1DRIJL120 12.0 1DRIJL130 13.0 1

Code Size (mm) PackedSDS050160 5.0 x 160 1SDS055110 5.5 x 110 1SDS055160 5.5 x 160 1SDS060110 6.0 x 110 1SDS060160 6.0 x 160 1SDS065160 6.5 x 160 1SDS070110 7.0 x 110 1SDS070160 7.0 x 160 1SDS080160 8.0 x 160 1SDS10160 10 x 160 1SDS10210 10 x 210 1SDS10450 10 x 450 1SDS10600 10 x 600 1SDS101000 10 x 1000 1SDS11160 11 x 160 1SDS12160 12 x 160 1SDS12210 12 x 210 1SDS12450 12 x 450 1SDS12600 12 x 600 1SDS14150 14 x 150 1

Code Size (mm) PackedSDS15150 15 x 150 1SDS16150 16 x 150 1SDS16200 16 x 200 1SDS16450 16 x 450 1SDS18450 18 x 450 1SDS20200 20 x 200 1SDS20600 20 x 600 1SDS25250 25 x 250 1SDS25450 25 x 450 1SDS25600 25 x 600 1SDS26450 26 x 450 1

Large number of imperial sizes available - Please call for details


Flat BitsCode Size (mm) PackedFLAT16 16 1FLAT20 20 1FLAT25 25 1FLAT28 28 1FLAT32 32 1

Holesaws

Code Size (mm) PackedHTHS016 16 1HTHS020 20 1HTHS022 22 1HTHS025 25 1HTHS032 32 1HTHS040 40 1HTHS051 51 1HTHS064 64 1HTHS070 70 1HTHS076 76 1HTHS086 86 1HTHS102 102 1HTHS111 111 1HTHS114 114 1HTHS127 127 1HTHS152 152 1HTHS1629 Arbor Hex Shank 16 to 29mm 1HTHS3264 Arbor Hex Shank 32mm to 64mm 1HTHSA1 A1 Arbor Extension 1HTHSA2 A2 Arbor Extension 1HTHSME12 12” Extension Arbor 1HTHSPD 3” Arbor Pilot Drill Bit 1

Fibre Glass StepsCode DescriptionSTEPF4 Fibre Glass Steps 4 TreadSTEPF5 Fibre Glass Steps 5 TreadSTEPF6 Fibre Glass Steps 6 TreadSTEPF8 Fibre Glass Steps 8 Tread

FIXINGS

Sealants, Fillers & Adhesives

Tap Sets

Code Description PackedMASSANCR Clear Sanitary Silicone With Fungicide 1MASSANWE White Sanitary Silicone With Fungicide 1MASSGPCR Clear General Purpose Silicone 300ml 1MASSGPWE White General Purpose Silicone 300ml 1MASDC Decorators Caulk 400ml 1MASGUN Skeleton Gun Suitable For 310 & 400ml 1FRFOAM Fire Rated Expanding Foam 750ml 1FOGUN Gun For Expanding Foam 1

Code Description PackedTAPSET030 Hand Tap Set M3 (Taper, 2nd, Plug) 1TAPSET035 Hand Tap Set M3.5 (Taper, 2nd, Plug) 1TAPSET040 Hand Tap Set M4 (Taper, 2nd, Plug) 1TAPSET050 Hand Tap Set M5 (Taper, 2nd, Plug) 1TAPSET060 Hand Tap Set M6 (Taper, 2nd, Plug) 1TAPSET080 Hand Tap Set M8 (Taper, 2nd, Plug) 1TAPSET100 Hand Tap Set M10 (Taper, 2nd, Plug) 1TAPSET120 Hand Tap Set M12 (Taper, 2nd, Plug) 1

COME AND VISIT OUR TRADE COUNTERSR&M Stock a large range of Fixings Products, so come and visit one of our Trade Counters.

See back cover for contact details

PaintsCode Description PackedGALV400 Galvafroid Galv Coating 400ml 1GALV800 Galvafroid Galv Coating 800ml 1GALVSPRAY Galvspray 400ml 1


BULKHEADS - HAZARDOUS AREA ZONE 1


FLOODLIGHTS & ACCESSORIES - HAZARDOUS AREA ZONE 1


FLOODLIGHTS & ACCESSORIES - INDUSTRIAL

FLUORESCENT LUMINAIRES - INDUSTRIAL

FLUORESCENT LUMINAIRES - HAZARDOUS AREA ZONE 1


HIGH BAY LUMINAIRES - HAZARDOUS AREA ZONE 1

NAVIGATION LIGHTS

RECESSED FLUORESCENT - HAZARDOUS AREA ZONE 1

SITE LIGHTING 110V

WELL-GLASS LUMINAIRES-HAZARDOUS AREA ZONE 2

LIGHTING COLUMNS

LIGHTING

LIGHTING



Features: • Explosion protected light fitting for Incandescent as well as high pressure discharge lamps • Fitted with impact resistant and thermally stable dome-shaped glass • External screws are made of high quality stainless steel • Low weight - robust light alloy housing • Simple installation • Fulfils highest rquirements on corrosion protection and mechanical stability • Internal aluminium reflector enables well balanced light distribution • Enclosure colour - grey

Technical: • Certification: AB 05 Ex-e: EX II 2 G Ex de IIC T3/T2, Ex II2 D Ex tD A21 IP66 T125 °C AB 05 Ex-d: EX II 2 G Ex d IIB (+H2) T4/T3 • Degree of protection: IP66 to EN60529 • Operating temperature: -20°C to + 40°C -55°C to + 55°C Option available - call for details • Voltage: 250V (AB 05 Ex e), 230V (AB 05 Ex d)

Features: • Flameproof design enables the use of all types of incandescent lamps up to 100W or CFL lamps with suitable electronic ballast • Ceiling mount due to flat design • Suitable for use in the chemical industry • Certified for usage in environments with a temperature of up to +55 °C • Cast iron enclosure • External screws are made of high quality stainless steel • Simple installation • Enclosure colour - grey • Mechanical and chemical high resistent glass used for protective cover/bowl

Technical: • Certification: Ex II 2 G Ex d IIB T4(up to 100W)/T6 (11 W PL) dependant on lamp • Degree of protection: IP55 to EN60529 • Operating temperature: -20°C to + 55°C • Voltage: 250V

Code Lamp Wattage T Class (Gas) Ambient °CAB 05 Ex-e Incandescent 60W T3/T2 -20 to +55AB 05 Ex-d High Pressure Sodium 70W T4 -20 to +55

Code Lamp Wattage T Class (Gas) Ambient °CAB 80 Incandescent Lamp 60W or 100 W T4 -20 to +55

CEAG - AB 05 Bulkhead Light Fitting

CEAG - AB 80 Bulkhead Light Fitting


Features: • Installation to gas groups IIA and IIB • Ex e cable entries and looping as standard

• Internal reflector options • Low temperature applications to -55˚C

The Nevis bulkhead is designed for low profile applications. It can be mounted on walls, handrails and ceilings making it ideal for walkways or restricted height areas. The wide ambient temperature range makes the Nevis suitable for extreme environmental conditions. The Nevis has a side mounted increased safety terminal chamber. This eliminates the need for flameproof glands and allows for flush mounting with easy cable access.

Features: • L70 rated for >100,000 hours @ 25°C ambient • 5 year full performance warranty • Emergency battery backup versions available • Emergency exit sign kit and other sign options available • Plug and play - can be supplied complete with approved cable and plug • Supplied with flush bracket - angle and non bracket versions available

• Sandblasting cover protector available • Instant on/off operation • Mercury free, lead free • Resistant to shock and vibration • Additional LED colors available upon request: Green - for emergency shower lighting: Red - for emergency lighting • Recesed housing version approved for hazardous locations • Oval lense version available on request

Technical: • Type of Protection: Ex d e (Flameproof, Increased Safety) • ATEX Classification: Group II Category 2 GD • Area Classification: Zone 1 and Zone 21 areas to EN 60079-10-1 and EN 60079-10-2 with installation to - Certificate: EN 60079-14 Gas Groups IIA and IIB Coding: EC Type Examination Certificate Baseefa08ATEX0178 II Ex d e IIB • Enclosure: Aluminium alloy LM6 to BS 1490 (AC44100). All fastenings A4 stainless steel. Toughened glass dome cover • Ingress Protection: IP66/67 to EN 60529 • GOST R Approved

Technical: • Certification: 11W/22W - Ex d e mb IIC T6 Gb, Ex tb IIIC T85°C Db, IP66/67, II 2GD 34W - Ex d e mb IIC T5 Gb, Ex tb IIIC T100°C Db, IP66/67, II 2GD • Operating Voltage: 100-277V AC • Copper free LM6 alum cast housing • High impact resistant clear glass lens • 316 stainless steel mounting brackets • Temperature range -40° to + 60°C (dependant on version) • Impact Rating to EN 50102: IK09 • IP 66 rated • Emergency version has a 3 hr battery duration

Code Lamp Wattage T Class (Gas) T °C (Dust) Ambient °CNEVD/118/CF Compact Fluorescent 18W T5 80 -55 to +55NEVD/126/CF Compact Fluorescent 26W T5 80 -55 to +55NEVD/050/HS HPS 50W T4 125 -55 to +55NEVD/055/QL QL 55W T5 98 -55 to +55NEVD/070/MS HPS and Metal Halide 70W T4 125 -55 to +55NEVD/080/MV Mercury Vapour 80W T4 130 -20 to +55NEVD/125/MV Mercury Vapour 125W T3 140 -20 to +40NEVD/160/MB MBTF 160W T3 155 -55 to +40NEVD/200/GL GLS 200W T3 165 -55 to +55Other options available - please call for details

Code - Standard Lamp Wattage T Class (Gas) Ambient °CWPA-2C3C-FLGC Cool White LED 11W T5 -40 to +60WPA-2C3H-FLGC Cool White LED 22W T5 -40 to +60WPA-2C3L-FLGC Cool White LED 34W T5 -40 to +50

Code - Emergency Lamp Wattage T Class (Gas) Ambient °CWEA-2C4H-FLGC Cool White LED 24W T5 0 to +40WEA-2C4L-FLGC Cool White LED 36W T5 0 to +40

Chalmit - Nevis Bulkhead Ex d e Luminaire ATEX Category 2

Dialight - SafeSite® LED Bulkhead

LIGHTING


Chalmit - Nexxus Bulkhead

Chalmit - Nexxus II LED Bulkhead

Features: • Improved light output • Easy control gear replacement • Fixing points outside restricted breathing enclosure

• Suitable for low temperature applications• High corrosion resistance• Suitable for ceiling or wall mounting

Ex nA Luminaire ATEX Category 3

Features: • Fixing points outside restricted breathing enclosure • High corrosion resistance • Suitable for ceiling or wall mounting • Through wire or looping as standard • Prismatic lens

• Suitable for low temperature applications • Very low power consumption • Ultra long life, no relamping required • Suitable for Zone 21 combustable dust environments

Ex n Luminaire ATEX Category 3

Technical: • Type of Protection: Ex nR (Restricted Breathing) • ATEX Classification: Group II Category 3 G • Area Classification: Zone 2 areas to EN 60079-10-1 with installation to EN 60079-14 • Certificate: Type Examination Certificate BAS99ATEX3012 • Coding: II 3 GD Ex nR II • Enclosure: Painted LM6 (AC 44100) aluminium alloy body with prismatic glass lens, silicone rubber gasket and stainless steel fasteners • Reflector: High purity anodised aluminium • Ingress Protection: IP66/67 to EN 60529 • GOST Approved, CSA Compliant

Technical: • Type of Protection: Ex mc nA • ATEX Classification: Group II Category 3 GD • Area Classification: Zone 2 and Zone 22 area to EN 60079-10-1 and EN 60079-10-2 with installation to EN 60079-14 • Coding: II 3 GD Ex mc nA IIC T5 • Enclosure: Cast aluminium LM6 (AC 44100) with toughened glass and silicone gasket • Reflector: Brushed aluminium • Light Source: 12 x 1W light emitting diodes. Colour: white • Ingress Protection: IP66/67 to EN 60529 • ATEX IECEx Compliant

Code Lamp Lampholder Wattage T Class (Gas) Ambient °CNEXN/050/HS HPS E27 50W T4 -45 to +35NEXN/070/MS HPS/Metal Halide E27 80W T4 -45 to +35NEXN/080/MV Mercury Vapour E27 80W 150 °C T3 -20 to +25NEXN/160/MB MBTF E27 160W T3 -25 to +30NEXN/200/GL GLS E27 200W 150 °C T3 -45 to +30NEXN/113/CF Compact Fluorescent G24 13W T5 -20 to +50NEXN/118/CF Compact Fluorescent G24 18W T5 -20 to +50NEXN/126/CF Compact Fluorescent G24 26W T5 -20 to +50NEXN/213/CF Compact Fluorescent G24 2 x 13W T5 -20 to +30NEXN/218/CF Compact Fluorescent G24 2 x 18W T5 -20 to +30NEXN/226/CF Compact Fluorescent G24 2 x 26W T5 -20 to +30Other options available - please call for details

Code Lamp Wattage T Class (Gas) T °C (Dust) Ambient °CNE2N/121/LE LED 12W T4 100 -45 to +55Equivalent to 100W GLS lamp wattage output. Other options available - please call for details



CEAG - PX 04 … FloodlightFeatures: • High pressure discharge and halogen lamps can be used • Copper-free aluminium housing • Mechanical and thermal resistant borosilicate glass cover • All external screws are of stainless steel • Electrical components are thermically separated in their own compartment and have a separate Ex-e maintenance-friendly connection compartment • Narrow beam version available

Technical: • Certification: EX II 2 G Ex de IIC T4/T3 (dependant on lamp) EX II 2 D Ex tD A21 IP67 T (dependant on lamp) • Degree of protection: IP67 to EN60529 • Operating temperature: -20°C to + 55°C -55°C to + 55°C Option available - call for details • Voltage: 230V with control gear

Code Lamp Wattage T Class (Gas)PX 0425 High Pressure Sodium/Metal Halide 250W T3PX 0440S High Pressure Sodium 400W T3PX 0440H Metal Halide 400W T3PX 0460 High Pressure Sodium 600W T3


Chalmit - Evolution II Asymmetric Floodlight Ex nA Luminaire ATEX Category 2

The Evolution II is a hazardous area floodlight for use in Zone 1 and Zone 21 areas. It takes the unique features of the Evolution floodlight (excellent light output, low maintenance costs) and raises the bar to a new level of performance. The second generation Evolution uses an asymmetric reflector system to improve photometric output. This gives increased light distribution and provides the low glare attributes associated with this type of reflector.

As with the original Evolution there are no exposed flameproof paths. The only essential flameproof path at the lampholder spigot is contained within the increased safety control gear and terminal chamber located at the end of the main flameproof lamp enclosure. This is accessed by a single captive screw in the hinged cover.

Technical: • Type of Protection: Ex d e (Flameproof, Increased Safety) Dust protected enclosure • ATEX Classification: Group II Category 2 GD • Area Classification: Zone 1 and Zone 21 areas to EN 60079-10-1 and EN 60079-10-2 with installation to EN 60079-14 Gas Groups IIA and IIB • Certificate: EC Type Examination Certificate Baseefa04ATEX0155 • Enclosure is Aluminium alloy LM6 to BS 1490, all fastenings are A4 stainless steel with a toughened glass window • Ingress Protection: IP66/67 to EN60529 • Electrical Supply: 220, 230, 240, 254V 50Hz HPS & Metal Halide 24V - 254V Linear Tungsten-Halogen 110V - 254V Single ended Tungsten-Halogen

Code Lamp Lampholder Wattage T Class (Gas) T °C (Dust) Ambient °CEV2D/150/MS HPS and Metal Halide E40 150W T4 130 -20 to +40 T3 175 -20 to +55EV2D/250/MS HPS and Metal Halide E40 250W T4 130 -20 to +40 T3 175 -20 to +55EV2D/400/MS HPS and Metal Halide E40 400W T3 175 -20 to +55EV2D/600/HS* HPS E40 600W T3 195 -20 to +35EV2D/500/TH Single Ended T/Halogen E40 500W T3 195 -20 to +40EV2D/500/TL Linear T/Halogen R7s 500W T3 195 -20 to +55*Ignitor only fitted. Remote gear box required. Other options available - please call for details

LIGHTING


Technical: • Certifications: Ex II 2GD Ex d IIC T4 Gb (Ta = -20°C to +65°C) Ex II 2GD Ex d IIC T5 Gb (Ta = -20°C to +42°C) Ex t IIIC T135°C Db IP 6X (Ta = -20°C to +65°C) Ex t IIIC T100°C Db IP 6X (Ta = -20°C to +42°C) -40°C variants available for all the above • IP66/67 rated • Housing: Powder coated A360 aluminum

• Lens: Toughened glass • Operating Voltage: 110-277VAC, 50/60 Hz • Operating Temp: -20°C to +65°C (-20°F to +149°F) -40°C to +65°C also available

Dialight - SafeSite® Gen 2 LED Area Light

Glamox - FX60 Ex d LED Floodlight

Glamox - GFX Floodlight

Hazardous areas zone 1 and 2. The Ex de LED floodlights are designed for a long lifetime and high efficiency without any maintenance. The Ex d module of the floodlight has no flame phase and the connection box is Ex e approved.

Features: • Available in 1,2,3 and 4 module versions • Beam: Narrow, medium or wide beam options available • Each single module is made of seawater resistance aluminium and mounted by stainless steel frame and bracket • Low weight - less than 16 kg for the 4 module version

Features: • Ex d floodlight for high pressure sodium lamps or metal halide lamps • Die cast, seawater resistant aluminium housing • White RAL9016 powder coated painted finish • Two M25 entries

Technical: • Certification: Ex II 2G de IIB T3 (Halogen T2) Ex II 2D Ex td A21 IP6X T190ºC • Degree of protection: IP67 • Operating temperature: -30ºC to +45ºC • Voltage: 230V 50HZ

Features: • L70 rated for >100,000 hours @ 25°C ambient • 5 year full performance warranty • Instant on/off operation • Universal input (110-277 VAC), 50/60Hz • Superior colour rendition index compared to HPS, LPS, MV

• Mercury free • Resistant to shock and vibration • Temperature compensation technology for longer life • Factory sealed • Junction box version also available

Technical: • Ambient temperature: - 50° C up to + 55° C • Housing: Modules die-casting, seawater resistant aluminium; Frame and bracket stainless steel AISI 316 • Finish: Modules anodised • Pane: Safety glass dome • Termination: Ex e exterior connection box, terminal 6 mm²

• Cable entry: 2 cable glands M25 Ex e brass nickel plated (others on request) standard for cable 10 to 17 mm • Light sources: LED • Mounting: Adjustable bracket with 5 mounting holes, 14 mm • Ingress Protection: IP66 • The floodlights are ATEX (IECEx certificate pending)

Code Lamp Wattage TClass (Gas) Ambient °CHZA8C2N Cool White LED 180 ° Beam 70W T4 -20 to +65HZA9C2N Cool White LED 360 ° Beam 70W T4 -20 to +65

Code - 120V Code - 230V DescriptionFX60210000 FX60200000 T4, 2 Modules, Horizontal NBFX60211000 FX60201000 T4, 2 Modules, Horizontal MBFX60212000 FX60202000 T4, 2 Modules, Horizontal WBFX60310000 FX60300000 T4, 3 Modules, NBFX60311000 FX60301000 T4, 3 Modules, MB

Code - 120V Code - 230V DescriptionFX60312000 FX60302000 T4, 3 Modules, WBFX60410000 FX60400000 T4, 4 Modules, NBFX60411000 FX60401000 T4, 4 Modules, NBFX60412000 FX60402000 T4, 4 Modules, NB

Code Lamp Beam Wattage Ambient °CGFX250017W High Pressure Sodium Narrow 250W -30 to +45GFX250021W High Pressure Sodium Wide 250W -30 to +45GFX250019W Metal Halide Narrow 250W -30 to +45GFX250023W Metal Halide Wide 250W -30 to +45GFX400017W High Pressure Sodium Narrow 400W -30 to +45GFX400021W High Pressure Sodium Wide 400W -30 to +45GFX400019W Metal Halide Narrow 400W -30 to +45GFX400023W Metal Halide Wide 400W -30 to +45


Hadar Lighting - HDL106S LED Modular FloodlightEx d luminaireFeatures: • Modular construction allows the modules to be supplied interlinked with each other to provide greater light output • Each module utilises 48 of 12W LED’s • Integrated power supply • Low power consumption • Rugged construction – resistant to vibration • Independently photometrically tested • Optional wired guard available for extra protection • Wide, medium and narrow beam light output available • Low cost of installation, operation and maintenance • LED technology will give a predicted lamp life of 10 years+ • IP66 and IP67

Technical: • Main Body: Marine Grade Aluminium • Diffuser: Polycarbonate • Gaskets: Silicone • External Fasteners: A4 Stainless Steel • Stirrup Bracket: 316 Stainless Steel

• T Rating: T4 • Surface Temp: 103°C • Weight: 6.0kg per module • Certification: ATEX & IEC Ex and ABS certified. • Protection: II 2GD Ex emb IIC T4 Gb IP66/67, Ex t IIIC T103ºC Db

Code Lamp Beam Wattage T Class (Gas) Ambient °CHDL106S1HWHW005 48 x LED’s 110-254V Wide 1.2W T4 -20 to +50HDL106S1HMHW005 48 x LED’s 110-254V Medium 1.2W T4 -20 to +50HDL106S1HNHW005 48 x LED’s 110-254V Narrow 1.2W T4 -20 to +50HDL106S1LWHW005 48 x LED’s 24V Wide 1.2W T4 -20 to +50HDL106S1LMHW005 48 x LED’s 24V Medium 1.2W T4 -20 to +50HDL106S1LNHW005 48 x LED’s 24V Narrow 1.2W T4 -20 to +50Further options available (including Emergency) - please call for details

Code Lamp Wattage T Class (Gas) Ambient °CHDL117S2450150H MBI Metal Halide 150W T3 -20 to +40 HDL117S2450250H MBI Metal Halide 250W T3 -20 to +40 HDL117S2450400H MBI Metal Halide 400W T3 -20 to +40 HDL117S2450500T E40 Single End Tungsten Halogen 500W T2 -20 to +40

Hadar Lighting - HDL117 FloodlightFeatures: • 150W, 250W and 400W discharge lamps • 500W max tungsten halogen lamp • Simple installation • Straight forward maintenance • Integral control gear • Wide choice of voltage options

• Marine grade aluminium • Lightweight • Robust • Ex e junction box • Suitable for use with twin arc lamps • Wide beam reflector

Technical: • Main Body: Marine Grade Aluminium • Lamp Glass: Toughened Soda Lime • Certification: ATEX & IEC Ex Certified by SIRA

• External Fasteners: A4 Stainless Steel • T Rating: T2 and T3 • Protection: II 2G Ex de IIB T2/T3 IP56

LIGHTING



Chalmit - 800 Series Range of Floodlights

Chalmit - Maxinex Floodlight

The 800 series is a range of stainless steel asymmetrical floodlights, designed for optimum light output and efficiency to ensure the minimum number of luminaires is required.

The Maxinex is a lightweight asymmetric floodlight. Its compact design ensures low wind resistance so is ideal for high mast applications. The reflector design allows light to be thrown forward long distances whilst still lighting below the pole.

Technical: • Type of Protection: Ex nR (Restricted Breathing) • ATEX Classification: Group II Category 3 GD • Area Classification: Zone 2 areas to EN 60079-10-1 and EN 60079-10-2 with installation to EN 60079-14 • Certificate: Type Examination Certificate BAS98ATEX3378 • Coding: II 3 GD Ex nR II

• Enclosure marine grade 316S31 stainless steel body with toughened glass window, silicone rubber gasket • Reflector: Wide beam high purity anodised aluminium • Ingress Protection: IP66/67 to EN 60529 • Electrical Supply: 220, 230, 240, 254V 50Hz

Technical: • Type of Protection: Ex nR (Restricted Breathing) • ATEX Classification: Group II Category 3 G • Area Classification: Zone 2 and Zone 22 areas to EN 60079-10-1 and EN 60079-10-2 with installation to EN 60079-14 • Certificate: Type Examination Certificate BAS97ATEX4368 • Coding: II 3 GD Ex nR II

• Enclosure: Black epoxy painted aluminium body and frame with toughened glass window, silicone rubber gasket • Reflector: Wide beam high purity anodised aluminium • Ingress Protection: IP66/67 to EN 60529 • Electrical Supply: 220, 230, 240, 254V 50Hz

Features: • Photometrically superior asymmetric reflector • Marine grade stainless steel body and toughened glass cover • Quick release fasteners for ease of relamping and maintenance • Suspended cover front • Suitable for low temperature applications (-40°C) • Standard control gear for use with IEC lamps

Features: • Photometrically superior asymmetric reflector design • Low windage of 0.25m2 • High corrosion resistance • All stainless steel fasteners • Hinged front cover for easy access

• Choice of metal halide or high pressure sodium (HPS) lamps• Suitable for low temperature applications• Option available for Zone 22 combustable dust environments

Code Lamp Lampholder Wattage T Class (Gas) Ambient °C844N/070/MS HPS/Metal Halide E27 70W T3 -40 to +50 T4 -40 to +40854N/100/HS HPS E40 100W T4 -40 to +55854N/150/HS HPS E40 150W T3 -25 to +55 T4 -40 to +50854N/250/MS HPS/Metal Halide E40 250W T4 -25 to +40 854N/400/MS* HPS/Metal Halide E40 400W T3 -25 to +40854N/500/TH Single Ended E40 500W T3 -45 to +45 T/Halogen T2 -45 to +60864N/250/MS HPS/Metal Halide E40 250W T3 -25 to +55864N/400/MS HPS/Metal Halide E40 400W T3 -40 to +50 (HPS) - 25 to +40 (MH)* Ignitor only fitted within floodlight. Remote gear box required. Other options available - please call for details

Code Lamp Lampholder Wattage T Class (Gas) T °C (Dust) Ambient °CMAXN/150/MS HPS/Metal Halide E40 150W T4 130 -40 to +55MAXN/250/MS HPS/Metal Halide E40 250W T3 180 -40 to +55MAXN/400/MS HPS/Metal Halide E40 400W T3 200 -40 to +45 (HPS) T3 200 -40 to +30 (MH)


Hadar Lighting - HDL227 EEx nR FloodlightFeatures: • The HDL 227 marine grade aluminium alloy floodlight with high performance photometrics is designed to withstand highly corrosive and Zone 2 hazardous area environments • The EEx nR restricted breathing floodlight is constructed from a compact and lightweight design and is suitable for use with 150W, 250W and 400W high pressure sodium or metal halide lamps • High performance photometrics • Restricted breathing • SIRA certified • Lightweight design • High pressure sodium/metal halide

• Compact & Lightweight Design • Loop-In and Loop-Out as standard • Stirrup Bracket, Painted Steel • All external fasteners stainless steel • IP66

Technical: • Body: Painted Marine Grade Aluminium Alloy • Front: Hinged Front Cover • Diffuser: Toughened Glass 4mm • Reflector: Symmetrical Dimpled Anodised Polished Aluminium • Stirrup Bracket: Painted Steel • Protection: Ex II 3GD EEx nR IIT3/T2 IP65 • Certification: ATEX Certified by SIRA

Code Lamp Wattage T Class (Gas) Ambient °CHDL227S24500150E SON High Pressure Sodium (E40 Cap) 150W T3 -40 to +56HDL227S24500250E SON High Pressure Sodium 250W T3 -40 to +56HDL227S24500250H MBI Metal Halide 250W T3 -40 to +56HDL227S24500400E SON High Pressure Sodium 400W T2 -40 to +56HDL227S24500400H MBI Metal Halide 400W T2 -40 to +56

FLOODLIGHTS & ACCESSORIES - INDUSTRIALThorn - Sonpak LX15/25/40 Floodlight

Features: • Easy to install with drop down front glass and cable entry • Robust die-cast aluminium body

• Asymmetrical reflector • Toughened front glass • Sealed to IP65

Technical: • Designed and manufactured to comply with EN 60598 • Class I Electrical

• 960°C fire retardant • Ta Max. +25°C • IK06 IP65

A general purpose floodlight supplied with a 150, 250 or 400W high pressure sodium or metal halide lamp. Suitable for large area applications such as loading bays, town squares, precincts, parks or large building façades.

Code Lamp Lampholder WattageOTX150 High Pressure Sodium E40 150WOTXMH150 Metal Halide E40 150WOTX250 High Pressure Sodium E40 250WOTXMH250 Metal Halide E40 250WOTX400 High Pressure Sodium E40 400WOTXMH400 Metal Halide E40 400W

Accessories DescriptionOTX250L Louvre AttachmentOTX250V Visor AttachmentOTX250W Wire Guard

LIGHTING


Profession polycarbonate floodlight for General area lighting.

High efficiency compact floodlight incorporating either a 70 watt metal halide or high pressure sodium lamp. Designed and manufactured to comply with EN 60598 and are CE certified.

• Certified ingress protection to IP65 • Choice of metal halide or high pressure sodium lamp included • Highly durable UV stabilized impact resistant polycarbonate body • Improved resistance to salt water corrosion • High purity symmetric reflector for improved efficiency • Quality integral control gear for trouble free use • Wired with high temperature silicone insulated cable for maximum heat resistance • Easy maintenance with quick release toughened glass front cover

Code Description LampWFL70Q/POLY Floodlight 1 x 70W HQI-TWFL70S/POLY Floodlight 1 x 70W SON-T

To Order Features (Add suffix to order code) Example order code: WFL70S/POLY/PECCode Description/FTB: Fused terminal block/PEC: Dusk to dawn sensing photo-electric cell/TI: Timed ignitor to prevent lamp cycling/WG: Wire guard for improved protection/WH: White housing

Wirefield - Hamble Floodlight IP65

Thorn - Sonpak LX7Floodlight

Features: • Vandal resistant construction with high impact clear polycarbonate visor • Photocell versions available - OXTP70 & OXTPMH70

• Tough, polypropylene body • Asymmetrical reflector • Sealed to IP65

Technical: • Designed and manufactured to comply with EN 60598 • Class I Electrical

• 960°C fire retardant • Ta Max. +25°C • K08 IP65

A general purpose floodlight supplied with a 70W high pressure sodium or metal halide lamp. Suitable for small area applications such as yards, car parks, building façades, perimeters and gardens.

Code Lamp Lampholder WattageOTX70 High Pressure Sodium E27 70WOTXMH70 Metal Halide RX7s 70WOTXP70 High Pressure Sodium E27 70WOTXPMH70 Metal Halide RX7x 70W

Accessories DescriptionOTX70L Louvre AttachmentOTX70V Visor AttachmentOTX76S Spigot Attachment


High efficiency floodlight with UV stabilised impact resistant polycarbonate body incorporating metal halide, high pressure sodium, or mercury discharge lamp with power ratings ranging from 150 to 400 watts. Designed and manufactured to comply with EN 60598 and are CE certified.

• Certified ingress protection to IP65 • Choice of metal halide, high pressure sodium or mercury lamp included • Highly durable UV stabilised impact resistant polycarbonate body • Improved resistance to salt water corrosion • Quality integral control gear for trouble free use

• High purity symmetric reflector for improved efficiency, with an asymmetric reflector option • Wired with high temperature silicone insulated cable for maximum heat resistance • Easy maintenance with quick release toughened front glass

Code Description LampWFL250M/POLY Floodlight 1 x 250W MBFWFL400M/POLY Floodlight 1 x 400W MBFWFL250Q/POLY Floodlight 1 x 250W HQI-TWFL400Q/POLY Floodlight 1 x 400W HQI-TWFL150S/POLY Floodlight 1 x 150W SON-TWFL250S/POLY Floodlight 1 x 250W SON-TWFL400S/POLY Floodlight 1 x 400W SON-T

To Order Features (Add suffix to order code) Example order code: WFL400Q/POLY/TI/PEC

Code Description/AS Asymmetric reflector (sodium and metal halide only)/FTB Fused terminal block/PEC Dusk to dawn sensing photo-electric cell/TI Timed ignitor to prevent lamp cycling/TPS Power switching/WG White housing/WH Wire guard for improved protection

Wirefield - Roma Floodlight IP65

High efficiency floodlight incorporating metal halide, high pressure sodium, or mercury discharge lamp with power ratings ranging from 150 to 400 watts. Designed and manufactured to comply with EN 60598 and are CE certified.

• Certified ingress protection to IP65 • Choice of metal halide, high pressure sodium or mercury lamp included • Highly durable die cast aluminium body • Epoxy powder coated for corrosion resistance

• High purity symmetric reflector for improved efficiency • Quality integral control gear for trouble free use • Wired with high temperature silicone insulated cable for maximum heat resistance • Hinged drop down front panel for ease of maintenance

Code Description LampWFL150Q Floodlight HQI-T 1 x 150WWFL150S Floodlight SON-T 1 x 150WWFL250M Floodlight MBF 1 x 250WWFL250Q Floodlight HQI-T 1 x 250WWFL250S Floodlight SON-T 1 x 250WWFL400M Floodlight MBF 1 x 400WWFL400Q Floodlight HQI-T 1 x 400WWFL400S Floodlight SON-T 1 x 400W

To Order Features (Add suffix to order code) Example order code: WFL400Q/TI/PEC Code Description/AGL Anti-Glare Louvre for precise illumination/AGV Anti-Glare Visor for an improved angle of cut off/FTB Fused terminal block/PEC Dusk to dawn sensing photo-electric cell/TI Timed ignitor to prevent lamp cycling/WG Wire Guard for improved protection

Wirefield - Solent Floodlight IP65

LIGHTING


High efficiency compact floodlight incorporating either 70 or 150 watt metal halide or high pressure sodium lamps. Designed and manufactured to comply with EN 60598 and is CE certified.

• Certified ingress protection to IP65 • Choice of metal halide or high pressure sodium lamp included • Highly durable die cast aluminium body • Epoxy powder coated black for corrosion resistance • High purity symmetric reflector for improved efficiency

• Quality integral control gear for trouble free use • Wired with high temperature silicone insulated cable for maximum heat resistance • Hinged drop down front panel for ease of maintenance

Code Description LampTMP70Q Floodlight 1 x 70W HQI-TTMP150Q Floodlight 1 x 150W HQI-TTMP150Q/LV 110V Floodlight 1 x 150W HQI-TTMP70S Floodlight 1 x 70W SON-TTMP70S/LV 110V Floodlight 1 x 70W SON-T

To Order Features (Add suffix to order code) Example order code: TMP70S/PEC Code Description/FTB Fused terminal block/PEC Dusk to dawn sensing photo-electric cell (not available on TMP70S/LV)/TI Timed ignitor to prevent lamp cycling (240v product only)/WG Wire guard for improved protection

Wirefield - Solent 1 Floodlight IP65

FLUORESCENT LUMINAIRES - INDUSTRIAL

Chalmit - Protecta Surface Mounted Fluorescent Luminaire The Protecta is a proven and reliable T8 fluorescent luminaire. The Protecta’s rugged, corrosion resistant construction (IP66/IP67) combined with an advanced high frequency ballast ensures minimum product maintenance is required.

Technical: • Ingress Protection: IP66/67 to EN60529 • Enclosure: GRP body with clear polycarbonate diffuser and brass suspension points • Reflector/Gear-tray: White polyester painted zinc coated steel • Control Gear: High Frequency electronic control gear • Electrical Supply: 110-254V 50/60Hz

Code - High Frequency Code - Emergency Lamp Lamp Holder Wattage Length (mm)PRGI/118/BI/HF PRGI/118/BI/EM T8 G13 1 x 18W 742PRGI/218/BI/HF PRGI/218/BI/EM T8 G13 2 x 18W 742PRGI/136/BI/HF PRGI/136/BI/EM T8 G13 1 x 36W 1352PRGI/236/BI/HF PRGI/236/BI/EM T8 G13 2 x 36W 1352Other options available - please call for details

Features: • Simple rugged construction • Full length easy access diffuser clamp • Hinged cover • Standard fixing centres • When fitted high frequency control gear gives 50/60Hz operation, high power factor correction and regulation of lamp output • Quick release mains terminals • DTS-01 deluge tested • Vibration tested to comply with Lloyds/DNV • A copper and iron version is also available. To order substitute /HF with /ES and specify the voltage


Glamox - MIRS67 Fluorescent Luminaire

Thorn - Aquaforce II Weatherproof Fluorescent

These outdoor lighting fixtures are applicable for a wide range of different areas, e.g. workshops, engine rooms, stores, passage ways etc. and are designed to meet maritime requirements.

Features: • High frequency ballast • Body - Stainless steel AISI 316L white, polycarbonate diffuser • Through Wired • 4 x M20 Entries • Emergency duration 3 hours one lamp operation

A highly durable, IP65 rated, luminaire for use in wet and dusty areas, where reliability is important.

Features: • Deep gasket channel for an assured IP65 seal • Suspendable gear tray for easy maintenance • Connect, ready to install versions • C/w Polycarbonate Diffuser • Injection moulded body and diffuser

Technical: • Degree of Protection: IP67 • Operating Temperature: -25°C - +40°C • Operating Voltage: 230/240V 50/60Hz

Code - Standard Product Name Lamp Wattage Length (mm) Ambient °CPA051028008 MIRS67 218HF TW PC M20 (2B/2B) T8 2 x 18W 724 -25 to +40PA050615001 MIRS67 236HF TW PC M20 (2B/2B) T8 2 x 36W 1334 -25 to +40

Code - Emergency Product Name Lamp Wattage Length (mm) Ambient °CPA120328001 MIRS 218HF-E3/S TW PC M20 (1B/2B) T8 2 x 18W 858 -25 to +40PA120328002 MIRS 236HF-E3/S TW PC M20 (1B/2B) T8 2 x 36W 1468 -25 to +40

Switch Start High Frequency High Frequency Emergency Lamp Wattage Length (mm)AQLUS136 AQLUZ136 AQE3LUZ136 T8 1 x 36W 1200AQLUS156 AQLUZ158 AQE3LUZ158 T8 1 x 58W 1500AQLUS170 AQLUZ170 AQE3LUZ170 T8 1 x 70W 1800AQLUS236 AQLUZ236 AQE3LUZ236 T8 2 x 36W 1200AQLUS256 AQLUZ258 AQE3LUZ258 T8 2 x 58W 1500AQLUS270 AQLUZ270 AQE3LUZ270 T8 2 x 70W 1800

R&M LIGHTING SYSTEMS AND PRODUCTS R&M are now able to produce professional lighting designs and schematics for all of our customers.

For more information please contact our Lighting Division [email protected]

LIGHTING


Technical: • Materials of Fixture: Fiberglass reinforced polyester housing Polycarbonate lens Elastomer gasket Highly reflective white polycarbonate internal reflector • Conforming to ATEX 94/9/CE CE 0081 II 2 G CE 0081 II2 D • T Rating: T5(1) to T4 • Ambient Temperature: -40°C to +55°C • Certification: CE Declaration of Conformity 50201 ATEX Certificate LCIE 07 ATEX 6017 IECEx Certificate IECEx LCI 04.0017 Other Certifications GOST, Marine Listed UL 1598A • Ingress Protection: IP66/67 • Impact Resistance (shock): IK10

Features: • Corrosion-resistant fiberglass reinforced polyester body and hinged polycarbonate lens • High impact resistance housing (20 Joules – IK10) from -40°C to +55°C ambient temperature and wind profile for use in extreme offshore and onshore environments • Latch assembly and elastomer gasket seals against water and dust ingress, IP66/67 • Easily accessed for maintenance using Allen key or straight blade screwdriver • Central opening with unique patented release system to prevent damage • Hinged parabolic reflector for high lumen output efficiency • Vibration resistant spring loaded lampholders for bi-pin (G13) or mono-pin (Fa6) versions • Positive safety switch disconnects power to lamps and ballast to allow maintenance in hazardous locations • Electronic multi-tap ballast 110 to 254 Vac/Vdc +/- 10% 50/60 Hz, for global applications. High power factor electronic ballast (>0.95). EOL (End Of Life) protection in accordance to the latest EN/IEC 60079-7 standard • Two channel ballast prevents dark areas by allowing one lamp to remain lit if one fails • Ballast plug-in with Ex e connector for quick and error-free maintenance • Available in 3 hours emergency version, including multi-tap ballast with built-in monthly self test. Test results through multi-colored LED • Ex e battery with plug-in

Can be installed in hazardous areas designated as Zone 1, 2, 21 and 22. For use in locations where a high degree of corrosion resistance is required. For indoor/outdoor use where protection against dirt, water and moisture is necessary. Typical applications include oil refineries, petrochemical facilities, pulp and paper mills, food processing plants, warehouses, underground tunnels and general manufacturing facilities.

