RL Seriesroyalfilter.com/wp-content/uploads/Pleated-Cellulose-Cartridges-RL... · The RL series...
Transcript of RL Seriesroyalfilter.com/wp-content/uploads/Pleated-Cellulose-Cartridges-RL... · The RL series...
PLEATED CELLULOSE CARTRIDGES
RL SERIES
RL Series The RL series cartridges have been designed for removal of
contaminants from both liquids and gases where nominal
filtration is required. The RL series cartridge media is
manufactured using a phenolic resin impregnated cellulose
media that is heat cured for strength and durability. Tin-Plated
steel components, thermosetting PVC adhesives and Buna N
gaskets are used to fabricate Royal liquid filter elements. Other
gasket materials, and end capping adhesives are also available
when required. Center cores are made from helical wrapped
tin-plated steel to prevent collapse at high differential pressure.
When external cages are specified, these are also made with Tin
-plated steel, that are perforated, and lock seamed to provide
added durability for tough applications. The tin plating also
prevents corrosion.
The RL Series filter cartridges provides a high surface area that
offers maximum dirt holding capacity, high flow rate, and a low
initial differential pressure drop. The normal flow direction for
these cartridges if from outside to inside.
These cartridges can be made in a wide variety of single length
integral elements allowing for the ease of change outs, a
reduction in labor costs, eliminating the need for center seals
that may cause bypass.
Retrofit cartridges are available for most manufacturers and
OEM’s. Many additional options are available such as handles,
threaded end connections, single open end elements and PVC
and Polypropylene outer netting. If you have special design
requirements, please contact our sales department for
assistance.
Product Specifications
• pH range: 5 to 9
• Maximum Differential Pressure: 75 psid
• Maximum Operating Temperature: 250 F
• Media: Phenolic Impregnated Cellulose
• Center Core: Tin-Plated steel helical wrapped
• Gaskets: Buna N (other options available)
• Bonding Adhesive: Thermosetting PVC, Epoxy
Performance
Initial Filtration efficiencies for Royal Nominal series cartridges
range from 80 to 95%. If higher efficiencies are necessary, please
refer to our RL-AB series high efficiency cartridges.
Royal Filter can provide replacements for the following manufac-
turers and many others:
Allen Flo Line Nugent
Baldwin Fram Peco
Banner/Parker Fluitek Purolator
Cooper Bessemer General Electric Refilco
Commercial/Parker Hilco Texas Filtration
Cuno Kaydon United Engine Life
Facet Murphy Velcon
Automotive Aviation Amines Chemicals
Drilling Rigs Dust Control Condensate Cooling Oils
EDM Machining Generators Diesel Fuels Gasoline
Foundries Machine Tooling Lube Oils Hydraulic Oils
Marine Petrochemicals Jet Fuel Plating Solutions
Refining Plating Process Water Solvents
Natural Gas Mining Transformer Oils Turbine Oils
FILTER ELEMENT NUMBERING SYSTEM
Options
A = No Outer Body
C = Cork gaskets with Outer Body
EX = Epoxy Adhesive
H = Cork Gaskets, with Outer Body and Handle
G = Neoprene Gaskets
V = Viton Gaskets
VF = Vegetable Fiber Gaskets
1 = Special ID
2 = Buna Grommet Seals, handle
3 = Special Size, Hilco Replacement
Notes:
1. Elements are available in the following standard micron ratings—2. 5. 10, 15, 25, and 40. Special Ratings are available on request.