Code - (Armoured) Std Lamp Lamp Holder Wattage Voltage Length (mm)FEB118BUSA T8 Bi-pin (G13) 1 x 18W 110/254 785FEB218BUSA T8 Bi-pin (G13) 2 x 18W 110/254 785FEB136BUSA T8 Bi-pin (G13) 1 x 36W 110/254 1390FEB236BUSA T8 Bi-pin (G13) 2 x 36W 110/254 1390FEB158BUSA T8 Bi-pin (G13) 1 x 58W 110/254 1690FEB258BUSA T8 Bi-pin (G13) 2 x 58W 110/254 1690

Code - (Armoured) Emergency Lamp Lamp Holder Wattage Voltage Length (mm)FEB218BUSAE T8 Bi-pin (G13) 2 X 18W 110/254 785FEB236BUSAE T8 Bi-pin (G13) 2 x 36W 110/254 1390FEB258BUSAE T8 Bi-pin (G13) 2 x 58W 110/254 1690

ATX - FE™ Series Fluorescent Luminaires



Technical: • Material of Fixtures: Fiberglass reinforced polyester housing Polycarbonate lens Elastomer gasket Highly reflective white polycarbonate internal reflector • Conforming to CE II 3 G CE II 2 D • Symbol of Protection ATEX or IEC Ex nR II or Ex nA II Ex tD A21 • T Rating: T6 to T4 • Ambient Temperature: -40°C To +55°C • Surface Temperature, Dust: T75°C • Ingress Protection: IP66/67 • Impact Resistance (shock): IK10 • Certification: CE Declaration of Conformity 50212/50225 ATEX Certificate LCIE 03 ATEX 6072/6166 IECEx Certificate IECEx LCI 04.0021 Other Certifications GOST, Marine listed UL 1598A • Standards: Ex standards EN / IEC 60079-15; 61241-0; 61241-1 Product standards EN / IEC 60598-1; 60598-2-22 EMC standards EN / IEC 55015; 61547 Other standards EN / IEC 60529 (IP); 62262 (IK)

Features: • Corrosion-resistant fiberglass reinforced polyester bodyand hinged polycarbonate lens • High impact resistance housing (20 Joules - IK10) from-40°C to +55°C ambient temperature and wind profile for use in extreme offshore and onshore environments • Latch assembly and elastomer gasket seals against water and dust ingress, IP66/67 • Easily accessed for maintenance using Allen key or straigh tblade screw driver • Central opening with unique patented release system to prevent damage • Hinged parabolic reflector for high lumen out put efficiency • Vibration resistant spring loaded lampholders for Bi-pin(G13) or mono-pin (Fa6) versions • Also available with electronic ballast 220/240 Vac/Vdc +/- 10%50/60 Hz. High power factor electronic ballast (>095) EOL • Available in 3 hours emergency version, including multi-tap ballast with built-in monthly self test. Test results through multi-color LED • Electronic multi-tap ballast 110 to 254 Vac/Vdc +/- 10% 50/60 Hz, for global applications. High power factor electronic ballast (>095) EOL (End Of Life) protection in accordance to the latest EN/IEC 60079-7 standard

Can be installed in hazardous areas designated as Zone 2, 21 and 22. For use in locations where a high degree of corrosion resistance is required. For indoor/outdoor use where protection against dirt, water and moisture is necessary. Typical applications include oil refineries, petrochemical facilities, pulp and paper mills, food processing plants, warehouses, underground tunnels and general manufacturing facilities.

Code - (Armoured) Std Lamp Lamp Holder Wattage Voltage Length (mm)FNB218BKSAN T8 G13 2 x 18W 220/240 785FNB218BUSAN T8 G13 2 x 18W 110/254 785FNB236BKSAN T8 G13 2 x 36W 220/240 1390FNB236BUSAN T8 G13 2 x 36W 110/254 1390FNB258BKSAN T8 G13 2 x 58W 220/240 1690FNB258BUSAN T8 G13 2 x 58W 110/254 1690

Code - (Armoured) Emergency Lamp Lamp Holder Wattage Voltage Length (mm)FNB218BUSAEN T8 G13 2 x 18W 110/254 785FNB236BUSAEN T8 G13 2 x 36W 110/254 1390FNB258BUSAEN T8 G13 2 x 58W 110/254 1690

ATX - FN™ Series Fluorescent Luminaires

LIGHTING


Features: • Glass reinforced polyester body with polycarbonate diffuser • Electronic HF control gear with independent lamp operation • End of Life (EOL) conformity • Automatic isolation upon opening, via hexagon SW13 tool • Multiple locking points on diffuser, can be hinged from both sides • 6mm terminals for live, neutral & earth, through wired • Standard dual channel ballast

• Safety locking system due to an integrated forced isolating switch • Connection to CEAG emergency light monitoring systems possible

Features: • Glass reinforced polyester body with polycarbonate diffuser • Automatic 5 minute weekly and 35 minute quarterly function test • Microprocessor monitors charging & discharging of the battery • Five green LED’s indicate the battery status and capacity • Maintained, non-maintained or switchable • Selectable emergency duration either 1.5 or 3hrs • Remote/Black start function available as standard • 110 - 127V AC versions are also available

• Two channel EVG with EOL monitoring as standard • Fault indication by flashing red LED with reset after fault elimination • Easy replacement of battery, even in Ex-areas • International approvals

Code Lamp Lampholder Wattage Length (mm) T Class (Gas) Ambient °CeLLK 92018/18 T8 Bi-Pin 2 x 18W 760 T4 -25 to + 50eLLK 92036 T8 Bi-Pin 1 x 36W 1360 T4 -25 to + 50eLLK 92036/36 T8 Bi-Pin 2 x 36W 1360 T4 -25 to + 50eLLK 92058/58 T8 Bi-Pin 2 x 58W 1660 T4 -25 to + 40

Code Lamp Lampholder Wattage Length (mm) T Class (Gas) Ambient °CeLLK92018/18NIB T8 Bi-Pin 2 x 18W 900 T4 -20 to + 50eLLK92036/36NIB T8 Bi-Pin 2 x 36W 1500 T4 -20 to + 50

CEAG - eLLK 92… Fluorescent Fittings

CEAG - eLLK 92 ….NIB Emergency Fluorescent Fittings

Technical: • Certification: Ex II 2 G Ex de IIC T4 Ex II 2 tD A21 IP66 T80° C • Degree of protection: IP66 • Operating temperature: -25°C to + 50°C • Voltage: 110 - 254VAC, 195 - 250VDC 50/60Hz • Through wired • Two M25 entries both ends with M20 thread convertors

Technical: • Certification: Ex II 2 G Ex de mb ib IIC T4 Ex II 2 tD A21 IP66 T80° C • Degree of protection: IP66 • Operating temperature: -20°C to + 50°C • Voltage: 220 - 254VAC, (110-127VAC optional) • Emergency duration 3 hours • Through wired • Two M25 entries both ends with M20 thread convertors


Chalmit - Protecta III Fluorescent LuminaireEx e Fluorescent ATEX Category 2. The Protecta III is a proven and reliable T8 fluorescent luminaire. The Protecta’s rugged, corrosion resistant construction (IP66/IP67) combined with an advanced high frequency ballast ensure minimum product maintenance is required.

Technical: • Type of Protection: Ex e mb q (Increased safety Encapsulation Powder filling) • ATEX Classification: Group II Category 2 GD • Area Classification: Zone 1 and 21 areas to EN 60079-10-1 and EN 60079-10-2 with installation to EN 60079-14 • Certificate: EC Type Examination Certificate Baseefa04ATEX0220 • Coding: II 2 GD Ex e mb q IIC T4 Tamb 55°C • Enclosure: GRP body with polycarbonate cover and brass suspension points • Control Gear: High Frequency • Ingress Protection: IP66/67 to EN 60529 • Electrical Supply: 220V - 254V 50/60Hz, 220 - 300V dc

Code - Standard Code - Emergency Lamp Wattage Length (mm) T Class (Gas) T °C (Dust) Ambient °CPRGE/218/BI PRGE/218/BI/EM T8 2 x18W 742 T4 85 -20 to +55PRGE/236/BI PRGE/236/BI/EM T8 2 x 36W 1352 T4 85 -20 to +55PRGE/218/MO PRGE/218/MO/EM T8 2 x 18W 742 T4 85 -20 to +55PRGE/236/MO PRGE/236/MO/EM T8 2 x 36W 1352 T4 85 -20 to +55Other options available - please call for details MO - Mono-pin (fa6 Cap) Lamps

Features: • Simple rugged construction • Full length easy access diffuser clamp • Advanced control gear gives 50/60Hz operation, high power correction factor and regulated lamp output that is 20% greater at -20°C than competitors • Resistant to voltage fluctuations • DC operation

• Automatic lamp de-energisation on opening • Quick release mains terminals • DTS-01 deluge tested • Vibration tested to comply with Lloyds/DNV • End of life (EOL) protection to IEC 60079-7 (with EOL I and EOL II functionality)

Glamox - MAXS67 Fluorescent LuminaireA high quality long life luminaire. Suitable for areas where there is a danger of explosion, Ex e for zone 1 and 2, for industrial applications, on ships and oil installations.

Features: • Stainless steel body with white stove-enamelled epoxy powder finish • High impact polycarbonate diffuser • Through wired • Two M20 entries both ends • Emergency version duration 3 hours

Technical: • EX Classification: EXE-T4 • EX dust classification: Ex-tD T81 • Degree of protection: IP66/67

• Operating temperature: -30ºC to +50ºC • Voltage: 220-25V 50/60HZ

Code - Standard Product Name Lamp Wattage Length (mm) Ambient °CPA030902002 MAXS67 218 TW PC B20 T8 2 x 18W 724 -30 to +50MAX019257 MAXS67 236 TW PC B20 T8 2 x 36W 1334 -30 to +50

Code - Emergency Product Name Lamp Wattage Length (mm) Ambient °CPA080102002 MAXS67 218 TW PC B20 3Hr Emergency T8 2 x 18W 724 -30 to +50MAX018038 MAXS67 236 TW PC B20 3Hr Emergency T8 2 x 36W 1334 -30 to +50

LIGHTING


Hadar Lighting - HDL100 Fluorescent LuminaireEx emb Fluorescent LuminaireFeatures: • Simple Installation • Straightforward maintenance • Emergency version available - 3 hour duration • Rugged construction • Easily relamped with detachable lamp envelope • Mains isolation not required when relamping • Features a reflector compatible with Unistrut or equivalent channel support systems and accessories

• Short gaskets for proven ingress protection • Mounting in any attitude • Pole mounting version available • Continuous monitoring of fluorescent lamps ensures safe end of life shutdown by electronic ballast in accordance with HSE safety notice 8/05 • Overvoltage protection 320V for 1 minute • Electronic control gear for instant operation at lower temperatures

Technical: • Polycarbonate enclosure and lamp envelope • Aluminium powder coated reflector • Silicone gaskets • A4 Stainless steel external fasteners • T4 T Rating • 100°C Surface temp • Protection: II 2GD Ex emb II T4/T5 IP66/67, Ex tD A21 T100°C • Certification: ATEX & IEC Ex certified by SIRA; ABS approved for marine use

Code Lamp Lampholder Wattage Length (mm) T Class (Gas) Ambient °CHDL100SLH0218 Standard Fluorescent Bi-Pin 2 x 18W 970 T4 -30 to +55 HDL100SLH0236 Standard Fluorescent Bi-Pin 2 x 36W 1580 T4 -30 to +55 HDL100SLH0258 Standard Fluorescent Bi-Pin 2 x 58W 1880 T4 -30 to +53 HDL100ELH0218 Emergency Fluorescent Bi-Pin 2 x 18W 970 T4 -15 to +55 HDL100ELH0236 Emergency Fluorescent Bi-Pin 2 x 36W 1580 T4 -15 to +55 HDL100ELH0258 Emergency Fluorescent Bi-Pin 2 x 58W 1880 T4 -15 to +53Other options available - please call for details


Light duty luminaire ideal for commercial and light industrial locations including hazardous areas designated as Zone 2 or 22 environments. Typical applications include oil refineries petrochemical plants, pulp and paper mills, tunnels and other light duty manufacturing locations. Non metallic.Features: • Utilises two 26 mm (T8) bi-pin fluorescent lamps • Fiberglass reinforced polyester housing • Instant start 95% power factor ballast • Pre-impregnated fiberglass reinforced white polyester housing • Closing system using stainless steel clips • Electrostatically applied white powder painted steel reflector provides optimal lighting distribution • Poured-in-place elastomer gasket

• Available in 3 hours emergency version, including multi-tap ballast with built-in monthly self test. Test results through multi-colored LED• Plug-in battery pack is easy to remove for maintenance.• Battery voltage is 6 volts and 4 Ah capacity.• One fluorescent tube remains lit for up to 3 hours and up to 29% light intensity for 18 watt, 15% for 36 watt and 9% for 58 watt.• All emergency units supplied with cut off switch to battery when fixture is opened

Code - Standard Lamp Lampholder Wattage VoltageFLB118BKSA T8 Bi-Pin (G13) 1 x 18W 220/240FLB218BKSA T8 Bi-Pin (G13) 2 x 18W 220/240FLB218BUSA T8 Bi-Pin (G13) 2 x 18W 110/254FLB136BKSA T8 Bi-Pin (G13) 1 x 36W 220/240FLB136BUSA T8 Bi-Pin (G13) 1 x 36W 110/254FLB236BKSA T8 Bi-Pin (G13) 2 x 36W 220/240

Code - Emergency Lamp Lampholder Wattage VoltageFLB218BUSAE T8 Bi-Pin (G13) 2 x 18W 110/254

Code - Standard Lamp Lampholder Wattage VoltageFLB236BUSA T8 Bi-Pin (G13) 2 x 36W 110/254FLB158BKSA T8 Bi-Pin (G13) 1 x 58W 220/240FLB158BUSA T8 Bi-Pin (G13) 1 x 58W 110/254FLB258BKSA T8 Bi-Pin (G13) 2 x 58W 220/240FLB258BUSA T8 Bi-Pin (G13) 2 x 58W 110/254

Code - Emergency Lamp Lampholder Wattage VoltageFLB236BUSAE T8 Bi-Pin (G13) 2 x 36W 110/254FLB258BUSAE T8 Bi-Pin (G13) 2 x 58W 110/254

ATX - FL™ Series Fluorescent Luminaires

Technical: • Conforming to ATEX 94/9/CE • T Rating: T4 for nA protection mode • Ambient Temperature: -20°C to +55°C • ATEX Certificate: LCIE 08ATEX6005X / LCIE 08ATEX6063X • IEC Certificate: LCIE Ex 08.007X / LCIE Ex 08.008X • Ingress Protection: IP65 / 67


Features: • Glass reinforced polyester body with polycarbonate diffuser • Green indication LED for charging current and fault indication • Maintained or non-maintained mode • Selectable emergency duration either 1.5 or 3hrs • With electronic ballast incl. EOL set-up • Easy replacement of battery, even in Ex-area • International approvals • Self-contained NC-battery for emergency lighting 1.5 h, alt. 3.0h

Code Lamp Lampholder Wattage Length (mm) T Class (Gas) Ambient °CnLLK 08018/18 N T26 Bi-Pin 2 x 18W 760 T4 -25 to + 45nLLK 08036/36 N T26 Bi-Pin 2 x 36W 1360 T4 -25 to + 45

CEAG - nLLK 08 …N Emergency Fluorescent Fittings

Technical: • Certification: Ex II 3 G Ex nA de/de mb IIC T4 Ex II 3 D Ex tD A22 IP66 T80 °C/Ex II 2 D Ex tD A21 IP66 T80 °C • Degree of protection: IP66 • Operating temperature: -25°C to + 45°C • Voltage: 220 - 250 V AC • Emergency duration 3 hours • Through wired • Two M25 entries both ends with M20 thread convertors

Features: • Glass reinforced polyester body with polycarbonate diffuser • Equipped with electronic ballasts for G13 bi-pin fluorescent lamps • End of Life (EOL) conformity • Multiple locking points on diffuser, can be hinged from both sides • 6mm terminals for live, neutral & earth, through wired • Standard dual channel ballast • Safety locking system due to an integrated forced isolating switch • Connection to CEAG emergency light monitoring systems possible

Code Lamp Lampholder Wattage Length (mm) T Class (Gas) Ambient °CnLLK 08018/18 T26 Bi-Pin 2 x 18W 760 T4 -25 to + 50nLLK 08036 T26 Bi-Pin 1 x 36W 1360 T4 -25 to + 50nLLK 08036/36 T26 Bi-Pin 2 x 36W 1360 T4 -25 to + 50nLLK 08058 T26 Bi-Pin 1 x 58W 1660 T4 -25 to + 50nLLK 08058/58 T26 Bi-Pin 2 x 58W 1660 T4 -25 to + 40

CEAG - nLLK 08… Fluorescent Fittings

Technical: • Certification: Ex II 3 G Ex nA de/de mb IIC T4 Ex II 3 D Ex tD A22 IP66 T80° C/ Ex ii D ExtD A21 IP66 T80° C • Degree of protection: IP66 • Operating temperature: -25°C to + 50°C • Voltage: 220 - 250VAC, 195 - 250VDC 50/60Hz • Through wired • Two M25 entries both ends with M20 thread convertors

LIGHTING


Hadar Lighting - HDL220 Fluorescent LuminaireFeatures: • The Zone 2 EEx nA Fluorescent Luminaire is designed from a high specification of corrosion resistant glass, reinforced polyester body and high impact polycarbonate diffuser to give the highest protection to ATEX standards for EEx nA applications • The luminaire features stainless steel diffuser retaining clips and zinc steel gear tray for rapid installation and easy maintenance • Sira certified • Emergency version available - 3 hour duration (available in twin variants only)

• Rapid installation • Ease of maintenance • High Frequency Electronic Ballast • Loop In / Loop Out as standard • Through wired versions available • Low Smoke Zero Halogen option • IP66

Technical: • Enclosure: Corrosion resistant GRP • Diffuser: High Impact Polycarbonate • Retaining Clips: Stainless Steel • Gear Tray: Mild Steel Painted • Control Gear: High Frequency Electronic • T Rating: T4 Gas and Dust • Protection: Ex II 3GD EEx nA II T3/T4 IP65 T140ºC • Certification: Standard - Ex II 3GD EEx nA II T3/T4 IP65, T135ºC/T140ºC Emergency - EEx nC IIC T3/T4 IP65, T135ºC/T140ºC

Code - Standard Lamp Lampholder Wattage Length (mm) T Class (Gas) Ambient °CHDL220SL118 Fluorescent Bi-Pin 1 x 18W 702 T4 -20 to +40HDL220SL136 Fluorescent Bi-Pin 1 x 36W 1312 T4 -20 to +40HDL220SL158 Fluorescent Bi-Pin 1 x 58W 1612 T3 -20 to +50HDL220SL218 Fluorescent Bi-Pin 2 x 18W 702 T4 -20 to +40HDL220SL236 Fluorescent Bi-Pin 2 x 36W 1312 T4 -20 to +40HDL220SL258 Fluorescent Bi-Pin 2 x 58W 1612 T3 -20 to +50Code - Emergency Lamp Lampholder Wattage Length (mm) T Class (Gas) Ambient °CHDL220EL218 Fluorescent Bi-Pin 2 x 18W 702 T4 -15 to +40HDL220EL236 Fluorescent Bi-Pin 2 x 36W 1312 T4 -15 to +40HDL220EL258 Fluorescent Bi-Pin 2 x 58W 1612 T4 -15 to +50Further options available - please call for details

Chalmit - Protecta II Ex n Fluorescent LuminaireATEX Category 3. The Protecta II utilises the proven strength and integrity as the Protecta III but is certified for use in Zone 2, Zone 21 and Zone 22 hazardous areas. The luminaire is recommended for use in areas where high levels of ingress protection is required.

Technical: • Type of Protection: Ex nA (Non-sparking) • ATEX Classification: Group II Category 3 GD • Area Classification: Zone 2 and Zone 22 areas to EN 60079-10-1 and EN 60079-10-2 with installation to EN 60079-14 • Certificate: Type Examination Certificate Baseefa08ATEX0227 IEC Certificate IECExBAS 08.0075 • Enclosure: GRP body with polycarbonate cover and brass suspension points • Coding: II 3 GD Ex nA

• Reflector: White polyester painted zinc coated steel • Control Gear: High Frequency electronic ballast emergency - electronic /inverter • Ingress Protection: IP66/67 to EN 60529 • Battery: Ni-Cd 6V (Emergency version only) • Duration: 3 hours (Emergency version only) • Emergency Output: 18W 32% of one lamp, 36W 14% of one lamp

Code - Standard Wattage Length (mm) T Class (Gas) T °C (Dust) Ambient °CPR2N/218/BI 2 x 18W 742 T4 85 -20 to +50PR2N/136/BI 1 x 36W 1352 T4 85 -20 to +50PR2N/236/BI 2 x 36W 1352 T4 85 -20 to +50PR2N/218/BI/EM 2 x 18W 742 T4 85 -20 to +45PR2N/136/BI/EM 1 x 36W 1352 T4 85 -20 to +45PR2N/236/BI/EM 2 x 36W 1352 T4 85 -20 to +45

Features: • Easy access to suspended control gear tray • High frequency control gear gives 50/60Hz operation, high power factor correction and regulation of lamp output • dc operation (non-emergency only) • Vibration tested to comply with Lloyds/ DNV

• DTS-01 deluge tested • End of life (EOL) protection to IEC 60079-7 (with EOL I and EOL II functionality) • Type Examination Certificate Baseefa08ATEX0228 Coding II 2D Ex tD A21 T85˚C


Wirefield - GRP Fluorescent Battens IP65

Switch High Start Frequency Emergency Length (mm) LampGRP118 GRP118HF GRP118E3 669 1 x 18WGRP136 GRP136HF GRP136E3 1277 1 x 36WGRP158 GRP158HF GRP158E3 1577 1 x 58WGRP170 GRP170HF GRP170E3 1841 1 x 70WGRP218 GRP218HF GRP218E3 669 2 x 18WGRP236 GRP236HF GRP236E3 1277 2 x 36WGRP258 GRP258HF GRP258E3 1577 2 x 58WGRP270 GRP270HF GRP270E3 1841 2 x 70W

GRP body for permanent or arduous industrial and commercial application. Heavy duty, long service life luminaire for mounting directly onto walls and ceilings. Also availble with stainless steel hangers.

HIGH BAY LUMINAIRES - HAZARDOUS AREA ZONE 1

NAVIGATION LIGHTS

Features: • L70 rated for >100,000 hours @ 25°C ambient • 5 year full performance warranty • Low power consumption • Instant on/off operation • Mercury free, lead free • Resistant to shock and vibration

• Superior colour rendition index compared to HPS, LPS & MV • Temperature compensation technology for longer life • SWB/EPR Cable 3 core 1.5mm² CSA or Junction Box option • One man installation • Replaces up to 400W HID fittings

The latest LED generation in an attractive and slim design. Totally maintenance-free. Side Mounting.

Technical:• Housing: Polycarbonate, seawater resistant, UV protected, non-corrosive, non-magnetic, impact andshock resistant• Optics: Innovative lens technology for wide visibility requires only one light-emitting diode• Mounting: Side-mount, pre-wired with 200 mm cable 2 x 0.30 mm2 / AWG 22, 2-hole mounting

• Electrics: Invers polarity protection included, bulb included• Approvals: IMO, BSH, GL, CE, Steuerrad• Ship Type: Sail/Power• Ship Size: < 50 m / < 164 ft.• Voltage: 12 V, 24 V• Visibility: 2 nm

Technical: • Certification: Ex II 2G D Ex d IIB T5 Gb (factory fitted cable) Ex tb IIIC T100°C Db IP66 • IP 66 rated • Operating Voltage: 100-277V AC, 50/60 Hz • Operating Temp: -40°C to +60°C • Lens: Toughened glass • Body: Copper free aluminium

Standard Lamp Wattage T Class (Gas) Ambient °CHBA9C4M Cool White LED 150W T5 -40 to +60

Code Description Wattage Colour3850001000 Starboard Side Light 1.5W Black3851001000 Port Side Light 1.5W Black3852001000 Stern Side Light 1.5W Black

Dialight - SafeSite® LED High Bay Luminaire

Aqua Signal ™ - Series 34 LED Navigation Lights

LIGHTING


The high quality Series 70 are virtually unbreakable and extremely reliable. Their nonmagnetic and seawater resistant polycarbonate housing is self-ventilated and the special tungsten bulb can be changed easily.

R&M MARINE DIVISION Our dedicated Marine Division has extensive knowledge within this diverse industry sector which is used to provide a first class service. We have many years of experience in the supply of specialist marine electrical materials and cables used on MOD Naval vessels, Merchant ships and Commercial vessels.

Technical:• Housing: Polycarbonate, black or white, impact and shock resistant, non-corrosive, non-magnetic, seawater resistant• Optics: Lens: Fresnel, range of visibility 2 nm. Material: plastic, impact resistant & shock-proof, seawater resistant, replaceable• Protection degree: IP 56

• Mounting: Side-mount• Electric: With 2-wire cable, bulb included • Approvals: USCG, IMO, A16, CE, Steuerrad• Ship type: Sail/Power, Sail• Ship size: < 50 m / < 164 ft.• Voltage: 12 V, 24 V• Visibility: 2 nm

Technical: • Application: All vessels ≥ 20 m in length • Housing: Polycarbonate, glass fibre reinforced, other components of non-corrosive materials Self-ventilated Nonmagnetic, seawater resistant • Housing colour: Mat black • Electric: Conus inclusive 1.5 m special connection cable 2 x 1.5 mm², self-protective insulation, class II • Lamp: Easy to change special tungsten bulb • Mounting: Base flange attachment, 4 screws (not included). Allround lights may also be hoisted • Approvals: IMO, BSH, USCG & CCS Available on request • Min. visibility: 3 n.m., masthead light 6 n.m., manoeuvre 5 n.m • Optics: Seawater resistant, special plastic Fresnel lens • Temperature range: -45°C to +45°C, IP56

Code Description Wattage Colour3543102000 Starborad Light 12V 25W Black3543103000 Starborad Light 24V 25W Black3544202000 Port Light 12V 25W Black3544203000 Port Light 24V 25W Black3541002000 Stern Light 12V 10W Black3541003000 Stern Light 24V 10W Black

Code Description Wattage3071003000 Masthead White, 24V 40W3071005000 Masthead White, 230V 65W3074203000 Port Red, 24V 40W3074205000 Port Red, 230V 65W3070103000 Signalling Green, 24V 40W3070105000 Signalling Green, 230V 65W

Code Description Wattage3070203000 Signalling Red, 24V 40W3070205000 Signalling Red, 230V 65W3070703000 Signalling White/Morse Light, 24V 40W3070705000 Signalling White/Morse Light, 230V 65W3073103000 Starboard Green, 24V 40W3073105000 Starboard Green, 230V 65W

Aqua Signal ™ - Series 41 LED Navigation Lights

Aqua Signal™ - Series 70 Navigation Lights


RECESSED FLUORESCENT - HAZARDOUS AREA ZONE 1

SITE LIGHTING - 110V

Glamox - GRX3 DP3 Fluorescent Recessed Emergency Luminaire

Red Arrow - Vision Range of 110V Non-Corrosive Luminaires

A high quality long life luminaire. Suitable for areas where there is a danger of explosion, Ex e for zone 1 and 2, for industrial applications, on ships and oil installations.

Red Arrow high specification non-corrosive fittings have a high ingress protection from moisture, dust, corrosion and vandalism, offering a safer, more efficient alternative to festoon lighting.

Features:• High quality explosion proof luminaire, zone 1• Recessed light fitting for different types of ceilings• Fully adjustable suspension bracket• Double prismatic diffuser (DP3)

Technical:• Ex II 2 G Ex edm IIC T4• Degree of protection: IP54• Operating temperature: -30ºC to +45ºC• Voltage: 220-250V 50/60HZ• Emergency duration 3 hours• Two M20 entries both ends• Electro-galvanised steel housing with white epoxy/polyester powder coated paint finish• Front coverplates (FR) with polycarbonate guard and double prismatic diffuser (DP3) are to be ordered separately • The emergency versions are supplied with integrated battery for 1.5 or 3 hours duration• All emergency fixtures (E1/E3) are prepared for remote control of emergency functions

Technical: • Voltage: 110V • Wattage: Various • Ingress Protection: IP65 • Lamp (not included): T8 fluorescent tubes • Material: Body made of high impact resistant ABS c/w clear polycarbonate diffuser • Finish: Yellow • Ballast: High frequency, low power factor • Emergency: 3 hour back-up also available on selected models • Clips: c/w plastic clips - stainless steel clips available separately • Standards: F mark, CE, BS EN60598-2-1 & BS EN 60598-2-22

Code Product Name Lamp Lampholder Wattage Ambient °C588229101 GRX3 218 HF T8 G13 2 x 18W -30 to +45588249101 GRX3 236 HF T8 G13 2 x 36W -30 to +45588228701 GRX3-E3 218 HF T8 G13 2 x 18W -30 to +45588248701 GRX3-EI 236 HF T8 G13 2 x 36W -30 to +45

Code - Standard Code - Emergency Lamp Lamp Holder Wattage Length (mm)WF218SV EWF218SV T8 G13 2 x 18W 665WF36SV - T8 G13 1 x 36W WF58SV EWF58SV T8 G13 1 x 58W 1586WF258SV EWF258SV T8 G13 2 x 58W 1565

LIGHTING


Technical: • Type of Protection: Ex nA nR (Non-sparking, Restricted Breathing) • ATEX Classification: Group II Category 3 G • Area Classification: Zone 2 areas to EN 60079-10-1 and • Certificate: EN 60079-10-2 with installation to EN 60079-14 Type Examination Certificate BAS04ATEX0393X • Coding: II 3 G Ex nAR II

• Enclosure: Painted aluminum body with glass globe. Silicone rubber gasket. Stainless steel fasteners • Ingress Protection: IP66 to EN 60529

Features: • Compact size and low weight • Easy access for wiring and control gear • Unrestricted breathing gear enclosure removes the need for special glands or cable • Corrosion resistant

• Excellent light distribution • Suitable for a wide range of ambient temperatures from -45˚C to +55˚C, dependant on lamp type and wattage • Option available for Zone 22 combustable dust environments

WELL-GLASS LUMINAIRES - HAZARDOUS AREA ZONE 2Chalmit - Eclipse II Well-Glass Luminaire

Chalmit - Eclipse Junior Well-Glass Luminaire

ATEX Category 3. The Eclipse II well-glass has been designed to make installation quick and simple. The luminaire also features a swing barrel nut system. This allows prior installation and wiring of the mounting base without the need to support the body and lamps.

Ex n ATEX Category 3. The Eclipse Junior is a compact wellglass that incorporates the low maintenance features of the Eclipse II. Its low profile design and range of mounting options, offers an all round lighting solution in areas of limited space. The junior is available with a range of lamp types up to 150W and is suitable for use at low temperatures (-45°C).

Technical: • Type of Protection: Ex nA nR (Non Sparking Restricted Breathing) • ATEX Classification: Group II Category 3 G • Area Classification: Zone 2 areas to EN 60079-10-1 and EN 60079-10-1 with installation to EN 60079-14 • Certificate: Type Examination Certificate Baseefa04ATEX0393X

• Coding: II 3 G Ex nA R II • Enclosure: Painted aluminium body with glass globe. Silicone rubber gasket. Single stainless steel barrel nut fastener. • Ingress Protection: IP66 to EN 60529

Code Lamp Lampholder Wattage T Class (Gas) T °C (Dust) Ambient °CEC2N/050/HS HPS E27 50W T4 110 -45 to +55EC2N/070/MS HPS/Metal Halide E27 70W T4 110 -45 to +55EC2N/100/HS HPS E40 100W T4 110 -45 to +55EC2N/150/MS HPS/Metal Halide E40 150W T4 110 -45 to +55EC2N/250/MS HPS/Metal Halide E40 250W T4 130 -45 to +50EC2N/400/MS HPS/Metal Halide E40 400W T3 160 -45 to +45EC2N/080/M Mercury Vapour E27 80W T3 135 -20 to +45EC2N/125/MV Mercury Vapour E27 125W T3 135 -20 to +45EC2N/250/MV Mercury Vapour E40 250W T3 135 -20 to +40EC2N/400/MV Mercury Vapour E40 400W T3 180 -20 to +35GOST R Approved, IECEx Compliant. Other options available - please call for details.

Code Lamp Lampholder Wattage T Class (Gas) T °C (Dust) Ambient °CECJN/050/HS HPS E27 50W T4 130 -45 to +50ECJN/070/MS HPS/Metal Halide E27 70W T4 130 -20 to +50 ECJN/080/MV MBFU E27 80W T3 135 -20 to +40 ECJN/125/MV MBFU E27 125W T3 140 -20 to +50 ECJN/113/CF Compact Fluorescent G24 1X13W T4 130 -20 to +50ECJN/118/CF Compact Fluorescent G24 1X18W T4 130 -20 to +50ECJN/126/CF Compact Fluorescent G24 1X26W T4 130 -20 to +50ECJN/150/GL GLS E27 150W T4 100 -45 to +55GOST R Approved,CEPEL Approved. Other options available - please call for details.

Features: • Easy access for wiring and control gear • Unrestricted breathing gear enclosure removes the need for special glands or cable • Corrosion resistant • High, medium and low bay lighting

• Excellent light distribution • Suitable for a wide range of ambient temperatures from -45°C to +55°C, dependant on lamp type and wattage • Option available for Zone 22 combustable dust environments


Safe and convenient, our hinged columns offer a long-term maintenance option that saves clients money.

In addition to our full range of traditional lighting columns. The ILS hinged ‘Echalon’ column is a truly revolutionary product. Available in 4 and 6 metres and manufactured in Aluminium the Echalon column uses internal counter-balances to ensure it can be lowered and lifted by a single person. In fact, it can be operated with a single finger! This operation method means your lighting can be maintained without a cherry picker or scaffold system, and requires no additional equipment – unlike competing products – other than the necessary key. Benefits • Improved strength: over 20% increase • Improved appearance: there is a better surface finish with the new gravity die casting • Ease of operation: all components are contained within the hinge cartridge, there are no removable parts • Easy to lift and raise: single operator use when using the unit to both lower and raise the column • Safe working: the operator can safely work on the lantern with the folded column in the horizontal position • Use with most lanterns: the hinge can accommodate the vast majority of different lantern weights • Cable entry: this is through the centre of the hinge cartridge; there is no chance of cable damage when raising or lowering the column • Long life components: all our springs are powder coated to extend their life • Anti vandal door bolts: fitted as standard • Ease of maintenance: in the unlikely event of failure, all major components within the mechanism can be replaced in situ

Reduce Maintenance costs & Improve Safety with the ILS Echalon Column.

LIGHTING COLUMNS

CIRCUIT BREAKERS

CONTACTORS & RELAYS

CONTROL DEVICES - CONTROL STATIONS

CONTROL DEVICES - EMERGENCY STOPS

CONTROL DEVICES - ENCLOSURES

CONTROL DEVICES - SWITCHES

STARTERS

SWITCHES - LIMIT SWITCHES

SWITCH DISCONNECTORS/ISOLATORS

TIMERS & RELAYS

VARIABLE SPEED DRIVES

MOTOR CONTROL GEAR

CIRCUIT BREAKERS

S200M Series BS EN 60898 10kA

ABB - Protecta Type A Distribution Board MCB

Code Type B Type C RatingS201M•6 2CDS271001R0065 2CDS271001R0064 6A 10kAS201M•8 - 2CDS271001R0084 8A 10kAS201M•10 2CDS271001R0105 2CDS271001R0104 10A 10kAS201M•13 2CDS271001R0135 2CDS271001R0134 13A 10kAS201M•16 2CDS271001R0165 2CDS271001R0164 16A 10kAS201M•20 2CDS271001R0205 2CDS271001R0204 20A 10kAS201M•25 2CDS271001R0255 2CDS271001R0254 25A 10kAS201M•32 2CDS271001R0325 2CDS271001R0324 32A 10kAS201M•40 2CDS271001R0405 2CDS271001R0404 40A 10kAS201M•50 2CDS271001R0505 2CDS271001R0504 50A 10kAS201M•63 2CDS271001R0635 2CDS271001R0634 63A 10kA

• Add tripping curve for B or C eg: S201MB6Type B - Suitable for small inrush or switching surges, heating loads and tungsten lightingType C - Suitable for moderate switching surges for sort duration. eg. discharge lamps

ABB - Protecta Type B Distribution Board MCB Type C

Code Order Code RatingS203MC1 2CDS273001R0014 1A 10kAS203MC2 2CDS273001R0024 2A 10kAS203MC3 2CDS273001R0034 3A 10kAS203MC4 2CDS273001R0044 4A 10kAS203MC6 2CDS273001R0064 6A 10kAS203MC10 2CDS273001R0104 10A 10kAS203MC13 2CDS273001R0134 13A 10kA


• S200M Series • BS EN 60898 10kA (BS EN60947-2 15kA<50A) • Suitable for cable protection and moderate switching surges for short duration. eg. discharge lamps. • Triple Pole


Code Order Code RatingS202MC0.5 2CDS272001R0984 0.5A 10kAS202MC1 2CDS272001R0014 1A 10kAS202MC2 2CDS272001R0024 2A 10kAS202MC3 2CDS272001R0034 3A 10kAS202MC6 2CDS272001R0064 6A 10kAS202MC8 2CDS272001R0084 8A 10kAS202MC10 2CDS272001R0104 10A 10kA


• S200M Series • BS EN 60898 10kA (BS EN60947-2 15kA<50A) • Suitable for cable protection and moderate switching surges for short duration eg. discharge lamps • Double Pole


MOTOR CONTROL GEAR


ABB - Protecta Type A & B Distribution Board MCB Type D

Code - SP Order Code Code - DP Order Code RatingS201D1 2CDS251001R0011 S202D1 2CDS252001R0011 1A 6kAS201D2 2CDS251001R0021 S202D2 2CDS252001R0021 2A 6kAS201D3 2CDS251001R0031 S202D3 2CDS252001R0031 3A 6kAS201D4 2CDS251001R0041 S202D4 2CDS252001R0041 4A 6kAS201D6* 2CDS251001R0061 S202D6 2CDS252001R0061 6A 6kAS201D10* 2CDS251001R0101 S202D10 2CDS252001R0101 10A 6kAS201D16* 2CDS251001R0161 S202D16 2CDS252001R0161 16A 6kAS201D20* 2CDS251001R0201 S202D20 2CDS252001R0201 20A 6kAS201D25* 2CDS251001R0251 S202D25 2CDS252001R0251 25A 6kAS201D32* 2CDS251001R0321 S202D32 2CDS252001R0321 32A 6kAS201D40* 2CDS251001R0401 S202D40 2CDS252001R0401 40A 6kAS201D50* 2CDS251001R0501 S202D50 2CDS252001R0501 50A 6kAS201D63* 2CDS251001R0631 S202D63 2CDS252001R0631 63A 6kA*Type A Distribution Board

• S200 Series • Suitable for cable protection and high inrush applications such as transformers

ABB - Protecta Type A Distribution Board RCCB

Code Order Code RatingF202AC-63/0.03 2CSF202001R1630 63A 30kAF202AC-63/0.3 2CSF202001R3630 63A 300kAF202AC-80/0.03 2CSF202001R1800 80A 30kAF202AC-100/0.03 2CSF202001R1900 100A 30kA

• Double Pole

ABB - Protecta Type B Distribution Board RCCB

Code Order Code RatingF204AC-63/0.03 2CSF204001R1630 63A 30kAF204AC-63/0.1 2CSF204001R2630 63A 100kAF204AC-63/0.3 2CSF204001R3630 63A 300kAF204AC-80/0.03 2CSF204001R1800 80A 30kAF204AC-100/0.03 2CSF204001R1900 100A 30kAF204AC-100/0.1 2CSF204001R2900 100A 100kAF204AC-100/0.3 2CSF204001R3900 100A 300kA

• 4 Pole • F200 Series • To BS EN 61008

ABB - Protecta type B Distribution Board Switch DisconnectorsCode Order Code Description RatingE203/100R 2CDE283001R0100 TP Switch Disconnector (No Kit Reqd) 100AE203/125R 2CDE283001R0125 TP Switch Disconnector (No Kit Reqd) 125A1SDA051327R1 1SDA051327R1 TP Switch Disconnector MCCB (Requires Kit) 250A


Code RatingPKZM0-0.16 0.1A-0.16APKZM0-0.25 0.16A-0.25APKZM0-0.4 0.25A-0.4APKZM0-0.63 0.4A-0.63APKZM0-1 0.63A-1A

Code RatingPKZM0-1.6 1A-1.6APKZM0-2.5 1.6A-2.5APKZM0-4 2.5A-4APKZM0-6.3 4A-6.3APKZM0-10 6.3A-10A

Code RatingPKZM0-12 8A-12APKZM0-16 10A-16APKZM0-20 16A-20APKZM0-25 20A-25APKZM0-32 25A-32A

Catalogue No Description Finish For Use WithNZM2-XHBR Main Switch Assembly Kit c/w Rotary Handle Red NZM2NZM2-XTVD Door Handle - Rotary Coupling IP66 Black/Grey NZM2NZM3/4-XV6 Extension Shaft - 600mm NZM3NZM3-XHBR Main Switch Assembly Kit c/w Rotary Handle Red NZM3NZM3-XKSA Cover, For 3P NZM3NZM3-XTVDV-0 Door Handle - Rotary Coupling IP66 Black/Grey NZM3NZM4-XDV Rotary Handle c/w Drive & Insulating, Surround Black/Grey NZM4NZM4-XDVR Rotary Handle c/w Drive & Insulating, Surround Red/Yellow NZM4NZM4-XKSA Cover, For 3P NZM4NZM4-XTVD Door Handle - Rotary Coupling IP66 Black/Grey NZM4Full range of NZM circuit breakers available - please call for details

Code Thermal Setting RangeGV2ME04 0.40-0.63AGV2ME05 0.63-1AGV2ME06 1-1.6AGV2ME07 1.6-2.5AGV2ME08 2.5-4A

Code Thermal Setting RangeGV2 ME10 4-6.3AGV2ME14 6-10AGV2ME16 9-14AGV2 ME20 13-18AGV2 ME22 20-25A

MOELLER - NZM Range of Circuit Breaker Accessories

Schneider - TeSys GV2 ME Motor Circuit Breakers

Schneider - TeSys GV2 Accessories

• The PKZM 0 now switches motors up to 32 A • PKXM 0 Short circuit rating (400 V) is 150 kA up to 10 A and 50 kA up to 32 A

• Screw clamp terminals • Push button control

MOELLER - PKZ Range of Motor Protective Circuit Breakers (MPCB)

Code DescriptionGV2G254 2 Way 3-Pole 63A Busbar With 54Mm PitchGV2G354 3Way 3-Pole 63A Busbar With 54Mm PitchGV2G454 4 Way 3-Pole 63A Busbar With 54Mm PitchGV2G554 5 Way 3-Pole 63A Busbar With 54Mm PitchGV2AF01 Adapter Plate For Mounting GV2-M & LC1-K/Lp1-K ContactorGV2AD0110 Auxiliary Contact Block & Fault Signalling ContactGVAD1010 Auxiliary Contact Block & Fault Signalling ContactGV1L3 Current Limiter - 100KaGVAE11 Front Mounted Instantaneous Auxiliary N/O + N/C ContactGV2E01 IP55 Sealing Kit For Encloures & Front Plate

Code DescriptionGV1G10 Protective End Cover For Unused Busbar OutletsGV2K03 Red Mushromm Head “Stop” PushbuttonXPSAC5121 SAFETY MOD CAT.3 24V AC/DCGVAU225 Shunt Trip - 220VGVAU385 Shunt Trip - 380VGVAN11 Side Mounted Instantaneous Auxiliary N/O + N/C ContactGV2MC01 Surface Mounting Enclosure For GV2-ME IP 41GV2MC02 Surface Mounting Enclosure For GV2-ME IP55GV2G05 Terminal Blocks For Supply To One Or More GV2-G Busbar SetsGV1G09 Terminal Blocks of One Or More GV2-G Busbar Sets

MOTOR CONTROL GEAR


ABB - AS Range of Contactors

Part No. AS09-30-10-20AS09-30-01-20AS09-30-10-16AS09-30-01-16AS09-30-10-26AS09-30-01-26AS09-30-10-28AS09-30-01-28AS12-30-10-20AS12-30-01-20AS12-30-10-16AS12-30-01-16AS12-30-10-26AS12-30-01-26AS12-30-10-28AS12-30-01-28AS16-30-10-20AS16-30-01-20AS16-30-10-16AS16-30-01-16AS16-30-10-26AS16-30-01-26AS16-30-10-28AS16-30-01-28

Code 1SBL101001R20101SBL101001R20011SBL101001R16101SBL101001R16011SBL101001R26101SBL101001R26011SBL101001R28101SBL101001R28011SBL111001R20101SBL111001R20011SBL111001R16101SBL111001R16011SBL111001R26101SBL111001R26011SBL111001R28101SBL111001R28011SBL121001R20101SBL121001R20011SBL121001R16101SBL121001R16011SBL121001R26101SBL121001R26011SBL121001R28101SBL121001R2801

Rating 24V 50/60HZ 4kW24V 50/60HZ 4kW120V 60HZ 4kW120V 60HZ 4kW230V 50/60HZ 4kW230V 50/60HZ 4kW400V 50/60HZ 4kW400V 50/60HZ 4kW24V 50/60HZ 5.5kW24V 50/60HZ 5.5kW120V 60HZ 5.5kW120V 60HZ 5.5kW230V 50/60HZ 5.5kW230V 50/60HZ 5.5kW400V 50/60HZ 5.5kW400V 50/60HZ 5.5kW24V 50/60HZ 7.5kW24V 50/60HZ 7.5kW120V 60HZ 7.5kW120V 60HZ 7.5kW230V 50/60HZ 7.5kW230V 50/60HZ 7.5kW400V 50/60HZ 7.5kW400V 50/60HZ 7.5kW

AuxiliaryContacts1 N/O1 N/C1 N/O1 N/C1 N/O1 N/C1 N/O1 N/C1 N/O1 N/C1 N/O1 N/C1 N/O1 N/C1 N/O1 N/C1 N/O1 N/C1 N/O1 N/C1 N/O1 N/C1 N/O1 N/C

• 3 Pole and 1 built-in auxiliary contact • 4 to 7.5 kW • AC operated • Used for controlling 3-phase motors and power circuits up to 690 V AC and 220 V DC • Spring Terminals

• Compact range of 3 pole contactors complete with integral N/O or N/C auxiliary contact • AC or DC operation • 2 and 4 pole auxiliary contact modules

Code Description RatingDILEM-01(240V50HZ) TP+1NC Aux. 8.8A 240V ACDILEM-01-G(24VDC) TP+1NC Aux. 8.8A 24V DCDILEM-10(240V50Hz TP+1NO Aux. 8.8A 240V ACDILEM-10(24V50Hz) TP+1NO Aux. 8.8A 24V ACDILEM-10-G(24VDC) TP+1NO Aux 8.8A 24V DC

MOELLER - DIL EM Mini Contactors

CONTACTORS & RELAYS

GET ALL YOUR ELECTRICAL NEEDS UNDER ONE ROOFR&M Stock all of your Motor Control needs, so come and visit one of our Trade Counters at the Branches Listed on the back cover.


Auxiliary KW AmpsCode Contacts AC3 AC3DILM7-01(***) 1 N/O 3 7DILM7-10(***) 1 N/C 3 7DILM9-01(***) 1 N/O 4 9DILM9-10(***) 1 N/C 4 9DILM12-01(***) 1 N/O 5.5 12DILM12-10(***) 1 N/C 5.5 12DILM17-01(***) 1 N/O 7.5 18DILM17-10(***) 1 N/C 7.5 18DILM25-01(***) 1 N/O 11 25DILM25-10(***) 1 N/C 11 25

Auxiliary KW AmpsCode Contacts AC3 AC3DILM32-01(***) 1 N/O 15 32DILM32-10(***) 1 N/C 15 32DILM40-(***) - 18.5 40DILM50-(***) - 22 50DILM65-(***) - 30 65DILM80-(***) - 37 80DILM95-(***) - 45 95DILM115-(***) - 55 115DILM150-(***) - 75 150DILM170-(***) - 90 70

Accessories Code Description Contactor TypeDILA-XHI10-S 1 NO Auxiliary Contact Side Mounting DILM7 - DILM12DILA-XHI01-S 1 NC Auxiliary Contact Side Mounting DILM7 - DILM12DILM32-XHI11 1 NO & 1 NC Auxiliary Contacts Top Mounting DILM7 - DILM32 & DILMP20DILM32-XHI02 2 NC Auxiliary Contacts Top Mounting DILM7 - DILM32 & DILMP20DILM32-XHI22 2 NO & 2 NC Auxiliary Contacts Top Mounting DILM7 - DILM32 & DILMP20DILM32-XHI11-S 1 NC & 1 NC Auxiliary Contact Side Mounting DILM17 - DILM32DILM1000-XHI11-SI 1 NC & 1 NC Auxiliary Contact Side Mounting DILM40 - DILM170DILM150-XHI11 1 NC & 1 NC Auxiliary Contact Top Mounting DILM40 - DILM170DILM150-XHI20 2 NO Auxiliary Contact Side Mounting DILM40- DILM170DILM150-XHI02 2 NC Auxiliary Contact Side Mounting DILM40- DILM170DILM150-XHI22 2 NO 2 NC Auxiliary Contact Side Mounting DILM40- DILM170

MOELLER - DIL M Contactors

• For use with DILM Contactors • For direct mounting on contactor • Each has an electrically separate pair of control contacts 1 NO & 1 NC

• Same dimensions for AC and DC contactors • Auxiliary contact built in up 38A • DC contactors include a suppressor circuit up to 170 A • From 15 A, the DC contactors have an electronic drive that removes the need for coupling relays • 3 Pole

*** Donates voltage Voltage Options: AC - 24V 50 Hz, 110V 50 Hz, 230v 50Hz, 400V 50Hz DC - 24V DC

Code Rating For Use WithZB12-0.4 0.24A-0.4A DILM7-DILM12ZB12-0.6 0.4A-0.6A DILM7-DILM12ZB12-1.0 0.6A-1.0A DILM7-DILM12ZB12-1.6 1A-1.6A DILM7-DILM12ZB12-2.4 1.6A-2.4A DILM7-DILM12ZB12-4 2.4A-4A DILM7-DILM12ZB12-6 4.6A-6A DILM7-DILM12ZB12-10 6A-10A DILM7-DILM12ZB12-12 9A-12A DILM7-DILM12ZB12-16 12A-16A DILM7-DILM12ZB32-0.4 0.24A-0.4A DILM17-DILM32ZB32-0.6 0.4A-0.6A DILM17-DILM32ZB32-1.0 0.6A-1.0A DILM17-DILM32

Code Rating For Use WithZB32-1.6 1A-1.6A DILM17-DILM32ZB32-2.4 1.6A-2.4A DILM17-DILM32ZB32-4 2.4A-4A DILM17-DILM32ZB32-6 4A-6A DILM17-DILM32ZB32-10 6A-10A DILM17-DILM32ZB32-16 10A-16A DILM17-DILM32ZB32-24 16A-24A DILM17-DILM32ZB32-32 24A-32A DILM17-DILM32ZB65-40 24A-40A DILM40-DILM65ZB65-57 40A-57A DILM40-DILM65ZB65-65 57A-65A DILM40-DILM65ZB150-100 70A-100A DILM80-DILM170ZB150-125 95A-125A DILM80-DILM170

MOELLER - ZB Overload Relay Range

MOTOR CONTROL GEAR


Schneider - TeSys D Low Consumption Contactors - AC Operated

Schneider - TeSys D Low Consumption Contactors - DC Operated

• AC Operated for Motor Control in Category AC-3 • Application: Automation Systems • 3 Pole

• DC Operated for Motor Control in Category AC-3 • Application: Automation Systems • 3 Pole • Contactors are 24v 3 pole devices operating via 24V DC supply to the coil

SupplyCode to Coil VoltageLC1D09B7 24V 9A 50/60HzLC1D09F7 110V 9A 50/60HzLC1D09M7 220V 9A 50/60HzLC1D09P7 230V 9A 50/60HzLC1D09U7 240V 9A 50/60HzLC1D09N7 415V 9A 50/60HzLC1D12B7 24V 12A 50/60HzLC1D12E7 48V 12A 50/60HzLC1D12F7 110V 12A 50/60HzLC1D12M7 220V 12A 50/60HzLC1D12U7 240V 12A 50/60HzLC1D12P7 380V 12A 50/60HzLC1D12N7 415V 12A 50/60HzLC1D18B7 24V 18A 50/60HzLC1D18F7 110V 18A 50/60HzLC1D18M7 220V 18A 50/60HzLC1D18U7 240V 18A 50/60Hz

SupplyCode to Coil VoltageLC1D18N7 415V 18A 50/60HzLC1D25B7 24V 25A 50/60HzLC1D25E7 48V 25A 50/60HzLC1D25F7 110V 25A 50/60HzLC1D25M7 220V 25A 50/60HzLC1D25P7 230V 25A 50/60HzLC1D25U7 240V 25A 50/60HzLC1D25N7 415V 25A 50/60HzLC1D32B7 24V 32A 50/60HzLC1D32F7 110V 32A 50/60HzLC1D32P7 230V 32A 50/60HzLC1D32U7 240V 32A 50/60HzLC1D32N7 415V 32A 50/60HzLC1D80F5 110V 80A 50HzLC1D80F7 110V 80A 50/60HzLC1D80P7 230V 80A 50/60HzLC1D80U5 240V 80A 50Hz

Code Supply to Coil VoltageLC1 D09BD 24V DC 4kW 9ALC1 D12BD 24V DC 5.5kW 12ALC1D18BD 24V DC 9kW 18ALC1D25BD 24V DC 11kW 25ALC1D32BD 24V DC 15kW 32A

Schneider - TeSys D Contactor & Relay AccessoriesCode DescriptionLA4DA2E Module 24/48VLA4DFB Interface Module 24VLA4KC1B Suprn Module 12-24VLA4KE1B Suprn Module 12-24VLA5FF431 Contact SetLA6DK10B Latch Block 24VLA7D3064 Terminal Block 35mmLA9D4002 Mech Interlock KitLA9D098 InterlockLA9F702 Terminal ShroudLA9F703 Terminal Shroud

Code DescriptionLA9FF970 Mechanical Interlock KitLA9FG970 Mechanical Interlock KitLA9FJ970 Mechanical Interlock KitLAD4RCU RC Cont Block 110-240VLAD4VE Varistor Block 24-48VLAD4VU Varistor Block 110-250VLAD703F Reset Device 110VLAD7B106 Terminal BlockLAD 9R1 Mech Interlock KitLAD 9R1V Mech Interlock Kit


Schneider - TeSys D Auxilliary Contact Blocks

Schneider-TeSysKContactorsDCOperatedforMotorControlinCategoryAC-3

Schneider - TeSys D Instantaneous Auxiliary Contact Blocks

Schneider - TeSys D Thermal Overload Relays

• Time Delay • For connection by screw clamp terminals

• Control Circuit: DC or low consumption • Screw clamp connection

• For use in normal operating environments • For connection by screw clamp terminals

• Class 10A with connection screw clamp terminal • 3 Pole • For use with fuses or magnetic circuit breakers - GV2 L & GV3 L • For use with contactors LC1

Code - Front Mount ContactsLAD N01 1 N/CLAD N02 2 N/CLADN04 4 N/CLAD N10 1 N/OLAD N11 1 N/O + 1 N/C

Code - Side Mount ContactsLAD8N11 1 N/O + 1 N/C

Code - Front Mount ContactsLADN13 1 N/O + 3 N/CLAD N20 2 N/OLAD N22 2 N/O + 2 N/CLADN31 3 N/O + 1 N/CLADN40 4 N/O

Code - Side Mount ContactsLAD8N20 2 N/O

Code Relay Setting RangeLRD 02 0.16-0.25ALRD03 0.25-0.4ALRD04 0.4-0.63ALRD05 0.63-1ALRD06 1-1.6ALRD07 1.6-2.5ALRD08 2.5-4ALRD 10 4-6ALRD 12 5.5-8A

Code Relay Setting RangeLRD14 7-10ALRD16 9-13ALRD 21 12-18ALRD 22 16-24ALRD32 23-32ALRD3355 30-40ALRD3357 37-50ALRD3359 48-65A

Code - On Delay Contacts Time Delay LADT0 1 N/O + 1 N/C 0.1-3 SecsLADT2 1 N/O + 1 N/C 0.1-30SecsLADS2 1 N/O + 1 N/C 0.1-30 SecsLADT4 1 N/O + 1 N/C 10-180 Secs

Code - Off Delay Contacts Time Delay LADR0 1 N/O + 1 N/C 0.1-3 SecsLADR2 1 N/O + 1 N/C 0.1-30 SecsLADR4 1 N/O + 1 N/C 10-180 Secs

Code Contacts Supply to CoilLP1K0601BD 1 N/C 24VLP1K0610BD 1 N/C 24VLP1 K0901BD 1 N/C 24VLP1 K0910BD 1 N/C 24V

MOTOR CONTROL GEAR


Schneider-ACOperatedforMotorControlinCategoryAC-3

Schneider - TeSys K Auxiliary Contact Blocks

Schneider - TeSys K Thermal Overload Relays

Schneider - Harmony® XAL Control Stations

Schneider - XAC Pendant Control Stations - Components

Schneider - Harmony XAC-A Pendant Control Stations

• Screw clamp connection

• Recommended for standard applications • Clip on front mounting with screw clamp connection • 1 block per contactor • Screw clamp terminals

• 3 Pole relays with screw clamp terminals

• For XB5 Push buttons, switches and pilot lights • ØD 22mm with plastic bezel

Code Contacts Supply to CoilLC1K0610B7 1 N/O 24VLC1K0610F7 1 N/O 110VLC1K0610U7 1 N/O 230/240VLC1K0610N7 1 N/O 400/415VLC1K0910B7 1 N/O 24VLC1K0910F7 1 N/O 110VLC1K0901F7 1 N/C 110VLC1K0910U7 1 N/O 240v

Code ContactsLA1 KN02 2 N/CLA1KN04 4 N/CLA1 KN11 1 N/O + 1 N/CLA1 KN20 2 N/O

Code ContactsLA1 KN22 2 N/O + 2 N/CLA1KN31 3 N/O + 1 N/CLA1KN40 4 N/O

Code Relay Setting RangeLR2K0304 0.36-0.54ALR2K0305 0.54-0.8ALR2K0306 0.8-1.2ALR2K0307 1.2-1.8ALR2K0308 1.8-2.6A

Code Relay Setting RangeLR2K0310 2.6-3.7ALR2K0312 3.7-5.5ALR2K0314 5.5-8ALR2K0316 8-11.5ALR2K0321 10-14A

Code Description ColourXACA9411 Booted Operator WhiteXACA9412 Booted Operator Black

Code DescriptionXAC-A201 1NO StandardXAC-A2113 1NO+1NO 1NC Emer Stop, Booted

CONTROL DEVICES - CONTROL STATIONS

For control of single hoist motors. • Pistol Grip • Ambient air temperature for operation : -25...70 °C • Ingress Protection: IP65 • Material: Polypropolyne


Schneider - XAL Control Station - Emergency Stop Function

Schneider - XAL Control Station - Two Function

Schneider - Control Stations - Standard Contact Blocks

• ØD 40mm • Red Turn to Release • Light Grey Base/Yellow Lid

• 2 Spring Return Push Buttons • Light Grey Base/Dark Grey Lid

Code DescriptionXALK178F 1 Mushroom Head Pushbutton - Trigger Action

Code DescriptionXALD222 1 x White, 1 x Black Flush. Marked ih

Code DescriptionZENL111 1 N/OZENL1121 1 N/C

CONTROL DEVICES - EMERGENCY STOPSABB - Emergency Stop Device

MOELLER - RMQ-Titan® Button - Emergency Stop

Code Description Size(mm)1SFA619500R1041 Twist Release 1N/C 301SFA619500R1051 Twist Release 2N/C 301SFA619500R1071 Twist Release 1N/O + 1N/C 301SFA619550R1041 Twist Release 1N/C 401SFA619550R1051 Twist Release 2N/C 401SFA619550R1071 Twist Release 1N/O / 1N/C 401SFA619552R1051 Key Release 2N/C 401SFA619552R1071 Key Release 1N/O + 1N/C 40

• Mushroom head

Code DescriptionM22-PV Non Illuminated, Pull To ReleaseM22-PVL Illuminated, Pull To ReleaseM22-PVT Non Illuminated, Twist To ReleaseM22-PVLT Illuminated, Twist To ReleaseM22-PVS Key To ReleaseFAK-R/V/KC11/IY Mushroom Head, Tamperproof

• IP66, IP69K • Red

Schneider - XAL Control Station - Start / Stop Function • 2 Spring Return Push Buttons • Light Grey Base/Dark Grey Lid

Code DescriptionXALD213 1 x Green, 1 x Red Flush. Marked I - OXALD215 1 x Green, 1 x Red Flush. Marked Start - Stop

MOTOR CONTROL GEAR


Schneider-XB4EmergencyStopDevise

Schneider-XB5EmergencyStopDevise

• Red • Mushroom Heads

• Red • Mushroom Heads

Code DescriptionZB4BS14 Key Release, 40mm ØDZB4BS44 Turn to Release, 30mm ØDZB4BS54 Turn to Release, 40mm ØDZB4BS64 Turn to Release, 60mm ØDZB4BS844 Trigger Action Turn To Release, 40mm Ød

Code DescriptionZB5AS844 Trigger Turn To Rel.ZB5AS944 Trigger Key Release

CONTROL DEVICES - ENCLOSURES

CONTROL DEVICES - SWITCHES

ABB - Enlcosures

ABB - Pilot Light Heads

ABB Control Devices

MOELLER - RMQ-Titan® Enclosure

Code Description 1SFA619821R1000 Compact Enclosure 1 Hole - Yellow 1SFA619821R1001 Compact Enclosed E-Stop 1SFA619821R2001 Compact Enclosed E-Stop With Shroud 1SFA619920R8053 E-Stop Shroud For Compact Enclosure 1SFA619100R1015 CP1-10W-10 Compact Pushbutton 1SFA619200R1021 C2SS1-10R-20 Compact Selector Switch

Code Description 1SFA619402R100* Pilot Light Head* Please specify colour - Red, Green, Yellow, Blue, White, Clear

• ABB’s entire Compact Range are approved to IP67 and IP69K • The Compact Range features an all-in-one construction and rugged design for added simplicity and ease of installation • ØD 22 mm

Code DescriptionM22-I1 One WayM22-I2 2 Ways

• Surface Mounting • IP67, IP69K High Grade Steel Screws • White with anthracite base colour


ABB - Push Buttons, Spring Return - Heads Only

ABB - Selector Switches - Heads Only

Code Description 1SFA619100R101* Contacts 1N/O1SFA619100R102* Contacts 2N/O1SFA619100R104* Contacts 1N/C1SFA619100R107* Contacts 1N/O + 1N/C* Please specify colour - Green, Yellow, Blue, Black

Code Description Position1SFA619200R1016 Stay Put Switch 1N/O BC1SFA619200R1026 Stay Put Switch 2N/O BC1SFA619200R1076 Stay Put Switch 1N/O + 1N/C BC1SFA619201R1016 Stay Put Switch 1N/O BC1SFA619201R1026 Stay Put Switch 2N/O AC1SFA619201R1046 Stay Put Switch 1N/C AC1SFA619201R1076 Stay Put Switch 1N/O + 1N/C AC1SFA619210R1026 Stay Put Switch Position 2N/O ABC1SFA619210R1076 Stay Put Switch Position 1N/O + 1N/C ABC

• Flush Push • C/W Black Bezel

• Black

Code (add colour) DescriptionM22-D-** Non Illuminated, FlushM22-DH-** Non Illuminated, ExtendedM22-DL-** Illuminated, FlushM22-DLH-** Illuminated, ExtendedWhen Ordering Replace ** with S for Black, W for White, R for Red, G for Green, Y for Yellow and B for Blue

MOELLER - RMQ-Titan® Control Circuit Devices

MOELLER - RMQ-Titan® Actuators - Pushbutton

Modern styling has been combined with an optimum range of functions – ideal for use on machines and on panels. The ergonomically shaped button elements are matched to the shape of a fingertip for even more comfortable operation.

RMQ-Titan control circuit devices emit light non-stop for over 100,000 hours. Special lenses and coloured LEDs offer enduring reliability at a very attractive price. Emergency-Stop actuators are now illuminated as well. This safety component is thus clearly visible even in dark rooms and a separate indicator light is not required.

• Spring Return • IP67, 69K

Code DescriptionM22-AMC Compact Indicator - without buzzerM22-XAM Indicator - Continuous Tone 24V AC/DCM22-XAMP Indicator - Pulsed Tone 24V AC/DC

• IP40MOELLER - RMQ-Titan® Acoustic Indicators

Code Description PositionM22-WS Spring Return 2M22-WRS Stay-Put 2M22-WRS3 Stay-Put 3

• IP66 • Black

MOELLER - RMQ-Titan® Actuators - Key Operated

MOTOR CONTROL GEAR


Code DescriptionM22-K10 Front Fixing 1 N/OM22-K01 Front Fixing 1 N/CM22-KC10 Base Fixing 1 N/OM22-KC01 Base Fixing 1 N/C

MOELLER - RMQ-Titan® Contact Blocks

MOELLER - RMQ-Titan® Indicator Lights

MOELLER - RMQ-Titan® Indicator Light LED Elements

MOELLER - RMQ-Titan® Selector Switches

Code (add colour) Description RatingM22-LED-** Front Fixings 12-30V AC/DCM22-LED230-** Front Fixings 85-264 ACWhen Ordering Replace ** with W for White, R for Red, G for Green, Y for Yellow and B for Blue

Code DescriptionM22-L-** Flush Indicator LightWhen Ordering Replace ** with W for White, R for Red, G for Green, Y for Yellow and B for Blue

Code Description PositionM22-WK Spring Return Thumb Grip 2M22-WRK Stayput Thumb Grip 2M22-WK3 Spring Return Thumb Grip 3M22-WRK3 Stay-Put Thumb Grip 3

• With Screw Terminals • Front mounted

When Ordering Replace ** with S for Black, W for White, R for Red, G for Green, Y for Yellow and B for Blue

• IP66, IP69K

• IP66 • Black

Code DescriptionM22-DDL-GR-X1/X0 Green Upper, Red Lower, Text I/OM22-DDL-GR-GB1/GB0 Green Upper, Red Lower, Text Start/StopM22-DDL-WS-X1/XO White Upper, Black Lower, Text I/O

MOELLER - RMQ-Titan® Actuators - Double Pushbutton • Spring Return • IP67


SchneiderTelemecanique-Harmony®XB4MetalRange

Schneider-XB4KeySwitches,withKey-HeadsOnly

Schneider-XB4PilotLights-CompleteBody

Schneider-XB4PilotLights-HeadsOnly

Schneider-XB4PushButtons,SpringReturn-HeadsOnly

• ØD 22mm

• Integral LED

• Plain Lens

• Unmarked, Flush Push

Code DescriptionZB4BG0 3 Position Position - Stay PutZB4BG2 2 Position Position - Stay PutZB4BG3 3 Position Position - Stay PutZB4BG4 2 Position Position - Stay PutZB4BG6 2 Position Position - Spring Return From Right To LeftZB4BG7 3 Position Position - Spring Return To Centre

Code Description ColourZB4BV01 BA 9s Base Fitting WhiteZB4BV013 Integral LED Only WhiteZB4BV03 BA 9s Base Fitting GreenZB4BV033 Integral LED Only GreenZB4BV04 BA 9s Base Fitting RedZB4BV043 Integral LED Only RedZB4BV05 BA 9s Base Fitting YellowZB4BV053 Integral LED Only YellowZB4BV06 BA 9s Base Fitting BlueZB4BV063 Integral LED Only Blue

Code Cap ColourZB4BA1 WhiteZB4BA2 BlackZB4BA3 GreenZB4BA334 White (Marked Position - Arrow)ZB4BA4 RedZB4BA5 YellowZB4BA6 Blue

Code-24V Code-110-120V Code-230-240V ColourZB4BVB1 ZB4BVG1 ZB4BVM1 WhiteZB4BVB3 ZB4BVG3 ZB4BVM3 GreenZB4BVB4 ZB4BVG4 ZB4BVM4 RedZB4BVB5 ZB4BVG5 ZB4BVM5 YellowZB4BVB6 ZB4BVG6 ZB4BVM6 Blue

MOTOR CONTROL GEAR


Schneider-XB4PushButtons,IlluminatedSpringReturn-HeadsOnly

Schneider-XB4SelectorSwitches-HeadsOnly

Schneider-XB5PushButtons,SpringReturn-HeadsOnly

Schneider-XB4SelectorSwitches-IlluminatedwithIntegralLED

SchneiderTelemecanique-Harmony®XB5PlasticRange

• Flush Push • Plain Lens

• Black

• Unmarked, Flush Push

• Green Handle

• ØD 22mm

Code DescriptionZB4BW31* WhiteZB4BW313** White - LED ProtectedZB4BW33* GreenZB4BW333** Green - LED ProtectedZB4BW34* RedZB4BW343** Red - LED ProtectedZB4BW35* YellowZB4BW353** Yellow - LED ProtectedZB4BW36* BlueZB4BW363** Blue - LED ProtectedZB4BZ009 XB4B Contact Block Fixing Base

*Only for use with bodies comprising a light block for a BA 9s base fitting bulb (incandescent, neon or LED)**Only for use with bodies comprising a light block with integral LED

Code - Standard Handle DescriptionZB4BD2 2 Position - Stay PutZB4BD3 3 Position - Stay PutZB4BD4 2 Position - Spring Return From Right To LeftZB4BD5 3 Position - Spring Return To CentreCode - Long Handle DescriptionZB4BJ2 2 Position - Stay PutZB4BJ3 3 Position - Stay PutZB4BJ5 3 Position - Spring Return To Centre

Code DescriptionZB5AA2 Black CapZB5AA3 Green CapZB5AA4 Red Cap

Code DescriptionZB4BK1233 2 Position - Stay Put


Schneider-XB5SelectorSwitches-HeadsOnly

Schneider-XB5ContactBlocks-StandardSingle

Schneider-XB5ContactBlocks-HighPoweredSwitching

Schneider-XB5ContactBlocks-StandardSinglewithBody/FixingCollar

• Standard HandleCode DescriptionZB5AD2 2 Position - Stay PutZB5AD3 3 Position - Stay Put

Code DescriptionZBE101 Contact 1 N/OZBE102 Contact 1 N/C

Code DescriptionZB2BE101 Contact 1 N/OZB2BE102 Contact 1 N/C

Code DescriptionZB5AZ101 Contact 1 N/OZB5AZ102 Contact 1 N/CZB5AZ103 Contact 2 N/OZB5AZ104 Contact 2 N/CZB5AZ105 Contact 1 N/O + 1 N/C

STARTERS

ABB-MS116ManualMotorStarter

Part No. Order Code Setting Range A … AMS116-0.16 1SAM250000R1001 0.10-0.16A MS116-0.25 1SAM250000R1002 0.16-0.25A MS116-0.4 1SAM250000R1003 0.25-0.40A MS116-0.63 1SAM250000R1004 0.40-0.63A MS116-1 1SAM250000R1005 0.63-1.00A MS116-1.6 1SAM250000R1006 1.00-1.60A MS116-2.5 1SAM250000R1007 1.60-2.50A MS116-4 1SAM250000R1008 2.50-4.00A MS116-6.3 1SAM250000R1009 4.00-6.30A MS116-10 1SAM250000R1010 6.30-10.00A MS116-12.0 1SAM250000R1012 8.00-12.00A MS116-16 1SAM250000R1011 10.00-16.00A

• With Thermal and Electromagnetic Protection • Short-circuit & overload protection up to 50kA • ON/OFF Switching functionality • Suitable for three and single phase applications • Ingress Protection: IP20

MOTOR CONTROL GEAR


ABB-MS132ManualMotorStarter

Part No. Order Code Setting Range A … AMS132-0.25 1SAM350000R1002 0.16-0.25AMS132-0.4 1SAM350000R1003 0.25-0.40AMS132-0.63 1SAM350000R1004 0.40-0.63AMS132-1.0 1SAM350000R1005 0.63-1.00AMS132-1.6 1SAM350000R1006 1.00-1.60AMS132-2.5 1SAM350000R1007 1.60-2.50AMS132-4.0 1SAM350000R1008 2.50-4.00AMS132-6.3 1SAM350000R1009 4.00-6.30AMS132-10 1SAM350000R1010 6.30-10.00AMS132-12 1SAM350000R1012 8.00-12.00AMS132-16 1SAM350000R1011 10.00-16.00AMS132-0.16 1SAM350000R1001 0.16AMS132-20 1SAM350000R1013 20.00AMS132-25 1SAM350000R1014 25.00AMS132-32 1SAM350000R1015 32.00A

• With Thermal and Electromagnetic Protection • Short-circuit & overload protection up to 100kA • ON/OFF Switching functionality • Suitable for three and single phase applications • Ingress Protection: IP20 • Clear position of the handle ON/OFF/TRIP

Schneider - Altistart 22 Starters

Schneider-Altistart48Starters

• Soft start/soft stop units • Simple machines • Applications: Pumps, fans, turbines, compressors, conveyors, conveyor belts, lifting screws, escalators, etc. • 3 Phase • Ingress Protection: IP20

• Soft start/soft stop units • Complex/Special Machines • Applications: Pumps, high inertia fans and machines, compressors, conveyors, agitators, mixers, escalators, etc. • 3 Phase • Ingress Protection: IP20

Code Description RatingATS22D32Q Soft Start/Stop Unit - 230-440V 32AATS22D47Q Soft Start/Stop Unit - 230-440V 47AATS22D62Q Soft Start/Stop Unit - 230-440V 62AATS22D75Q Soft Start/Stop Unit - 230-440V 75A

Code Description RatingATS48D32Q Soft Start/Stop Unit 230/415V 32AATS48D47Q Soft Start/Stop Unit 230/415V 47AATS48D62Q Soft Start/Stop Unit 230/415V 62AATS48D75Q Soft Start/Stop Unit 230/415V 75A


Schneider - TeSys LE Enclosed Direct-on-line Starters

Schneider - XCKJ Range of Limit Switches

Schneider-TeSys®LE*GBEnclosedMotorStarters

• Non reversing • Polycarbonate enclosure • Ingress Protection: IP657

• Overload supplied seperately • Composite steel/plastic enclosure • Ingress protection: IP65

Code Description RatingLE1D09U7 Motor Enclosed Starter 240V 50/60Hz 9ALE1D09N7 Motor Enclosed Starter 415V 50/60Hz 9A

Code DescriptionXCKJ161H29 Metal End Plunger, DP NC+NO Snap ActionXCKJ167H29 Steel Roller Plunger, DP NC+NO Snap ActionXCKJ10511H29 Thermoplastc Roller Lever, DP NC+NO Snap ActionXCKJ10541H29 Thermoplastic Roller Lever Variable, DP NC+NO Snap ActionXCKJ50541H29 Thermoplastic Roller Lever Variable, DP NC+NO Slow Break

Direct-On-Line StartersCode Description RatingLE1GBKO55 Without Disconnect Switch 5.5kW 240VLE1GBKS55 With Disconnect Switch 5.5kW 240V

Reversing Direct-On-Line StartersCode Description RatingLE2GBKO55 Without Disconnect Switch 5.5kW 240VLE2GBKO55 With Disconnect Switch 5.5kW 240V

SWITCH DISCONNECTORS/ISOLATORS

SWITCHES - LIMIT SWITCHES

ABB - OT Switch-Disconnectors, Base and DIN-Rail Mounting

Part No. Code Description RatingOT16F3 1SCA104811R1001 3 Pole Switch Disconnector 16AOT16F4N2 1SCA104829R1001 4 Pole Switch Disconnector 16AOT25F3 1SCA104857R1001 3 Pole Switch Disconnector 25AOT25F4N2 1SCA104886R1001 4 Pole Switch Disconnector 25AOT40F3 1SCA104902R1001 3 Pole Switch Disconnector 40AOT40F4N2 1SCA104932R1001 4 Pole Switch Disconnector 40AOT63F3 1SCA105332R1001 3 Pole Switch Disconnector 63AOT63F4N2 1SCA105365R1001 4 Pole Switch Disconnector 63AOT80F3 1SCA105798R1001 3 Pole Switch Disconnector 80AOT80F4N2 1SCA105413R1001 4 Pole Switch Disconnector 80AOT100F3 1SCA105004R1001 3 Pole Switch Disconnector 115AOT100F4N2 1SCA105018R1001 4 Pole Switch Disconnector 115AOT125F3 1SCA105033R1001 3 Pole Switch Disconnector 125AOT125F4N2 1SCA105051R1001 4 Pole Switch Disconnector 125A

• Manual, front operated switch disconnectors • Including protected terminal clamps • Shaft and handle need to be ordered separately • Ingress Protection: IP20

MOTOR CONTROL GEAR


ABB - OT Switch-Disconnectors, with Pistol Handle, Base Mounting

Part No. Code Description RatingOT160EV03P 1SCA120514R1001 3 Pole Switch Disconnector 200AOT160EV04P 1SCA120521R1001 4 Pole Switch Disconnector 200AOT200E03P 1SCA022712R0800 3 Pole Switch Disconnector 200AOT200E04P 1SCA022713R4930 4 Pole Switch Disconnector 200AOT315E03P 1SCA022718R8510 3 Pole Switch Disconnector 315AOT315E04P 1SCA022719R1730 4 Pole Switch Disconnector 315AOT400E03P 1SCA022718R8780 3 Pole Switch Disconnector 400AOT400E04P 1SCA022719R1810 4 Pole Switch Disconnector 400AFull range of accessories available - please call for details

Code Description Poles RatingT0-1-102/E On-Off Switch - Flush 2 20AT0-1-102/EA/SVB Emergency Stop Switch - Flush IP55 2 20AT0-1-102/I1/SVB Emergency Stop Switch - Surface 2 20AT0-1-15431/E Hand/Auto Switch - Flush 1 20AT0-1-15434/E H/A Switch (With Button for Manual) - Flush 1 20AT0-1-8200/E On-Off Switch - Flush 1 20AT0-1-8200/EA/SVB Emergency Stop Switch - Flush IP55 1 20AT0-2-1/I1/SVB Emergency Stop Switch - Surface 3 20AT0-2-8231/E 4 Step Switch - Flush 1 20AT0-2-8900/EA/SVB Switch Disconnector, On-Off - Surface 3 20AT0-2-8900/I1 Switch Disconnector, On-Off - Surface 3+N 20AT0-2-8900/V/SVB Switch Disconnector, On-Off - Rear 3+N 20AT5-2-8211/I5 Change over Switch - Surface 2 100AT5-3-8212/I5 Change over Switch - Surface 3 100AT5-4-8213/I5 Change over Switch - Surface 4 100AT5B-2-8211/I5 Change over Switch - Surface 2 63A

Code Description Poles RatingP1-25/EA/SVB Main Switch For Flush Mounting 3 25AP1-25/I2/SVB Insulated Enclosure 3 25AP1-25/I2H/SVB Main Switch Enclosed 3 25AP1-32/EA/SVB Main Switch for Flush Mounting 3 32AP1-32/I2/SVB Insulated Enclosure 3 32AP1-32/I2H/SVB Main Switch 3 32AP1-32/V/SVB Main Switch - Rear Mounting 3 32AP3-63/EA/SVB Main Switch For Flush Mounting 3 63AP3-63/I4/SVB Insulated Enclosure 3+N 63A/30kWP3-63/V/SVB Main Switch - Rear Mounting 3 63AAuxiliary Contacts HI11/P1/P3E Auxiliary Contacts for P1, P3 Switch Disconnector 1 N/O + 1 N/C HI11/P1/P3Z Auxiliary Contacts for P1, P3 Switch Disconnector 1 N/O + 1 N/C

• Manual, front operated switch disconnectors • Includes a black ON-OFF plastic handle and shaft as standard • The handle is IP65 protected, padlockable in the OFF-position and with door interlock in the ON-position • Adustable shaft for a range of installation depths

• IP65 Unless Otherwise Stated

• IP65 Unless Otherwise Stated

MOELLER - T Range of Rotary Switches

MOELLER - P Range of Switch Disconnectors


Salzer-SwitchDisconnectors-Enclosed

Code Description RatingH216-41300-700N4 3 Pole Switch Disconnector, N-Padlock Device 20A, AC21AH220-41300-700N4 3 Pole Switch Disconnector, N-Padlock Device 25A, AC21AH226-41300-700N4 3 Pole Switch Disconnector, N-Padlock Device 32A, AC21AH216-41400-700N4 4 Pole Switch Disconnector, N-Padlock Device 20A, AC21AH220-41400-700N4 4 Pole Switch Disconnector, N-Padlock Device 25A, AC21AH226-41400-700N4 4 Pole Switch Disconnector, N-Padlock Device 32A, AC21AMany other variations available, please call for details

• Main/Emergency-Off Switch • 20A, 25A & 32A versions available • IP66 Insulated polycarbonate enclosure

• Cover interlock in ON position • Dimensions 125 x 100 x 85mm • Yellow/Red

Schneider-LK3LoadbreakSwitchDisconnectorKits

Schneider - TeSys Vario Switch Disconnectors

• For use in motor or distribution control panels • Kit comprises of: Swith disconnector body Shaft extension Door interlock Power terminal screen Red packlockable handle Escutcheon plate • Ingress protection: IP54 (IP65 for LK31-BC30)

• Main and emergency stop switch disconnector kit for rear mounting and through door operation • For high performance applications • Complete open type assemblies • Operator degree of protection IP65 • 3 Pole • Red handle - packlocable

Code Poles RatingLK3-AP30 3 40ALK3-AP40 4 40ALK3-AR30 3 63ALK3-AT30 3 80A

Code Poles RatingLK3-AR40 4 63ALK3-AT40 4 80ALK31-BC30 3 160A

Code Fixing RatingVCCF 0 4 Screws 25AVCCF 1 4 Screws 32A VCCF 2 4 Screws 40A VCCF3 4 Screws 63AVCCF4 4 Screws 80AVCCF5 4 Screws 125A Long HandleVCCF6 4 Screws 175A Long Handle

Code Fixing RatingVCCD 02 OD 22.5 12AVCCF 02 4 Screws 12A VCCD 01 OD 22.5 20AVCCF 01 4 Screws 20A VCCD 0 OD 22.5 25AVCCD 1 OD 22.5 32AVCCD 2 OD 22.5 40A