2. Elements with other micron ratings have the same dimensions as the 5 micron filters listed on the following table.
Part Number OD Length ID Special Features
RL-1011-5-H 10 1/4 11 3/16 1 15/16 EDM Filter, handle, no outer body
RL-310-5 2 1/2 9 7/8 1 1/16
RL-310-5-3 2 1/2 9 3/4 1 1/16 Hilco Replacement
RL-310-5-3A 2 1/2 9 3/4 1 1/16 Hilco Replacement, no outer body
RL-310-5-VF 2 1/2 9 11/16 1 1/16 Vegetable Fiber Gaskets
RL-320-5 2 1/2 19 3/4 1 1/16
RL-326-5 2 1/2 26 1/2 1 1/16 Cooper Replacement
RL-329-5 2 1/2 29 1/4 1 1/16
RL-330-5 2 1/2 29 5/8 1 1/16
RL-336-5-S 3 35 3/4 1 1/2 Single open end with/spring
RL-339-5 2 1/2 39 1 1/16
RL-340-5 2 1/2 40 1 1/16
RL-412-5 4 12 1/4 1 5/8
NOMINAL PLEATED CELLULOSE ELEMENT SPECIFICATIONS
Markets Applications
Part Number OD Length ID Special Features
RL-418-5 4 18 1/4 1 5/8
RL-424-5 4 24 1 5/8
RL-436-5-3 4 1/2 36 3 1/8 Hilco Replacement
RL-509-5 4 1/2 9 1 3/4
RL-511-5 4 1/2 11 1 3/4
RL-512-05 5 5/8 12 1/4 1 7/8 Velcon Replacement, O-ring seal
RL-518-5 4 1/2 17 7/8 1 3/4
RL-518-5-3 4 1/2 17 7/8 2 5/8 Hilco Replacement
RL-519-5 5 19 1/4 2 9/16
RL-523-5 4 1/4 23 1/2 1 3/4 Kaydon Replacement
RL-528-5 5 28 1/2 2 9/16
RL-607-5 6 7 1/2 1 3/4 Purolator Replacement
RL-607.5-5 6 7 7/8 1 3/4 Hoffman Replacement
RL-608-5B 6 8 1/4 3 1/2 Buna N gaskets
RL-614-5 6 14 1/2 3 1/2
RL-614-5-1 6 14 5/8 1 EDM, Grommet seals, handle
RL-614-5-2 6 14 1/2 1 1/4 EDM, Buna Grommet seals, handle
RL-614-5-21 6 14 1 1/4 EDM, Cork gaskets, outer body, handle
RL-614-5-3 6 14 1 1/4 EDM, Cork gaskets
RL-618-5 6 18 3 1/2 Peco Replacement
RL-618-5-3 6 18 3 3/16 Hilco Replacement, core, outer body
RL-629-5 6 29 3 1/2
RL-629-5-2 6 29 1 1/4 Double Length RL-614-5-2
RL-636-5 6 36 3 1/2 Peco Replacement , double length
RL-644-5 6 44 3 1/2
RL-644-5-4 6 44 3 13/16 Facet replacement, no outer body, no core
RL-644-5TB 6 1/8 45 4 1/2
RL-656-5 6 56 3 1/2 Facet/Velcon Replacement
RL-656-5TB 6 1/8 57 4 1/2
RL-7003 7 3/8 10 1/8 2 13/16 Caterpillar Replacement
RL-7003-3 7 3/8 30 13/32 2 13/16 Triple Length Caterpillar Replacement
RL-7012 7 5/16 13 11/16 3 9/16 Caterpillar Replacement
RL-716-5 6 16 2 5/8 Keene Replacement
RL-718-05 6 18 2 5/8 Velcon Replacement
RL-718-5 6 18 2 5/8
RL-718-5-1 6 18 2 1/8 Hilco Replacement, Small ID
RL-718-5-1H 6 18 2 1/8 Small ID, cork gaskets, handle
RL-718-5-3 6 18 3 3/16 Hilco Replacement, no cage, no core
RL-718-5-C 6 18 2 5/8 Cork Gaskets
RL-718-5-H 6 18 2 5/8 Cork Gaskets, Handle
RL-718-5B-H 6 18 2 5/8 Parker Replacement, Buna N, handle
RL-718-5T 6 18 1/2 2 5/16 3” Thread Base, Filterdyne replacement
RL-723-156 6 23 2 5/8 Expanded Body, Buna Gaskets, handle
RL-736-6 6 36 2 5/8
RL-754-5 6 54 2 5/8
Rev 2018.01 – RL
Royal Filter Manufacturing Company
4327 South Fourth Street
Chickasha, OK 73018
Phone: (405) 224—0229
Toll Free: (800) 256—2559
Fax: (405) 224—9174
Royal Filter specializes in quality liquid and air filter products for a wide variety
of industrial applications.
Royal Filter utilizes the latest modern manufacturing
techniques and equipment. Our pleaters and cure
ovens give us the capability to produce a variety of
different elements, utilizing single piece construction
up to 60” in length. Working with our long term
suppliers and continuous improvement training with
our employees with an emphasis on quality, we offer a
superior product at a competitive price.
Our modern 60,000 square foot manufacturing facility
is designed to allow a smooth and efficient flow of
products, from incoming raw materials to outgoing
shipments of finished products. This helps to ensure
prompt, on time deliveries.
Our elements are constructed of the highest quality
components. Many different cartridge configurations,
media, and materials of construction are available to fit
you specific application.
Please visit our website at www.royalfilter.com
SUPERIOR CUSTOMER SERVICE
• Toll Free number for technical service or product
information: 1-800-256-2559.
• LTL shipments are palletized at no charge
• 99% Efficiency on shipping order(s) per terms of
agreement.
• Our central location reduces freight costs and transit
time.
• Drop ship to your customers for shorter delivery
times and shipping costs.
• Third party freight billing and freight quotes are
available at no additional charge.
• Excellent competitor and OEM cross reference
information available.
• Special elements can be designed, tested, and
manufactured to customer specifications.
• A firm commitment from ROYAL FILTER
MANUFACTURING to excellence in product quality,
customer service, and price.
For the Royal Filter Distributor nearest you,
contact:
MADE IN THE USA