MOTOR CONTROL GEAR


TIMERS & RELAYSFinder-40SeriesMiniaturePCB/Plug-InRelays

Finder-46SeriesMiniatureIndustrialRelays

Finder-55SeriesGeneralPurposeRelays

Code Description Rating40.31.7.012.0000 I Pole, 3.5mm Contact Pin Pitch 10A 12V DC40.31.7.024.0000 I Pole, 3.5mm Contact Pin Pitch 10A 24V DC40.31.7.048.0000 I Pole, 3.5mm Contact Pin Pitch 10A 48V DC40.31.8.024.0000 I Pole, 3.5mm Contact Pin Pitch 10A 48V AC40.31.8.110.0000 I Pole, 3.5mm Contact Pin Pitch 10A 110V AC40.31.8.230.0000 I Pole, 3.5mm Contact Pin Pitch 10A 230V AC40.52.7.024.0000 2 Pole, 5mm Contact Pin Pitch 8A 24V DC40.52.7.048.0000 2 Pole, 5mm Contact Pin Pitch 8A 48V DC40.52.8.024.0000 2 Pole, 5mm Contact Pin Pitch 8A 48V AC40.52.8.110.0000 2 Pole, 5mm Contact Pin Pitch 8A 110V AC

Code Description Rating40.52.8.230.0000 2 Pole, 5mm Contact Pin Pitch 8A 230V AC40.61.7.012.0000 1 Pole, 5mm Contact Pin Pitch 16A 12V DC40.61.7.024.0000 1 Pole, 5mm Contact Pin Pitch 16A 24V DC40.61.7.048.0000 1 Pole, 5mm Contact Pin Pitch 16A 48V DC40.61.8.024.0000 1 Pole, 5mm Contact Pin Pitch 16A 24V AC40.61.8.048.0000 1 Pole, 5mm Contact Pin Pitch 16A 48V AC40.61.8.060.0000 1 Pole, 5mm Contact Pin Pitch 16A 60V AC40.61.8.110.0000 1 Pole, 5mm Contact Pin Pitch 16A 110V AC40.61.8.230.0000 1 Pole, 5mm Contact Pin Pitch 16A 230V AC

• DC coils & AC coils • 8mm, 6kV (1.2/50 μs) isolation, coil - contacts • 3.5 or 5 mm pin pitch • For use with 95 Series sockets

• AC coils & DC coils (please call for details) • Available with lockable test button, mechanical flag & LED indicator • Socket mount or direct connection via Faston connectors • 8 mm, 6 kV (1.2/50 μs) isolation, coil-contacts • For use with 97 Series sockets

• 7 - 10 A available • AC & DC coils • PCB or Plug-in mounting • Available with lockable test button, mechanical flag & LED indicator • Plug-in mount, general purpose • 2, 3 & 4 Pole relays • Timer accessories 86 series • Lockable test button and mechanical flag indicator as standard on 2 & 4 pole types • For use with 94 Series sockets

Code Description Rating46.52.8.024.0040 2 Pole, CO Lockable, With Test Button and Mech Indicator 8A 24V AC46.52.8.024.0054 2 Pole, CO Lockable, With Test Button, LED and Mech Indicator 8A 24V AC46.52.8.110.0040 2 Pole, CO Lockable, With Test Button and Mech Indicator 8A 110V AC46.52.8.110.0054 2 Pole, CO Lockable, With Test Button, LED and Mech Indicator 8A 110V AC46.52.8.230.0040 2 Pole, CO Lockable, With Test Button and Mech Indicator 8A 230V AC46.52.8.230.0054 2 Pole, CO Lockable, With Test Button, LED and Mech Indicator 8A 230V AC

Code Description Rating55.34.8.012.0040 4 Pole, Lockable, Test Button and Mech Indicator 7A 12V AC55.34.8.012.0054 4 Pole, Lockable, Test Button, LED and Mech Indicator 7A 12V AC55.34.8.024.0040 4 Pole, Lockable, Test Button and Mech Indicator 7A 24V AC55.34.8.024.0054 4 Pole, Lockable, Test Button, LED and Mech Indicator 7A 24V AC55.34.8.110.0040 4 Pole, Lockable, Test Button and Mech Indicator 7A 110V AC55.34.8.110.0054 4 Pole, Lockable, Test Button, LED and Mech Indicator 7A 110V AC55.34.8.230.0040 4 Pole, Lockable, Test Button and Mech Indicator 7A 230V AC55.34.8.230.0054 4 Pole, Lockable, Test Button, LED and Mech Indicator 7A 230V AC55.34.9.012.0040 4 Pole, Lockable, Test Button and Mech Indicator 7A 12V DC55.34.9.012.0074 4 Pole, Lockable, Test Button, Dbl LED and Mech Indicator 7A 12V DC55.34.9.024.0040 4 Pole, Lockable, Test Button and Mech Indicator 7A 24V DC55.34.9.024.0074 4 Pole, Lockable, Test Button, Dbl LED and Mech Indicator 7A 24V DC55.34.9.048.0040 4 Pole, Lockable, Test Button and Mech Indicator 7A 48V DC55.34.9.110.0040 4 Pole, Lockable, Test Button, LED and Mech Indicator 7A 110V DCFull range of Relays and Sockets available - please call for details


Finder-80SeriesModularTimers16A • 17.5 mm wide • Six time scales from 0.1s to 24h • High input/output isolation • 35 mm rail (EN 60715) mount • New multi-voltage versions with “PWM clever” • Multi-voltage output (24...240 V AC/DC), independent from the input voltage

Code Description Contacts Rating80.01.0.240.0000 Timer - Multi-function and multi-voltage, 1CO 1 C/O (SPDT) 16A 240V AC/DC80.11.0.240.0000 Timer - Multi-voltage, On-delay 1 C/O (SPDT) 16A 240V AC/DC80.21.0.240.0000 Timer - Multi-voltage, Interval, On-Pulse 1 C/O (SPDT) 16A 240V AC/DC80.41.0.240.0000 Timer - Multi-voltage, Off-delay With Control Signal 1 C/O (SPDT) 16A 240V AC/DC80.71.0.240.0000 Timer - Multi-function and Multi-voltage Solid State 1 N/O (SPST-NO) 16A 240V AC/DC80.91.0.240.0000 Timer - Multi-voltage, Asymmetrical Flasher, Recycling ON Start 1 C/O (SPDT) 16A 240V AC/DC

VARIABLE SPEED DRIVES

Schneider-Altivar32VariableSpeedDrives

Schneider-Altivar312VariableSpeedDrives

• Compact: “Book” format • Integrated Safety function compliant to IEC 61508 SIL3 and PL-e • Open: Communication cards available as options • Integrated programmable logic functions • Simple setup • Energy saving : Control of energy efficient permanent magnet synchronous motors

• Open: Large number of communication cards available as options • User-friendly: Simplified interface • Autotuning: Maximum performance

Variable speed drives for open-loop synchronous motors asynchronous motors and for Industrial machines: hoisting, packaging, material handling, material handling, special machines (woodworking machines, metal processing machinery, etc.)

For 3 phase asynchronous motors. For simple industrial machines (material handling and packaging, textile machines, special machines, pumps and fans).

Code Description RatingATV32H055N4 3 Phase Variable Speed Drive 0.55kW 380-500VATV32H075N4 3 Phase Variable Speed Drive 0.75kW 380-500VATV32HU15N4 3 Phase Variable Speed Drive 1.5kW 380-500VATV32HU30N4 3 Phase Variable Speed Drive 3kW 380-500V

Code Description RatingATV312H055N4 3 Phase Variable Speed Drive 0.55kW 500VATV312H075N4 3 Phase Variable Speed Drive 0.75kW 500VATV312HU15N4 3 Phase Variable Speed Drive 1.5kW 500VATV312HU30N4 3 Phase Variable Speed Drive 3kW 550VATV312HU55N4 3 Phase Variable Speed Drive c/w EMC Filter 7.5HP 5.5kW 14.3AATV312HU75N4 3 Phase Variable Speed Drive 7.5kW 500VATV312HD11N4 3 Phase Variable Speed Drive c/w EMC Filter 15HP 11kW 27.7A

ALARMS & SIGNALLING EQUIPMENT - FIRE & INDUSTRIAL AREAS

ALARMS & SIGNALLING EQUIPMENT - HAZARDOUS AREA

EQUIPMENT - INTRINSICALLY SAFE

MEASURING & CONTROL EQUIPMENT

SWITCH MODE POWER SUPPLIES

TRANSFORMERS, DISTRIBUTION UNITS AND ACCESSORIES

SPECIALIST & HAZARDOUSAREA EQUIPMENT

ALARMS & SIGNALLING EQUIPMENT - FIRE & INDUSTRIAL AREAS

E2S - Alarm Sounder & Beacon - AL105N

E2S - LED Traffic Light Visual Signal - B450TLA

The AL105N is a high output, 112dB(A) alarm sounder combined with a 5 Joule Xenon beacon. The robust, fire retardant IP56 housing ensures the AL105N is suitable for all general signalling applications including fire, security and process control.

Features: • Automatic synchronisation on multi-sounder system • Continuously rated • Stainless steel fixings • Unit can be mounted using external lugs or internal BESA compatible fixing positions • Duplicate cable terminations (in & out for daisy-chain installations) • Tropicalisation available on request • Available with custom tone configurations and frequencies • Programmable version available

Technical: • Alarm sounder (A105N) VdS approved to EN54-3 (CPD 89/106/EEC) • UKOOA/PFEER compliant alarm tones • UL approved version available • GOST-R approved • Cert: POCC GB-JB05-B02228

Features: • Available in single E27 filament lamp, dual E14 filament lamp or high output LED array versions • Bayonet fixing lens • Anti-tamper locking screw • Stainless steel fixings • Unit is supplied with a clear prismatic lens to optimise visibility in applications with high ambient light levels

Technical: • Light Output: 24 x LED Array • Function: Permanent • LED Colours: Amber, Green, Red and Yellow • Peak/Effective Intensity Candela: 89cd • Lens Type: Prismatic • Entries: 1 x 5-7mm push through grommet, 2 x M20 cable entry • Dimensions: ø140 x 177mm • Ingress Protection: IP65 • Housing Material: High Impact UL94 VO (f1) PC

Code RatingAL105NDC24[x]/[y] 24V dcAL105NDC48[x]/[y] 48V dcAL105NAC24[x]/[y] 24V acAL105NAC115[x]/[y] 115V acAL105NAC230[x]/[y] 230V ac

[x] = Housing colour: (G) Grey, (R) Red or (W) White[y] = Lens colour: (A) Amber, (B) Blue, (C) Clear, (G) Green, (O) Opal, (R) Red or (Y) YellowSuffix part number with ‘-P’ for programmable, 4 stage, 45 tone versionSuffix part number with ‘-UL’ for UL approved version

Code DescriptionB450TLA030B/* 10-30V dc B450TLA230B/* 90-230V ac 50/60Hz

* = Lens colour: (A) Amber, (G) Green, (R)Red or (Y) Yellow


SPECIALIST & HAZARDOUS AREA EQUIPMENT


ALARMS & SIGNALLING EQUIPMENT - HAZARDOUS AREAE2S - Beacon - BExBG21 Xenon Beacon

E2S - Combined Alarm Sounder and Xenon Strobe Beacon - E2xCS112-5

Features: • Suitable for Zone 1, 2, 21 & 22 applications • Ideal for general signalling duties whilst their robust construction makes installation in the harshest of environments possible • Three distinct user selectable flash patterns and for units with DC operating voltages a second stage flash pattern can be selected remotely • Xenon tubes mechanically secured against shock & vibration

• Additional features include a stainless steel guard and stain less steel mounting bracket as standard • The BEx range features enclosures manufactured from corrosion proof, marine grade copper free LM6 aluminium which is phosphated and powder coated • Glass lens & stainless steel guard • Lens Colours - Amber, Blue, Clear, Green, Red and Yellow

Features: • Very large termination area • Ratchet adjustable stainless steel ‘U’ bracket • Stainless Steel dome guard as standard

• Xenon tube mechanically secured against vibration/shock • User replaceable Xenon tube assembly • Automatic synchronisation on multi-sounder system

ATEX certified for Zone 2 applications and also UL approved for Class I Div 2 applications. Combines a 116dB(A) alarm sounder with a 5 Joule Xenon strobe beacon providing a complete audio-visual signalling solution whilst reducing the installation time and costs associated with multiple unit installations. The E2x range features enclosures manufactured from lightweight, corrosion proof PPS and high impact, fire retardant ABS re-entrant flare horns; both of which are suitable for the harshest of environments.

Technical: • Flash Rate: 1Hz, 2Hz & double strike 1Hz • Peak Candela: 110,780cd • Effective Intensity Candela: 485cd • Voltages DC: 24V dc, 48V dc • Voltages AC: 115V ac, 230V ac • Ingress Protection: IP66 & IP67 • Housing Material: Marine grade copper free LM6 Aluminium • Housing Finish: Phosphated & powder coated finish: anti-corrosion • Colour: RAL3000 Red (others available on request) • ATEX certificate: KEMA 0ATEX2006 / EN 60079-0 : 2006 / EN 60079-1 : 2007 / EN 61241-0 : 2006 / EN 61241-1 : 2004 • IECEx certificate: IECEx KEM 10.0002 / IEC 60079-0 : 2004 (Ed4) / IEC 60079-1 : 2007 (Ed6) / IEC 61241-0 : 2004 (Ed1) / IEC 61241-1 : 2004 (Ed1) • Inmetro certificate: 10-IEx-0010

Technical: • ATEX Certificate: DEMKO 06 ATEX 0421554 / EN 50021: 1999 • UL File ref: E230764 • ATEX Version Classification: II 3G EEx nA nL IIC T2 (Tamb -20°C to +55°C) II 3G EEx nA nL IIC T3 (Tamb -20°C to +40°C) • UL Version Classification: Class I, Div 2, Grps A,B,C,D T2D (215°C) at +55°C • ATEX version: Class I, Div 2, Grps A,B,C,D T3 (200°C) at +40°C / Class II, Div 2, Grps F & G T6 (85°C) at +40°C / Class II, Div 2, Grps F & G T5 (85°C) at +55°C / Class III, Div 1, T6 (85°C) at +40°C / Class III, Div 1, T5 (100°C) at +55°C

Code DescriptionBExBG21D** Xenon Beacon

** = Voltage & lens colour reference: Voltage options: 12Vdc, 48Vdc, 115Vac, 230VacLens colour options: (A) Amber, (B) Blue, (C) Clear, (G) Green, (R) Red or (Y) Yellow

Code DescriptionE2xCS1125EG** ATEX VersionE2xCS1125UL** UL Version

** = Voltage & lens colour reference: Voltage options: 12DC, 24DC, 48DC, 115AC, 230ACLens colour options: (A) Amber, (B) Blue, (C) Clear, (G) Green, (O) Opal, (R) Red or (Y) Yellow


EQUIPMENT - INTRINSICALLY SAFE

CorDEX - Camera - ToughPIX 2300XP Series

CorDEX - Laser - LaserMETER XP Series

Intrinsically Safe ATEX and CSA certified digital cameras, designed for still image and video (AVI) capture within potentially hazardous (explosive) environments.

The LaserMETER 3000XP series of explosion-proof laser distance meter is ATEX & IECEx certified for use within Zone 1 IIC T4, and CSA Certified for Class I, Div.1 B,C,D hazardous (explosive) areas. The robust IP65 design incorporates shock resistant, anti-static outer casing, interchangeable battery pack and back lit LCD display.

Features: • Capable of measuring distances of up to 30 m (100ft) • Accurate to 3 mm (0.1 in.) (depending on target reflectivity and ambient conditions) • Single or continuous measurement • Addition and subtraction

• Pythagoras, area, and volume calculations • ATEX and IECEx certified for use within Mining (M2) and Zone 1 IIC T4 Explosive areas (vapor) atmospheres • Clear backlit armoured LCD display for day or night operation • Removable/rechargeable battery pack for continued operation

Features: • ATEX and CSA certified for petrochemical and Mining environments • Large and easy access controls for when wearing PPE and protective gloves • 5 megapixel sensor array • Rugged, industrial grade design with backlit armoured 2.4”LCD screen • Removable/rechargeable battery • Movie capture capability (AVI) • High intensity strobe flash, for low light image capture

Technical: • ATEX/IECEx Certificate type: I/II M2/2 G Ex d I/IIC T4 • ATEX Certificate No: Sira 10ATEX1283X • IECEx Certificate No: IECEx SIR 10.0133X • Ambient temperature range: -20°C to +50°C • Measuring range : 0.5m to 30m (1.6 to 100ft) • Measuring accuracy: 3mm (0.1in) • Laser type: 635nm, <1mW • Laser class: Class II • Acc: IEC 60825-1:2001 • Body/Lens and LCD: Cast aluminium chassis with anti-static over-mould/ toughened safety glass • Emitted Wavelength: 620-690mm • Protection Rating: IP65 • Functions: Pythagoras, volume, area

Code DescriptionToughPIX 2301XP ATEX Certified Zone 1 (Ex d IIC T4 Gb)ToughPIX 2302XP ATEX Certified Explosive Atmospheres(I M2 / Ex d I Mb)ToughPIX 2303XP ATEX Certified Petrochem and Mining (Ex d I Mb/Ex d IIC T4 Gb) ToughPIX 2304XP CSA Certified (Class I, Div.1 Groups B, C, D, Ex d I Mb/Ex d IIC T4 Gb) Full range of accessories available - please call for details

Code DescriptionLaserMETER 3000XP ATEX and IECEx Certified Explosion-proof Laser Distance Meter



CorDEX - Thickness Gauge - UT5000 Ultrasonic

Ecom Instruments - Lamp - SHL 350-Ex

The CorDEX Instruments Intrinsically Safe Thickness Gauge with CorDEX CONNECT™ measures metal thickness for Non-Destructive Testing (NDT) and Predictive Maintenance (PDM) on pipelines and fixed equipment within hazardous locations.

A robust handlamp with LED Image technology that is designed for industrial and firefighting applications in potentially explosive areas in zone 0 and 1, or 20 and 21 in accordance with directive 1999/92/EC (ATEX 137). The ergonomic design allows users to operate all the features of the lamp with a single hand.

Features: • Certified for Zone 1 IIC T4 hazardous areas • Echo-Echo Technology for reading through painted surfaces • Features CorDEX CONNECT™ Software

• Full colour, backlit, multifunction display • Stores up to 1000 measurements

Features: • Zone 0 / 20 Certified • Approximately 10,000 lx at a distance of 1 m provided by 3 i.safe LED’s • Can be used at a brightness level of 25%, 50%, 75% or 100% with the click of a button

• Flashing mode • Intrinsically safe LED service life of approx. 50,000 hours • Rugged, anti-static polyamide housing with IP65 rating • Emergency lighting capabilities • Pivoting lamp head

Code DescriptionUT5000 Thickness guage Tested for Zone 1 IIC T4

Code Article No. DescriptionSHL 350-Ex AS002160 Hand Lamp LG-300 HVC AS002006 Charging Base - AC (110 V - 240 V)

Technical: • Certification: ATEX & IECEx Certified for Zone 1 IIC T4 hazardous areas • Screen : 3.1” RGB TFT colour screen with backlight, Right/Left handed set up • Material velocity selection: Pre-loaded Drop-down menu, or user definded. • Transducer: Dual Element • Pulse rate: Standard transmit pulse rate of 4Hz / Adjustable from single shot up to 10Hz • Receiver Bandwidth: 1MHz to 15MHz (-3dB points) • Frequency: 4MHz, 3mm up to 100mm • Accuracy: +/- 0.05mm • RFID tag reader: Operate with 13.54MHz passive tags / Detection range up to 5cm / Supports ISO/IEC 15693-2, ISO/IEC 18000-3 tag formats • Battery details: Lithium thionyl chloride primary 3.6V cell /100 Hours continuous operation with back light restrictions / Low battery warning • Operating temperature: -10 to +50C

Technical: • ATEX Approvals: II 1G Ex ia op is IIC T4 Ga / II 1D Ex ia IIIC T130°C Da • Ambient temperature: -20 °C … +50 °C (-4 °F … +122 °F) • Storage temperature: -30 °C … +60 °C (-22 °F … +140 °F) • Operating time: Approx. 6 hours • Light source: 3 high performance LEDs: 10,000 lux (at a distance of one meter) • Luminous flux (approx.): 211 Lumen • Solvent resistance: Acetone • ESD-protection: Anti-static housing • CE designation: CE0102 • Power supply: Ecom-Ex battery pack • Protection rating: IP65


Ecom Instruments - Mobile Phone - Ex-Handy 07

Ecom Instruments - Torch - Lite-Ex® PL 10

Intrinsically safe Zone 1 & 21 mobile phone. The phone also comes with an intrinsically safe camera option. Three-year No Questions Asked warranty.

The PL 10 is an ATEX certified Zone 0/20 LED safety light which makes it perfect for hazardous area inspection and is compact enough to fit into your pocket whilst providing as much light as larger intrinsically safe flashlights.

Features: • 2 megapixel ATEX certified camera with flash (optional) • Bluetooth® 2.1 (DUN, OPP, SPP, HSP, HFP, FTP, A2DP, AVRCP, PBAP) • MMS function included • Native e-mail client (POP3/SMTP, IMAP4) • WAP 2.0 (XHTML) and Opera Mini Browser • Java™ 2.0 ME (CLDC 1.1) • Integrated Office functionality

• Contact and calendar synchronisation with MS® Outlook® • Free software for data transfer and synchronisation • A-GPS • Bright LED torch • Micro SD cards up to 16 GB • Scratch and impact-resistant Gorilla glass screen • Vibration alert

Features: • Zone 0 / 20 ATEX certified • Ultra light and compact; Weight just 120 g including battries • Simple to use • High performance LED • Operating time: 55 hours (approx.)

• Ring switch on/off • Scratch resistant: Coated protective disc • Rugged polyamide housing • Removable belt-clip • Pressure control valve

Code Article No. DescriptionEx-Handy 07 AS000736 Mobile Phone Full range of accessories available - please call for details

Code Article No. DescriptionLite-Ex PL 10 AS002050 Torch

Technical: • Approvals: II 2G Ex ib IIC T4 Gb IP54 / II 2D Ex ib IIIB T130°C Db IP5x • Network type: Triband • Networks: GSM 850/1800/1900 MHz / GSM 900/1800/1900 MHz • Data transmission: GPRS & EDGE class 12 • Talk time: Max. 4.5 hrs (with battery SC) / Max. 7 hrs (with battery HC) • Stand-by: Max. 250 hrs (with battery SC) / Max. 400 hrs (with battery HC) • Display: LCD with 5 cm (2 inches) (resolution: 240 x 320 Pixel) • Ambient temperature: -20 °C … +55 °C (-4 °F … +131 °F) • Protection rating: IP68 • Operating temperature: -10 to +50C

Technical: • ATEX Approvals: II 1G Ex ia op is IIC T4 Ga / II 1D Ex ia IIIC T130°C Da • Light source: High performance LED: 3,000 lx at a distance of 1 m • ESD-protection: Anti-static housing • CE designation: CE0102 • Ambient temperature: -20 °C … +50 °C (-4 °F … +122 °F) • Storage temperature: -30 °C … +60 °C (-22 °F … +140 °F) • Operating time: Approx. 55 hours • Power supply: 3x LR03 according to IEC, AAA (type-approved) • Protection rating: IP65, IP67



Technical: • Relays: 5 • Transducers: Compatible with all dB transducers • Flow transducer: dBMACH3 • I.S. Tranducer option (EEX ia): Up to db15 • Mounting options: Wall, fascia, pane, 19”” rack • Volumetric conversion: 12 tank shapes • Alarm functions • Pump control functions • Advanced Pump Functions • Data Logs


Technical: • Dimensions: 220mm x 112mm x 108mm • Material (Case): Stainless steel and polycrbonate, flame resistant to UL94-V0 • Protection (Fascia Mount): IP64 • Temperature Range: -20°C to +50°C • Flammable atmosphere use: Used in conjunciton with the dB series of transducers, available for use in hazardous areas • Approvals: BS EN 50081-1:1992, BS EN50082-2:1995, BS EN61010-1:1993 • Performance: 0.25% of the measured range or 6mm (whichever is greater) • Accuracy: 0.1% of the mesaured range or 2mm (whichever is greater) • Resolution: 3m (dB3 transducer), 6m (dB6), 10m (dB10), 15m (dB15), 25m (dB25), 40m (dB40), 50m (dB50)

MEASURING & CONTROL EQUIPMENT

Pulsar - Level Controller - Ultra 5

Pulsar - Pump Station Controller - Zenith 140

Ultra 5 offers the ultimate flexibility in ultrasonic control and measurement, combining several instruments into one. The Ultra 5 is user-configurable to measure level or volume, provide advanced pump control or measure open channel flow to BS ISO 1438 and 4359. It gives you the ultimate flexibility of five assignable relays with extra alarm options such as pump efficiency, extra pump control functions including pump run-on and pump exercising; storm and aeration control, differential control using two transducers and the addition of further relays in OCM applications.

The Pulsar Zenith Intelligent Pump Controller is a high specification pumping station management system, offering unrivalled performance. Using Pulsar’s proven non-contacting ultrasonic technology it provides almost all known pumping and tariff management routines in an easy to use package. By combining advanced ultrasonic level measurement and the monitoring of pumps utilising digital inputs.

Features: • Solids or liquids level measurement • Linearisation for tank shapes • Advanced pump control choices • Pump efficiency alarm

• Optional 4-20mA input • Wide choice of flumes and weirs in OCF • Easy prompt set up • DATEM software

Features: • Advanced Pump control features as standard • Reduce capital costs by eliminating PLC on small sites • Reduce panel depth and size • Reduce power costs by intelligent use of lower tariff periods for pumping

• Monitoring of pumps or controls via the 7 digital inputs • Easy prompt led menu system with clear back lit display • RS232 with RS485 Modbus or Profibus DP V0/V1 options • Totalised volume throughput of well or station • Small panel footprint and only 90mm inside projection


Technical: • Range: 0.3 to 15 m (1 to 50 ft) • Compatible transducers: XRS-5, ST-H, XPS-10, XPS-15, XCT-8, XCT-12 • Output: Six relays standard Two 4 to 20 mA outputs (isolated) One or three relays optional, single channel level reading only • Material (Enclosure): Polycarbonate • Degree of protection (enclosure): Wall mount IP65/Type 4X/NEMA 4X Panel mount IP54/Type 3/NEMA 3 • Installation category: II • Pollution degree: 4 • Temperature Range: (Enclosure) -20 to +50 °C

• Accuracy: 0.25 % of range or 6 mm (0.24 inch), whichever is greater • Resolution: 0.1 % of measuring range or 2 mm (0.08 inch), whichever is greater • Certification: - CE, C-TICK5) - Lloyd’s Register of Shipping - ABS Type Approval - FM, CSAUS/C, UL listed - CSAUS/C Class I, Div. 2, Groups A, B, C and D, Class II, Div. 2, Groups F and G, Class III (wall mount only) - MCERTS Class 1 approved for Open Channel Flow

Features: • Non contact ultrasonic transducers • Compact, low power transducer design that can be I.S. certified and uses standard interconnecting cables • Produces extremely high acoustic power to give exceptional results in a wide variety of challenging situations • Flammable atmosphere approval as standard • Flanges are available on most transducers with PTFE facing for corrosive applications, in ANSI or DIN patterns

Features: • Monitors wet wells, weirs and flumes • Digital communications with built-in Modbus RTU via RS-485 • Compatible with SmartLinx system and SIMATIC PDM configuration software • Single or dual point level monitoring • 6 relay (standard), 1 or 3 relay (optional) • Auto False-Echo Suppression for fixed obstruction avoidance • Anti-grease ring / tide mark buildup • Differential amplifier transceiver for common mode noise rejection and improved signal-to-noise ratio • Wall and panel mounting options

Pulsar - DB Transducers

Siemens - Level Controller - HydroRanger 200 UltrasonicHydroRanger® 200 is an economical, low-maintenance ultrasonic level measurement solution delivering control efficiency and productivity that meets today’s strict environmental meets today’s strict environmental legislations.

This controller is ideal for simple level measurement and pump control or for more advanced applications such as differential level, open channel measurement, and advanced pump control and alarming.

Key applications are wet wells, flumes/weirs, bar screen control.

Code Description Range Beam AngledB3 Short Range Solids and Liquids Measurement 125mm - 3m, 125kHz, 19mm Diameter Radiating Face <10ºdB6 Short Range Solids and Liquids Measurement 300mm - 6m, 75kHz, 30mm Diameter Radiating Face <10º



Technical: • Output: Ultrasonic transducer 44 kHz Relays 5 alarm/control relays, 1 SPDT Form C per relay, rated 5 A at 250 V AC, resistive load mA output 0/4 ... 20 mA, optically isolated • Max. load 1 kΩ • Error in measurement: 0.25 % of range or 6 mm (0.24 inch), whichever is greater

• Resolution: 0.1 % of measuring range or 2 mm (0.08 inch), whichever is greater • Resolution 0.1 % of 20 mA • Temperature Range: (Enclosure) -20 to +50 °C • Material: (Enclosure) Polyester/polycarbonate alloy • Degree of protection: (Wall mount) IP65/NEMA 4X/Type 4X • Certification: CE2), FM, CSAUS/C, C-TICK

Technical: • Range: 0.3 to 15 m (1 to 50 ft) • Compatible transducers: XRS-5, ST-H, XPS-10, XPS-15, XCT-8, XCT-12 • Output: - Five relays, 5A at 250 V AC, noninductive - Wall mount version: 4 form A (SPST) relays, 1 form C (SPDT) relay - Rack and panel mount version: 4 form A (SPST) relays, 1 form B (SPST) relay

• Error in measurement: 0.25 % of range or 6 mm (0.24 inch), whichever is greater • Resolution: 0.1 % of measuring range or 2 mm (0.08 inch), whichever is greater • Temperature Range: (enclosure) -20 to +50°C • Certification: CE, FM, CSA

Features: • Outputs for alarms, chart recorders, controllers and integration of existing systems • Monitors wet wells, weirs and flumes • Energy-saving function with built-in real-time clock • Special control mode to reduce grease rings and other deposits • Integral temperature compensation • Pump performance monitoring • System monitoring and network analysis

Features: • Monitoring and control in one device • Integral telemetry interface (Modbus RTU/ASCII) • Patented algorithm for calculation of pumped volume within 5% accuracy • Logging of pump runtime and number of pump starts • Expandable with I/Os, RAM for data logging, dual point, SmartLinx communications and RS-485 interface • Simple system configuration and diagnostics with Siemens Milltronics Dolphin Plus Windows®-based software • AC or DC power supply • Available for rack mount, panel mount or wall mount

Simens - Level Controller - Hydroranger Plus Ultrasonic

Siemens - Level Controller - Sitrans LUC500 Ultrasonic

HydroRanger Plus is an ultrasonic level controller for control of wet wells and reservoir pump operations, differential control and open channel flow monitoring, using energy-saving algorithms. The system is effective in wet wells, weirs, and flumes where foam and turbulence are typical operating conditions. It can be customized to meet your specific application needs – from measuring flow rate in a narrow flume to volume in a ferric chloride storage bank. The system consists of the electronics housed in a wall-mounted enclosure and a hermetically sealed, corrosion-resistant Echomax® transducer. These components can be separated by up to 365 m (1200 ft). Optional submergence shields ensure consistent operation in wet wells where the transducer may be submerged during flooding from rainfall or a power outage. Siemens patented detection software can differentiate between a submerged condition and a high level. Key Applications: wet wells, weirs, flumes.

SITRANS LUC500 is a complete ultrasonic level controller for monitoring and control of water distribution and wastewater collection systems, with energy-saving algorithms. It combines non-contacting ultrasonic technology, patented echo-processing techniques and proven application software to provide accurate level monitoring in liquids up to 15 m (50 ft). It also effectively monitors flow in flumes, weirs and open channels. The basic device has 8 digital inputs, 5 digital outputs, 1 analog input, 1 ultrasonic level point, differential/average capability and one RS-232 interface with Modbus® RTU/ASCII protocol. It integrates seamlessly with SCADA or DCS systems or a PLC system to provide remote access to all system parameters (pumped volume, pump runtime, pump status). The integral telemetry interface (Modbus RTU/ASCII) allows remote control in real time. Key Applications: wet well/lift station control, weirs/flumes, open channels.

Full range of transducers and accessories available - please call for details


SWITCH MODE POWER SUPPLIES

• Switched Mode, Class II Single Output • Range of DIN rail mounted switched mode power supplies from 15W to 100W • Designed to isolation Class II with no provision for earth • Approved to UL,CUL,TUV,CB and are CE marked • Universal inputs of 85~264V AC 1ph in 15W,30W,60W and 100W • Protected against overload, short circuit, over voltage and over temperature and have an LED ‘power on’ indicator • DC output adjuster to provide +10% of rated output voltage • 3 years warranty • Ambient temperature range from 0 to 45ºC

• Available in single-phase and three-phase versions from 70 to 1000 W • Parallel connections allow simple power increase for up to five units without diode module • DIN-rail mountable without any gap (no clearance necessary) • Power boost of 120 percent enables inductive and capacitive loads; additional starting capacity

• Autoselect input for wide input range without any switch; for DC and AC voltages • Slim housings for space saving installation in the cabinet • Compact dimensions, 3A just 33mm wide, 5A just 40mm wide • No clearance required for side-by side mounting

Technical: • Operating temperature range of -25°C to +70°C • MTBF > 500,000 hours • Wide-range input voltage 85…264VAC.

• High hold-up time: >20ms @ 230VAC. • Output voltage 22.5…29.5VDC.

Weidmüller’s new PRO-M series switchmode power supplies offer a host of advantages. The 24 VDC PRO-M power supplies all feature a solid ultra-slim metal housing, and are designed to mount on a DIN-rail with no ventilation gap required between multiple units. This feature provides up to a 50 percent savings in space and allows the PRO-M to fit into the tightest spaces in control cabinets or machines.

• Switched Mode • Range of DIN rail mounted switched mode power supplies from 75W to 960W • Fully approved to UL,CUL,TUV,CB and are CE marked • Universal inputs of 85~264V AC 1ph in 75W,240W, the 120W range is from 88~264V AC 1ph selected by a switch and the 480W units have inputs of either 180~264V AC 1pH or 90~264V AC 1ph • Three phase units are available in 240W,480W and 960W with an input range of 340~550V AC 3ph • The DRH-120 is a 2 wire 340~550V AC 1ph input for low power applications • Protected against overload, short circuit, over voltage, over temperature and have an LED ‘power on’ indicator • DC output adjuster to provide +10% of rated output voltage • 3 years warranty • Ambient temperature range from 0 to 45Cº

ETE - Din Rail Mounted Power Supplies - Class II

Weidmuller - PRO-M Power Supply Units

ETE - Din Rail Mounted Power Supplies

Code Watt Input Output Dims (W x D x H) (mm) DR-30-12 30 Universal Ac 1Ph Input 85~264V 47~63Hz Or 120~370V DC 12V DC 78 x 56 x 93DR-60-24 60 Universal Ac 1Ph Input 85~264V 47~63Hz Or 120~370V DC 24V DC 78 x 56 x 93

Code Description Dims (L x H x W x D) (mm)8951330000 Switch Mode Power Supply Unit CP M SNT 70W 24V 3A 125 x 130 x 33 x 1258951340000 Switch Mode Power Supply Unit CP M SNT 120W 24V 5A 125 x 130 x 40 x 1258951360000 Switch Mode Power Supply Unit CP M SNT 250W 24V 10A 150 x 130 x 60 x 150

Code Watt Input Output Dims (W x D x H) (mm) DR-75-24 75 Universal Ac 1Ph Input 85~264V 47~63Hz Or 120~370V DC 24V DC 55.5 x 100 x 125.2DR-120-24 120 Universal Ac 1Ph Input 85~264V 47~63Hz Or 120~370V DC 24V DC 65.5 x 100 x 125.2DRP-240 -24 240 Universal Ac 1Ph Input 85~264V 47~63Hz Or 120~370V DC 24V DC 125.5 x 100 x 125.2DRH-120-24 120 Universal Ac 2Ph Input 340~550V 47~63Hz Or 480~780V DC 24V DC 65 x 100 x 125.2DRH-120-48 120 Universal Ac 2Ph Input 340~550V 47~63Hz Or 480~780V DC 48V DC 65 x 100 x 125.2Bespoke power supply units available on request - please call for details


Supplied with cable and plug

An innovative, portable distribution unit for site and industrial use. Packed with useful features that give clear advantages over traditional steel splitters • 4 Visible power indicators • Tough casing • Integrated handle for lifting & shifting • Cable tidy with securing strap • Interlocking with stackable handle

• Designed for use in harsh environments • Low temperature cable (-30°C to +70°C) • Colour - Yellow

• 230~240V 50Hz input via 2m cable and 13 Amp UK plug • 110V output centre tapped to earth (55/0/55V) • To EN 61558-1: 2005 - CE marked • Full overload MCB protection • Output sockets to BS 4343: IP44 • High impact polyester/glass enclosures 1-5KVA

• Designed to EN 61558-1 : Class E insulation • High specification with IP20 touch proof terminals • Class F varnish impregnation • Core earth terminal • Ambient temperature range -10 deg C to + 35 deg C

Distribution Units - 110V

Distribution Units - 110V Spider Ball

Extension Leads - 110V

ETE - Transformers - Portable Tool Transformers

ETE - Transformers - Single Phase Multi & Single Voltage

TRANSFORMERS, DISTRIBUTION UNITS AND ACCESSORIES

Code DescriptionE13104 Steel Case, 4 Way 16A Outlets E13111 Fibreglass Case, 2 Way 32A OutletsE13108 Fibreglass Case, 4 Way, 2 x 32A & 2 x 16A Outlets

Code DescriptionE13200 4 Way - Recessed 16A Outlets

Code DescriptionE85118 Lead 10mtr x 1.5mm x 16AE85235 Lead 14mtr x 2.5mm x 32A

Code Rating Connection WeightPT1000/2 1.0kVA 2M Cable - 13A Plug 11kgPT1500/2 1.5kVA 2M Cable - 13A Plug 11kgPT3300/2 3.3kVA 2M Cable - 13A Plug 17kgPT5000/3 5.0kVA 2M Cable - 13A Plug 29KG

Code - Single Voltage Input Output (L x W x H) (mm)SV50P4S6 240V 50/60Hz 24V 75 x 65 x 88SV50P5S6 415V 50/60Hz 24V 75 x 65 x 88SV100P4S6 240V 50/60Hz 24V 85 x 70 x 93SV300P4S6 240V 50/60Hz 24V 120 x 100 x 120


Code - Dimensions Multi Voltage Input Output (L x W x H) (mm)MV 50P2S1 20/0/380/420V 50/60Hz 55/0/55V (0/55/110V) 75 x 65 x 88MV 100P1S1 10/0/220/240V 50/60Hz 55/0/55V (0/55/110V) 85 x 70 x 93MV 100P2S1 20/0/380/420V 50/60Hz 55/0/55V (0/55/110V) 85 x 70 x 93MV 200P1S1 10/0/220/240V 50/60Hz 55/0/55V (0/55/110V) 96 x 87 x 103MV 200P2S1 20/0/380/420V 50/60Hz 55/0/55V (0/55/110V) 96 x 87 x 103 MV 1000P2S1 20/0/380/420V 50/60Hz 55/0/55V (0/55/110V) 150 x 125 x 145

CONSUMER UNITS & ANCILLARIES

DISTRIBUTION BOARDS &ANCILLARIES

PANEL BOARDS

SWITCHES - HAZARDOUS AREA

SWITCHGEAR & DISTRIBUTION



Split Load Dual RCDCode Order Code Modules Isolator Rating RCD x 2HMSL552C 1SPE007712F0416 5 + 5 100A 63A/30mAHMSL772C 1SPE007712F0516 7 + 7 100A 63A/30mA

ABB - Housemaster 17th Edition Moulded Enclosure • To BS EN 60439-3 • Colour RAL9010 Moulded • Supplied Unpopulated

CONSUMER UNITS & ANCILLARIES

ABB - Housemaster Moulded Enclosure

Code Order Code Modules Incomer Isolator RCDHMMS4C 1SPE007712F0111 4 100A -HMMS6C 1SPE007712F0211 6 100A -HMMS10C 1SPE007712F0311 10 100A -HMMS14C 1SPE007712F0411 14 100A -HMMS18C 1SPE007712F0511 18 100A -HMRC4C 1SPE007712F0112 4 - 80A/30mAHMRC6C 1SPE007712F0212 6 - 100A/30mAHMRC10C 1SPE007712F0312 10 - 100A/30mAHMRC14C 1SPE007712F0412 14 - 100A/30mAHMRC18C 1SPE007712F0512 18 - 100A/30mA

Moulded Enclosure to BS EN 60439-3 • Supplied factory fitted with switch disconnector and/or RCD. Unit comes complete with 4 blanking plates, shrouded busbar, terminal bars and installation instructions • Colour RAL9010 Moulded • Adaptable split load and 17th Edition Versions

ABB - Housemaster Split Load EnclosureInsulated Split Load Dual RCDCode Order Code Modules Isolator Rating RCDHMSL4+4C 1SPE007712F0313 4+4 100A 80A/30mAHMSL6+6C 1SPE007712F0413 6+6 100A 80A/30mAHMSL8+8C 1SPE007712F0513 8+8 100A 80A/30mA

Metal Split Load Dual RCDCode Order Code Modules Isolator Rating RCDHSSL4+4C 1SKB113142C8001 4+4 100A 80A/30mAHSSL6+6C 1SKB118142C8001 6+6 100A 80A/30mAHSSL8+8C 1SKB122142C8001 8+8 100A 80A/30mA


ABB - Housemaster MCB Type B & C

Code Order Code Type B Order Code Type C RatingS201•6 2CDS251001R0065 2CDS251001R0064 6A 6kAS201•10 2CDS251001R0105 2CDS251001R0104 10A 6kAS201•16 2CDS251001R1165 2CDS251001R0164 16A 6kAS201•20 2CDS251001R0205 2CDS251001R0204 20A 6kAS201•25 2CDS251001R0255 2CDS251001R0254 25A 6kAS201•32 2CDS251001R0325 2CDS251001R0324 32A 6kAS201•40 2CDS251001R0405 2CDS251001R0404 40A 6kAS201•50 2CDS251001R0505 2CDS251001R0504 50A 6kAS201•63 2CDS251001R0635 2CDS251001R0634 63A 6kA•AddtrippingcurveforB or C eg: S201B6Type B - Suitable for small inrush or switching surges, heating loads and tungsten lightingType C - Suitable for moderate switching surges for sort duration. eg. discharge lamps

• S200 Series • BS EN 60898 6kA • Single Pole

ABB - Housemaster RCBO Type B & C

Type BCode Order Code Type B RatingDS271AC-B6/0.03 2CSR175092R1065 6A 30mADS271AC-B10/0.03 2CSR175092R1105 10A 30mADS271AC-B16/0.03 2CSR175092R1165 16A 30mADS271AC-B20/0.03 2CSR175092R1205 20A 30mADS271AC-B25/0.03 2CSR175092R1255 25A 30mADS271AC-B32/0.03 2CSR175092R1325 32A 30mAType CCode Order Code Type C RatingDS271AC-C6/0.03 2CSR175092R1064 6A 30mADS271AC-C10/0.03 2CSR175092R1104 10A 30mADS271AC-C16/0.03 2CSR175092R1164 16A 30mADS271AC-C20/0.03 2CSR175092R1204 20A 30mADS271AC-C25/0.03 2CSR175092R1254 25A 30mADS271AC-C32/0.03 2CSR175092R1324 32A 30mADS271AC-C40/0.03 2CSR175092R1404 40A 30mASupplied with 800mm flying Neutral Lead

• Single Pole • Soild Neutral to BS EN 61009

ABB - Housemaster Steel Enclosure

Code Order Code Modules Incomer Isolator RCDHSMS4C 1SKB106142C4001 4 100A -HSMS7C 1SKB109142C4001 7 100A -HSMS11C 1SKB113142C4001 11 100A -HSMS16C 1SKB118142C4001 16 100A -HSMS20C 1SKB122142C4001 20 100A -HSRC4C 1SKB106142C6001 4 - 80A/30mAHSRC7C 1SKB109142C6001 7 - 100A/30mAHSRC11C 1SKB113142C6001 11 - 100A/30mAHSRC16C 1SKB118142C6001 16 - 100A/30mAHSRC20C 1SKB122142C6001 20 - 100A/30mA

• BS EN 60439-3 • Supplied factory fitted with switch disconnector and/or RCD. Unit comes complete with shrouded busbar, earth and neutral bars and installation instructions • Colour RAL7035 Steel • Adaptablesplitloadversions



Hager - Garage Units

Code Description DimensionsVE24H 2 Way 40A RCCB IP55 110 x 180 x 82mm GD24H 2 Way 40A RCCB IP30 168 x 193 x 113mm

• The range of garage units comply with BS EN 60439-3 • Annex2AandareavailableasIP30andIP55 • They come pre-configured for one power (32A) and one lighting (6A) circuit

Hager - RCCB Incomer Enclosure - Insulated

Code - Plain Code - Glazed Modules RCCB VC402H VC402HG 2 40A 30mAVC403H VC403HG 3 63A 30mAVC404H VC404HG 4 63A 30mAVC406H VC406HG 6 63A 30mAVC408H VC408HG 8 63A 30mAVC304H VC304HG 4 100A 30mAVC308H VC308HG 8 100A 30mAVC314H VC314HG 14 100A 30mA

• Insulated, RCCB incomer enclosures, 1 row from 1 to 18 outgoing ways • Surface mounted enclosures, with a rigid chassis, housing a 40, 63 or 100A RCCB • Complies with BS EN 60439-3 Annex 2A

Hager - RCCB Incomer Enclosure - Metal

Code - Plain Code - Glazed Modules RCCB VH404H VH404HG 4 63A 30mAVH406H VH406HG 6 63A 30mAVH408H VH408HG 8 63A 30mAVH304H VH304HG 4 100A 30mAVH306H VH306HG 6 100A 30mAVH308H VH308HG 8 100A 30mAVH314H VH314HG 14 100A 30mAVH318H VH318HG 18 100A 30mA

• Metal, RCCB incomer enclosures, 1 row from 1 to 18 outgoing ways • Surface mounted enclosures, with a rigid chassis, housing a 40, 63 or 100A RCCB • Complies with BS EN 60439-3 Annex 2A

Hager - RCCB Incomer Enclosure Split Load - Insulated

Code - Plain Code - Glazed Description SizeVC733H1 VC733H1G 6 Way Split Load 3+3 2 x 63A 30mA RCCBVC755H1 VC755H1G 10 Way Split Load 5+5 2 x 63A 30mA RCCBVC710C1 VC710C1G 10 Way Split Load Configurable 2 x 63A 30mA RCCBVC766H1 VC766H1G 12 Way Split Load 6+6 2 x 63A 30mA RCCBVC712C1 VC712C1G 12 Way Split Load Configurable 2 x 63A 30mA RCCBVC714C1 VC714C1G 14 Way Split Load Configurable 2 x 63A 30mA RCCBVC716C1 VC716C1G 16 Way Split Load Configurable 2 x 63A 30mA RCCBVC855H - 10 Way Split Load 5+5 2 x 80A 30mA RCCBVC866H - 12 Way Split Load 6+6 2 x 80A 30mA RCCBVC816C - 16 Way Split Load Configurable 2 x 80A 30mA RCCB

• Insulated, split load and configurable enclosures, 1 row from 10 to 16 modules • Surface and flush mounted enclosures, with a rigid chassis, housing a Switch Disconnector and RCCB • Complies with BS EN 60439-3 Annex 2A • 100A Switch


Hager - RCCB Incomer Enclosure Split Load - Metal

Code - Plain Code - Glazed Description SizeVH755H1 VH755H1G 10 Way Split Load 5+5 2 x 63A 30mA RCCBVH766H1 VH766H1G 12 Way Split Load 6+6 2 x 63A 30mA RCCBVH712C1 VH712C1G 12 Way Split Load Configurable 2 x 63A 30mA RCCBVH714C1 VH714C1G 14 Way Split Load Configurable 2 x 63A 30mA RCCBVH855H VH855HG 10 Way Split Load 5+5 2 x 80A 30mA RCCBVH866H VH866HG 12 Way Split Load 6+6 2 x 80A 30mA RCCB

• Metal, split load and configurable enclosures, 1 row from 10 to 16 modules • Surface and flush mounted enclosures, with a rigid chassis, housing a Switch Disconnector and RCCB • Complies with BS EN 60439-3 Annex 2A • 100A Switch

Hager - Switch Disconnector Incomer Enclosure - Insulated

Code - Plain Code - Glazed Modules Incomer IsolatorVC201 VC201G 1 63AVC202 VC202G 2 63AVC204 VC204G 4 63AVC206 VC206G 6 63AVC104 VC104G 4 100AVC106 VC106G 6 100AVC108 VC108G 8 100AVC110 VC110G 10 100AVC112 VC112G 12 100AVC114 VC114G 14 100AVC116 VC116G 16 100AVC120 VC120G 20 100A

• Insulated, switch disconnector incomer enclosures, 1 row from 1 to 20 outgoing ways • Surface mounted enclosures, with a rigid chassis, housing a 63 Amp or 100 Amp Switch Disconnector • Complies with BS EN 60439-3 Annex 2A • Comes with Plain or Glazed doors

Hager - Switch Disconnector Incomer Enclosure - Metal

Code - Plain Code - Glazed Modules Incomer IsolatorVH201 - 1 63AVH202 - 2 63AVH104 VH104G 4 100AVH106 VH106G 6 100AVH108 VH108G 8 100AVH110 VH110G 10 100AVH114 VH114G 14 100AVH116 VH116G 16 100AVH120 VH120G 20 100A

• Metal, switch disconnector incomer enclosures, 1 row from 1 to 20 outgoing ways • Surface mounted enclosures, with a rigid chassis, housing a 63 Amp or 100 Amp Switch Disconnector • Complies with BS EN 60439-3 Annex 2A • Comes with Plain or Glazed door



Hager - MCB Type B 6kA

Code Modules RatingMTN106 1 SP B 6A 6kAMTN110 1 SP B 10A 6kAMTN116 1 SP B 16A 6kAMTN120 1 SP B 20A 6kAMTN132 1 SP B 32A 6kAMTN140 1 SP B 40A 6kAMTN150 1 SP B 50A 6kAMTN163 1 SP B 63A 6kA

• Single Pole

Code Modules RatingADN106 1 SP 6A 6kA 30mAADN110 1 SP 10A 6kA 30mAADN116 1 SP 16A 6kA 30mAADN120 1 SP 20A 6kA 30mAADN132 1 SP 32A 6kA 30mAADN140 1 SP 40A 6kA 30mA

Hager - RCBO (Commercial/Industrial) 6kASingle Pole, Switched Neutral, Type B 6kA

Wylex - NH Range Split Load Consumer Units

Wylex - NH Range Main Switch Consumer Units

Code Description NHRS10SSLHI Insulated 10 Way (3 x 2-5 Way Configurable)NHRS15SSLHI Insulated 15 Way (3 x 2-9 Way Configurable)NHRS10SSLMHI Metal 10 Way (3 x 2-5 Way Configurable)NHRS15SSLMHI Metal 15 Way (3 x 2-9 Way Configurable)

Code - Insulated Code - Metal ModulesNH504 NH506 5 NH804 NH806 8 NH1104 NH1106 11 NH1404 NH1406 14 NH1904 NH1906 19

• Twin High Integrity RCD Split Load Consumer Unit • C/w Glazed Door • 100A Isolator + 2 x 80A 30mA RCD

• C/w glazed door • 100A


DISTRIBUTION BOARDS & ANCILLARIES

ABB - Protecta Distribution Boards Single Phase Type A

Code Order Code Description ModulesECS104C 1SKB106142C2001 SP&N Type A 4ECS107C 1SKB109142C2001 SP&N Type A 7ECS111C 1SKB113142C2001 SP&N Type A 11ECS116C 1SKB118142C2001 SP&N Type A 16ECS120C 1SKB122142C2001 SP&N Type A 20

• Constructed to BSEN60439 part 1 & 3. IP30 to BSEN60529. Finished in RAL7035 • Supplied without incomer • Earth and neutral bars included • Neutral link to incomer included • Busbarrating100A-230v

ABB - Protecta Distribution Boards Three Phase Type B

Code Order Code Description ModulesEPB25-304C 1SKP804142C0059 TP&N Type B 4EPB25-306C 1SKP806142C0059 TP&N Type B 6EPB25-308C 1SKP808142C0059 TP&N Type B 8 EPB25-312C 1SKP812142C0059 TP&N Type B 12EPB25-316C 1SKP816142C0059 TP&N Type B 16 EPB25-320C 1SKP820142C0059 TP&N Type B 20 EPB25-324C 1SKP824142C0059 TP&N Type B 24

• Constructed to BS EN60439 part 1 & 3 • Voltageratingat230/400v50Hz • Integral door latch with key • SecurityLockisalsoavailable(pleaseask) • Incomingdevicesupto250Amountedintheboard • IP Ingress protection IP41BSEN60529 • Enclosure finished in RAL7035 • 4 - 24 TP&N ways • Busbar rated 250A • Faultlevel35kA • Earth and neutral terminals included • Reversibledoor

ABB - Protecta Distribution Boards Type B Connection KitCode Order Code DescriptionEPBKIT2C 1SKA142000C1001 F200 RCD Connection Kit EPBKIT3C1 1SKA143000C3001 120mm Cable Connection Kit EPBKIT4C1 1SKA144000C3001 70mm Cable Connection Kit



S200M Series BS EN 60898 10kA

ABB - Protecta Type A Distribution Board MCB

Code Type B Type C RatingS201M•6 2CDS271001R0065 2CDS271001R0064 6A 10kAS201M•8 - 2CDS271001R0084 8A 10kAS201M•10 2CDS271001R0105 2CDS271001R0104 10A 10kAS201M•13 2CDS271001R0135 2CDS271001R0134 13A 10kAS201M•16 2CDS271001R0165 2CDS271001R0164 16A 10kAS201M•20 2CDS271001R0205 2CDS271001R0204 20A 10kAS201M•25 2CDS271001R0255 2CDS271001R0254 25A 10kAS201M•32 2CDS271001R0325 2CDS271001R0324 32A 10kAS201M•40 2CDS271001R0405 2CDS271001R0404 40A 10kAS201M•50 2CDS271001R0505 2CDS271001R0504 50A 10kAS201M•63 2CDS271001R0635 2CDS271001R0634 63A 10kA

•Addtrippingcurvefor B or C eg: S201MB6Type B - Suitable for small inrush or switching surges, heating loads and tungsten lightingType C - Suitable for moderate switching surges for sort duration. eg. discharge lamps




• S200M Series • BS EN 60898 10kA (BS EN60947-2 15kA<50A) • Suitable for cable protection and moderate switching surges for short duration. eg. discharge lamps. • Triple Pole


Code Order Code RatingS202MC0.5 2CDS272001R0984 0.5A 10kAS202MC1 2CDS272001R0014 1A 10kAS202MC2 2CDS272001R0024 2A 10kAS202MC3 2CDS272001R0034 3A 10kAS202MC6 2CDS272001R0064 6A 10kAS202MC8 2CDS272001R0084 8A 10kAS202MC10 2CDS272001R0104 10A 10kA


• S200M Series • BS EN 60898 10kA (BS EN60947-2 15kA<50A) • Suitable for cable protection and moderate switching surges for short duration eg. discharge lamps • Double Pole


ABB - Protecta Type A & B Distribution Board MCB Type D

Code - SP Order Code Code - DP Order Code RatingS201D1 2CDS251001R0011 S202D1 2CDS252001R0011 1A 6kAS201D2 2CDS251001R0021 S202D2 2CDS252001R0021 2A 6kAS201D3 2CDS251001R0031 S202D3 2CDS252001R0031 3A 6kAS201D4 2CDS251001R0041 S202D4 2CDS252001R0041 4A 6kAS201D6* 2CDS251001R0061 S202D6 2CDS252001R0061 6A 6kAS201D10* 2CDS251001R0101 S202D10 2CDS252001R0101 10A 6kAS201D16* 2CDS251001R0161 S202D16 2CDS252001R0161 16A 6kAS201D20* 2CDS251001R0201 S202D20 2CDS252001R0201 20A 6kAS201D25* 2CDS251001R0251 S202D25 2CDS252001R0251 25A 6kAS201D32* 2CDS251001R0321 S202D32 2CDS252001R0321 32A 6kAS201D40* 2CDS251001R0401 S202D40 2CDS252001R0401 40A 6kAS201D50* 2CDS251001R0501 S202D50 2CDS252001R0501 50A 6kAS201D63* 2CDS251001R0631 S202D63 2CDS252001R0631 63A 6kA*Type A Distribution Board

• S200 Series • Suitable for cable protection and high inrush applications such as transformers

ABB - Protecta Type A Distribution Board RCCB

Code Order Code RatingF202AC-63/0.03 2CSF202001R1630 63A 30kAF202AC-63/0.3 2CSF202001R3630 63A 300kAF202AC-80/0.03 2CSF202001R1800 80A 30kAF202AC-100/0.03 2CSF202001R1900 100A 30kA

• Double Pole

ABB - Protecta Type B Distribution Board RCCB

Code Order Code RatingF204AC-63/0.03 2CSF204001R1630 63A 30kAF204AC-63/0.1 2CSF204001R2630 63A 100kAF204AC-63/0.3 2CSF204001R3630 63A 300kAF204AC-80/0.03 2CSF204001R1800 80A 30kAF204AC-100/0.03 2CSF204001R1900 100A 30kAF204AC-100/0.1 2CSF204001R2900 100A 100kAF204AC-100/0.3 2CSF204001R3900 100A 300kA

• 4 Pole • F200 Series • To BS EN 61008

ABB - Protecta type B Distribution Board Switch DisconnectorsCode Order Code Description RatingE203/100R 2CDE283001R0100 TP Switch Disconnector (No Kit Reqd) 100AE203/125R 2CDE283001R0125 TP Switch Disconnector (No Kit Reqd) 125A1SDA051327R1 1SDA051327R1 TP Switch Disconnector MCCB (Requires Kit) 250A



Code-3P Code-4P RatingOT32TPN-B OT32FP-B 32AOT40TPN-B OT40FP-B 40AOT80TPN-B OT80FP-B 80AOT115TPN-B OT115FP-B 115AOT125TPN-B OT125FP-B 125AOT160TPN-B OT160FP-B 160A

Code-3P Code-4P RatingOT200TPN-B OT200FP-B 200AOT315TPN-B OT315FP-B 315AOT500TPN-B OT500FP-B 500AOT630TPN-B OT630FP-B 630AOT800TPN-B OT800FP-B 800A

ABB - Load Break Switches • IP65 rated (not suitable for external installation) • Powder coated textured finish (RAL 7035) • All 3 pole switches include detachable neutral link (OT160 solid link) • Hinged lid complete with lock • Padlockable pistol grip handle as standard • Removableglandplatesfittedtopandbottom(seebelowforknockoutconfigurations) • Spreaderboxesavailable

DormanSmith-Loadlimiter63TypeBDistributionBoards

DormanSmith-Loadlimiter63TypeBDistributionBoardsMCB

Code Description ModulesDBX04R TP&N Type B 4DBX06R TP&N Type B 6DBX08R TP&N Type B 8DBX12R TP&N Type B 12DBX16R TP&N Type B 16DBX20R TP&N Type B 20

Single-pole MCBsCode - B Code - C RatingK1PB06 K1PC06 6AK1PB10 K1PC10 10AK1PB13 K1PC13 13AK1PB16 K1PC16 16AK1PB20 K1PC20 20AK1PB25 K1PC25 25AK1PB32 K1PC32 32AK1PB40 K1PC40 40AK1PB50 K1PC50 50AK1PB63 K1PC63 63A

Triple-pole MCBsCode - B Code - C RatingK3PB06 K3PC06 6AK3PB10 K3PC10 10AK3PB13 N/A 13AK3PB16 K3PC16 16AK3PB20 K3PC20 20AK3PB25 K3PC25 25AK3PB32 K3PC32 32AK3PB40 K3PC40 40AK3PB50 K3PC50 50AK3PB63 K3PC63 63A

• Exceeds the requirements of EN 60439-3 • ASTA certified busbars rated at 10kA for 250mS • Neutral and earth terminal 25mm2 for each single-pole way • Integral clean earth facility • Enclosure are 484mm wide x 159mm deep • 4-24 TP&N outgoing ways • IP4X Ingress Protection

• Exceeds the requirements of EN 60898 • 10kA rated breaking capacity to EN60898 • 15kA rated breaking capacity to EN60947-2 • Contact position indicator • 35mm2 cable capacity


DormanSmith-Loadlimiter63TypeBDistributionBoardsSwitchDisconnector

DormanSmith-Loadlimiter63TypeBDistributionBoardsRCBO

Code Description ModulesAV3100 TP Switch Disconnector 100AAV4100 FP Switch Disconnector 100AAV3125 TP Switch Disconnector 125AAV4125 FP Switch Disconnector 125A

Code - B Code - C RatingKR1PB0630 KR1PC0630 6A 30mAKR1PB1030 KR1PC1030 10A 30mAKR1PB1630 KR1PC1630 16A 30mAKR1PB2030 KR1PC2030 20A 30mAKR1PB3230 KR1PC3230 32A 30mAKR1PB4030 KR1PC4030 40A 30mAKR1PB4530 KR1PC4530 45A 30mA

Code - B Code - C Rating- KR1PC06100 6A 100mA- KR1PC10100 10A 100mA- KR1PC16100 16A 100mA- KR1PC20100 20A 100mA- KR1PC32100 32A 100mA- KR1PC40100 40A 100mA

Switch Disconnector 125A Max • Exceeds the requirements of EN 60947-3 • 50mm2 cable capacity • Duty category of AC22

• Exceeds the requirements of EN 61009 • Single module: Type AC • 10kA rated breaking capacity • Terminal capacity: outgoing terminals 10mm2 • Terminal capacity: busbar side terminals 35mm2

Eaton-Memshield3DistributionBoardsThreePhaseTypeA

Code Description ModulesEAM4 SP&N Type A 4 EAM7 SP&N Type A 7 EAM10 SP&N Type A 10 EAM13 SP&N Type A 13EAM16 SP&N Type A 16

• Standard125ASPNtypeAdistributionboardsareavailablewithachoiceof4, 7, 10, 13 or 16 outgoing ways • A wide range of incomers can be fitted to allow for the flexibility needed in modern installations • 125A

Eaton-Memshield3DistributionBoardsThreePhaseTypeB

Code Description ModulesEBM41 TP&N Type B 4 EBM61 TP&N Type B 6 EBM81 TP&N Type B 8 EBM121 TP&N Type B 12EBM182 TP&N Type B 18

• Standard125A/250ATPNtypeBdistributionboardsareavailablewithachoice of 4, 6, 8, 12, 16 or 24 outgoing ways. • A wide range of incomers can be fitted to allow for the flexibility needed in modern installations. • They comply fully with BS5486: Pt12 and BSEN60439-3



Code - B Code - C Code - D RatingEMBH106 EMCH106 EMDH106 6A 10/15kAEMBH110 EMCH110 EMDH110 10A 10/15kAEMBH116 EMCH116 EMDH116 16A 10/15kAEMBH120 EMCH120 EMDH120 20A 10/15kAEMBH125 EMCH125 EMDH125 25A 10/15kAEMBH132 EMCH132 EMDH132 32A 10/15kAEMBH140 EMCH140 EMDH140 40A 10/15kAEMBH150 EMCH150 EMDH150 50A 10/15kAEMBH163 EMCH163 EMDH163 63A 10/15kA

Eaton-Memshield3TypeADistributionBoardMCB • The MCB’s are suitable for use with Memshield 3 Distribution boards • Dual rated, 10kA to IEC 60898 and 15kA to IEC 60947-2

Code - B Code - C Code - D RatingEMBH306 EMCH306 EMDH306 6A 10/15kAEMBH310 EMCH310 EMDH310 10A 10/15kAEMBH316 EMCH316 EMDH316 16A 10/15kAEMBH320 EMCH320 EMDH320 20A 10/15kAEMBH325 EMCH325 EMDH325 25A 10/15kAEMBH332 EMCH332 EMDH332 32A 10/15kAEMBH340 EMCH340 EMDH340 40A 10/15kAEMBH350 EMCH350 - 50A 10/15kAEMBH363 EMCH363 - 63A 10/15kA

Eaton-Memshield3TypeBDistributionBoardMCB • The MCB’s are suitable for use with Memshield 3 Distribution boards • Dual rated, 10kA to IEC 60898 and 15kA to IEC 60947-2

Code - B Code - C RatingEMBH106R30 EMCH106R30 6A 10kAEMBH110R30 EMCH110R30 10A 10kAEMBH116R30 EMCH116R30 16A 10kAEMBH120R30 EMCH120R30 20A 10kAEMBH132R30 EMCH132R30 32A 10kA- EMCH140R30 40A 6kAEMBH140R30 - 40A 10kA

Eaton-Memshield3TypeADistributionBoardRCBO • The MEMSHIELD 3 RCBO combines the functions of an RCCB and MCB. The unique, revolutionary design allows hundreds of RCBO possibilities within a moduleaslittleas18mmwide.Thisallowsafargreaternumberofdevicestobe fitted into a distribution board • All the features of the standard MCB are maintained but with the added flexibility of residual current protection • Manufactured to IEC/EN 61009 • Sensitivity30mA • Single Pole


Accessories for SPN, Type A Distribution BoardsCode DescriptionEMBP MCB Blanking Module – 18mm EMDL Door Barrel Lock with 2 Keys EMPL Door Padlocking Kit PD1 Padlock Suitable for EMPL

Eaton-Memshield3TypeBDistributionBoardRCCB

Code Description RatingEBMR30 TPSN RCCB 100A 30mAEBMR100 TPSN RCCB 100A 100mAEBMR300 TPSN RCCB 100A 300mAEBMR300T TPSN Time Delayed RCCB 100A 300mA

4Poleincomingdevicessuppliedseparatelytodistributionboard.

Eaton-Memshield3TypeADistributionBoardRCCB

Code Description RatingEAMS100HE RCCBIncomingDevice1P+N30mA 100AEAMS100ME RCCBIncomingDevice1P+N100mA 100AEAMS100LE RCCBIncomingDevice1P+N300mA 100AEAMBT1002 Direct Connection Kit 1P+N 100A

Incomingdevicessuppliedseparatelytodistributionboard.

Eaton - Exel 2 Switch Disconnectors

Switch DisconnectorsCode - DP Code - TP Rating15AXD2 15AXTN2 20A30AXD2 30AXTN2 32A60AXD2 60AXTN2 63A100AXD2 100AXTN2 100A- 125AXTN2 125A

• Exel 2 switch disconnectors and fuse-switch-disconnectors are type tested to BSEN60947-3 and meet the constructional requirements for isolation as speciifed in BSEN60947-3 • Switches are of the quick make and break type, suitable for use on AC or DC. • Unitshaveremovablemovingcontactassembliestofacilitatewiring • Exel 2 surface-mounting enclosures are fabricated from rust-protected sheet steel with a light grey paint finish with removable top and bottom endplatesincorporatingknockouts(blankendplatesavailable)andgasketed doorsgivingIP41protection.Chromium-platedfrontoperatinghandleswith “ON (I) OFF (O)” indication, and internal fixing enabling units to be mounted closely side by side • Interiors comprise porcelain bases fitted with non-ferrous conducting components



Eaton-Memshield3TypeA&BDistributionBoardSwitchDisconnectorsCode Description RatingEAMS1251N SPSN Switch Disconnector Type A 125AEBMS1253 TP Switch Disconnector Type B 125AEBMS1251N SPSN Switch Disconnector Type B 125AEBMS1253N TPSN Switch Disconnector Type B 125AEBMCC1253 TP Switch Disconnector Feeding TP AC1 Contactor, Type B 125AEBMBT2503 TP Direct Connection (Lugs Connector) 250A

Eaton - Exel 2 Switch Disconnector Fuses

Code - SPSN Code - DP Code - TP Rating15KXSC2F 15KXDC2F 15KXTNC2F 20A30KXSC2F 30KXDC2F 30KXTNC2F 32A60KXSC2F 60KXDC2F 60KXTNC2F 63A100KXSC2F 100KXDC2F 100KXTNC2F 100A- - 125KXTNC2F 125A

Hager-Invicta3DistributionBoardsThreePhaseTypeB

Code - Plain Code - Glazed Description ModulesJK104B JK104BG TP&N Type B 4JK106B JK106BG TP&N Type B 6JK108B JK108BG TP&N Type B 8JK112B JK112BG TP&N Type B 12JK116B JK116BG TP&N Type B 16JK118B JK118BG TP&N Type B 18JK124B JK124BG TP&N Type B 24

• 125A Incoming 63A Outgoing • Availablewithplainorglazeddoors • Hager Incoming Kit must be used

Hager-Invicta3DistributionBoardsTypeBIncomerKit

Code DescriptionJK11003S 3 Pole 100A Switch Disconnector Incomer KitJK11004S 4 Pole 100A Switch Disconnector Incomer KitJK11253S 3 Pole 125A Switch Disconnector Incomer KitJK11254D 125A Direct Connection KitJK10634RH 4 Pole 63A 30mA RCCB Incomer KitJK11004RH 4 Pole 100A 30mA RCCB Incomer KitJK11004RM 4 Pole 100A 100mA RCCB Incomer Kit

• 125A Incomer Kits (note: these incomer kits will only fit the 125A board(s)) fits within distribution board


Hager - Type B Distribution Board MCBCode - B Code - C Code - D Module RatingNBN106 NCN106 NDN106 1 SP 6A 10kANBN110 NCN110 NDN110 1 SP 10A 10kANBN116 NCN116 NDN116 1 SP 16A 10kANBN120 NCN120 NDN120 1 SP 20A 10kANBN125 NCN125 NDN125 1 SP 25A 10kANBN132 NCN132 NDN132 1 SP 32A 10kANBN140 NCN140 NDN140 1 SP 40A 10kANBN150 NCN150 NDN150 1 SP 50A 10kANBN163 NCN163 NDN163 1 SP 63A 10kANBN206 NCN206 NDN206 2 DP 6A 10kANBN210 NCN210 NDN210 2 DP 10A 10kANBN216 NCN216 NDN216 2 DP 16A 10kANBN220 NCN220 NDN220 2 DP 20A 10kANBN225 NCN225 NDN225 2 DP 25A 10kANBN232 NCN232 NDN232 2 DP 32A 10kANBN240 NCN240 NDN240 2 DP 40A 10kANBN250 NCN250 NDN250 2 DP 50A 10kANBN263 NCN263 NDN263 2 DP 63A 10kANBN306 NCN306 NDN306 3 TP 6A 10kANBN310 NCN310 NDN310 3 TP 10A 10kA

Code - B Code - C Modules RatingADB104 ADC119 1 6A 10kA 30mAADB105 ADC120 1 10A10kA 30mAADB107 ADC122 1 16A10kA 30mAADB108 ADC123 1 20A10kA 30mAADB109 ADC124 1 25A10kA 30mAADB110 ADC125 1 32A10kA 30mAADB111 ADC126 1 40A10kA 30mAADB112 ADC127 1 45A10kA 30mAADB113 ADC128 1 50A10kA 30mA

Hager - RCBO (Commercial/Industrial) 10kA

Code Modules RatingADN106 1 SP 6A 6kA 30mAADN110 1 SP 10A 6kA 30mAADN116 1 SP 16A 6kA 30mAADN120 1 SP 20A 6kA 30mAADN132 1 SP 32A 6kA 30mAADN140 1 SP 40A 6kA 30mA

Hager - RCBO (Commercial/Industrial) 6kA

• Single Pole



Schneider - Acti9 Distribution Boards Single Phase Type A

• Fully type tested conditional short circuit rating of 16kA to BS EN 61439-3 • HighperformanceMCB10kABSEN6089815kABSEN60947-2inB,CorDcurve single and double pole • 125A busbar rating • Isobar disconnection to BS EN 60947-3 ensuring unused outgoing ways are isolated • Option of switching outgoing neutral on all boards using distributed neutral kit • Terminal block for feeding up to 100A • Rangeofincomers:switchdisconnectors,residualcurrentdevices,terminalblocks • SinglepoleRCBOforneworretrofitmaintainingdevicedensity • Fullrangeofdeviceaccessoriesandauxiliaries • Knockouts for cable gland and conduit mixed to suit the installation needs without loss of space • Split metering options

Acti9 Isobar is a complete range of single and 3 phase distribution boards for commercial and industrial applications.

Code No. of SP Ways No. of DP WaysSEA9AN2 2 1SEA9AN6 6 3SEA9AN10 10 5

Code No. of SP Ways No. of DP WaysSEA9AN14 14 7SEA9AN18 18 9SEA9AN27 27 12

Code Modules RatingCCC216U 2 DP 16A 10mACDC225U 2 DP 25A 30mACDC240U 2 DP 40A 30mACDC263U 2 DP 63A 30mACD280U 2 DP 80A 30mACD284U 2 DP 100A 30mACEC225U 2 DP 25A 100mACEC240U 2 DP 40A 100mACEC263U 2 DP 63A 100mACE280U 2 DP 80A 100mACE284U 2 DP 100A 100mACFC225U 2 DP 25A 300mACFC240U 2 DP 30A 300mACFC263U 2 DP 63A 300mACF280U 2 DP 80A 300mACF284U 2 DP 100A 300mACDC425U 4 FP 25A 30mACDC440U 4 FP 40A 30mACDC463U 4 FP 63A 30mACD480U 4 FP 80A 30mA

Hager - Distribution Board RCCB • Awiderangeofcurrentratingsandsensitivitiesareavailable • Suitable for domestic, commercial and industrial applications

Three & Four PoleCode DescriptionHCA125Z 125A 3 PoleHCA126Z 125A 4 Pole

Hager - Switch Disconnectors x160


Schneider - Acti9 Distribution Boards Three Phase Type B • Fully type tested conditional short circuit rating of 25kA to BS EN 61439-3 • High performance MCB 10kA BS EN 60898 15kA BS EN 60947-2 inB,CorDcurve1,2,3,4pole • 250A busbar rating • Isobar disconnection to BS EN 60947-3 ensuring unused outgoing ways are isolated • Option of switching outgoing neutral on all boards using distributed neutral kit • Terminal block for feeding up to 100A • Range of incomers: switch disconnectors, residual current devices,terminalblocks,mccb

• SinglepoleRCBOforneworretrofitmaintainingdevicedensity • Fullrangeofdeviceaccessoriesandauxiliaries • Knockouts for cable gland and conduit mixed to suit the installation needs without loss of space • Removableinsulatedpanassembly • Fully shrouded neutral • Split neutral bars • Removableglandplates • Optional metering, dual supply, surge protection and contactor on incoming • Metered extension enclosures

Code No. of TP Ways No. of SP Ways No. of DP WaysSEA9BN4 4 12 6SEA9BN6 6 18 9SEA9BN8 8 24 12SEA9BN12 12 36 18SEA9BN16 16 48 24SEA9BN18 18 54 26SEA9BN24 24 72 36

Schneider - iC60H MCB Type B

Schneider - iC60H MCB Type C

Code - SP A9F53101A9F53102A9F53104A9F53106A9F53110A9F53116A9F53120A9F53125A9F53132A9F53140A9F53150A9F53163

Code - DP A9F53201A9F53202A9F53204A9F53206A9F53210A9F53216A9F53220A9F53225A9F53232A9F53240A9F53250A9F53263

Code - TP A9F53301A9F53302A9F53304A9F53306A9F53310A9F53316A9F53320A9F53325A9F53332A9F53340A9F53350A9F53363

Rating1A 10kA2A 10kA4A 10kA6A 10kA10A 10kA16A 10kA20A 10kA25A 10kA32A 10kA40A 10kA50A 10kA63A 10kA

Code - SP A9F54101A9F54102A9F54104A9F54106A9F54110A9F54116A9F54120A9F54125A9F54132A9F54140A9F54150A9F54163

Code - DPA9F54201A9F54202A9F54204A9F54206A9F54210A9F54216A9F54220A9F54225A9F54232A9F54240A9F54250A9F54263

Code - TPA9F54301A9F54302A9F54304A9F54306A9F54310A9F54316A9F54320A9F54325A9F54332A9F54340A9F54350A9F54363


• Circuit protection against short-circuit currents • Circuitprotectionagainstoverloadcurrents • Suitable for industrial isolation according to IEC/EN 60947-2 standard • Fault tripping indication by a red mechanical indicator in circuit breaker front face



Schneider - iC60H MCB Type DCode - SP A9F55101A9F55102A9F55104A9F55106A9F55110A9F55116A9F55120A9F55125A9F55132A9F55140A9F55150A9F55163

Code - DPA9F55201A9F55202A9F55204A9F55206A9F55210A9F55216A9F55220A9F55225A9F55232A9F55240A9F55250A9F55263

Code - TPA9F55301A9F55302A9F55304A9F55306A9F55310A9F55316A9F55320A9F55325A9F55332A9F55340A9F55350A9F55363


Schneider - iC60H Distribution Board RCBO - AC Type

Schneider - Distribution Board RCCB - AC Type

• Protectionagainstshort-circuitsandcableoverloads • Protectionofpersonsagainstelectricshockbydirectcontact(1030mAsensitivities) • Protectionofpersonsagainstelectricshockbyindirectcontact(100mAsensitivity) • Protectionofequipmentagainstfiressetbyleakagecurrents(100mAsensitivity) • TheneutralisnotinterruptedwhenthedeviceistrippedHenceiC60HRCBOcanbe used on most circuits except for the ones operating under TT or IT earthing systems

TypeRMGresidualcurrentcircuitdevicesprovidethefunctionsofisolation,switchingand earth leakage protection of electrical circuits.They have a residual current operated electro-mechanical release which operates without any auxiliary source of supply to open a circuit automatically in the case of an earth leakage fault between phase and earth greater than or equal to a threshold of 10, 30 or 300mA.

Code-30mA Code-100mA RatingA9D11806 A9D12806 6A 10kAA9D11810 A9D12810 10A 10kAA9D11816 A9D12816 16A 10kAA9D11820 A9D12820 20A 10kAA9D11832 A9D12832 32A 10kAA9D11840 A9D12840 40A 10kAA9D11845 A9D12845 45A 10kA

Code - 2P Code - 4P RatingRMG250302 RMG250304 25A 30mARMG400302 RMG400304 40A 30mARMG630302 RMG630304 63A 30mARMG800302 - 80A 30mARMG1003002 - 100A 300mARMG631002 RMG631004 63A 100mARMG801002 - 80A 100mARMG1001002 - 100A 100mA- RMG253004 25A 300mARMG403002 RMG403004 40A 300mARMG633002 RMG633004 63A 300mARMG803002 - 80A 300mARMG1000302 - 100A 30mA


Schneider - iID Distribution Board RCCB - AC Type • Protection of persons against electric shock by direct contact (y 30 mA) • Protection of persons against electric shock by indirect contact (u 100 mA) • Protection of installations against the risk of fire (300 mA or 500 mA)

Code - 2P Code - 4P RatingA9R10216 - 16A 10mAA9R10225 - 25A 10mAA9R41225 A9R41425 25A 30mAA9R41240 A9R41440 40A 30mAA9R44240 A9R44440 40A 300mAA9R41263 A9R41463 63A 30mAA9R12263 A9R12463 63A 100mAA9R44263 A9R44463 63A 300mAA9R11280 - 80A 30mAA9R12280 - 80A 100mAA9R14280 - 80A 300mAA9R11291 - 100A 30mAA9R12291 - 100A 100mAA9R14291 - 100A 300mAA9R14291 - 100A 300mA

Schneider - Acti9 Isobar Type B Distribution Board Switch DisconnectorsCode Description RatingSEA9NI1603 Switch Disconnector - 3P+N 160ASEA9NI1604 Switch Disconnector - 4P 160ASEA9NI2003 Switch Disconnector - 3P+N 200ASEA9NI2004 Switch Disconnector - 4P 200ASEA9NI2254 Switch Disconnector - 4P 225ASEA9NI2503 Switch Disconnector - 3P+N 250ASEA9NI2504 Switch Disconnector - 4P 250A

GET ALL YOUR ELECTRICAL NEEDS UNDER ONE ROOFR&M Stock all of your Switchgear & Distribution needs, so come and visitoneofourTradeCountersattheBranchesListedonthebackcover.



Scame - Switch Disconnectors - Enclosed Surface Mounting - IP65 • Emergency Switching • Padlockable red knob • Yellow front plate • Enclosure: RAL 7035 grey

Code Description Rating Finish590.EM2013 TP Rotary Isolator, Surface Mounting Enclosed 20A 590.EM2014 4P Rotary Isolator, Surface Mounting Enclosed 20A Plastic590.EM3214 4P Rotary Isolator, Surface Mounting Enclosed 32A Plastic590.EM4014 4P Rotary Isolator, Surface Mounting Enclosed 40A Plastic590.EM6304 4P Rotary Isolator, Surface Mounting Enclosed 63A Plastic590.EM10004 4P Rotary Isolator, Surface Mounting Enclosed 100A Plastic

Wylex - NHX Range MCB Type B

Wylex - Standard Series Plug-In MCB Assemblies

Code - Type B Module RatingNHXB06 1 SP 6A 6kANHXB10 1 SP 10A 6kANHXB16 1 SP 16A 6kANHXB20 1 SP 20A 6kANHXB32 1 SP 32A 6kANHXB40 1 SP 40A 6kANHXB50 1 SP 50A 6kA

Code Description RatingB6 1 Module SP MCB c/w White Contact Shield 6AB10 1 Module SP MCB c/w Grey Contact Shield 10AB16 1 Module SP MCB c/w Blue Contact Shield 16AB20 1 Module SP MCB c/w Yellow Contact Shield 20AB32 1 Module SP MCB c/w Red Contact Shield 32AB40 1 Module SP MCB c/w Orange Contact Shield 40A

• 1 Module SP • 30mA

Wylex - NSBC Range RCBO Type B

Code - Type B RatingNHXSBS1B06 6A 30mANHXSBS1B10 10A 30mANHXSBS1B16 16A 30mA

Code - Type B RatingNHXSBS1B20 20A 30mANHXSBS1B32 32A 30mANHXSBS1B50 40A 30mA


Salzer - Changeover Switches Polycarbonate IP66

Salzer - Changeover Switches Mild Steel IP66

Code Operational Current OperationalPowerat380-440V AC-21AA AC-23AkW AC-3kWH216-71300-476V1 20 5.5 3.7H220-71300-476V1 25 7.5 5.5H226-71300-476V1 32 11 7.5H233-71300-476V1 40 15 11H406-71300-976H1 63 22 18.5H408-71300-976H1 80 30 22H410-71300-976H1 100 37 30H412-71300-976H1 125 45 37Many other variations available, please call for details


3 Pole without auxiliary contact


Salzer - Changeover Switches Stainless Steel IP66



ENCLOSED SWITCHES



MODULAR ENCLOSURES

Gewiss - 40 CD Range Surface-Mounting Enclosures

Code Modules Outer Dimensions (mm)GW40001 4 105 x 170 x 98GW40003 8 180 x 180 x 98GW40005 12 250 x 250 x 135GW40007 24 (12 x 2) 250 x 375 x 135GW40009 36 (18 x 2) 376 x 400 x 135

• 40 CD Range • Surface-mounting enclosures • Watertight enclosures - IP55 • Smoked transparent door - Walls with perforation centres • Enclosures prearranged for housing terminal blocks - Grey RAL 7035

Code Modules Size (mm)GD102E 2 160 x 55 x 75GD104E 4 180 x 110 x 75GD106E 6 180 x 148 x 75GD108E 8 180 x 182 x 75GD110E 10 180 x 218 x 75

Hager - Mini Gamma Enclosures • IP30 • Insulated Enclosure

Code - Plain Code - Glazed Locks Dimensions (mm)FL201B - 1 300 x 250 x 160FL204B FL254B 1 350 x 300 x 160FL209B FL259B 2 500 x 300 x 200FL213B FL263B 2 500 x 400 x 200FL216B FL266B 2 650 x 400 x 200FL221B FL271B 2 650 x 500 x 250FL229B FL279B 2 800 x 600 x 300FL327B FL527B 1 1200 x 850 x 300

Hager - Orion Plus GRP Enclosure • IP65

Code Modules Size (mm)VE103U 3 Module, 1 Row 110 x 175 x 93VE106U 6 Module, 1 Row 164 x 190 x 113VE110U 10 Module, 1 Row 236 x 210 x 114VE112U 12 Module, 1 row 310 x 302 x 151VE212U 24 Module, 2 Row 310 x 427 x 151VE312U 36 Module, 3 Row 310 x 552 x 151

Hager - Vector II Weather Proof Enclosures • IP55 • Insulated Enclosure


No Door Plain Glazed ModulesIU41 - - 1 Row 1 Module Suitable for 1 Module RCBO IU2 IU2/D IU2/GD 1 Row 2 ModulesIU42 IU42/D - 1 Row 2 Modules Extended HeightIU3 IU3/D - 1 Row 3 ModulesIU4 IU4/D - 1 Row 4 ModulesIU44 IU44/D IU44/GD 1 Row 4 Modules Extended HeightIU45 - - 1 Row 5 Modules Extended Height

Hager - 1 Row Boxes 1-5 Modules • Enclosure

PANEL BOARDS

Type RatingTYPE 1 UP TO 125ATYPE 2 UP TO 250ATYPE3 UP TO 400ATYPE 4 FROM 400ATYPE 5 FROM 630ATYPE 6 UP TO 800A

Eaton-Memshield3MCCBPanelboards • Panelboards to IEC61439-2. Form 3b Type 2 • Busbar system KEMA certifi ed 50kA Icc, Icw 25kA 1s • MCCBs to IEC60947-2. kA ratings shown are Ics=Icu at 400V ac • Switch disconnectors to IEC60947-3 • Outgoingdevices;NZM116A–125ASP&20A–160ATP • Wide range of extension boxes, metering, surge protection, and earth leakage incomeroptionsavailable • IP3X construction • 4, 6, 8, or 12 outgoing TP ways • Tin–plated busbars • Canbeconfigured for incomerdeviceat top of panelboard • RemovablesideglandplatesasstandardPlease call for more information

Schneider - Acti9 Isobar MGB Enclosures • Single Pole • C/WDinRailDoor&Cover

Code - Slot Code - Plain DescriptionSEA9BN4SXS SEA9BN4SXP 34 Way Module EnclosureSEA9BN8SXS SEA9BN8SXP 34 Way Module EnclosureSEA9BN12SXS SEA9BN12SXP 51 Way Module EnclosureSEA9BN16SXS SEA9BN16SXP 68 Way Module EnclosureSEA9BN24SXS SEA9BN24SXP 85 Way Module Enclosure

Schneider - Acti9 Isobar Single Phase Enclosures • Din rail only enclosures • Single Pole

Code Description RatingSEA9DE16 8 Way Module Enclosure 273 x 300 x 117SEA9DE24 12 Way Module Enclosure 345 x 300 x 117SEA9DE32 16 Way Module Enclosure 417 x 300 x 117SEA9DE40 20 Way Module Enclosure 489 x 300 x 117SEA9DE64 32 Way Module Enclosure 417 x 530 x 117



Code - SP Code - TP RatingNZMB1-1-AF16 - 16A NZMB1-1-AF20 NZMB1-A20 20ANZMB1-1-AF32 NZMB1-A32 32ANZMB1-1-AF40 NZMB1-A40 40ANZMB1-1-AF50 NZMB1-A50 50ANZMB1-1-AF63 NZMB1-A63 63ANZMB1-1-AF80 NZMB1-A80 80ANZMB1-1-AF100 NZMB1-A100 100ANZMB1-1-AF125 NZMB1-A125 125A

Eaton-Memshield3PanelboardMCCB • Maximum cable capacity 70mm2

• Single pole fixed trip. Triple pole thermal trip adjustment 0.8 to 1 x In, magnetic trip adjustment 6 to 10 x In 25kA • NZM1Frame

Code - Plain Code - Glazed ModulesJN204B JN204BG 4 JN206B JN206BG 6 JN208B JN208BG 8 JN212B JN212BG 12 JN216B JN216BG 16 Incomer Kit must be used - sold separately

Hager-Invicta3Panelboards250A250A Incoming 125A Outgoing

Code - Plain Code - Glazed ModulesJF406B JF406BG 6JF408B JF408BG 8JF412B JF412BG 12JF416B JF416BG 16JF418B JF418BG 18Incomer Kit must be used - sold separately

Hager-Invicta3Panelboards400A400A Incoming 125A Outgoing

Hager-Invicta3PanelboardMCCB

Code - 18kA HDA014ZHDA018ZHDA023ZHDA030ZHDA038ZHDA048ZHDA061ZHDA078ZHDA098ZHDA123Z

Code - 25kA HHA014ZHHA018ZHHA023ZHHA030ZHHA038ZHHA048ZHHA061ZHHA078ZHHA098ZHHA123Z

Rating16A20A25A32A40A50A63A80A100A125A

• 400/145V AC • Single Pole


Hager-Invicta3PanelboardMCCB

Code - 18kA HDA025UHDA040UHDA063UHDA080UHDA100UHDA125UHDA160U

Code - 25kA HDA025UHDA040UHDA063UHDA080UHDA100UHDA125UHDA160U

Rating25A40A63A80A100A125A160A

• 400/145V AC • Triple Pole

Schneider - Powerpact 4 Panelboards 250A

Schneider-Powerpact4Panelboards400A/630A

• The wall mounted Powerpact 4 panel board is ideally suited to installations where space is restricted or a few outgoing circuits are required • The 9 single pole way unit makes an ideal sub main splitter, by adding a mechanicalinterlockitcanbeusedformanualchangeoverapplications

• ThewallmountedPowerpact4givesmaximumflexibilitytotheinstaller.Itcan be arranged for top or bottom entry without the use of kits • Manufactured and tested to BS EN60439-1 • Rigidfoldedsheetsteelconstructionwithremovableglandplatesandendwalls • Degree of protection - IP4X • Lockableoverallsheetsteeldoorsasstandard • Bottom entry cable

Code Description RatingMG25C2 13 Way c/w Main Cable Entry At Bottom 250A 415VMG25C4 17 Way c/w Main Cable Entry At Bottom 250A 415V

Code Description RatingMG6C6 18 Way 400A/630A 415VMG6C12 36 Way 400A/630A 415VMG6C18 54 Way 400A/630A 415V

Schneider - Powerpact 4 Panelboard MCCB

Code - BE* Code - TE* Description RatingMGP2503X MGP2503TX TP MCCB 250A 36kA 415VMGP2504X MGP2504TX FP MCCB 250A 36kA 415VMGP4003X MGP4003TX TP MCCB 400A 45kA 415VMGP4004X MGP4004TX FP MCCB 400A 45kA 415VMGP6303X MGP6303TX TP MCCB 630A 45kA 415VMGP6304X MGP6304TX FP MCCB 630A 45kA 415V*BE - Bottom Entry *TE - Top Entry



Code - L1 MGP0161L1MGP0251L1MGP0301L1MGP0401L1MGP0631L1MGP0801L1MGP1001L1MGP1251L1MGP1601L1

Code - L2MGP0161L2MGP0251L2MGP0301L2MGP0401L2MGP0631L2MGP0801L2MGP1001L2MGP1251L2MGP1601L2

Code-L3MGP0161L3MGP0251L3MGP0301L3MGP0401L3MGP0631L3MGP0801L3MGP1001L3MGP1251L3MGP1601L3

Rating16A 25kA 230V25A 25kA 230V30A 25kA 230V40A 25kA 230V63A 25kA 230V80A 25kA 230V100A 25kA 230V125A 25kA 230V160A 25kA 230V

Schneider - Powerpact 4 Panel Boards MCCB Single Pole • 25kA at 230V

Code-3P Code-4P RatingMGP0163X MGP0164X 16A 36kA 415VMGP0253X MGP0254X 25A 36kA 415VMGP0303X MGP0304X 32A 36kA 415VMGP0403X MGP0404X 40A 36kA 415VMGP0633X MGP0634X 63A 36kA 415VMGP0803X MGP0804X 80A 36kA 415VMGP1003X MGP1004X 100A 36kA 415V

Code-3P Code-4P RatingMGP1253X MGP1254X 125A 36kA 415VMGP1603X MGP1604X 160A 36kA 415VMGP2003X MGP2004X 200A 36kA 415VMGP2503X MGP2504X 250A 36kA 415VMGP4003X MGP4004X 400A 36kA 415VMGP6303X MGP6304X 630A 36kA 415V

Schneider-Powerpact4PanelBoardsMCCB3&4Pole

Code - L1 MGP0162L1NMGP0252L1NMGP0302L1NMGP0402L1NMGP0632L1NMGP0802L1NMGP1002L1NMGP1252L1NMGP1602L1N

Code - L2MGP0162L2NMGP0252L2NMGP0302L2NMGP0402L2NMGP0632L2NMGP0802L2NMGP1002L2NMGP1252L2NMGP1602L2N

Code-L3MGP0162L3NMGP0252L3NMGP0302L3NMGP0402L3NMGP0632L3NMGP0802L3NMGP1002L3NMGP1252L3NMGP1602L3N

Rating16A 85kA 230V25A 85kA 230V32A 85kA 230V40A 85kA 230V63A 85kA 230V80A 85kA 230V100A 85kA 230V125A 85kA 230V160A 85kA 230V

Schneider - Powerpact 4 Panel Boards MCCB Double Pole • 85kA at 230V

• 36kA at 415V

Schneider - Powerpact 4 Panelboard Switch Disconnectors

Code - BE* Code - TE* Description RatingMGP2503NAX MGP2503NATX TP Switch Disconnector 250A 415VMGP2504NAX MGP2504NATX FP Switch Disconnector 250A 415VMGP4003NAX MGP4003NATX TP Switch Disconnector 400A 415VMGP4004NAX MGP4004NATX FP Switch Disconnector 400A 415VMGP6303NAX MGP6303NATX TP Switch Disconnector 630A 415VMGP6304NAX MGP6304NATX FP Switch Disconnector 630A 415V *BE - Bottom Entry *TE - Top Entry


Code-3P Code-4P RatingOS20TPN-B OS20FP-B 20AOS32TPN-B OS32FP-B 32AOS63TPN-B OS63FP-B 63AOS100TPN-B OS100FP-B 100AOS125TPN-B OS125FP-B 125AOS160TPN-B OS160FP-B 160A

Code-3P Code-4P RatingOS200TPN-B OS200FP-B 200AOS315TPN-B OS315FP-B 315AOS400TPN-B OS400FP-B 400AOS630TPN-B OS630FP-B 630AOS800TPN-B OS800FP-B 800A

ABB - Switch Fuses IP65 Steel Enclosure • IP65 rated (not suitable for external installation) • Powder coated textured finish (RAL 7035) • Allswitchesaresuppliedwithfusesandremovableglandplates • All 3 pole switches include detachable neutral link (OT160 solid link) • Hinged lid complete with lock • Switch Fuses are internally rated IP20 on incoming terminals up to 63A • Padlockable pistol grip handle as standard • Switch Fuses 100A are supplied with incoming terminal shrouds (not fitted) to allow customer connections • Spreaderboxesavailable

Code Description RatingJFB202U SPSN Fuse Combination Switch 20AJFB203U SPSN Fuse Combination Switch 32AJFD206U SPSN Fuse Combination Switch 63AJFE210U SPSN Fuse Combination Switch 100AJFB302U TPN Fuse Combination Switch 20AJFB303U TPN Fuse Combination Switch 32AJFD306U TPN Fuse Combination Switch 63AJFE310U TPN Fuse Combination Switch 100AJFG312U TPN Fuse Combination Switch 125A

Hager - Fuse Combination Switches • Switches Single Pole and Switched Neutral. • Triple Pole & Neutral

Operation of the device is through a door mounted rotary handle which is mechanicallyinterlockedtopreventaccesstoliveconductorswhentheswitchisinthe on position

GET ALL YOUR ELECTRICAL NEEDS UNDER ONE ROOFR&M Stock all of your Switchgear & Distribution needs, so come and visitoneofourTradeCountersattheBranchesListedonthebackcover.

HazardousAreaZones1&2,21&22

Features: • Explosion protected installation switches • Safe and reliable for inside and outside installations - in particular in chemical and off-shore plants • Thelargeactuatorsurfaceoftheinstallationswitchallowsperfectoperation,evenwhenwearingworkinggloves • Protectivecollarpreventsinadvertentoperation

Technical: • Certification: Ex II 2 G EEx de IICT6 / Ex II 2 D T 67°C • Degree of protection: IP66 • Operating temperature: -20°C to +40°C • Voltage: 250V AC • Polyamide enclosure • Current rating: 16 A • Two 20mm entries

Technical: • Approvals:ExII2GEExdeIICT6/ExII2DT53°C • Ingress Protection: IP66 • Ambient Temperature Range: -20ºC to +40ºC • Voltage: 690V max (10A 500V) • Switch rating: AC3 • Polyamide enclosure

SWITCHGEAR & DISTRIBUTIONSWITCHES - HAZARDOUS AREA

Ceag - Installation Switches Ex

Ceag - Safety Switches Ex

Code Description Cable Gland Dims (H x W x D) (mm)GHG2732000R0003 Installation Switch, 2 Pole ON/Off 16 A 2 x M20 85 x 85 x 64GHG2736000R0003 Installationswitch,1Pole,Changeover16A 2xM20 85x85x64GHG2732000R0017 Installation Switch, 2 Pole ON/Off 16 A 1 x M25 85 x 85 x 64

Code Description Cable Gland Dims (H x W x D) (mm)GHG 261 0005 R0005 Safety Switch, 3 Pole, 10 A 2 x M20 102 x 84 x 112GHG2622301R0007 Safety Switch, 4 Pole, 20 A 2 x M20 170 x 110 x 129GHG 262 2601 R0005 Safety Switch, 6 Pole, 20 A 4 x M25 225 x 140 x 156GHG2632301R0007 Safety Switch, 4 Pole, 40 A 2 x M25 225 x 140 x 156GHG2630050R0006 Safety Switch, 6 Pole, 40 A 4 x M25 271 x 271 x 275GHG 264 0020 R0006 Safety Switch, 4 Pole, 80 A 2 x M32 271 x 271 x 275GHG 264 0021 R0001 Safety Switch, 6 Pole, 80 A 1 x M25 271 x 271 x 295GHG 265 0010 R0005 Safety Switch, 4 Pole, 125 A 2 x M40 544 x 271 x 275

HazardousAreaZones1&2,21&22Features: • CEAG safety switches can be protected against inadvertent switching on by our integrated locking facility for up to three padlocks in the OFF position • To prevent manipulations, the enclosure covers cannot be opened in the locked position without destroying the enclosure itself • All CEAG safety switches feature full AC-3 motor switching capacities and isolating properties according to EN 60947-4-1 with compulsory opening of the main current contacts • OptionalEMERGENCYSTOPversionsaccordingtoEN60204-1 arealsoavailable • Additional lagging/leading auxiliary contacts guarantee double safety for extreme switching conditions

• The safety switches feature an installation friendly design and easily accessible connection terminals • Chemical and impact resistant reinforced polyester enclosure • Handle padlockable in OFF position • LidremovableinONpositiononly • Early break N/C, late make N/O auxiliary contacts • LatemakeN/Oauxiliarycontactonlyon10Aversion • Full AC-3 switching capacity • Cost-savinginstallationupto180A • Snap-on mounting up to 40 A • IP66 protection up to 180 A


TERMINALS - ABB SCREW CLAMP

TERMINALS - WAGO SCREW CLAMP

TERMINALS - WEIDMULLER CUTTING & CLAMPING

TERMINALS - WEIDMULLER PUSH IN

TERMINALS - WEIDMULLER SCREW CONNECTION

TERMINALS & CONNECTORS



TERMINALS - ABB SCREW CLAMP

TERMINALS - WAGO SCREW CLAMP

ABB - SNK Feed Through Terminal Blocks

Wago - Front Entry Rail Mounted Through Terminal Blocks

Wago - Series 279 Front Entry Rail Mounted Terminal Blocks

• Easy and ergonomic mounting thanks to the unique profile of the terminal blocks • Easy to handle • Reverse mounting error-free • 10 pre-assembled blocks for quick plug-in mounting • Clear marking areas • Maximized flexibility • Prefered terminal blocks for: High standard industries Building industry Channel partners • Ex e Increased safety versions available

Complete range of terminals and accessories available - please call for details

Features: • Featuring Wago Cage Clamp ® Technology • Vibration Proof • Maintenance Free Clamping connections • Wire Range 0.08mm² to 95mm² • Space Saving - 30% smaller than comparible products • World wide industry standards

Technical: • Rated Voltage: 800 V • Rated Surge Voltage: 8 kV • Pollution Degree: 3 • Ex i and Ex e II versions available

• (1.5mm²/AWG28) • 18 A • Horizontal Type

(4.0mm²/AWG12) 32 ACode Part No. Colour1SNK505010R0000 ZS4 Grey1SNK505020R0000 ZS4-BL Blue1SNK505150R0000 ZS4-PE G/Y1SNK505030R0000 ZS4-OR Orange1SNK505060R0000 ZS4-YL Yellow1SNK505061R0000 ZS4-GN Green1SNK505062R0000 ZS4-RD Red1SNK505063R0000 ZS4-PR Purple1SNK505064R0000 ZS4-BR Brown1SNK505065R0000 ZS4-WH White1SNK505066R0000 ZS4-BK Black



Dims (mm)Code Description Conductors (L x H x W) Colour279-901 Through Terminal Block 2 52 x 27 x 4 Grey279-902 Through Terminal Block 2 52 x 27 x 4 Orange279-904 TTB Suitable For Ex i Applications 2 52 x 27 x 4 Blue279-992 TTB Suitable For Ex e II Applications 2 52 x 27 x 4 Light Grey279-681 Through Terminal Block 3 62.5 x 27 x 4 Grey279-682 Through Terminal Block 3 62.5 x 27 x 4 Orange279-684 TTB Suitable For Ex i Applications 3 62.5 x 27 x 4 Blue279-993 TTB Suitable For Ex e II Applications 3 62.5 x 27 x 4 Light Grey




Weidmuller - I Series IDC 2 Terminals

• (2.5mm²/AWG12) • 24 A • Angled Type

• (4.0mm²/AWG12) • 32 A

IDC stands for Insulation Displacement Connection. IDC technology requires minimum work during installation but still guarantees reliable contact – and all without stripping cables and needing screws or special tools.

The spring-loaded IDC contact guarantees separation of the mechanical and electrical functions. This system provides permanent maximum safety and maximum flexibility for connecting different conductor cross-sections - even if conductors are disconnected and reconnected many times.

Dims (mm)Code Description Conductors (L x H x W) Colour280-641 Through Terminal Block 3 50.5 x 36.5 x 5 Grey280-654 Through Terminal Block 3 50.5 x 36.5 x 5 Orange280-651 TTB Suitable For Ex i Applications 3 50.5 x 36.5 x 5 Blue280-998 TTB Suitable For Ex e II Applications 3 50.5 x 36.5 x 5 Light Grey280-646 Through Terminal Block 4 50.5 x 36.5 x 5 Grey280-946 Through Terminal Block 4 50.5 x 36.5 x 5 Orange280-656 TTB Suitable For Ex i Applications 4 50.5 x 36.5 x 5 Blue280-996 TTB Suitable For Ex e II Applications 4 50.5 x 36.5 x 5 Light Grey

Dims (mm)Code Description Conductors (L x H x W) ColourHorizontal Type281-652 Through Terminal Block 4 86 x 29 x 6 Grey281-653 Through Terminal Block 4 86 x 29 x 6 Orange281-654 TTB Suitable For Ex i Applications 4 86 x 29 x 6 Blue281-994 TTB Suitable For Ex e II Applications 4 86 x 29 x 6 Light GreyAngled Type 281-631 Through Terminal Block 3 61.5 x 37 x 6 Grey281-651 TTB Suitable For Ex i Applications 3 61.5 x 37 x 6 Blue281-998 TTB Suitable For Ex e II Applications 3 61.5 x 37 x 6 Light GreyComplete range of terminals and accessories available - please call for details

Terminal Range: Rated Cross Section (mm²)Modular 2 Tier Terminals 1.5Modular Feed-Through Terminals 1.5Modular Fuse Terminals 1.5Modular PE Terminals 1.5 - 2.5Modular Isolating Terminals 1.5Plug In Modular Terminals 1.5Modular Initiator/Actuator Terminals 1.5 - 4Modular Hybrid Terminals 1.5Complete range of terminals and accessories available - please call for details

TERMINALS - WEIDMULLER CUTTING & CLAMPING

• Quick installation - savings of up to 75% • Reliable and safe connections through external tensioning • Slim design - 5mm wide



Weidmuller - P Series Terminals with Push In TechnologyTurn five into three – that’s the winning formula of the new P series with the PUSH IN connection system: the pitches for 2.5, 4, 6 and 10 mm² are each combined in one terminal block. That means you now need only three rows of terminals for wiring five pitches up to 16 mm².

This innovative concept unites the efficiency of the wide pitch with the compactness of the narrow one. The result is a maximum rated current and minimum size at the same time. That eases the workload in purchasing, logistics and design.

Particularly suitable for energy distribution in building service installations, the roof-style terminals provide convenient wiring solutions. And the technical data testify to their excellence: all the features of a 4 mm² terminal in the size of a 2.5 mm² type.

Terminal Range: Rated Cross Section (mm²)Installation Terminals 4 - 16Measurement - Test Disconnect Terminals 10Modular 2 Tier Terminals 2.5Modular Feed-Through Terminals 2.5 - 16Modular Fuse Terminals 10Modular PE Terminals 2.5 - 16Motor Connection Terminals 4Patch Distributor And Potential Distributor Terminals 4-16 LEVELTest Disconnect Terminals 2.5 - 4Complete range of terminals and accessories available - please call for details

Features: • Three instead of five terminals allow you to wire five conductor cross sections up to 16 mm² • Compact format reduces the space needed for installation and keeps the design clear • No need for tools and installation is 50% quicker • Crimped and stripped solid conductors are simply inserted into the clamping point • Vibration-proof, gas-proof connection • Flexible conductors with crimped wire end ferrules or ultrasonic welded conductors can be connected without any problems

TERMINALS - WEIDMULLER PUSH IN

R&M ASSEMBLY DIVISIONAssembly and Modifications of Enclosures for Hazardous Area and Industrial Applications

[email protected]


TS 35

TS 32

Rated Cross Section (mm2)Terminal Range: PA 6.6 KrG Earth Wire Disconnect Terminals - 6Feed-Trough Terminals For Thermocouples 4 -Installation Terminals 2.5 - 16 -Modular 2-Tier Terminals 4 -Modular Disconnect Terminals 4 4 - 10Modular Feed-Through Terminals 2.5 - 70 2.5 - 95Modular Fuse Terminals 2.5 - 10 10 - 16Modular Installation Terminals - 2.5Modular PE Terminals 2.5 - 95 -Modular Terminals With Electronic Components 4 -Modular Terminals With Screwless Connection 1 - 4 -Spring Loaded Terminals 4 -Stud Terminal Kst 16 - 70 -Complete range of terminals and accessories available - please call for details

Technical: • Special foot for TS 35 • Cross-section from 0.5 mm² to 95 mm² • Temperature ranges and material: -50°C to 100 °C – Polyamid PA 6.6 -60 °C to 130 °C – Germin KrG

Weidmuller - SAK Series Screw Connection TerminalsWeidmüller’s many years experience in the market have resulted in constant optimisation. No other modular terminal in the world is based on such comprehensive expertise as the SAK. The inconspicuous insulators with “clamping function” for electrical conductors are designed based on a wealth of sound knowledge and experience. This is necessary because every day modular terminals carry out the most diverse functions under adverse conditions. The connection systems are chosen to suit the respective applications.

Rated Cross Section (mm2)Terminal Range: PA 6.6 KrG EP CeramicBolt Type Screw Terminal - Sakg - 35 - 240 - -Feed-Trough Terminals For Thermocouples 2.5 - 4 - - -Modular 2-Tier Terminals 4 - - -Modular Disconnect Terminals 4 4 - 10 - -Modular Disconnect Test Terminals - 4 - 10 - -Modular Feed-Through Terminals 2.5 - 35 2.5 - 95 - 4 - 10Modular Fuse Terminals 4.0 - 10 10 - 16 - -Modular PE Terminals 2.5 - 70 - - -Modular Terminals With Electronic Components 4 - - -Modular Terminals With Screwless Connection 1.5 - 4 2.5 - 4 - -Spring Loaded Terminals 4 6 - 10 - -Stud Terminal Kst 35 - - -With Disconnect Plug - - 6 -With Push On Connector - - 0.5 - 2.5 -With Screw Connector - - 4 - 35 -Complete range of terminals and accessories available - please call for details

Technical: • Special foot for TS 32 • Cross-section from 0.5 mm² to 95 mm² • Temperature ranges and material: -50°C to 100 °C – Polyamid PA 6.6 -60 °C to 130 °C – Germin KrG -60 °C to 160 °C – Epoxy Resin EP -60 °C to 250 °C – Ceramic

Features: • Isolation of electrical and mechanical functions:– Steel clamping yoke for mechanical function – Copper current bar for electrical function • No-maintenance, vibration-proof screw connection • Low voltage drop and gas-tight contact point • Clamping point suitable for a wide range of cross-sections • Three different locking feet available: for TS 32, TS 35 or a combination of the two • Different isolation materials: PA 6.6, KrG, KrS • Large selection of special terminals with various connection systems • Large accessories programme available • Satisfy the requirements of EN 60947-7

TERMINALS - WEIDMULLER SCREW CONNECTION



Weidmuller - W Series Screw Connection TerminalsThe versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality tinned copper for optimum conductivity. All materials comply with RoHS requirements and have been tested to current environment guidelines.

When it comes to functional perfection down to the finest detail, the screw connection terminals in the W-Series set the standard a long time ago. The combination of benefits is unequalled and puts the W-Series in a leading position on the market. The W-Series offers solutions for conductor cross-sections between 0.05 and 300 mm² and for all standard electrical functions. The pluggable cross-connection (ZQV) is unique for most terminals with cross-sections of 2.5 and 4 mm². It brings considerable time savings compared to all other screw terminals on the market.

Thanks to the patented design of Weidmüller’s W-Series screw connection technology it is possible for two conductors with the same cross-section to be connected in one and the same clamping yoke without difficulty.

Rated Cross Section (mm²)Terminal Range: Standard CompactModular 2-Tier Terminals - Can Feed Two Potentials In One Terminal 2.5 - 10 2.5 - 4Modular Connection Terminals 1.5 - 12.5 -Modular Disconnect Terminals - -Modular Feed-Through Terminals 1.5 - 240 2.5 - 95Modular Fuse Terminals 2.5 - 6 -Modular Initiator/Actuator Terminal 2.5 - 4 -Modular Installation Terminals 2.5 - 701 -Modular PE Terminals 1.5 - 120 2.5 - 95Modular Terminals - External Spring 4 - 10 -Modular Terminals With Electronic Components 2.5 - 4 -Modular Terminals With Screwless Connection 1 - 2.5 -Modular Theromo Couple Terminals 2.5 -Motor Connection Terminals 1.5 - 12.5 -Plug In Modular Terminals 1.5 - 4 -Complete range of terminals and accessories available - please call for details

W-StandardSame contour design from 2.5 to 10 mm²Conductor sizes 0.05 to 300 mm²·Large clamping range

W-Compact Smaller sizeIdentified by an “N” in the type designationConductor sizes 0.05 to 150 mm²

• Integrated idle point when loosening the terminal screws – specially important for mechanical screwdrivers • Recessed clamping screw position provides guide for screwdriver • Simple operation: Can be clipped to or removed from the terminal rail in either direction. Integrated idle point when loosening the terminal screws – specially important for mechanical screwdrivers. Recessed clamping screw position provides guide for screwdriver All parts captive within the terminal. Numerous labelling options • Wemid insulating material: Non-tracking, CTI 600. Thermally stable up to 120 °C. High UL 94 flammability class V0. Contains no halogen or phosphorous • Common profiles: Identical size from 2.5 to 10 mm². Small number of different accessories. Easy planning • Contact security: Elastic tension clamp compensates for changes in the conductors caused by fluctuations in temperature (prevents them from coming loose). No maintenance: no need to retighten the clamping screw. Vibration-proof connection: many W-terminals certified for railway use to EN 61373. Highest contact force of all connection systems • Safe operation: Electric shock protection with connected conductors, even when cross-connected. Terminals are supplied with an open clamping point. In addition, the misplugging safeguard prevents conductors from being inserted incorrectly. Embossing on clamping yoke and current bar engage so that even the smallest conductors are reliably clamped; large conductors and also 2 conductors are gripped in the middle • Certification: Type tests to IEC 60947-7-1/-2/-3 • The reliable contact and dependability of the Weidmüller systems are verified by: National and international approvals. A large portfolio of UL and CSA approvals. W-Series certified for railway applications


Features: • Compact dimensions • Large marking surface • Integrated test point • Cross-connection capability within the Z series and to other Weidmüller families • Z-Series terminals have a large clamping range and one or two cross-connection slots • Plug-in standard cross-connections enable potentials to be distributed over any number of terminals • Available in 3 forms - Standard, Compact and Roof Style

The Connection: • In accordance with Weidmüller´s contact principle, the tension clamp system also separates, electrical and mechanical functions • Steel tension clamp provides optimum contact force • Copper bussbars for low-voltage loss

Pluggable cross-connections: • 2- to 10-pole or “continuous” for individual assembly • Full rated current • Poles can be broken out in order to bypass terminals

Simple to use: • Practical connection with parallel conductor inset and screwdriver actuation: • TOP connection technology • No special tools needed • Integrated test point

Technical: • Resistant to creepage CTI 600 • Temperature range up to 120 °C • Flammability class VO acc. to UL94 • Contains no halogen or phosphorous

Weidmuller - Z Series Tension Clamp TerminalsFor a zero-maintenance, vibration-proof connection: the stainless steel spring is the screw-less connection alternative for cross-sections up to 35 mm². Available in standard and Roof Style versions and for connection cross-sections from 0.05 mm² to 35 mm².

Rated Cross Section (mm²)Terminal Range: Standard Compact Roof StyleMini Modular Terminals 2.5 - -Modular Feed-Through Terminals 1.5 - 35 2.5 2.5 - 16Modular Fuse Terminals 2.5 - 6 - -Modular Initiator/Actuator Terminals 1.5 - -Modular Installation Terminals 2.5 - 35 - -Modular Isolating Terminals 2.5 - 2.5 - 6Modular Isolating, Measuring Terminals 6 - -Modular PE Terminals 1.5 - 35 2.5 2.5 - 16Modular Terminals With Electronic Components 2.5 - -Plug In Modular Terminals 1.5 - 2.5 - -Complete range of terminals and accessories available - please call for details

TERMINALS - WEIDMULLER TENSION CLAMP

FUSES

JUNCTION & MOUNTING BOXES - INDUSTRIAL

PLUGS & SOCKETS -HAZARDOUS AREA

PLUGS & SOCKETS - INDUSTRIAL

WIRING ACCESSORIES& ANCILLARIES

FUSES

Bussman - Red Spot Fuse HoldersRed Spot fuse holders from Bussman (originally from GE) are manufactured from tough phenolic, flame retardant, non-hydroscopic mouldings and are fully shrouded for personal safety and comply with the IEE Wiring Regulations (BS 7671:1992). Anti-vibration features protect the fuse holder against the inadvertent release of the carrier due to vibration. Red Spot fuse holders are ASTA certified to BS 88: parts 1 and 2 are suitable for use on applications up to 660Vac and 460Vdc.

Front Connected Max Fuse LinkCode Amp Colour Max Cable Size (mm2) AccommodatedRS20H 20 Amp Black 10 NIT / GNITRS20HWH 20 Amp White 10 NIT / GNITRS20HGN 20 Amp Green 10 NIT / GNITRS20HGY 20 Amp Grey 10 NIT / GNITRS32H 32 Amp Black 16 TIA/GTIARS32HWH 32 Amp White 16 TIA/GTIARS32HGN 32 Amp Green 16 TIA/GTIARS63H 63 Amp Black 50 TIS/GTISRS63HWH 63 Amp White 50 TIS/GTIS

Back Stud Connected Max Fuse LinkCode Amp Colour Max Cable Size (mm2) AccommodatedRS20P/G 20 Amp Black 10 NIT / GNITRS20P/GWH 20 Amp White 10 NIT / GNITRS20P/GGN 20 Amp Green 10 NIT / GNITRS20P/GGY 20 Amp Grey 10 NIT / GNITRS32P 32 Amp Black 16 TIA/GTIARS32PWH 32 Amp White 16 TIA/GTIARS32PGN 32 Amp Green 16 TIA/GTIARS63P 63 Amp Black 50 TIS/GTISRS63PWH 63 Amp White 50 TIS/GTIS


Aquafax - Blue Sea Fuse Range

Code Description Amp8-25164 ANL fuse 40 Amp8-25125 ANL fuse 100 Amp8-25131 ANL fuse 250 Amp8-25137 ANL fuse 500 Amp8-25259 Midi Fuse 175 Amp8-25107 Midi Fuse 250 Amp8-25503 ANL Fuse Holder 325 - 750 Amp8-27720 MIDI / AMI Safety Fuse Block 8-27721 MEGA / AMG Safety Fuse Block

• For Ticino Magic series modular devises • Wall mounted • Thermosetting (GRP) material • Transparent Door • Ingress Protection - IP44

Lewden Palazzoli - Tais-Mignon Series Enclosures

Code Description Dimensions (mm)559021 1 Installable Module 62 x 80 x 62559022 1 + 1 Installable Modules 62 x 80 x 62

JUNCTION & MOUNTING BOXES - INDUSTRIAL

WIRING ACCESSORIES & ANCILLARIES


• Wall mounted modular • Thermosetting (GRP) material • Ingress Protection: IP65

• For Ticino Magic series modular devises • Thermosetting (GRP) material • Transparent Door • 250V • Ingress Protection - IP44

COMBI 308, 607 and 1210 have an integrated thread in which cable glands can be directly mounted into – without locknuts. The patented combination of thread and membrane saves you one further working process.

• Flame-retardent and halogen-free, highly resistant to animal or vegetable fats, mineral oil, diesel, weak acids, strong and weak alkaline solution and alcohol • Captive and rust-free quick-release lid screws of plastic, closing of the box with only a quarter turn • IP 66/67 weather-proof, resistant to ultraviolet, shatter-proof, impact-resistant making it eminently suitable for extreme conditions or outdoor installations

Lewden Palazzoli - Tais-Mignon Series Junction Boxes

Lewden Palazzoli - Tais-Mignon Series Flush Mounting Supports

WISKA - Combi Range of Mounting Boxes

Wiska - Combi 108

Wiska - Combi 308

Code Description Dimensions (mm)101021 Wall 2 1/2” Gas Entries 62 x 80 x 38101035 Wall 3 1/2” Gas Entries c/w Terminals 62 x 80 x 38101045 Wall 4 1/2” Gas Entries c/w Terminals 62 x 80 x 38101061 Wall 6 1/2” Gas Entries 62 x 80 x 38101161 Wall 6 3/4” Gas Entries 77 x 102 x 48101157 Wall 6 3/4” Gas Entries c/w Terminals 77 x 102 x 48101121 Wall 2 3/4” Gas Entries 77 x 102 x 55101081 Wall 2 3/4” Gas Entries 125 x 77 x 55

Code Description Dimensions (mm)559011 1 Installable Module 50 x 50559012 1 + 1 Installable Modules 50 x 50

DimensionsCode Description (L x W x H) (mm) 10060523 Mounting Box RAL 7035 Grey 76 x 76 x 5110061998 Mounting Box Black 76 x 76 x 5110060623 Mounting Box White 76 x 76 x 51



PLUGS & SOCKETS - HAZARDOUS AREA

Ceag - Plugs, Sockets and Connectors

Code - 16A DescriptionGHG 511 7304 R0001 100 to 130V 2P + E PlugGHG 511 7306 R0001 200 to 250V 2P + E PlugGHG 511 7409 R0001 200 to 250V 3P + E PlugGHG 511 7406 R0001 380 to 415V 3P + E PlugGHG 511 7506 R0001 380 to 415V 3P + N + E PlugGHG 511 4304 R0002 100 to 130V 2P + E SocketGHG 511 4306 R0002 200 to 250V 2P + E SocketGHG 511 4409 R0001 200 to 250V 3P + E SocketGHG 511 4406 R0001 380 to 415V 3P + E SocketGHG 511 4506 R0001 380 to 415V 3P + N + E SocketGHG 511 3304 R0001 100 to 130V 2P + E CouplerGHG 511 3306 R0001 200 to 250V 2P + E CouplerGHG 511 3409 R0001 200 to 250V 3P + E CouplerGHG 511 3406 R0001 380 to 415V 3P + E CouplerGHG 511 3506 R0001 380 to 415V 3P + N + E Coupler

Code - 32A DescriptionGHG 511 7304 R0001 100 to 130V 2P + E PlugGHG 511 7306 R0001 200 to 250V 2P + E PlugGHG 511 7409 R0001 200 to 250V 3P + E PlugGHG 511 7406 R0001 380 to 415V 3P + E PlugGHG 511 7506 R0001 380 to 415V 3P + N + E PlugGHG 511 4304 R0002 100 to 130V 2P + E SocketGHG 511 4306 R0002 200 to 250V 2P + E SocketGHG 511 4409 R0001 200 to 250V 3P + E Socket

Code - 63A DescriptionGHG 514 7406 R0001 380 to 415V 3P + E PlugGHG 514 7506 R0001 380 to 415V 3P + N + E PlugGHG 514 4406 R0001 380 to 415V 3P + E SocketGHG 514 4506 R0001 380 to 415V 3P + N + E Socket

Features: • Approved for gas and dust applications • Chemical and impact resistant reinforced polyester • Connection terminals for 4mm cable • Metric entries in socket, 9-17mm cable entry in plug and coupler • Switching capacity up to 690v AC, 16A, AC3 • Low voltage switching capacity 50v AC3 16A, DC1 16A • Self cleaning lamellar contacts • Plug-in and turn switching operation

Technical: • Approvals: Ex II 2 G : EEx ed IIC T6 / Ex II 2 D IP66 T60° • Degree of protection: IP66 • Operating temperature: - 20°C to + 40° C • Material: Sockets GRP, plugs & couplers polyamide

Wiska - Combi 607

Wiska Comb 1010



WIRING ACCESSORIES & ANCILLARIES

www.rm-electrical.com195135 www.rm-electrical.com

PLUGS & SOCKETS - INDUSTRIALGewiss - Plug - Straight IEC 309 IP44

Gewiss - Plug - Straight IEC 309 IP67

Code Description Rated ColourGW60001 2P+E 16A 110V 50/60Hz YellowGW60002 3P+E 16A 110V 50/60Hz YellowGW60012 2P+E 32A 110V 50/60Hz YellowGW60004 2P+E 16A 220V 50/60Hz BlueGW60015 2P+E 32A 220V 50/60Hz BlueGW60008 3P+E 16A 380V 50/60Hz RedGW60009 3P+N+E 16A 380V 50/60Hz RedGW60019 3P+E 32A 380V 50/60Hz RedGW60020 3P+N+E 32A 380V 50/60Hz Red

Code Description Rated ColourGW60023 2P+E 16A 110V 50/60Hz YellowGW60026 2P+E 16A 220V 50/60Hz BlueGW60037 2P+E 32A 220V 50/60Hz BlueGW61048 2P+E 63A 220V BlueGW60030 3P+E 16A 380V 50/60Hz RedGW60042 3P+N+E 32A 380V 50/60Hz RedGW61052 3P+E 63A 380V RedGW61053 3P+N+E 63A 380V RedGW60061 3P+N+E 125A 380V 50/60Hz Red

Gewiss - Socket Outlet IEC 309 IP44Code No. of Poles Rated ColourGW62001 2P+E 16A 110V YellowGW62002 3P+E 16A 110V YellowGW62003 3P+N+E 16A 110V YellowGW62004 2P+E 16A 220V BlueGW62005 3P+E 16A 220V BlueGW62006 3P+N+E 16A 220V BlueGW62007 2P+E 16A 380V RedGW62008 3P+E 16A 380V RedIP67 Version Available - Please call for details

Code No. of Poles Rated ColourGW62009 3P+N+E 16A 380V RedGW62010 3P+E 16A 500V BlackGW62011 3P+N+E 16A 500V BlackGW62012 2P+E 32A 110V YellowGW62013 3P+E 32A 110V YellowGW62015 2P+E 32A 220V BlueGW62019 3P+E 32A 380V RedGW62020 3P+N+E 32A 380V Red

Mennekes - Plug Straight - AM Top®

Code No. of Poles Rated Colour247 2P+E 16A 110V Yellow259 2P+E 32A 110V Yellow248 2P+E 16A 230V Blue260 2P+E 32A 230V Blue

Code No. of Poles Rated Colour3 3P+N+E 16A 400V Red4 3P+N+E 32A 400V Red252 3P+E 16A 400V Red264 3P+E 32A 400V Red

Single part body, screw terminals, IP44

Mennekes - Socket Outlet - AM Top®

Code No. of Poles Rated Colour509 2P+E 16A 110V Yellow521 2P+E 32A 110V Yellow510 2P+E 16A 230V Blue522 2P+E 32A 230V Blue

Code No. of Poles Rated Colour514 3P+E 16A 400V Red5 3P+N+E 16A 400V Red526 3P+E 32A 400V Red6 3P+N+E 32A 400V Red

Single part body, screw terminals, IP44

[email protected] [email protected] 136

Mennekes - Socket Outlet - Surface Mounted Top & Bottom Entry

Mennekes -Socket Outlet - Surface Mounted Top Entry

Code No. of Poles Rated Colour1420 2P+E 32A 110V Yellow1423 3P+E 32A 110V Yellow1555 3P+N+E 32A 110V Yellow1421 2P+E 32A 230V Blue1424 3P+E 32A 230V Blue1556 3P+N+E 32A 230V Blue1422 2P+E 32A 400V Red1425 3P+E 32A 400V Red1557 3P+N+E 32A 400V Red

Code No. of Poles Rated Colour1177 2P+E 16A 110V Yellow1368 2P+E 32A 110V Yellow1178 2P+E 16A 230V Blue1369 2P+E 32A 230V Blue1268 3P+E 16A 400V Red1 3P+N+E 16A 400V Red1373 3P+E 32A 400V Red2 3P+N+E 32A 400V Red

CEE Type, IP44.

CEE Type, IP44.

Gewiss - Socket-Outlet - Switch Interlocked IEC 309 IP44

Lewden Palazzoli - Tais-Mignon Series Socket Outlets

Code No. of Poles Rated ColourGW66001 2P+E 16A 110V YellowGW66004 2P+E 16A 220V YellowGW66012 2P+E 32A 110V YellowGW66015 2P+E 32A 220V BlueGW66008 3P+E 16A 380V RedGW66009 3P+N+E 16A 380V RedGW66019 3P+E 32A 380V RedGW66020 3P+N+E 32A 380V Red

Code Description No. of Poles Rated431237 Wall Mounting Enclosed 2P+E 10/16A471204 Wall Mounting IP44 Thermosetting 2P+E 16A 110V471304 Wall Mounting IP44 Thermosetting 2P+E 16A 220V431252 Schuko Flush Enclosed 2P+E 10/16A471254 Protected Flush 4H IP44 2P+E 16A 110V471354 Protected Flush 6H IP44 2P+E 16A 230V

Gewiss - Socket-Outlet - 90° Angled Surface-MountingCode No. of Poles Rated ColourGW62474 2P+E 16A 110V YellowGW62485 2P+E 32A 110V YellowGW62477 2P+E 16A 220V BlueGW62488 2P+E 32A 220V BlueGW62481 3P+E 16A 380V RedGW62482 3P+N+E 16A 380V RedGW62492 3P+E 32A 380V RedGW62493 3P+N+E 32A 380V Red

CABLE - CURRENT CARRYING CAPACITIES

CABLE MANAGEMENT

CONDUIT & TRUNKING

CAPACITY CHART

GENERAL CONVERSION TABLES

HAZARDOUS AREA

SELECTION CHARTS

TECHNICAL INFORMATION

CABLE - CURRENT CARRYING CAPACITIES

No liability can be acceped for the data contained in the following pages, which is meant for guidance only.Please refer to the individual manufacturer for further information

TABLE 4G1A Mineral Insulated Cables - Thermoplastic covered or bare and exposed to touch (copper conductors & sheath) 30°C Ambient Air Temperature, 70°C Conductor Operating Temperature

Current Carrying Capacity (amperes)

Notes:For single core cables, the sheaths of the circuit are assumed to be connected together at both endsFor bare cables exposed to touch, the tabulated values should be multiplied by 0.9

All tables for guidance purposes only. R&M accepts no responsibility for the information contained herein

MICC Cables

Reference Method C (Clipped Direct) Reference Method E, F & G (in free air or on a perforated cable tray etc, horizontal or vertical)

Single Phase Three Phase a.c

Single Phase Three Phase a.c Conductor Cross- a.c or d.c a.c or d.c

Sectional Area mm² 2 Single 3 Single Core 3 Single Core 2 Single 3 Single Core 3 Single Core 3 Single Core Core Cables Cables In Trefoil, Cables Flat and Core Cables Cables In Trefoil, Cables Flat and Cables Flat and Touching or 1 or 1 3 Core or Touching, Horizontal Touching or 1 or 1 3 Core or Touching, Horizontal Spaced by 1 Cable 2 Core Cable 4 Core Cable or Vertical 2 Core Cable 4 Core Cable or Vertical Diameter

Light Duty 500V Vertical Horizontal1 18.5 15 17 19.5 16.5 18 20 231.5 23 19 21 25 21 23 26 292.5 31 26 29 33 28 31 34 394 40 35 38 44 37 41 45 51Heavy Duty 750V Vertical Horizontal1 19.5 16 18 21 17.5 20 22 251.5 25 21 23 26 22 26 28 322.5 34 28 31 36 30 34 37 434 45 37 41 47 40 45 49 566 57 48 52 60 51 57 62 7110 77 65 70 82 69 77 84 9516 102 86 92 109 92 102 110 12525 133 112 120 142 120 132 142 16235 163 137 147 174 147 161 173 19750 202 169 181 215 182 198 213 24270 247 207 221 264 223 241 259 29495 296 249 264 317 267 289 309 351120 340 286 303 364 308 331 353 402150 388 327 346 416 352 377 400 454185 440 371 392 472 399 426 446 507240 514 434 457 552 466 496 497 565




TABLE 4G2A Mineral Insulated Cables bare and neither exposed to touch nor in contact with conbustible materials (copper conductors & sheath) 30°C Ambient Air Temperature, 105°C Conductor Operating Temperature

Current Carrying Capacity (amperes)

Notes:For single core cables, the sheaths of the circuit are assumed to be connected together at both endsNo rating factor for grouping need be applied Where a conductor operates at a temperature exceeding 70°C it shall be ascertained that the equipment connected to the conductor is suitable for the conductor operating temperature

All tables for guidance purposes only. R&M accepts no responsibility for the information contained herein

Reference Method C (Clipped Direct) Reference Method E, F & G

Single Phase Three Phase a.c

Single Phase Three Phase a.c Conductor Cross- a.c or d.c a.c or d.c

Sectional Area mm² 2 Single 3 Single Core 3 Single Core 2 Single 3 Single Core 3 Single Core 3 Single Core Core Cables Cables In Trefoil, Cables Flat and Core Cables Cables In Trefoil, Cables Flat and Cables Flat and Touching or 1 or 1 3 Core or Touching, Horizontal Touching or 1 or 1 3 Core or Touching Spaced by 1 Cable 2 Core Cable 4 Core Cable or Vertical 2 Core Cable 4 Core Cable Diameter

Light Duty 500V Vertical Horizontal1 22 19 21 24 21 23 26 291.5 28 24 27 31 26 29 33 372.5 38 33 36 41 35 39 43 494 51 44 47 54 46 51 56 64Heavy Duty 750V Vertical Horizontal1 24 20 24 26 22 25 28 321.5 31 26 30 33 28 32 35 402.5 42 35 41 45 38 43 47 544 55 47 53 60 50 56 61 706 70 59 67 76 64 71 78 8910 96 81 91 104 87 96 105 12016 127 107 119 137 115 127 137 15725 166 140 154 179 150 164 178 20435 203 171 187 220 184 200 216 24850 251 212 230 272 228 247 266 30470 307 260 280 333 279 300 323 37095 369 312 334 400 335 359 385 441120 424 359 383 460 385 411 441 505150 485 410 435 526 441 469 498 565185 550 465 492 596 500 530 557 629240 643 544 572 697 584 617 624 704


Table 4D2A ‐ Current Carrying Capacity in AmpereCurrent Rating Chart for Multicore 70°C

*with or without protective conductor

Table 4F3A ‐ Flexible cords, non-armoured (copper conductors) BS 6141BS 6500

Extract from the IEE Wiring Regulations, 17th Edition30°C Ambient Air Temperature

90°C Conductor Operating Temperature30°C Ambient Ground Temperature

Multi- Core PVC Insulated Cables (NON Armoured, Copper Conductors)

PVC Flexes

Method A - Enclosed in conduit Method B - Enclosed in Conduit Reference Method C - Clipped Method E - In Free Air or on a in an Insulated Wall on a Wall or in Trunking Direct Perforated Cable Tray

Conductor Cross- 1 Two‐core* 1 Three-Core* or 1 Two‐core* 1 Three-Core* or 1 Two‐core* 1 Three-Core* or 1 Two‐core* 1 Three-Core* orSectional Area mm² Cable, Single 1 Four-Core Cable, Single 1 Four-Core Cable, Single 1 Four-Core Cable, Single 1 Four-Core Phase A.C. or Cable, Three- Phase A.C. or Cable, Three- Phase A.C. or Cable, Three- Phase A.C. or Cable, Three- D.C. Phase A.C. D.C. Phase A.C. D.C. Phase A.C. D.C. Phase A.C.1 111.5 15 13.5 17 14.51.5 14 13 16.5 15 19.5 17.5 22 18.52.5 18.5 17.5 23 20 27 24 30 254 25 23 30 27 36 32 40 346 32 29 38 34 46 41 51 4310 43 39 52 46 63 57 70 6016 57 52 69 62 85 76 94 8025 75 68 90 80 112 96 119 10135 92 83 111 99 138 119 148 12650 110 99 133 118 168 144 180 15370 139 125 168 149 213 184 232 19695 167 150 201 179 258 223 282 238120 192 172 232 206 299 259 328 276150 219 196 258 225 344 299 379 319185 248 223 294 255 392 341 434 364240 291 261 344 297 461 403 514 430300 334 298 394 339 530 464 593 497400 - ‐ 470 402 634 557 715 597

Current‐Carrying Capacity Current‐Carrying Capacity Maximum Mass Supportable by Conductor Cross- Sectional Three-Phase A.C. Twin Flexible CordSingle- Phase A.C. Area D.C. or Single-Phase A.C. Three-Phase A.C. (See Regulations 522.7.2 & 559.6.1.5)mm2 A A Kg0.5 3 3 20.75 6 6 31 10 10 51.25 13 ‐ 51.5 16 16 52.5 25 20 54 32 25 5



Table 4D1A ‐ Single core 70ºC thermoplastic insulated cables, nonarmoured, with or without sheath (copper conductors)

PVC Singles

Conductor Reference Method A Reference Method B Reference Method C cross ‐ (Enclosed in Conduit in (enclosed in conduit on a (Clipped Direct) sectional area Thermally Insulating Wall etc) wall or in trunking etc) 2 Cables, 3 or 4 Cables, 2 Cables, 3 or 4 Cables, 2 Cables, 3 or 4 Cables, 2 Cables, 3 Cables, 3 Cables, 2 Cables, Single-phase Single- phase Three-phase Single- phase Three-phase Single- phase Three-phase A.C Single- Three-phase Three-phase A.C or D.C or 3 Cables, A.C or D.C A.C A.C or D.C A.C A.C or D.C Flat Flat & Touching phase A.C A.C Flat A.C Trefoil Three-phase A.C Flat & Touching or Trefoil or D.C Flat

mm2 A A A A A A A A A A A1.5 14.5 13.5 17.5 15.5 20 18 - - - - - 2.5 20 18 24 21 27 25 - - - - - 4 26 24 32 28 37 33 - - - - - 6 34 31 41 36 47 43 - - - - - 10 46 42 57 50 65 59 - - - - - 16 61 56 76 68 87 79 - - - - - 25 80 73 101 89 114 104 131 114 110 146 13035 99 89 125 110 141 129 162 143 137 181 16250 119 108 151 134 182 167 196 174 167 219 19770 151 136 192 171 234 214 251 225 216 281 25495 182 164 232 207 284 261 304 275 264 341 311120 210 188 269 239 330 303 352 321 308 396 362150 240 216 300 262 381 349 406 372 356 456 419185 273 245 341 296 436 400 463 427 409 521 480240 320 286 400 346 515 472 546 507 485 615 569300 367 328 458 394 594 545 629 587 561 709 659400 - ‐ 546 467 694 634 754 689 656 852 795

Reference Method C - Clipped Direct Method D - Direct or in Ducts, in Method E - In free air or on a Ground, in/Around Buildings. Perforated Cable T ray.

Conductor Cross‐sectional Area mm² 1 Two ‐core* Cable, 1 Three ‐core* or 1 1 Two ‐core* Cable, 1 Three ‐core* or 1 1 Two ‐core* cable, 1 Three ‐core* or 1 Single-phase A.C. Four-core Cable, Single-phase A.C. Four-core Cable, Single-phase A.C. Four-core Cable, or D.C. Three-phase A.C. or D.C. Three-phase A.C. or D.C. Three-phase A.C.

1.5 21 18 22 19 22 192.5 28 25 29 24 31 264 38 33 37 30 41 356 49 42 46 38 53 4510 67 58 60 50 72 6216 89 77 78 64 97 8325 118 102 99 82 128 11035 145 125 119 98 157 13550 175 151 140 116 190 16370 222 192 173 143 241 20795 269 231 204 169 291 251120 310 267 231 192 336 290150 356 306 261 217 386 332185 405 348 292 243 439 378240 476 409 336 280 516 445300 547 469 379 316 592 510400 621 540 ‐ ‐ 683 590

Reference Method F (in free air or on aperforated cable tray, horizontal or vertical)

Touching Spaced by one diameter

Table 4E4A ‐ Current Carrying Capacity in Ampere

Current Rating Chart for Multicore ArmouredThermoplastic Insulated Cables with CopperConductors at 70°C Operating Temperature

Extract from the IEE Wiring Regulations, 17th Edition30°C Ambient Air Temperature

90°C Conductor Operating Temperature 20°C Ambient Ground Temperature

SWA Cables


Unistrut’s load testing is in accordance with CEI/IEC 61537:2001. In practical terms this covers continuous/multi span installations, evenly loaded along the length of, and across the full width of the basket. The end spans in these installations should be reduced to 0.75 of the intermediate spans.

DEFLECTION: Unistrut’s load and deflection figures are in accordance with CEI/IEC 61537:2001, with the characteristic deflection of Unistrut Cable Basket limited to span/100. and load figures inclusive of a safety factor of 1.7.

ACCESSORIES: To ensure adequate support, accessories shouldbe supported locally.

COUPLERS: The loading and deflection tables for Unistrut CableBasket assume that the couplers are located at L/5 as shown onthe schematic above.

Couplers should not be located in end spans or over supportlocations and only one pair of couplers should be installed perspan. A factor of 0.7 must be applied to the loading figures whencouplers are not positioned at L/5.

Load test according CEI/IEC 61537:2001Q = UDL (uniformly distributed load)Safety Factor = 1.7L = intermediate spanF = deflection = 1/100 of the intermediate span (max.)S = splice location

Unistrut Cable Basket

CABLE MANAGEMENT

S

0,75 L

L/5

0,4 LL

Q

Width (mm) Useful cross section (cm2) 50 25.0 100 50.1 150 75.1 200 100.2 300 150.3 400 198.4 450 221.4 500 246.0 600 295.2

Width (mm) Useful cross section (cm2) 100 96.1 200 192.2 300 288.3 400 382.4 500 476.0

100

120

20

40

60

80

01500 2000 2500

Uni

form

ly D

istr

ibut

ed L

oad

(kg/

m)

Span (mm)

AF2L 50AF2L 100AF2L 150AF2L 200AF2L 300AF2L 400AF2L 500

Load capacity for a maximum de�ection equal to 1/100 of the span, splice located to 1/5 of the span

TYPE AF2 BASKET TRAY

Uni

form

ly D

istr

ibut

ed L

oad

(kg/

m)

100

120

140

160

20

40

60

80

01500 2000 2500

Span (mm)

AF3L 100AF3L 200AF3L 300AF3L 400AF3L 500

Load capacity for a maximum de�ection equal to 1/100 of the span, splice located to 1/5 of the span

TYPE AF3 BASKET TRAY




Unistrut’s load testing is in accordance with CEI/IEC 61537:2001. In practical terms this covers continuous/multi span installations, evenly loaded along the length of, and across the full width of the ladder. The end spans in these installations should be reduced to 0.75 of the intermediate spans.

DEFLECTION: Unistrut’s load and deflection figures are in accordance with CEI/IEC 61537:2001, with the characteristic deflection of Unistrut Cable Ladder limited to span/100. and load figures inclusive of a safety factor of 1.7.

ACCESSORIES: To ensure adequate support, accessories should be supported locally.

COUPLERS: The loading and deflection tables for Unistrut Cable Ladder assume that the couplers are located at the most onerous position within the span (i.e. mid span). To maintain the load/ deflection figures stated in the tables, the couplers should not be located in end spans or over support locations. Only one pair of couplers should be installed per span.

Unistrut Cable Ladder

S

0,75 L

L/5

0,4 LL

Q

2 3 4 5 6

5000450040003500300025002000150010005000

Q (N

/m)

TYPE U10

L (Span m)

TYPE U1240003500300025002000150010005000

3 4 5 6

Q (N

/m)

L (Span m)

TYPE U155000450040003500300025002000150010005000

Q (N

/m)

3 4 5 6L (Span m)

Width Useful cross sectionmm (cm 2)100 100150 150200 200300 300400 400450 450500 500600 600750 750800 800900 900

1000 1000


1000 1250


1000 750

51U EPYT21U EPYT01U EPYT



Unistrut’s load testing is in accordance with CEI/IEC 61537:2001.In practical terms this covers continuous/multi span installations, evenly loaded along the length of, and across the full width of the tray. The end spans in these installations should be reduced to 0.75 of the intermediate spans.

DEFLECTION: Unistrut’s load and deflection figures are in accordance with CEI/IEC 61537:2001, with the characteristic deflection of Unistrut Cable Tray limited to span/100. and load figures inclusive of a safety factor of 1.7.

ACCESSORIES: To ensure adequate support, accessories should be supported locally.

COUPLERS: The loading and deflection tables for Unistrut Cable Tray assume that the couplers are located at the most onerous position within the span (i.e. mid span). To maintain the load/ deflection figures stated in the tables, the couplers should not be located in end spans or over support locations. Straight couplers were utilised for the testing of the medium and heavy duty cable trays. Only one pair of couplers should be installed per span.

Unistrut Cable Tray

0.75 L

0.5 L

0.4 LL

Q

2500

500

1000

1500

2000

00,5 1 1,5

N/m

TYPE LIGHT DUTY CABLE TRAY (L)

W= 300

W= 50-225

L (Span m)

N/m

TYPE MEDIUM DUTY CABLE TRAY (M-25)

500

600

700

800

900

400

300

2001,0 1,5 2,0

W= 300-600

W= 50-225

L (Span m)

N/m

TYPE HEAVY DUTY CABLE TRAY (H-50)

1500

2000

2500

3000

1000

500

2001,5 2 2,5

W= 75-150

W= 225-300

W= 450-600

L (Span m)

Stated loadings apply to mild steel products only.

Width Useful cross sectionmm (cm 2)50 5.475 8.1

100 10.9150 16.6225 24.9300 49.9450 75.1600 95.3750 119.3900 143.3

Width Useful cross sectionmm (cm 2)50 11.475 17.4

100 23.5150 35.6225 53.7300 70.4450 106.1600 141.8750 171.1900 205.6

Width Useful cross sectionmm (cm 2)75 35.8

100 48.1150 72.7225 108.2300 144.8450 213.6600 285.6750 357.6900 429.6

)05-H( YTUD YVAEH)52-M( YTUD MUIDEM)L( YTUD THGIL



Unistrut P1000

Also available in 2mm

)T( eziS tolShsiniFM htgneL.oN traP3 6 PO PG HG SS 25x11 28x14

P1000 • • • • • •P1000T •••••••P1000T10 • • • • • • •

*180 kL/r < 250

L(mm) F

fFmax(kN) fmax(mm)

σ=175 N/mm2 f=1/200 L f=1/360 LF (kN)

F (kN) F (kN)250 17.354 0.23 - - 16.608500 8.672 0.95 - - 16.187750 5.778 2.15 - 5.602 15.2451000 4.336 3.82 - 3.149 13.6851250 3.463 5.97 - 2.011 12.0861500 2.884 8.60 2.521 1.393 10.7221750 2.472 11.70 1.844 1.020 9.5752000 2.168 15.29 1.413 0.785 8.6232250 1.923 19.35 1.118 0.618 7.8192500 1.727 23.89 0.903 0.500 7.1122750 1.570 28.91 0.746 0.412 6.504*3000 1.442 34.40 0.628 0.343 5.995*

50

T

P1000T*

41

41

2,5mm

SSHGPGPO

A = 3. 00 cm2

/m = 2.73 kg/mI y-y = 6.10 cm4

Z y-y = 2.87 cm3

r y-y = 1.42 cmI z-z = 9.17 cm4

Z z-z = 4.44 cm3

r z-z = 1.74 cm

*180 kL/r < 250

*Alternative Key Slot Available


41

41

2,5mm

P1000 SSHGPGPO

A = 3.35 cm2

/m = 2.88 kg/mI y-y = 7.21 cm4

Z y-y = 3.10 cm3

r y-y = 1.46 cmI z-z = 9.23 cm4

Z z-z = 4.47 cm3

r z-z = 1.66 cm

L(mm) F

fFmax(kN) fmax(mm)

σ=175 N/mm2 f=1/200 L f=1/360 LF (kN)

F (kN) F (kN)250 16.069 0.27 - - 16.283500 8.034 1.05 - - 16.039750 5.356 2.35 - 4.738 15.2741000 4.012 4.18 - 2.659 13.6261250 3.208 6.54 3.071 1.707 11.8801500 2.678 9.41 2.129 1.177 10.4181750 2.296 12.81 1.560 0.863 9.2312000 2.001 16.73 1.197 0.657 8.2702250 1.785 21.18 0.942 0.520 7.4652500 1.599 26.15 0.765 0.422 6.7792750 1.452 31.64 0.628 0.343 6.190*3000 1.334 37.65 0.530 0.294 5.670*


Unistrut P1001

)T( eziS tolShsiniFM htgneL.oN traP

3 6 PO PG HG SS 25x11 28x14

P1001 • • • • • •

•••••••T1001P

P1001T10 • • • • • • •

*180 kL/r < 250

P1001

41

83

2,5mm

SSHG

A = 6.70 cm 2

/m = 5.77 kg/mI y-y = 36.27 cm 4

Z y-y = 8.78 cm 3

r y-y = 2.32 cmI z-z = 18.46 cm 4

Z z-z = 8.94 cm 3

r z-z = 1.66 cm

T =14 x28 mm

P1001T

41

83

2,5mm

SSHGPGPO

A = 6.00 cm 2

/m = 5.47 kg/mI y-y = 36.21 cm 4

Z y-y = 8.77 cm 3

r y-y = 2.45 cmI z-z = 18.34 cm 4

Z z-z = 8.88 cm 3

r z-z = 1.74 cm

*180 kL/r < 250

Continuously Seam Welded

HG



HG

L(mm) F

fFmax(kN) fmax(mm)

σ=175 N/mm 2 f=1/200 L f=1/360 L

F (kN)

F (kN) F (kN)

250 - - - - 28.253

500 - - - - 28.096

750 16.383 1.21 - - 27.792

1000 12.292 2.15 - - 27.301

1250 9.830 3.36 - - 26.438

1500 8.191 4.84 - 7.044 25.025

1750 7.024 6.59 - 5.170 23.220

2000 6.141 8.61 - 3.963 21.288

2250 5.454 10.89 - 3.129 19.394

2500 4.915 13.45 4.562 2.531 17.619

2750 4.464 16.27 3.767 2.090 15.990

3000 4.091 19.37 3.169 1.756 14.519*

L(mm) F

fFmax(kN) fmax(mm)

σ=175 N/mm 2 f=1/200 L f=1/360 L

F (kN)

F (kN) F (kN)

250 - - - - 27.458

500 - - - - 27.311

750 16.363 1.21 - - 27.027

1000 12.272 2.15 - - 26.585

1250 9.820 3.36 - - 25.830

1500 8.182 4.84 - 7.034 24.584

1750 7.014 6.59 - 5.170 22.906

2000 6.131 8.61 - 3.953 21.042

2250 5.454 10.90 - 3.120 19.198

2500 4.905 13.46 4.552 2.531 17.452

2750 4.464 16.28 3.767 2.090 15.8520

3000 4.091 19.38 3.159 1.756 14.391*

SSSpot Welded

SSPGPOSpot Welded



Unistrut P3300

Unistrut P3301

P3300T10

41

21

2,5mm

50

T = 11 x 25 mm

SS

A = 2.075 cm2

/m = 1.76 kg/mI y-y = 1.04 cm4

Z y-y = 0.92 cm3

r y-y = 0.71 cmI z-z = 5.32 cm4

Z z-z = 2.57 cm3

r z-z = 1.61 cm

HGPGPOhsiniFM htgneL.oN traP

SSGHGPOP63P3300 • • • • • •P3300T10 • • • • • •

P3300

41

21

2,5mm

SSHGPGPO

A = 2.32 cm2

/m = 1.91 kg/mI y-y = 1.19 cm4

Z y-y = 0.97 cm3

r y-y = 0.71 cmI z-z = 5.34 cm4

Z z-z = 2.59 cm3

r z-z = 1.51 cm

*180 kL/r < 250


L(mm) F

fFmax(kN) fmax(mm)

σ=175 N/mm2 f=1/200 L f=1/360 LF (kN)

F (kN) F (kN)250 5.425 0.45 - - 10.222500 2.708 1.81 - 2.080 9.761750 1.805 4.07 1.658 0.922 8.4271000 1.354 7.24 0.932 0.520 6.7691250 1.079 11.32 0.598 0.324 5.3761500 0.903 16.30 0.412 0.226 4.287*1750 0.775 22.19 0.304 - 3.463*200 0.677 28.99 0.226 - -

L(mm) F

fFmax(kN) fmax(mm)

σ=175 N/mm2 f=1/200 L f=1/360 LF (kN)

F (kN) F (kN)250 5.152 0.49 - - -500 2.576 1.97 - 1.819 -750 1.717 4.42 1.455 0.809 -

1000 1.288 7.87 0.819 0.455 -1250 1.030 12.29 0.524 0.291 -1500 0.859 17.70 0.364 - -1750 0.736 24.09 0.267 - -2000 0.644 31.46 - - -

T = 11 x 25 mm

P3301T10

41

41

2,5mm

SSHGPGPO

A = 4.09 cm2

/m = 3.53 kg/mI y-y = 6.42 cm4

Z y-y = 2.97 cm3

r y-y = 1.25 cmI z-z = 10.64 cm4

Z z-z = 5.14 cm3

r z-z = 1.61 cm

*180 kL/r < 250



HGL(mm) F

fFmax(kN) fmax(mm)

σ=175 N/mm2 f=1/200 L f=1/360 LF (kN)

F (kN) F (kN)250 16.632 0.26 - - 17.266500 8.316 1.03 - - 17.030750 5.544 2.31 - 4.991 16.599

1000 4.158 4.11 - 2.808 15.6671250 3.326 6.43 3.234 1.797 14.1561500 2.772 9.26 2.246 1.248 12.4781750 2.376 12.60 1.650 0.917 10.8992000 2.079 16.45 1.263 0.702 9.4962250 1.848 20.83 0.998 0.555 8.289*2500 1.663 25.71 0.809 0.449 7.250*2750 1.512 31.11 0.668 0.371 6.377*3000 1.386 37.02 0.562 0.312 -

hsiniFM htgneL.oN traPSSGHGPOP63••••••01T1033P

SSPGPOSpot Welded


CONDUIT & TRUNKING CAPACITY CHART

Cable FactorsSingle core PVC insulated cables in straight runs of conduit not exceeding 3m in length.

Type of Conductor Conductor cross-sectional area (mm²) FactorSolid 1.0 22Solid 1.5 27Solid 2.5 39Stranded 1.5 31Stranded 2.5 43Stranded 4.0 58Stranded 6.0 88Stranded 10.0 146

Conduit Capacity Factors (Exceeding 3M in Length) Straight One Bend Two Bends Three Bends Four Bends

Length Of Run (M) Conduit Diameter (mm)

16 20 25 32 16 20 25 32 16 20 25 32 16 20 25 32 16 20 25 32

1.0 - - - - 188 303 543 947 177 286 514 900 158 256 463 818 130 213 388 6921.5 - - - - 182 294 528 923 167 270 487 857 143 233 422 750 111 182 333 6002.0 - - - - 177 286 514 900 158 256 463 818 130 213 388 692 97 159 292 5292.5 - - - - 171 278 500 878 150 244 442 783 120 196 358 643 86 141 260 4743.0 - - - - 167 270 487 857 143 233 422 750 111 182 333 600 - - - -3.5 179 290 521 911 162 263 475 837 136 222 404 720 103 169 311 563 - - - -4.0 177 286 514 900 158 256 463 818 130 213 388 692 97 159 2925 529 - - - -4.5 174 282 507 889 154 250 452 800 125 204 3736 667 91 149 275 500 - - - -5.0 171 278 500 878 150 244 442 783 120 196 358 643 86 141 260 474 - - - -6.0 167 270 487 857 143 233 422 750 111 182 333 600 - - - - - - - -7.0 162 263 475 837 136 222 404 720 103 169 311 563 - - - - - - - -8.0 158 256 463 818 130 213 388 692 97 159 292 529 - - - - - - - -9.0 154 250 452 800 125 204 373 667 91 149 275 500 - - - - - - - -10.0 150 244 442 783 120 196 385 643 86 141 260 474 - - - - - - - -

Cable FactorsSingle core PVC insulated cables in straight runs of conduit exceeding 3m in length or in runs of any length incorporating bends or sets.

Type of Conductor Conductor cross-sectional area (mm²) FactorSolid or Stranded 1.0 16Solid or Stranded 1.5 22Solid or Stranded 2.5 30Solid or Stranded 4.0 43Solid or Stranded 6.0 58Solid or Stranded 10.0 105

Cable Spacing Factors

Cable Capacities Of Trunking

To determine the conduit size needed, multiply the quantities of each size of cable by the appropriate factor, compare the total with the conduit figures shown. EG. What size of conduit is required for 6 No. 4mm² cables in a three metre run with no bends? 6 x 58 = 348 So the nearest size of conduit with a factor greater than 348 is 20mm.

To determine the trunking size needed, multiply the quantities of each cable by the appropriate factor, and compare the total with the trunking capacity figures shown. Eg. What size of standard trunking is needed for 10 in number 35mm² cables and 16 in number 4mm² cables? The nearest size of standard trunking with a capacity factor greater than 1239.6 is 75 x 50mm

Conduit Factors Conduit Diameter (mm) Capacity Factor16 29020 46025 80032 1400

Standard Trunking Cable Factors Nominal Conductor Size mm² 1.5 Solid 1.5 Stranded 2.5 Solid 2.5 Stranded 4 6 10 16 25 35 50 70 95

Factor Copper or Aluminium 8.6 9.6 11.9 13.9 18.1 22.9 36.3 50.3 75.4 95 133 177 227

Standard Trunking Capacity Factors Trunking Size Capacity Factor Trunking Size Capacity Factor50mm x 50mm 1037 150mm x 75mm 474375mm x 50mm 1555 150mm x 100mm 639475mm x 75mm 2371 150mm x 150mm 9697100mm x 50mm 2091 200mm x 100mm 8572100mm x 75mm 3189 225mm x 150mm 14652100mm x 100mm 4252 300mm x 150mm 19607

(No. of Cables) 10 x 95 (Factor for 35mm² cable) = 950

(No. of Cables) 16 x 18.0 (Factor for 4mm² cable) = 289.6

Total Cable Factor = 1239.6



FO

212OBP

32OBP

CO

1009080706050403020100-10-20

2001901801701601501401301201101009080706050403020100

GENERAL CONVERSION TABLES

Common Conversion Factors

Temperature Conversion Chart

Measurements To Convert Into Multiply ByDISTANCE Inches Millimetres 25.4 Millimetres Inches 0.03937 Feet Metres 0.3048 Metres Feet 3.2808 Yards Metres 0.9144 Metres Yards 1.0936 Miles Kilometres 1.69093 Kilometres Miles 0.6214AREA Square Inches Square Millimetres 645.16 Square Millimetres Square Inches 0.00155 Square Yards Square Metres 0.8361 Square Metres Square Yards 1.196 Cubic Inches Cubic Centimetres 16.387 Cubic Centimetres Cubic Inches 0.06102WEIGHT Pounds Kilogrammes 0.4536 Kilogrammes Pounds 2.2046 Tons (2.240Lb) Kilogrammes 1,016.05 Kilogrammes Tons 0.0009842 Ounces Grammes 28.3495 Grammes Ounces 0.0353VOLUME Gallons Litres 4.5461 Litres Gallons 0.22OTHER Horsepower Kilowatts 0.7458 Kilowatts Horsepower 1.3408

°C °F °C2 °F3 °C4 °F5 °C6 °F70 32 26 78.8 52 125.6 78 172.41 33.8 27 80.6 53 127.4 79 174.22 35.6 28 82.4 54 129.2 80 1763 37.4 29 84.2 55 131 81 177.84 39.2 30 86 56 132.8 82 179.65 41 31 87.8 57 134.6 83 181.46 42.8 32 89.6 58 136.4 84 183.27 44.6 33 91.4 59 138.2 85 1858 46.4 34 93.2 60 140 86 186.89 48.2 35 95 61 141.8 87 188.610 50 36 96.8 62 143.6 88 190.411 51.8 37 98.6 63 145.4 89 192.212 53.6 38 100.4 64 147.2 90 19413 55.4 39 102.2 65 149 91 195.814 57.2 40 104 66 150.8 92 197.615 59 41 105.8 67 152.6 93 199.416 60.8 42 107.6 68 154.4 94 201.217 62.6 43 109.4 69 156.2 95 20318 64.4 44 111.2 70 158 96 204.819 66.2 45 113 71 159.8 97 206.620 68 46 114.8 72 161.6 98 208.421 69.8 47 116.6 73 163.4 99 210.222 71.6 48 118.4 74 165.2 100 21223 73.4 49 120.2 75 167 24 75.2 50 122 76 168.8 25 77 51 123.8 77 170.6


ATEX

HAZARDOUS AREA

ATEX is the term used when referring to the European Unions (EU) Directive 94/9/EC.

The ATEX Directive main objectives are to guarantee the free circulation of goods within the European Union by aligning the technical and legal requirements of the Member States.

The Directive Covers:• Equipment and products that have potential ignition sources• Protective Systems - products that control the effects of incipient explosions• Safety Devices - products that may be outside a potentially explosive atmosphere but that have an explosion safety function• Components - products that are intended to form parts of equipment or protective systems

The Directive only applies where there is equipment which introduces energy into the hazardous area such as electrical equipment which introduces electrical energy or mechanisms introducing mechanical energy. It is not intended to apply to locations where there is no equipment. Therefore, the interior of storage tanks or vessels would not be covered unless there was equipment present.

Equipment and protective systems used outside the hazardous area but which contributes to safety in the hazardous area (sometimes known as associated equipment) is also covered. This includes barriers for intrinsically safe circuits, control systems of explosion suppres-sion, inerting and decoupling systems.

ATEX 95 Directive 94/9/ECEquipment Classification

The directive does not use Zone numbers in the classification of hazardous areas, preferring to refer to their definitions (e.g. ‘An area where an explosive atmosphere occurs frequently or continuously’ for Zone 0) but it is useful to understand the classification system commonly used to describe areas where explosive atmospheres may occur. Usually, a series of zones based on the likelihood of presence of an explosive atmosphere are defined (the following are based on BS EN 60079-10: 2003):

Zone for gases, vapour and mists Zone for combusible dusts Conditions0 20 Explosive atmosphere will be present continuously1 21 Explosive atmosphere will be present some of the time (e.g. due to operational reasons)2 22 Explosive atmosphere may be present (e.g. in the event of a fault)

Equipment is selected on the basis of its suitability for use in these conditions. There is a sub-division which separates equipment for use in mines from all other equipment. The full list of categories are as follows:

Category DescriptionM1 Equipment intended for mining use and is required to remain functional in the presence of an explosive atmosphere.M2 Equipment intended for mining use, but is intended to be de-energised in the event of an explosive atmosphere.1G Non-mining equipment for use in Zone 02G Non-mining equipment for use in Zone 13G Non-mining equipment for use in Zone 21D Non-mining equipment for use in Zone 202D Non-mining equipment for use in Zone 213D Non-mining equipment for use in Zone 22

Under the ATEX directive (94/9/EC), any product intended for use in potentially explosive atmospheres must bear the ATEX “CE” mark and be affixed under the auspices of an EC Notified Body.

ATEX 137 Directive 99/92/EC/

The Directive covers the use of equipment in potentially explosive atmospheres and its aim is to establish minimum requirements for improving the safety and health of workers.

The article defines the:• Obligations of the employees regarding the prevention and protection against explosions• Assessment obligations with regards to the assessment of explosion risks• General obligations regarding the safety and health of worker• Requirements for explosion protection documents



DSEARThe Dangerous Substances and Explosive Atmospheres Regulations 2002

Gases, vapours, mists and dusts can all form explosive atmospheres with air.

The Dangerous Substances and Explosive Atmospheres Regulations 2002 (DSEAR) place duties on employers to eliminate or control the risks from explosive atmospheres in the workplace and uses Hazardous area classification to identify places where, because of the potential for an explosive atmosphere, special precautions over sources of ignition are needed to prevent fires and explosions.

Hazardous Area Definition: A place where an explosive atmosphere may occur in quantities that require special precautions to protect the health and safety of workers.

Non-Hazardous Area Definition: A place where an explosive atmosphere is not expected to occur in quantities that require such special precautions.

Special Precautions Definition: precautions to control potential ignition sources within a hazardous area, particularly in relation to the construction, installation and use of equipment.

Explosive Atmosphere Definition: a mixture of dangerous substances with air, under atmospheric conditions, in the form of gases, vapours, mist of dust in which, after ignition has occurred combustion spreads to the entire unburned mixture.

Atmospheric conditions Definition: are commonly referred to as ambient temperatures and pressures. That is to say temperatures of –20°C to 40°C and pressures of 0.8 to 1.1 bar.

ATEXATEX is the name commonly given to the two European Directives for controlling explosive atmospheres:

• Directive 99/92/EC (also known as ‘ATEX 137’ or the ‘ATEX Workplace Directive’) on minimum requirements for improving the health and safety protection of workers potentially at risk from explosive & atmospheres. (Regulations 7 & 11 of DSEAR)• Directive 94/9/EC (also known as ‘ATEX 95’ or ‘the ATEX Equipment Directive’) on the approximation of the laws of Members States concerning equipment and protective systems intended for use in potentially explosive atmospheres

Employer Duties under DSEARUnder the DSEAR regulations, employers have a specific duty to eliminate or control the risks from dangerous substances by:

1. Identifying Hazardous areas using the above definitions2. Further classify these Hazardous Areas into Zones, distinguishing between places that have a high chance of an explosive atmosphere occurring and those places where an explosive atmosphere may only occur in abnormal circumstances

Hazardous Area Zones:

Flammable Gases and Vapour’sZone 0 An area in which an explosive atmosphere is constantly present, or present for long periodsZone 1 An area in which an explosive atmosphere is likely to occur in normal operation (Rough Guide: 10 hours or more / per year but less than 1,000 hours / per year)Zone 2 An area in which an explosive atmosphere is not likely to occur in normal operation and if it occurs it will exist only for a short time. (Rough Guide: Less than 10 hours / per year)

Combustible DustsZone 20 An area in which combustible dust, as a cloud, is present continuously or frequently, during normal operation, in sufficient quantity to be capable of producing an explosive concentration of combustible dust in a mixture with airZone 21 An area, in which combustible dust, as a cloud, is occasionally present during normal operation, in a sufficient quantity to be capable of producing an explosive concentration of combustible dust in a mixture with airZone 22 An area, in which combustible dust, as a cloud, may occur infrequently and persist for only a short period, or in which accumulations of layers of combustible dust may give rise to an explosive concentration of combustible dust in a mixture with air

This classification determines the controls needed on potential sources of ignition that may be present or occur in that area BS EN 60079/10 – basic principles of area classification for gases and vapours BS EN 61241/3 – basic principles of area classification for dusts


Hazardous Area Equipment Selection Explained

The selection of electrical apparatus should be in accordance with the following: • Classification of the hazardous area • Temperature class or ignition temperature of the gas, liquid, vapour’s, mist, dust or fibre. • Where applicable, the gas, vapour or dust classification in relation to the group or subgroup of the electrical apparatus • External influences and ambient temperature

(Equipment and Protective Systems for Use in Potentially Explosive Atmospheres Regulations 1996 (as amended) - EPS)

Equipment Marking:Standardised marking identified equipment suitable for a specific location; • Ex symbol in a hexagonal – equipment is built to the requirements of EPS • Equipment category number • The letter G and/or D depending on whether it is intended of use in gas or dust atmospheres • T – temperature rating

Equipment CategoriesFlammable Gases and Vapour’s Combustible Dusts Equipment CategoryZone 0 Zone 20 Category 1 - equipment intended for high-risk areas where an explosive atmosphere is present long periodsZone 1 Zone 21 Category 2 - equipment intended for medium-risk areas where an explosive atmosphere may occur under normal operating conditionsZone 2 Zone 22 Category 3 - equipment intended for areas where an explosive atmosphere is only likely under abnormal circumstances

Apparatus Selection According To The Ignition Temperature Of Gas Or VapourThe equipment must be selected so that its maximum surface temperature will not reach the ignition temperature of any gas or vapour that may be present.

Temperature Class of Maximum Surface Temperature Ignition Temperature ofElectrical Apparatus of Electrical Apparatus Gas or VapourT1 450°C >450°CT2 300°C >300°CT3 200°C >200°CT4 135°C >135°CT5 100°C >100°CT6 85°C >85°C

If the marking of the electrical apparatus does not include an ambient temperature range, the apparatus is only for use within an ambient temperature range from -20°C to + 40°C.

Apparatus Selection According To Apparatus GroupingThe grouping of gases and vapour’s are classified into Group I and Group II categories.Group I is relevant to atmospheres containing firedamp (a mixture of gases, composed mostly of methane, found underground in mines).

Group II is intended for use in all other places with potentially explosive atmospheres. Group II electrical apparatus with types of pro-tection ‘d’ and ‘i’ are further subdivided into apparatus group IIA, IIB or IIC. Electrical apparatus with type of protection ‘n’ may also be subdivided if it contains certain devices or components.

Gas/Vapour Subdivision Apparatus Subgroup PermittedIIA (typical gas propane) IIA, IIB or IICIIB (typical gas ethylene) IIB or IICIIC (typical gases acetylene and hydrogen) IIC



Electrical Equipment ClassificationElectrical apparatus for use in hazardous areas needs to be designed and constructed in such a way that it will not provide a source of ignition. There are ten recognised types of protection for hazardous area electrical apparatus. Each type of protection achieves its safety from ignition in different ways and not all are equally safe. In addition to the equipment being suitable for the Gas Group and the Temperature Class required, the type of protection must be suitable for the zone in which it is to be installed. The different types of protection and the zones for which they are suitable are as follows:

Equipment Code Description Suitable for zones...Ex ia Intrinsic Safety ‘ia’ 0, 1, 2Ex ib Intrinsic Safety ‘ib’ 1,2Ex ic Intrinsic Safety ‘ic’ 2Ex d Flameproof protection 1,2Ex p Purge/Pressurized Protection 1,2Ex px Purge/Pressurized Protection ‘px’ 1,2Ex py Purge/Pressurized Protection ‘py’ 1,2Ex pz Purge/Pressurized Protection ‘pz’ 2Ex e Increased Safety 1,2Ex m Encapsulation 1,2Ex ma Encapsulation 0,1,2Ex mb Encapsulation 1.2Ex o Oil Immersion 1,2Ex q Sand / Powder (Quartz) Filling 1,2Ex n Type - n Protection 2Ex s Special Protection Normally 1 and 2

Equipment complying with European (CENELEC) standards will bear the code EEx.

IP RATINGFirst Number Meaning Second Number MeaningRefers to protection Refers to protectionagainst solids against liquids

0 No protection 0 No protection

1 Protected against solid objects over 50mm 1 Protected against water falling (e.g. accidental touch by the hand) vertically

2 Protected against solid objects over 12mm 2 Protected against direct sprays from up (e.g. accidental touch by the finger) to 15 degrees from vertical

3 Protected against solid objects over 2.5mm 3 Protected against direct sprays up to 60 (e.g tools, wires) degrees from vertical

4 Protected against solid objects over 1mm 4 Protected against sprays from all directions. (e.g. small wires) Limited ingress permitted

5 Protected against dust – limited ingress 5 Protected against low pressure jets of water (no harmful deposit) from all directions. Limited ingress permitted.

6 Totally protected against all dust 6 Protected against strong jets of water. Limited ingress permitted E.g. acceptable for use on shipdecks

7 Protected against temporary affects of immersion between 15cm and 1m, for 30 minutes

8 Protected against long periods of immersion under pressure


IECEx SchemeThe objective of the IECEx Scheme (International Trade of Electrical Equipment used in Explosive Atmospheres) is to facilitate international trade in electrical equipment intended for use in potentially explosive atmospheres by eliminating the need for multiple national certification. The IECEx Scheme provides a means for manufacturers to obtain Certificates of Conformity that will be accepted at national level in all participating countries. A Certificate of Conformity may be obtained from any certification body accepted into the scheme. The objective of the IECEx Scheme is world-wide acceptance of one standard, one certificate, and one mark.

The Ex scheme applies to manufacturers of:• Electrical apparatus for explosive gas atmospheres• Electrical apparatus for the detecting and measurement of flammable gases• Electrical products such as switches, outlets and outlet boxes, circuit breakers, electric motors, and lighting used in hazardous environments

The obvious benefits of the IECEx scheme are:• Reduced testing and certification costs to manufacturer• Reduced time to market• International confidence in the product assessment process• One international database listing• Maintaining international confidence in equipment and services covered by iecex certification

BackgroundIECEx is a certification scheme championed by the IEC (www.iec.com) , and it is fast becoming the preferred route for international safe certification of products for use within all hazardous areas.

The IEC test report provides detail not included within an ATEX certificate and can be locally ratified to overcome any destination market Legislative difficulties that may arise.

In contrast to ATEX, IECEx was designed from the outset as an ISO/IEC Type 5 Certification Scheme, employing a single third party (The IECEx Certification Body) to combine all aspects of design evaluation and production control before issuing a certificate.

IECEx Relationship with ATEXATEX is a mandatory legal requirement within Europe. Therefore the IECEx certification is complimentary to the ATEX standard, making the choosing of equipment that has compliance to both standards advantageous if the final destination is outside the EU.

IECEx and ATEX marking differs and dual marking is becoming increasingly common. Dual marking enables products to gain an equal acceptance status in the countries signed up to the IECEx scheme as they currently receive in Europe.

The FutureThe IECEx scheme is a very positive step towards a world certification system.However, while total global harmonisation is still some way off, more and more countries are adopting this international certification scheme.

Many manufacturers have acknowledged this shift and have begun adding IECEx compliance to their list of approvals.

Countries Participating in the IECEx Scheme

AustraliaCanadaChinaCzech RepublicDenmarkFinland

FranceGermanyHungaryIndiaItaly

JapanKoreaNetherlandsNew ZealandNorway

RomaniaRussiaSerbia & MontenegroSingaporeSlovenia

South AfricaSwedenSwitzerlandUKUSA



Ingress Protection Reference ChartEN 60529 outlines an international classification system for the sealing effectiveness of enclosures of electrical equipment against the intrusion into the equipment of foreign bodies (i.e. tools, dust, fingers) and moisture. This classification system utilises the letters “IP” (“Ingress Protection”) followed by two or three digits. (A third digit is sometimes used. An “x” is used for one of the digits if there is only one class of protection; i.e. IPX4 which addresses moisture resistance only).

Degree of Protection - First DigitThe first digit of the IP code indicates the degree that persons are protected against contact with moving parts (other than smooth rotating shafts, etc.) and the degree that equipment is protected against solid foreign bodies intruding into an enclosure.

First Number Test 0 No special protection1 Protection from a large part of the body such as a hand (but no protection from deliberate access); from solid objects greater than 50mm in diameter2 Protection against fingers or other object not greater than 80mm in length and 12mm in diameter3 Protection from entry by tools, wires, etc., with a diameter of thickness greater than 1.0mm 4 Protection from entry by solid objects with a diameter or thickness greater than 1.0mm 5 Protection from the amount of dust that would interfere with the operation of the equipment6 Dust tight

Degree of Protection - Second DigitThe second digit indicates the degree of protection of the equipment inside the enclosure against the harmful entry of various forms of moisture (e.g. dripping, spraying, submersion, etc.)

First Number Test 0 No special protection1 Protected against vertically falling drops of water or condensation 2 Protected against falling drops of water, if the case is disposed up to 15 degrees from vertical3 Protected against sprays of water from any direction, up to 60 degrees from the vertical4 Protected against splash water from any direction -limited ingress permitted5 Protected against low pressure water jets from any direction. Limited ingress permitted6 Protected against high pressure water jets from any direction. Limited ingress permitted7 Protected against short periods of immersion in water - between 15cm and 1m8 Protected against long, durable periods of immersion in water, under pressure

Submersion depth and time must be specified by the end-user. The requirement must be more onerous than IP67.


INGRESS PROTECTION CODE SYMBOLS



Bathroom Zones ExplainedZone 0Zone 0 for a bathroom is the area inside the bath.Zone 0 for a shower room is the area inside the shower basin. If there is no shower basin, zone 0 is 10cm high from the finished floor level and extends to 1.2m around the fixed shower head.

Zone 1Zone 1 for a bathroom is the same width as zone 0 (the width of the bath) extending to 2.25m above the finished floor level.Zone 1 for a shower room is 2.25m from the finished floor level or the height of the fixed shower head from the finished floor level if more than 2.25m, and the width of the shower basin. If the shower has no basin then zone 1 extends to 1.2m around the fixed shower head.Zone 1 does not include zone 0.The space under the bath tub or shower basin is considered to be zone 1. However, if the space under the bath or shower basin is onlyaccessible with a tool, it is considered to be outside the zones.

Zone 2Zone 2 for a bathroom is the same height as zone 1 (2.25m) extended to 0.6m around the bath.Zone 2 for a shower room is the same height as zone 1 extended to 0.6m around the shower basin. If there is no shower basin zone 2 is replaced by zone 1 extended to 1.2m around the fixed shower head

The extent of the zones in a bath or shower room can be limited by floors, ceilings and walls. For more detailed information see BS 7671 diagrams 701.1 & 701.2. Any electrical equipment installed on the surface of floors, ceilings and walls that limit a zone is subject to therequirements of that zone.

RCDs are required for all circuits in locations that contain a bath or shower. The requirements for local supplementary bonding have been relaxed if certain conditions are met.

Protection And IP RatingsTypical electrical items which are marked with IP numbers include:• Extractor fans • Electrical shower units• Lighting • Shower pumps• Heaters

Shaver power points are not IP rated, however, if they comply with BS EN 60742 Chapter 2, Section 1, they can be located in zone 2 (or beyond) providing they are unlikely be be the subject of direct spray from any shower.

As well as IP numbers, items may be classed as PELV or SELV.

Protective Extra-Low Voltage (PELV) - As the name suggests, the item uses low voltage but it is connected to earth.Separated Extra-Low Voltage (SELV) - Again a low voltage system but the output is isolated from the input.

Standard electrical wall fittings (such as wall sockets, flexible cord outlets and fused switches etc) are not IP rated so cannot be installed within zones 0, 1 or 2. No standard socket outlets are allowed within 3m of the outer limit of zone 1, and any socket fitted would be on a RCD protected circuit (as per Protection above).

Use of EquipmentAny electrical item approved for use in a zone may be used in another zone with a higher number, but not in a lower number zone.

Zone 0 Requires electrical products to low voltage (max. 12 volts) and be IPX7 (the mechanical protection is unimportant).Zone 1 Requires electrical products to be IPX4 or better, or SELV with the transformer located beyond zone 2.Zone 2 Requires electrical products to be IPX4 or better, or SELV with the transformer located beyond zone 2.Beyond zone 2 When the size of bathroom extends beyond zone 2, portable equipment is allowed, however they should be positioned such that that their flex length does not enable them to be used in zone 2.

Zone Diagram for Bath Areas

Zone Diagram for Shower Areas

Please note that this guide is only to be used as general reference. Please ensure that you are fully aware that any electrical and installation work must be carried out in accordance with IEE Wiring Regulations, The Building Regulations and any further compliancy that might be required. If in any doubt, consult proffesional help from a qualifed individual or company.


Raxton Part Numberin System

SELECTION CHARTS

DIGIT 1+2 CODE

ADAPTORS

M-F HEX AB

M-F ROUND AJ

M-M AR

F-F HEX AU

F-F ROUND AX

REDUCERSM-F HEX BB

M-F ROUND BJ

PLUGS

RX CB

TAMPERPROOF CF

HEX HEAD CK

DOME HEAD CQ

SLOTTED CS

DRAIN CV

INSULATING AND

EARTHING

INSULATED M x F DB

INSULATED M x M DD

INSULATED F x F DE

EARTH LEAD M x F DG

EARTH PLATE DK

EARTH TAG DM

CABLE RETENTION

GLAND EB

STOPPER BOX M-F EG

STOPPER BOX F-F EK

ADAPTING AIDS

UNION M-F FB

UNION F-F FL

UNION M-M FE

RIGHT ANGLE M-F FG

RIGHT ANGLE F-F FN

RIGHT ANGLE M-M FK

LOCKING

LOCKNUTS GA

LOCKRINGS GB

SERRATED WASHERS GC

LOCKNUT CASTELLATED GD

I.P. AIDS

WASHERS HA

O RINGS HB

SHROUD HC

ACCESSORIES

MALE BUSH LONG JA

MALE BUSH SHORT JB

FEMALE BUSH JC

NIPPLE JD

NIPPLE LONG JE

NIPPLE BARREL JF

COUPLER ROUND JG

COUPLER HEX JH

COUPLER FLANGE JJ

DIGIT 3 CODE

BRASS A

ALUMINIUM B

STEEL C

COPPER & NON-ASB

D

STAINLESS STEEL

E

PVC F

NYLON BLACK G

NYLON GREY H

SILICONE J

NYLON BLUE K

LEAD L

GLASS FILLED NYLON

M

NYLON 66 N

RED FIBRE U

TEFLON P

EPDM Q

NYLON WHITE R

SPECIAL S

MALE DIGIT 4 + 5 FEMALE DIGIT 6 + 7

THREAD REFERENCES AS TABLE BELOW

ISOMETRIC NPT BSP T BSP P

SIZE CODE SIZE CODE SIZE CODE SIZE CODE

M6 01 1/2" 42 1/2" 52 62

M8 02 3/4" 43 3/4" 53 63

M10 03 1" 44 1" 54 64

M12 04 1 1/4" 45 1 1/4" 55 65

M16 11 1 1/2" 46 1 1/2" 56 66

M20 12 2" 47 2" 57 67

M22 07 2 1/2" 48 2 1/2" 58 68

M24 08 3" 49 3" 59 69

M25 13 3 1/2" 86 4" 79 89

M28 09 4" 87 SPECIAL 50 60

M32 14 5" 88

Normally male thread is specified first (4+5) Female thread second (6+7) with items then both M-M or F-F sets of digits will be used

Pg & ET thread components are still available please consult sales

department for advice.

M38 05

M40 15

M50 16

M63 17

M75 18

M80 80

M90 81

M100 82

SPECIAL 10 SPECIAL 40

DIGIT 8 APPROVALS

Atex EExde A

Atex EExd D

Atex EExe E

Mining Group 1 M

CSA © Exd11C J

CSA (US) Class 1 Zone 1 K

AExd 11C L

IECEx Exd 1/11C N

IECEx Exe 1/11 P

Gost Exde 11CU T

Gost Exde 1/11CU U

Gost Exd11CU V

Gost Exe11U W

EXAMPLES

PART NUMBER Adaptor Brass 1/2”NPT M20F EExd AB A 42 12 D

Reducer GF Nylon M50 M 1”NPT F EExe BB M 16 44 E = BBM1644E

= ABA4212D

Locknut Brass - M63 - GA A 00 17 � = GAA0017

Hex Head Plug ST/ST 2”BSPT - GOST EExd 11C U CK E 57 00 V = CKE5700V

All codes marked cover products which are not certified or have any associated approvals

RIECEx Exd/ExeDual Certified



Raxton Thread Dimensions Chart

16.93 1.5 11.0 16 M16

16.93 1.5 15.0 20 M20

16.93 1.5 20.5 25 M25

16.93 1.5 26.8 32 M32

16.93 1.5 33.5 40 M40

16.93 1.5 44.0 50 M50

16.93 1.5 55.2 63 M63

16.93 1.5 66.7 75 M75

14 1.81 14.3 21.34 1/2” NPT

14 1.81 20.5 26.67 3/4” NPT

111/2 2.20 26.8 33.40 1” NPT

111/2 2.20 33.5 42.16 1 1/4” NPT

111/2 2.20 41.0 48.26 1 1/2” NPT

111/2 2.20 54.0 60.33 2” NPT

8 3.175 64.5 73.03 2 1/2” NPT

8 3.175 79.0 88.90 3” NPT

8 3.175 90.0 101.60 3 1/2” NPT

8 3.175 101.0 114.30 4” NPT

14 1.81 P T 15.5 14.3 20.96 1/2” BS P

14 1.81 17.5 16.3 22.91 5/8” BSP

14 1.81 21.5 20.0 26.44 3/4” BSP

11 2.31 26.8 25.5 33.25 1” BSP

11 2.31 35.0 33.0 41.91 1 1/4” BSP

11 2.31 41.0 39.0 47.80 1 1/2” BSP

11 2.31 53.0 50.0 59.61 2” BSP

11 2.31 66.0 62.0 75.18 2 1/2” BSP

11 2.31 77.0 73.0 87.88 3” BSP

CERTIFIED Reducers Adaptors Not Certi�ed

MALE THREAD

FEMALE THREAD

THREADSPER INCH

PITCH BORE SIZEMAX

MAJORDIAMETER

MMSIZE

M16

/ 5 /

8” E

T

M20

/ 3 /

4” E

T

M25

/ 1”

ET

M32

/11 /

4” E

T

M40

/11 /

2” E

T

M50

/ 2”

ET

M63

/ 21

/2”

ET

M75

/ 3”

ET

3 /4”

NPT

/BSP

1” N

PT/B

SP

11/4

” N

PT/B

SP

11/2

” N

PT/B

SP

2” N

PT/B

SP

21/2

” N

PT/B

SP

31/2

” N

PT/B

SP

3” N

PT/B

SP

4” N

PT/B

SP

1 /2”

NPT

/BSP


Cable Gland & Cable Cleat Selector Chart

Gland Type

Conductor Size (mm2) No. Of Cores Indoor - BW Gland Outdoor - CW Gland Cleat Size

1.5 2 20S 20/16 5 3 20S 20/16 6 4 20S 20S 6 7 20S 20S 7 12 20 20 8 19 25 25 10 27 32 32 11 37 32 32 12 48 32 32 142.5 2 20S 20S 6 3 20S 20S 6 4 20S 20S 6 7 20 20 7 12 25 25 9 19 25 25 11 27 32 32 12 37 32 32 14 48 40 40 164 2 20S 20S 6 3 20S 20S 6 4 20 20 7 7 20 20 8 12 25 25 10 19 32 32 12 27 40 40 146 2 20S 20S 7 3 20 20 7 4 20 20 810 2 20 20 8 3 25 25 8 4 25 25 816 2 25 25 9 3 25 25 10 4 25 25 1125 2 25 25 9 3 32 32 10 4 32 32 1235 2 32 32 12 3 32 32 12 4 32 32 1450 2 32 32 12 3 32 32 12 4 32 32 14

Warning ‐ Whilst all due care has been taken in compiling the above chart, it is for guidance only.Cable sizes must be checked prior to gland selection

Motor CurrentAC Motors - full load current tables (1450rpm approx.), (provided as a guide to the selection of suitable control gear).The tables are based on motors of approximately 1450rpm of average efficiency and power factor. Motors of higher speed usually take a lower current than that shown in the table; while motors of lower speed usually take higher current. Wide variations from these figurescan arise, especially on single phase motors, and engineers should, whenever possible, determine the actual f.l.c from the motor rating plate in each case.

Single Phase Motors

Approx. F.L.C. At Line Voltage

Motor Rating HP 110V ac 220V ac 240V ac0.07 kW 1/12 2.4 1.2 1.10.1 kW 1/8 3.3 1.6 1.50.12 kW 1/6 3.8 1.9 1.70.18 kW 1/4 4.5 2.3 2.10.25 kW 1/3 5.8 2.9 2.60.37 kW 1/2 7.9 3.9 3.60.56 kW 3/4 11 5.5 50.75 kW 1 15 7.3 6.71.1 kW 1.5 21 10 91.5 kW 2 26 13 122.2 kW 3 37 19 173 kW 4 49 24 223.7 kW 5 54 27 254 kW 5.5 60 30 275.5 kW 7.5 85 41 387.5 kW 10 110 55 50

Three Phase Motors Approx. F.L.C. At Line Voltage

Motor Rating HP 220V ac 240V ac 380V ac 415V ac 550V ac0.1 kW 1/8 0.7 0.6 0.4 0.4 0.30.12 kW 1/6 1 0.9 0.5 0.5 0.30.18 kW 1/4 1.3 1.2 0.8 0.7 0.40.25 kW 1/3 1.6 1.5 0.9 0.9 0.60.37 kW 1/2 2.5 2.3 1.4 1.3 0.80.56 kW 3/4 3.1 2.8 1.8 1.6 1.10.75 kW 1 3.5 3.2 2 1.8 1.41.1 kW 1.5 5 4.5 2.8 2.6 1.91.5 kW 2 6.4 5.8 3.7 3.4 2.62.2 kW 3 9.5 8.7 5.5 5 3.53.0 kW 4 12 11 7 6.5 4.73.7 kW 5 15 13 8 8 64.0 kW 5.5 16 14 9 8 65.5 kW 7.5 20 19 12 11 87.5 kW 10 27 25 16 15 119.3 kW 12.5 34 32 20 18 1410 kW 13.5 37 34 22 20 1511 kW 15 41 37 23 22 1615 kW 20 64 50 31 28 2118 kW 25 67 62 39 36 2622 kW 30 74 70 43 39 3030 kW 40 99 91 57 52 4137 kW 50 130 119 75 69 5045 kW 60 147 136 86 79 5955 kW 75 183 166 105 96 7275 kW 100 239 219 138 125 9590 kW 125 301 269 170 156 117110 kW 150 350 325 205 189 142130 kW 175 410 389 245 224 169150 kW 200 505 440 278 255 192



INDEXAbandonment Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Actuators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134-135

Adaptors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-41

Adhesives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Alarm - Beacons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146-147

Alarm - Signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146

Alarm - Sounders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146-147

Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146-147

Anchor Resin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

Anchor Setting Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Anchors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87-88

Area Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103

Auger Bits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

Basket Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53-54

Beacons - Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146-147

Bulk Heads - Hazardous Area Zone 1 . . . . . . . . . . . . . . . . . . . . . .99-100

Bulk Heads - Hazardous Area Zone 2 . . . . . . . . . . . . . . . . . . . . . . . . . 101

Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-18Cable - Abandonment Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Cable - Armoured Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-17

Cable - Armoured Power & Control . . . . . . . . . . . . . . . . . . . . . . . . . 9-17

Cable - Banding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Cable - Banding Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Cable - Cleats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Cable - Fire Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Cable - Fixings Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Cable - General Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9

Cable - Gland Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-42

Cable - Instrumentation - Armoured . . . . . . . . . . . . . . . . . . . . . . . . 9-11

Cable - Instrumentation - Unarmoured . . . . . . . . . . . . . . . . . . . . . 11-12

Cable - Insulated Joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Cable - Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-21

Cable - Multicore Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-14

Cable - Off-shore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-16

Cable - Rubber Flexible . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Cable - Tie Mounts - Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Cable - Tie Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Cable - Ties - Multi-Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Cable - Ties - Self Locking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Cable - Ties - Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23-24

Cable - Ties - Stainless Steel Coated . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Cable - Tri-Rated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Cable Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-28Cable Basket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53-54

Cable Glands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27-42Cable Glands - Adaptors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-41

Cable Glands - CMP Industrial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-31

Cable Glands - Hawke Hazardous Area . . . . . . . . . . . . . . . . . . . . . 31-34

Cable Glands - Hawke Industrial . . . . . . . . . . . . . . . . . . . . . . . . . . . 34-35

Cable Glands - Hawke North American Series . . . . . . . . . . . . . . 36-37

Cable Glands - Hazardous Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31-40

Cable Glands - Industrial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-39

Cable Glands - North American . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36-37

Cable Glands - Peppers Hazardous Area . . . . . . . . . . . . . . . . . . . . 35-36

Cable Glands - Peppers Industrial . . . . . . . . . . . . . . . . . . . . . . . . . . 37-38

Cable Glands - Reducers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-42

Cable Glands - Stopping Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41-42

Cable Glands - Wiska Hazardous Area . . . . . . . . . . . . . . . . . . . . . . . . . 40

Cable Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Cable Jointing Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Cable Ladder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Cable Ladder Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44-47

Cable Ladder - GRP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Cable Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43-68Cable Rollers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Cable Sealing Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69-73Cable Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Cable Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47-48

Cable Tray Accessories - Unistrut . . . . . . . . . . . . . . . . . . . . . . . . . . . 49-51

Cable Tray Accessories - Vantrunk . . . . . . . . . . . . . . . . . . . . . . . . . . 51-53

Cable Tray - uPVC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Cable Trunking & Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64-65

Cameras - Intrinsically Safe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148

Cavity Fixings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

Cavity Screw Anchors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Channel Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55-58

Channel - Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Circuit Breakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124-126

Columns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122

Conduit - Flexible Pre Galv & Accessories . . . . . . . . . . . . . . . . . . . 58-61

Conduit - Flexible Pre Galv Coated & Accessories . . . . . . . . . . . 58-61

Conduit - Steel & Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61-64

Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188-189

Consumer Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157-161

Contact Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130-132

Contactors - Motor Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127-131

Control Devices - Control Stations . . . . . . . . . . . . . . . . . . . . . . 131-132

Control Devices - Emergency Stops . . . . . . . . . . . . . . . . . . . . . 132-133

Control Devices - Enclosures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133

Control Devices - Pendant Control . . . . . . . . . . . . . . . . . . . . . . . . . . . 131

Control Devices - Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133-138

sales@rm-electrical .com 222

INDEX

www .rm-electrical .com223

Control Stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131-132

Controllers - Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151-153

Controllers - Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151

Critchley Markers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Distribution Boards - Single Phase . . . . . . . . . . . . . . . . . . . . . . 162-171

Distribution Boards - Three Phase . . . . . . . . . . . . . . . . . . . . . . . 162-172

Distribution Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162-172

Drill Bits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

Drives - Variable Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144

Duct Sealing Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70-73

Earth Bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Earth Rod Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Earth Rods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26-27

Earthing Equipment & Accessories . . . . . . . . . . . . . . . . . . . . . . . . . 26-27

Earthing Inspection Pits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Emergency Stops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132-133

Enclosed Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176-177

Enclosures - Control Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75-79

Enclosures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75-83

Enclosures - Modular . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177-178

Enclosures - Moulded Consumer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177

Enclosures - RCCB Incomer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159-160

Enclosures - Split Load Consumer . . . . . . . . . . . . . . . . . . . . . . . 157-161

Enclosures - Steel Consumer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156-161

Enclosures - Switch Disconnector . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164

Enclosures & Junction Boxes . . . . . . . . . . . . . . . . . . . . . . . . . 74-85Equipment - Intrinsically Safe . . . . . . . . . . . . . . . . . . . . . . . . . . . 148-150

Extension Leads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155

Fixings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86-97Flat Bits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96

Flexible Conduit - Pre Galv & Accessories . . . . . . . . . . . . . . . . . . 58-61

Flexible Conduit - Pre Galv Coated & Accessories . . . . . . . . . . . 58-61

Floodlights - Hazardous Area . . . . . . . . . . . . . . . . . . . . . . . . . . . 102-106

Floodlights - Industrial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106-109

Fluorescent - Recessed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120

Fluorescent Luminaires - Hazardous Area Zone 1 . . . . . . . . 111-115

Fluorescent Luminaires - Hazardous Area Zone 2 . . . . . . . . 115-118

Fluorescent Luminaires - Industrial . . . . . . . . . . . . . . . . . . . . . 109-110

Fuse Combination Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182

Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192

Galvafroid & Spray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Garage Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159

Glands - Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-42

Glands - Hazardous Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31-40

Glands - Industrial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-39

Glands - North American . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36-37

High Bay Luminaires - Hazardous Area . . . . . . . . . . . . . . . . . . . . . . . 118

Holesaws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96

Indictors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135

Inspection Pits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Installation Switches - Ex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183

Isolators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140-142

Jack Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Junction Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84-85

Junction Boxes - Ex D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Junction Boxes - Ex E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84-85

Junction Boxes - Fully Populated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Junction Boxes - Industrial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Key Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134-136

Lamp - Hand - Intrinsically Safe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149

Laser Meter - Intrinsically Safe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148

Level Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151-153

Lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98-122Lighting - Area Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103

Lighting - Bulk Heads Hazardous Area Zone 1 . . . . . . . . . . . . .99-100

Lighting - Bulk Heads Hazardous Area Zone 2 . . . . . . . . . . . . . . . . 101

Lighting - Floodlights Hazardous Area Zone 1 . . . . . . . . . . . 102-104

Lighting - Floodlights Hazardous Area Zone 1 . . . . . . . . . . . 105-106

Lighting - Floodlights Industrial . . . . . . . . . . . . . . . . . . . . . . . . 106-109

Lighting - Fluorescent - Recessed . . . . . . . . . . . . . . . . . . . . . . . . . . . 120

Lighting - Fluorescent Luminaires Hazardous Area Zone 1 . . . 111-115

Lighting - Fluorescent Luminaires Hazardous Area Zone 2 . . . 115-118

Lighting - Fluorescent Luminaires Industrial . . . . . . . . . . . . . 109-110

Lighting - High Bay Luminaires Hazardous Area . . . . . . . . . . . . . . 118

Lighting - Marine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118-119

Lighting - Navigation Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . 118-119

Lighting - Recessed Fluorescent Hazardous Area . . . . . . . . . . . . . 120

Lighting - Site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120

Lighting - Well Glass Luminaires Hazardous Area . . . . . . . . . . . . . 121

Lighting Columns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122

Lighting Trunking & Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . 64-65

Limit Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140

Load Break Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165

MCB’S - Motor Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124-126

MCB’S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158-175

MCCB’S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179-181

Measuring & Control Equipment . . . . . . . . . . . . . . . . . . . . . . . . 151-153

Mini Contactors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127

Mobile Phone - Intrinsically Safe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150

Modular Enclosures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177-178

Motor Control Gear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123-144Motor Starters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138-140

sales@rm-electrical .com 224

Mounting Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193

MPCB’S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126

Navigation Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118-119

Nuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

Panel Boards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178-182

Pendant Control Stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131

Pilot Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136

Pipe Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70-71

Plugs - Hazardous Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194

Plugs - Industrial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195-196

Plugs & Sockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194-196

Power Supply Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154

Pump Station Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151

Push Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132-137

PVC Cable Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

RCBO’s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158-175

RCCB’s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164-174

RCCM - Motor Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126

Recessed Fluorescent - Hazardous Area . . . . . . . . . . . . . . . . . . . . . . 120

Reducers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40-42

Relays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128-131

Relays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143-144

Roofing Nuts & Bolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

Rotary Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141

Rotary Switch Disconnectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175

Safety Switches - Ex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183

Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93-94

Sealing System Frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72-73

Selector Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135-138

Set Bolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

Set Screws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

Setting Tool - Screw Anchor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

Signal - Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146-147

Signalling Equipment - Fire & Industrial Areas . . . . . . . . . . . . . . . . 146

Signalling Equipment - Hazardous Area . . . . . . . . . . . . . . . . . . . . . . 147

Silicones & Sealants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Site Lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120

Sockets - Hazardous Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194

Sockets - Industrial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195-196

Sockets & Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194-196

Sounders - Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146-174

Specialist & Hazardous Area Equipment . . . . . . . . . . . . .145-155Spider Balls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155

Split Load Enclosures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157-161

Spring Toggles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

Square Plate Washers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

Starters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138-140

Steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96

Stopping Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41-42

Studding Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

Switch Disconnectors - Motor Control . . . . . . . . . . . . . . . . . . 125-142

Switch Disconnectors - Enclosed . . . . . . . . . . . . . . . . . . . . . . . 164-175

Switch Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169-182

Switch Mode Power Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154

Switches - Limit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140

Switches - Motor Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134-138

Switches - Hazardous Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183

Switchgear & Distribution . . . . . . . . . . . . . . . . . . . . . . . . . .156-183

Tap Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .197-221

Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185-190

Terminals - Clamping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185-186

Terminals - Cutting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186

Terminals - Push In . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187

Terminals - Rail Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185-186

Terminals - Screw Clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185-186

Terminals - Screw Connection . . . . . . . . . . . . . . . . . . . . . . . . . . 188-189

Terminals - Tension Clamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190

Terminals & Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . .176-182

Thickness Gauge - Intrinsically Safe . . . . . . . . . . . . . . . . . . . . . . . . . . 149

Thread Converters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

Threaded Rod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

Through Bolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

Timers - Motor Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144

Tools - Banding & Strapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23-24

Tools - Cable Tie Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Torch - Intrinsically Safe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150

Transducers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152

Transformers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155

Transits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69-73

Trunking - Lighting & Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . 64-65

Unifoot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57-58

Variable Speed Drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144

Washers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91-92

Wedge Nuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

Well Glass Luminaires - Hazardous Area . . . . . . . . . . . . . . . . . . . . . . 121

Wire Basket Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53-54

Wire Ducting & Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66-68

Wiring Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192-186

Wiring Accessories & Ancillaries . . . . . . . . . . . . . . . . . . . .191-196

Xox Bolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

MANUFACTURER INDEX


Manufacturer Section Pages

3M Cable Accessories 19-28

ABB Motor Control Gear 123-144

ABB Switchgear & Distribution 156-183

ABB Terminals & Connectors 184-190

Aqua Signal Lighting 98-122

Aquafax Wiring Accessories & Ancillaries 191-196

ATX Lighting 98-122

Bandit Cable Accessories 19-28

Beta Duct Cable Management 43-68

Bussmann Wiring Accessories & Ancillaries 191-196

Cablofil Cable Management 43-68

CEAG Enclosures & Junction Boxes 74-85

CEAG Lighting 98-122

CEAG Switchgear & Distribution 156-183

CEAG Wiring Accessories & Ancillaries 191-196

Chalmit Lighting 98-122

CMP Cable Glands 29-42

CorDex Instuments Specialist & Hazardous Equipment 145-155

CSD Sealing Systems Cable Sealing Systems 69-73

Dialight Lighting 98-122

E2S Specialist & Hazardous Equipment 145-155

Eastern Transformers & Equipment Specialist & Hazardous Equipment 145-155

Eaton Switchgear & Distribution 156-183

Ecom Specialist & Hazardous Equipment 145-155

Feel Enclosures & Junction Boxes 74-85

Finder Motor Control Gear 123-144

Flexicon Cable Management 43-68

Furse Cable Accessories 19-28

Gewiss Switchgear & Distribution 156-183

Gewiss Wiring Accessories & Ancillaries 191-196

Glamox Lighting 98-122

Hadar Lighting 98-122

Hager Switchgear & Distribution 156-183

Hawke Cable Glands 29-42

Hawke Enclosures & Junction Boxes 74-85

Industrial Lighting Systems UK Lighting 98-122

Kopex Cable Management 43-68


Manufacturer Section Pages

Lewden Palazzoli Wiring Accessories & Ancillaries 191-196

Mennekes Wiring Accessories & Ancillaries 191-196

Metsec Cable Management 43-68

Moeller Motor Control Gear 123-144

Panduit Cable Accessories 19-28

Partex Cable Accessories 19-28

Pemsa Cable Management 43-68

Peppers Cable Glands 29-42

Prysmian Cable Accessories 19-28

Pulsar Specialist & Hazardous Equipment 145-155

Raxton Cable Glands 29-42

Red Arrow Lighting 98-122

Rittal Enclosures & Junction Boxes 74-85

Roxtec Cable Sealing Systems 69-73

Salzer Motor Control Gear 123-144

Salzer Switchgear & Distribution 156-183

Schneider - Mita Cable Management 43-68

Schneider - Sarel Enclosures & Junction Boxes 74-85

Schneider - Telemecanique Motor Control Gear 123-144

Schneider - Merlin Gerin Switchgear & Distribution 156-183

Siemens Specialist & Hazardous Equipment 145-155

SWA Cable Accessories 19-28

Thorn Lighting 98-122

Trench Cable Management 43-68

Tyco Electronics Cable Accessories 19-28

Unifoot Cable Management 43-68

Unistrut Cable Management 43-68

Vantrunk Cable Management 43-68

Wago Terminals & Connectors 184-190

Weidmüller Enclosures & Junction Boxes 74-85

Weidmüller Specialist & Hazardous Equipment 145-155

Weidmüller Terminals & Connectors 184-190

Wirefield Lighting 98-122

Wiska Cable Glands 29-42

Wiska Cable Accessories 19-28

Wiska Wiring Accessories & Ancillaries 191-196

Wylex Switchgear & Distribution 156-183

005

Head Office and AccountsUnit 1 & 2, 362A Spring Road, SholingSouthampton, Hampshire SO19 2PB

Tel: 023 8034 1444 Fax: 023 8044 4366Email: [email protected]

R&M Exports DivisionUnit 1 & 2, 362A Spring Road, Sholing,

Southampton Hampshire SO19 2PBTel: 023 8068 5668 Fax: 023 8068 5673

Email: exports @rm-electrical.com

R&M Marine DivisionUnit 1, Central Trading Estate

Marine Parade, Southampton SO14 5JPTel: 023 8023 1800 Fax: 023 8023 1818Email: [email protected]

R&M Portsmouth BranchBuilding 2/017,PP128, HM Naval Base

Portsmouth PO1 3NJTel: 023 9285 1305 Fax: 023 9285 1553Email: [email protected]

R&M Swansea BranchUnit 4 & 5, Charnwood Court, Viking Way

Winch Wen, Swansea SA1 7DATel: 01792 796 333 Fax: 01792 796 888

Email: [email protected]

R&M Electrical Group Limited (Caspian)5th Floor, Hagani Business Centre1 Hagani Street, Baku, AZE 1010

Tel: 0099 412 4933365 Fax: 0099 412 932453


R&M Assembly DivisionUnit 15, Solent Industrial Estate

Shamblehurst Lane, Hedge End SO30 2FQTel: 01489 799888


R&M Fixings & Supports LimitedUnit 6, Central Trading Centre

Marine Parade, Southampton SO14 5JPTel: 023 8038 6800 Fax: 023 8038 6808


R&M Neyland BranchUnit 10, Honeyborough Industrial Estate

Neyland, Milford Haven SA73 1SETel: 01646 601 879 Fax: 01646 603 806


R&M Projects DivisionUnit 1 & 2, 362A Spring Road, Sholing,

Southampton Hampshire SO19 2PBTel: 023 8068 6620 Fax: 023 8068 5673


R&M Wholesale Electric LLC (Abu-Dhabi)Office No. 11

Mussafah MW5 / 14, Abu DhabiTel: 00971 (0)2 5503370 Fax: 00971 (0)2 5503220


R&M Electrical Group LLP (Kazakhstan)Room 2, Building 7, Azattyk Avenue

Atyrau 06000, KazakhstanTel: 007 7122 320 726 Fax: 007 7122 320714


R&M Cables Division111C Severnside Trading Estate,

Burcott Road, Avonmouth, Bristol B11 8ABTel: 0117 982 4402 Fax: 0117 982 4406


R&M Lighting DivisionUnit 1 & 2, 362A Spring Road, SholingSouthampton, Hampshire SO19 2PB

Tel: 07525 401 507 Fax: 023 8044 4366Email: [email protected]

R&M Oxford BranchPeterley Road, Horspath Industrial Estate

Cowley, Oxford OX4 2TZTel: 01865 395 353 Fax: 01865 777 180


R&M Southampton BranchUnit 1, Central Trading Estate

Marine Parade, Southampton SO14 5JPTel: 023 8023 1800 Fax: 023 8023 1818Email: [email protected]

R&M Wholesale Electric LLC (Dubai)M-03 Al Joud Centre , Al Quoz 1

PO BOX 282566, Dubai, UAETel: 0097 143 468240 Fax: 0097 143 468241


Siraj Naybur (Iraq)Manawi Basha, Basrah

IraqTel: 00964 7811125188Email: [email protected]

www.rm-electrical.com

Group Directory

DISCLAIMER: Technical information contained in this catalogue is for reference only and R&M Electrical Group Ltd can not be held liable for any information therein.

R&M Specialist Catalogue

Documents

Transcript of R&M Specialist Catalogue